Date   

moderated Re: OCR with HP office pro 8020

Glenn / Lenny
 

Apparently then Jaws and Open Book don't know how to tell the computer to
change WIFI connections for accessing the device.
Glenn

----- Original Message -----
From: "Pat Byrne" <k9jau@sbcglobal.net>
To: <main@jfw.groups.io>
Sent: Wednesday, December 23, 2020 1:09 PM
Subject: Re: OCR with HP office pro 8020


Glen,
There are no ports on the printer.
PateAt 10:36 AM 12/23/2020, you wrote:
Is it connecting directly via WIFI, or is the device connected to the
router
going through the network via the WIFI?
It may make a difference.
I've typically preferred to connect WIFI printers to the router and access
them through the network, instead of my computer having to negotiate
another
WIFI connection.
Some of these devices you can connect them either way, and turn off its
WIFI
and just plug it into the router.

Glenn
----- Original Message -----
From: "Pat Byrne" <k9jau@sbcglobal.net>
To: <main@jfw.groups.io>
Sent: Wednesday, December 23, 2020 10:22 AM
Subject: Re: OCR with HP office pro 8020


There is no direct connect Glen. Just wifi.
Pat ByrneAt 10:08 AM 12/23/2020, you wrote:
Is it connected directly, or through the network?

----- Original Message -----
From: "Ann Byrne" <annakb@sbcglobal.net>
To: <main@jfw.groups.io>
Sent: Wednesday, December 23, 2020 10:05 AM
Subject: Re: OCR with HP office pro 8020


I have done that. Both Openbook and JAWS acknowledge that they see
it, but nothing happens.
At 09:03 AM 12/23/2020, you wrote:
Hi Ann,

Have you selected HP as the scanner in Openbook? If not open OB and
press, Alt + A, to open the advanced menu, down arrow to, Device
selection and press enter.
You should now be on, Scanner, so tab 1 time into the list of
options, arrow up / down to select the one you want, then tab to,
Okay, and press enter.
Remember to save your settings.

Stay safe and take care. Mike.
----- Original Message -----
From: <mailto:annakb@sbcglobal.net>Ann Byrne
To: <mailto:main@jfw.groups.io>main@jfw.groups.io
Sent: Wednesday, December 23, 2020 6:08 AM
Subject: OCR with HP office pro 8020

So far I can't get JAWS OCR (or Openbook) to scan with the HP Office
pro 8020 all-in-one printer/scannner. Windows fax and scan works
with it with no problem, but although JAWS lists the scanner as a
source, says it is processing, gives no error message ... the scanner
just sits there doing nothing. Any clue how to make the stinker work?

Thanks,

Ann




















moderated Re: OCR with HP office pro 8020

Pat Byrne
 

Glen,
There are no ports on the printer.
PateAt 10:36 AM 12/23/2020, you wrote:

Is it connecting directly via WIFI, or is the device connected to the router
going through the network via the WIFI?
It may make a difference.
I've typically preferred to connect WIFI printers to the router and access
them through the network, instead of my computer having to negotiate another
WIFI connection.
Some of these devices you can connect them either way, and turn off its WIFI
and just plug it into the router.

Glenn
----- Original Message -----
From: "Pat Byrne" <k9jau@sbcglobal.net>
To: <main@jfw.groups.io>
Sent: Wednesday, December 23, 2020 10:22 AM
Subject: Re: OCR with HP office pro 8020


There is no direct connect Glen. Just wifi.
Pat ByrneAt 10:08 AM 12/23/2020, you wrote:
Is it connected directly, or through the network?

----- Original Message -----
From: "Ann Byrne" <annakb@sbcglobal.net>
To: <main@jfw.groups.io>
Sent: Wednesday, December 23, 2020 10:05 AM
Subject: Re: OCR with HP office pro 8020


I have done that. Both Openbook and JAWS acknowledge that they see
it, but nothing happens.
At 09:03 AM 12/23/2020, you wrote:
Hi Ann,

Have you selected HP as the scanner in Openbook? If not open OB and
press, Alt + A, to open the advanced menu, down arrow to, Device
selection and press enter.
You should now be on, Scanner, so tab 1 time into the list of
options, arrow up / down to select the one you want, then tab to,
Okay, and press enter.
Remember to save your settings.

Stay safe and take care. Mike.
----- Original Message -----
From: <mailto:annakb@sbcglobal.net>Ann Byrne
To: <mailto:main@jfw.groups.io>main@jfw.groups.io
Sent: Wednesday, December 23, 2020 6:08 AM
Subject: OCR with HP office pro 8020

So far I can't get JAWS OCR (or Openbook) to scan with the HP Office
pro 8020 all-in-one printer/scannner. Windows fax and scan works
with it with no problem, but although JAWS lists the scanner as a
source, says it is processing, gives no error message ... the scanner
just sits there doing nothing. Any clue how to make the stinker work?

Thanks,

Ann




















moderated Re: Trouble reading MS word documents

Shirley Tracy
 

I’m using JAWS 2021, but I’m thinking of sliding back into JAWS 2020 for this. Thanks.

 

 

 

Shirley Tracy

 

From: Adrian Spratt
Sent: Wednesday, December 23, 2020 12:31 PM
To: main@jfw.groups.io
Subject: Re: Trouble reading MS word documents

 

Shirley,

 

Which version of JAWS are you using? Although I haven’t had this experience with Word, I am experiencing something similar with Outlook emails that I draft. I find that reverting from JAWS 2021 to 2020 restores reliable reading.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shirley Tracy
Sent: Wednesday, December 23, 2020 11:53 AM
To: main@jfw.groups.io
Subject: Trouble reading MS word documents

 

Hello everyone,

 

Are any of you beginning to have trouble reading documents in MS Word? Or is it just me?

 

I wrote an important letter to a company a few days ago, and I was trying to read it today to make some changes before sending it. I had trouble simply reading line by line. Did something change? Or am I in The Twilight Zone?

 

Shirley Tracy

 

 


moderated Re: Scripts in default user disappeared and Jaws scripting mailing list

Leo
 

OK thanks!


Leo

“Pain is inevitable. Suffering is optional.”
― haruki murakami,
On 12/23/2020 11:33 AM, Cohn, Jonathan via groups.io wrote:

Hello,
It is possible that FS put script definitions in default.jsd that are not in default.jss. Default.jss does include several "use" statements that include code from other libraries. Also, the psd d files are used for the command to insert a function in code, and for the  verification that parameters are correctly listed for functions.
There is a JAWS scripting list on freelists. This list has most of the professional scripters on it, so they get impatient if people ask fairly simple questions. Also, if you ask can I get a script for Application X, nobody will answer.
Please try to search the archive of over 10 years of scripting history before asking a question.
Best of luck!
Jonathan Cohn
 


moderated Re: Scripts in default user disappeared and Jaws scripting mailing list

mike mcglashon
 

Block quote:

There is a JAWS scripting list on freelists. This list has most of the professional scripters on it, so they get impatient if people ask fairly simple questions. Also, if you ask can I get a script for Application X, nobody will answer.

Please try to search the archive of over 10 years of scripting history before asking a question.

End quote:

Wow!!!

This seems counter-intuitive;

That’s like saying there’s a freelist for doctors,

And,

If anyone comes on there asking for remedies,

They will become impatient;

It would seem to me that the scripters would take advantage of those of us who don’t know how to do it,

In order to make a living.

After all,

If I offer to purchase one’s services to make me a script,

Why wouldn’t they do it?

 

 

Please advise as you like.

 

Mike M.

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cohn, Jonathan via groups.io
Sent: Wednesday, December 23, 2020 12:33 PM
To: main@jfw.groups.io
Subject: Re: Scripts in default user disappeared and Jaws scripting mailing list

 

Hello,
It is possible that FS put script definitions in default.jsd that are not in default.jss. Default.jss does include several "use" statements that include code from other libraries. Also, the psd d files are used for the command to insert a function in code, and for the  verification that parameters are correctly listed for functions.
There is a JAWS scripting list on freelists. This list has most of the professional scripters on it, so they get impatient if people ask fairly simple questions. Also, if you ask can I get a script for Application X, nobody will answer.
Please try to search the archive of over 10 years of scripting history before asking a question.
Best of luck!
Jonathan Cohn
 


moderated Re: Scripts in default user disappeared and Jaws scripting mailing list

Cohn, Jonathan
 

Hello,
It is possible that FS put script definitions in default.jsd that are not in default.jss. Default.jss does include several "use" statements that include code from other libraries. Also, the psd d files are used for the command to insert a function in code, and for the  verification that parameters are correctly listed for functions.
There is a JAWS scripting list on freelists. This list has most of the professional scripters on it, so they get impatient if people ask fairly simple questions. Also, if you ask can I get a script for Application X, nobody will answer.
Please try to search the archive of over 10 years of scripting history before asking a question.
Best of luck!
Jonathan Cohn
 


moderated Re: Trouble reading MS word documents

Adrian Spratt
 

Shirley,

 

Which version of JAWS are you using? Although I haven’t had this experience with Word, I am experiencing something similar with Outlook emails that I draft. I find that reverting from JAWS 2021 to 2020 restores reliable reading.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shirley Tracy
Sent: Wednesday, December 23, 2020 11:53 AM
To: main@jfw.groups.io
Subject: Trouble reading MS word documents

 

Hello everyone,

 

Are any of you beginning to have trouble reading documents in MS Word? Or is it just me?

 

I wrote an important letter to a company a few days ago, and I was trying to read it today to make some changes before sending it. I had trouble simply reading line by line. Did something change? Or am I in The Twilight Zone?

 

Shirley Tracy

 


moderated Re: Trouble reading MS word documents

Van Lant, Robin
 

I havent’ had the issue lately, but definitely have had that before, especially after making edits.  You might try changing the view to Normal on the view ribbon to see if JAWS will refresh what it says.  I havent’ tried this, but also wonder if turning on Quick keys with Insert Z might give better results. 

 

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shirley Tracy
Sent: Wednesday, December 23, 2020 9:53 AM
To: main@jfw.groups.io
Subject: Trouble reading MS word documents

 

WARNING: This email originated externally. Exercise caution. Think before clicking links or opening attachments.

 

Hello everyone,

 

Are any of you beginning to have trouble reading documents in MS Word? Or is it just me?

 

I wrote an important letter to a company a few days ago, and I was trying to read it today to make some changes before sending it. I had trouble simply reading line by line. Did something change? Or am I in The Twilight Zone?

 

Shirley Tracy

 

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: Trouble reading MS word documents

Jasmine Kotsay
 

Hi, Shirley,
I have not noticed this, but when I try reading a document later, I will see what happens.

On Dec 23, 2020, at 8:53 AM, Shirley Tracy <shirleytracy16@...> wrote:



Hello everyone,

 

Are any of you beginning to have trouble reading documents in MS Word? Or is it just me?

 

I wrote an important letter to a company a few days ago, and I was trying to read it today to make some changes before sending it. I had trouble simply reading line by line. Did something change? Or am I in The Twilight Zone?

 

Shirley Tracy

 


moderated Re: OCR with HP office pro 8020

Richard Turner
 

Do you know if there is a twain driver installed? And if either Openbook or Jaws are using it?


Richard

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation in deep space, that I really wish I'd listened to what my mother told me when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

On Dec 23, 2020, at 8:35 AM, Glenn / Lenny <glennervin@cableone.net> wrote:

Is it connecting directly via WIFI, or is the device connected to the router
going through the network via the WIFI?
It may make a difference.
I've typically preferred to connect WIFI printers to the router and access
them through the network, instead of my computer having to negotiate another
WIFI connection.
Some of these devices you can connect them either way, and turn off its WIFI
and just plug it into the router.

Glenn
----- Original Message -----
From: "Pat Byrne" <k9jau@sbcglobal.net>
To: <main@jfw.groups.io>
Sent: Wednesday, December 23, 2020 10:22 AM
Subject: Re: OCR with HP office pro 8020


There is no direct connect Glen. Just wifi.
Pat ByrneAt 10:08 AM 12/23/2020, you wrote:
Is it connected directly, or through the network?

----- Original Message -----
From: "Ann Byrne" <annakb@sbcglobal.net>
To: <main@jfw.groups.io>
Sent: Wednesday, December 23, 2020 10:05 AM
Subject: Re: OCR with HP office pro 8020


I have done that. Both Openbook and JAWS acknowledge that they see
it, but nothing happens.
At 09:03 AM 12/23/2020, you wrote:
Hi Ann,

Have you selected HP as the scanner in Openbook? If not open OB and
press, Alt + A, to open the advanced menu, down arrow to, Device
selection and press enter.
You should now be on, Scanner, so tab 1 time into the list of
options, arrow up / down to select the one you want, then tab to,
Okay, and press enter.
Remember to save your settings.

Stay safe and take care. Mike.
----- Original Message -----
From: <mailto:annakb@sbcglobal.net>Ann Byrne
To: <mailto:main@jfw.groups.io>main@jfw.groups.io
Sent: Wednesday, December 23, 2020 6:08 AM
Subject: OCR with HP office pro 8020

So far I can't get JAWS OCR (or Openbook) to scan with the HP Office
pro 8020 all-in-one printer/scannner. Windows fax and scan works
with it with no problem, but although JAWS lists the scanner as a
source, says it is processing, gives no error message ... the scanner
just sits there doing nothing. Any clue how to make the stinker work?

Thanks,

Ann






















moderated Scripts in default user disappeared and Jaws scripting mailing list

Leo
 

Hello everyone,

I got a couple of questions. Firstly, when I’m in the Jaws script manager, specifically in the default script, and I list all the scripts in the default user by using the combination control plus L,  after doing so, I look for the script where I want to move the focus of the cursor, so I push enter, but always that I do it, a message pops up, saying that the script is present in the .JSD documentation file, but the script is not present in the default.JSS file.  I know the scripts are working perfectly because everything  is working just fine, except for this. So, how can I access the scripts in the default.JSS file?

 

Secondly, is there any active mailing list for Jaws scripting?

 

 

 

 

 

--
Leo

“Pain is inevitable. Suffering is optional.”
― haruki murakami,


moderated Trouble reading MS word documents

Shirley Tracy
 

Hello everyone,

 

Are any of you beginning to have trouble reading documents in MS Word? Or is it just me?

 

I wrote an important letter to a company a few days ago, and I was trying to read it today to make some changes before sending it. I had trouble simply reading line by line. Did something change? Or am I in The Twilight Zone?

 

Shirley Tracy

 


moderated Re: OCR with HP office pro 8020

Glenn / Lenny
 

Is it connecting directly via WIFI, or is the device connected to the router
going through the network via the WIFI?
It may make a difference.
I've typically preferred to connect WIFI printers to the router and access
them through the network, instead of my computer having to negotiate another
WIFI connection.
Some of these devices you can connect them either way, and turn off its WIFI
and just plug it into the router.

Glenn

----- Original Message -----
From: "Pat Byrne" <k9jau@sbcglobal.net>
To: <main@jfw.groups.io>
Sent: Wednesday, December 23, 2020 10:22 AM
Subject: Re: OCR with HP office pro 8020


There is no direct connect Glen. Just wifi.
Pat ByrneAt 10:08 AM 12/23/2020, you wrote:
Is it connected directly, or through the network?

----- Original Message -----
From: "Ann Byrne" <annakb@sbcglobal.net>
To: <main@jfw.groups.io>
Sent: Wednesday, December 23, 2020 10:05 AM
Subject: Re: OCR with HP office pro 8020


I have done that. Both Openbook and JAWS acknowledge that they see
it, but nothing happens.
At 09:03 AM 12/23/2020, you wrote:
Hi Ann,

Have you selected HP as the scanner in Openbook? If not open OB and
press, Alt + A, to open the advanced menu, down arrow to, Device
selection and press enter.
You should now be on, Scanner, so tab 1 time into the list of
options, arrow up / down to select the one you want, then tab to,
Okay, and press enter.
Remember to save your settings.

Stay safe and take care. Mike.
----- Original Message -----
From: <mailto:annakb@sbcglobal.net>Ann Byrne
To: <mailto:main@jfw.groups.io>main@jfw.groups.io
Sent: Wednesday, December 23, 2020 6:08 AM
Subject: OCR with HP office pro 8020

So far I can't get JAWS OCR (or Openbook) to scan with the HP Office
pro 8020 all-in-one printer/scannner. Windows fax and scan works
with it with no problem, but although JAWS lists the scanner as a
source, says it is processing, gives no error message ... the scanner
just sits there doing nothing. Any clue how to make the stinker work?

Thanks,

Ann













moderated Re: OCR with HP office pro 8020

Pat Byrne
 

There is no direct connect Glen. Just wifi.
Pat ByrneAt 10:08 AM 12/23/2020, you wrote:

Is it connected directly, or through the network?

----- Original Message -----
From: "Ann Byrne" <annakb@sbcglobal.net>
To: <main@jfw.groups.io>
Sent: Wednesday, December 23, 2020 10:05 AM
Subject: Re: OCR with HP office pro 8020


I have done that. Both Openbook and JAWS acknowledge that they see
it, but nothing happens.
At 09:03 AM 12/23/2020, you wrote:
Hi Ann,

Have you selected HP as the scanner in Openbook? If not open OB and
press, Alt + A, to open the advanced menu, down arrow to, Device
selection and press enter.
You should now be on, Scanner, so tab 1 time into the list of
options, arrow up / down to select the one you want, then tab to,
Okay, and press enter.
Remember to save your settings.

Stay safe and take care. Mike.
----- Original Message -----
From: <mailto:annakb@sbcglobal.net>Ann Byrne
To: <mailto:main@jfw.groups.io>main@jfw.groups.io
Sent: Wednesday, December 23, 2020 6:08 AM
Subject: OCR with HP office pro 8020

So far I can't get JAWS OCR (or Openbook) to scan with the HP Office
pro 8020 all-in-one printer/scannner. Windows fax and scan works
with it with no problem, but although JAWS lists the scanner as a
source, says it is processing, gives no error message ... the scanner
just sits there doing nothing. Any clue how to make the stinker work?

Thanks,

Ann













moderated Re: OCR with HP office pro 8020

Glenn / Lenny
 

Is it connected directly, or through the network?

----- Original Message -----
From: "Ann Byrne" <annakb@sbcglobal.net>
To: <main@jfw.groups.io>
Sent: Wednesday, December 23, 2020 10:05 AM
Subject: Re: OCR with HP office pro 8020


I have done that. Both Openbook and JAWS acknowledge that they see
it, but nothing happens.
At 09:03 AM 12/23/2020, you wrote:
Hi Ann,

Have you selected HP as the scanner in Openbook? If not open OB and
press, Alt + A, to open the advanced menu, down arrow to, Device
selection and press enter.
You should now be on, Scanner, so tab 1 time into the list of
options, arrow up / down to select the one you want, then tab to,
Okay, and press enter.
Remember to save your settings.

Stay safe and take care. Mike.
----- Original Message -----
From: <mailto:annakb@sbcglobal.net>Ann Byrne
To: <mailto:main@jfw.groups.io>main@jfw.groups.io
Sent: Wednesday, December 23, 2020 6:08 AM
Subject: OCR with HP office pro 8020

So far I can't get JAWS OCR (or Openbook) to scan with the HP Office
pro 8020 all-in-one printer/scannner. Windows fax and scan works
with it with no problem, but although JAWS lists the scanner as a
source, says it is processing, gives no error message ... the scanner
just sits there doing nothing. Any clue how to make the stinker work?

Thanks,

Ann






moderated Re: OCR with HP office pro 8020

Ann Byrne
 

I have done that. Both Openbook and JAWS acknowledge that they see it, but nothing happens.

At 09:03 AM 12/23/2020, you wrote:
Hi Ann,

Have you selected HP as the scanner in Openbook? If not open OB and press, Alt + A, to open the advanced menu, down arrow to, Device selection and press enter.
You should now be on, Scanner, so tab 1 time into the list of options, arrow up / down to select the one you want, then tab to, Okay, and press enter.
Remember to save your settings.

Stay safe and take care. Mike.
----- Original Message -----
From: <mailto:annakb@sbcglobal.net>Ann Byrne
To: <mailto:main@jfw.groups.io>main@jfw.groups.io
Sent: Wednesday, December 23, 2020 6:08 AM
Subject: OCR with HP office pro 8020

So far I can't get JAWS OCR (or Openbook) to scan with the HP Office
pro 8020 all-in-one printer/scannner. Windows fax and scan works
with it with no problem, but although JAWS lists the scanner as a
source, says it is processing, gives no error message ... the scanner
just sits there doing nothing. Any clue how to make the stinker work?

Thanks,

Ann






moderated Re: how to get rid of Edge in start up?

Glenn / Lenny
 

I use windows 7, and it seems to me that this was different in windows 10
some time back, as I've used task manager in windows 10, and other than the
startup tab, it seemed like the task manager in windows 7.
Glenn

----- Original Message -----
From: "Mario" <mrb620@hotmail.com>
To: <main@jfw.groups.io>
Sent: Wednesday, December 23, 2020 8:54 AM
Subject: Re: how to get rid of Edge in start up?


to get access to the various tabs such as the processes, CPU, startup,
etc, press space bar on the more details button.

-------- Original Message --------
From: Dave Durber [mailto:d.durber@gmail.com]
To: <main@jfw.groups.io>
Date: Wednesday, December 23, 2020, 12:00 AM
Subject: how to get rid of Edge in start up?
Glen:
I pressed CTRL+SHIFT+ESC, to start Task Manager, JAWS says, "Task
Manager, list of items, list box. When I pressed CTRL+TAB, nothing happenes.
Any other suggestions?
Dave
----- Original Message -----

*From:* Glenn / Lenny <mailto:glennervin@cableone.net>
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Sent:* Saturday, December 19, 2020 7:10 PM
*Subject:* Re: how to get rid of Edge in start up?

Hi Stan,
Call up task manager with shift control + escape and control tab to
the startup tab and uncheck it.
Assuming you are using windows 10.
In 7, you need to run a utility called msconfig with the run edit
box which you get with windows + R.
HTH.
Glenn
----- Original Message -----
*From:* Stan Holdeman <mailto:sholdeman@msn.com>
*To:* JFW list (main@jfw.groups.io) <mailto:main@jfw.groups.io)>
*Sent:* Saturday, December 19, 2020 1:03 PM
*Subject:* how to get rid of Edge in start up?

Dear List: I am running J 2021 and Google Chrome is my default browser.

Edge and a site called personal Microsoft comes up frequently at
start up. Seems to slow up start up quite a bit.

How do I get rid of this intrusion?

Stan


moderated Re: OCR with HP office pro 8020

Mike B
 

Hi Ann,
 
Have you selected HP as the scanner in Openbook?  If not open OB and press, Alt + A, to open the advanced menu, down arrow to, Device selection and press enter.
You should now be on, Scanner, so tab 1 time into the list of options, arrow up / down to select the one you want, then tab to, Okay, and press enter.
Remember to save your settings.

Stay safe and take care.  Mike.

----- Original Message -----
From: Ann Byrne
Sent: Wednesday, December 23, 2020 6:08 AM
Subject: OCR with HP office pro 8020

So far I can't get JAWS OCR (or Openbook) to scan with the HP Office
pro 8020 all-in-one printer/scannner.  Windows fax and scan works
with it with no problem, but although JAWS lists the scanner as a
source, says it is processing, gives no error message ... the scanner
just sits there doing nothing.  Any clue how to make the stinker work?

Thanks,

Ann






moderated Re: how to get rid of Edge in start up?

Mario
 

to get access to the various tabs such as the processes, CPU, startup, etc, press space bar on the more details button.

-------- Original Message --------
From: Dave Durber [mailto:d.durber@gmail.com]
To: <main@jfw.groups.io>
Date: Wednesday, December 23, 2020, 12:00 AM
Subject: how to get rid of Edge in start up?
Glen:
I pressed CTRL+SHIFT+ESC, to start Task Manager, JAWS says, "Task
Manager, list of items, list box. When I pressed CTRL+TAB, nothing happenes.
Any other suggestions?
Dave
----- Original Message -----

*From:* Glenn / Lenny <mailto:glennervin@cableone.net>
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Sent:* Saturday, December 19, 2020 7:10 PM
*Subject:* Re: how to get rid of Edge in start up?

Hi Stan,
Call up task manager with shift control + escape and control tab to
the startup tab and uncheck it.
Assuming you are using windows 10.
In 7, you need to run a utility called msconfig with the run edit
box which you get with windows + R.
HTH.
Glenn
----- Original Message -----
*From:* Stan Holdeman <mailto:sholdeman@msn.com>
*To:* JFW list (main@jfw.groups.io) <mailto:main@jfw.groups.io)>
*Sent:* Saturday, December 19, 2020 1:03 PM
*Subject:* how to get rid of Edge in start up?

Dear List: I am running J 2021 and Google Chrome is my default browser.

Edge and a site called personal Microsoft comes up frequently at
start up. Seems to slow up start up quite a bit.

How do I get rid of this intrusion?

Stan


moderated Re: OCR with HP office pro 8020

Ann Byrne
 

Installed HP smart, which is virtually inaccessible. It might have installed additional drivers, thogh. the scanner works with it, but JAWS doesn't see the controls.

At 08:30 AM 12/23/2020, you wrote:
Did you try installing the associated HP software?
That may open it for use by other devices by properly installing a needed
driver.
Glenn
----- Original Message -----
From: "Ann Byrne" <annakb@sbcglobal.net>
To: <main@jfw.groups.io>
Sent: Wednesday, December 23, 2020 8:08 AM
Subject: OCR with HP office pro 8020


So far I can't get JAWS OCR (or Openbook) to scan with the HP Office
pro 8020 all-in-one printer/scannner. Windows fax and scan works
with it with no problem, but although JAWS lists the scanner as a
source, says it is processing, gives no error message ... the scanner
just sits there doing nothing. Any clue how to make the stinker work?

Thanks,

Ann








2081 - 2100 of 86962