Date   

moderated Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

Jim Pursley
 

Brilliant, Adrian. 

On 5/23/2020 12:56 PM, Adrian Spratt wrote:

Jim,

The easiest way I know is the following:

Place focus at the filename in the folder where you have the file.

Copy with control-c.

Create the message you wish to send.

Place focus in the body of the message, and paste with control-v.

It’s counterintuitive, but the file will show up as an attachment, not as part of the message body.

I hope this works for you.


moderated Re: Udacity web

Chris Hill
 

I strongly suspect windows 7 is your problem if everything else you are running is up to date.  Some things may still seem usable, but windows 7 needs to be put out to pasture.




On 5/24/2020 09:26, romance's prince via groups.io wrote:
hello dears
i success to navigate only either by using jaws cursor, or, turn off vertual cursor
but when off vertual cursor all web shortcut are off and only key to move is tap key.
do you think its windows7 issue?
  thanks


moderated Re: How To Locate The Path To A Specific Outlook Address Book

Bill White
 

I don't know what form the name will take, as I only have one account for my addressbook, and it is incorporated into the Outlook data file.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Sunday, May 24, 2020 7:46 AM
To: main@jfw.groups.io
Subject: Re: How To Locate The Path To A Specific Outlook Address Book

 

Thanks, bill.

 

I’ll give these suggestions a try.

 

Am I correct in saying that the file will be called g-mail address book, as it is in Outlook when I arrow up and down my various address books after shift-tabbing into the address book  list?

 

After I find the file, my next task will be trying to figure out what format the address book needs to be in for the Polaris note-taker.  I assume .csv, but will have to check the manual.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Saturday, May 23, 2020 11:25 PM
To: main@jfw.groups.io
Subject: Re: How To Locate The Path To A Specific Outlook Address Book

 

Hi, Tom. The file path to your addressbook should be in one of the following two locations,

 

1. Windows 10 drive:\Users\<username>\AppData\Local\Microsoft\Outlook.

2. Windows 10 drive:\Users\<username>\Roaming\Local\Microsoft\Outlook.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Saturday, May 23, 2020 7:59 PM
To: jfw list
Subject: How To Locate The Path To A Specific Outlook Address Book

 

Hello, everyone.

              

I am trying to import my personal g-mail address book from Outlook 2019 and Office 365 into a Polaris Braille Note-taker.

 

Can someone tell me how I can find the file path to that specific address book?

 

My Outlook e-mail through Office 365 has multiple address books, since I also access my University e-mail account via the University’s exchange e-mail server.

 

I can get to the list of my address books in Outlook via the shift-tab and arrow keys, but that does not tell me the specific file path location for the specific address book I’m looking for.

 

I have asked the Microsoft Accessibility folks to help me locate and export this address book, but they never seemed to come up with the right one.  Plus, whatever they came up with was a very messy file once I saved it into a .csv file.

 

Any help with this dilemma would be appreciated.

 

Tom Behler

 

 


moderated JAWS Error Message "The FS default scripts were not found while loading scripts ... ." Happening at Start After Tweaking Scripts

Richard B. McDonald
 

Hi!

 

I made a very minor tweak to the default JAWS 2020 script file.  After that tweak, I get an error message when JAWS starts.  The error message says something like “The Freedom Scientific default script file could not be found when loading scripts.  This may cause problems.  It is recommended that these default scripts be found.”

 

The tweak to the default script file I made was simply to add at the very end of it an assignment of my “PrintScreen” key to the “ApplicationsKey” (shift+f10).  I do not think there is an error in my script.  I have done  it in earlier versions of JAWS (e.g., 2019) without this problem.

 

So, why is this happening?  How can I fix it?

 

Thanks,

Richard


moderated Re: How To Locate The Path To A Specific Outlook Address Book

Tom Behler
 

Thanks, bill.

 

I’ll give these suggestions a try.

 

Am I correct in saying that the file will be called g-mail address book, as it is in Outlook when I arrow up and down my various address books after shift-tabbing into the address book  list?

 

After I find the file, my next task will be trying to figure out what format the address book needs to be in for the Polaris note-taker.  I assume .csv, but will have to check the manual.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Saturday, May 23, 2020 11:25 PM
To: main@jfw.groups.io
Subject: Re: How To Locate The Path To A Specific Outlook Address Book

 

Hi, Tom. The file path to your addressbook should be in one of the following two locations,

 

1. Windows 10 drive:\Users\<username>\AppData\Local\Microsoft\Outlook.

2. Windows 10 drive:\Users\<username>\Roaming\Local\Microsoft\Outlook.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Saturday, May 23, 2020 7:59 PM
To: jfw list
Subject: How To Locate The Path To A Specific Outlook Address Book

 

Hello, everyone.

              

I am trying to import my personal g-mail address book from Outlook 2019 and Office 365 into a Polaris Braille Note-taker.

 

Can someone tell me how I can find the file path to that specific address book?

 

My Outlook e-mail through Office 365 has multiple address books, since I also access my University e-mail account via the University’s exchange e-mail server.

 

I can get to the list of my address books in Outlook via the shift-tab and arrow keys, but that does not tell me the specific file path location for the specific address book I’m looking for.

 

I have asked the Microsoft Accessibility folks to help me locate and export this address book, but they never seemed to come up with the right one.  Plus, whatever they came up with was a very messy file once I saved it into a .csv file.

 

Any help with this dilemma would be appreciated.

 

Tom Behler

 

 


moderated Re: Udacity web

romance's prince
 

hello dears
i success to navigate only either by using jaws cursor, or, turn off vertual cursor
but when off vertual cursor all web shortcut are off and only key to move is tap key.
do you think its windows7 issue?
  thanks


moderated Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

Louise Johnson
 

Hi okay here is one more way to attach a document.

1.       Go to documents first select the document and clip to clip board.

2.       You then go to outlook if that is where you are emailing from. You to this to get the attachment in. You paste it in. it will start the new email and you then can add email address.

3.       You then can go to subject line and the name of the document is there. I will share what I do then. I hit the end key of line and back over doc. And then tab once and you will see the document is there then tab and write your message and send.

I hope this helps all if you have question please ask.

 

I do this I find it faster over all.

 

Louise and princess Kiara

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of James Malone
Sent: Saturday, May 23, 2020 2:05 PM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

If you do a alt plus n in the messages group you can find the insert key.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marie
Sent: Saturday, May 23, 2020 12:58 PM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Oh I meant that the copy and paste method worked. In Outlook menus I do not find any insert option. So I am apparently confused. LOL!

Marie

 

 

From: Dan Longmore

Sent: Saturday, May 23, 2020 12:42 PM

Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Ok, I open the menus, select “Insert” and then down arrow places me in “Attach file” option and there are others if so desired.  I use this fairly often to get to recent documents and I can go anywhere in the Explorer tree to grab an item.

Glad it worked

.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marie
Sent: Saturday, May 23, 2020 3:33 PM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

OH, I just tried it again and it worked just fine. I thought I did it exactly the same the first time, but must have done something wrong.

Marie

 

 

From: Dan Longmore

Sent: Saturday, May 23, 2020 11:56 AM

Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

You can also do insert and attach file from Outlook menu.  This places the attachment on its own line above the message.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim Rawls
Sent: Saturday, May 23, 2020 2:55 PM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Thanks for this. I appreciate your help. Jim

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Saturday, May 23, 2020 8:51 AM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Jim, in case Jessica’s reply wasn’t enough to remind you, she means just go to whatever file you want to attach using File Explorer, copy it to the clipboard with Control + C, then go to Outlook and start your message, put in the recipient and subject and once you are in the message body field use Control + V to paste, this will attach the file as a proper attachment. You can then write your message and send. Of course you can first address the email, fill in the subject and write what you want to write and use the steps above last to attach your file, only thing to remember is that you have to be in the message body field when you press Control + V to paste in your file, it will not work to attach it if you are in the subject or any other header field.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Saturday, May 23, 2020 8:43 AM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Hi,

I typically just use copy/paste.

I hope this helps.

 

Regards,

Jessica

 

On May 23, 2020, at 11:41 AM, Jim Rawls <jazzpiano@...> wrote:



Hi all, I have forgotten how to do it, so thanks for your help in this matter. Jim


moderated Re: How To Locate The Path To A Specific Outlook Address Book

Bill White
 

Hi, Tom. The file path to your addressbook should be in one of the following two locations,

 

1. Windows 10 drive:\Users\<username>\AppData\Local\Microsoft\Outlook.

2. Windows 10 drive:\Users\<username>\Roaming\Local\Microsoft\Outlook.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Saturday, May 23, 2020 7:59 PM
To: jfw list
Subject: How To Locate The Path To A Specific Outlook Address Book

 

Hello, everyone.

              

I am trying to import my personal g-mail address book from Outlook 2019 and Office 365 into a Polaris Braille Note-taker.

 

Can someone tell me how I can find the file path to that specific address book?

 

My Outlook e-mail through Office 365 has multiple address books, since I also access my University e-mail account via the University’s exchange e-mail server.

 

I can get to the list of my address books in Outlook via the shift-tab and arrow keys, but that does not tell me the specific file path location for the specific address book I’m looking for.

 

I have asked the Microsoft Accessibility folks to help me locate and export this address book, but they never seemed to come up with the right one.  Plus, whatever they came up with was a very messy file once I saved it into a .csv file.

 

Any help with this dilemma would be appreciated.

 

Tom Behler

 

 


moderated How To Locate The Path To A Specific Outlook Address Book

Tom Behler
 

Hello, everyone.

              

I am trying to import my personal g-mail address book from Outlook 2019 and Office 365 into a Polaris Braille Note-taker.

 

Can someone tell me how I can find the file path to that specific address book?

 

My Outlook e-mail through Office 365 has multiple address books, since I also access my University e-mail account via the University’s exchange e-mail server.

 

I can get to the list of my address books in Outlook via the shift-tab and arrow keys, but that does not tell me the specific file path location for the specific address book I’m looking for.

 

I have asked the Microsoft Accessibility folks to help me locate and export this address book, but they never seemed to come up with the right one.  Plus, whatever they came up with was a very messy file once I saved it into a .csv file.

 

Any help with this dilemma would be appreciated.

 

Tom Behler

 

 


moderated Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

Marie
 

Oh, I was being stupid today. I was looking for the insert menu when I did not have a message open. I should know better.Thanks for being patient.
Marie
 
 

From: James Malone
Sent: Saturday, May 23, 2020 2:04 PM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?
 

If you do a alt plus n in the messages group you can find the insert key.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marie
Sent: Saturday, May 23, 2020 12:58 PM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Oh I meant that the copy and paste method worked. In Outlook menus I do not find any insert option. So I am apparently confused. LOL!

Marie

 

 

From: Dan Longmore

Sent: Saturday, May 23, 2020 12:42 PM

To: main@jfw.groups.io

Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Ok, I open the menus, select “Insert” and then down arrow places me in “Attach file” option and there are others if so desired.  I use this fairly often to get to recent documents and I can go anywhere in the Explorer tree to grab an item.

Glad it worked

.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marie
Sent: Saturday, May 23, 2020 3:33 PM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

OH, I just tried it again and it worked just fine. I thought I did it exactly the same the first time, but must have done something wrong.

Marie

 

 

From: Dan Longmore

Sent: Saturday, May 23, 2020 11:56 AM

To: main@jfw.groups.io

Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

You can also do insert and attach file from Outlook menu.  This places the attachment on its own line above the message.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim Rawls
Sent: Saturday, May 23, 2020 2:55 PM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Thanks for this. I appreciate your help. Jim

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Saturday, May 23, 2020 8:51 AM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Jim, in case Jessica’s reply wasn’t enough to remind you, she means just go to whatever file you want to attach using File Explorer, copy it to the clipboard with Control + C, then go to Outlook and start your message, put in the recipient and subject and once you are in the message body field use Control + V to paste, this will attach the file as a proper attachment. You can then write your message and send. Of course you can first address the email, fill in the subject and write what you want to write and use the steps above last to attach your file, only thing to remember is that you have to be in the message body field when you press Control + V to paste in your file, it will not work to attach it if you are in the subject or any other header field.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Saturday, May 23, 2020 8:43 AM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Hi,

I typically just use copy/paste.

I hope this helps.

 

Regards,

Jessica

 

On May 23, 2020, at 11:41 AM, Jim Rawls <jazzpiano@...> wrote:



Hi all, I have forgotten how to do it, so thanks for your help in this matter. Jim


moderated Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

James Malone
 

If you do a alt plus n in the messages group you can find the insert key.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marie
Sent: Saturday, May 23, 2020 12:58 PM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Oh I meant that the copy and paste method worked. In Outlook menus I do not find any insert option. So I am apparently confused. LOL!

Marie

 

 

From: Dan Longmore

Sent: Saturday, May 23, 2020 12:42 PM

Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Ok, I open the menus, select “Insert” and then down arrow places me in “Attach file” option and there are others if so desired.  I use this fairly often to get to recent documents and I can go anywhere in the Explorer tree to grab an item.

Glad it worked

.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marie
Sent: Saturday, May 23, 2020 3:33 PM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

OH, I just tried it again and it worked just fine. I thought I did it exactly the same the first time, but must have done something wrong.

Marie

 

 

From: Dan Longmore

Sent: Saturday, May 23, 2020 11:56 AM

Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

You can also do insert and attach file from Outlook menu.  This places the attachment on its own line above the message.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim Rawls
Sent: Saturday, May 23, 2020 2:55 PM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Thanks for this. I appreciate your help. Jim

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Saturday, May 23, 2020 8:51 AM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Jim, in case Jessica’s reply wasn’t enough to remind you, she means just go to whatever file you want to attach using File Explorer, copy it to the clipboard with Control + C, then go to Outlook and start your message, put in the recipient and subject and once you are in the message body field use Control + V to paste, this will attach the file as a proper attachment. You can then write your message and send. Of course you can first address the email, fill in the subject and write what you want to write and use the steps above last to attach your file, only thing to remember is that you have to be in the message body field when you press Control + V to paste in your file, it will not work to attach it if you are in the subject or any other header field.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Saturday, May 23, 2020 8:43 AM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Hi,

I typically just use copy/paste.

I hope this helps.

 

Regards,

Jessica

 

On May 23, 2020, at 11:41 AM, Jim Rawls <jazzpiano@...> wrote:



Hi all, I have forgotten how to do it, so thanks for your help in this matter. Jim


moderated Re: alert open emty document

Amir Shah
 

               Okay, thank you  guys for the  help

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Malone
Sent: Saturday, May 23, 2020 4:01 AM
To: main@jfw.groups.io
Subject: Re: alert open emty document

 

Hi Amir, James Malone here. Try Alt space, O for OCR, then press the letter d so Jaws can Scan the document.

Hope this helps.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Amir Shah
Sent: Friday, May 22, 2020 4:07 PM
To: jfw@groups.io
Subject: alert open emty document

 

Hi guys my name is amir shah. I am using jaws 2020 on my machine. When I receive  a attachment,  When I open the attachment jaws will alert me with a message that “say” alert open empty document . before when I open the attachment jaws will  let me no if I want to  scan the document even when I scan the document it will  say the same thing.  So what do I do. Thank you  for any  suggestion  


moderated Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

Monica S
 

Hi Jim, to attach a file to an email message, I press Alt and then hit your right arrow once until you hear the word Insert. Then press the tab key once and you’ll hear Attach file. Press the Enter key and then I believe you can press the Tab key to navigate to find your file you want?

 

I hope this helps.

 

Monica

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim Rawls
Sent: Saturday, May 23, 2020 10:42 AM
To: jazzpiano@...
Subject: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Hi all, I have forgotten how to do it, so thanks for your help in this matter. Jim


moderated Re: Udacity web

Chris Hill
 


I am running latest jaws with windows 10, it didn't read all that well with firefox, until I alt-tabbed out and back in, then it worked better.  It worked fine right off the bat with the latest version of chrome.  I suspect your problem is windows 7.



On 5/23/2020 15:10, romance's prince via groups.io wrote:

hello dears
 
I'm facing a strange problem with Jaws 2019
unable to read anything via jaws in udacity.com
it not read any links, headings, or forms.
NVDA read it almost fine
so what's the problem which let jaws unable to access this eLearning site?
tested with chrome & Firefox latest version, OS. windows-7.
  any help will be appreciated.
   


moderated Udacity web

romance's prince
 


hello dears
 
I'm facing a strange problem with Jaws 2019
unable to read anything via jaws in udacity.com
it not read any links, headings, or forms.
NVDA read it almost fine
so what's the problem which let jaws unable to access this eLearning site?
tested with chrome & Firefox latest version, OS. windows-7.
  any help will be appreciated.
   


moderated Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

Marie
 

Oh I meant that the copy and paste method worked. In Outlook menus I do not find any insert option. So I am apparently confused. LOL!
Marie
 
 

From: Dan Longmore
Sent: Saturday, May 23, 2020 12:42 PM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?
 

Ok, I open the menus, select “Insert” and then down arrow places me in “Attach file” option and there are others if so desired.  I use this fairly often to get to recent documents and I can go anywhere in the Explorer tree to grab an item.

Glad it worked

.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marie
Sent: Saturday, May 23, 2020 3:33 PM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

OH, I just tried it again and it worked just fine. I thought I did it exactly the same the first time, but must have done something wrong.

Marie

 

 

From: Dan Longmore

Sent: Saturday, May 23, 2020 11:56 AM

To: main@jfw.groups.io

Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

You can also do insert and attach file from Outlook menu.  This places the attachment on its own line above the message.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim Rawls
Sent: Saturday, May 23, 2020 2:55 PM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Thanks for this. I appreciate your help. Jim

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Saturday, May 23, 2020 8:51 AM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Jim, in case Jessica’s reply wasn’t enough to remind you, she means just go to whatever file you want to attach using File Explorer, copy it to the clipboard with Control + C, then go to Outlook and start your message, put in the recipient and subject and once you are in the message body field use Control + V to paste, this will attach the file as a proper attachment. You can then write your message and send. Of course you can first address the email, fill in the subject and write what you want to write and use the steps above last to attach your file, only thing to remember is that you have to be in the message body field when you press Control + V to paste in your file, it will not work to attach it if you are in the subject or any other header field.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Saturday, May 23, 2020 8:43 AM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Hi,

I typically just use copy/paste.

I hope this helps.

 

Regards,

Jessica

 

On May 23, 2020, at 11:41 AM, Jim Rawls <jazzpiano@...> wrote:



Hi all, I have forgotten how to do it, so thanks for your help in this matter. Jim


moderated Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

Dan Longmore
 

Ok, I open the menus, select “Insert” and then down arrow places me in “Attach file” option and there are others if so desired.  I use this fairly often to get to recent documents and I can go anywhere in the Explorer tree to grab an item.

Glad it worked

.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marie
Sent: Saturday, May 23, 2020 3:33 PM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

OH, I just tried it again and it worked just fine. I thought I did it exactly the same the first time, but must have done something wrong.

Marie

 

 

From: Dan Longmore

Sent: Saturday, May 23, 2020 11:56 AM

Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

You can also do insert and attach file from Outlook menu.  This places the attachment on its own line above the message.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim Rawls
Sent: Saturday, May 23, 2020 2:55 PM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Thanks for this. I appreciate your help. Jim

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Saturday, May 23, 2020 8:51 AM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Jim, in case Jessica’s reply wasn’t enough to remind you, she means just go to whatever file you want to attach using File Explorer, copy it to the clipboard with Control + C, then go to Outlook and start your message, put in the recipient and subject and once you are in the message body field use Control + V to paste, this will attach the file as a proper attachment. You can then write your message and send. Of course you can first address the email, fill in the subject and write what you want to write and use the steps above last to attach your file, only thing to remember is that you have to be in the message body field when you press Control + V to paste in your file, it will not work to attach it if you are in the subject or any other header field.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Saturday, May 23, 2020 8:43 AM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Hi,

I typically just use copy/paste.

I hope this helps.

 

Regards,

Jessica

 

On May 23, 2020, at 11:41 AM, Jim Rawls <jazzpiano@...> wrote:



Hi all, I have forgotten how to do it, so thanks for your help in this matter. Jim


moderated Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

Marie
 

OH, I just tried it again and it worked just fine. I thought I did it exactly the same the first time, but must have done something wrong.
Marie
 
 

From: Dan Longmore
Sent: Saturday, May 23, 2020 11:56 AM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?
 

You can also do insert and attach file from Outlook menu.  This places the attachment on its own line above the message.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim Rawls
Sent: Saturday, May 23, 2020 2:55 PM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Thanks for this. I appreciate your help. Jim

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Saturday, May 23, 2020 8:51 AM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Jim, in case Jessica’s reply wasn’t enough to remind you, she means just go to whatever file you want to attach using File Explorer, copy it to the clipboard with Control + C, then go to Outlook and start your message, put in the recipient and subject and once you are in the message body field use Control + V to paste, this will attach the file as a proper attachment. You can then write your message and send. Of course you can first address the email, fill in the subject and write what you want to write and use the steps above last to attach your file, only thing to remember is that you have to be in the message body field when you press Control + V to paste in your file, it will not work to attach it if you are in the subject or any other header field.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Saturday, May 23, 2020 8:43 AM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Hi,

I typically just use copy/paste.

I hope this helps.

 

Regards,

Jessica

 

On May 23, 2020, at 11:41 AM, Jim Rawls <jazzpiano@...> wrote:



Hi all, I have forgotten how to do it, so thanks for your help in this matter. Jim


moderated Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

Marie
 

What do you to to get an insert option? I find nothing on the menus to do this.
When I followed the directions to paste a link to the file, the email did not get sent. And I received a notification that it was undeliverable but no other explanation and no way to open the notification? Really strange behavior.
Marie
 
 

From: Dan Longmore
Sent: Saturday, May 23, 2020 11:56 AM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?
 

You can also do insert and attach file from Outlook menu.  This places the attachment on its own line above the message.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim Rawls
Sent: Saturday, May 23, 2020 2:55 PM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Thanks for this. I appreciate your help. Jim

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Saturday, May 23, 2020 8:51 AM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Jim, in case Jessica’s reply wasn’t enough to remind you, she means just go to whatever file you want to attach using File Explorer, copy it to the clipboard with Control + C, then go to Outlook and start your message, put in the recipient and subject and once you are in the message body field use Control + V to paste, this will attach the file as a proper attachment. You can then write your message and send. Of course you can first address the email, fill in the subject and write what you want to write and use the steps above last to attach your file, only thing to remember is that you have to be in the message body field when you press Control + V to paste in your file, it will not work to attach it if you are in the subject or any other header field.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Saturday, May 23, 2020 8:43 AM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Hi,

I typically just use copy/paste.

I hope this helps.

 

Regards,

Jessica

 

On May 23, 2020, at 11:41 AM, Jim Rawls <jazzpiano@...> wrote:



Hi all, I have forgotten how to do it, so thanks for your help in this matter. Jim


moderated Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

Dan Longmore
 

You can also do insert and attach file from Outlook menu.  This places the attachment on its own line above the message.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim Rawls
Sent: Saturday, May 23, 2020 2:55 PM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Thanks for this. I appreciate your help. Jim

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Saturday, May 23, 2020 8:51 AM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Jim, in case Jessica’s reply wasn’t enough to remind you, she means just go to whatever file you want to attach using File Explorer, copy it to the clipboard with Control + C, then go to Outlook and start your message, put in the recipient and subject and once you are in the message body field use Control + V to paste, this will attach the file as a proper attachment. You can then write your message and send. Of course you can first address the email, fill in the subject and write what you want to write and use the steps above last to attach your file, only thing to remember is that you have to be in the message body field when you press Control + V to paste in your file, it will not work to attach it if you are in the subject or any other header field.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Saturday, May 23, 2020 8:43 AM
To: main@jfw.groups.io
Subject: Re: how do you attach something to an email message using outlook 2016 and jaws 2020?

 

Hi,

I typically just use copy/paste. 

I hope this helps. 

 

Regards,

Jessica

 

On May 23, 2020, at 11:41 AM, Jim Rawls <jazzpiano@...> wrote:



Hi all, I have forgotten how to do it, so thanks for your help in this matter. Jim