|
Moderated
Still Have Problems Activating Windows Startup Sound
Tom Behler
Dave and all:
I followed the instructions below for activating the windows start-up sound, and play windows startup sound is checked. However, when I shut down and then re-boot my computer, the start-up sound does not play. I am referring here to the older computer that I recently updated to Windows 10 from Windows 7. I believe that the windows start-up sound played immediately after I did the update, but no longer plays after I downloaded and installed new Dell drivers for my system. Is there anything else I should check? Tom Behler How to turn on the "play Windows startup sound" function in Windows 10 1. When you are at the desktop, tap the WINDOWS Key, and type "change system sounds" (without the quotes, in the search edit field. Generally, as soon as you type the two letters ch, Windows usually delimits to this result. If it does, press ENTER, to open the utility. 2. When the utility opens, JAWS will speak some Windows information about system sound themes. If you do not wish to listen to the information, Tap the CTRL key, to stop JAWS speaking the infomation. 3, Tap the TAB key, until JAWS says, "play Windows startup sound". JAWS will tell you it is unchecked. This is the default setting. 4. Tap the SPACE BAR, to check the check box. 5. Tap the TAB key until you get to the Apply button, press the SPACE BAR, to apply the change 6. Tap the TAB key, until you get to the OK button, Press the SPACE BAR or, the ENTER key, to activate the OK button, to close the utility and return the system to the Desktop. 7. When you turn on the computer, restart Windows or, you wake the computer using either the Sleep mode or, Hibernation Mode, the play Windows startup sound will be played. 8. After you hear the Windows Startup sound, if you are someone who needs to enter a Windows password or, a Microsoft account password to log in to Windows, and you have not installed another screen reader or, you have, but it has not been set to start at the Log on screen, this is where you need to press CTRL+WINDOWS KEY+ENTER, to start Narrator. When Narrator starts speaking, Narrator should tell you , that you are at the point where you need to enter the Windows password or, the Microsoft account password to log into Windows. 9. If you are someone who has disabled the default log on screen, when you hear the play Windows startup sound, Windows is at the Desktop. If you have not installed another screen reader or, you have, but it has not been set to start after Windows Log on, this is where you need to press CTRL+WINDOWS KEY+ENTER, to start Narrator and get access to Windows. |
|
|
|
Moderated
Re: Copy to clipboard does not work as it worked before with Jaws
Mario
instead of using Windows+v, try JAWS+spacebar, and the letter c which "Opens the Clipboard Text Viewer and displays all text copied and appended to the Clipboard. You can then select and copy text from the viewer and paste it in other applications."
toggle quoted message
Show quoted text
-------- Original Message --------
From: Moty Azrad [mailto:motiaz@...] Subject: Copy to clipboard does not work as it worked before with Jaws Date: Monday, November 1, 2021, 2:17 PM To: JFW list <jfw@groups.io> Hi all, I usually need to copy section or some items and put them in other places. This happens especially in websites. I can copy in some websites but if I need to copy some items, not all of them in table for example, it does not work. Also, Jaws appended – winkey+insert+c, does not work as it worked some months or a year ago. I use now, Jaws2022, but I had the same trouble with Jaws 2021. When I use winkey+v it does not work or show me all the items that I coppied. Any CLARIFICATIONS WILL BE MUCH APPRECIATED. Thank much Moti Moti Azrad Musician and Piano-Tuner motiaz@...<mailto:motiaz@...>__ azrad_moty@...<mailto:azrad_moty@...>__ Israel |
|
|
|
Moderated
Copy to clipboard does not work as it worked before with Jaws
Moty Azrad
Hi all,
I usually need to copy section or some items and put them in other places. This happens especially in websites. I can copy in some websites but if I need to copy some items, not all of them in table for example, it does not work. Also, Jaws appended – winkey+insert+c, does not work as it worked some months or a year ago. I use now, Jaws2022, but I had the same trouble with Jaws 2021. When I use winkey+v it does not work or show me all the items that I coppied. Any CLARIFICATIONS WILL BE MUCH APPRECIATED.
Thank much
Moti
Moti Azrad Musician and Piano-Tuner
Israel
|
|
|
|
Moderated
Re: Block windows 11
Sieghard Weitzel <sieghard@...>
Until it doesn't, it may seem to work fine or maybe it even does now, but let's not give people a false sense that they shouldn't upgrade to Jaws 2022 when they want to use Windows 11 because I understand there might be certain things in Windows 11 where Jaws 2022 is required or maybe will be soon after the next Windows 11 update.
toggle quoted message
Show quoted text
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kenny Peyattt jr. Sent: October 31, 2021 7:32 PM To: main@jfw.groups.io Subject: Re: Block windows 11 You don't need jaws 2022 to use windows 11. Jaws 2021 will work just fine. Kenny Peyatt jr. -----Original Message----- From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Rinehart Sent: Sunday, October 31, 2021 6:48 PM To: main@jfw.groups.io Subject: Block windows 11 Hi My understanding is I would need JAWS 2022 to work with Windows 11. So how would I block my computer from automatically launching windows 11 until I can gat JAWS 2022 and allow microsoft time to work out some of the kinks that will likely happen with windows 11? Thanks Jim James Rinehart, MA, ATP, CWDP Assistive Technology Specialist 4740 Kingsway Drive Indianapolis, IN 46205 P 317.466.1000 x2527 • F 317.466.2000 jrinehart@... eastersealscrossroads.org [https://www.eastersealscrossroads.org/wp-content/uploads/2016/11/Logo_sig.gif]<https://www.eastersealscrossroads.org/> [http://www.eastersealscrossroads.org/wp-content/uploads/2016/10/f.png]<http://www.facebook.com/EasterSealsCrossroads> [http://www.eastersealscrossroads.org/wp-content/uploads/2016/10/t.png] <http://www.twitter.com/escrossroads> [http://www.eastersealscrossroads.org/wp-content/uploads/2016/10/l.png] <http://www.linkedin.com/company/easter-seals-crossroads> [http://www.eastersealscrossroads.org/wp-content/uploads/2016/10/i.png] <http://www.instagram.com/eastersealscrossroads> Please Note The information in this E-mail message may contain legally privileged and confidential information intended only for the use of the individual(s) named above. If you, the reader of this message, are not the intended recipient, you are hereby notified that you should not further disseminate, distribute, or forward this E-mail message. If you have received this E-mail in error, please notify the sender immediately and delete the original. -- Was wondering if anyone has knowledge if Spark Instant Messenger is compatible with JAWS 2018? Thanks Jim Rinehart |
|
|
|
Moderated
Re: Block windows 11
Sieghard Weitzel <sieghard@...>
You don't have to block it, just don't install it, it will not install automatically.
toggle quoted message
Show quoted text
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Rinehart Sent: October 31, 2021 3:48 PM To: main@jfw.groups.io Subject: Block windows 11 Hi My understanding is I would need JAWS 2022 to work with Windows 11. So how would I block my computer from automatically launching windows 11 until I can gat JAWS 2022 and allow microsoft time to work out some of the kinks that will likely happen with windows 11? Thanks Jim James Rinehart, MA, ATP, CWDP Assistive Technology Specialist 4740 Kingsway Drive Indianapolis, IN 46205 P 317.466.1000 x2527 • F 317.466.2000 jrinehart@... eastersealscrossroads.org [https://www.eastersealscrossroads.org/wp-content/uploads/2016/11/Logo_sig.gif]<https://www.eastersealscrossroads.org/> [http://www.eastersealscrossroads.org/wp-content/uploads/2016/10/f.png]<http://www.facebook.com/EasterSealsCrossroads> [http://www.eastersealscrossroads.org/wp-content/uploads/2016/10/t.png] <http://www.twitter.com/escrossroads> [http://www.eastersealscrossroads.org/wp-content/uploads/2016/10/l.png] <http://www.linkedin.com/company/easter-seals-crossroads> [http://www.eastersealscrossroads.org/wp-content/uploads/2016/10/i.png] <http://www.instagram.com/eastersealscrossroads> Please Note The information in this E-mail message may contain legally privileged and confidential information intended only for the use of the individual(s) named above. If you, the reader of this message, are not the intended recipient, you are hereby notified that you should not further disseminate, distribute, or forward this E-mail message. If you have received this E-mail in error, please notify the sender immediately and delete the original. -- Was wondering if anyone has knowledge if Spark Instant Messenger is compatible with JAWS 2018? Thanks Jim Rinehart |
|
|
|
Moderated
Re: How can I put GMail on my desktop?
Sieghard,
My guess is that this setting means to use a new window when opening rather than a new tab in any existing Chrome window. I have not played with that, though, but it would be consistent with that same parlance used in Chrome and other browsers with regard to new window versus new tab when links are activated. -- Brian - Windows 10, 64-Bit, Version 21H1, Build 19043 It is the function of creative men to perceive the relations between thoughts, or things, or forms of expression that may seem utterly different, and to be able to combine them into some new forms--the power to connect the seemingly unconnected. ~ William Plomer |
|
|
|
Moderated
Re: How can I put GMail on my desktop?
Sieghard Weitzel <sieghard@...>
I don't think in Edge or Google Chrome they call it a shortcut any more, but you can install a website as an App: in Edge you would log into Gmail and then press Alt + F for the File menu and go to "Apps" (pressing A should take you there), expand that menu and arrow down to "Install this site as an app". In Chrome press just the Alt key, then arrow down to "More Tools" and you find the option to "Create Shortcut". You can then name the shortcut and there is a checkbox which says "Open as a Window", I don't know what this means, maybe Brian does and can explain it.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
Brian Vogel
Sent: November 1, 2021 8:50 AM To: main@jfw.groups.io Subject: Re: How can I put GMail on my desktop?
Shirley, Brian - Windows 10, 64-Bit, Version 21H1, Build 19043 It is the function of creative men to perceive the relations between thoughts, or things, or forms of expression that may seem utterly different, and to be able to combine them into some new forms--the power to connect the seemingly unconnected. ~ William Plomer |
|
|
|
Moderated
Re: JAWS 2022
Sieghard Weitzel <sieghard@...>
You can just upgrade, if you had the Beta before and upgrade you then have the full version and the Beta is gone, there is no need to first uninstall the Beta. There are a few ways to hear the Jaws version:
1. Press Jaws Key + J followed by Control + Jaws Key + V, this bring up the Jaws information in the virtual viewer 2. Jaws Key + J followed by "A" for "About", this bring up the information as well, but it's not a virtual window so you have to switch to the Jaws cursor to review it in detail 3. Jaws Key + J followed by Up Arrow twice, this takes you to "About" so essentially the same as above 4. If you don't run Jaws from the system tray you can also press Alt + Tab until you get to the Jaws window and then press Control + Jaws Key + V
My preferred method is #1 because it's just two keystrokes and I can immediately use the virtual cursor to navigate the information and, if I want to, copy the Jaws version info.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
clarence carter via groups.io
Sent: October 31, 2021 7:03 PM To: main@jfw.groups.io Subject: Re: JAWS 2022
Thanks!
Did I miss something, or can I just upgrade to the full version now?
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
Richard Turner
I uninstalled the beta before I installed the full version of Jaws 2022.
The jaws command insert+control+v will tell you the version of the software you are running. Doing it twice put it in a virtual window that you can select and copy from if you ever need that. That is a great command if you ever need to know the exact version of Word, or Outlook or whatever that you are using with Jaws. But in the Jaws window after pressing insert+j you can either press insert+control+v or just arrow up to About and hit enter.
Once you are on the one that doesn’t say beta, you can check it to start at logon and after logon.
HTH,
Richard “Reality is the leading cause of stress for those who are in touch with it.” – Jane Wagner
My Web site: https://www.turner42.com
From: main@jfw.groups.io <main@jfw.groups.io>
On Behalf Of clarence carter via groups.io
JAWS 2022 is giving me trouble.
First, how can I determine which version is loaded. There is no designation of which one is working. It was there at first, but now it has disappeared. Second, When I attempted to get rid of the beta There was no way to shut it down. I also noticed that the options are the same for both versions. When I unchecked the run jaws at start up in 2021, it was unchecked in 2022.
How can I fix the bata, or if notpossible, get rid of it.
Any help would be appreciated. |
|
|
|
Moderated
Re: What is the Jaws keystroke for checking the battery status
Sieghard Weitzel <sieghard@...>
Yes, but often it's just a matter of not knowing what the keyboard shortcut is and getting used to something and it becomes what I call muscle memory. I guess Supertramp would say "Let's take the long way home"/.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
Richard Turner
Sent: November 1, 2021 9:58 AM To: main@jfw.groups.io Subject: Re: What is the Jaws keystroke for checking the battery status
Sieghard, Some people like the scenic route and others like the highway.
Also, the insert+capslock+b only works if CapsLock is set as a jaws modifier key. I use the straight on highway of insert+shift+b.
I only like the scenic route when I’m traveling and have time.
😊
Richard “Reality is the leading cause of stress for those who are in touch with it.” – Jane Wagner
My Web site: https://www.turner42.com
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
Sieghard Weitzel
What do you do to get the time? Do you press Jaws Key + F12 or do you press Jaws Key + F11 to bring up the system try and then arrow down to where the time is displayed? Same difference, the system try has the information, but the keyboard shortcuts is there for quick access to said information.
From: main@jfw.groups.io <main@jfw.groups.io>
On Behalf Of David Diamond
I just go into the notification bar. Or where the time, network status etc. shows up. Generally there it tells you the battery strength.
From: main@jfw.groups.io <main@jfw.groups.io>
On Behalf Of Sieghard Weitzel
Jaws Key + Caps Lock + B requires quite the finger acrobatics and for me is actually an impossible key combination to press.
From: main@jfw.groups.io <main@jfw.groups.io>
On Behalf Of Tom Behler
Insert plus capslock plus B works here as well.
Never knew that before.
Now, I have two options for checking battery status.
Tom Behler
From: main@jfw.groups.io <main@jfw.groups.io>
On Behalf Of Annabelle Susan Morison
Hey Albert! I think the keystroke you're looking for is JAWS key+Shift+B.
|
|
|
|
Moderated
Re: What is the Jaws keystroke for checking the battery status
Richard Turner <richardturner42@...>
Sieghard, Some people like the scenic route and others like the highway.
Also, the insert+capslock+b only works if CapsLock is set as a jaws modifier key. I use the straight on highway of insert+shift+b.
I only like the scenic route when I’m traveling and have time.
😊
Richard “Reality is the leading cause of stress for those who are in touch with it.” – Jane Wagner
My Web site: https://www.turner42.com
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
Sieghard Weitzel
Sent: Monday, November 1, 2021 9:55 AM To: main@jfw.groups.io Subject: Re: What is the Jaws keystroke for checking the battery status
What do you do to get the time? Do you press Jaws Key + F12 or do you press Jaws Key + F11 to bring up the system try and then arrow down to where the time is displayed? Same difference, the system try has the information, but the keyboard shortcuts is there for quick access to said information.
From: main@jfw.groups.io <main@jfw.groups.io>
On Behalf Of David Diamond
I just go into the notification bar. Or where the time, network status etc. shows up. Generally there it tells you the battery strength.
From: main@jfw.groups.io <main@jfw.groups.io>
On Behalf Of Sieghard Weitzel
Jaws Key + Caps Lock + B requires quite the finger acrobatics and for me is actually an impossible key combination to press.
From: main@jfw.groups.io <main@jfw.groups.io>
On Behalf Of Tom Behler
Insert plus capslock plus B works here as well.
Never knew that before.
Now, I have two options for checking battery status.
Tom Behler
From: main@jfw.groups.io <main@jfw.groups.io>
On Behalf Of Annabelle Susan Morison
Hey Albert! I think the keystroke you're looking for is JAWS key+Shift+B.
|
|
|
|
Moderated
Re: TW Blue Stopped Working
Madison Martin
Yes, I’m running the latest version of Windows 10, but I’ll be upgrading to Windows 11 at some point, likely soon. I just tried the link, but I still got the same message, any idea what’s wrong/what I might be doing wrong? I use Firefox as my browser
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Randy Meyer
Sent: November 1, 2021 11:15 AM To: main@jfw.groups.io Subject: Re: TW Blue Stopped Working
I am assuming you are running windows 10? If yes, I would start by deleting all TWBlue setup files from your download folders. Then, you should click the link that Inamuddin Khan sent. This should download TWBlue_setup.exe
Clicking on the newly downloaded TWBlue_setup.exe should work.
Randy Meyer
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Okay, I just tried to install that file and I got a message saying that “this app can’t run on your pc,” what do I do?
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Randy Meyer
Thank you Inamuddin Khan, Deleting the TWBlue folder in the %appdata% was my missing step. The updated TWBlue is now working for me.
Madison, I believe the first file you mentioned is the correct one. I had one file, TWBlue_setup.exe and everything worked for me. I did have to authorize Twitter to work with TWBlue again, as expected.
Randy Meyer
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Okay, which file do I install, there’s one that says setup.exe and then there’s one that says setup.exe.part? I really don’t want to install the wrong one, I have both of them in my downloads folder.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of inamuddin khan
Try this one: https://twblue.es/pubs/twblue_setup.exe
Sent from Mail for Windows
From: stewartross via groups.io
i am on jaws 2019 windows 7, and mines stopped to. stew
|
|
|
|
Moderated
Re: What is the Jaws keystroke for checking the battery status
Sieghard Weitzel <sieghard@...>
What do you do to get the time? Do you press Jaws Key + F12 or do you press Jaws Key + F11 to bring up the system try and then arrow down to where the time is displayed? Same difference, the system try has the information, but the keyboard shortcuts is there for quick access to said information.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
David Diamond
Sent: October 31, 2021 9:38 PM To: main@jfw.groups.io Subject: Re: What is the Jaws keystroke for checking the battery status
I just go into the notification bar. Or where the time, network status etc. shows up. Generally there it tells you the battery strength.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
Sieghard Weitzel
Jaws Key + Caps Lock + B requires quite the finger acrobatics and for me is actually an impossible key combination to press.
From: main@jfw.groups.io <main@jfw.groups.io>
On Behalf Of Tom Behler
Insert plus capslock plus B works here as well.
Never knew that before.
Now, I have two options for checking battery status.
Tom Behler
From: main@jfw.groups.io <main@jfw.groups.io>
On Behalf Of Annabelle Susan Morison
Hey Albert! I think the keystroke you're looking for is JAWS key+Shift+B.
|
|
|
|
Moderated
Re: TW Blue Stopped Working
Randy Meyer
I am assuming you are running windows 10? If yes, I would start by deleting all TWBlue setup files from your download folders. Then, you should click the link that Inamuddin Khan sent. This should download TWBlue_setup.exe
Clicking on the newly downloaded TWBlue_setup.exe should work.
Randy Meyer
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Monday, November 1, 2021 10:51 AM To: main@jfw.groups.io Subject: Re: TW Blue Stopped Working
Okay, I just tried to install that file and I got a message saying that “this app can’t run on your pc,” what do I do?
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Randy Meyer
Thank you Inamuddin Khan, Deleting the TWBlue folder in the %appdata% was my missing step. The updated TWBlue is now working for me.
Madison, I believe the first file you mentioned is the correct one. I had one file, TWBlue_setup.exe and everything worked for me. I did have to authorize Twitter to work with TWBlue again, as expected.
Randy Meyer
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Okay, which file do I install, there’s one that says setup.exe and then there’s one that says setup.exe.part? I really don’t want to install the wrong one, I have both of them in my downloads folder.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of inamuddin khan
Try this one: https://twblue.es/pubs/twblue_setup.exe
Sent from Mail for Windows
From: stewartross via groups.io
i am on jaws 2019 windows 7, and mines stopped to. stew
|
|
|
|
Moderated
Re: TW Blue Stopped Working
Mario
what is a snapshot version? never heard of such a thing.
toggle quoted message
Show quoted text
-------- Original Message --------
From: John Covici [mailto:covici@...] Subject: TW Blue Stopped Working Date: Monday, November 1, 2021, 8:28 AM To: main@jfw.groups.io Be sure to download the snapshot version of twblue from their downloads page and try again. Be sure to download the latest one. I am not sure what your original error was, but at least you need to do this. On Mon, 01 Nov 2021 07:47:31 -0400, Monica S wrote: [1 <text/plain; utf-8 (quoted-printable)>] Hi, I’m forgetting the commands at the moment for this. Could you tell me what I need to type in order to delete the twBlue folder from %app data %? Also, do I firsrst uninstall TW Blue? Thank you for any assistance, Monica From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of inamuddin khan Sent: Sunday, October 31, 2021 9:37 PM To: main@jfw.groups.io Subject: Re: TW Blue Stopped Working Dear friends the matter of fact is that TWBlue was updated to 2021.10.30 Please download it: https://twblue.es/pubs/twblue_setup.exe Before installing this version don’t forget to uninstall the last one and delete the folder of TWBlue from %Appdada% With regards from Inamuddin with the Skype ID: Charlsdarwin1 Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows From: Petrina Delves via groups.io <mailto:delves465@...> Sent: Monday, November 1, 2021 2:37 AM To: main@jfw.groups.io <mailto:main@jfw.groups.io> Subject: Re: TW Blue Stopped Working Same here, running Windows 10 and JAWS 2019. Petrina From: <mailto:randymeyer@...> Randy Meyer Sent: Sunday, October 31, 2021 5:31 PM To: <mailto:main@jfw.groups.io> main@jfw.groups.io Subject: TW Blue Stopped Working TW Blue suddenly stopped working on my computer this weekend. I am running JAWS 2022 and latest version of windows 10. Is anyone else experiencing problems with TW Blue? Does anyone have suggestions for an app for getting and responding to tweets on a windows 10 computer? Randy Meyer [2 <text/html; utf-8 (quoted-printable)>] |
|
|
|
Moderated
Re: How can I put GMail on my desktop?
By the way, also remember that you can set up any of the modern browsers to open with a defined page, or set of pages, or have it always open to the set of pages you had open when you last closed it.
I use Gmail and, because of how and when I opened it, it always remains the first tab in my browser and the browser is using the option to open to the last set of pages I had been browsing. -- Brian - Windows 10, 64-Bit, Version 21H1, Build 19043 It is the function of creative men to perceive the relations between thoughts, or things, or forms of expression that may seem utterly different, and to be able to combine them into some new forms--the power to connect the seemingly unconnected. ~ William Plomer |
|
|
|
Moderated
Re: How can I put GMail on my desktop?
Shirley,
Just curious what browser you're using? Glenn's recommendation will definitely work, and it's browser agnostic, but some browsers make it very easy to send a shortcut to the desktop, while others don't. As an aside, it's no surprise that Windows Live Mail is going wonky for you. I recommended it as a basic email client even after it was out of support, which is a very rare exception for me, but stopped about a year ago because it is becoming problematic, particularly with GMail and other email services that use more secure authorization than Windows Live Mail was ever designed to support. -- Brian - Windows 10, 64-Bit, Version 21H1, Build 19043 It is the function of creative men to perceive the relations between thoughts, or things, or forms of expression that may seem utterly different, and to be able to combine them into some new forms--the power to connect the seemingly unconnected. ~ William Plomer |
|
|
|
Moderated
Re: TW Blue Stopped Working
Madison Martin
Okay, I just tried to install that file and I got a message saying that “this app can’t run on your pc,” what do I do?
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Randy Meyer
Sent: November 1, 2021 10:47 AM To: main@jfw.groups.io Subject: Re: TW Blue Stopped Working
Thank you Inamuddin Khan, Deleting the TWBlue folder in the %appdata% was my missing step. The updated TWBlue is now working for me.
Madison, I believe the first file you mentioned is the correct one. I had one file, TWBlue_setup.exe and everything worked for me. I did have to authorize Twitter to work with TWBlue again, as expected.
Randy Meyer
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Okay, which file do I install, there’s one that says setup.exe and then there’s one that says setup.exe.part? I really don’t want to install the wrong one, I have both of them in my downloads folder.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of inamuddin khan
Try this one: https://twblue.es/pubs/twblue_setup.exe
Sent from Mail for Windows
From: stewartross via groups.io
i am on jaws 2019 windows 7, and mines stopped to. stew
|
|
|
|
Moderated
Re: TW Blue Stopped Working
Randy Meyer
Thank you Inamuddin Khan, Deleting the TWBlue folder in the %appdata% was my missing step. The updated TWBlue is now working for me.
Madison, I believe the first file you mentioned is the correct one. I had one file, TWBlue_setup.exe and everything worked for me. I did have to authorize Twitter to work with TWBlue again, as expected.
Randy Meyer
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Monday, November 1, 2021 10:27 AM To: main@jfw.groups.io Subject: Re: TW Blue Stopped Working
Okay, which file do I install, there’s one that says setup.exe and then there’s one that says setup.exe.part? I really don’t want to install the wrong one, I have both of them in my downloads folder.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of inamuddin khan
Try this one: https://twblue.es/pubs/twblue_setup.exe
Sent from Mail for Windows
From: stewartross via groups.io
i am on jaws 2019 windows 7, and mines stopped to. stew
|
|
|
|
Moderated
Re: How can I put GMail on my desktop?
Shirley Tracy
Thanks. It sounds easy enough for me. :) On Mon, Nov 1, 2021 at 11:39 AM Glenn / Lenny <glenn@...> wrote: Hi Shirley, -- Shirley Tracy Shirley Tracy |
|
|
|
Moderated
Re: How can I put GMail on my desktop?
K0LNY
Hi Shirley,
toggle quoted message
Show quoted text
There may be other methods people use, but here's how I make a link to a web page. While on the page, do alt + D This puts you in the address field. Then do control C to copy it Then you can do F6 to get out of the address field. Then focus on the desktop. If something is highlighted, that something is selected, which is likely the case, do control space to unselect it. Then use the applications key, or shift F10 if you don't have an applications key, and arrow to new, and right arrow into that, and down arrow to shortcut and press enter. Then you will be in the location field, so you can paste what you copied before. Then tab to next and give it a name, and then tab to okay or close or whatever. HTH. Glenn ----- Original Message -----
From: "Shirley Tracy" <shirleytracy16@...> To: <main@jfw.groups.io> Sent: Monday, November 01, 2021 10:32 AM Subject: How can I put GMail on my desktop? Hi Listers, |
|
|