Date   

Re: A weird Google Chrome problem

 

Hello Edhoari,

 

I don’t usually use this website, but when the original poster asked I tried it with Chrome and Jaws 2018 and had no issues navigating the site, opening links and so on.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Edhoari Setiyoso
Sent: Monday, January 15, 2018 8:22 PM
To: main@jfw.groups.io
Subject: Re: A weird Google Chrome problem

 

Hi,

Tried accesssing mosquito.org with several combination and found one that works.

Chrome + JAWS = Not working
Chrome + NVDA = Not working
Firefox + JAWS = Not working
Firefox + NVDA = Works

I use Firefox 56. For now just stay away from Firefox Quantum.

Hope that helps.

Edhoari Setiyoso
edhoari <dot> s [at] gmail <dot> com

On 15-Jan-18 9:01 PM, Delaunay Christophe wrote:

Hi all,

 

Since I was getting more and more frustrated with Firefox, especially when it was upgraded to 57, I decided to replace it with Google Chrome.

 

With my new Jaws 2018, it is working fairly well except on this site:

 

https://mosquitto.org/

 

This site describes a light open-source piece of software dedicated to message exchanges among small objects.

 

Problem: When I click this link to open it, Jaws begins to read it ok but as soon as I click a link within this page, (for instance the “documentation” link), Jaws gets stuck forever on the new page title.

 

Did anyone else notice such an annoying behavior please? Is there a way to fix it?

 

BTW, I am using Chrome 64-bit version 63.0.3239.132 on a Windows 7 64-bit Entreprise Edition computer.

 

Many thanks in advance for any advice. Have a nice day. Chris D

 


Re: JAWS18 and JAWS2018

Dave...
 

Major difference is that if you have a Pearl camera, or other scanning
device attached, you can invoke OCR on a printed page directly from the JAWS
Convenient OCR feature, rather than running Openbook or other OCR software.
No improvements to sluggishness or freezing when using JAWS commands,
however.

Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "Robbie Curtis" <essence64@triad.rr.com>
To: <main@jfw.groups.io>
Sent: Tuesday, January 16, 2018 10:37
Subject: JAWS18 and JAWS2018


Good Afternoon,

I am getting ready to update my JAWS version and would like to know what
is the difference between JAWS18 and 2018? Thanks.

--
Robbie J. Curtis
essence64@triad.rr.com
"Stay in peace, not pieces!"


JAWS18 and JAWS2018

Robbie Curtis
 

Good Afternoon,

I am getting ready to update my JAWS version and would like to know what is the difference between JAWS18 and 2018? Thanks.

--
Robbie J. Curtis
essence64@triad.rr.com
"Stay in peace, not pieces!"


Re: Home Security

Dave...
 

...better off considering one to use with an iPhone, since those seem to be more prevalent. And more useful since you can monitor or respond when you're away from home and your computer.
 
Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer
 
 

----- Original Message -----
From: Jonas Voll
Sent: Tuesday, January 16, 2018 09:01
Subject: Home Security

Any one know about Home Security that will work with Jaws?

 

 

Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
www.envisionus.com

Envision: To improve the quality of life and provide inspiration and opportunity for people who are blind or visually impaired through employment, outreach, rehabilitation, education and research.


NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.



Re: JAWS and Ubuntu bash

Edhoari Setiyoso
 

Hi All,

Thanks. It works :)


Regards

Edhoari Setiyoso
edhoari <dot> s [at] gmail <dot> com

On 16-Jan-18 12:50 AM, Jason White via Groups.Io wrote:
You can also choose from among several other Linux distributions (with more said to be forthcoming) if Ubuntu isn't what you prefer.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of GV-Knope, John (Greenville)
Sent: Monday, January 15, 2018 11:23 AM
To: main@jfw.groups.io
Subject: Re: JAWS and Ubuntu bash

Hi Scott,

The Linux subsystem for Windows is a welcome addition to Windows 10. I prefer the command line environment over the point and click graphical user interface.

To review the screen, use either the JAWS cursor or invisible cursor. The JAWS cursor can be activated by pressing NumPad -. The invisible cursor can be activated by pressing NumPad - twice quickly. You can determine which cursor is active by pressing ALT+NumPad delete.
I hope this helps.
John F Knope
Student, CIS – Cloud Computing
ECPI University
Home
508 Mapleton Drive
Greenville, SC 29607
Phone:
864.438.1947
Email: johkno3041@students.ecpi.edu

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Scott Wheat
Sent: Monday, January 15, 2018 10:02 AM
To: main@jfw.groups.io
Subject: Re: JAWS and Ubuntu bash

If I understand what you are asking, all you have to do is use the JAWS cursor. Rout JAWS to PC with insert-numpad-pluss and then use the numpad up-arrow to read the results.

Scott


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Edhoari Setiyoso
Sent: Monday, January 15, 2018 12:18 AM
To: main@jfw.groups.io
Subject: JAWS and Ubuntu bash

Hi Group,

I'm new with JAWS and need some advice. Anyone here using ubuntu bash on Windows 10? or Command Prompt I'm having problems after execute a command, I need to review it's output. Using NVDA or Gnome Orca (Linux), we use numpad key to review command result. I think there has to be a way for JAWS to do it. just don't know how.

I hope someone can help me with this. Any help would be appreciated.

Best Regards

--
Edhoari Setiyoso
edhoari <dot> s [at] gmail <dot> com














Re: A weird Google Chrome problem

Edhoari Setiyoso
 

Hi,

Tried accesssing mosquito.org with several combination and found one that works.

Chrome + JAWS = Not working
Chrome + NVDA = Not working
Firefox + JAWS = Not working
Firefox + NVDA = Works

I use Firefox 56. For now just stay away from Firefox Quantum.

Hope that helps.

Edhoari Setiyoso
edhoari <dot> s [at] gmail <dot> com
On 15-Jan-18 9:01 PM, Delaunay Christophe wrote:

Hi all,

 

Since I was getting more and more frustrated with Firefox, especially when it was upgraded to 57, I decided to replace it with Google Chrome.

 

With my new Jaws 2018, it is working fairly well except on this site:

 

https://mosquitto.org/

 

This site describes a light open-source piece of software dedicated to message exchanges among small objects.

 

Problem: When I click this link to open it, Jaws begins to read it ok but as soon as I click a link within this page, (for instance the “documentation” link), Jaws gets stuck forever on the new page title.

 

Did anyone else notice such an annoying behavior please? Is there a way to fix it?

 

BTW, I am using Chrome 64-bit version 63.0.3239.132 on a Windows 7 64-bit Entreprise Edition computer.

 

Many thanks in advance for any advice. Have a nice day. Chris D



Home Security

Jonas Voll
 

Any one know about Home Security that will work with Jaws?

 

 

Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
www.envisionus.com

Envision: To improve the quality of life and provide inspiration and opportunity for people who are blind or visually impaired through employment, outreach, rehabilitation, education and research.


NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.



Re: Issues installing JAWS 16 pro on Windows 10

Jonas Voll
 

Got any remote software installed on that system?

Or do you see an video driver installed?

 

 

Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
www.envisionus.com

Envision: To improve the quality of life and provide inspiration and opportunity for people who are blind or visually impaired through employment, outreach, rehabilitation, education and research.


From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of gillianbramley80@...
Sent: Monday, January 15, 2018 9:50 AM
To: main@jfw.groups.io
Subject: Issues installing JAWS 16 pro on Windows 10

 

HI all

My work is currently going through an update of all it's hard and software, basically we are transferring over to windows 10 from windows 7 and having new laptops.

 

The reason for me contacting is that I and IT are having a few problems installing the JAWS on to the new laptop, each time we do an install for JAWS 16 pro an error message pops up to  say “ The Freedom Scientific Mirror display driver is not properly installed” and we cannot proceed any further.

 

I am not sure if this is an issue with the software (JAWS) not being able to work with windows 10, or that the build of the laptop is not compatible with JAWS. We also got the same error message when we tried to download a copy of JAWS 18. 

 

Any help would be really appreciated. 

Many Thanks 

Gillybean80

 
SonicWall identified this message as clean.
To manage your junk mail go to https://nospam.envisionus.com 
and 
logon with your domain userid and password.
If you consider this email to be spam please forward it to 
'spam@...'

NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.



Re: A weird Google Chrome problem

Steve Nutt
 

Hi,

 

The single best way to fix issues like this is to join the Chrome Access list.  You can join by sending a blank message to:-

 

axs-chrome-discuss+subscribe@...

 

Then when you are joined, the posting address is:-

 

axs-chrome-discuss@...

 

Google are fantastic at listening to and fixing accessibility concerns with Chrome and all screen readers.

 

All the best


Steve

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Jason White via Groups.Io
Sent: 15 January 2018 14:50
To: main@jfw.groups.io
Subject: Re: A weird Google Chrome problem

 

I can reproduce it by following the link you gave. I suggest reporting it to VFO. If it’s a JAWS issue, they can fix it. If it’s a Google Chrome issue, Google can fix it (and they recently – within the last year or so – employed another top accessibility engineer to work on Chrome, in addition to the excellent expertise they already had).

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Delaunay Christophe
Sent: Monday, January 15, 2018 9:02 AM
To: main@jfw.groups.io
Subject: A weird Google Chrome problem

 

Hi all,

 

Since I was getting more and more frustrated with Firefox, especially when it was upgraded to 57, I decided to replace it with Google Chrome.

 

With my new Jaws 2018, it is working fairly well except on this site:

 

https://mosquitto.org/

 

This site describes a light open-source piece of software dedicated to message exchanges among small objects.

 

Problem: When I click this link to open it, Jaws begins to read it ok but as soon as I click a link within this page, (for instance the “documentation” link), Jaws gets stuck forever on the new page title.

 

Did anyone else notice such an annoying behavior please? Is there a way to fix it?

 

BTW, I am using Chrome 64-bit version 63.0.3239.132 on a Windows 7 64-bit Entreprise Edition computer.

 

Many thanks in advance for any advice. Have a nice day. Chris D


Re: subtracting numbers in Excel 2016 (office 365)

Dale Alton <blinkydale@...>
 

Or just skip the sum
=f10-a3-a5-k6
Or whatever order you want.
Dale

Denver Dale

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ann Byrne
Sent: Monday, January 15, 2018 2:55 PM
To: main@jfw.groups.io
Subject: Re: subtracting numbers in Excel 2016 (office 365)

If you want to string a bunch of subtracts together, use the sum
function: =sum(f10-a3-a5-k6).).
At 12:07 PM 1/15/2018, you wrote:
Hi,
I'm doing something where I need to subtract several numbers.

Can anyone tell me how to get Excel 2016 to do this?

Thanks,
Jessica


Re: beeps?

Carol Smith
 


On 1/15/2018 6:51 PM, Mike B. wrote:
Hi Carol,
 
Is the Sticky Keys feature turned on by any chance?  Also, does it do it when using eloquence?
Take care.  Mike.  Sent from my iBarstool.
Arguing with a woman is like reading a software license agreement.  In the end you have to ignore everything, & click I agree.
----- Original Message -----
Sent: Monday, January 15, 2018 2:58 PM
Subject: Re: beeps?

No, grin, there is not a stuck key.  I am back to Window-Eyes right now
and it is working fine.  I get the little harpy sound at the end of a
line, but that is all.Mike,

Sticky keys are off.  Eloquence is happily beeping along with the others,

Carol



I just switched back to Jaws and everything seems to be back to normal. 
I am going to switch back to David and see what happens. All seems to be
back to normal.  I have no idea what has been going on. I went back to
Goldwave and the beeps have started up again, but this time, they
stopped when I switched back to my email.  Or, at least, there were only
a few beeps.  They are irratic, but they are still there.  It sounds as
though there is a conflict with Goldwave and the better voices.  I guess
I will need to switch back and forth with screen readers depending on
what program I want to use.  It's a good thing I have more than one, grin.

Carol

Oh yes, the beeps are back pretty definitely in my email program.

Carol



On 1/15/2018 5:35 PM, Dave... wrote:
> Perhaps you have a stuck key on your keyboard?
>
> Dave
> Oregonian, woodworker, Engineer, Musician, and Pioneer
>
>
> ----- Original Message -----
> From: "Carol Smith via Groups.Io" <carollablady@...>
> To: <main@jfw.groups.io>
> Sent: Monday, January 15, 2018 14:20
> Subject: beeps?
>
>
> Hi,
>
> I am using Windows 10 current and Jaws 2018.  I am being bombarded with
> beeps.  If I don't do anything, they will eventually stop, but as soon
> as I do anything, yes, I mean anything, I get beeped. It is a fairly low
> pitched beep.  If I press one key and stop, I will get at least three or
> more beeps.  Any program opening or closing or any action within that
> program is very distracting. The beeps are as loud as the voice.  I am
> using Microsoft David. I have switched from David (64-bit) to Zyra
> (SAPI5) and the beeps have gone, but now, I get one of the Windows
> sounds that I typically get with every line change.  I am finding these
> sounds to be quite annoying and it is difficult to get anything done.
> The harpy sort fo sound comes every time I stop typing and sometimes
> while I am typing.  Can someone help?
>
> Thanks
>
> Carol
>
>
>
>
>
>
>
>
>
>





Re: beeps?

Mike B. <mb69mach1@...>
 


Hi Carol,
 
Is the Sticky Keys feature turned on by any chance?  Also, does it do it when using eloquence?
Take care.  Mike.  Sent from my iBarstool.
Arguing with a woman is like reading a software license agreement.  In the end you have to ignore everything, & click I agree.

----- Original Message -----
Sent: Monday, January 15, 2018 2:58 PM
Subject: Re: beeps?

No, grin, there is not a stuck key.  I am back to Window-Eyes right now
and it is working fine.  I get the little harpy sound at the end of a
line, but that is all.

I just switched back to Jaws and everything seems to be back to normal. 
I am going to switch back to David and see what happens. All seems to be
back to normal.  I have no idea what has been going on. I went back to
Goldwave and the beeps have started up again, but this time, they
stopped when I switched back to my email.  Or, at least, there were only
a few beeps.  They are irratic, but they are still there.  It sounds as
though there is a conflict with Goldwave and the better voices.  I guess
I will need to switch back and forth with screen readers depending on
what program I want to use.  It's a good thing I have more than one, grin.

Carol

Oh yes, the beeps are back pretty definitely in my email program.

Carol



On 1/15/2018 5:35 PM, Dave... wrote:
> Perhaps you have a stuck key on your keyboard?
>
> Dave
> Oregonian, woodworker, Engineer, Musician, and Pioneer
>
>
> ----- Original Message -----
> From: "Carol Smith via Groups.Io" <carollablady@...>
> To: <main@jfw.groups.io>
> Sent: Monday, January 15, 2018 14:20
> Subject: beeps?
>
>
> Hi,
>
> I am using Windows 10 current and Jaws 2018.  I am being bombarded with
> beeps.  If I don't do anything, they will eventually stop, but as soon
> as I do anything, yes, I mean anything, I get beeped. It is a fairly low
> pitched beep.  If I press one key and stop, I will get at least three or
> more beeps.  Any program opening or closing or any action within that
> program is very distracting. The beeps are as loud as the voice.  I am
> using Microsoft David. I have switched from David (64-bit) to Zyra
> (SAPI5) and the beeps have gone, but now, I get one of the Windows
> sounds that I typically get with every line change.  I am finding these
> sounds to be quite annoying and it is difficult to get anything done.
> The harpy sort fo sound comes every time I stop typing and sometimes
> while I am typing.  Can someone help?
>
> Thanks
>
> Carol
>
>
>
>
>
>
>
>
>
>




Re: beeps?

Carol Smith
 

No, grin, there is not a stuck key. I am back to Window-Eyes right now and it is working fine. I get the little harpy sound at the end of a line, but that is all.

I just switched back to Jaws and everything seems to be back to normal. I am going to switch back to David and see what happens. All seems to be back to normal. I have no idea what has been going on. I went back to Goldwave and the beeps have started up again, but this time, they stopped when I switched back to my email. Or, at least, there were only a few beeps. They are irratic, but they are still there. It sounds as though there is a conflict with Goldwave and the better voices. I guess I will need to switch back and forth with screen readers depending on what program I want to use. It's a good thing I have more than one, grin.

Carol

Oh yes, the beeps are back pretty definitely in my email program.

Carol

On 1/15/2018 5:35 PM, Dave... wrote:
Perhaps you have a stuck key on your keyboard?

Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer


----- Original Message -----
From: "Carol Smith via Groups.Io" <carollablady=aol.com@groups.io>
To: <main@jfw.groups.io>
Sent: Monday, January 15, 2018 14:20
Subject: beeps?


Hi,

I am using Windows 10 current and Jaws 2018. I am being bombarded with
beeps. If I don't do anything, they will eventually stop, but as soon
as I do anything, yes, I mean anything, I get beeped. It is a fairly low
pitched beep. If I press one key and stop, I will get at least three or
more beeps. Any program opening or closing or any action within that
program is very distracting. The beeps are as loud as the voice. I am
using Microsoft David. I have switched from David (64-bit) to Zyra
(SAPI5) and the beeps have gone, but now, I get one of the Windows
sounds that I typically get with every line change. I am finding these
sounds to be quite annoying and it is difficult to get anything done.
The harpy sort fo sound comes every time I stop typing and sometimes
while I am typing. Can someone help?

Thanks

Carol









Re: beeps?

Maria Campbell
 

You might try a different keyboard if you have one.


Maria Campbell
lucky1inct@gmail.com

"Preach the Gospel, and when necessary use words!"
--St. Francis

On 1/15/2018 5:32 PM, Maria Campbell wrote:
That is very weird.  I get that weird harpy beep but only when I hit a wrong key or something like that, and only once.


Maria Campbell
lucky1inct@gmail.com

"Preach the Gospel, and when necessary use words!"
--St. Francis

On 1/15/2018 5:20 PM, Carol Smith via Groups.Io wrote:
Hi,

I am using Windows 10 current and Jaws 2018.  I am being bombarded with beeps.  If I don't do anything, they will eventually stop, but as soon as I do anything, yes, I mean anything, I get beeped. It is a fairly low pitched beep.  If I press one key and stop, I will get at least three or more beeps.  Any program opening or closing or any action within that program is very distracting. The beeps are as loud as the voice.  I am using Microsoft David. I have switched from David (64-bit) to Zyra (SAPI5) and the beeps have gone, but now, I get one of the Windows sounds that I typically get with every line change.  I am finding these sounds to be quite annoying and it is difficult to get anything done. The harpy sort fo sound comes every time I stop typing and sometimes while I am typing.  Can someone help?

Thanks

Carol





Re: beeps?

Dave...
 

Perhaps you have a stuck key on your keyboard?

Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "Carol Smith via Groups.Io" <carollablady=aol.com@groups.io>
To: <main@jfw.groups.io>
Sent: Monday, January 15, 2018 14:20
Subject: beeps?


Hi,

I am using Windows 10 current and Jaws 2018. I am being bombarded with
beeps. If I don't do anything, they will eventually stop, but as soon
as I do anything, yes, I mean anything, I get beeped. It is a fairly low
pitched beep. If I press one key and stop, I will get at least three or
more beeps. Any program opening or closing or any action within that
program is very distracting. The beeps are as loud as the voice. I am
using Microsoft David. I have switched from David (64-bit) to Zyra
(SAPI5) and the beeps have gone, but now, I get one of the Windows
sounds that I typically get with every line change. I am finding these
sounds to be quite annoying and it is difficult to get anything done.
The harpy sort fo sound comes every time I stop typing and sometimes
while I am typing. Can someone help?

Thanks

Carol


Re: beeps?

Maria Campbell
 

That is very weird.  I get that weird harpy beep but only when I hit a wrong key or something like that, and only once.


Maria Campbell
lucky1inct@gmail.com

"Preach the Gospel, and when necessary use words!"
--St. Francis

On 1/15/2018 5:20 PM, Carol Smith via Groups.Io wrote:
Hi,

I am using Windows 10 current and Jaws 2018.  I am being bombarded with beeps.  If I don't do anything, they will eventually stop, but as soon as I do anything, yes, I mean anything, I get beeped. It is a fairly low pitched beep.  If I press one key and stop, I will get at least three or more beeps.  Any program opening or closing or any action within that program is very distracting. The beeps are as loud as the voice.  I am using Microsoft David. I have switched from David (64-bit) to Zyra (SAPI5) and the beeps have gone, but now, I get one of the Windows sounds that I typically get with every line change.  I am finding these sounds to be quite annoying and it is difficult to get anything done. The harpy sort fo sound comes every time I stop typing and sometimes while I am typing.  Can someone help?

Thanks

Carol





beeps?

Carol Smith
 

Hi,

I am using Windows 10 current and Jaws 2018. I am being bombarded with beeps. If I don't do anything, they will eventually stop, but as soon as I do anything, yes, I mean anything, I get beeped. It is a fairly low pitched beep. If I press one key and stop, I will get at least three or more beeps. Any program opening or closing or any action within that program is very distracting. The beeps are as loud as the voice. I am using Microsoft David. I have switched from David (64-bit) to Zyra (SAPI5) and the beeps have gone, but now, I get one of the Windows sounds that I typically get with every line change. I am finding these sounds to be quite annoying and it is difficult to get anything done. The harpy sort fo sound comes every time I stop typing and sometimes while I am typing. Can someone help?

Thanks

Carol


Re: subtracting numbers in Excel 2016 (office 365)

Ann Byrne
 

If you want to string a bunch of subtracts together, use the sum function: =sum(f10-a3-a5-k6).).

At 12:07 PM 1/15/2018, you wrote:
Hi,
I'm doing something where I need to subtract several numbers.

Can anyone tell me how to get Excel 2016 to do this?

Thanks,
Jessica


Re: JAWS and Oracle Products

Ekstrand, Pamela A. -ND
 

John,

I am a database administrator, but until recently, I have mostly been working with non-Oracle databases.

I am now starting to work more with oracle databases. I found the SQL Developer GUI interface only partially accessible with JAWS, so I have mostly been using the SQLPLUS command line interface to enter SQL commands.

I am using JAWS 18 on Windows 7.
________________________________________
From: main@jfw.groups.io [main@jfw.groups.io] on behalf of Richard B. McDonald [richardbmcdonald@gmail.com]
Sent: Sunday, January 14, 2018 4:51 PM
To: main@jfw.groups.io
Subject: Re: JAWS and Oracle Products

Hi John!

You ought to pose this question on the blind programmers list at the link below.

https://www.freelists.org/list/program-l

HTH,
Richard

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of GV-Knope, John (Greenville)
Sent: Sunday, January 14, 2018 9:26 AM
To: main@jfw.groups.io
Subject: JAWS and Oracle Products

I will be taking an introductory course in SQL next term. Oracle products have traditionally been use with screen readers, so I am reaching out for your thoughts about using JAWS with database applications.

I will provide further thoughts as this conversation develops, but for now I am not finding much help using search terms like accessibility, screen readers, Oracle, or SQL on the Internet.

Thanks for your thoughts.

John F Knope
Student, CIS – Cloud Computing
ECPI University
Home
508 Mapleton Drive
Greenville, SC 29607
Phone:
864.438.1947
Email: johkno3041@students.ecpi.edu<mailto:johkno3041@students.ecpi.edu>


Re: A weird Google Chrome problem

Randy Barnett <randy@...>
 

Hi, Chrome stalls on the homepage and wont continue. But it works fine with IE. IE still works for some pages that both FF and Chrome cant handle. Try downloading the FireFox ESR version it works fine. Also I use all 3 browsers since there will always be a page that one handles while the others dont.
On 1/15/2018 6:01 AM, Delaunay Christophe wrote:

Hi all,

 

Since I was getting more and more frustrated with Firefox, especially when it was upgraded to 57, I decided to replace it with Google Chrome.

 

With my new Jaws 2018, it is working fairly well except on this site:

 

https://mosquitto.org/

 

This site describes a light open-source piece of software dedicated to message exchanges among small objects.

 

Problem: When I click this link to open it, Jaws begins to read it ok but as soon as I click a link within this page, (for instance the “documentation” link), Jaws gets stuck forever on the new page title.

 

Did anyone else notice such an annoying behavior please? Is there a way to fix it?

 

BTW, I am using Chrome 64-bit version 63.0.3239.132 on a Windows 7 64-bit Entreprise Edition computer.

 

Many thanks in advance for any advice. Have a nice day. Chris D


-- 
Sincerely: Randy Barnett
Owner of Soundtique.
Grants Pass, Or.