Date   

Re: best way to regain speech if JAWS is silent?

Randy Barnett <randy@...>
 

You have to use this key combo once to unload Jaws then again to reload Jaws. It is a two step procedure. The second time it will start Jaws and generate an error report to send to FS.

On 11/30/2017 5:32 AM, Paul Hunt wrote:
Hello. JawsKey+WindowsKey+f4 doesn’t work and JAWS doesn’t restart. If I start Narrator and kill the Jaws process I can restart Jaws. The problem is Narrator is too verbose in the Task Manager.

On Nov 29, 2017, at 9:39 PM, Sieghard Weitzel <sieghard@live.ca> wrote:

Just starting Jaws may not be the solution if Jaws has crashed and is displaying some error message. For the most part if you wait long enough Jaws restarts by itself and by "long enough" I mean at least 30 or 40 seconds. After that you can try Jaws Key+Alt+F4, this unloads and reloads Jaws. If that doesn't work you can definitely try to simply launch Jaws either using the Run command as described, Windows+R then type Jaws18 or Jaws2018 and press enter or you can of course set a shortcut key combination like Control+Alt+J.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Alan Robbins
Sent: Wednesday, November 29, 2017 4:50 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

I usually just do a run line command (windows key plus letter r) then type the word jaws followed by version number with no spaces between the word jaws and version number. So to start most current version, the run dialogue box would read following line:
Jaws2018

Once typed simply hit enter and it is up and running.

Al

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Wednesday, November 29, 2017 7:45 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

need to go to the JAWS window. from anywhere, you could press to
insert+f4 and press the spacebar, then control+alt+j or however you want
to start JAWS.


-------- Original Message --------
From: Van Lant, Robin via Groups.Io
[mailto:Robin_Van_Lant=Key.com@groups.io]
Sent: Wednesday, Nov 29, 2017 7:10 PM EST
To: main@jfw.groups.io
Subject: best way to regain speech if JAWS is silent?

What is the best way to regain speech if JAWS goes silent? IN later
versions of Window Eyes, I could just hit the launch hotkeys of Control
Alt W and WE would restart, but this doesn't' work with JAWS. It seems
that Control Alt J may be bringing up the JAWS home screen (or whatever
it's called) and then I can hit Alt F4 to close it, but is this the best
way?



Robin Van Lant | Sr. Program Manager
Strategy & Performance Management | Key Equipment Finance
720-304-1060 | Robin_Van_Lant@key.com



This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. If you
are not the intended recipient, you are strictly prohibited from
disclosing, copying, distributing or using any of this information. If
you received this communication in error, please contact the sender
immediately and destroy the material in its entirety, whether electronic
or hard copy. This communication may contain nonpublic personal
information about consumers subject to the restrictions of the
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or
redisclose such information for any purpose other than to provide the
services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114
If you prefer not to receive future e-mail offers for products or
services from Key
send an e-mail to mailto:DNERequests@key.com with 'No Promotional
E-mails' in the
SUBJECT line.











--
Sincerely: Randy Barnett
Owner of Soundtique.
Grants Pass, Or.


Re: Disk imaging accessibil software

Mario
 

Steve, I don't remember seeing a link to get your demo. could you resend
it please?
TIA

------- Original Message --------
From: Steve Matzura [mailto:number6@noisynotes.com]
Sent: Monday, Nov 27, 2017 9:53 AM EST
To: main@jfw.groups.io
Subject: Disk imaging accessibil software

Yes, that is correct. The reason for having to do this is that, unlike
other backup/restore solutions that can run from the boot drive when
restoring the boot drive, Terabyte works diferently. In other words, the
drive to which you are restoring cannot be the drive that is booted.
That's why you have to run the PE Builder to create a standalone copy of
IFW. I created a short audio on how to do it. I will dig it out  and
post a link to it so you can hear how it's done.


On 11/27/2017 9:41 AM, Jonas Voll wrote:

So in stepp 2. Use the PE Builder to create a standalone copy of IFW
on a separate drive. It can even be on a USB drive as it's quite small.

Is this to create the software program you will need to restore your
backup?

I will assume it’s a small program from “Terabyte Drive Image Backup
and Restore Suite - http://www.terabyteunlimited.com” that you need to
restore from your backups?

JonasVoll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS67213
O: 316-425-7141
F: 316-267-4312
www.envisionus.com <http://www.envisionus.com>

Envision: To improve the quality of life and provide inspiration and
opportunity for people who are blind or visually impaired through
employment, outreach, rehabilitation, education and research.


*From:*main@jfw.groups.io [mailto:main@jfw.groups.io] *On Behalf Of
*Steve Matzura
*Sent:* Monday, November 27, 2017 8:33 AM
*To:* main@jfw.groups.io
*Subject:* Re: Disk imaging accessibil software

Short version:

Assuming the software was installed, first be sure to check the
"accessible checkboxes" option in Settings. Then:

1. Make a full image backup of the drive in question.

2. Use the PE Builder to create a standalone copy of IFW on a separate
drive. It can even be on a USB drive as it's quite small.

3. Go to http://www.opopanax.net/download and obtain the Windows
pre-installation environment creator for your operating system,
Windows 7 or 10, 32- or 64-bit, as you'll need this to restore a boot
drive. Run the creator and make one, either on a USB thumb drive or
DVD. Your system will need to be able to boot from the chosen medium.

When you need to restore:

1. If you're restoring the boot drive, boot the PE you created in Step
2, then run the standalone copy of IFW you created in Step 3.
Otherwise, run the installed copy.

2. Choose the restore function, automatic restore. Follow the prompts.

On 11/27/2017 9:06 AM, Jonas Voll wrote:

    Can you give us some exampels of how one can use this software to
    restor a harddrive that’s is the main boot harddrive from a backup
    job?

    *Jonas Voll*
    Support Technician I
    *Envision, Inc.*
    2301 S Water ST
    Wichita, KS 67213
    O: 316-425-7141
    F: 316-267-4312
    www.envisionus.com <http://www.envisionus.com>

    *Envision: */To improve the quality of life and provide
    inspiration and opportunity for people who are blind or visually
    impaired through employment, outreach, rehabilitation, education
    and research./

    *From:*main@jfw.groups.io <mailto:main@jfw.groups.io>
    [mailto:main@jfw.groups.io] *On Behalf Of *Steve Matzura
    *Sent:* Monday, November 27, 2017 7:56 AM
    *To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
    *Subject:* Re: Disk imaging accessibil software

    Terabyte Drive Image Backup and Restore Suite -
    http://www.terabyteunlimited.com <http://www.terabyteunlimited.com>

    On 11/25/2017 4:22 PM, Nino Dagostino wrote:

        Hi:

        This is Nino, does anybody know of backup and restore that can
        be used by Jaws or Nvda.

        I can backup the computer I just cant restore it with out
        sighted assistance.

        I have a dell xps8900 desktop computer running windows10.

        Thank you in advance.

        Have a good day.


    SonicWall identified this message as clean.

    To manage your junk mail go tohttps://nospam.envisionus.com
    and

    logon with your domain userid and password.

    If you consider this email to be spam please forward it to

    'spam@nospam.envisionus.com <mailto:spam@nospam.envisionus.com>'

    *NOTICE:*This electronic mail message and any attached files are
    confidential. The information is exclusively for the use of the
    individual or entity intended as the recipient. If you are not the
    intended recipient, any use, copying, printing, reviewing,
    retention, disclosure, distribution or forwarding of the message
    or any attached file is not authorized and is strictly prohibited.
    If you have received this electronic mail message in error, please
    advise the sender by reply electronic mail immediately and
    permanently delete the original transmission, any attachments and
    any copies of this message from your computer system.


Re: office 2016 with jaws 2018

 

Microsoft recommends Office 32 bit, there is no need for 64 bit unless you deal with huge spreadsheet files (as in 2 Gb or larger).

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marvin Hunkin via Groups.Io
Sent: Wednesday, November 29, 2017 8:40 PM
To: main@jfw.groups.io
Subject: office 2016 with jaws 2018

 

Hi, installing office 2016 64 bit and got jaws 2018, windows 10 64 bit pro 1709. Any other settings or any possible conflicts with jaws 2018 and office 2016 64 bit.

Thanks.

 

 

Virus-free. www.avast.com


JAWS 2018 and Pal Talk

Derek Czuy
 

Hello list members:

 

My friend has enjoyed using Pal Talk for quite some time. However, when she recently updated it to the current version, the program became unusable with JAWS 2018. Is the previous version of Pal Talk still available? If so, where can it be downloaded from? Are there JAWS scripts available so that JAWS 2018 and the current version of Pal Talk can work together?

 

Thanks.

 

Derek Czuy

               


Re: MICROSOFT OUTLOOK 2016

Drew Hunthausen
 

hello, I've encountered this ame problem switching from 2013 to 2016. Just had someone look at it today and you can get to the different areas and folder lists by control/ tabbing. You need to play with it a little to get used to it but it does work. hope this helps


Re: MICROSOFT OUTLOOK 2016

CathyAnne Murtha
 

By default, Office 2016 uses Backstage to open and save documents.  You can disable backstage open and save so you can use your usual keystrokes.

 

Two handy keystrokes you may want to remember:

  • Save a document F12
  • Open a document CTRL-F12

 

These commands will always open the dialog.

 

To disable backstage save:

 

  • Open backstage ALT-F
  • Navigate with DOWN ARROW to “options” and activate it.

 

This opens the Word Options window.

 

The property sheets are listed on the left side of the window, the options for each property sheet are on the right.

  • Navigate with DOWN ARROW to “Save”
  • Use TAB and SHIFT-TAB to navigate among the options for the property sheet
  • Locate the checkbox labeled “Don’t show the backstage when opening and saving files”
  • Toggle the checkbox off with SPACEBAR

 

Activate the OK button to save your changes and backstage won’t appear when you attempt to open and save documents.

 

 

CathyAnne

 

 

CathyAnne Murtha

Access Technology Institute, LLC

cathy@...

www.blind.training

(520) 300-7859

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marvin Hunkin via Groups.Io
Sent: Wednesday, November 29, 2017 10:19 PM
To: main@jfw.groups.io
Subject: MICROSOFT OUTLOOK 2016

 

HI, GOT THE NEW OUTLOOK 2016, AND IS DIFFERENT FROM OUTLOOK 2010. HAS MENUS, IN THE MAIN AREA, WHERE THE FOLDERS ARE, SO HOW TO GET THE 2010 LOOK IN OUTLOK 2016, USED TO THE NEW OPEN DIALOG BOX, IF ANY ONE CAN HELP WITH HOW TO CUSTOMIZE OFFICE 2016. AND WHEN I DOWNLOADED IT PUT THE OFFICE TOOLS FOLDER, BUT THE PROGRAMS ARE STANDALONE IN THE ALL APPS LIST, WINDOWS 10. SO, ANY ONE ABLE TO HELP ME TO CUSTOMISE OUTLOOK 2016. OR HOW TO GET TO THE FOLDERS,THANKS, NOT A LOT OF DIFFERENCE BETWEEN EXCEL, ACCESS, POWERPOINT, EXCEPT THE OPEN DIALOGS. WAS ABLE TO OPEN A WORD DOCUMENT. THANKS.

 

 

Virus-free. www.avast.com


MICROSOFT OUTLOOK 2016

Marvin Hunkin <neilmarvin@...>
 

HI, GOT THE NEW OUTLOOK 2016, AND IS DIFFERENT FROM OUTLOOK 2010. HAS MENUS, IN THE MAIN AREA, WHERE THE FOLDERS ARE, SO HOW TO GET THE 2010 LOOK IN OUTLOK 2016, USED TO THE NEW OPEN DIALOG BOX, IF ANY ONE CAN HELP WITH HOW TO CUSTOMIZE OFFICE 2016. AND WHEN I DOWNLOADED IT PUT THE OFFICE TOOLS FOLDER, BUT THE PROGRAMS ARE STANDALONE IN THE ALL APPS LIST, WINDOWS 10. SO, ANY ONE ABLE TO HELP ME TO CUSTOMISE OUTLOOK 2016. OR HOW TO GET TO THE FOLDERS,THANKS, NOT A LOT OF DIFFERENCE BETWEEN EXCEL, ACCESS, POWERPOINT, EXCEPT THE OPEN DIALOGS. WAS ABLE TO OPEN A WORD DOCUMENT. THANKS.

 


Virus-free. www.avast.com


office 2016 with jaws 2018

Marvin Hunkin <neilmarvin@...>
 

Hi, installing office 2016 64 bit and got jaws 2018, windows 10 64 bit pro 1709. Any other settings or any possible conflicts with jaws 2018 and office 2016 64 bit.

Thanks.

 


Virus-free. www.avast.com


List Rules, Fri, 12/1/17 #cal-notice

main@jfw.groups.io Calendar <noreply@...>
 

List Rules

When:
Friday, 1 December 2017
12:00am to 1:00am
(GMT-05:00) America/New York

Description:
The following is the current version of the JFW Mailing List policies. These are sent out monthly, and also available from:

http://groups.io/g/jfw/wiki/List-Policies 

 

**List Policies**

1: Keep it clean. We're a family list, and there are people here who probably don't want to hear everything *exactly* that's running through your head. If you wouldn't see it on TV, it doesn't belong in a post to the list. If you're not sure, email the administration before you post it to the list. Otherwise, you stand to see your posts moderated.

2: Stay on topic. We're a JFW-oriented list. That said, anything related to JFW, its functionality with programs etc is acceptable. If it doesn't have to do with JFW, it doesn't belong on the list. This includes, but isn't limited to, talk of other screen readers such as Window Eyes.

3: Listen to, and respect, the wishes of the admins/moderators. If you're asked by an admin or moderator to drop a subject, or take something to private emails (in the instance of two people carrying on a thread list-wide), please do so. If the subject is changed on a thread by an admin or moderator, it will be explained why in the email sent out with it. Please don't continue replying to the old subject.

4: Don't ask over the list for a position on the list administration. If you'd like to help out, it's of course welcome, but address the request to do so to the admin team, otherwise it'll be ignored. Requests are always welcome, whether help is being looked for or not. When help is needed, a post will be made to the list. The requests already received will be kept in mind.

5: Keep flaming to a minimum. This is not limited to flaming of each other, but goes beyond that, to flaming of products, opinions, ideas, suggestions, etc. Constructive criticism never hurts. Flame wars, especially public ones, both drive people from this list and are unwelcome here. either take the problem to private emails, or report the problem to list administration.

6. Respect the opinions and views of others. This is *very* important in any environment, most especially an online environment where the only gage one has on a person is what that person puts to writing. If you come off as hostile in your posting, whether you intended to or not, people will take it as such. Online, "face value" means just that. People make mistakes, people don't always have access to the same information you do. For that matter, people don't always have the same experience you do. If you know how someone can solve their problem, great. Suggest it to them and/or the list. Do *not* proceed to tell someone, on or off list, that they have no business posting. Repeat offenders of this particular rule will be banned for a week to 30 days, depending on the severity. Serious problems will be banned permanently.

As always, if there are problems or questions with regards these policies, don't hesitate to send them off-list to jfw+owner@groups.io

James,
List Admin
 


Re: Selecting Tables in HTML or pdf

Shannon
 

CathyAnne,

Thanks for the F8 key stroke. I didn’t know about it.

Unfortunately it is not working and keeping the formatting in the table structure.

I tried pasting into word and into excel and I had no table in word and all the information pasted into column A of the worksheet.

Bummer.

 

I had some one help me recreate it.

It is one of those convoluted cell phone quotes and they are trying to be sneeky about all the hidden charges.

That irks me. I like to crunch the numbers and make that math work like they say it will.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of CathyAnne Murtha
Sent: Thursday, November 30, 2017 12:12 PM
To: main@jfw.groups.io
Subject: Re: Selecting Tables in HTML or pdf

 

This is easy with JAWS for Windows.

  • Focus in the table (Make sure you’re focused at the top of the table with the virtual cursor)
  • Press F8 to select the entire table
  • Copy the table to your clipboard
  • Paste it into Excel

 

I tried this with several tables and received mixed results with the F8. If the F8 doesn’t select the whole table (read selected text with JAWS KEY-SHFIT-NUMPAD 2), you can also use standard Windows text selection command. JAWS alerts you when you reach the end of the table.

 

Pasting into Excel worked well for me when I tested these steps.

 

 

CathyAnne

 

 

CathyAnne Murtha

Access Technology Institute, LLC

cathy@...

www.blind.training

(520) 300-7859

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Shannon
Sent: Thursday, November 30, 2017 9:27 AM
To: main@jfw.groups.io
Subject: Selecting Tables in HTML or pdf

 

Hi all,

I have a pdf that tells me that it has a table with  7 columns and 28 rows.

Can I select this table to copy it into excel?

 

Thanks

Shannon

 


Re: Problem solved ...... Please help ...... Missing folders & files

Laura Richardson
 

Hello CathyAnne,

 

I must have accidentally done something to change the way my folders and files were listed …… I was able to get my folders and files back to a vertical list as it was before my mess up …… Thank you for your help.

 

Laura

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of CathyAnne Murtha
Sent: Thursday, November 30, 2017 2:06 PM
To: main@jfw.groups.io
Subject: Re: Please help ...... Missing folders & files

 

Hi Laura,

 

Are you speaking of the list view in the “Open” or “Save As” dialog? If your documents aren’t all showing, it could be the “File of Type” combo box.

 

When you open the dialog, press TAB once to focus on the “File Type” combo box and use UP and DOWN ARROW to insure you have the right document type selected. The default should be Word Document .docx.

 

When you change the file type in that combo box, it affects the documents displayed in the list view.

 

 

CathyAnne

 

 

CathyAnne Murtha

Access Technology Institute, LLC

cathy@...

www.blind.training

(520) 300-7859

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Laura Richardson
Sent: Thursday, November 30, 2017 12:35 PM
To: main@jfw.groups.io
Subject: Please help ...... Missing folders & files

 

Hello,

 

Using Windows 10, Jaws 18 & MS Word 2016 ……

 

I plugged in my headphone to my laptop.  Jaws asked what type of headphone and gave me a list of six to choose from; headphones, headphones with microphone, headset, etc.  I pressed enter on headphones and the headphones worked.  I opened a file, typed a few notes, and closed that file.  I then got on the internet and did a few Google searches.  When I got off the internet and went back to my documents I noticed Some of my folders and files are missing.  I checked the recycle bin and they are not there.  I also shut down the computer and turned it back on and they are still not there.

 

NOTE:  If I arrow through the  folders and files in my documents there are quite a few that are not being read to me but when I press the first letter of a file or folder that’s missing Jaws will say the name of that specific file or folder.

 

I’m not very tech savvy and have no idea why this would happen …… Would somebody please help?

 

Thank you,

Laura

 

 

 

 


Re: Fix for Excel 2016 crashing when typing formulas, was Excel 2016 as part of Office 365 issues

 

Hi Russell,

Perfect, works exactly as you describe. This is an easy work-around and one which doesn't cause too much inconvenience otherwise.
Interesting how auto complete causes so many issues since Outlook has issues with it as well or at least had in the past weeks.

Regards,
Sieghard

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Russell Solowoniuk
Sent: Wednesday, November 29, 2017 10:57 AM
To: main@jfw.groups.io
Subject: Fix for Excel 2016 crashing when typing formulas, was Excel 2016 as part of Office 365 issues

Hi Sieghard & all,

Good news! I found a fix for the issue of Excel 2016 crashing when typing a formula while running a screen reader.

Here's what to do...

1. in Excel, go to File > Options (Alt +F, T).
2. Arrow down to "Formulas".
3. Tab till you hear Jaws say "Working with Formulas, Formula AutoComplete, checked", and press the spacebar to uncheck the formula autocomplete.
4. Tab to the OK button and press enter. Now try to type a formula, and all should be well!

I found an article on the web where someone was having this issue with Excel on the Mac, and he tried turning off a number of options, and found that an autocomplete option was causing his issues. The options were a little different, but I went through all the autocomplete options, and tried the formula autocomplete and was so excited to find that it worked!

Good luck all.

Russell


Re: Please help ...... Missing folders & files

CathyAnne Murtha
 

Hi Laura,

 

Are you speaking of the list view in the “Open” or “Save As” dialog? If your documents aren’t all showing, it could be the “File of Type” combo box.

 

When you open the dialog, press TAB once to focus on the “File Type” combo box and use UP and DOWN ARROW to insure you have the right document type selected. The default should be Word Document .docx.

 

When you change the file type in that combo box, it affects the documents displayed in the list view.

 

 

CathyAnne

 

 

CathyAnne Murtha

Access Technology Institute, LLC

cathy@...

www.blind.training

(520) 300-7859

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Laura Richardson
Sent: Thursday, November 30, 2017 12:35 PM
To: main@jfw.groups.io
Subject: Please help ...... Missing folders & files

 

Hello,

 

Using Windows 10, Jaws 18 & MS Word 2016 ……

 

I plugged in my headphone to my laptop.  Jaws asked what type of headphone and gave me a list of six to choose from; headphones, headphones with microphone, headset, etc.  I pressed enter on headphones and the headphones worked.  I opened a file, typed a few notes, and closed that file.  I then got on the internet and did a few Google searches.  When I got off the internet and went back to my documents I noticed Some of my folders and files are missing.  I checked the recycle bin and they are not there.  I also shut down the computer and turned it back on and they are still not there.

 

NOTE:  If I arrow through the  folders and files in my documents there are quite a few that are not being read to me but when I press the first letter of a file or folder that’s missing Jaws will say the name of that specific file or folder.

 

I’m not very tech savvy and have no idea why this would happen …… Would somebody please help?

 

Thank you,

Laura

 

 

 

 


Please help ...... Missing folders & files

Laura Richardson
 

Hello,

 

Using Windows 10, Jaws 18 & MS Word 2016 ……

 

I plugged in my headphone to my laptop.  Jaws asked what type of headphone and gave me a list of six to choose from; headphones, headphones with microphone, headset, etc.  I pressed enter on headphones and the headphones worked.  I opened a file, typed a few notes, and closed that file.  I then got on the internet and did a few Google searches.  When I got off the internet and went back to my documents I noticed Some of my folders and files are missing.  I checked the recycle bin and they are not there.  I also shut down the computer and turned it back on and they are still not there.

 

NOTE:  If I arrow through the  folders and files in my documents there are quite a few that are not being read to me but when I press the first letter of a file or folder that’s missing Jaws will say the name of that specific file or folder.

 

I’m not very tech savvy and have no idea why this would happen …… Would somebody please help?

 

Thank you,

Laura

 

 

 

 


Re: cannot get key label muting to work

netbat66
 

a few things first.
make sure you have loaded the default .jss file. if you don't changes you make will only apply to the application jss no t the default one.
***
if you want the control,alt,windows keys etc. to silence there is a work around.
in the keyboard labeler you can not mute them. but if you change the label name and delete them there will be nothing there for jaws to speak.

-----Original Message-----
From: Michael Mote
Sent: Thursday, November 30, 2017 5:17 AM
To: main@jfw.groups.io
Subject: Re: cannot get key label muting to work



Have you tried turning off key echo in the set-up wizard?







From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Van Lant, Robin via Groups.Io
Sent: Thursday, November 30, 2017 12:34 AM
To: main@jfw.groups.io
Subject: cannot get key label muting to work





I’m trying to get JAWS to stop voicing Control, Shift, Alt and tab each time I hit them, especially when alt tabbing through open programs. I followed the directions I had seen here to search for Label in the settings center and found the list of keys with their status. I changed the setting for Tab to Mute, but it’s still saying it. Also, when I try to change the setting for Control, Shift and Alt, I get a pop-up saying that I cannot mute these because they are used in combination with other keys. What am I missing?







Robin Van Lant | Sr. Program Manager

Strategy & Performance Management | Key Equipment Finance

720-304-1060 | Robin_Van_Lant@key.com





This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@key.com with 'No Promotional E-mails' in the SUBJECT line.


Re: Selecting Tables in HTML or pdf

CathyAnne Murtha
 

This is easy with JAWS for Windows.

  • Focus in the table (Make sure you’re focused at the top of the table with the virtual cursor)
  • Press F8 to select the entire table
  • Copy the table to your clipboard
  • Paste it into Excel

 

I tried this with several tables and received mixed results with the F8. If the F8 doesn’t select the whole table (read selected text with JAWS KEY-SHFIT-NUMPAD 2), you can also use standard Windows text selection command. JAWS alerts you when you reach the end of the table.

 

Pasting into Excel worked well for me when I tested these steps.

 

 

CathyAnne

 

 

CathyAnne Murtha

Access Technology Institute, LLC

cathy@...

www.blind.training

(520) 300-7859

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Shannon
Sent: Thursday, November 30, 2017 9:27 AM
To: main@jfw.groups.io
Subject: Selecting Tables in HTML or pdf

 

Hi all,

I have a pdf that tells me that it has a table with  7 columns and 28 rows.

Can I select this table to copy it into excel?

 

Thanks

Shannon

 


Re: Surprising mispronunciation with Nathan compact voice

Van Lant, Robin
 

Interesting. I'm not on my JAWS computer at the moment, but I was using Nathan Compact.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mike Rogers
Sent: Thursday, November 30, 2017 9:40 AM
To: main@jfw.groups.io
Subject: Re: Surprising mispronunciation with Nathan compact voice

mail male I'm using Nathan premium and he pronounces both ways correctly. But Regina is pronounced withthe long I. You can always use pronunciation dictionary to change that.

********************************

www.harmonicaworkshops.com



On Thu, 30 Nov 2017 16:33:14 +0000
"Van Lant, Robin via Groups.Io" <Robin_Van_Lant=Key.com@groups.io> wrote:

I'm using the Volcalizer Expressive voices and am surprised to find that Nathan mispronounces the word "male" - as in I have a male Yellow lab guide dog. Instead of saying it as "mail" (homonym to what the post office delivers), it says "ma lay". So strange! It says female correctly. The other American voices I have tried do not say it incorrectly.

I've also noticed that all of the voices I have tried say the girl's name Regina like the city in Canada, as opposed to Regeena. Funny how synthesizers are programmed.

So, on this note, where do I change pronunciations? A search in the settings did not turn up anything obvious.





Robin Van Lant | Sr. Program Manager
Strategy & Performance Management | Key Equipment Finance
720-304-1060 | Robin_Van_Lant@key.com



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114 If you prefer not to receive
future e-mail offers for products or services from Key send an e-mail
to mailto:DNERequests@key.com with 'No Promotional E-mails' in the
SUBJECT line.


Re: Surprising mispronunciation with Nathan compact voice

Mike Rogers
 

mail male I'm using Nathan premium and he pronounces both ways correctly. But Regina is pronounced withthe long I. You can always use pronunciation dictionary to change that.

********************************

www.harmonicaworkshops.com



On Thu, 30 Nov 2017 16:33:14 +0000
"Van Lant, Robin via Groups.Io" <Robin_Van_Lant=Key.com@groups.io> wrote:

I'm using the Volcalizer Expressive voices and am surprised to find that Nathan mispronounces the word "male" - as in I have a male Yellow lab guide dog. Instead of saying it as "mail" (homonym to what the post office delivers), it says "ma lay". So strange! It says female correctly. The other American voices I have tried do not say it incorrectly.

I've also noticed that all of the voices I have tried say the girl's name Regina like the city in Canada, as opposed to Regeena. Funny how synthesizers are programmed.

So, on this note, where do I change pronunciations? A search in the settings did not turn up anything obvious.





Robin Van Lant | Sr. Program Manager
Strategy & Performance Management | Key Equipment Finance
720-304-1060 | Robin_Van_Lant@key.com



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114
If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@key.com with 'No Promotional E-mails' in the
SUBJECT line.


Re: JAWS and Malwarebytes

Steve Matzura
 

Or you can type MALW from the Windows 7/10 Start menu search field.

On 11/29/2017 2:49 PM, Robert Logue wrote:
Not using Malwarebytes right now. But I think you can get to the menus from the system tray.  See if it shows up there.  Then right click or press context key and use arrows to bring up a menu. Sorry my memory isn't more precice.


Bob


On 2017-11-27 6:40 AM, Ibrahim Ajayi wrote:
Hello:
Does anyone use malwarebytes.  I've just installed it on my computer,
and it is not working.  Each time I attempt to use it, it does not
open.
I use JAWS16, and I use windows 7-32bit.
If anyone uses it, how do you use it.  I launched it from the start
menu, and also from the all programs submenu, but as I said it didn't
open.
Please help if you can.
 From Ibrahim.




Surprising mispronunciation with Nathan compact voice

Van Lant, Robin
 

I’m using the Volcalizer Expressive voices and am surprised to find that Nathan mispronounces the word “male” – as in I have a male Yellow lab guide dog.  Instead of saying it as “mail” (homonym to what the post office delivers), it says “ma lay”.  So strange!  It says female correctly.  The other American voices I have tried do not say it incorrectly. 

 

I’ve also noticed that all of the voices I have tried say the girl’s name Regina like the city in Canada, as opposed to Regeena.   Funny how synthesizers are programmed. 

 

So, on this note, where do I change pronunciations?  A search in the settings did not turn up anything obvious.

 

 

 

 

 

Robin Van Lant | Sr. Program Manager

Strategy & Performance Management | Key Equipment Finance

720-304-1060 | Robin_Van_Lant@...

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.