Date   

Re: Navigating Entries In An E-mail Group List

Tom Behler
 

Thanks, Dan.

 

The list I’m working with has about 50 members, and I can’t navigate through the entire thing via the Jaws cursor.

 

It used to be so easy when I could use the PC cursor and the arrow keys.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Tuesday, March 26, 2019 4:24 PM
To: main@jfw.groups.io
Subject: Re: Navigating Entries In An E-mail Group List

 

Tom,

  I use JAWS cursor and then arrow key to get through list.  Once on a name I hit enter if I want to edit that name.  Arrow keys take me through list although I am not certain if the length of list matters.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: Tuesday, March 26, 2019 4:10 PM
To: main@jfw.groups.io
Subject: Re: Navigating Entries In An E-mail Group List

 

Dan:

 

If I use the Jaws cursor, I can only get part of the list.

 

Is there a way to use the Jaws cursor and be able to navigate the entire group list?

 

Thanks!

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Tuesday, March 26, 2019 4:08 PM
To: main@jfw.groups.io
Subject: Re: Navigating Entries In An E-mail Group List

 

Hi,

  I am using Win 10 and Outlook 2016 and , thus far, the only way I have found to scrool the list is with JAWS cursor.  Using that cursor I can then edit or delete from list.  I can add using PC cursor. 

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: Tuesday, March 26, 2019 3:47 PM
To: jfw list <jfw@groups.io>
Subject: FW: Navigating Entries In An E-mail Group List

 

            I’m re-sending, since I haven’t gotten a response thus far.

 

If it helps, I am using Windows 10 with the latest build of Jaws 2019.

 

See below for more details.

 

Tom Behler

 

 

From: Tom Behler <tombehler@...>
Sent: Tuesday, March 26, 2019 9:49 AM
To: jfw list <jfw@groups.io>
Subject: Navigating Entries In An E-mail Group List

 

Hello.

 

Does anyone have some good techniques for navigating entries in an already-created e-mail group list?

 

I used to be able to arrow down through the list with no problem, but that has changed with Outlook 2016 and the last few Jaws updates.

 

I can still use my Jaws cursor, but navigation is a bit awkward, and I can’t cover the entire list that way.

 

Thanks for any suggestions.

 

Tom Behler

 

 


Re: Using jaws on mark book pro

Palmer Loux
 

The primary issues is with the Mac laptop keyboard which does not have bumped numlockand insert keys like you are used to in a Windows laptop
Yes a MacBook Pro can be bootcamped with a Windows OS but you will not be happy with the Mac keyboard layout if you are used to JAWS proficiency in Windows laptop
Yes you can designate Caps Lock as the JAWS key in Options basics but you will give up some nice keys and windows commands..

On Mar 9, 2019, at 4:00 PM, Adekoya Rasak <rasakadekoya@gmail.com> wrote:

Hello,
I have a mark book pro laptop. Can I install jaws on it if i install windows OS on it.

Will it work well with the jaws and window key command? Any one with experience on this.

Thank you


--
Palmer from CBVI


Re: Navigating Entries In An E-mail Group List

Dan Longmore
 

Tom,

  I use JAWS cursor and then arrow key to get through list.  Once on a name I hit enter if I want to edit that name.  Arrow keys take me through list although I am not certain if the length of list matters.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: Tuesday, March 26, 2019 4:10 PM
To: main@jfw.groups.io
Subject: Re: Navigating Entries In An E-mail Group List

 

Dan:

 

If I use the Jaws cursor, I can only get part of the list.

 

Is there a way to use the Jaws cursor and be able to navigate the entire group list?

 

Thanks!

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Tuesday, March 26, 2019 4:08 PM
To: main@jfw.groups.io
Subject: Re: Navigating Entries In An E-mail Group List

 

Hi,

  I am using Win 10 and Outlook 2016 and , thus far, the only way I have found to scrool the list is with JAWS cursor.  Using that cursor I can then edit or delete from list.  I can add using PC cursor. 

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: Tuesday, March 26, 2019 3:47 PM
To: jfw list <jfw@groups.io>
Subject: FW: Navigating Entries In An E-mail Group List

 

            I’m re-sending, since I haven’t gotten a response thus far.

 

If it helps, I am using Windows 10 with the latest build of Jaws 2019.

 

See below for more details.

 

Tom Behler

 

 

From: Tom Behler <tombehler@...>
Sent: Tuesday, March 26, 2019 9:49 AM
To: jfw list <jfw@groups.io>
Subject: Navigating Entries In An E-mail Group List

 

Hello.

 

Does anyone have some good techniques for navigating entries in an already-created e-mail group list?

 

I used to be able to arrow down through the list with no problem, but that has changed with Outlook 2016 and the last few Jaws updates.

 

I can still use my Jaws cursor, but navigation is a bit awkward, and I can’t cover the entire list that way.

 

Thanks for any suggestions.

 

Tom Behler

 

 


Re: Navigating Entries In An E-mail Group List

Tom Behler
 

Dan:

 

If I use the Jaws cursor, I can only get part of the list.

 

Is there a way to use the Jaws cursor and be able to navigate the entire group list?

 

Thanks!

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Tuesday, March 26, 2019 4:08 PM
To: main@jfw.groups.io
Subject: Re: Navigating Entries In An E-mail Group List

 

Hi,

  I am using Win 10 and Outlook 2016 and , thus far, the only way I have found to scrool the list is with JAWS cursor.  Using that cursor I can then edit or delete from list.  I can add using PC cursor. 

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: Tuesday, March 26, 2019 3:47 PM
To: jfw list <jfw@groups.io>
Subject: FW: Navigating Entries In An E-mail Group List

 

            I’m re-sending, since I haven’t gotten a response thus far.

 

If it helps, I am using Windows 10 with the latest build of Jaws 2019.

 

See below for more details.

 

Tom Behler

 

 

From: Tom Behler <tombehler@...>
Sent: Tuesday, March 26, 2019 9:49 AM
To: jfw list <jfw@groups.io>
Subject: Navigating Entries In An E-mail Group List

 

Hello.

 

Does anyone have some good techniques for navigating entries in an already-created e-mail group list?

 

I used to be able to arrow down through the list with no problem, but that has changed with Outlook 2016 and the last few Jaws updates.

 

I can still use my Jaws cursor, but navigation is a bit awkward, and I can’t cover the entire list that way.

 

Thanks for any suggestions.

 

Tom Behler

 

 


Re: FW: Navigating Entries In An E-mail Group List

Tom Behler
 

Brian:

 

Right now, when I arrow up or down through an e-mail group list, nothing happens;  in other words, none of the information for any of the group members is spoken.

 

I have made sure my screen is maximized.

 

I can get information for some of the group members by using my Jaws cursor, but I can only view part of the list that way.

 

I’d like to be able to arrow up and down through the group member list like I used to do with earlier versions of Windows, Jaws, and Outlook.

 

I have Outlook set up in the usual way with the folder pane set to normal, and the reading pane set to off.

 

I access my contacts via the control shift B. command.

 

I hope this helps.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Vogel
Sent: Tuesday, March 26, 2019 4:01 PM
To: main@jfw.groups.io
Subject: Re: FW: Navigating Entries In An E-mail Group List

 

Tom,

            I believe you'll have to be more specific about what's actually happening (which clearly you don't want) and what you'd like to be happening instead.   It would also help to know how you have Outlook set up as far as conversation view goes and/or whether your various e-mail lists have their respective messages filtered into folders other than inbox, and whether you're viewing from those folders.
--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

   Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, and wrong.

         ~ H.L. Mencken, AKA The Sage of Baltimore


Re: Navigating Entries In An E-mail Group List

Dan Longmore
 

Hi,

  I am using Win 10 and Outlook 2016 and , thus far, the only way I have found to scrool the list is with JAWS cursor.  Using that cursor I can then edit or delete from list.  I can add using PC cursor. 

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: Tuesday, March 26, 2019 3:47 PM
To: jfw list <jfw@groups.io>
Subject: FW: Navigating Entries In An E-mail Group List

 

            I’m re-sending, since I haven’t gotten a response thus far.

 

If it helps, I am using Windows 10 with the latest build of Jaws 2019.

 

See below for more details.

 

Tom Behler

 

 

From: Tom Behler <tombehler@...>
Sent: Tuesday, March 26, 2019 9:49 AM
To: jfw list <jfw@groups.io>
Subject: Navigating Entries In An E-mail Group List

 

Hello.

 

Does anyone have some good techniques for navigating entries in an already-created e-mail group list?

 

I used to be able to arrow down through the list with no problem, but that has changed with Outlook 2016 and the last few Jaws updates.

 

I can still use my Jaws cursor, but navigation is a bit awkward, and I can’t cover the entire list that way.

 

Thanks for any suggestions.

 

Tom Behler

 

 


Re: FW: Navigating Entries In An E-mail Group List

 

Tom,

            I believe you'll have to be more specific about what's actually happening (which clearly you don't want) and what you'd like to be happening instead.   It would also help to know how you have Outlook set up as far as conversation view goes and/or whether your various e-mail lists have their respective messages filtered into folders other than inbox, and whether you're viewing from those folders.
--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

   Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, and wrong.

         ~ H.L. Mencken, AKA The Sage of Baltimore


FW: Navigating Entries In An E-mail Group List

Tom Behler
 

            I’m re-sending, since I haven’t gotten a response thus far.

 

If it helps, I am using Windows 10 with the latest build of Jaws 2019.

 

See below for more details.

 

Tom Behler

 

 

From: Tom Behler <tombehler@...>
Sent: Tuesday, March 26, 2019 9:49 AM
To: jfw list <jfw@groups.io>
Subject: Navigating Entries In An E-mail Group List

 

Hello.

 

Does anyone have some good techniques for navigating entries in an already-created e-mail group list?

 

I used to be able to arrow down through the list with no problem, but that has changed with Outlook 2016 and the last few Jaws updates.

 

I can still use my Jaws cursor, but navigation is a bit awkward, and I can’t cover the entire list that way.

 

Thanks for any suggestions.

 

Tom Behler

 

 


Blogging under Windows 10

Denis Sariyannis <denis.sariyannis@...>
 

Hi all,
are there accessible apps you would recommend for blogging? Sometimes
I feel bothered by the web UIs. So I'm searching for another solution
to maintain it in a native Windows app.
I'm running JAWS 2019 and Windows 10.

Thanks and best regards
Denis


--
Denis Sariyannis
Mail: denis.sariyannis@gmail.com
Phone: +49 6227 6982766
Mobile: +49 176 66830900


Navigating Entries In An E-mail Group List

Tom Behler
 

Hello.

 

Does anyone have some good techniques for navigating entries in an already-created e-mail group list?

 

I used to be able to arrow down through the list with no problem, but that has changed with Outlook 2016 and the last few Jaws updates.

 

I can still use my Jaws cursor, but navigation is a bit awkward, and I can’t cover the entire list that way.

 

Thanks for any suggestions.

 

Tom Behler

 

 


Re: JAWS Scripts For Medisoft billing software by MICROWISE

 

You would have to contact people who write scripts and pay them for an assessment. Nobody is going to do this for free, I explored getting scripts written for software I use at my retail store and one company told me an assessment would cost about $2,000 and writing the actual scripts could easily be $10,000 or $15,000.

 

Best regards,

Sieghard

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mr. Alexander Scott Kaiser I.
Sent: Monday, March 25, 2019 4:17 PM
To: MAIN@JFW.GROUPS.IO; JAWSSCRIPTS@...
Subject: JAWS Scripts For Medisoft billing software by MICROWISE
Importance: High
Sensitivity: Confidential

 

Good, Afternoon, All,:

Good, Afternoon, All, this is Mr. Alexander Scott Kaiser. Can someone please write Jaws scripts for the latest version Of The Medisoft billing software, and, all future versions of  The Medisoft billing software  with JAWS 17.0, JAWS 18.0, JAWS 2018, JAWS 2019, JAWS 2020, and, all future versions of JAWS after JAWS 2020  ? I am going to be studying to become a Medical administrative Office assistant at The Ocean County, New Jersey Vocational Technical school , and, I was just wondering if scripts can be written for this software. Please E-Mail me off list at MISTER.ALEXANDER.SCOTT.KAISER.I.1.0.3.0.1.9.9.0.99@....  Please let me know.

Thank You,

Mr. Alexander Scott Kaiser

 

 

 

 


Re: How to change margins using MS Word ribbons?

Ann Byrne
 

At 08:39 PM 3/25/2019, you wrote:

Hello,


I finally found the Margins sub menu. There is a list of margin types and I assume that I just press ENTER to set it.


The problem is that when I use two Jaws commands to get the left margin setting, I get two different values.


When in the Word document, (before setting margins) and with the cursor at the top left, I use these commands: alt plus numpad dot and the INSERT plus F1.


The first Jaws command gives the left margin as 2.5 inches while the latter command gives a left margin of .5 inche.


If I set the margins to "wide" the left margin should be 2 inches but these commands give it as 2 and 4 inches.


I can't duplicate this. I would reboot and see if that helps. sometimes JAWS looses its perspective in Office after a while. Not just in Excel, although that happens more quickly, but also in Word.



What is happening?


Peter T.



On 3/25/2019 7:43 PM, Ann Byrne wrote:
Go to layout on the ribbon. The first item is margins.


Or press alt+p, then m.

Oddly, only custom margins shows top and bottom, as well as left and right. But setting margins to narrow, adjusts both sides and top and bottom, even though it doesn't indicate it is going to do that. Check with insert+f1 for margin settings.
At 06:00 PM 3/25/2019, you wrote:

Thanks for your responses.


The alt+q does not work but the alt+P might.


I should have mentioned that I have Word 2007 with the latest version of Jaws 2019 with the virtual ribbon feature turned on.


Perhaps the alt+q works with a more recent version then with the Word 2007 that I have.


Brian suggested:

         ALT+P,M (Layout Ribbon, Margins option)


The alt+p gives me:

   virtual ribbons, page layout tab


Pressing "m" gives me:

  lower ribbon, create submenu


From here I tried tabbing and arrowing down, left, right and up.

I can't find a layout ribbon.

Nothing was heard that might lead to a path to margins.

Any more suggestions on where to navigate from alt+p?


Thanks,


Peter T.


On 3/25/2019 5:28 PM, Brian Vogel wrote:
Peter,

       ALT+P,M (Layout Ribbon, Margins option)
       You can then down arrow through a variety of common margin settings to select from OR if you want custom margins, Hit A, which brings up the Page Layout dialog with the Margins Tab selected and open. The various fields in the Margins tab are self explanatory (except, perhaps for Gutter, which I never change).

--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763 Â

 Â Explanations exist; they have existed for all time; there is always a well-known solution to every human problem —” neat, plausible, and wrong.

     ~ H.L. Mencken, AKA The Sage of Baltimore



JAWS Scripts For Medisoft billing software by MICROWISE

Mr. Alexander Scott Kaiser I.
 

Good, Afternoon, All,:

Good, Afternoon, All, this is Mr. Alexander Scott Kaiser. Can someone please write Jaws scripts for the latest version Of The Medisoft billing software, and, all future versions of  The Medisoft billing software  with JAWS 17.0, JAWS 18.0, JAWS 2018, JAWS 2019, JAWS 2020, and, all future versions of JAWS after JAWS 2020  ? I am going to be studying to become a Medical administrative Office assistant at The Ocean County, New Jersey Vocational Technical school , and, I was just wondering if scripts can be written for this software. Please E-Mail me off list at MISTER.ALEXANDER.SCOTT.KAISER.I.1.0.3.0.1.9.9.0.99@....  Please let me know.

Thank You,

Mr. Alexander Scott Kaiser

 

 

 

 


Re: How to change margins using MS Word ribbons?

Peter Tesar
 

Hello,


I finally found the Margins sub menu. There is a list of margin types and I assume that I just press ENTER to set it.


The problem is that when I use two Jaws commands to get the left margin setting, I get two different values.


When in the Word document, (before setting margins) and with the cursor at the top left, I use these commands: alt plus numpad dot and the INSERT plus F1.


The first Jaws command gives the left margin as 2.5 inches while the latter command gives a left margin of .5 inche.


If I set the margins to "wide" the left margin should be 2 inches but these commands give it as 2 and 4 inches.


What is happening?


Peter T.



On 3/25/2019 7:43 PM, Ann Byrne wrote:
Go to layout on the ribbon.  The first item is margins.


Or press alt+p, then m.

Oddly, only custom margins shows top and bottom, as well as left and right.  But setting margins to narrow, adjusts both sides and top and bottom, even though it doesn't indicate it is going to do that.  Check with insert+f1 for margin settings.
At 06:00 PM 3/25/2019, you wrote:

Thanks for your responses.


The alt+q does not work but the alt+P might.


I should have mentioned that I have Word 2007 with the latest version of Jaws 2019 with the virtual ribbon feature turned on.


Perhaps the alt+q works with a more recent version then with the Word 2007 that I have.


Brian suggested:

                ALT+P,M  (Layout Ribbon, Margins option)


The alt+p gives me:

    virtual ribbons, page layout tab


Pressing "m" gives me:

   lower ribbon, create submenu


From here I tried tabbing and arrowing down, left, right and up.

I can't find a layout ribbon.

Nothing was heard that might lead to a path to margins.

Any more suggestions on where to navigate from alt+p?


Thanks,


Peter T.


On 3/25/2019 5:28 PM, Brian Vogel wrote:
Peter,

             ALT+P,M  (Layout Ribbon, Margins option)
             You can then down arrow through a variety of common margin settings to select from OR if you want custom margins, Hit A, which brings up the Page Layout dialog with the Margins Tab selected and open.  The various fields in the Margins tab are self explanatory (except, perhaps for Gutter, which I never change).

--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763 Â

   Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, and wrong.

         ~ H.L. Mencken, AKA The Sage of Baltimore







Re: How to change margins using MS Word ribbons?

 

You're going to need someone who has Word 2007.   I haven't had that since around 2011, and just recently went from 2010 to 2016.  Things have changed significantly, and I also avoid the JAWS virtual ribbon feature as it makes actually using the ribbons as they are meant to be used more difficult.

--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

   Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, and wrong.

         ~ H.L. Mencken, AKA The Sage of Baltimore


Re: How to change margins using MS Word ribbons?

Ann Byrne
 

Go to layout on the ribbon. The first item is margins.


Or press alt+p, then m.

Oddly, only custom margins shows top and bottom, as well as left and right. But setting margins to narrow, adjusts both sides and top and bottom, even though it doesn't indicate it is going to do that. Check with insert+f1 for margin settings.

At 06:00 PM 3/25/2019, you wrote:

Thanks for your responses.


The alt+q does not work but the alt+P might.


I should have mentioned that I have Word 2007 with the latest version of Jaws 2019 with the virtual ribbon feature turned on.


Perhaps the alt+q works with a more recent version then with the Word 2007 that I have.


Brian suggested:

         ALT+P,M (Layout Ribbon, Margins option)


The alt+p gives me:

   virtual ribbons, page layout tab


Pressing "m" gives me:

  lower ribbon, create submenu


From here I tried tabbing and arrowing down, left, right and up.

I can't find a layout ribbon.

Nothing was heard that might lead to a path to margins.

Any more suggestions on where to navigate from alt+p?


Thanks,


Peter T.


On 3/25/2019 5:28 PM, Brian Vogel wrote:
Peter,

       ALT+P,M (Layout Ribbon, Margins option)
       You can then down arrow through a variety of common margin settings to select from OR if you want custom margins, Hit A, which brings up the Page Layout dialog with the Margins Tab selected and open. The various fields in the Margins tab are self explanatory (except, perhaps for Gutter, which I never change).

--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763 Â

  Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, and wrong.

     ~ H.L. Mencken, AKA The Sage of Baltimore


Re: How to change margins using MS Word ribbons?

Peter Tesar
 

Thanks for your responses.


The alt+q does not work but the alt+P might.


I should have mentioned that I have Word 2007 with the latest version of Jaws 2019 with the virtual ribbon feature turned on.


Perhaps the alt+q works with a more recent version then with the Word 2007 that I have.


Brian suggested:

                ALT+P,M  (Layout Ribbon, Margins option)


The alt+p gives me:

    virtual ribbons, page layout tab


Pressing "m" gives me:

   lower ribbon, create submenu


From here I tried tabbing and arrowing down, left, right and up.


I can't find a layout ribbon.

Nothing was heard that might lead to a path to margins.


Any more suggestions on where to navigate from alt+p?


Thanks,


Peter T.


On 3/25/2019 5:28 PM, Brian Vogel wrote:
Peter,

             ALT+P,M  (Layout Ribbon, Margins option)
             You can then down arrow through a variety of common margin settings to select from OR if you want custom margins, Hit A, which brings up the Page Layout dialog with the Margins Tab selected and open.  The various fields in the Margins tab are self explanatory (except, perhaps for Gutter, which I never change).

--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

   Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, and wrong.

         ~ H.L. Mencken, AKA The Sage of Baltimore


Re: How to change margins using MS Word ribbons?

 

Peter,

             ALT+P,M  (Layout Ribbon, Margins option)
             You can then down arrow through a variety of common margin settings to select from OR if you want custom margins, Hit A, which brings up the Page Layout dialog with the Margins Tab selected and open.  The various fields in the Margins tab are self explanatory (except, perhaps for Gutter, which I never change).

--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

   Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, and wrong.

         ~ H.L. Mencken, AKA The Sage of Baltimore


Re: How to change margins using MS Word ribbons?

Ben Humphreys <brhbrhbrh@...>
 

Hi Peter,

With Alt+Q you don't hardly need the ribbons anymore.

Try this:
Alt+Q
Type margins
Then press down arrow to navigate the search results

Hope this helps,

Ben

At 04:38 PM 3/25/2019, you wrote:

Hello,


I'm having trouble navigating these ribbons.


I need to change the margins in MS Word.

Any help will be appreciated.


Thanks, Peter T.


How to change margins using MS Word ribbons?

Peter Tesar
 

Hello,


I'm having trouble navigating these ribbons.


I need to change the margins in MS Word.

Any help will be appreciated.


Thanks, Peter T.