Date   

moderated Re: After purchasing SMA?

David Diamond
 

Let’s see.  At least 2 garden hoses, dog leashes not including seat belt harnesses, computer accessories, coffee, flea meds for my guide, range extenders for my WIFI, kitchen utensil’s, including a coffee pot replacement for a coffee maker I purchased through Amazon  Etc. Anyway this is veering off topic.  Smile.    

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: July 10, 2021 8:07 AM
To: main@jfw.groups.io
Subject: Re: After purchasing SMA?

 

I am not sure what you are ordering because as I said, apart from the odd item which comes from a seller in the States GST and PST always apply to anything I order unless it is, for some reason, tax exempt like maybe some food staples and so on.

And your message definitely very much sounded like you were saying a prime membership would get you items tax-free, you wrote:

 

I have a prime membership which pretty much makes paying taxes on purchases a non issue.  No taxes are paid or shipping for that matter

 

The shipping part of course is clear and is outlined exactly on the Amazon Canada page where all the benefits are explained, but there is nothing which indicates that a prime membership " makes paying taxes on purchases a non issue":

https://www.amazon.ca/gp/help/customer/display.html/ref=vnid_G6LDPN7YJHYKH2J6?nodeId=G6LDPN7YJHYKH2J6

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Diamond
Sent: Friday, July 9, 2021 3:20 PM
To: main@jfw.groups.io
Subject: Re: After purchasing SMA?

 

Sieghard , I was not implying or meaning to imply that a Amazon prime membership allowed you not to pay taxes.  Jus, I rarely have had to pay provincial or HST on any products I’ve purchased from Amazon. When ones purchases exceed $100 frequently, 12% taxes is $12 in taxes. That adds up.    

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: July 9, 2021 7:50 AM
To: main@jfw.groups.io
Subject: Re: After purchasing SMA?

 

Hi David,

 

I'm sorry, but what gives you the idea that an Amazon Prime membership means Amazon doesn't have to charge you taxes? I order a fair bit from Amazon since I live in a very small town where I often can't find the same selection as you get in the big city and I have a personal Amazon account with a prime membership as well as an Amazon business account with Amazon Business Prime and except in a few cases where the item comes from a seller outside of Canada and it is not veryt expensive 5% GST and 7% PST (I live in British Columbia) are always applied to every purchase.

 

Best regards,

Sieghard

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Diamond
Sent: Wednesday, July 7, 2021 10:14 AM
To: main@jfw.groups.io
Subject: Re: After purchasing SMA?

 

Well, I had no idea sales tax was applied to the SMA in the United States.  In Canada if you can prove you have a vision problem, registered with the CNIB (Canadian National Institute for the Blind) you are tax exempt from the purchase of the SMA.  As for Amazon, although not related, I have a prime membership which pretty much makes paying taxes on purchases a non issue.  No taxes are paid or shipping for that matter unless I don’t listen to the prompt of shipping costs.  There are times where the shipping cost is more then the actual item. 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of leonard morris
Sent: July 7, 2021 10:00 AM
To: main@jfw.groups.io
Subject: Re: After purchasing SMA?

 

I believe they are physically located in Florida. However, this does not matter. My zipcode is in Sacramento therefore I pay sales tax there. Amazon is out of Seattle I think but again I have to pay sales tax according to my zipcode. The state of Oregon has no sales tax so no taxes on purchased items unless they have a law for Internet purchased products.  

 

Every country has an identity, history, custom, and culture. It’s a unique landscape in determining how its people Live, work, and play.


From: main@jfw.groups.io <main@jfw.groups.io> on behalf of Mario <mrb620@...>
Sent: Thursday, July 8, 2021 12:40:31 AM
To: main@jfw.groups.io <main@jfw.groups.io>
Subject: Re: After purchasing SMA?

 

maybe I'm not getting it, but the issue for me is FS doesn't have a
physical presence in New York, so why am I being charged sales tax?

-------- Original Message --------
From: Alan Lemly [mailto:walemly@...]
Subject: After purchasing SMA?
Date: Wednesday, July 7, 2021, 11:43 AM
To: <main@jfw.groups.io>
Mario,

The application of sales tax is a function of where you reside and your
state’s laws regarding whether sales tax applies to computer software
and its various forms. If your state applies sales tax to software and
Freedom Scientific has a physical presence in your state, Freedom
Scientific is obligated to collect sales tax and remit it to the state.
The sales tax should be calculated on the discounted price of the
software or SMA.

Like other tax laws, application of sales tax is an ever changing
situation. So, just because it did not apply in the past, doesn’t mean
it won’t in the future.

Alan Lemly

*From:* main@jfw.groups.io <main@jfw.groups.io> *On Behalf Of *Shirley Tracy
*Sent:* Wednesday, July 7, 2021 9:22 AM
*To:* main@jfw.groups.io
*Subject:* Re: After purchasing SMA?

Did you order online? I had to call in and they are refunding me the
over charge.

HTH.

Shirley Tracy

*From: *Mario <mailto:mrb620@...>
*Sent: *Wednesday, July 7, 2021 10:10 AM
*To: *main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject: *Re: After purchasing SMA?

not sure if I should complain, but before purchasing mine and applying

the 20% discount, there was sales tax added which now reduces the value

of the discount to about 12%. in previous years when I upgraded the SMA,

I never had to pay a sales tax. what should I do, let it slide or

contact Erik?

-------- Original Message --------

From: Mike B [mailto:mb69mach1@... <mailto:mb69mach1@...>]

Subject: After purchasing SMA?

Date: Tuesday, July 6, 2021, 7:44 PM

To: <main@jfw.groups.io <mailto:main@jfw.groups.io>>

Hi Loy,

I updated my SMA to 2023 & 2024 over the weekend and today I got a

message to update my authorization when J2021 started.  I got this

authorization update message for each computer, so you'll probably

getting the same message pretty soon.

Stay safe & take care.  Mike.

Just once, I want a username and password prompt to say:  "Close Enough!"

----- Original Message -----

*From:* Loy <mailto:loyrg2845@... <mailto:loyrg2845@...>>

*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<mailto:main@jfw.groups.io <mailto:main@jfw.groups.io>>

*Sent:* Tuesday, July 06, 2021 6:45 AM

*Subject:* After purchasing SMA?

After purchasing a SMA, how do I get it to show  the new amount of

upgrades I have.




moderated Re: Outlook cuts off some of the words on a line.

Bill White
 

Hi, Richare. My problem with turning off the block quote setting is that, when it is off, you can't tell the quotation from the rest of the email, since there are no quotation marks in a block quote.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Sunday, July 11, 2021 8:06 AM
To: main@jfw.groups.io
Subject: Re: Outlook cuts off some of the words on a line.

 

Thanks Bill,

What confused me about this setting is that the word “blockquote” appears in the text instead of just speaking that this is a blockquote, so if you copy the body of the email, you get the words blockquote and Blockquote end, and frankly, since I know what a blockquote is, and don’t really care to hear it announced, turning it off is an excellent tip, thank you for that.

Perhaps in a Word document, I might care about formatting like that, but not in an email.  But that is my personal preference and I’m stuck with it. 😊

 

Thanks,

 

 

 

Richard

Software means never having to say you're finished

 

Web site: www.turner42.com

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Saturday, July 10, 2021 10:37 PM
To: main@jfw.groups.io
Subject: Re: Outlook cuts off some of the words on a line.

 

Hi, Albert and Richard. JAWS does not substitute the words block quote for the html code by mistake. This is an indication that a block quote is being read. A block quote is a section of text that is being quoted, and is indented about three spaces both on the left and on the right side of the text. If you want this turned off, you can do the following,

 

1. Open Outlook.

2. Press JAWS key plus the number six on the numbers row, to open JAWS Settings Center.

3. Arrow down to Web/Html/Pdf's closed, and press Right Arrow to open.

4. Arrow down to Reading, closed, and press Right Arrow to open.

5. Arrow down, and check which verbocity level is set for your configuration of Outlook. It will say either High, Medium, or Low.

6. Once you have found which verbocity level applies to your configuration of Outlook, proceed to step 7.

7. Arrow down to Configure Web Verbocity Levels, closed, and press Right Arrow to open.

8. Find the verbocity level that you need to change. It will be the one (High, Medium, or Low) from above, and press the SPACE BAR to open the configuration menu.

9. Find Block Quotation (it should be at or near the top of the list), and if it is checked, uncheck it.

10. TAB to the OK button, and press SPACE.

11. TAB to the second OK button and press SPACE.

 

Now that the Block Quote indication is turned off, you will not hear the words Block Quote when traversing a block quote. Note, however, that this is an indication of how text is formatted, and if you wish to know if you are on a block quote when this indicator is turned off, you will need to look at the beginning of a line and check if there are more spaces than usual to know if you are reading a block quote.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Saturday, July 10, 2021 4:17 PM
To: main@jfw.groups.io
Subject: Re: Outlook cuts off some of the words on a line.

 

First, make sure the window is Maximized. 

Jaws substitutes the html code for a blockquote, with the words for some very confusing reason.

Are you reading line by line, or with Say All?

I have the same setup and have not experienced the cut off words.

Also, make sure there isn't another program open with a dialog that could be overlapping somehow.

Those are my best guesses.

 

 

Richard 

"Great minds discuss ideas, average minds discuss events, small minds discuss people." -- Eleanor Roosevelt

 

 

 

On Jul 10, 2021, at 4:11 PM, Albert Cutolo <Albertc51@...> wrote:



Good evening everyone, 

 

It seems that whenever I’m reading messages that are open in outlook with office 365, and latest jaws 2021, some of the words in a line that’s being supposed to be read, it seems that some of the words get cut off  and I have too arrow down to complete the message that I’m reading.  I do have the reading pane turned off.  My question here is that, is there a setting that I need too change, and if so what is it, and how to I go about making that change.  Sometimes, I also get a message that says block quote, or block quote end before the   I’m able too start reading a message.            


moderated Re: Outlook cuts off some of the words on a line.

Richard Turner <richardturner42@...>
 

Thanks Bill,

What confused me about this setting is that the word “blockquote” appears in the text instead of just speaking that this is a blockquote, so if you copy the body of the email, you get the words blockquote and Blockquote end, and frankly, since I know what a blockquote is, and don’t really care to hear it announced, turning it off is an excellent tip, thank you for that.

Perhaps in a Word document, I might care about formatting like that, but not in an email.  But that is my personal preference and I’m stuck with it. 😊

 

Thanks,

 

 

 

Richard

Software means never having to say you're finished

 

Web site: www.turner42.com

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Saturday, July 10, 2021 10:37 PM
To: main@jfw.groups.io
Subject: Re: Outlook cuts off some of the words on a line.

 

Hi, Albert and Richard. JAWS does not substitute the words block quote for the html code by mistake. This is an indication that a block quote is being read. A block quote is a section of text that is being quoted, and is indented about three spaces both on the left and on the right side of the text. If you want this turned off, you can do the following,

 

1. Open Outlook.

2. Press JAWS key plus the number six on the numbers row, to open JAWS Settings Center.

3. Arrow down to Web/Html/Pdf's closed, and press Right Arrow to open.

4. Arrow down to Reading, closed, and press Right Arrow to open.

5. Arrow down, and check which verbocity level is set for your configuration of Outlook. It will say either High, Medium, or Low.

6. Once you have found which verbocity level applies to your configuration of Outlook, proceed to step 7.

7. Arrow down to Configure Web Verbocity Levels, closed, and press Right Arrow to open.

8. Find the verbocity level that you need to change. It will be the one (High, Medium, or Low) from above, and press the SPACE BAR to open the configuration menu.

9. Find Block Quotation (it should be at or near the top of the list), and if it is checked, uncheck it.

10. TAB to the OK button, and press SPACE.

11. TAB to the second OK button and press SPACE.

 

Now that the Block Quote indication is turned off, you will not hear the words Block Quote when traversing a block quote. Note, however, that this is an indication of how text is formatted, and if you wish to know if you are on a block quote when this indicator is turned off, you will need to look at the beginning of a line and check if there are more spaces than usual to know if you are reading a block quote.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Saturday, July 10, 2021 4:17 PM
To: main@jfw.groups.io
Subject: Re: Outlook cuts off some of the words on a line.

 

First, make sure the window is Maximized. 

Jaws substitutes the html code for a blockquote, with the words for some very confusing reason.

Are you reading line by line, or with Say All?

I have the same setup and have not experienced the cut off words.

Also, make sure there isn't another program open with a dialog that could be overlapping somehow.

Those are my best guesses.

 

 

Richard 

"Great minds discuss ideas, average minds discuss events, small minds discuss people." -- Eleanor Roosevelt

 

 



On Jul 10, 2021, at 4:11 PM, Albert Cutolo <Albertc51@...> wrote:



Good evening everyone, 

 

It seems that whenever I’m reading messages that are open in outlook with office 365, and latest jaws 2021, some of the words in a line that’s being supposed to be read, it seems that some of the words get cut off  and I have too arrow down to complete the message that I’m reading.  I do have the reading pane turned off.  My question here is that, is there a setting that I need too change, and if so what is it, and how to I go about making that change.  Sometimes, I also get a message that says block quote, or block quote end before the   I’m able too start reading a message.            


moderated Re: Outlook cuts off some of the words on a line.

Bill White
 

Hi, again, Dave. I just checked, and what I get is as follows, In step 10, I have an OK button. If I press that, I tab again, and in step 11, as you said, there is an Apply button. If I press that, I can TAB, and there is another OK button. If I press that, I have no need to close Settings Center with ALT plus F4. So, in actuality I left out a step after step 11 and there could be a step 12. I don't like using ALT plus F4 to close windows in recent years, as it sometimes leads to behaviors other than what I expect, such as windows not closing, or even the closing of more than one window. I suspect that you are correct, though, in saying that after step 10, you can press ALT plus F4 and close the window. What I do, Dave is, when I am outlining a procedure, I am actually performing the operation on a second computer, while I am writing down the steps on the first computer. I don't know how I missed the Apply button, but I did. Thanks for the heads up.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Dave Durber
Sent: Sunday, July 11, 2021 4:22 AM
To: main@jfw.groups.io
Subject: Re: Outlook cuts off some of the words on a line.

 

Bill:

 

In steps 10 and 11, the instructions should be:

 

10. TAB to the Apply button, and press SPACE.

 

11. TAB to the OK button and press SPACE then, press ALT+F4, to close the Settings Center.

 

HTH

 

Dave

 

----- Original Message -----

From: Bill White

Sent: Sunday, July 11, 2021 6:37 AM

Subject: Re: Outlook cuts off some of the words on a line.

 

Hi, Albert and Richard. JAWS does not substitute the words block quote for the html code by mistake. This is an indication that a block quote is being read. A block quote is a section of text that is being quoted, and is indented about three spaces both on the left and on the right side of the text. If you want this turned off, you can do the following,

 

1. Open Outlook.

2. Press JAWS key plus the number six on the numbers row, to open JAWS Settings Center.

3. Arrow down to Web/Html/Pdf's closed, and press Right Arrow to open.

4. Arrow down to Reading, closed, and press Right Arrow to open.

5. Arrow down, and check which verbocity level is set for your configuration of Outlook. It will say either High, Medium, or Low.

6. Once you have found which verbocity level applies to your configuration of Outlook, proceed to step 7.

7. Arrow down to Configure Web Verbocity Levels, closed, and press Right Arrow to open.

8. Find the verbocity level that you need to change. It will be the one (High, Medium, or Low) from above, and press the SPACE BAR to open the configuration menu.

9. Find Block Quotation (it should be at or near the top of the list), and if it is checked, uncheck it.

10. TAB to the OK button, and press SPACE.

11. TAB to the second OK button and press SPACE.

 

Now that the Block Quote indication is turned off, you will not hear the words Block Quote when traversing a block quote. Note, however, that this is an indication of how text is formatted, and if you wish to know if you are on a block quote when this indicator is turned off, you will need to look at the beginning of a line and check if there are more spaces than usual to know if you are reading a block quote.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Saturday, July 10, 2021 4:17 PM
To: main@jfw.groups.io
Subject: Re: Outlook cuts off some of the words on a line.

 

First, make sure the window is Maximized. 

Jaws substitutes the html code for a blockquote, with the words for some very confusing reason.

Are you reading line by line, or with Say All?

I have the same setup and have not experienced the cut off words.

Also, make sure there isn't another program open with a dialog that could be overlapping somehow.

Those are my best guesses.

 

 

Richard 

"Great minds discuss ideas, average minds discuss events, small minds discuss people." -- Eleanor Roosevelt

 

www.turner42.com

 



On Jul 10, 2021, at 4:11 PM, Albert Cutolo <Albertc51@...> wrote:



Good evening everyone, 

 

It seems that whenever I’m reading messages that are open in outlook with office 365, and latest jaws 2021, some of the words in a line that’s being supposed to be read, it seems that some of the words get cut off  and I have too arrow down to complete the message that I’m reading.  I do have the reading pane turned off.  My question here is that, is there a setting that I need too change, and if so what is it, and how to I go about making that change.  Sometimes, I also get a message that says block quote, or block quote end before the   I’m able too start reading a message.            


moderated Re: Outlook cuts off some of the words on a line.

Bill White
 

Hi, Dave. In steps 10 and 11, for me, in step 10, if I tab, I get an OK button, not an Apply button. In step 11, if I tab to the OK button, and press Space or Enter, it automatically closes Settings Center, so there is no need to use ALT plus F4.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Dave Durber
Sent: Sunday, July 11, 2021 4:22 AM
To: main@jfw.groups.io
Subject: Re: Outlook cuts off some of the words on a line.

 

Bill:

 

In steps 10 and 11, the instructions should be:

 

10. TAB to the Apply button, and press SPACE.

 

11. TAB to the OK button and press SPACE then, press ALT+F4, to close the Settings Center.

 

HTH

 

Dave

 

----- Original Message -----

From: Bill White

Sent: Sunday, July 11, 2021 6:37 AM

Subject: Re: Outlook cuts off some of the words on a line.

 

Hi, Albert and Richard. JAWS does not substitute the words block quote for the html code by mistake. This is an indication that a block quote is being read. A block quote is a section of text that is being quoted, and is indented about three spaces both on the left and on the right side of the text. If you want this turned off, you can do the following,

 

1. Open Outlook.

2. Press JAWS key plus the number six on the numbers row, to open JAWS Settings Center.

3. Arrow down to Web/Html/Pdf's closed, and press Right Arrow to open.

4. Arrow down to Reading, closed, and press Right Arrow to open.

5. Arrow down, and check which verbocity level is set for your configuration of Outlook. It will say either High, Medium, or Low.

6. Once you have found which verbocity level applies to your configuration of Outlook, proceed to step 7.

7. Arrow down to Configure Web Verbocity Levels, closed, and press Right Arrow to open.

8. Find the verbocity level that you need to change. It will be the one (High, Medium, or Low) from above, and press the SPACE BAR to open the configuration menu.

9. Find Block Quotation (it should be at or near the top of the list), and if it is checked, uncheck it.

10. TAB to the OK button, and press SPACE.

11. TAB to the second OK button and press SPACE.

 

Now that the Block Quote indication is turned off, you will not hear the words Block Quote when traversing a block quote. Note, however, that this is an indication of how text is formatted, and if you wish to know if you are on a block quote when this indicator is turned off, you will need to look at the beginning of a line and check if there are more spaces than usual to know if you are reading a block quote.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Saturday, July 10, 2021 4:17 PM
To: main@jfw.groups.io
Subject: Re: Outlook cuts off some of the words on a line.

 

First, make sure the window is Maximized. 

Jaws substitutes the html code for a blockquote, with the words for some very confusing reason.

Are you reading line by line, or with Say All?

I have the same setup and have not experienced the cut off words.

Also, make sure there isn't another program open with a dialog that could be overlapping somehow.

Those are my best guesses.

 

 

Richard 

"Great minds discuss ideas, average minds discuss events, small minds discuss people." -- Eleanor Roosevelt

 

www.turner42.com

 



On Jul 10, 2021, at 4:11 PM, Albert Cutolo <Albertc51@...> wrote:



Good evening everyone, 

 

It seems that whenever I’m reading messages that are open in outlook with office 365, and latest jaws 2021, some of the words in a line that’s being supposed to be read, it seems that some of the words get cut off  and I have too arrow down to complete the message that I’m reading.  I do have the reading pane turned off.  My question here is that, is there a setting that I need too change, and if so what is it, and how to I go about making that change.  Sometimes, I also get a message that says block quote, or block quote end before the   I’m able too start reading a message.            


moderated Re: power pi

Cohn, Jonathan
 

I have no idea what Power PI is but Freedom Scientific Training has done several videos available on Youtube for working with Microsoft Office.

Take Care!
Jonathan

On Jul 11, 2021, at 09:12, romance's prince via groups.io <romanticbiro=yahoo.co.uk@groups.io> wrote:

hello dears
is microsoft power pi accessible to use with jaws?
is any tutorial for it?

also, searching for tutorials for office 365 with jaws.
thanks





moderated power pi

romance's prince
 

hello dears
is microsoft power pi accessible to use with jaws?
is any tutorial for it?

also, searching for tutorials for office 365 with jaws.
thanks


moderated Re: Outlook cuts off some of the words on a line.

Dave Durber
 


Bill:
 
In steps 10 and 11, the instructions should be:
 
10. TAB to the Apply button, and press SPACE.
 
11. TAB to the OK button and press SPACE then, press ALT+F4, to close the Settings Center.
 
HTH
 
Dave
 

----- Original Message -----
From: Bill White
Sent: Sunday, July 11, 2021 6:37 AM
Subject: Re: Outlook cuts off some of the words on a line.

Hi, Albert and Richard. JAWS does not substitute the words block quote for the html code by mistake. This is an indication that a block quote is being read. A block quote is a section of text that is being quoted, and is indented about three spaces both on the left and on the right side of the text. If you want this turned off, you can do the following,

 

1. Open Outlook.

2. Press JAWS key plus the number six on the numbers row, to open JAWS Settings Center.

3. Arrow down to Web/Html/Pdf's closed, and press Right Arrow to open.

4. Arrow down to Reading, closed, and press Right Arrow to open.

5. Arrow down, and check which verbocity level is set for your configuration of Outlook. It will say either High, Medium, or Low.

6. Once you have found which verbocity level applies to your configuration of Outlook, proceed to step 7.

7. Arrow down to Configure Web Verbocity Levels, closed, and press Right Arrow to open.

8. Find the verbocity level that you need to change. It will be the one (High, Medium, or Low) from above, and press the SPACE BAR to open the configuration menu.

9. Find Block Quotation (it should be at or near the top of the list), and if it is checked, uncheck it.

10. TAB to the OK button, and press SPACE.

11. TAB to the second OK button and press SPACE.

 

Now that the Block Quote indication is turned off, you will not hear the words Block Quote when traversing a block quote. Note, however, that this is an indication of how text is formatted, and if you wish to know if you are on a block quote when this indicator is turned off, you will need to look at the beginning of a line and check if there are more spaces than usual to know if you are reading a block quote.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Saturday, July 10, 2021 4:17 PM
To: main@jfw.groups.io
Subject: Re: Outlook cuts off some of the words on a line.

 

First, make sure the window is Maximized. 

Jaws substitutes the html code for a blockquote, with the words for some very confusing reason.

Are you reading line by line, or with Say All?

I have the same setup and have not experienced the cut off words.

Also, make sure there isn't another program open with a dialog that could be overlapping somehow.

Those are my best guesses.

 

 

Richard 

"Great minds discuss ideas, average minds discuss events, small minds discuss people." -- Eleanor Roosevelt

 

www.turner42.com

 



On Jul 10, 2021, at 4:11 PM, Albert Cutolo <Albertc51@...> wrote:



Good evening everyone, 

 

It seems that whenever I’m reading messages that are open in outlook with office 365, and latest jaws 2021, some of the words in a line that’s being supposed to be read, it seems that some of the words get cut off  and I have too arrow down to complete the message that I’m reading.  I do have the reading pane turned off.  My question here is that, is there a setting that I need too change, and if so what is it, and how to I go about making that change.  Sometimes, I also get a message that says block quote, or block quote end before the   I’m able too start reading a message.            


moderated Re: Outlook cuts off some of the words on a line.

Bill White
 

Hi, Albert and Richard. JAWS does not substitute the words block quote for the html code by mistake. This is an indication that a block quote is being read. A block quote is a section of text that is being quoted, and is indented about three spaces both on the left and on the right side of the text. If you want this turned off, you can do the following,

 

1. Open Outlook.

2. Press JAWS key plus the number six on the numbers row, to open JAWS Settings Center.

3. Arrow down to Web/Html/Pdf's closed, and press Right Arrow to open.

4. Arrow down to Reading, closed, and press Right Arrow to open.

5. Arrow down, and check which verbocity level is set for your configuration of Outlook. It will say either High, Medium, or Low.

6. Once you have found which verbocity level applies to your configuration of Outlook, proceed to step 7.

7. Arrow down to Configure Web Verbocity Levels, closed, and press Right Arrow to open.

8. Find the verbocity level that you need to change. It will be the one (High, Medium, or Low) from above, and press the SPACE BAR to open the configuration menu.

9. Find Block Quotation (it should be at or near the top of the list), and if it is checked, uncheck it.

10. TAB to the OK button, and press SPACE.

11. TAB to the second OK button and press SPACE.

 

Now that the Block Quote indication is turned off, you will not hear the words Block Quote when traversing a block quote. Note, however, that this is an indication of how text is formatted, and if you wish to know if you are on a block quote when this indicator is turned off, you will need to look at the beginning of a line and check if there are more spaces than usual to know if you are reading a block quote.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Saturday, July 10, 2021 4:17 PM
To: main@jfw.groups.io
Subject: Re: Outlook cuts off some of the words on a line.

 

First, make sure the window is Maximized. 

Jaws substitutes the html code for a blockquote, with the words for some very confusing reason.

Are you reading line by line, or with Say All?

I have the same setup and have not experienced the cut off words.

Also, make sure there isn't another program open with a dialog that could be overlapping somehow.

Those are my best guesses.

 

 

Richard 

"Great minds discuss ideas, average minds discuss events, small minds discuss people." -- Eleanor Roosevelt

 

www.turner42.com

 



On Jul 10, 2021, at 4:11 PM, Albert Cutolo <Albertc51@...> wrote:



Good evening everyone, 

 

It seems that whenever I’m reading messages that are open in outlook with office 365, and latest jaws 2021, some of the words in a line that’s being supposed to be read, it seems that some of the words get cut off  and I have too arrow down to complete the message that I’m reading.  I do have the reading pane turned off.  My question here is that, is there a setting that I need too change, and if so what is it, and how to I go about making that change.  Sometimes, I also get a message that says block quote, or block quote end before the   I’m able too start reading a message.            


moderated Re: Outlook cuts off some of the words on a line.

Richard Turner <richardturner42@...>
 

First, make sure the window is Maximized. 
Jaws substitutes the html code for a blockquote, with the words for some very confusing reason.
Are you reading line by line, or with Say All?
I have the same setup and have not experienced the cut off words.
Also, make sure there isn't another program open with a dialog that could be overlapping somehow.
Those are my best guesses.



Richard 
"Great minds discuss ideas, average minds discuss events, small minds discuss people." -- Eleanor Roosevelt

www.turner42.com


On Jul 10, 2021, at 4:11 PM, Albert Cutolo <Albertc51@...> wrote:



Good evening everyone, 

 

It seems that whenever I’m reading messages that are open in outlook with office 365, and latest jaws 2021, some of the words in a line that’s being supposed to be read, it seems that some of the words get cut off  and I have too arrow down to complete the message that I’m reading.  I do have the reading pane turned off.  My question here is that, is there a setting that I need too change, and if so what is it, and how to I go about making that change.  Sometimes, I also get a message that says block quote, or block quote end before the   I’m able too start reading a message.            


moderated Outlook cuts off some of the words on a line.

Albert Cutolo
 

Good evening everyone, 

 

It seems that whenever I’m reading messages that are open in outlook with office 365, and latest jaws 2021, some of the words in a line that’s being supposed to be read, it seems that some of the words get cut off  and I have too arrow down to complete the message that I’m reading.  I do have the reading pane turned off.  My question here is that, is there a setting that I need too change, and if so what is it, and how to I go about making that change.  Sometimes, I also get a message that says block quote, or block quote end before the   I’m able too start reading a message.            


moderated Re: After purchasing SMA?

Sieghard Weitzel <sieghard@...>
 

I am not sure what you are ordering because as I said, apart from the odd item which comes from a seller in the States GST and PST always apply to anything I order unless it is, for some reason, tax exempt like maybe some food staples and so on.

And your message definitely very much sounded like you were saying a prime membership would get you items tax-free, you wrote:

 

I have a prime membership which pretty much makes paying taxes on purchases a non issue.  No taxes are paid or shipping for that matter

 

The shipping part of course is clear and is outlined exactly on the Amazon Canada page where all the benefits are explained, but there is nothing which indicates that a prime membership " makes paying taxes on purchases a non issue":

https://www.amazon.ca/gp/help/customer/display.html/ref=vnid_G6LDPN7YJHYKH2J6?nodeId=G6LDPN7YJHYKH2J6

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Diamond
Sent: Friday, July 9, 2021 3:20 PM
To: main@jfw.groups.io
Subject: Re: After purchasing SMA?

 

Sieghard , I was not implying or meaning to imply that a Amazon prime membership allowed you not to pay taxes.  Jus, I rarely have had to pay provincial or HST on any products I’ve purchased from Amazon. When ones purchases exceed $100 frequently, 12% taxes is $12 in taxes. That adds up.    

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: July 9, 2021 7:50 AM
To: main@jfw.groups.io
Subject: Re: After purchasing SMA?

 

Hi David,

 

I'm sorry, but what gives you the idea that an Amazon Prime membership means Amazon doesn't have to charge you taxes? I order a fair bit from Amazon since I live in a very small town where I often can't find the same selection as you get in the big city and I have a personal Amazon account with a prime membership as well as an Amazon business account with Amazon Business Prime and except in a few cases where the item comes from a seller outside of Canada and it is not veryt expensive 5% GST and 7% PST (I live in British Columbia) are always applied to every purchase.

 

Best regards,

Sieghard

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Diamond
Sent: Wednesday, July 7, 2021 10:14 AM
To: main@jfw.groups.io
Subject: Re: After purchasing SMA?

 

Well, I had no idea sales tax was applied to the SMA in the United States.  In Canada if you can prove you have a vision problem, registered with the CNIB (Canadian National Institute for the Blind) you are tax exempt from the purchase of the SMA.  As for Amazon, although not related, I have a prime membership which pretty much makes paying taxes on purchases a non issue.  No taxes are paid or shipping for that matter unless I don’t listen to the prompt of shipping costs.  There are times where the shipping cost is more then the actual item. 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of leonard morris
Sent: July 7, 2021 10:00 AM
To: main@jfw.groups.io
Subject: Re: After purchasing SMA?

 

I believe they are physically located in Florida. However, this does not matter. My zipcode is in Sacramento therefore I pay sales tax there. Amazon is out of Seattle I think but again I have to pay sales tax according to my zipcode. The state of Oregon has no sales tax so no taxes on purchased items unless they have a law for Internet purchased products.  

 

Every country has an identity, history, custom, and culture. It’s a unique landscape in determining how its people Live, work, and play.


From: main@jfw.groups.io <main@jfw.groups.io> on behalf of Mario <mrb620@...>
Sent: Thursday, July 8, 2021 12:40:31 AM
To: main@jfw.groups.io <main@jfw.groups.io>
Subject: Re: After purchasing SMA?

 

maybe I'm not getting it, but the issue for me is FS doesn't have a
physical presence in New York, so why am I being charged sales tax?

-------- Original Message --------
From: Alan Lemly [mailto:walemly@...]
Subject: After purchasing SMA?
Date: Wednesday, July 7, 2021, 11:43 AM
To: <main@jfw.groups.io>
Mario,

The application of sales tax is a function of where you reside and your
state’s laws regarding whether sales tax applies to computer software
and its various forms. If your state applies sales tax to software and
Freedom Scientific has a physical presence in your state, Freedom
Scientific is obligated to collect sales tax and remit it to the state.
The sales tax should be calculated on the discounted price of the
software or SMA.

Like other tax laws, application of sales tax is an ever changing
situation. So, just because it did not apply in the past, doesn’t mean
it won’t in the future.

Alan Lemly

*From:* main@jfw.groups.io <main@jfw.groups.io> *On Behalf Of *Shirley Tracy
*Sent:* Wednesday, July 7, 2021 9:22 AM
*To:* main@jfw.groups.io
*Subject:* Re: After purchasing SMA?

Did you order online? I had to call in and they are refunding me the
over charge.

HTH.

Shirley Tracy

*From: *Mario <mailto:mrb620@...>
*Sent: *Wednesday, July 7, 2021 10:10 AM
*To: *main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject: *Re: After purchasing SMA?

not sure if I should complain, but before purchasing mine and applying

the 20% discount, there was sales tax added which now reduces the value

of the discount to about 12%. in previous years when I upgraded the SMA,

I never had to pay a sales tax. what should I do, let it slide or

contact Erik?

-------- Original Message --------

From: Mike B [mailto:mb69mach1@... <mailto:mb69mach1@...>]

Subject: After purchasing SMA?

Date: Tuesday, July 6, 2021, 7:44 PM

To: <main@jfw.groups.io <mailto:main@jfw.groups.io>>

Hi Loy,

I updated my SMA to 2023 & 2024 over the weekend and today I got a

message to update my authorization when J2021 started.  I got this

authorization update message for each computer, so you'll probably

getting the same message pretty soon.

Stay safe & take care.  Mike.

Just once, I want a username and password prompt to say:  "Close Enough!"

----- Original Message -----

*From:* Loy <mailto:loyrg2845@... <mailto:loyrg2845@...>>

*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<mailto:main@jfw.groups.io <mailto:main@jfw.groups.io>>

*Sent:* Tuesday, July 06, 2021 6:45 AM

*Subject:* After purchasing SMA?

After purchasing a SMA, how do I get it to show  the new amount of

upgrades I have.





moderated Re: Can I get anyone to access this website? Postand Courier.com Jaws2021

Sieghard Weitzel <sieghard@...>
 

There are certain days, July 4, July 6, July 8 (I didn't check previous dates) where the headings for the counties are not there.

But apart from that I had no problem with Jaws 2021 and Edge, each day/date is a heading level 3 which is also a link, Jaws did read one name for some of the dates if you didn't actually go into the details for that date, but apart from that pressing enter on the heading/link opened it up and as I said, on some days you can then use Heading Level 1 to go to the beginning of the section and heading level 3 to go to the different counties, from there simple arrow down and it reads the names.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of O.Addison Gethers
Sent: Friday, July 9, 2021 4:41 PM
To: main@jfw.groups.io
Subject: Re: Can I get anyone to access this website? Postand Courier.com Jaws2021

 

Richard

I didn’t have any problem  2 weeks ago on desktop  when it was working on edge and firefox  to read the 2nd page  and on laptop  it read on chrome,edge and firefox  but on Friday ,June 18  and Saturday ,June 19th  it was not working on chrome in desktop  so I called microsoft disability support  to asked them to turns off the banners  but the lady support  messed up the 2nd page  and got edge and firefox  messed up when she trying to get chrome to be like on edge and firefox  but she got the 2nd page of deaths summary  in chrome  in edge and firefox  that’s why jaws not read to say Charleston  County .

Do you know how can I do the cooking setting  in chrome ,edge and firefox ?

Addison

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Friday, July 09, 2021 7:03 PM
To: main@jfw.groups.io
Subject: Re: Can I get anyone to access this website? Postand Courier.com Jaws2021

 

When I followed the link for the Death summary for Friday, July 9th.

The line below the heading on that next page was a listing for:

DANTZLER, Thomasener, Summerville

That was the only one listed.

If you hit the next link, it took you to Thursday, where there was one listing, then the next link took you to Wednesday where there was one listing….

 

Perhaps to get full access you actually do need a subscription or at least an account.

 

Since they have a subscription option; my guess is to get full details, you need an account.

 

Perhaps you could simply call them to find out.

 

 

 

Richard

Software means never having to say you're finished

 

Web site: www.turner42.com

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of O.Addison Gethers
Sent: Friday, July 9, 2021 3:09 PM
To: blindtech@groups.io
Subject: Can I get anyone to access this website? Postand Courier.com Jaws2021

 

Hi All

I’m using desktop and laptop  computer windows10  and jaws2021 !! Can I ask anyone to access this website  for me to tell me if yours jaws reading ?  Here is the  links  below

https://www.postandcourier.com/news/obituaries/

 

 

 

When I’m on first page  I press enter on article  Deaths summary for Friday<July 9th 2021  then next  page  there is the list that say Charleston  County  with deceased name ,age,died and funeral home name  and etc  because my jaws read to say deaths summary for Thursday<July 8th 2021  and said  deaths summary for Friday,July 9th 2021  then said subscribe  after it say that  it suppose to say Charleston County  with deceased name age and funeral home  but jaws not saying that on the page. You and I do not have to subscribe  or log in account at all.

Here is example  of 2nd page on death summary for Saturday<July 3rd 2021

This is from  Saturday,July 3rdnd 2021where I was trying to explaining to yours support  how the 2nd page  on deaths summary  after click or enter  on the first page  on deaths Summary for Saturday,July 3rd2021   where on 2nd page  should have 

Deaths summary for Friday,July 2nd 2021 then  will said deaths summary for Saturday,July 3rd 2021 then it will have subscribe  then it will have this  below

Maybe the site was being worked on. Probably not though. Here’s what I copied an pasted from the page you said to go to:

Charleston County

ACKERMAN, Bessie, 79, of Charleston died Friday. Arrangements by Stuhr’s West Ashley Chapel.

MOSES, Elizabeth, 67, of Charleston died Friday. Arrangements by Low Country Mortuary of North Charleston.

PATRICK, Hamidatu Fatmata Ravenel, 33, of Charleston died Thursday. Arrangements by Stuhr’s Downtown Chapel.

WEATHERFORD, Herbert Bryan Jr., 89, of Ravenel died Thursday. Arrangements by Brice Herndon’s Walterboro Chapel.

Berkeley County

LEWIS, Harvey Lee, 88, of Hanahan died Thursday. Arrangements by Stuhr’s Northwoods Chapel of North Charleston.

YOUNG, Nancy, 68, of Goose Creek died Thursday. Arrangements by Simplicity Lowcountry Cremation and Burial Services’ Summerville Chapel.

Colleton County

GANT, Ron A., 54, of Walterboro died Friday. Arrangements by Harold Frazier Mortuary.

Dorchester County

GIACONA, Frank James, 68, of Summerville died Monday. Arrangements by Simplicity Lowcountry Cremation and Burial Services’ Ladson Chapel.

Elsewhere

BEHR, Earl Eugene, 91, of Holly Hill died Thursday. Arrangements by Avinger Funeral Home.

BREWER, Stephanie Michelle, 39, of Rutherfordton, N.C. died June 23. Arrangements by Crowes Mortuary.

BROWN, Clarence Jr., 71, of Baltimore died Wednesday. Arrangements by Murray’s Mortuary of North Charleston, S.C.

CUNNINGHAM, Quay Hakeem, 28, of Kingstree died June 27. Arrangements by Henryhand’s Lake City Chapel.

DUGGINS, Dora T., 93, of Knightdale, N.C., formerly of Ridgeville, S.C., died Tuesday. Arrangements by The Serenity Mortuary of Summerville, S.C.

 

 

Does your computer show that now?

 

 

 

Addison

 


moderated Re: Questions re Logitech G815 keyboard

Marie <scribbles.mn@...>
 

    Thanks for the recommendation. I had been leaving the keyboard sealed in the box so if I decided to return it to Best Buy, they could put it back on the shelf since it would indeed still be in “new” condition. But as I could not find the answers I was seeking, I pulled it out, plugged it in and I want to say that I am delighted with it. It does have the context key which I love and all the F keys are functioning as normal function keys and there is no FN key whatsoever. In Addition the G keys to the left side are set as f1 f2 f3 f4 and f5 for quick and easy access. The gaming keys are placed above the function keys and just above the numpad, there are four small keys which I believe are media keys.
The keys are only half the height of the regular mechanical keys and that works better for me since my hands are pretty small and I like the lighter touch. There is just enough click to make it nice.
It was $169 at Best Buy.
Marie
 
 
 

From: Sieghard Weitzel
Sent: Friday, July 9, 2021 8:39 AM
To: main@jfw.groups.io
Subject: Re: Questions re Logitech G815 keyboard
 

Since this is a wired keyboard I assume you are not looking for a wireless one and in this case I would highly recommend the Das Keyboard Professional 4 wired mechanical keyboard. You can get it with very tactile clicky Blue switches which to some may seem noisy, I find them just fine and very satisfying and I definitely prefer them over the Brown switches which are quieter and don't have the positive feedback.

This is a no-nonsense beautifully crafted keyboard made from aluminum with 2 USB 3.0 ports on the back, a very nice and large volume knob and basic buttons for mute, Play/Pause and rewind and forward as well as a dedicated Sleep button which is, however, very flush and hard to find at first.

What I like is the fact that it has a very traditional 104-key, IBM style keyboard layout with the 12 function keys with large gaps between F4 and F5 and F8 and F9, a very traditional 6-pack and cursor key T and that's it. No extra gaming keys and the function keys all work as they should out of the box and it's truly a plug and play keyboard with no software installation required, but it has updatable firmware.

It has a Windows key on either side of the spacebar as well as an application key and the usual tactile dot on the F and J keys. The F and J dots on my keyboards have worn off quite a bit, but you can get replacement key caps from them as well.

Here is the link to their website:

 

https://www.daskeyboard.com/daskeyboard-4-professional/

 

Best regards,

Sieghard

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marie
Sent: Friday, July 9, 2021 6:53 AM
To: main@jfw.groups.io
Subject: Re: Questions re Logitech G815 keyboard

 

Yes, but neither of my questions was answered there.

M

.

 

 

From: Richard Turner

Sent: Wednesday, July 7, 2021 10:52 AM

To: main@jfw.groups.io

Subject: Re: Questions re Logitech G815 keyboard

 

Did you read the details on the Logitech web site for this gaming keyboard:

Logitech G815 LIGHTSYNC RGB Mechanical Gaming Keyboard

 

You might call their Logitech Audio Group office at: +1 360-817-1200

 

 

Richard

Software means never having to say you're finished

 

Web site: www.turner42.com

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marie
Sent: Wednesday, July 7, 2021 10:34 AM
To: jfw@groups.io
Subject: Questions re Logitech G815 keyboard

 

If anyone has experience with this keyboard, I have a couple of questions. First, does it have the context key and second, are the F keys set as function keys or as hardware keys?

Thanks for any help,

Marie

 

I'm a multitasker. I can listen, ignore and forget all at the same time!


moderated Re: Can I get anyone to access this website? Postand Courier.com Jaws2021

O.Addison Gethers
 

Richard

I didn’t have any problem  2 weeks ago on desktop  when it was working on edge and firefox  to read the 2nd page  and on laptop  it read on chrome,edge and firefox  but on Friday ,June 18  and Saturday ,June 19th  it was not working on chrome in desktop  so I called microsoft disability support  to asked them to turns off the banners  but the lady support  messed up the 2nd page  and got edge and firefox  messed up when she trying to get chrome to be like on edge and firefox  but she got the 2nd page of deaths summary  in chrome  in edge and firefox  that’s why jaws not read to say Charleston  County .

Do you know how can I do the cooking setting  in chrome ,edge and firefox ?

Addison

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Friday, July 09, 2021 7:03 PM
To: main@jfw.groups.io
Subject: Re: Can I get anyone to access this website? Postand Courier.com Jaws2021

 

When I followed the link for the Death summary for Friday, July 9th.

The line below the heading on that next page was a listing for:

DANTZLER, Thomasener, Summerville

That was the only one listed.

If you hit the next link, it took you to Thursday, where there was one listing, then the next link took you to Wednesday where there was one listing….

 

Perhaps to get full access you actually do need a subscription or at least an account.

 

Since they have a subscription option; my guess is to get full details, you need an account.

 

Perhaps you could simply call them to find out.

 

 

 

Richard

Software means never having to say you're finished

 

Web site: www.turner42.com

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of O.Addison Gethers
Sent: Friday, July 9, 2021 3:09 PM
To: blindtech@groups.io
Subject: Can I get anyone to access this website? Postand Courier.com Jaws2021

 

Hi All

I’m using desktop and laptop  computer windows10  and jaws2021 !! Can I ask anyone to access this website  for me to tell me if yours jaws reading ?  Here is the  links  below

https://www.postandcourier.com/news/obituaries/

 

 

 

When I’m on first page  I press enter on article  Deaths summary for Friday<July 9th 2021  then next  page  there is the list that say Charleston  County  with deceased name ,age,died and funeral home name  and etc  because my jaws read to say deaths summary for Thursday<July 8th 2021  and said  deaths summary for Friday,July 9th 2021  then said subscribe  after it say that  it suppose to say Charleston County  with deceased name age and funeral home  but jaws not saying that on the page. You and I do not have to subscribe  or log in account at all.

Here is example  of 2nd page on death summary for Saturday<July 3rd 2021

This is from  Saturday,July 3rdnd 2021where I was trying to explaining to yours support  how the 2nd page  on deaths summary  after click or enter  on the first page  on deaths Summary for Saturday,July 3rd2021   where on 2nd page  should have 

Deaths summary for Friday,July 2nd 2021 then  will said deaths summary for Saturday,July 3rd 2021 then it will have subscribe  then it will have this  below

Maybe the site was being worked on. Probably not though. Here’s what I copied an pasted from the page you said to go to:

Charleston County

ACKERMAN, Bessie, 79, of Charleston died Friday. Arrangements by Stuhr’s West Ashley Chapel.

MOSES, Elizabeth, 67, of Charleston died Friday. Arrangements by Low Country Mortuary of North Charleston.

PATRICK, Hamidatu Fatmata Ravenel, 33, of Charleston died Thursday. Arrangements by Stuhr’s Downtown Chapel.

WEATHERFORD, Herbert Bryan Jr., 89, of Ravenel died Thursday. Arrangements by Brice Herndon’s Walterboro Chapel.

Berkeley County

LEWIS, Harvey Lee, 88, of Hanahan died Thursday. Arrangements by Stuhr’s Northwoods Chapel of North Charleston.

YOUNG, Nancy, 68, of Goose Creek died Thursday. Arrangements by Simplicity Lowcountry Cremation and Burial Services’ Summerville Chapel.

Colleton County

GANT, Ron A., 54, of Walterboro died Friday. Arrangements by Harold Frazier Mortuary.

Dorchester County

GIACONA, Frank James, 68, of Summerville died Monday. Arrangements by Simplicity Lowcountry Cremation and Burial Services’ Ladson Chapel.

Elsewhere

BEHR, Earl Eugene, 91, of Holly Hill died Thursday. Arrangements by Avinger Funeral Home.

BREWER, Stephanie Michelle, 39, of Rutherfordton, N.C. died June 23. Arrangements by Crowes Mortuary.

BROWN, Clarence Jr., 71, of Baltimore died Wednesday. Arrangements by Murray’s Mortuary of North Charleston, S.C.

CUNNINGHAM, Quay Hakeem, 28, of Kingstree died June 27. Arrangements by Henryhand’s Lake City Chapel.

DUGGINS, Dora T., 93, of Knightdale, N.C., formerly of Ridgeville, S.C., died Tuesday. Arrangements by The Serenity Mortuary of Summerville, S.C.

 

 

Does your computer show that now?

 

 

 

Addison

 


moderated Re: Can I get anyone to access this website? Postand Courier.com Jaws2021

Richard Turner <richardturner42@...>
 

Good catch.

I followed his steps to use the summary link.

You followed the link before that which obviously gets more information.

 

 

 

Richard

Software means never having to say you're finished

 

Web site: www.turner42.com

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of N K Shackelford
Sent: Friday, July 9, 2021 4:03 PM
To: main@jfw.groups.io
Subject: Re: Can I get anyone to access this website? Postand Courier.com Jaws2021

 

Here’s what the part of the page we’re discussing looks like to me with NVDA after I hit Enter on “Deaths and Funerals for Friday, July 9, 2021.”

 

Deaths and Funerals for Friday, July 9, 2021

18 hrs ago

Subscribe today for $4 for 4 months

DANTZLER, Thomasener, Summerville

DAY, Betty, Moncks Corner

DILIBERTO, Sheri, Summerville

FRANZ, Ryan, Charleston

JOHNSON, Roosevelt, Orangeburg

LLOYD, Arthur, Charleston

MACK, Phyllis, North Charleston

 

Now, you’ll see another thing you can do, a search, but just skip over these few lines about that, and you will see some more names.

SEARCH ANYONE BY TYPING THEIR NAME

3 Steps Only:

[ 1 ] Enter Name

[ 2 ] Press Search

[ 3 ] Get Report

First Name

 

Last Name

 

Start Search

BeenVerified

Getting description…

 

MANIGAULT, Edward Jr., Charleston

MILLER, David, Charleston

SCOTT, Alvin Jr., North Charleston

SHANK, Anissa, Moncks Corner

SMITH, Juanita, North Charleston

WILLIAMS, Floyd, North Charleston

Today’s Top Headlines

 

I have Chrome set to where it tries to get a description of pictures, so that’s why you read, “Getting description…”

 

HTH,

Nance

N K Shackelford

===Walk on Faith And Trust In Love=== Michael Reid

 


moderated Re: Can I get anyone to access this website? Postand Courier.com Jaws2021

N K Shackelford
 

Here’s what the part of the page we’re discussing looks like to me with NVDA after I hit Enter on “Deaths and Funerals for Friday, July 9, 2021.”

 

Deaths and Funerals for Friday, July 9, 2021

18 hrs ago

Subscribe today for $4 for 4 months

DANTZLER, Thomasener, Summerville

DAY, Betty, Moncks Corner

DILIBERTO, Sheri, Summerville

FRANZ, Ryan, Charleston

JOHNSON, Roosevelt, Orangeburg

LLOYD, Arthur, Charleston

MACK, Phyllis, North Charleston

 

Now, you’ll see another thing you can do, a search, but just skip over these few lines about that, and you will see some more names.

SEARCH ANYONE BY TYPING THEIR NAME

3 Steps Only:

[ 1 ] Enter Name

[ 2 ] Press Search

[ 3 ] Get Report

First Name

Last Name

Start Search

BeenVerified

Getting description…

 

MANIGAULT, Edward Jr., Charleston

MILLER, David, Charleston

SCOTT, Alvin Jr., North Charleston

SHANK, Anissa, Moncks Corner

SMITH, Juanita, North Charleston

WILLIAMS, Floyd, North Charleston

Today’s Top Headlines

 

I have Chrome set to where it tries to get a description of pictures, so that’s why you read, “Getting description…”

 

HTH,

Nance

N K Shackelford

===Walk on Faith And Trust In Love=== Michael Reid

 


moderated Re: Can I get anyone to access this website? Postand Courier.com Jaws2021

Richard Turner <richardturner42@...>
 

When I followed the link for the Death summary for Friday, July 9th.

The line below the heading on that next page was a listing for:

DANTZLER, Thomasener, Summerville

That was the only one listed.

If you hit the next link, it took you to Thursday, where there was one listing, then the next link took you to Wednesday where there was one listing….

 

Perhaps to get full access you actually do need a subscription or at least an account.

 

Since they have a subscription option; my guess is to get full details, you need an account.

 

Perhaps you could simply call them to find out.

 

 

 

Richard

Software means never having to say you're finished

 

Web site: www.turner42.com

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of O.Addison Gethers
Sent: Friday, July 9, 2021 3:09 PM
To: blindtech@groups.io
Subject: Can I get anyone to access this website? Postand Courier.com Jaws2021

 

Hi All

I’m using desktop and laptop  computer windows10  and jaws2021 !! Can I ask anyone to access this website  for me to tell me if yours jaws reading ?  Here is the  links  below

https://www.postandcourier.com/news/obituaries/

 

 

 

When I’m on first page  I press enter on article  Deaths summary for Friday<July 9th 2021  then next  page  there is the list that say Charleston  County  with deceased name ,age,died and funeral home name  and etc  because my jaws read to say deaths summary for Thursday<July 8th 2021  and said  deaths summary for Friday,July 9th 2021  then said subscribe  after it say that  it suppose to say Charleston County  with deceased name age and funeral home  but jaws not saying that on the page. You and I do not have to subscribe  or log in account at all.

Here is example  of 2nd page on death summary for Saturday<July 3rd 2021

This is from  Saturday,July 3rdnd 2021where I was trying to explaining to yours support  how the 2nd page  on deaths summary  after click or enter  on the first page  on deaths Summary for Saturday,July 3rd2021   where on 2nd page  should have 

Deaths summary for Friday,July 2nd 2021 then  will said deaths summary for Saturday,July 3rd 2021 then it will have subscribe  then it will have this  below

Maybe the site was being worked on. Probably not though. Here’s what I copied an pasted from the page you said to go to:

Charleston County

ACKERMAN, Bessie, 79, of Charleston died Friday. Arrangements by Stuhr’s West Ashley Chapel.

MOSES, Elizabeth, 67, of Charleston died Friday. Arrangements by Low Country Mortuary of North Charleston.

PATRICK, Hamidatu Fatmata Ravenel, 33, of Charleston died Thursday. Arrangements by Stuhr’s Downtown Chapel.

WEATHERFORD, Herbert Bryan Jr., 89, of Ravenel died Thursday. Arrangements by Brice Herndon’s Walterboro Chapel.

Berkeley County

LEWIS, Harvey Lee, 88, of Hanahan died Thursday. Arrangements by Stuhr’s Northwoods Chapel of North Charleston.

YOUNG, Nancy, 68, of Goose Creek died Thursday. Arrangements by Simplicity Lowcountry Cremation and Burial Services’ Summerville Chapel.

Colleton County

GANT, Ron A., 54, of Walterboro died Friday. Arrangements by Harold Frazier Mortuary.

Dorchester County

GIACONA, Frank James, 68, of Summerville died Monday. Arrangements by Simplicity Lowcountry Cremation and Burial Services’ Ladson Chapel.

Elsewhere

BEHR, Earl Eugene, 91, of Holly Hill died Thursday. Arrangements by Avinger Funeral Home.

BREWER, Stephanie Michelle, 39, of Rutherfordton, N.C. died June 23. Arrangements by Crowes Mortuary.

BROWN, Clarence Jr., 71, of Baltimore died Wednesday. Arrangements by Murray’s Mortuary of North Charleston, S.C.

CUNNINGHAM, Quay Hakeem, 28, of Kingstree died June 27. Arrangements by Henryhand’s Lake City Chapel.

DUGGINS, Dora T., 93, of Knightdale, N.C., formerly of Ridgeville, S.C., died Tuesday. Arrangements by The Serenity Mortuary of Summerville, S.C.

 

 

Does your computer show that now?

 

 

 

Addison

 


moderated Re: Can I get anyone to access this website? Postand Courier.com Jaws2021

Madison Martin
 

I had trouble as well, but I find I have trouble with newspapers in general.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of O.Addison Gethers
Sent: July 9, 2021 5:09 PM
To: blindtech@groups.io
Subject: Can I get anyone to access this website? Postand Courier.com Jaws2021

 

Hi All

I’m using desktop and laptop  computer windows10  and jaws2021 !! Can I ask anyone to access this website  for me to tell me if yours jaws reading ?  Here is the  links  below

https://www.postandcourier.com/news/obituaries/

 

 

 

When I’m on first page  I press enter on article  Deaths summary for Friday<July 9th 2021  then next  page  there is the list that say Charleston  County  with deceased name ,age,died and funeral home name  and etc  because my jaws read to say deaths summary for Thursday<July 8th 2021  and said  deaths summary for Friday,July 9th 2021  then said subscribe  after it say that  it suppose to say Charleston County  with deceased name age and funeral home  but jaws not saying that on the page. You and I do not have to subscribe  or log in account at all.

Here is example  of 2nd page on death summary for Saturday<July 3rd 2021

This is from  Saturday,July 3rdnd 2021where I was trying to explaining to yours support  how the 2nd page  on deaths summary  after click or enter  on the first page  on deaths Summary for Saturday,July 3rd2021   where on 2nd page  should have 

Deaths summary for Friday,July 2nd 2021 then  will said deaths summary for Saturday,July 3rd 2021 then it will have subscribe  then it will have this  below

Maybe the site was being worked on. Probably not though. Here’s what I copied an pasted from the page you said to go to:

Charleston County

ACKERMAN, Bessie, 79, of Charleston died Friday. Arrangements by Stuhr’s West Ashley Chapel.

MOSES, Elizabeth, 67, of Charleston died Friday. Arrangements by Low Country Mortuary of North Charleston.

PATRICK, Hamidatu Fatmata Ravenel, 33, of Charleston died Thursday. Arrangements by Stuhr’s Downtown Chapel.

WEATHERFORD, Herbert Bryan Jr., 89, of Ravenel died Thursday. Arrangements by Brice Herndon’s Walterboro Chapel.

Berkeley County

LEWIS, Harvey Lee, 88, of Hanahan died Thursday. Arrangements by Stuhr’s Northwoods Chapel of North Charleston.

YOUNG, Nancy, 68, of Goose Creek died Thursday. Arrangements by Simplicity Lowcountry Cremation and Burial Services’ Summerville Chapel.

Colleton County

GANT, Ron A., 54, of Walterboro died Friday. Arrangements by Harold Frazier Mortuary.

Dorchester County

GIACONA, Frank James, 68, of Summerville died Monday. Arrangements by Simplicity Lowcountry Cremation and Burial Services’ Ladson Chapel.

Elsewhere

BEHR, Earl Eugene, 91, of Holly Hill died Thursday. Arrangements by Avinger Funeral Home.

BREWER, Stephanie Michelle, 39, of Rutherfordton, N.C. died June 23. Arrangements by Crowes Mortuary.

BROWN, Clarence Jr., 71, of Baltimore died Wednesday. Arrangements by Murray’s Mortuary of North Charleston, S.C.

CUNNINGHAM, Quay Hakeem, 28, of Kingstree died June 27. Arrangements by Henryhand’s Lake City Chapel.

DUGGINS, Dora T., 93, of Knightdale, N.C., formerly of Ridgeville, S.C., died Tuesday. Arrangements by The Serenity Mortuary of Summerville, S.C.

 

 

Does your computer show that now?

 

 

 

Addison

 


moderated Re: After purchasing SMA?

David Diamond
 

Sieghard , I was not implying or meaning to imply that a Amazon prime membership allowed you not to pay taxes.  Jus, I rarely have had to pay provincial or HST on any products I’ve purchased from Amazon. When ones purchases exceed $100 frequently, 12% taxes is $12 in taxes. That adds up.    

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: July 9, 2021 7:50 AM
To: main@jfw.groups.io
Subject: Re: After purchasing SMA?

 

Hi David,

 

I'm sorry, but what gives you the idea that an Amazon Prime membership means Amazon doesn't have to charge you taxes? I order a fair bit from Amazon since I live in a very small town where I often can't find the same selection as you get in the big city and I have a personal Amazon account with a prime membership as well as an Amazon business account with Amazon Business Prime and except in a few cases where the item comes from a seller outside of Canada and it is not veryt expensive 5% GST and 7% PST (I live in British Columbia) are always applied to every purchase.

 

Best regards,

Sieghard

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Diamond
Sent: Wednesday, July 7, 2021 10:14 AM
To: main@jfw.groups.io
Subject: Re: After purchasing SMA?

 

Well, I had no idea sales tax was applied to the SMA in the United States.  In Canada if you can prove you have a vision problem, registered with the CNIB (Canadian National Institute for the Blind) you are tax exempt from the purchase of the SMA.  As for Amazon, although not related, I have a prime membership which pretty much makes paying taxes on purchases a non issue.  No taxes are paid or shipping for that matter unless I don’t listen to the prompt of shipping costs.  There are times where the shipping cost is more then the actual item. 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of leonard morris
Sent: July 7, 2021 10:00 AM
To: main@jfw.groups.io
Subject: Re: After purchasing SMA?

 

I believe they are physically located in Florida. However, this does not matter. My zipcode is in Sacramento therefore I pay sales tax there. Amazon is out of Seattle I think but again I have to pay sales tax according to my zipcode. The state of Oregon has no sales tax so no taxes on purchased items unless they have a law for Internet purchased products.  

 

Every country has an identity, history, custom, and culture. It’s a unique landscape in determining how its people Live, work, and play.


From: main@jfw.groups.io <main@jfw.groups.io> on behalf of Mario <mrb620@...>
Sent: Thursday, July 8, 2021 12:40:31 AM
To: main@jfw.groups.io <main@jfw.groups.io>
Subject: Re: After purchasing SMA?

 

maybe I'm not getting it, but the issue for me is FS doesn't have a
physical presence in New York, so why am I being charged sales tax?

-------- Original Message --------
From: Alan Lemly [mailto:walemly@...]
Subject: After purchasing SMA?
Date: Wednesday, July 7, 2021, 11:43 AM
To: <main@jfw.groups.io>
Mario,

The application of sales tax is a function of where you reside and your
state’s laws regarding whether sales tax applies to computer software
and its various forms. If your state applies sales tax to software and
Freedom Scientific has a physical presence in your state, Freedom
Scientific is obligated to collect sales tax and remit it to the state.
The sales tax should be calculated on the discounted price of the
software or SMA.

Like other tax laws, application of sales tax is an ever changing
situation. So, just because it did not apply in the past, doesn’t mean
it won’t in the future.

Alan Lemly

*From:* main@jfw.groups.io <main@jfw.groups.io> *On Behalf Of *Shirley Tracy
*Sent:* Wednesday, July 7, 2021 9:22 AM
*To:* main@jfw.groups.io
*Subject:* Re: After purchasing SMA?

Did you order online? I had to call in and they are refunding me the
over charge.

HTH.

Shirley Tracy

*From: *Mario <mailto:mrb620@...>
*Sent: *Wednesday, July 7, 2021 10:10 AM
*To: *main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject: *Re: After purchasing SMA?

not sure if I should complain, but before purchasing mine and applying

the 20% discount, there was sales tax added which now reduces the value

of the discount to about 12%. in previous years when I upgraded the SMA,

I never had to pay a sales tax. what should I do, let it slide or

contact Erik?

-------- Original Message --------

From: Mike B [mailto:mb69mach1@... <mailto:mb69mach1@...>]

Subject: After purchasing SMA?

Date: Tuesday, July 6, 2021, 7:44 PM

To: <main@jfw.groups.io <mailto:main@jfw.groups.io>>

Hi Loy,

I updated my SMA to 2023 & 2024 over the weekend and today I got a

message to update my authorization when J2021 started.  I got this

authorization update message for each computer, so you'll probably

getting the same message pretty soon.

Stay safe & take care.  Mike.

Just once, I want a username and password prompt to say:  "Close Enough!"

----- Original Message -----

*From:* Loy <mailto:loyrg2845@... <mailto:loyrg2845@...>>

*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<mailto:main@jfw.groups.io <mailto:main@jfw.groups.io>>

*Sent:* Tuesday, July 06, 2021 6:45 AM

*Subject:* After purchasing SMA?

After purchasing a SMA, how do I get it to show  the new amount of

upgrades I have.





3301 - 3320 of 93984