You may want to call Humanware support. Richard 🖖 Live long and prosper Check out my web site at: www.turner42.com

I can't find update with JAWS cursor. Maria Campbelllucky1inct@...All that is necessary for evil to triumph is for good people to do nothing. On 1/18/2020 5:03 PM, david wrote:

Hi, Is the communication port set to bluetooth In the jaws settings? To check: Go to jaws, options, braille 2. Choose your braille note and go to modify 3. Ensure bluetooth is chosen as the

Woowoo, thanks so much. BOB SOUTAR.ONWARD THRU THE FOG

If I understand your question correctly, you could search for a paragraph mark and replace it with two paragraph marks. Thus: Control-h for search and replace. Type ^p in the search field. ^ is

Hi, I don’t know if there’s a driver, but I do know that I don’t want to use USB, because that would charge the unit, and the battery isn’t low. What else can I try? Thanks,

Are you connecting over bluetooth? Windows is notoriously bad with bluetooth. Was there a driver that you installed for the Touch? Did you try rebooting while the Touch is connected via

Hi, I have a large doc to which I need to add another line between paragraphs. Is there an easy way to do this? BOB SOUTAR.ONWARD THRU THE FOG

HI have a braillenote touch+, and a windows pc running windows 10 and jaws 2020. I’ve managed to pair the braillenote to the computer but when I attempt to connect it to jaws, my display says,

well, what I did was; 1, start menu key takes you to the windows search edit, type in options, you should find/see the Logitech app, press enter, now, wait a few seconds for the app to load,

No, it cannot. Both Logitech software updates and any firmware updates to the keyboard and/or unifying receiver have to be done via the Logitecch Options software. But it is not a lengthy process and

Could this be done in Device manager? Take care. Mike. Sent from my iBarstool.

You will most likely need help with that Logitech Options update. You can simply open Logitech Options and the update notice should be there, I also had a firmware update for my keyboard and unifying

Hi Tom, Try the following: 1. Open the, Ease of access center, from the control panel or from the search field. 2. Tab to, use the computer without a display link, and press enter. 3. Tab to

Hello, everyone. Within the last day or so, whenever I turn on my computer, I get a Logitec pop-up that wants me to install an update of some kind. However, within a few seconds from when Jaws

Er, no. On multiple machines. It opens it in a new tab, not a new window. -- Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363 Tolerance is the positive and cordial effort to understand

Shift-enter opens the link in a new window -- at least in Chrome. Brian Vogel wrote: -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John

This does work for me but another way, provided you do not have virtual ribbons enabled the following works. 1. Select and copy text as normal. 2. Now press alt, followed by e followed by s and you

Definitely true in all Chromium-based browsers and others (definitely Firefox). That being said, this does not cause any link to open in a separate browser window, but just a different tab. As

It is probably in protected view. To get it out of protected view hit F6 and it will talk about being sure the document came from a trusted source. Tab one time and you should hear enable editing. Hit