after you open goldwave... unload and reload jaws. i have to do this every time but it works. -- Dennis Cornelison Virus-free. www.avast.com

if it turns out to be that the issue is caused by Eloquence, what can one do about it besides using a different voice?

Well, Mike B. sent steps to try to get the Script version, but all it did was show me that the scripts were not loading the way I thought they were. I copied them to the appdata roaming, etc., folder

Hi, I am only guessing at this but... Check to see if you have the authorization set. You may be on the demo mode. Also, check to see if it is an elequence issue.

Hi all, I'm running JAWS 2018 on a Lenovo laptop running Windows 10. This is one of two identical machines I have for work. The machine used to work fine. However, JAWS now stops speaking after

Hi. Had to repair all my vocaliser voices, and when I change from eloquence say to kate, get the ava voice, then have to then launch the English kate voice again. How to fix. Have not tried the other

There was enough in your message to find and uncheck the correct box. I believe this has been the fix. Thanks and if you know about the delay when hitting control +r to respond, as previously

Sory I copied and pasted and it was all selected but it must of not pasted all. Just go to the ribbons and over to the search field and type in desktop notifications for email and you will find it

George, the ending of your note is missing. what's the missing verbage?

Hi, I did the change and will wait to see if still an issue. Another concern I've noticed. When I respond to a message, for a moment of at least 5-10 seconds, all freezes from the speech side. Then

Here you go; 1.Select File > Options > Mail. 2.Under Message arrival, select or clear the Display a Desktop Alert check box and then select OK. Note: To suppress or enable other notifications

Hi, Not sure. Some messages are short and reads the entire message. I have not checked to see if an entire email is read. However, it is not simply reading a subject line. The material being read is

Hi, Does it read the entire mail or just a couple of lines? Dan

Hi, Mario. When you "run" a file, you are running it online from Freedom Scientific instead of having the file yourself. If there should be a glitch on the Internet, you may end up with a file which

Hi all, Yesterday I finally upgraded my Office Suite from 2010 to the recent 2019. The install went easy and the importing of email was also without too many headaches. However, I notice that when

well, I don't know what's wrong. the scripts worked just fine when I had JAWS 16 and 18. I had done a repair on 2018 but the problem remains. Richard, are the scripts that you have version 2.0 or

if you're wanting to install 2019, I think the offline installer will have the OCR component included. make sure you save the offline installer.

I don't think there is a way to access that notification like there was in Internet Explorer, but often, if the dialog has buttons that warrant a response, the buttons will often have a keyboard

-- from, mack my concern is, that the OCR won't install correctly if jaws is installed offline, thanks.

I agree with Bill, but I'm curious as to why? hoping to get explanations from any listers.