|
JAWS and Goldwave presets
Mario
I'm using the latest version of Goldwave with JAWS 2018 on Windows 7:
whenever I navigate to any effect I want to test out on a sound file, JAWS does not read the names of the presets as I down arrow but the preset does activated when pressing F4 to preview the result, but then don't know what preset I'm testing out. however, the only way I can get JAWS to announce the name is to press alt+down arrow, arrow down or up to a preset, press alt+up arrow, and press F4. this gets rather tedious after doing it for a few times. in other instances where I can adjust a setting for the preset and where I can type a value instead of arrowing to change the value, JAWS remains silent when pressing the down or up arrows. I have emailed Jim Grimsby and it was established that the scripts are at least loading properly but something is still not right because my problem persists, and he is unable to Tandem at this time to investigate and fix my problem. does anyone have an idea as to what to do to either troubleshoot and/or fix my problem, or have the email address of Gary Campbell, Jim Bowers, Jitendra and/or Ramkumar?
|
|
|
|
Re: Does anybody use word press with jars?
Paul Hunt <prhunt1@...>
Hello David. I would appreciate it if you would pass along links to the tutorials that you found particularly helpful. Thanks so much.
On Sep 29, 2018, at 12:24 AM, David Moore <jesusloves1966@...> wrote:
|
|
|
|
Re: Figured work-around for JAWS beta for 40-minute mode
Mário Navarro
Yes, absolutely right. cheers. Às 12:05 de 29/09/2018, Joseph Norton
escreveu:
-- A acção pode nem sempre ser felicidade, mas não há felicidade sem acção...
|
|
|
|
Figured work-around for JAWS beta for 40-minute mode
Joseph Norton
Hi listers:
A few days ago, a list member had trouble using JAWS Beta in 40-minute mode.
The problem was that JAWS was saying a corporate license file was needed. When selecting “OK” on this button, JAWS would close.
It turns out that this problem only occurs if you select the checkbox to not show the authorization dialog at startup.
So, when you first install the beta on a system not authorized for JAWS, you can still run it in 40-minute mode, but, you should not check the box that says “do not show this dialog again” at startup. Each time you start the beta, you will need to hit the button “Continue in 40-minute mode” (by pressing alt-C) at startup.
I have reported this on the beta report form.
Hope this helps.
Sent from Mail for Windows 10
|
|
|
|
Re: Does anybody use word press with jars?
David Moore
Yes, Word Press is very accessible with JAWS. I have my own blog that I am setting up right now. There are great tutorials on line, and JAWS works very well with the free: David Moore
Sent from Mail for Windows 10
From: Jim Portillo
Sent: Saturday, September 29, 2018 1:11 AM To: main@jfw.groups.io Subject: Does anybody use word press with jars?
Hello,
Does anyone here use Wordpress with their computer and Jaws? I also read that there are tutorials to use it, but again, I don’t know if that’s using it with jaws. Could I get some information from you guys on how well it works and whether or not I can start a blog?
Jim
7!
|
|
|
|
Email
Don Walls
Brian, thanks for the link to information about Windows Mail.
Something odd happens occasionally. Usually my system says "Windows Live Mail," but now and then it says "Outlook Express." I'm puzzled. Any thoughts? I am using Windows 10 and JAWS 17. Don
|
|
|
|
Does anybody use word press with jars?
Jim Portillo
Hello,
Does anyone here use Wordpress with their computer and Jaws? I also read that there are tutorials to use it, but again, I don’t know if that’s using it with jaws. Could I get some information from you guys on how well it works and whether or not I can start a blog? Jim Sent from my iPhone 7!
|
|
|
|
Re: need a visio 2016 trial download and setup file
Dave...
No
toggle quoted messageShow quoted text
Dave
On Sep 28, 2018, at 6:37 PM, Marvin Hunkin via Groups.Io <neilmarvin@...> wrote:
Hi. do you have the setup file and for some stupid reason when trying to set up, would not let me create an account, did not like the company name and then would not do that on google chrome, then tried firefox and would not like the company phone and did get that, and then would not call my landline. Do you have a trial version and where I can download the setup, from one drive. Thanks.
|
|
|
|
need a visio 2016 trial download and setup file
Marvin Hunkin <neilmarvin@...>
Hi. do you have the setup file and for some stupid reason when trying to set up, would not let me create an account, did not like the company name and then would not do that on google chrome, then tried firefox and would not like the company phone and did get that, and then would not call my landline. Do you have a trial version and where I can download the setup, from one drive. Thanks.
|
|
|
|
Re: labeling buttons on webpage
Bill White
toggle quoted messageShow quoted text
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Friday, September 28, 2018 12:34 PM To: main@jfw.groups.io Subject: Re: labeling buttons on webpage
Hi bill: I tried the key combination ctrl+jaws+tab and it brought me to the label box that I saw whenst I pressed jaws+f2? Is there some other combination for prompting?
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
You shouldn’t need to do that. There’s also another function in JAWS which might work in your situation.
Creating a Prompt
To create a prompt:
Move to the control for which the prompt is not properly spoken. Press CTRL+INSERT+TAB. A dialog box appears to walk you through the creation of the prompt. On the first page, enter the prompt for the control as you want JAWS to speak it, and then select Next. On the second page, enter the prompt for the control as you want JAWS to display it in Braille, and then select Next. On the third page, specify a Tutor message to provide assistance with navigation or the use of this control. If you leave the Tutor message blank, the default message is used. Select Finish to create your prompt.
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Ok, do I have to restart jaws, or, reload the webpage for it to recognize the new labels?
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
It should label the button as a Personal Web setting, and should work with the Virtual cursor as well as JAWS cursor.
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
thanks Bill for the prompt response.
contact information
|
|
|
|
Re: labeling buttons on webpage
mike mcglashon
Hi bill: I tried the key combination ctrl+jaws+tab and it brought me to the label box that I saw whenst I pressed jaws+f2? Is there some other combination for prompting?
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Thursday, September 27, 2018 5:35 PM To: main@jfw.groups.io Subject: Re: labeling buttons on webpage
You shouldn’t need to do that. There’s also another function in JAWS which might work in your situation.
Creating a Prompt
To create a prompt:
Move to the control for which the prompt is not properly spoken. Press CTRL+INSERT+TAB. A dialog box appears to walk you through the creation of the prompt. On the first page, enter the prompt for the control as you want JAWS to speak it, and then select Next. On the second page, enter the prompt for the control as you want JAWS to display it in Braille, and then select Next. On the third page, specify a Tutor message to provide assistance with navigation or the use of this control. If you leave the Tutor message blank, the default message is used. Select Finish to create your prompt.
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Ok, do I have to restart jaws, or, reload the webpage for it to recognize the new labels?
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
It should label the button as a Personal Web setting, and should work with the Virtual cursor as well as JAWS cursor.
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
thanks Bill for the prompt response.
contact information
|
|
|
|
Re: Accessing attachments in outlook 2016
Kimber Gardner
Thank you Bill, it looks like that is exactly what I needed to do.
toggle quoted messageShow quoted text
Once attachment preview was turned off I was able to tab to my attachments in both the emails where I was failing before. Kim
On 9/28/18, Bill White <billwhite92701@...> wrote:
Hi, Kim. One thing you want to make sure of is that "turn off Attachment --
Kimberly
|
|
|
|
Re: Accessing attachments in outlook 2016
Bill White
Hi, Kim. One thing you want to make sure of is that "turn off Attachment Preview is checked. This is in Outlook Options under Trust Center. Once you open Trust Center, press ALT plus T for Trust Center Settings. Arrow to Attachment Handling, then TAB to the Turn Off Attachment Preview, make sure it is checked, then TAB to the OK button in Trust center.
toggle quoted messageShow quoted text
Having Attachment Preview turned off makes it easier to Right and Left Arrow through your list of attachments. If you feel more comfortable with someone on the phone with you while you explore these options, you may call me between nine AM and nine PM Pacific Time. My number is: 714-835-6295 Bill White billwhite92701@...
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kimber Gardner Sent: Friday, September 28, 2018 3:58 AM To: main@jfw.groups.io Subject: Re: Accessing attachments in outlook 2016 Hi Ann, Unfortunately, in this case, insert A doesn't work. When I press insert A Jaws says "no attachments" even though I know for a fact that there are attachments. I tried this on several emails and never was able to reach the attachments. Thanks, Kim On 9/27/18, Ann Byrne <annakb@...> wrote: Insert+a shows the list of attachments. Tab to the 'open' button and -- Kimberly
|
|
|
|
Re: Problem when switching to a folder in Outlook 2016
Richard Turner
When closing an Email, you ought to be back in the inbox. Perhaps on that issue, calling Microsoft accessibility to figure out what setting is causing you to not be back in the inbox would be worth while. But, there are standard Microsoft hotkeys to switch between folders: Control_1 inbox Control-2 Calendar Control-3 contacts Control-4 ToDo list Control-5 Notes
Microsoft accessibility 800-936-5900.
HTH, Richard
“Definition of an expert: An ex is a has-been and a spirt is a drip under pressure.” – Bruce U. Utah Phillips
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
Stan Holdeman
Sent: Friday, September 28, 2018 7:19 AM To: main@jfw.groups.io Subject: Re: Problem when switching to a folder in Outlook 2016
Kevin: shift control I takes me to the inbox.
Stan
From: main@jfw.groups.io <main@jfw.groups.io>
On Behalf Of Kevin Meyers
Hello, I’m using windows10, Jaws2018 and Outlook2016. There are times I will switch to a folder to look at an email. I read the email and press the escape key when done to get out of the email. I then press F6 to bring up the folder list. I then try to move back to the inbox and the cursor is sitting on the inbox folder. Yet once I press the enter key it doesn’t go in. This usually happens when I went into the delete folder and then go back to the inbox. I then have to exit Outlook and come back in. This doesn’t all the time. Any suggestions? Kevin
Kevin Meyers – motivational speaker 6100 West Stonehedge Drive Suite 148C Greenfield, WI 53220 312-625-7710
|
|
|
|
Re: Problem when switching to a folder in Outlook 2016
Stan Holdeman
Kevin: shift control I takes me to the inbox.
Stan
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
Kevin Meyers
Sent: Friday, September 28, 2018 9:09 AM To: jfw@groups.io Subject: Problem when switching to a folder in Outlook 2016
Hello, I’m using windows10, Jaws2018 and Outlook2016. There are times I will switch to a folder to look at an email. I read the email and press the escape key when done to get out of the email. I then press F6 to bring up the folder list. I then try to move back to the inbox and the cursor is sitting on the inbox folder. Yet once I press the enter key it doesn’t go in. This usually happens when I went into the delete folder and then go back to the inbox. I then have to exit Outlook and come back in. This doesn’t all the time. Any suggestions? Kevin
Kevin Meyers – motivational speaker 6100 West Stonehedge Drive Suite 148C Greenfield, WI 53220 312-625-7710
|
|
|
|
Re: Accessing attachments in outlook 2016
Kimber Gardner
Yeah, I think that is what I'm seeing. Ah well, I guess I'm stuck with
toggle quoted messageShow quoted text
save all attachments. Thanks anyway.
On 9/28/18, Kimber Gardner <kimbersinbox1963@...> wrote:
Hi Ann, --
Kimberly
|
|
|
|
Problem when switching to a folder in Outlook 2016
Kevin Meyers <kevinmeyers@...>
Hello, I’m using windows10, Jaws2018 and Outlook2016. There are times I will switch to a folder to look at an email. I read the email and press the escape key when done to get out of the email. I then press F6 to bring up the folder list. I then try to move back to the inbox and the cursor is sitting on the inbox folder. Yet once I press the enter key it doesn’t go in. This usually happens when I went into the delete folder and then go back to the inbox. I then have to exit Outlook and come back in. This doesn’t all the time. Any suggestions? Kevin
Kevin Meyers – motivational speaker 6100 West Stonehedge Drive Suite 148C Greenfield, WI 53220 312-625-7710
|
|
|
|
Re: labeling buttons on webpage
Steve Nutt
Hi Bill,
Handy Tip: Instead of F2 and arrowing down to custom labels, just focus on the item and press Control+Insert+Tab.
All the best
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: 27 September 2018 19:49 To: main@jfw.groups.io Subject: Re: labeling buttons on webpage
Hi, Mike.
How to Make Custom Labels
This is appropriate for labeling buttons.
1. Put focus on the item you want to label. 2. Press jaws + F2. 3. Arrow to custom label. This will open a window that allows you to assign a label that makes sense.
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Hey guys: I seem to remember that there was a thread on here regarding labeling “unlabeled 0” buttons on webpages? Is there a way to have jaws say something else whenst I figure out what the button does?
Mike mcglashon Email: Michael.mcglashon@... Ph: 618 783 9331
|
|
|
|
Re: Accessing attachments in outlook 2016
Ann Byrne
Maybe try the touch cursor????
toggle quoted messageShow quoted text
At 05:58 AM 9/28/2018, you wrote:
Hi Ann,
|
|
|
|
Re: Accessing attachments in outlook 2016
Ann Byrne
you should be able to shift-tab once while in the message and land on the attachments. If insert+a doesn't work, though, shift+tab probably doesn't either. There is a way that people attach files so you can't get to them with JAWS. Ugh!
toggle quoted messageShow quoted text
At 05:58 AM 9/28/2018, you wrote:
Hi Ann,
|
|
|
