|
Re: [Bulk] Removing Older Versions of JFW
HI
I often switch between Jaws 12 and 7. Jaws 7 can fill out forms that can't
be filled by any other version, or at least I don't know how to do it. I
have short cut keys so it isn't
HI
I often switch between Jaws 12 and 7. Jaws 7 can fill out forms that can't
be filled by any other version, or at least I don't know how to do it. I
have short cut keys so it isn't
|
By
Marsha <marcatony@...>
·
#4983
·
|
|
Removing Older Versions of JFW
I removed 9, 10, and 11, and had no trouble. JAWS 13 started up just fine.
I doublechecked that I didn't remove either common files or personal
settings.
I removed 9, 10, and 11, and had no trouble. JAWS 13 started up just fine.
I doublechecked that I didn't remove either common files or personal
settings.
|
By
Rick Roderick <rickrod@...>
·
#4982
·
|
|
Re: [Bulk] [Bulk] Removing Older Versions of JFW
Joni, Marsha, and Adrian,
Good that you all are not experiencing any problems switching back/forth. As
Adrian has observed more than once on this list, the danger appears to be
when removing one of
Joni, Marsha, and Adrian,
Good that you all are not experiencing any problems switching back/forth. As
Adrian has observed more than once on this list, the danger appears to be
when removing one of
|
By
Dave...
·
#4981
·
|
|
Re: [Bulk] Removing Older Versions of JFW
Dave, I am not Marsha, but I have swapped between JAWS 5 and 12 with no
problem.
I asked a tech support person at FS about deleting JAWS 4 and 5 just to pick
up a little hard disk space on my
Dave, I am not Marsha, but I have swapped between JAWS 5 and 12 with no
problem.
I asked a tech support person at FS about deleting JAWS 4 and 5 just to pick
up a little hard disk space on my
|
By
Joni Colver <earlybird@...>
·
#4980
·
|
|
Re: [Bulk] Removing Older Versions of JFW
I frequently switch between JAWS 9, which came out before the video chain
change, and JAWS 11/12 without consequences.
I frequently switch between JAWS 9, which came out before the video chain
change, and JAWS 11/12 without consequences.
|
By
Adrian Spratt
·
#4979
·
|
|
Re: [Bulk] Putting Jaws to sleep or no speech
Press insert + space bar then press s. That will turn speech off. It's a
toggle, so just do the same thing to turn speech back on. Hope that helps.
Press insert + space bar then press s. That will turn speech off. It's a
toggle, so just do the same thing to turn speech back on. Hope that helps.
|
By
Londa Peterson <lpeterson@...>
·
#4978
·
|
|
Re: [Bulk] Removing Older Versions of JFW
Marsha,
Not surprised that JAWS 7 still has capabilities lost in later versions. But
I'd go nuts if I had to switch back that far. Also the video chain strategy
changed since then and I wonder if
Marsha,
Not surprised that JAWS 7 still has capabilities lost in later versions. But
I'd go nuts if I had to switch back that far. Also the video chain strategy
changed since then and I wonder if
|
By
Dave...
·
#4977
·
|
|
Re: [Bulk] bulk
Rick,
Which David? You didn't keep the message thread intact. In any case, it's
your or someone's ISP that labels the subject automatically when the content
is suspicious. You can check your ISP if
Rick,
Which David? You didn't keep the message thread intact. In any case, it's
your or someone's ISP that labels the subject automatically when the content
is suspicious. You can check your ISP if
|
By
Dave...
·
#4976
·
|
|
Re: Removing Older Versions of JFW
HI
I still have Jaws 7 with my XP. Believe it or not, there are still things
I can do with Jaws 7 that I am not able to do with other versions. This is
one reason I don't want to upgrade to
HI
I still have Jaws 7 with my XP. Believe it or not, there are still things
I can do with Jaws 7 that I am not able to do with other versions. This is
one reason I don't want to upgrade to
|
By
Marsha <marcatony@...>
·
#4975
·
|
|
Re: [Bulk] Putting Jaws to sleep or no speech
Howard,
Those tones are exactly what you want to hear. After that, press s. Then,
when in JAWS key identifier mode, you'll be told:
"toggles whether synthesizer is muted."
Howard,
Those tones are exactly what you want to hear. After that, press s. Then,
when in JAWS key identifier mode, you'll be told:
"toggles whether synthesizer is muted."
|
By
Adrian Spratt
·
#4974
·
|
|
Re: Removing Older Versions of JFW
Tina,
First, instead of removing via add/remove programs in the control panel, go
to the version of JAWS you want in the programs menu. Click on that version
and arrow down to "uninstall." The wizard
Tina,
First, instead of removing via add/remove programs in the control panel, go
to the version of JAWS you want in the programs menu. Click on that version
and arrow down to "uninstall." The wizard
|
By
Adrian Spratt
·
#4973
·
|
|
bulk
David,
Why do all your messages have [bulk] in the subject line?
David,
Why do all your messages have [bulk] in the subject line?
|
By
Rick Roderick <rickrod@...>
·
#4972
·
|
|
Re: Word 2007
I notice this in Outlook 2010 also, control backspace just says blank. Very
annoying, if I did not have a braille display I would be even more annoyed
with this.
Rose Combs
rosecombs@Q.com
I notice this in Outlook 2010 also, control backspace just says blank. Very
annoying, if I did not have a braille display I would be even more annoyed
with this.
Rose Combs
rosecombs@Q.com
|
By
Rose Combs <rosecombs@...>
·
#4971
·
|
|
Re: [Bulk] [Bulk] JAWS 13, and MS WORD'S "word count"
Hello there;
Summary: Count the number of words, paragraphs, lines, or pages that make up
your Microsoft Word 2003 document.
Curious to know how many words make up your Microsoft Word 2003
Hello there;
Summary: Count the number of words, paragraphs, lines, or pages that make up
your Microsoft Word 2003 document.
Curious to know how many words make up your Microsoft Word 2003
|
By
David <davidwhitehead1957@...>
·
#4970
·
|
|
Re: Removing Older Versions of JFW
go to the old one and uninstall. Make sure you do not delete shared components.
go to the old one and uninstall. Make sure you do not delete shared components.
|
By
Holger Fiallo <holgerfiallo@...>
·
#4969
·
|
|
Re: [Bulk] [Bulk] JAWS 13, and MS WORD'S "word count"
That's the issue, the version of word. At my office we are still using 2003.
K
--
Kimberly
That's the issue, the version of word. At my office we are still using 2003.
K
--
Kimberly
|
By
Kimber Gardner
·
#4968
·
|
|
Removing Older Versions of JFW
Is it possible to remove older versions of JFW without adversely
effecting the current version in use? If so, how? When I try to use
the add/remove feature in the control panel, the installation
Is it possible to remove older versions of JFW without adversely
effecting the current version in use? If so, how? When I try to use
the add/remove feature in the control panel, the installation
|
By
SingingHearts <singinghearts@...>
·
#4967
·
|
|
Re: [Bulk] Putting Jaws to sleep or no speech
Adrian, I put on keyboard help, then pressed insert plus spacebar. I got a pair of ascending click tones just like when help was off. Any following keypress did nothing obvious.
In the past, maybe
Adrian, I put on keyboard help, then pressed insert plus spacebar. I got a pair of ascending click tones just like when help was off. Any following keypress did nothing obvious.
In the past, maybe
|
By
Howard Traxler <howard@...>
·
#4966
·
|
|
Re: What always bothers me when there's an update
İt happens not only on texts, but on the display of some pages as well, İ mean they get reformatted in the way more diffrent than the previous versions.
İt happens not only on texts, but on the display of some pages as well, İ mean they get reformatted in the way more diffrent than the previous versions.
|
By
soner
·
#4965
·
|
|
Re: [Bulk] Putting Jaws to sleep
It works in JAWS 11. Press insert-1 (the 1 above the letters) to go into key
identifier mode to confirm. Use the same mode to answer your earlier post.
It works in JAWS 11. Press insert-1 (the 1 above the letters) to go into key
identifier mode to confirm. Use the same mode to answer your earlier post.
|
By
Adrian Spratt
·
#4964
·
|