Date   

Re: "Fast Startup" sound akin to Startup Sound, could we get one?

Jeremy <jeremy.richards7@...>
 

I have a bit of a high-end computer, and I definitely notice a difference when Fast boot is on or off. I can come in and out of shutdown in about as  long as it takes me to lift the lid on my laptop with fast boot on as opposed to about 35 seconds with fast boot off. This feature is also very reliable and stable--I can go for weeks without a restart. I don’t think Microsoft would have spent so much in R&D for this feature to not notice a difference in boot time.  

 

JR

  

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Alan Robbins via Groups.Io
Sent: Friday, August 24, 2018 3:39 AM
To: main@jfw.groups.io
Subject: Re: "Fast Startup" sound akin to Startup Sound, could we get one?

 

Agreed, if using a traditional mechanical drive. However, if one is using the new solid-state drive the increased time saved is not worth any possible inconvenience. I keep this turned off and all my solid-state drive computers and see virtually no difference in time whether it is enabled or not.


On Aug 24, 2018, at 4:43 AM, Jeremy <jeremy.richards7@...> wrote:

I disagree. Fast Startup is a very useful time-saving feature of Windows. I use it on all my computers, and I’ve never experienced corruption.

 

JR

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Steve Nutt
Sent: Friday, August 24, 2018 1:39 AM
To: main@jfw.groups.io
Subject: Re: "Fast Startup" sound akin to Startup Sound, could we get one?

 

Just turn off fast startup, it’s a pain anyway.  Often your on-disk to memory transfer gets corrupted.  It causes more grief than it helps, in my experience.

 

All the best


Steve

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Vogel
Sent: 22 August 2018 15:42
To: main@jfw.groups.io
Subject: "Fast Startup" sound akin to Startup Sound, could we get one?

 

While this is not directly JAWS related, the issue of lack of a "coming back from being shut down when using Fast Startup" sound, as well as the lack of the good, old-fashioned shutdown sound, under Windows 10 comes up repeatedly on virtually every screen reader related group I'm participating in.  

I have just created feedback related to both, and here's the click-through link to the Windows 10 Feedback Hub for it (which, of course, only works for Windows 10 users):

               "Fast Startup" sound akin to Startup Sound, could we get one?

If this is an accessibility issue for you, please review this feedback and upvote it so that it will garner more attention.
--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

    The real art of conversation is not only to say the right thing in the right place but to leave unsaid the wrong thing at the tempting moment.

          ~ Dorothy Nevill


Re: Latest Skype and Jaws 2018

inamuddin khan
 

Dear, I’m very sorry to let you know that the latest Skype is not accessible in system tray.

Why don’t you give feedback to Microsoft by pressing ctrl+o?

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

 

You can contact me via gmail:
inamuddin09@...

Inamuddin.ronaque@...

outlook:
inam092@...

yahoo:
inamuddin2010@...

Add my Skype ID:
charlsdarwin1
Meet me on facebook:
www.facebook.com/inamuddin786

Follow me on my twitter ID:
www.twitter.com/charlsdarwin1

Call me on my cell numbers:
+92-300-2227598 

+92-334-3348409

 

 

From: Jim L
Sent: Friday, August 24, 2018 9:59 AM
To: jfw@groups.io
Subject: Latest Skype and Jaws 2018

 

Heya folks,

 

Have installed the new Jaws update 2018 and latest Skype 8.2, Can anyone click on skype in the systray and access the menu list from there as we did with previous Skype version?

 

If so what is the menu list as Jaws doesn’t read it to me and I cannot cursor up or down on that list.

 

Cheers,

 

Jim

 

 


Re: "Fast Startup" sound akin to Startup Sound, could we get one?

Alan Robbins
 

Agreed, if using a traditional mechanical drive. However, if one is using the new solid-state drive the increased time saved is not worth any possible inconvenience. I keep this turned off and all my solid-state drive computers and see virtually no difference in time whether it is enabled or not.

On Aug 24, 2018, at 4:43 AM, Jeremy <jeremy.richards7@...> wrote:

I disagree. Fast Startup is a very useful time-saving feature of Windows. I use it on all my computers, and I’ve never experienced corruption.

 

JR

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Steve Nutt
Sent: Friday, August 24, 2018 1:39 AM
To: main@jfw.groups.io
Subject: Re: "Fast Startup" sound akin to Startup Sound, could we get one?

 

Just turn off fast startup, it’s a pain anyway.  Often your on-disk to memory transfer gets corrupted.  It causes more grief than it helps, in my experience.

 

All the best


Steve

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Vogel
Sent: 22 August 2018 15:42
To: main@jfw.groups.io
Subject: "Fast Startup" sound akin to Startup Sound, could we get one?

 

While this is not directly JAWS related, the issue of lack of a "coming back from being shut down when using Fast Startup" sound, as well as the lack of the good, old-fashioned shutdown sound, under Windows 10 comes up repeatedly on virtually every screen reader related group I'm participating in.  

I have just created feedback related to both, and here's the click-through link to the Windows 10 Feedback Hub for it (which, of course, only works for Windows 10 users):

               "Fast Startup" sound akin to Startup Sound, could we get one?

If this is an accessibility issue for you, please review this feedback and upvote it so that it will garner more attention.
--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

    The real art of conversation is not only to say the right thing in the right place but to leave unsaid the wrong thing at the tempting moment.

          ~ Dorothy Nevill


Re: What backup software can we use with jaws?

Jeremy <jeremy.richards7@...>
 

The problem with resetting windows is having to spend another few days rebuilding your computer to the useful state before the disaster. Using RollBackRX you're literally up and going within 3 minutes--depending on your computer hardware of course. I do agree that a reset or refresh is much better than what we had in prior versions of Windows.

JR

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Steve Nutt
Sent: Friday, August 24, 2018 1:42 AM
To: main@jfw.groups.io
Subject: Re: What backup software can we use with jaws?

Hi,

I too don't use images any more. It's so easy to reset Windows 10 PCs, so I just reset and reinstall my programs.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jeremy
Sent: 22 August 2018 19:55
To: main@jfw.groups.io
Subject: Re: What backup software can we use with jaws?

Hi all,

Regarding backup software...

I tried many of the commonly used suggestions such as Image for Windows and alike, and I found them to be more of a time consuming process than useful. Many times these system images completed just fine, but when tested for integrity, they had problems--this was especially true for my computers with SSDs. When the time to image my computer came along, the images either failed or they resulted in weird quirks such as very long boot times and alike. I'm sure many of these problems won't happen if one has a relatively simple computer configuration, but when you have tons of software titles and Windows updates installed, these imaging solutions begin having problems do to all the complexity. I ultimately gave up on imaging Windows as precious time gets eaten up when one has to manage many computers.

I found the best solution for me is RollBackRX. If anything went wrong with my computer I simply ran a previous snapshot, and I was up and going in a couple of minutes. Yes, system images have their place, but often problems with Windows can be fixed very quickly by running a previous snapshot. RollBackRX is also extremely useful for those whom test lots of software as they can install new titles, and if one is not happy with the results, simply use RollBackRX to revert the computer to a previously working state.

RollBack Rx Home | Horizon DataSys Corporation -
https://is.gd/RBg6A4

HTH

JR

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: Wednesday, August 22, 2018 7:45 AM
To: main@jfw.groups.io
Subject: Re: What backup software can we use with jaws?

Crashplan was always partially accessible, but I gave it up when they abolished the feature to send you a disk in case of a disaster and you could not really do a full system image on it and it became very slow over time.

On Wed, 22 Aug 2018 09:11:34 -0400,
Steve Nutt wrote:

Is it accessible?

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Steve
Matzura
Sent: 22 August 2018 13:33
To: main@jfw.groups.io
Subject: Re: What backup software can we use with jaws?

What about CrashPlan? It's 1.5 times the price of an annual one-terabyte Dropbox plan, but has no limits. Or none that I've been able to find.


On 8/20/2018 1:33 PM, Jeremy wrote:
That much data will likely cost you quite a bit of cash to upload to cloud storage such as OneDrive, Dropbox, Carbonite, etc., not to mention the amount of time it will take to upload the information. If you're not constantly modifying the data, then the previous cloud storage solutions will not be all that useful to you. I suggest purchasing external hard drives. I have always purchased Western Digital Black or Seagate drives and never had a problem. For data backup you will not want to skimp on quality. :) Take a look at the following drive:

Amazon.com: WD 4TB Elements Portable External Hard Drive - USB 3.0
$99
https://is.gd/HJwtP2

JR

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jed
Barton
Sent: Monday, August 20, 2018 9:09 AM
To: main@jfw.groups.io
Subject: Re: What backup software can we use with jaws?

Hey guys. So speaking of backup software, got something i wanna do.
I ahve a feeling it won't be easy.
I do a lot of work with audio and have several tb of audio, including audio projects that i can't lose. Looking for a good place to put them for safe keeping. It includes a lot of audio music beds and stuff, not for distrobution, just for safe keeping. Any ideas for a good solution for this. I've got about 8 TB worth of stuff. I know, not an easy task.

On 8/20/18, Sieghard Weitzel <sieghard@live.ca> wrote:
Steve provides the link to this backup software which, as the name
implies, backs up your files and sytem. If you click on the link
you will be able to read the following summary:

Backup Everything!
Discover the renowned backup, restore, and synchronisation software
SyncBackPro . Backup to disk, network, FTP, the Cloud, MTP, email,
Windows, Linux, macOS & Android!



Discounts & Bundles

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jed
Barton
Sent: Monday, August 20, 2018 8:53 AM
To: main@jfw.groups.io
Subject: Re: What backup software can we use with jaws?

can you tell me about this backup software, what does it do?

On 8/20/18, Steve Nutt <steve@comproom.co.uk> wrote:
Hi,

Yes, Syncback, or Syncback Pro from http://www.2brightsparks.com

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David
Ingram
Sent: 16 August 2018 03:42
To: main@jfw.groups.io
Subject: What backup software can we use with jaws?

Hi list members, does anyone know of backup software that we can
use with jaws?










--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


Re: "Fast Startup" sound akin to Startup Sound, could we get one?

Jeremy <jeremy.richards7@...>
 

I disagree. Fast Startup is a very useful time-saving feature of Windows. I use it on all my computers, and I’ve never experienced corruption.

 

JR

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Steve Nutt
Sent: Friday, August 24, 2018 1:39 AM
To: main@jfw.groups.io
Subject: Re: "Fast Startup" sound akin to Startup Sound, could we get one?

 

Just turn off fast startup, it’s a pain anyway.  Often your on-disk to memory transfer gets corrupted.  It causes more grief than it helps, in my experience.

 

All the best


Steve

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Vogel
Sent: 22 August 2018 15:42
To: main@jfw.groups.io
Subject: "Fast Startup" sound akin to Startup Sound, could we get one?

 

While this is not directly JAWS related, the issue of lack of a "coming back from being shut down when using Fast Startup" sound, as well as the lack of the good, old-fashioned shutdown sound, under Windows 10 comes up repeatedly on virtually every screen reader related group I'm participating in.  

I have just created feedback related to both, and here's the click-through link to the Windows 10 Feedback Hub for it (which, of course, only works for Windows 10 users):

               "Fast Startup" sound akin to Startup Sound, could we get one?

If this is an accessibility issue for you, please review this feedback and upvote it so that it will garner more attention.
--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

    The real art of conversation is not only to say the right thing in the right place but to leave unsaid the wrong thing at the tempting moment.

          ~ Dorothy Nevill


Re: What backup software can we use with jaws?

Steve Nutt
 

Hi,

I too don't use images any more. It's so easy to reset Windows 10 PCs, so I just reset and reinstall my programs.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jeremy
Sent: 22 August 2018 19:55
To: main@jfw.groups.io
Subject: Re: What backup software can we use with jaws?

Hi all,

Regarding backup software...

I tried many of the commonly used suggestions such as Image for Windows and alike, and I found them to be more of a time consuming process than useful. Many times these system images completed just fine, but when tested for integrity, they had problems--this was especially true for my computers with SSDs. When the time to image my computer came along, the images either failed or they resulted in weird quirks such as very long boot times and alike. I'm sure many of these problems won't happen if one has a relatively simple computer configuration, but when you have tons of software titles and Windows updates installed, these imaging solutions begin having problems do to all the complexity. I ultimately gave up on imaging Windows as precious time gets eaten up when one has to manage many computers.

I found the best solution for me is RollBackRX. If anything went wrong with my computer I simply ran a previous snapshot, and I was up and going in a couple of minutes. Yes, system images have their place, but often problems with Windows can be fixed very quickly by running a previous snapshot. RollBackRX is also extremely useful for those whom test lots of software as they can install new titles, and if one is not happy with the results, simply use RollBackRX to revert the computer to a previously working state.

RollBack Rx Home | Horizon DataSys Corporation -
https://is.gd/RBg6A4

HTH

JR

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: Wednesday, August 22, 2018 7:45 AM
To: main@jfw.groups.io
Subject: Re: What backup software can we use with jaws?

Crashplan was always partially accessible, but I gave it up when they abolished the feature to send you a disk in case of a disaster and you could not really do a full system image on it and it became very slow over time.

On Wed, 22 Aug 2018 09:11:34 -0400,
Steve Nutt wrote:

Is it accessible?

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Steve
Matzura
Sent: 22 August 2018 13:33
To: main@jfw.groups.io
Subject: Re: What backup software can we use with jaws?

What about CrashPlan? It's 1.5 times the price of an annual one-terabyte Dropbox plan, but has no limits. Or none that I've been able to find.


On 8/20/2018 1:33 PM, Jeremy wrote:
That much data will likely cost you quite a bit of cash to upload to cloud storage such as OneDrive, Dropbox, Carbonite, etc., not to mention the amount of time it will take to upload the information. If you're not constantly modifying the data, then the previous cloud storage solutions will not be all that useful to you. I suggest purchasing external hard drives. I have always purchased Western Digital Black or Seagate drives and never had a problem. For data backup you will not want to skimp on quality. :) Take a look at the following drive:

Amazon.com: WD 4TB Elements Portable External Hard Drive - USB 3.0
$99
https://is.gd/HJwtP2

JR

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jed
Barton
Sent: Monday, August 20, 2018 9:09 AM
To: main@jfw.groups.io
Subject: Re: What backup software can we use with jaws?

Hey guys. So speaking of backup software, got something i wanna do.
I ahve a feeling it won't be easy.
I do a lot of work with audio and have several tb of audio, including audio projects that i can't lose. Looking for a good place to put them for safe keeping. It includes a lot of audio music beds and stuff, not for distrobution, just for safe keeping. Any ideas for a good solution for this. I've got about 8 TB worth of stuff. I know, not an easy task.

On 8/20/18, Sieghard Weitzel <sieghard@live.ca> wrote:
Steve provides the link to this backup software which, as the name
implies, backs up your files and sytem. If you click on the link
you will be able to read the following summary:

Backup Everything!
Discover the renowned backup, restore, and synchronisation software
SyncBackPro . Backup to disk, network, FTP, the Cloud, MTP, email,
Windows, Linux, macOS & Android!



Discounts & Bundles

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jed
Barton
Sent: Monday, August 20, 2018 8:53 AM
To: main@jfw.groups.io
Subject: Re: What backup software can we use with jaws?

can you tell me about this backup software, what does it do?

On 8/20/18, Steve Nutt <steve@comproom.co.uk> wrote:
Hi,

Yes, Syncback, or Syncback Pro from http://www.2brightsparks.com

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David
Ingram
Sent: 16 August 2018 03:42
To: main@jfw.groups.io
Subject: What backup software can we use with jaws?

Hi list members, does anyone know of backup software that we can
use with jaws?










--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


Re: "Fast Startup" sound akin to Startup Sound, could we get one?

Steve Nutt
 

Just turn off fast startup, it’s a pain anyway.  Often your on-disk to memory transfer gets corrupted.  It causes more grief than it helps, in my experience.

 

All the best


Steve

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Vogel
Sent: 22 August 2018 15:42
To: main@jfw.groups.io
Subject: "Fast Startup" sound akin to Startup Sound, could we get one?

 

While this is not directly JAWS related, the issue of lack of a "coming back from being shut down when using Fast Startup" sound, as well as the lack of the good, old-fashioned shutdown sound, under Windows 10 comes up repeatedly on virtually every screen reader related group I'm participating in.  

I have just created feedback related to both, and here's the click-through link to the Windows 10 Feedback Hub for it (which, of course, only works for Windows 10 users):

               "Fast Startup" sound akin to Startup Sound, could we get one?

If this is an accessibility issue for you, please review this feedback and upvote it so that it will garner more attention.
--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

    The real art of conversation is not only to say the right thing in the right place but to leave unsaid the wrong thing at the tempting moment.

          ~ Dorothy Nevill


Re: file type associations

Nino Dagostino
 

Thank you that worked perfectly.

Thanks

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Wednesday, August 15, 2018 12:09 PM
To: main@jfw.groups.io
Subject: Re: file type associations

What are you trying to do? If all you want is to change a program associated
with a certain extension you can do it from the properties of the file, e.g.
press Alt+Enter on the file. For example, if you want to change it so MP3
files open in iTunes instead of Groove Music, find an MP3 file, press
Alt+Enter, then find the "Change" button and select iTunes.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Nino Dagostino
Sent: Wednesday, August 15, 2018 8:45 AM
To: main@jfw.groups.io
Subject: file type associations

Hi:

What is the quickest to get to file associations in windows10?

Thanks


Re: winamp or other programs I hope I can explain this right

Nino Dagostino
 

Hi:

When I use winamp I have to alt tab to get to the winamp screen.

I was hoping to stay in the folder where the mp3 files are.

Thank you.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Steve Matzura
Sent: Wednesday, August 15, 2018 12:15 PM
To: main@jfw.groups.io
Subject: Re: winamp or other programs I hope I can explain this right

If your system is s not doing that automatically, exactly what is it doing?


On 8/15/2018 11:17 AM, Nino Dagostino wrote:
Good morning:

If I open a list of mp3s to play and when I open one of the files I
would like winamp or what program I am using to com up to the forground.

Is it possibil to do that?

Thank you.


Latest Skype and Jaws 2018

Jim L
 

Heya folks,

 

Have installed the new Jaws update 2018 and latest Skype 8.2, Can anyone click on skype in the systray and access the menu list from there as we did with previous Skype version?

 

If so what is the menu list as Jaws doesn’t read it to me and I cannot cursor up or down on that list.

 

Cheers,

 

Jim

 


Re: JAWS and Excel - problem reading cells still exists

Sameer
 

Dear Allen,

Thank you for this Excel tip.

It solved my problem with JAWS not reading cell contents in Excel.

Also, thanks to all those who contributed to finding this solution.

Regards
Mr. Sameer Latey
Mumbai, India

-----Original Message-----
From: Alan Robbins via Groups.Io
Sent: 22 August, 2018 10:26 PM
To: main@jfw.groups.io
Subject: Re: JAWS and Excel - problem reading cells still exists

Hello,

Here are some notes I saved from Branden a while back which fixed this
problem for me.

Excel problem
One issue we have encountered recently is with Editing text in Excel.
This has generated some helpful discussion and testing by users of GitHub,
and the NVDA e-mail group. For some Excel users, when pressing F2 to edit a
cell, NVDA announces "Unknown". It then won't read any text in that cell.
This seems to have started after a recent update from Microsoft. The
workaround that seems to fix the issue for most users, is to uncheck "Allow
editing directly in cells". Not everyone is experiencing this, but if you
are, you can change this setting by doing the following:
1. Have Excel open.
2. Press "alt+f" to open the file menu then press "t" for the options.
3. Press "control+tab" until the focus is on the "Advanced" options page.
4. Press "alt+e" to toggle the "Allow editing directly in cells"
option. Ensure that this is unchecked.
5. Press "enter" to save the changes. Editing cell contents should now work
again.
Note that in turning this setting off, does change things slightly for
visual users:
. With editing directly in cells enabled, when F2 is pressed, the caret
appears in the cell itself. Text which would flow out of the cell flows to
the right, then to lines below. Cells covered by this text are hidden while
this happens. Text in the edited cell is coloured to highlight cell
references and parenthesis.
. With editing directly in cells disabled, when F2 is pressed, the caret
appears in the formula bar above the worksheet. Colouring of formula
elements is also done in the formula bar rather than the cell while editing.
Only text which fits in the cell is visible in the cell while the formula is
being edited.

I hope this helps,

Brandon

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Douglas C. DeCamp
Sent: Wednesday, August 22, 2018 8:36 AM
To: main@jfw.groups.io
Subject: Re: JAWS and Excel - problem reading cells still exists

JR,
While my problem is slightly different, it also was still not fixed. Mine
can't read cell formulas with references to other cells. I notified VFO
that my incident has still not been fixed and they indicated the incident #
would be upgraded again for another look. I provided them large amounts of
doc a couple of months ago. I sure hope they get it this time as it causes
me quite a bit of difficulty working around it.
--hth ---
DD

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jeremy
Sent: Tuesday, August 21, 2018 10:36 PM
To: main@jfw.groups.io
Subject: JAWS and Excel - problem reading cells still exists

Hi all,

I hope others have different results, but I'm still experiencing the problem
of JAWS not being able to read text in cells within Excel when I press F2.

I have discovered that if I type 8 characters or less, I can press F2 and
arrow through the letters and make my edits. If the cell contains a word or
words with more than 8 characters, and if I press F2, JAWS cannot read the
text inside the cell. It appears it's the number of characters in a cell
that trips up JAWS.

Hmm, for whatever reason it seems as though VFO is struggling to fix this
problem since it has existed for quite a bit of time and different versions
of JAWS.

JR


Re: jfe and chicken nugget

Francisco Salvador Crespo
 

I decide no to use Tw Blue.

As I was logged in on an other computer, I copyed the appdata fowlder to the unlogged machine and got it working.

 

Hope this helps.

 

 

 

De: main@jfw.groups.io <main@jfw.groups.io> En nombre de Cristóbal
Enviado el: jueves, 23 de agosto de 2018 13:03
Para: main@jfw.groups.io
Asunto: Re: jfe and chicken nugget

 

No. For those of us who have been logged in, there’s no change so far. So, if you’ve previously been authorized, then ride ride that bad boy until the wheels fall off if CN is your client of choice.

TW Blue is fine, but I am noticing much more hanging and program freezing with it than I ever experienced with CN.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of inamuddin khan
Sent: Wednesday, August 22, 2018 3:44 PM
To: main@jfw.groups.io
Subject: Re: jfe and chicken nugget

 

Dear, the matter of fact is that twitter has changed its method how to authorize your twitter account for your twitter’s client.

Chicken nugget has not updated it that’s why you are not able to login.

Now you have no option other than changing your twitter’s client.

I therefore would like to advise you to use TWBlue.

In order to download the latest TWBlue,

please click the following link

https://twblue.es/pubs/twblue_setup.exe

HTH

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

 

You can contact me via gmail:
inamuddin09@...

Inamuddin.ronaque@...

outlook:
inam092@...

yahoo:
inamuddin2010@...

Add my Skype ID:
charlsdarwin1
Meet me on facebook:
www.facebook.com/inamuddin786

Follow me on my twitter ID:
www.twitter.com/charlsdarwin1

Call me on my cell numbers:
+92-300-2227598 

+92-334-3348409

 

 

From: Francisco Salvador Crespo
Sent: Thursday, August 23, 2018 1:53 AM
To: main@jfw.groups.io
Subject: Re: jfe and chicken nugget

 

I can report the exact same issue. But in my case, I had Chicken Nugget working well until a dialog box appeared saying that there was an error when logging-in. After that I was unable to log back in since the browser window never opened.

Did somebody else find this issue?. If so, could you find a workaround for it?.

 

Best.

 

-----Mensaje original-----

De: main@jfw.groups.io <main@jfw.groups.io> En nombre de Jed Barton

Enviado el: sábado, 11 de agosto de 2018 13:45

Para: main <main@jfw.groups.io>

Asunto: jfe and chicken nugget

 

Hey guys,

 

OK, hoping someone can help.  So i just installed chicken nugget on this computer.  All went well.  i went to go add an existing twitter account.  It said it opened up a browser window.  It said please log in with the brower window that was just opened.  1 problem, no browser window is open.  Any ideas why?

 

 

 

 

 

 

 


Re: Excel reading problem on Surface tablet

Jeremy <jeremy.richards7@...>
 

Hi tom,

Since this Surface Pro is a new computer, are you certain it is on desktop
mode and not tablet mode? To check try this...

1. use the Start menu search box to look for the following:
Tablet mode settings

2. After opening tablet mode settings, the following is the very first item
you should land on:
When I sign in Combo box: Use X mode
Note: X stands for the various options in this combo box.

I should note that when I first purchased my Windows 10 tablet, it was
originally set to Tablet mode, and I had to use the arrow keys to change
this setting so my tablet would behave more like a desktop than a tablet.

I also want to add that on these lists individuals quickly throw around the
idea of performing a JAWS repair, but this isn't always necessary. In many
cases, users make lots of customizations to JAWS, and when a JAWS repair is
performed, these customizations are undone, which means setting up JAWS once
again--this takes time and effort. :)

Please let me know if my suggestion above helped in any way, and we'll take
it from there. :)

JR

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Babinszki
Sent: Wednesday, August 22, 2018 4:21 PM
To: main@jfw.groups.io
Subject: Excel reading problem on Surface tablet

Hi,
My name is Tom Babinszki, I just joined the list.
I have an interesting Excel reading problem.
I just got a Surface Pro running Windows 10 Pro.
I am not able to navigate excel sheets. When I press a cursor key, nothing
happens. There are two exceptions, one when I press a cursor key while
starting Excel, or when I switch over to it while running JAWS repair.

It works just fine with NVDA and Narrator. I did try the same Excel sheet
with the latest version of JAWS on Windows 7, that works too.
Here is what I have tried:
I repaired and reinstalled JAWS. Currently I'm running the latest version,
but I also tried JAWS 18 and 17, same results.
I did call Freedom, they gave me some new scripts to install but to be
honest it even broke what already worked.

Also, it maybe worth mentioning that I am able to read the workbooks on the
Surface using the touch cursor, but that is limited, and since I do a lot of
keyboard entry the cursor navigation is necessary.

Thank you for any help:

Tom


Re: jfe and chicken nugget

Cristóbal
 

No. For those of us who have been logged in, there’s no change so far. So, if you’ve previously been authorized, then ride ride that bad boy until the wheels fall off if CN is your client of choice.

TW Blue is fine, but I am noticing much more hanging and program freezing with it than I ever experienced with CN.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of inamuddin khan
Sent: Wednesday, August 22, 2018 3:44 PM
To: main@jfw.groups.io
Subject: Re: jfe and chicken nugget

 

Dear, the matter of fact is that twitter has changed its method how to authorize your twitter account for your twitter’s client.

Chicken nugget has not updated it that’s why you are not able to login.

Now you have no option other than changing your twitter’s client.

I therefore would like to advise you to use TWBlue.

In order to download the latest TWBlue,

please click the following link

https://twblue.es/pubs/twblue_setup.exe

HTH

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

 

You can contact me via gmail:
inamuddin09@...

Inamuddin.ronaque@...

outlook:
inam092@...

yahoo:
inamuddin2010@...

Add my Skype ID:
charlsdarwin1
Meet me on facebook:
www.facebook.com/inamuddin786

Follow me on my twitter ID:
www.twitter.com/charlsdarwin1

Call me on my cell numbers:
+92-300-2227598 

+92-334-3348409

 

 

From: Francisco Salvador Crespo
Sent: Thursday, August 23, 2018 1:53 AM
To: main@jfw.groups.io
Subject: Re: jfe and chicken nugget

 

I can report the exact same issue. But in my case, I had Chicken Nugget working well until a dialog box appeared saying that there was an error when logging-in. After that I was unable to log back in since the browser window never opened.

Did somebody else find this issue?. If so, could you find a workaround for it?.

 

Best.

 

-----Mensaje original-----

De: main@jfw.groups.io <main@jfw.groups.io> En nombre de Jed Barton

Enviado el: sábado, 11 de agosto de 2018 13:45

Para: main <main@jfw.groups.io>

Asunto: jfe and chicken nugget

 

Hey guys,

 

OK, hoping someone can help.  So i just installed chicken nugget on this computer.  All went well.  i went to go add an existing twitter account.  It said it opened up a browser window.  It said please log in with the brower window that was just opened.  1 problem, no browser window is open.  Any ideas why?

 

 

 

 

 

 

 


Re: Finding and accessing emails in Outlook using JAWS

 

I usually use Control+E to go to the search box, type my search term, press enter and then I press Shift+Tab which puts me in a list of messages, the Inbox I guess with only those messages showing which meet the search term.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of jaws trial
Sent: Wednesday, August 22, 2018 1:35 AM
To: main@jfw.groups.io
Subject: Finding and accessing emails in Outlook using JAWS

 

Hi,
I use JAWS 2018 in my Windows 10 PC. I use Outlook and was trying to find a particular email and used Shift + Ctrl + F for the same. The dialogue box popped up and I typed in what I was looking for. The email that was found using this method shows at the bottom of the dialogue box. However, I was unable to access it using the keyboard. Pressing Tab key took me back to the top of the dialogue box but not to the email that was found. The email, however, can be accessed by clicking on it. Can anyone help me on how I can access it using Keyboard?
Thanks!


Re: Query about my message

Bill White <billwhite92701@...>
 

Hi, Ruchi. As Jim Fettgather said, try using F6, once you get your search results. This switches you from the search pane to the results pane.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of jaws trial
Sent: Thursday, August 23, 2018 1:47 AM
To: main@jfw.groups.io
Subject: Query about my message

 

Hi,

I had posted a message on the forum seeking help for using outlook with Jaws to find and access emails. However, I cannot see my message being posted on the forum. Could you please help to sort this out? 

Thanks.

Regards,

Ruchi


Re: "Fast Startup" sound akin to Startup Sound, could we get one?

 

As an aside, I have been told that certain security software (and, no, I don't remember which ones) are set up by default these days to consider Tinyurl and similar URLs as suspicious and block them.  That might be what was being experienced by Mike B. with the original URL.
--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

    The real art of conversation is not only to say the right thing in the right place but to leave unsaid the wrong thing at the tempting moment.

          ~ Dorothy Nevill


Re: Query about my message

James Homuth
 

As you’re a new member, your first few messages are moderated. I’ve just approved it.

 

James,

List Admin

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of jaws trial
Sent: August-23-18 4:47 AM
To: main@jfw.groups.io
Subject: Query about my message

 

Hi,

I had posted a message on the forum seeking help for using outlook with Jaws to find and access emails. However, I cannot see my message being posted on the forum. Could you please help to sort this out? 

Thanks.

Regards,

Ruchi


Query about my message

jaws trial
 

Hi,
I had posted a message on the forum seeking help for using outlook with Jaws to find and access emails. However, I cannot see my message being posted on the forum. Could you please help to sort this out? 
Thanks.
Regards,
Ruchi


Re: Finding and accessing emails in Outlook using JAWS

Jim Fettgather
 

Once the email is found, you might try pressing F6 to switch to the
message pane displaying the search results.

On 8/22/18, jaws trial <jawstrial@gmail.com> wrote:
Hi,
I use JAWS 2018 in my Windows 10 PC. I use Outlook and was trying to find a
particular email and used Shift + Ctrl + F for the same. The dialogue box
popped up and I typed in what I was looking for. The email that was found
using this method shows at the bottom of the dialogue box. However, I was
unable to access it using the keyboard. Pressing Tab key took me back to the
top of the dialogue box but not to the email that was found. The email,
however, can be accessed by clicking on it. Can anyone help me on how I can
access it using Keyboard?
Thanks!