Date   

Re: Adding alt tags to images?

ann
 

Hi,

The Alt tags I am talking about are what is seen by any decent modern screen reader when browsing images ont he web. I have an image to upload, and I'd like to add an alt tag to it since it only currently has a Jaws label, wich is nice for my local Jaws and computer use, but probably won't help anyone else much on the web.

So, would Word be the easiest way for me to add an Alt tag to this image that all oculd read before uploading it? Or would some other tool be better?

Thanks for any advice,
~Ann


On Sun, Mar 10, 2019 at 11:24 AM, Brian Vogel wrote:
Ann,

            Are you asking about adding Alt Text for an image using Microsoft Word?  If so, it's a cinch, as it is under most HTML editors, too.

            If you're referring to something after the fact then it becomes significantly more complicated and murkier.

--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

   Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, and wrong.

         ~ H.L. Mencken, AKA The Sage of Baltimore


Re: Adding alt tags to images?

JM Casey
 

Hi Anne.

It might have something to do with your encoding; I do not see these
characters normally in Brian's messages, but in the one you quoted below
yours, as in, in your response where you have quoted his message, they do
appear.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ann Byrne
Sent: March 10, 2019 11:45 AM
To: main@jfw.groups.io
Subject: Re: Adding alt tags to images?

brian,

Is there a way to avoid the  characters
liberally sprinkled through your messages? the messages would be sooo much
easier to read without them.


At 10:24 AM 3/10/2019, you wrote:
Ann,      Are you asking about
adding Alt Text for an image using Microsoft
Word? If so, it's a cinch, as it is under most
HTML editors, too.      If you're
referring to something after the fact then it
becomes significantly more complicated and murkier.--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763 Â

  Explanations exist; they have existed for
all time; there is always a well-known solution
to every human problem — neat, plausible, andd wrong.

     ~ H.L. Mencken, AKA The Sage of Baltimore


Re: Adding alt tags to images?

 

Ann,

That's something on your end, not mine, and I have no idea what that might be.

--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

   Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, and wrong.

         ~ H.L. Mencken, AKA The Sage of Baltimore


Re: Adding alt tags to images?

Ann Byrne
 

brian,

Is there a way to avoid the  characters liberally sprinkled through your messages? the messages would be sooo much easier to read without them.

At 10:24 AM 3/10/2019, you wrote:
Ann,      Are you asking about adding Alt Text for an image using Microsoft Word? If so, it's a cinch, as it is under most HTML editors, too.      If you're referring to something after the fact then it becomes significantly more complicated and murkier.--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763 Â

  Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, andd wrong.

     ~ H.L. Mencken, AKA The Sage of Baltimore


Re: volume control, can't switch it from my keyboard

Ann Byrne
 

If your keyboard has an fn key--often where the right windows key ought to be, try pressing it along with the volume up and down keys.

Maybe ...

At 09:39 AM 3/10/2019, you wrote:
You could try reinstalling the driver.
The other thing to do is more envolved is to try spraying some electrical cleaner on the keyboard controls.
Just a thought.



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jed Barton
Sent: Sunday, March 10, 2019 10:21 AM
To: main <main@jfw.groups.io>
Subject: volume control, can't switch it from my keyboard

Hey guys,

OK, this has happened before, but trying to figure out why. Every once in a while with windows 10, i can't seem to change my volume with my keyboard. Ya know how a lot of keyboards have controls across the top. Most of the time it works, but every once in a while it just stops, but yet i can type just fine and all that. It's really annoying cause i'll turn the volume up and down a bit. Any ideas on how to fix it?






Re: Adding alt tags to images?

 

Ann,

            Are you asking about adding Alt Text for an image using Microsoft Word?  If so, it's a cinch, as it is under most HTML editors, too.

            If you're referring to something after the fact then it becomes significantly more complicated and murkier.

--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

   Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, and wrong.

         ~ H.L. Mencken, AKA The Sage of Baltimore


Re: Adding alt tags to images?

Richard B. McDonald
 

I think there is a thing in JAWS called "graphics labeler." JAWS+g is the command, I think. Your cursor needs to be on the graphic. Check out the JAWS help topic on it. if you are in another program, say Word, there is a different way to put an alt tag on an image you have inserted; the applications key.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of ann
Sent: Sunday, March 10, 2019 5:45 AM
To: main@jfw.groups.io
Subject: Adding alt tags to images?

Hi,


Is there a reliable way to add an alt tag to an image with the latest version of Jaws, and perhaps latest Word or some other program?


If someone knows other ways or programs for this that work better with
other screen readers, please reply to me off list. I can use either NVDA
or Narrator as well.


Thanks,

~Ann


Re: dumb question about say current word command

tele1974@...
 

Would trying to reset to factory settings maybe fix this? I just don’t understand how every other command would work besides this one.
kurt


Re: volume control, can't switch it from my keyboard

Nino Dagostino
 

You could try reinstalling the driver.
The other thing to do is more envolved is to try spraying some electrical cleaner on the keyboard controls.
Just a thought.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jed Barton
Sent: Sunday, March 10, 2019 10:21 AM
To: main <main@jfw.groups.io>
Subject: volume control, can't switch it from my keyboard

Hey guys,

OK, this has happened before, but trying to figure out why. Every once in a while with windows 10, i can't seem to change my volume with my keyboard. Ya know how a lot of keyboards have controls across the top. Most of the time it works, but every once in a while it just stops, but yet i can type just fine and all that. It's really annoying cause i'll turn the volume up and down a bit. Any ideas on how to fix it?


volume control, can't switch it from my keyboard

Jed Barton
 

Hey guys,

OK, this has happened before, but trying to figure out why. Every
once in a while with windows 10, i can't seem to change my volume with
my keyboard. Ya know how a lot of keyboards have controls across the
top. Most of the time it works, but every once in a while it just
stops, but yet i can type just fine and all that. It's really
annoying cause i'll turn the volume up and down a bit. Any ideas on
how to fix it?


Adding alt tags to images?

ann
 

Hi,


Is there a reliable way to add an alt tag to an image with the latest version of Jaws, and perhaps latest Word or some other program?


If someone knows other ways or programs for this that work better with other screen readers, please reply to me off list. I can use either NVDA or Narrator as well.


Thanks,

~Ann


Re: ResearchIt Weather

Panagiotis Antonopoulos
 

Hi all,

I have never come to explore the feature, though a long standing jaws user. Just wondering whether it is a featured designed to be of use only to American users, or has any value for us internationals.

                                                            Cheers from Ioannina,

                                                            Takis

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Dave Mitchell
Sent: Saturday, March 9, 2019 8:07 PM
To: jfw@groups.io
Subject: ResearchIt Weather

 

Hi,  It’s a very handy feature when working.  Mine has failed the last 2 days.  Anyone else? 

Using the latest JAWS 2019 and Windows 10.  Thanks, Mitch

 

“Tolerance is the virtue of the man without convictions.” G. K. Chesterton

 

 

 

 


Re: need help unmuting volume

Curtis Delzer
 

good shot, missed the rest of that, and thank you for being thorough.

On 3/9/2019 8:01 AM, ratshtron wrote:
this is true, but a shortcut must be created for
the program and then you need to change the last
parameter to a 0 to unmute the sound. as I
mentioned earlier, you can assign a keystroke to
the shortcut so you can activate the shortcut on
the fly. the last parameter works this way, 1
mutes, 2 makes the shortcut a toggle, and 0
unmutes the sound. so the target field has to be
edited to look like this once the program is
placed in the c:\windows\system32 folder

c:\windows\system32\nircmd.exe mutesysvolume 0

you can then move the shortcut to the startup folder.


Legend has it that on Friday 3/8/2019 10:46 PM, Curtis Delzer said:
----------------------------------------
or you can put it in your startup group so every
time your computer re-boots it will unmute the sound.

On 3/8/2019 7:55 PM, Tyler Wood wrote:
Hi,

Alternatively this program can allow you to
just press enter on a file and have all volume unmuted.

https://www.nirsoft.net/utils/sound_volume_view.html


hope either of these methods help.
On 2019-03-08 9:44 p.m., ratshtron wrote:
below is a link to a page to download a
utility to use in a shortcut to execute line
commands in windows specifily to mute and
unmute the speakers on your computer. download
the version of nircmd.exe for your os be it a
32bit system or a 64bit system and place it in
your c:\windows\system32 folder and then
create a shortcut using this program with the
target looking something like this:

c:\windows\system32\nircmd.exe mutesysvolume 2

the last perameter of 2 is a toggle that will
mute and unmute every other time you execute
the shortcut. you can assign a keystroke to
the short by right clicking on the shortcut
created and tab to the shortcut key and assign
one. I assigned shift plus alt plus v. hope
this is clear enough and if someone else can explain it better please do so.


now the link to the web page to download the
program. O' it is a free utility.

http://www.nirsoft.net/utils/nircmd.html



Legend has it that on Wednesday 3/6/2019 08:42 PM, Jed Barton said:
----------------------------------------
Hey guys,

OK, just had a major problem.  I have no idea how i did it.
Fortunately someone was able to help me out of it, but i muted my
system volume.  Curious, when this happens, what is the keystroke to
hit with the latest jaws to unmute everything?

Thanks,
Jed
----------------------------------------


--


Curtis Delzer
HS
W B 6 H E F
Rialto, CA


----------------------------------------



--


Curtis Delzer
HS
W B 6 H E F
Rialto, CA


Re: Word skipping pages

Bill White <billwhite92701@...>
 

You must first go into advanced settings, and make sure that you check the check box which allows documents to open in draft view. Then draft view may be made the default in Word.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Zel Iscel
Sent: Saturday, March 9, 2019 9:00 PM
To: main@jfw.groups.io
Subject: Re: Word skipping pages

 

Thank you for your responses. The draft view works but I’m wondering now whether there’s a way to make it the default view in Word? Again I haven’t been able to locate it in the Word Options settings.

Thanks in advance

Zel

Zel Iscel

Inclusive World

Principle Consultant

 

Mobile: +61 0413813885

Email: zel@...


On 10 Mar 2019, at 9:43 am, Heather Thomas <heather.thomas@...> wrote:

Hello, 

It sounds like you were in a multiple page view. You could press Alt + w. Then numeral 1 to switch to a 1 page view.

-Heather


On Mar 9, 2019, at 7:15 PM, Bill White <billwhite92701@...> wrote:

Hi, Richard. Alt plus W followed by E sets the document for Draft View. ALT plus W, followed by L sets the document for Web Layout View.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Saturday, March 9, 2019 1:58 PM
To: main@jfw.groups.io
Subject: Re: Word skipping pages

 

I know alt+w opens the View menu.

What is the letter e supposed to do?

On my Word 2016, there is an item called Page Movement, but the hot key letter is c.

 

Richard

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Saturday, March 9, 2019 12:26 PM
To: main@jfw.groups.io
Subject: Re: Word skipping pages

 

Hi,

 

When the Word Document is open, hit alt +w and then e. This will allow scrolling page to page without skipping.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Zel Iscel
Sent: Saturday, March 9, 2019 1:19 PM
To: main@jfw.groups.io
Subject: Word skipping pages

 

Hi there,

 

I’ve just joined this group about 15 minutes ago so my apologies if this topic has been addressed before.

 

I’m using Windows 10 with Jaws 18 and am subscribed to Office 365. When I scroll through documents, I find that pages are skipped over – e.g I can end up on page 4 when I get to the end of page 1 using the down arrow. I’ve gone through the options in settings but haven’t found a solution yet.

 

Can anyone help?

 

Cheers

Zel

 

Virus-free. www.avast.com


Carroll Center for the Blind Confidentiality Notice:  This email and any files transmitted with it are confidential and are intended solely for the use of the individual(s) addressed in the message above.  This communication may contain sensitive or confidential information.  If you are not an intended recipient dissemination, forwarding, printing or copying of this email is strictly prohibited.  If you received this email in error and the email contains private information, please contact the Carroll Center Compliance Line at 617-969-6200 x. 214.  If the email was sent to you in error but does not contain private information, please contact the sender and delete the email.


Re: Word skipping pages

Zel Iscel
 

Thank you for your responses. The draft view works but I’m wondering now whether there’s a way to make it the default view in Word? Again I haven’t been able to locate it in the Word Options settings.
Thanks in advance
Zel

Zel Iscel
Inclusive World
Principle Consultant

Mobile: +61 0413813885
Email: zel@...

On 10 Mar 2019, at 9:43 am, Heather Thomas <heather.thomas@...> wrote:

Hello, 
It sounds like you were in a multiple page view. You could press Alt + w. Then numeral 1 to switch to a 1 page view.
-Heather


On Mar 9, 2019, at 7:15 PM, Bill White <billwhite92701@...> wrote:

Hi, Richard. Alt plus W followed by E sets the document for Draft View. ALT plus W, followed by L sets the document for Web Layout View.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Saturday, March 9, 2019 1:58 PM
To: main@jfw.groups.io
Subject: Re: Word skipping pages

 

I know alt+w opens the View menu.

What is the letter e supposed to do?

On my Word 2016, there is an item called Page Movement, but the hot key letter is c.

 

Richard

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Saturday, March 9, 2019 12:26 PM
To: main@jfw.groups.io
Subject: Re: Word skipping pages

 

Hi,

 

When the Word Document is open, hit alt +w and then e. This will allow scrolling page to page without skipping.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Zel Iscel
Sent: Saturday, March 9, 2019 1:19 PM
To: main@jfw.groups.io
Subject: Word skipping pages

 

Hi there,

 

I’ve just joined this group about 15 minutes ago so my apologies if this topic has been addressed before.

 

I’m using Windows 10 with Jaws 18 and am subscribed to Office 365. When I scroll through documents, I find that pages are skipped over – e.g I can end up on page 4 when I get to the end of page 1 using the down arrow. I’ve gone through the options in settings but haven’t found a solution yet.

 

Can anyone help?

 

Cheers

Zel

 

Virus-free. www.avast.com


Carroll Center for the Blind Confidentiality Notice:  This email and any files transmitted with it are confidential and are intended solely for the use of the individual(s) addressed in the message above.  This communication may contain sensitive or confidential information.  If you are not an intended recipient dissemination, forwarding, printing or copying of this email is strictly prohibited.  If you received this email in error and the email contains private information, please contact the Carroll Center Compliance Line at 617-969-6200 x. 214.  If the email was sent to you in error but does not contain private information, please contact the sender and delete the email.


Accessibility of Minitool Partition Wizard

Annabelle Susan Morison
 

Hi, it's Annabelle.
I'm trying out Minitool Partition Wizard, the only one I know where you can convert MBR to GPT and vise versa, as well as converting NTFS to FAT, Exfat, and the like, without formatting the partitions and having to face the possibility of data loss. However, It only seems like this software is halfway accessible with JAWS. Does anybody know of a way that it can be made fully accessible? In other words, I want to be able to point to a hard drive or device in the list using the arrow keys.


Re: Word skipping pages

Heather Thomas <heather.thomas@...>
 

Hello, 
It sounds like you were in a multiple page view. You could press Alt + w. Then numeral 1 to switch to a 1 page view.
-Heather


On Mar 9, 2019, at 7:15 PM, Bill White <billwhite92701@...> wrote:

Hi, Richard. Alt plus W followed by E sets the document for Draft View. ALT plus W, followed by L sets the document for Web Layout View.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Saturday, March 9, 2019 1:58 PM
To: main@jfw.groups.io
Subject: Re: Word skipping pages

 

I know alt+w opens the View menu.

What is the letter e supposed to do?

On my Word 2016, there is an item called Page Movement, but the hot key letter is c.

 

Richard

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Saturday, March 9, 2019 12:26 PM
To: main@jfw.groups.io
Subject: Re: Word skipping pages

 

Hi,

 

When the Word Document is open, hit alt +w and then e. This will allow scrolling page to page without skipping.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Zel Iscel
Sent: Saturday, March 9, 2019 1:19 PM
To: main@jfw.groups.io
Subject: Word skipping pages

 

Hi there,

 

I’ve just joined this group about 15 minutes ago so my apologies if this topic has been addressed before.

 

I’m using Windows 10 with Jaws 18 and am subscribed to Office 365. When I scroll through documents, I find that pages are skipped over – e.g I can end up on page 4 when I get to the end of page 1 using the down arrow. I’ve gone through the options in settings but haven’t found a solution yet.

 

Can anyone help?

 

Cheers

Zel

 

Virus-free. www.avast.com


Carroll Center for the Blind Confidentiality Notice:  This email and any files transmitted with it are confidential and are intended solely for the use of the individual(s) addressed in the message above.  This communication may contain sensitive or confidential information.  If you are not an intended recipient dissemination, forwarding, printing or copying of this email is strictly prohibited.  If you received this email in error and the email contains private information, please contact the Carroll Center Compliance Line at 617-969-6200 x. 214.  If the email was sent to you in error but does not contain private information, please contact the sender and delete the email.


Re: Creating a Website Using JAWS

Debbie April Yuille
 

Thanks.

 

Debbie

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Steve Nutt
Sent: Sunday, 10 March 2019 3:31 AM
To: main@jfw.groups.io
Subject: Re: Creating a Website Using JAWS

 

Hi Debbie,

 

Use a content management system, such as WordPress.  It does all the heavy lifting for you.

 

All the best


Steve

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Debbie April Yuille
Sent: 07 March 2019 08:42
To: main@jfw.groups.io
Subject: Creating a Website Using JAWS

 

Hi All

 

What is the best way to create a website using JAWS? I’ve quite an advance JAWS user but have never created a website before.

 

Thanks in advance for any help.

Debbie


Re: Outlook 2016 Question About Reading E-mail Fields

Tom Behler
 

Brian:

 

Thank you!

 

I turned off features coming soon, and my e-mail fields are now all back.

 

Why this messes with Jaws is beyond me, but it’s good to have the problem solved.

 

I guess I missed the previous thread where this was discussed.

 

When receiveing over 200 e-mails a day, sometimes things just get lost.

 

I’ll make a note of this fix for future reference.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Vogel
Sent: Saturday, March 9, 2019 4:21 PM
To: main@jfw.groups.io
Subject: Re: Outlook 2016 Question About Reading E-mail Fields

 

Shankar,

        You're correct, and Sieghard Weitzel gave what is acknowledged as "the correct answer:"

                        https://jfw.groups.io/g/main/message/67853

If you've deleted a topic from your inbox you can always search the group archive, https://jfw.groups.io/g/main/topics, and since this one is so recent the actual topic itself is still showing up on the first page of the archive.  You can use the regular browser/screen reader search function and find it if you search for "new bug".

--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

   Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, and wrong.

         ~ H.L. Mencken, AKA The Sage of Baltimore


Re: turning off announcement of...

Marty Hutchings
 

...Or when in a meeting with Zoom and you don't want to here the announcements when someone enters or leaves the meeting. Very good. This will be usefull to know. Thanks.



Love in Christ
Marty
For our struggle is not against flesh and blood, but against the rulers, against the powers, against the world forces of this darkness, against the spiritual forces of wickedness in the heavenly places.
Therefore, take up the full armor of God, so that you will be able to resist in the evil day, and having done everything, to stand firm.
Ephesians 6:12, 13

-----Original Message-----
From: Richard Turner
Sent: Saturday, March 09, 2019 3:43 PM
To: main@jfw.groups.io
Subject: Re: turning off announcement of...

Speech on demand silences Jaws until you press a key combination to read something specific, like insert+up-arrow to read the current line.
It is useful if you don't want jaws chattering away for no apparent reason, or when a screen is refreshing or a ticker item is changing value like during a download, or when streaming audio.
I use it mostly when streaming audio, especially if I am wanting to record that stream and don't want Jaws interrupting.
The command is insert+spacebar followed by s.
The same command puts it back to full speech.

HTH,
Richard


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Saturday, March 9, 2019 1:01 PM
To: main@jfw.groups.io
Subject: Re: turning off announcement of...

What is Speech on demand and when would one use it?



Love in Christ
Marty
For our struggle is not against flesh and blood, but against the rulers, against the powers, against the world forces of this darkness, against the spiritual forces of wickedness in the heavenly places.
Therefore, take up the full armor of God, so that you will be able to resist in the evil day, and having done everything, to stand firm.
Ephesians 6:12, 13
-----Original Message-----
From: Richard Turner
Sent: Saturday, March 09, 2019 12:18 PM
To: main@jfw.groups.io
Subject: Re: turning off announcement of...

OK.
I did not know that Jaws command.
I just had my wife check and the text is not on the screen, but obviously
Jaws speaks it.
Anyone can open any program using the mouse or touchpad however, even though
they cannot type.
So, perhaps a work around would be for him to put Jaws into Speech on demand
with insert+space then s, so unless they know a jaws command to read the
current line or to get it back to full speech, they wouldn't know what to
do.

Richard


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Saturday, March 9, 2019 10:10 AM
To: main@jfw.groups.io
Subject: Re: turning off announcement of...

no. you misunderstood the issue. when he presses insert+spacebar and l.


-------- Original Message --------
From: Richard Turner [mailto:richardturner42@outlook.com]
Sent: Saturday, March 9, 2019, 1:03 PM
To: main@jfw.groups.io
Subject: turning off announcement of...

If you are talking about the message about pressing control, alt, delete to
log on, yes it is shown on the screen.
When I lock my home computer with Windows-Key plus l, when I hit a key, the
password field pops up.
At work, they have it set that you have to press control-alt-delete to log
on and the message is shown as well as spoken.
If he used a password, someone knowing the keys to press wouldn't help them
unless they also know his password.

Richard


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Saturday, March 9, 2019 9:49 AM
To: main@jfw.groups.io
Subject: Re: turning off announcement of...

no. he just wants to prevent accidental potential disasters from happening
when he leaves the computer running for a while unattended, in case
something bumps a few keys, curious home members, etc.

does anyone know if this message actually displays on the screen when a key
is pressed after the keyboard is locked? I'm thinking it isn't.

-------- Original Message --------
From: Richard Turner [mailto:richardturner42@outlook.com]
Sent: Saturday, March 9, 2019, 10:58 AM
To: main@jfw.groups.io
Subject: turning off announcement of...

So, does he not use a password?

Richard


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Saturday, March 9, 2019 7:37 AM
To: main@jfw.groups.io
Subject: Re: turning off announcement of...

he just tried it but it didn't work. he made the entry in the default
dictionary and even unloaded/reloaded JAWS, and after the keyboard is
locked, the announcement of what to press is still spoken.

how would he split up the announcement as you specified? give an example
using this announcement he doesn't want.

-------- Original Message --------
From: Ben Humphreys [mailto:brhbrhbrh@gmail.com]
Sent: Saturday, March 9, 2019, 9:44 AM
To: main@jfw.groups.io
Subject: turning off announcement of...

Hi Mario,

One strategy is to use the JAWS Dictionary Manager to substitute a space for
the text that annoys you.

For example, here's one I find annoying and have added to my JAWS default
dictionary:
"Type the name of a program, folder, document, or Internet resource," to ""

When the messages are long, it's most reliable when you break them up into
smaller chunks.

The Speech History command is good for viewing what exactly is being spoken
so you can create a proper substitution in the JAWS Dictionary Manager.

Hope this helps,

Ben

At 12:49 PM 3/8/2019, you wrote:
my friend is using Windows 10 with JAWS 2018 and locks his keyboard
occasionally to prevent accidental presses of keys while he's not using it
for a while, and wants to know if there's a way to disable/turn off/suppress
the announcement on what to press to unlock the keyboard.
he looked at the quick settings but didn't find such a setting. he also
disabled the announcement of tutor messages, figuring the announcement might
be a tutor message, and did unload and reload JAWS, but the message was
still being announced. anyone have an idea?







.