Date   

moderated Re: Keystrokes for Developer toolbar in Office 365

 

On Wed, Apr 14, 2021 at 11:32 AM, Don Mauck wrote:
you are using Office2016 and not Office365 correct?
-
As am I.  But since Office 2016 is the code base for all versions afterward, and the Developer ribbon hasn't changed in a very long time, the shortcuts remain the same.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

There are many who labor under the gross misapprehension that the Constitution is a cage and a laundry-list rather than a framework upon which great things have been and still will be built. Many things that are entirely Constitutional are not "in the Constitution," but are allowed under it.

            ~Brian Vogel


moderated Re: Keystrokes for Developer toolbar in Office 365

 

There is no Radio Button option in the Legacy Tools section (which you do reach via ALT+L,N).  The Radio Button is in the ActiveX control section and it is noted as "Option Button" while what most of us would call a button is noted as "Command Button."

The direct key sequence for an ActiveX radio button is ALT+L,N,O (Option button) and for a command button is ALT+L,N,U

I personally hate the ActiveX controls and avoid them, but others love 'em.  All of these announced, item by item, if I right arrow through the Legacy Controls Group then transition into the ActiveX controls group once the end of the Legacy Controls has been passed when I'm using NVDA.
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

There are many who labor under the gross misapprehension that the Constitution is a cage and a laundry-list rather than a framework upon which great things have been and still will be built. Many things that are entirely Constitutional are not "in the Constitution," but are allowed under it.

            ~Brian Vogel


moderated Re: Keystrokes for Developer toolbar in Office 365

Don Mauck
 

Thanks. Since you’re the first to respond, to be clear, you are using Office2016 and not Office365 correct?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via groups.io
Sent: Wednesday, April 14, 2021 9:26 AM
To: main@jfw.groups.io
Subject: [External] : Re: Keystrokes for Developer toolbar in Office 365

 

If I hit alt, then L, then N in Word 2016, I hear Legacy Tools table, but there is very little in that table that JAWS is reading. I don’t know how much should be there. I seem to have better luck just tabbing through the options on the Developer ribbon to see drop down boxes, checkboxes, etc.  I haven’t found any radio button option yet. 

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Don Mauck
Sent: Tuesday, April 13, 2021 10:06 AM
To: main@jfw.groups.io; JAWS Private Beta Group <JAWSBETA@...>
Subject: Keystrokes for Developer toolbar in Office 365

 

WARNING: This email originated externally. Exercise caution. Think before clicking links or opening attachments.

 

I’m cross posting hoping that I can see if this is a bug or if I’m doing something crazy.

I’m trying to create “Radio Buttons” from the developer toolbar in Word using Office 365.

I think I should be able to do that from the Developer toolbar, (alt+l). Then I should be able to press “n” to get into the Legacy Menu. I cannot get that keystroke to work. Not in JAWS2020 or the latest release of JAWS2021. Can someone please tell me if there’s a better way to create the “Radio buttons,” as I know it can be done.

 

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: Keystrokes for Developer toolbar in Office 365

Van Lant, Robin
 

If I hit alt, then L, then N in Word 2016, I hear Legacy Tools table, but there is very little in that table that JAWS is reading. I don’t know how much should be there. I seem to have better luck just tabbing through the options on the Developer ribbon to see drop down boxes, checkboxes, etc.  I haven’t found any radio button option yet. 

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Don Mauck
Sent: Tuesday, April 13, 2021 10:06 AM
To: main@jfw.groups.io; JAWS Private Beta Group <JAWSBETA@...>
Subject: Keystrokes for Developer toolbar in Office 365

 

WARNING: This email originated externally. Exercise caution. Think before clicking links or opening attachments.

 

I’m cross posting hoping that I can see if this is a bug or if I’m doing something crazy.

I’m trying to create “Radio Buttons” from the developer toolbar in Word using Office 365.

I think I should be able to do that from the Developer toolbar, (alt+l). Then I should be able to press “n” to get into the Legacy Menu. I cannot get that keystroke to work. Not in JAWS2020 or the latest release of JAWS2021. Can someone please tell me if there’s a better way to create the “Radio buttons,” as I know it can be done.

 

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: is there a place that sells Microsoft office home and business at a discounted price?

Van Lant, Robin
 

Glad to know of Bonanza.  I bought my copy of Office 2016 on eBay. 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim Rawls
Sent: Tuesday, April 13, 2021 7:31 PM
To: main@jfw.groups.io
Subject: Re: is there a place that sells Microsoft office home and business at a discounted price?

 

WARNING: This email originated externally. Exercise caution. Think before clicking links or opening attachments.

 

Thanks. Jim

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tim Ford
Sent: Tuesday, April 13, 2021 5:06 PM
To: main@jfw.groups.io
Subject: Re: is there a place that sells Microsoft office home and business at a discounted price?

 

Bonanza.com is the place to go.  It is reliable and like Amazon, will intervene with its sellers if there is any delay.  I bought Office 2013 Pro for $35 just last month.  It has the lowest prices I see anywhere on used software.

 

Tim

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of HH. Smith Jr.
Sent: Tuesday, April 13, 2021 5:02 PM
To: main@jfw.groups.io
Subject: Re: is there a place that sells Microsoft office home and business at a discounted price?

 

Hi,

 

Ebay, it is the only place I know  of at this moment.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim Rawls
Sent: Tuesday, April 13, 2021 4:12 PM
To: main@jfw.groups.io
Subject: is there a place that sells Microsoft office home and business at a discounted price?

 

Hi all, I am running jaws 18 on a windows ten computer. Jim

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: Jaws and links within emails

Steve Nutt
 

No, this is where JAWS doesn't focus on the link correctly.

If you shift tab, then tab back to the link then press enter, it would work.

All the best

Steve

--
To subscribe to our News and Special Offers list, go to
https://www.comproom.co.uk/subscribe

Computer Room Services
77 Exeter Close
Stevenage
Hertfordshire
SG1 4PW
T: +44(0)1438-742286
M: +44(0)7956-334938
F: +44(0)1438-759589
E: steve@comproom.co.uk
W: https://www.comproom.co.uk

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of CJ &AA MAY
Sent: 06 April 2021 18:48
To: main@jfw.groups.io
Subject: Re: Jaws and links within emails

Funny you mention this, as I had this exact problem with a recent e-mail. A
friend sent me several Dropbox links, all of which I could open either by
press enter on the link or using the context menu to open the link. But
there was just one in the whole list which, when I hit enter on the link,
took me to the subject line and when I tried again, looking in the context
menu, I couldn't actually find the option to open the link. As this was just
one of about a dozen links, I assumed the sender hadn't entered the details
properly.
Alison


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: 06 April 2021 17:13
To: main@jfw.groups.io
Subject: Re: Jaws and links within emails

I tried that, but got the same result.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: April 6, 2021 10:52 AM
To: main@jfw.groups.io
Subject: Re: Jaws and links within emails

Have yu hit the tab key in the message to get to the link?



Richard

Ralph's Observation: It is a mistake to allow any mechanical object<>to
realize that you are in a hurry.


My web site, www.turner42.com



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, April 6, 2021 8:47 AM
To: main@jfw.groups.io
Subject: Jaws and links within emails

Hi all,
I've had an issue on and off that when I click on a link within an email I'm
taken to the subject of the email and not the webpage that the link is for.
This is extremely annoying especially when it happens with verification
emails, is there anything I can do to prevent this from happening in the
future? I've tried changing the format that email messages are displayed in,
but this hasn't made any difference, I know someone told me that when I'm on
a link I can bring up the context menu and get something that says open
hyperlink or something, but I've tried this and have not yet found such an
option. I'm running the latest versions of Jaws, Edge, Office 365 and
Windows 10. Look forward to any help anyone can provide me, everyone's help
is always much appreciated!!!! Thanks Madison


moderated Re: create a system image.

Randy Barnett <blindmansbluff09@...>
 

Then this sounds like the best solution for blind people. unless you want automatic incremental backups that is.

On 4/13/2021 7:59 PM, Glenn / Lenny wrote:

If you can run Win PE, just use 7Zip for the image.
The system I am using now was zipped and unzipped onto a new drive with 7Zip and Win PE.
Note, you don't need to zip up pagefile.sys and hyberfil.sys in the root of C:, as windows makes those fresh when they are not there, they are just temp files, and each one equals the amount of RAM your computer uses.
Glenn
----- Original Message -----
Sent: Tuesday, April 13, 2021 9:54 PM
Subject: Re: create a system image.

Will it run within Win PE?

On 4/13/2021 5:04 PM, Brian Vogel wrote:
On Tue, Apr 13, 2021 at 07:58 PM, Alan Lemly wrote:
I did need a bit of sighted help to restore
-
Which is true of the vast majority of backup/restore software because the restore process takes place without Windows itself actually being running, meaning there is no screen reader support.  

Most of my sighted clients have no idea how to do a restore even if they wanted to, but several have been very, very thankful indeed that they had a backup that they'd taken on a regular cycle when they had storage failure (whether HDD or SSD) but had to have me do the actual restore.  It sure as heck beats losing all the data one acquires over years on most computer systems!
 --

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

There are many who labor under the gross misapprehension that the Constitution is a cage and a laundry-list rather than a framework upon which great things have been and still will be built. Many things that are entirely Constitutional are not "in the Constitution," but are allowed under it.

            ~Brian Vogel


moderated Re: create a system image.

Glenn / Lenny
 


If you can run Win PE, just use 7Zip for the image.
The system I am using now was zipped and unzipped onto a new drive with 7Zip and Win PE.
Note, you don't need to zip up pagefile.sys and hyberfil.sys in the root of C:, as windows makes those fresh when they are not there, they are just temp files, and each one equals the amount of RAM your computer uses.
Glenn

----- Original Message -----
Sent: Tuesday, April 13, 2021 9:54 PM
Subject: Re: create a system image.

Will it run within Win PE?

On 4/13/2021 5:04 PM, Brian Vogel wrote:
On Tue, Apr 13, 2021 at 07:58 PM, Alan Lemly wrote:
I did need a bit of sighted help to restore
-
Which is true of the vast majority of backup/restore software because the restore process takes place without Windows itself actually being running, meaning there is no screen reader support.  

Most of my sighted clients have no idea how to do a restore even if they wanted to, but several have been very, very thankful indeed that they had a backup that they'd taken on a regular cycle when they had storage failure (whether HDD or SSD) but had to have me do the actual restore.  It sure as heck beats losing all the data one acquires over years on most computer systems!
 --

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

There are many who labor under the gross misapprehension that the Constitution is a cage and a laundry-list rather than a framework upon which great things have been and still will be built. Many things that are entirely Constitutional are not "in the Constitution," but are allowed under it.

            ~Brian Vogel


moderated Re: create a system image.

Randy Barnett <blindmansbluff09@...>
 

Will it run within Win PE?

On 4/13/2021 5:04 PM, Brian Vogel wrote:
On Tue, Apr 13, 2021 at 07:58 PM, Alan Lemly wrote:
I did need a bit of sighted help to restore
-
Which is true of the vast majority of backup/restore software because the restore process takes place without Windows itself actually being running, meaning there is no screen reader support.  

Most of my sighted clients have no idea how to do a restore even if they wanted to, but several have been very, very thankful indeed that they had a backup that they'd taken on a regular cycle when they had storage failure (whether HDD or SSD) but had to have me do the actual restore.  It sure as heck beats losing all the data one acquires over years on most computer systems!
 --

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

There are many who labor under the gross misapprehension that the Constitution is a cage and a laundry-list rather than a framework upon which great things have been and still will be built. Many things that are entirely Constitutional are not "in the Constitution," but are allowed under it.

            ~Brian Vogel


moderated Re: email clients

James Bentley
 

I thought that I had already thanked you and several other listers for this information.  But, I have slept since then.

 

It is working perfectly for me now.

 

I really appreciate all of you for this.

 

It seems like this past few days have been my turn to learn some important things about Outlook and my iPhone.

 

James B 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Tuesday, April 13, 2021 10:31 AM
To: main@jfw.groups.io
Subject: Re: email clients

 

Just press Control + E from your main Inbox, for me this searches all the folders I have.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Bentley
Sent: Sunday, April 11, 2021 7:09 PM
To: main@jfw.groups.io
Subject: Re: email clients

 

Hi,

 

What if I do not know where the word or phrase is located?

 

In other words, how do I get outlook to check all places for my phrase or word?

 

Thank you,

 

James B 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Debby Hill
Sent: Sunday, April 11, 2021 8:28 AM
To: main@jfw.groups.io
Subject: Re: email clients

 

Hi James,

 

If you are using MS365, then I am assuming the email client is Outlook. To do a find press Control + Shift + F. You will land in a field in which you can type a search term. If that is what you are searching for type the term. Then tab and you will be in a combo box where you can choose the search term to be either located in just the subject or in

both the subject and body of the emails.

 

If you are looking for email that was sent from or sent to someone, tab passed these fields and you will find fields in which to enter either the from or to names.

 

After you have entered the search terms you want press enter. When the search is complete you will get the  message “find now.” Once you get that message press F6 and you will be in the list of messages it found.

 

I hope that helps!

 

Take care and stay safe!

 

Debby

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Bentley
Sent: Saturday, April 10, 2021 11:40 PM
To: main@jfw.groups.io
Subject: Re: email clients

 

Hi Brian and list,

 

First, let me apologize for being so far behind on reading emails.

 

Back when I was using Windows Live Mail.  I could search for a particular word in any folder or subfolder by going through the menus/ribbons without any problems.

 

Now, after using MS365 for around 15 months now, I still can’t figure out how to use the search feature.

 

I could come up with around 5 or 6 additional problems that I have with MS365 but I don’t want to give myself a headache thinking about them.

 

I use MS365 because  it is better for me than any thing else that I have tried.  Including Windows mail and Thunderbird and the web mail that Gmail and A T and T offer.

 

So, I’m not saying that it isn’t the best thing going, but, at least for me, I still can’t do some very basic things like search folders for a certain word or phrase. 

 

For example, the hot key like Control, Shift, A goes in to advanced search.  That works fine for me.  But following the prompts/understanding the menus from that point to find what Iam looking for just isn’t working for me.  I’ve run in to dead ends with other things that were very easy with WLM.

 

Regards,

 

James B 

 

From : main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Vogel
Sent: Friday, April 9, 2021 5:39 PM
To: main@jfw.groups.io
Subject: Re: email clients

 

James & Alan,

          I'm curious to hear some specific examples from you.  I absolutely will not deny the seemingly endless stream of new bells and whistles from Microsoft and others, but with the sole exception of the introduction of the ribbon interface (and even then, only for a subset of commands), I haven't encountered many keyboard shortcuts change at all.  The "old standards" have been the same quite literally for as long as I can remember, and the Windows commands that form the core of many programs (e.g., Save, Save As, the navigation dialog for both, Open, etc.) have been, too.

           There is very seldom, in my experience, any shakeup in existing shortcuts secondary to new additions to the UI, whatever those additions may be.  Note well I said seldom, not absolutely never.
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

There are many who labor under the gross misapprehension that the Constitution is a cage and a laundry-list rather than a framework upon which great things have been and still will be built. Many things that are entirely Constitutional are not "in the Constitution," but are allowed under it.

            ~Brian Vogel


moderated Re: is there a place that sells Microsoft office home and business at a discounted price?

Jim Rawls
 

Thanks. Jim

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tim Ford
Sent: Tuesday, April 13, 2021 5:06 PM
To: main@jfw.groups.io
Subject: Re: is there a place that sells Microsoft office home and business at a discounted price?

 

Bonanza.com is the place to go.  It is reliable and like Amazon, will intervene with its sellers if there is any delay.  I bought Office 2013 Pro for $35 just last month.  It has the lowest prices I see anywhere on used software.

 

Tim

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of HH. Smith Jr.
Sent: Tuesday, April 13, 2021 5:02 PM
To: main@jfw.groups.io
Subject: Re: is there a place that sells Microsoft office home and business at a discounted price?

 

Hi,

 

Ebay, it is the only place I know  of at this moment.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim Rawls
Sent: Tuesday, April 13, 2021 4:12 PM
To: main@jfw.groups.io
Subject: is there a place that sells Microsoft office home and business at a discounted price?

 

Hi all, I am running jaws 18 on a windows ten computer. Jim


moderated Re: is there a place that sells Microsoft office home and business at a discounted price?

Tim Ford
 

Bonanza.com is the place to go.  It is reliable and like Amazon, will intervene with its sellers if there is any delay.  I bought Office 2013 Pro for $35 just last month.  It has the lowest prices I see anywhere on used software.

 

Tim

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of HH. Smith Jr.
Sent: Tuesday, April 13, 2021 5:02 PM
To: main@jfw.groups.io
Subject: Re: is there a place that sells Microsoft office home and business at a discounted price?

 

Hi,

 

Ebay, it is the only place I know  of at this moment.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim Rawls
Sent: Tuesday, April 13, 2021 4:12 PM
To: main@jfw.groups.io
Subject: is there a place that sells Microsoft office home and business at a discounted price?

 

Hi all, I am running jaws 18 on a windows ten computer. Jim


moderated Re: create a system image.

 

On Tue, Apr 13, 2021 at 07:58 PM, Alan Lemly wrote:
I did need a bit of sighted help to restore
-
Which is true of the vast majority of backup/restore software because the restore process takes place without Windows itself actually being running, meaning there is no screen reader support.  

Most of my sighted clients have no idea how to do a restore even if they wanted to, but several have been very, very thankful indeed that they had a backup that they'd taken on a regular cycle when they had storage failure (whether HDD or SSD) but had to have me do the actual restore.  It sure as heck beats losing all the data one acquires over years on most computer systems!
 --

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

There are many who labor under the gross misapprehension that the Constitution is a cage and a laundry-list rather than a framework upon which great things have been and still will be built. Many things that are entirely Constitutional are not "in the Constitution," but are allowed under it.

            ~Brian Vogel


moderated Re: is there a place that sells Microsoft office home and business at a discounted price?

HH. Smith Jr.
 

Hi,

 

Ebay, it is the only place I know  of at this moment.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim Rawls
Sent: Tuesday, April 13, 2021 4:12 PM
To: main@jfw.groups.io
Subject: is there a place that sells Microsoft office home and business at a discounted price?

 

Hi all, I am running jaws 18 on a windows ten computer. Jim


moderated Re: create a system image.

 

I’m with Brian. Macrium Reflect is a great program for making images of your entire system. I did need a bit of sighted help to restore one of those images but when the hard disk on my Windows 7 box died the other day, I was able to purchase a replacement from Amazon for about $50, restore the backed up image from my external USB drive and be back in business after a few hours. Here is the download link to Macrium Reflect for anyone who is interested:

 

https://www.filehorse.com/download-macrium-reflect-64/download/

 

Alan Lemly

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Vogel
Sent: Tuesday, April 13, 2021 8:30 AM
To: main@jfw.groups.io
Subject: Re: create a system image.

 

One option, and there are others:  Using Macrium Reflect Free with a Screen Reader
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

There are many who labor under the gross misapprehension that the Constitution is a cage and a laundry-list rather than a framework upon which great things have been and still will be built. Many things that are entirely Constitutional are not "in the Constitution," but are allowed under it.

            ~Brian Vogel


moderated is there a place that sells Microsoft office home and business at a discounted price?

Jim Rawls
 

Hi all, I am running jaws 18 on a windows ten computer. Jim


moderated Re: using a pc with a fingerprint/faceID reader?

Rayn Darren
 

I have the same problem Soronel, I've just stopped using it altogether.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Soronel Haetir
Sent: Sunday, April 4, 2021 8:41 AM
To: main@jfw.groups.io
Subject: Re: using a pc with a fingerprint/faceID reader?

My problem with the fingerprint scanner has nothing to do with setting it up (that part went fine), it's just that whether it works for actual login is very hit-or-miss and it doesn't seem to matter how often I clean the thing or how carefully I position my finger.

On 4/4/21, Jessica D <jldail13@outlook.com> wrote:
Hi,

I’m not sure. It just didn’t say anything at that particular stage, so
I got sighted help, & got it setup.
It works amazingly well.

Thanks,
Jessica
On Apr 4, 2021, at 2:46 AM, Phillip Gross <phillip_gross@outlook.com> wrote:

Okay, a couple of things. I had been using a Surface Book with Face
ID for a couple of years. I had some trouble with it depending on sun
glasses, angle of the screen, etc. I recently got a computer with a
fingerprint reader and I like it much better. Something that helps
with both of them is to go into settings after the computer is scanned
up and do another setup of your finger or your face while using a better screen reader than narrator.


To the original poster, what was the problem with narrator and the
fingerprint reader. I have set up windows multiple times with a
fingerprint reader and it will always say to lift my finger and to place it back down.
Then it will tell me to move my finger around while lifting it and
placing it.







--
Soronel Haetir
soronel.haetir@gmail.com


moderated Re: email clients

Thomas N. Chan
 

You must have did this specific search previously
Else, it will only search current view or mailbox.

Regards,
Thomas N. Chan


On Wed, 14 Apr 2021 at 01:01, Cristóbal <cristobalmuli@...> wrote:

Same here. This is with my Exchange business accounts, but I’m pretty sure it also applies with imap, but I haven’t had to conduct a search in my personal email in a while so…

 

Cristóbal

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Tuesday, April 13, 2021 9:30 AM
To: main@jfw.groups.io
Subject: Re: email clients

 

For my business account I have about 10 main subfolders and in some cases these again have subfolders with subfolders and if I search from the main Inbox with Control + E it searches all of them.

I have, for example, a folder called "Suppliers" and that folder has at least 200 or 300 sub folders and some of these have again their own sub folders and it will search them all.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Thomas N. Chan
Sent: Tuesday, April 13, 2021 9:00 AM
To: main@jfw.groups.io
Subject: Re: email clients

 

By default, its only searching on the current mailbox, it will not search for sub folder or other. Unless your focus is else where.


Regards,
Thomas N. Chan

 

 

On Tue, 13 Apr 2021 at 23:30, Sieghard Weitzel <sieghard@...> wrote:

Just press Control + E from your main Inbox, for me this searches all the folders I have.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Bentley
Sent: Sunday, April 11, 2021 7:09 PM
To: main@jfw.groups.io
Subject: Re: email clients

 

Hi,

 

What if I do not know where the word or phrase is located?

 

In other words, how do I get outlook to check all places for my phrase or word?

 

Thank you,

 

James B 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Debby Hill
Sent: Sunday, April 11, 2021 8:28 AM
To: main@jfw.groups.io
Subject: Re: email clients

 

Hi James,

 

If you are using MS365, then I am assuming the email client is Outlook. To do a find press Control + Shift + F. You will land in a field in which you can type a search term. If that is what you are searching for type the term. Then tab and you will be in a combo box where you can choose the search term to be either located in just the subject or in

both the subject and body of the emails.

 

If you are looking for email that was sent from or sent to someone, tab passed these fields and you will find fields in which to enter either the from or to names.

 

After you have entered the search terms you want press enter. When the search is complete you will get the  message “find now.” Once you get that message press F6 and you will be in the list of messages it found.

 

I hope that helps!

 

Take care and stay safe!

 

Debby

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Bentley
Sent: Saturday, April 10, 2021 11:40 PM
To: main@jfw.groups.io
Subject: Re: email clients

 

Hi Brian and list,

 

First, let me apologize for being so far behind on reading emails.

 

Back when I was using Windows Live Mail.  I could search for a particular word in any folder or subfolder by going through the menus/ribbons without any problems.

 

Now, after using MS365 for around 15 months now, I still can’t figure out how to use the search feature.

 

I could come up with around 5 or 6 additional problems that I have with MS365 but I don’t want to give myself a headache thinking about them.

 

I use MS365 because  it is better for me than any thing else that I have tried.  Including Windows mail and Thunderbird and the web mail that Gmail and A T and T offer.

 

So, I’m not saying that it isn’t the best thing going, but, at least for me, I still can’t do some very basic things like search folders for a certain word or phrase. 

 

For example, the hot key like Control, Shift, A goes in to advanced search.  That works fine for me.  But following the prompts/understanding the menus from that point to find what Iam looking for just isn’t working for me.  I’ve run in to dead ends with other things that were very easy with WLM.

 

Regards,

 

James B 

 

From : main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Vogel
Sent: Friday, April 9, 2021 5:39 PM
To: main@jfw.groups.io
Subject: Re: email clients

 

James & Alan,

          I'm curious to hear some specific examples from you.  I absolutely will not deny the seemingly endless stream of new bells and whistles from Microsoft and others, but with the sole exception of the introduction of the ribbon interface (and even then, only for a subset of commands), I haven't encountered many keyboard shortcuts change at all.  The "old standards" have been the same quite literally for as long as I can remember, and the Windows commands that form the core of many programs (e.g., Save, Save As, the navigation dialog for both, Open, etc.) have been, too.

           There is very seldom, in my experience, any shakeup in existing shortcuts secondary to new additions to the UI, whatever those additions may be.  Note well I said seldom, not absolutely never.
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

There are many who labor under the gross misapprehension that the Constitution is a cage and a laundry-list rather than a framework upon which great things have been and still will be built. Many things that are entirely Constitutional are not "in the Constitution," but are allowed under it.

            ~Brian Vogel


moderated Re: New computer fun

Jaffar Sidek
 

Forgot about the playlist files, sorry! 

On 14/4/2021 12:33 am, JM Casey wrote:

Hey.

 

Yes, the problem is that the winamp playlist file is a text file that points to the paths where the files used to be. It’s not the same anymore, since the drives have switched.

I’m not sure there is really an easy way to change this that doesn’t involve going in there with a text editor.

You might be better off just recreating the playlists, honestly. But if this is an intolerable task, you could try find and replace in Word or some similar programme, maybe. Problem is that, since winamp and the files you want to play were previously on the same drive, it probably wont’ even show the drive letter on the playlist. Go open the m3u file in notepad and you’ll see what I mean.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: April 12, 2021 10:00 PM
To: jfw@groups.io
Subject: New computer fun

 

Hello everyone.  I have made the change from Windows 7 to a brand new Windows 10 machine with lots of bells and  whisels.  I have transferred all of my files to the D drive, which before, they were in the C drive.  Now for the fun part.  How do I get my playlists to play in Winamp?  I am running the most recent JAWS update.  The music files and the play list .M3U files are together in the same folder thatt they were on my old computer.  The Winamp program, however is on the C drive.  Is this my problem?

I have lots of other questions like how to get my contacts into Outlook 2016 or Windows Mail, but that is another thread.  Thanks in advanced for any hents.

Love in Christ

Marty

The Gospel is freely accessible to all.


moderated Re: email clients

Cristóbal
 

Same here. This is with my Exchange business accounts, but I’m pretty sure it also applies with imap, but I haven’t had to conduct a search in my personal email in a while so…

 

Cristóbal

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Tuesday, April 13, 2021 9:30 AM
To: main@jfw.groups.io
Subject: Re: email clients

 

For my business account I have about 10 main subfolders and in some cases these again have subfolders with subfolders and if I search from the main Inbox with Control + E it searches all of them.

I have, for example, a folder called "Suppliers" and that folder has at least 200 or 300 sub folders and some of these have again their own sub folders and it will search them all.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Thomas N. Chan
Sent: Tuesday, April 13, 2021 9:00 AM
To: main@jfw.groups.io
Subject: Re: email clients

 

By default, its only searching on the current mailbox, it will not search for sub folder or other. Unless your focus is else where.


Regards,
Thomas N. Chan

 

 

On Tue, 13 Apr 2021 at 23:30, Sieghard Weitzel <sieghard@...> wrote:

Just press Control + E from your main Inbox, for me this searches all the folders I have.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Bentley
Sent: Sunday, April 11, 2021 7:09 PM
To: main@jfw.groups.io
Subject: Re: email clients

 

Hi,

 

What if I do not know where the word or phrase is located?

 

In other words, how do I get outlook to check all places for my phrase or word?

 

Thank you,

 

James B 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Debby Hill
Sent: Sunday, April 11, 2021 8:28 AM
To: main@jfw.groups.io
Subject: Re: email clients

 

Hi James,

 

If you are using MS365, then I am assuming the email client is Outlook. To do a find press Control + Shift + F. You will land in a field in which you can type a search term. If that is what you are searching for type the term. Then tab and you will be in a combo box where you can choose the search term to be either located in just the subject or in

both the subject and body of the emails.

 

If you are looking for email that was sent from or sent to someone, tab passed these fields and you will find fields in which to enter either the from or to names.

 

After you have entered the search terms you want press enter. When the search is complete you will get the  message “find now.” Once you get that message press F6 and you will be in the list of messages it found.

 

I hope that helps!

 

Take care and stay safe!

 

Debby

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Bentley
Sent: Saturday, April 10, 2021 11:40 PM
To: main@jfw.groups.io
Subject: Re: email clients

 

Hi Brian and list,

 

First, let me apologize for being so far behind on reading emails.

 

Back when I was using Windows Live Mail.  I could search for a particular word in any folder or subfolder by going through the menus/ribbons without any problems.

 

Now, after using MS365 for around 15 months now, I still can’t figure out how to use the search feature.

 

I could come up with around 5 or 6 additional problems that I have with MS365 but I don’t want to give myself a headache thinking about them.

 

I use MS365 because  it is better for me than any thing else that I have tried.  Including Windows mail and Thunderbird and the web mail that Gmail and A T and T offer.

 

So, I’m not saying that it isn’t the best thing going, but, at least for me, I still can’t do some very basic things like search folders for a certain word or phrase. 

 

For example, the hot key like Control, Shift, A goes in to advanced search.  That works fine for me.  But following the prompts/understanding the menus from that point to find what Iam looking for just isn’t working for me.  I’ve run in to dead ends with other things that were very easy with WLM.

 

Regards,

 

James B 

 

From : main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Vogel
Sent: Friday, April 9, 2021 5:39 PM
To: main@jfw.groups.io
Subject: Re: email clients

 

James & Alan,

          I'm curious to hear some specific examples from you.  I absolutely will not deny the seemingly endless stream of new bells and whistles from Microsoft and others, but with the sole exception of the introduction of the ribbon interface (and even then, only for a subset of commands), I haven't encountered many keyboard shortcuts change at all.  The "old standards" have been the same quite literally for as long as I can remember, and the Windows commands that form the core of many programs (e.g., Save, Save As, the navigation dialog for both, Open, etc.) have been, too.

           There is very seldom, in my experience, any shakeup in existing shortcuts secondary to new additions to the UI, whatever those additions may be.  Note well I said seldom, not absolutely never.
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

There are many who labor under the gross misapprehension that the Constitution is a cage and a laundry-list rather than a framework upon which great things have been and still will be built. Many things that are entirely Constitutional are not "in the Constitution," but are allowed under it.

            ~Brian Vogel

3881 - 3900 of 92126