Date   

Re: getting stuck in the tool bar

Curtis Delzer
 

:) thanks! though.

At 11:59 PM 11/1/2011, you wrote:
Curtis,

Don't thank me, thank Adrian. He's the one who pointed it out, and it's
great. Freedom Scientific responded to my suggestion to make a single-letter
navigation key to emulate Ctrl-f6 and they suggested I write my own script,
but did pass it along to the suggestions folks. So toss that idea into the
round file.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Curtis Delzer" <curtis@calweb.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Tuesday, November 01, 2011 21:32
Subject: Re: getting stuck in the tool bar


thanks for this! control-f6, wish I'd have known b4.


At 11:35 AM 11/1/2011, you wrote:
Ed,

No, Ctrl+F6 has worked consistently since I learned about it. It's a
life-saver. FS really should put together a "tips and trick" seminar or
posting to their site. Perhaps add it to their Surf's Up presentation.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Marquette, Ed" <Ed.Marquette@KutakRock.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Tuesday, November 01, 2011 08:49
Subject: RE: getting stuck in the tool bar


Just tried f-6. It did nothing. Control plus f-6, however, worked just
fine. Of course, perhaps that was more accident than anything else. This
is definitely a flakey problem.


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Curtis Delzer
Sent: Tuesday, November 01, 2011 10:42 AM
To: The Jaws for Windows support list.
Subject: Re: getting stuck in the tool bar

f6, maybe, that sometimes gets me out.



At 10:17 AM 10/31/2011, you wrote:
IF tabbing does not get you out and just cycles through, it's usually
because the page has not finished loading. Try F5 to refresh.

I've also cursed at the whole IE interface every time I get "stuck" up
there
in that area. I've turned off everything I can think of and still there
are
elements that grab my cursor if I'm careless enough to tab beyond the
bottom
of a page.

Don't know any answers, as it's more to do with IE7 and IE8 layout than
JAWS.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Brian" <bvarner05@comcast.net>
To: <jfw@lists.the-jdh.com>
Sent: Monday, October 31, 2011 07:30
Subject: getting stuck in the tool bar


I have not figured out why I seem to get "stuck" in the tool bar. I'm
running 13 now but seemed to have the same problem with 12. Sometimes I
can
just hit tab a few times and get down into the page, other times hitting
tab
just cycles through the toolbar. Somtimes switching to the virtual
cursor
helps, other times nothing helps.



_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachmen
ts/20111101/f171ba34/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
###################################################################
##########################################
ANY FEDERAL TAX ADVICE CONTAINED IN THIS MESSAGE SHOULD NOT BE USED OR
REFERRED TO IN THE PROMOTING, MARKETING OR
RECOMMENDING OF ANY ENTITY, INVESTMENT PLAN OR ARRANGEMENT, AND SUCH ADVICE
IS NOT INTENDED OR WRITTEN TO BE USED,
AND CANNOT BE USED, BY A TAXPAYER FOR THE PURPOSE OF AVOIDING PENALTIES
UNDER THE INTERNAL REVENUE CODE.
###################################################################
##########################################
This E-mail message is confidential, is intended only for the named
recipient(s) above and may contain information
that is privileged, attorney work product or otherwise protected by
applicable law. If you have received this
message in error, please notify the sender at 402-346-6000 and delete this
E-mail message.
Thank you.
###################################################################
##########################################

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111101/fc176e68/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111102/235271e6/attachment.html>


copying text from a web page

Brian <bvarner05@...>
 

When I want to copy text off a web page, I select the text, use ctrl-c, then
paste it into notepad. this gets rid of all html (I think) and you get
plain text you can copy into Word or elsewhere. I used to do this for
medical transcription, especially drug names, then found that the medical
transcription software (ChartNet) pasted the html coding asociated with the
drug name instead of the plain text of the drug name. ChartNet is based on
Word so that might be why the html stuff was showing up instead of plain
text.

By the way, I was having problems with Internet Explorer being very slow to
open and going to links as new pages, etc. I tried to get rid of add ons
under internet options and when I'd get to the manage add ons button, JAWS
wouldn't navigate to the list of add ons reliably. FS support said JAWS
doesn't read this area very well. Then I was told to upgrade to Internet
Explorer 8. I was running 7. I tried doing that a couple of years ago and
had issues. A computer programmer friend came over and we had to reinstall
version 7 because XP seemed to be impossibly conjoined to version 7. This
morning, I downloaded IE 8 and things seem to be running much better. I've
not gotten stuck in the tool bar (yet) but now I'll be trying ctrl-F6 thanks
to the advice from this list.

Brian
***********
Hi folks! I am having problems copying and pasting text from a web-site to
a document. Not sure why, but I've never experienced this with other jaws
versions. Other than this, jfw 13 works fairly well for me.


Re: What kind of tech support is that?

Dave...
 

Kimber,

Agree that the suggestion is nebulous, but it just underscores that they
don't have a clue, or that they can't duplicate what you're experiencing.
The latter is usually what happens to me -- their exact setup matching mine
works just fine for them.

As to their suggestion of "resetting the JAWS user settings" all I can think
of is either clear out all your user-defined scripts from the ENU folder
(which you only do after backing them all up somewhere), or using the
settings center and setting the user dialog items to their default values.


Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area

----- Original Message -----
From: "Kimber Gardner" <kimbersinbox1963@gmail.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Wednesday, November 02, 2011 04:01
Subject: What kind of tech support is that?


Hi All,

A week or so ago I posted to the list an issue I was having with Jaws
13 where in my braille display freezes at random times in random
applications. I emailed FS tech support as well and here is the answer
I received.

"Please try resetting your JAWS user settings. This often clears up
issues of this type."

Now maybe it's me, but what the heck kind of tech support is that? I
mean this is a brand new release and I'm reporting an issue that has
never happened in earlier releases and *that* is the answer I get?

Really FS needs to do better by its long-time customers.

Kimber

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: What kind of tech support is that?

Debbie April Yuille <debbieyuille@...>
 

Well did you try that? Maybe that is the answer you are looking for. If you
did what they suggested and it didn't work, then write back to them.

Debbie
Email: debbieyuille@bigpond.com
MSN: apparating.girl@hotmail.com
Skype: apparating.girl
Twitter: DebbieYuille

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Kimber Gardner
Sent: Wednesday, 2 November 2011 10:02 PM
To: The Jaws for Windows support list.
Subject: What kind of tech support is that?

Hi All,

A week or so ago I posted to the list an issue I was having with Jaws
13 where in my braille display freezes at random times in random
applications. I emailed FS tech support as well and here is the answer
I received.

"Please try resetting your JAWS user settings. This often clears up
issues of this type."

Now maybe it's me, but what the heck kind of tech support is that? I
mean this is a brand new release and I'm reporting an issue that has
never happened in earlier releases and *that* is the answer I get?

Really FS needs to do better by its long-time customers.

Kimber

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

__________ Information from ESET Smart Security, version of virus signature
database 6593 (20111101) __________

The message was checked by ESET Smart Security.

http://www.eset.com


What kind of tech support is that?

Kimber Gardner
 

Hi All,

A week or so ago I posted to the list an issue I was having with Jaws
13 where in my braille display freezes at random times in random
applications. I emailed FS tech support as well and here is the answer
I received.

"Please try resetting your JAWS user settings. This often clears up
issues of this type."

Now maybe it's me, but what the heck kind of tech support is that? I
mean this is a brand new release and I'm reporting an issue that has
never happened in earlier releases and *that* is the answer I get?

Really FS needs to do better by its long-time customers.

Kimber


Re: JAWS dictionary

Adrian Spratt
 

No one has replied to Joni's query about transferring the JDF dictionary
file from JAWS 6 to either JAWS 12 or 13. I've always had success merging my
dictionary settings from one version to the next, but I doubt it would work
going from 6 to 12/13. If I'm wrong, please post.

Otherwise, can someone post simple instructions for adding personal
dictionary settings to a much later version. I know, for example, that the
JDF file path changed when FS included its name there, and I don't recall if
that change was in effect with JAWS 6. Below I'm copying a past post from
this list (apologies for not having the lister's name) and old FS
instructions on this general subject, but I can't be sure they work in
Joni's situation.

** Dictionary, copy from one version to another
To copy those scripts over to JAWS 10, first go to the enu folder in JAWS 9,
using the following path:

c:\Documents and Settings\User Name\Application Data\Freedom
Scientific\Jaws\9.0\Settings\enu

Locate the script files you want to copy and highlight them; then, press
Control c to copy them to the clipboard. Now, go to the enu folder in JAWS
10, using the following path:

c:\Documents and Settings\User Name\Application Data\Freedom
Scientific\Jaws\10.0\Settings\enu

Paste those script files into this enu folder. That should do it.

** Instructions from FS in 2002

To move dictionary files from a previous version to the current version, It
is best to copy the *.jdf files from the settings\enu folder of the older
version to the settings\enu folder of a current version.

for example, if you are attempting to move dictionary files from the Jaws
4.01.227 folder to the Jaws 4.02.52 folder, it can be done using the steps
below.

1. go to the run dialog (windows key+r)

2. Type in:

cmd

and hit enter

3. Type in:

cd\jaws401\settings\enu

and hit enter

4. Type in:

copy *.jdf c:\jaws402\settings\enu

and hit enter

This will move the dictionary files to the latest version. If you know the
name of the exact dictionary file, you can use the name of the file instead
of the *wild card.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Joni Colver
Sent: Tuesday, November 01, 2011 3:26 PM
To: Jfw@lists.the-jdh.com
Subject: JAWS dictionary

I am currently using a work computer with JAWS 6 installed on it. I am
apparently going to be getting a new computer from my employer, and I know a
later version of JAWS will be installed, although I don't know which one. I
have a lot of dictionary entries in the JAWS 6 version and I really need
them for work. Is there any way I can copy that file from the current work
computer and put it into the new version of JAWS when I receive that
computer? I don't know if it would be possible or wise to put a JAWS 6 jdf
file into JAWS 11 or 12 or whatever version of JAWS I am going to work with.

If this is not possible, is there a way I can get a list of the dictionary
entries onto the clipboard and paste them somewhere so I know what I have
added, or will I have to arrow through the list one by one and write them
down? That could be quite a task. Thanks in advance for any help.

Joni


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: getting stuck in the tool bar

Adrian Spratt
 

Thanks for the acknowledgment, Dave. In fairness, as I said in my post, the
solution comes from Negoslav, in a message he posted some time ago.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Farfar on Laptop
Sent: Wednesday, November 02, 2011 1:00 AM
To: The Jaws for Windows support list.
Subject: Re: getting stuck in the tool bar

Curtis,

Don't thank me, thank Adrian. He's the one who pointed it out, and it's
great. Freedom Scientific responded to my suggestion to make a single-letter
navigation key to emulate Ctrl-f6 and they suggested I write my own script,
but did pass it along to the suggestions folks. So toss that idea into the
round file.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Curtis Delzer" <curtis@calweb.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Tuesday, November 01, 2011 21:32
Subject: Re: getting stuck in the tool bar


thanks for this! control-f6, wish I'd have known b4.


At 11:35 AM 11/1/2011, you wrote:
Ed,

No, Ctrl+F6 has worked consistently since I learned about it. It's a
life-saver. FS really should put together a "tips and trick" seminar or
posting to their site. Perhaps add it to their Surf's Up presentation.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Marquette, Ed" <Ed.Marquette@KutakRock.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Tuesday, November 01, 2011 08:49
Subject: RE: getting stuck in the tool bar


Just tried f-6. It did nothing. Control plus f-6, however, worked just
fine. Of course, perhaps that was more accident than anything else. This
is definitely a flakey problem.


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Curtis Delzer
Sent: Tuesday, November 01, 2011 10:42 AM
To: The Jaws for Windows support list.
Subject: Re: getting stuck in the tool bar

f6, maybe, that sometimes gets me out.



At 10:17 AM 10/31/2011, you wrote:
IF tabbing does not get you out and just cycles through, it's usually
because the page has not finished loading. Try F5 to refresh.

I've also cursed at the whole IE interface every time I get "stuck" up
there
in that area. I've turned off everything I can think of and still there
are
elements that grab my cursor if I'm careless enough to tab beyond the
bottom
of a page.

Don't know any answers, as it's more to do with IE7 and IE8 layout than
JAWS.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Brian" <bvarner05@comcast.net>
To: <jfw@lists.the-jdh.com>
Sent: Monday, October 31, 2011 07:30
Subject: getting stuck in the tool bar


I have not figured out why I seem to get "stuck" in the tool bar. I'm
running 13 now but seemed to have the same problem with 12. Sometimes I
can
just hit tab a few times and get down into the page, other times hitting
tab
just cycles through the toolbar. Somtimes switching to the virtual
cursor
helps, other times nothing helps.



_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111
101/f171ba34/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
###########################################################################
##################################
ANY FEDERAL TAX ADVICE CONTAINED IN THIS MESSAGE SHOULD NOT BE USED OR
REFERRED TO IN THE PROMOTING, MARKETING OR
RECOMMENDING OF ANY ENTITY, INVESTMENT PLAN OR ARRANGEMENT, AND SUCH ADVICE
IS NOT INTENDED OR WRITTEN TO BE USED,
AND CANNOT BE USED, BY A TAXPAYER FOR THE PURPOSE OF AVOIDING PENALTIES
UNDER THE INTERNAL REVENUE CODE.
###########################################################################
##################################
This E-mail message is confidential, is intended only for the named
recipient(s) above and may contain information
that is privileged, attorney work product or otherwise protected by
applicable law. If you have received this
message in error, please notify the sender at 402-346-6000 and delete this
E-mail message.
Thank you.
###########################################################################
##################################

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201111
01/fc176e68/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: not good

2.g.i <2.g.i.84972@...>
 

well said Tom

At 12:25 PM 11/2/2011, you wrote:
Lol, eh? Doesn't sound at all funny to me. Times are tough these days even for those of us with good jobs, so I can empathize with people who are living from paycheck to paycheck or who are out of work and within a hair's breadth of living on the streets. That's no laughing matter for sighted folks and it sure isn't funny for blind guys. I'll grant you that this isn't a chat room but you've got no call to dismiss this guy's plight in such a flippant manner. Shame on you!

Tom

Tom

----- Original Message ----- From: "George B" <gbmagoo@comcast.net>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Tuesday, November 01, 2011 10:05 AM
Subject: RE: not good


Here we go again with the jaws chat room...lol

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of hannah day
Sent: Tuesday, November 01, 2011 09:59
To: The Jaws for Windows support list.
Subject: Re: not good

Hi Brian and all

Aw no sorry to hear that i hope things improve chat soon hanah


Hannah Day
E-mail and Facebook: hannahday2009@googlemail.com
MSN hannahday1989@hotmail.co.uk
Skype: hannahday

On 01/11/2011 16:56, Brian wrote:
Hi All. This new job doesn't seem to be working out. They've scheduled a
phone call tomorrow. They sent me a copy of our original accommodations
letter which doesn't state that they'll do whatever they can to accomodate
me, even if it means paying for a JAWS script to make their platform
accessible. I told them over the phone that I wouldn't know if I could do
the work until they installed the software and gave it a try but who
cares.
If I didn't write that out in legal language it doesn't count. The new
JAWS
13 seems to have brought new issues with it in some cases so it's hard to
know who to blame, as if assigning blame would help at this point.

My stomach is in knots. I hope I'm not screwed but until that hopey
changey
stuff kicks in, reckon I'll be living in a cardboard box on the street.




_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: getting stuck in the tool bar

Dave...
 

Curtis,

Don't thank me, thank Adrian. He's the one who pointed it out, and it's
great. Freedom Scientific responded to my suggestion to make a single-letter
navigation key to emulate Ctrl-f6 and they suggested I write my own script,
but did pass it along to the suggestions folks. So toss that idea into the
round file.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area

----- Original Message -----
From: "Curtis Delzer" <curtis@calweb.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Tuesday, November 01, 2011 21:32
Subject: Re: getting stuck in the tool bar


thanks for this! control-f6, wish I'd have known b4.


At 11:35 AM 11/1/2011, you wrote:
Ed,

No, Ctrl+F6 has worked consistently since I learned about it. It's a
life-saver. FS really should put together a "tips and trick" seminar or
posting to their site. Perhaps add it to their Surf's Up presentation.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Marquette, Ed" <Ed.Marquette@KutakRock.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Tuesday, November 01, 2011 08:49
Subject: RE: getting stuck in the tool bar


Just tried f-6. It did nothing. Control plus f-6, however, worked just
fine. Of course, perhaps that was more accident than anything else. This
is definitely a flakey problem.


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Curtis Delzer
Sent: Tuesday, November 01, 2011 10:42 AM
To: The Jaws for Windows support list.
Subject: Re: getting stuck in the tool bar

f6, maybe, that sometimes gets me out.



At 10:17 AM 10/31/2011, you wrote:
IF tabbing does not get you out and just cycles through, it's usually
because the page has not finished loading. Try F5 to refresh.

I've also cursed at the whole IE interface every time I get "stuck" up
there
in that area. I've turned off everything I can think of and still there
are
elements that grab my cursor if I'm careless enough to tab beyond the
bottom
of a page.

Don't know any answers, as it's more to do with IE7 and IE8 layout than
JAWS.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Brian" <bvarner05@comcast.net>
To: <jfw@lists.the-jdh.com>
Sent: Monday, October 31, 2011 07:30
Subject: getting stuck in the tool bar


I have not figured out why I seem to get "stuck" in the tool bar. I'm
running 13 now but seemed to have the same problem with 12. Sometimes I
can
just hit tab a few times and get down into the page, other times hitting
tab
just cycles through the toolbar. Somtimes switching to the virtual
cursor
helps, other times nothing helps.



_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111101/f171ba34/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
#############################################################################################################
ANY FEDERAL TAX ADVICE CONTAINED IN THIS MESSAGE SHOULD NOT BE USED OR
REFERRED TO IN THE PROMOTING, MARKETING OR
RECOMMENDING OF ANY ENTITY, INVESTMENT PLAN OR ARRANGEMENT, AND SUCH ADVICE
IS NOT INTENDED OR WRITTEN TO BE USED,
AND CANNOT BE USED, BY A TAXPAYER FOR THE PURPOSE OF AVOIDING PENALTIES
UNDER THE INTERNAL REVENUE CODE.
#############################################################################################################
This E-mail message is confidential, is intended only for the named
recipient(s) above and may contain information
that is privileged, attorney work product or otherwise protected by
applicable law. If you have received this
message in error, please notify the sender at 402-346-6000 and delete this
E-mail message.
Thank you.
#############################################################################################################

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111101/fc176e68/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: getting stuck in the tool bar

Curtis Delzer
 

thanks for this! control-f6, wish I'd have known b4.


At 11:35 AM 11/1/2011, you wrote:
Ed,

No, Ctrl+F6 has worked consistently since I learned about it. It's a
life-saver. FS really should put together a "tips and trick" seminar or
posting to their site. Perhaps add it to their Surf's Up presentation.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Marquette, Ed" <Ed.Marquette@KutakRock.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Tuesday, November 01, 2011 08:49
Subject: RE: getting stuck in the tool bar


Just tried f-6. It did nothing. Control plus f-6, however, worked just
fine. Of course, perhaps that was more accident than anything else. This
is definitely a flakey problem.


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Curtis Delzer
Sent: Tuesday, November 01, 2011 10:42 AM
To: The Jaws for Windows support list.
Subject: Re: getting stuck in the tool bar

f6, maybe, that sometimes gets me out.



At 10:17 AM 10/31/2011, you wrote:
IF tabbing does not get you out and just cycles through, it's usually
because the page has not finished loading. Try F5 to refresh.

I've also cursed at the whole IE interface every time I get "stuck" up
there
in that area. I've turned off everything I can think of and still there are
elements that grab my cursor if I'm careless enough to tab beyond the
bottom
of a page.

Don't know any answers, as it's more to do with IE7 and IE8 layout than
JAWS.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Brian" <bvarner05@comcast.net>
To: <jfw@lists.the-jdh.com>
Sent: Monday, October 31, 2011 07:30
Subject: getting stuck in the tool bar


I have not figured out why I seem to get "stuck" in the tool bar. I'm
running 13 now but seemed to have the same problem with 12. Sometimes I
can
just hit tab a few times and get down into the page, other times hitting
tab
just cycles through the toolbar. Somtimes switching to the virtual cursor
helps, other times nothing helps.



_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111101/f171ba34/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
#############################################################################################################
ANY FEDERAL TAX ADVICE CONTAINED IN THIS MESSAGE SHOULD NOT BE USED OR
REFERRED TO IN THE PROMOTING, MARKETING OR
RECOMMENDING OF ANY ENTITY, INVESTMENT PLAN OR ARRANGEMENT, AND SUCH ADVICE
IS NOT INTENDED OR WRITTEN TO BE USED,
AND CANNOT BE USED, BY A TAXPAYER FOR THE PURPOSE OF AVOIDING PENALTIES
UNDER THE INTERNAL REVENUE CODE.
#############################################################################################################
This E-mail message is confidential, is intended only for the named
recipient(s) above and may contain information
that is privileged, attorney work product or otherwise protected by
applicable law. If you have received this
message in error, please notify the sender at 402-346-6000 and delete this
E-mail message.
Thank you.
#############################################################################################################

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111101/fc176e68/attachment.html>


Re: Microsoft office 2007 or 2010 teaching materials

Ngoc Ly <lyvanngoc@...>
 

thank you friend



Ngoc Ly
lyvanngoc@gmail.com

-----Original Message-----
From: Charles Coe
Sent: Wednesday, November 02, 2011 9:13 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Microsoft office 2007 or 2010 teaching materials

Hi,

You can find training or teaching material at the following web sites:

www.freedomscientific.com

www.blindtraining.com



-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Ngoc Ly
Sent: Tuesday, November 01, 2011 6:44 PM
To: The Jaws for Windows support list
Subject: Microsoft office 2007 or 2010 teaching materials

Dear friends,

I am looking for teaching materials with JAWS and Microsoft office 2007 or 2010. I’ll be grateful for any directions


Ngoc Ly
lyvanngoc@gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111102/2e5d848d/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: not good

Tom Lange
 

Lol, eh? Doesn't sound at all funny to me. Times are tough these days even for those of us with good jobs, so I can empathize with people who are living from paycheck to paycheck or who are out of work and within a hair's breadth of living on the streets. That's no laughing matter for sighted folks and it sure isn't funny for blind guys. I'll grant you that this isn't a chat room but you've got no call to dismiss this guy's plight in such a flippant manner. Shame on you!

Tom

Tom

----- Original Message -----
From: "George B" <gbmagoo@comcast.net>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Tuesday, November 01, 2011 10:05 AM
Subject: RE: not good


Here we go again with the jaws chat room...lol

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of hannah day
Sent: Tuesday, November 01, 2011 09:59
To: The Jaws for Windows support list.
Subject: Re: not good

Hi Brian and all

Aw no sorry to hear that i hope things improve chat soon hanah


Hannah Day
E-mail and Facebook: hannahday2009@googlemail.com
MSN hannahday1989@hotmail.co.uk
Skype: hannahday

On 01/11/2011 16:56, Brian wrote:
Hi All. This new job doesn't seem to be working out. They've scheduled a
phone call tomorrow. They sent me a copy of our original accommodations
letter which doesn't state that they'll do whatever they can to accomodate
me, even if it means paying for a JAWS script to make their platform
accessible. I told them over the phone that I wouldn't know if I could do
the work until they installed the software and gave it a try but who
cares.
If I didn't write that out in legal language it doesn't count. The new
JAWS
13 seems to have brought new issues with it in some cases so it's hard to
know who to blame, as if assigning blame would help at this point.

My stomach is in knots. I hope I'm not screwed but until that hopey
changey
stuff kicks in, reckon I'll be living in a cardboard box on the street.




_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Microsoft office 2007 or 2010 teaching materials

Charles Coe
 

Hi,

You can find training or teaching material at the following web sites:

www.freedomscientific.com

www.blindtraining.com

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Ngoc Ly
Sent: Tuesday, November 01, 2011 6:44 PM
To: The Jaws for Windows support list
Subject: Microsoft office 2007 or 2010 teaching materials

Dear friends,

I am looking for teaching materials with JAWS and Microsoft office 2007 or 2010. I’ll be grateful for any directions


Ngoc Ly
lyvanngoc@gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111102/2e5d848d/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: getting stuck in the tool bar

Tom Lange
 

Hi,
Those toolbars can be a pain in the behind and I do my best to avoid them, so when I find myself stuck in them, I jump to that address bar right quick. I usually do an alt+d to get to the address bar, then shift+tab into the body of the web page. Kinda funky but it works.
Tom

----- Original Message -----
From: "Curtis Delzer" <curtis@calweb.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Tuesday, November 01, 2011 8:41 AM
Subject: Re: getting stuck in the tool bar


f6, maybe, that sometimes gets me out.



At 10:17 AM 10/31/2011, you wrote:
IF tabbing does not get you out and just cycles through, it's usually
because the page has not finished loading. Try F5 to refresh.

I've also cursed at the whole IE interface every time I get "stuck" up there
in that area. I've turned off everything I can think of and still there are
elements that grab my cursor if I'm careless enough to tab beyond the bottom
of a page.

Don't know any answers, as it's more to do with IE7 and IE8 layout than
JAWS.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Brian" <bvarner05@comcast.net>
To: <jfw@lists.the-jdh.com>
Sent: Monday, October 31, 2011 07:30
Subject: getting stuck in the tool bar


I have not figured out why I seem to get "stuck" in the tool bar. I'm
running 13 now but seemed to have the same problem with 12. Sometimes I can
just hit tab a few times and get down into the page, other times hitting tab
just cycles through the toolbar. Somtimes switching to the virtual cursor
helps, other times nothing helps.



_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111101/f171ba34/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Microsoft office 2007 or 2010 teaching materials

Ngoc Ly <lyvanngoc@...>
 

Dear friends,

I am looking for teaching materials with JAWS and Microsoft office 2007 or 2010. I’ll be grateful for any directions


Ngoc Ly
lyvanngoc@gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111102/2e5d848d/attachment.html>


deleting in MS word 2007

Holger Fiallo <holgerfiallo@...>
 

Hi, all
Whenever I do control backspace delete , JAWS 13 does not read what I deleted. In the past with other jaws and word 2000 I was able to hear what I deleted. Do I need to do anything to jaws to get it to do so? I had not use MS word for a while.


Holger Fiallo
Kind Regard
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111101/7cb4c8ce/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Fiallo.vcf
Type: application/octet-stream
Size: 75 bytes
Desc: not available
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111101/7cb4c8ce/attachment.obj>


Re: jaws and excel

michael grove <attackfisherman1@...>
 

You can go to freedom scientifics site to download tutorials on excel

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Hina Altaf
Sent: Tuesday, November 01, 2011 12:37 PM
To: jaws-users-list@jaws-users.com; The Jaws for Windows support mailing
list (jfw@lists.the-jdh.com)
Subject: jaws and excel

Hi,
Does anyone know from where to get a free tutorial of excel with jaws?
Also in Microsoft outlook 2010, if there are two accounts how can we switch
from one to another?
Thanks.
Hina.

***

NOTE: Our Domain Name has changed from rockfordcenter.org to
centerforsighthearing.org. Please make any necessary changes to your
contact list to reflect this change in our email addresses. Thank You

***



This email and any attached files are confidential and intended solely for
the intended recipient(s). If you are not the named recipient you should
not read, distribute, copy or alter this email. Please notify the sender
immediately via email if you have received this email by mistake, then
delete this email from your system. Any views or opinions expressed in this
email are those of the author and do not represent those of the Center for
Sight & Hearing. The Center does not accept liability for the content in
this email or for the results of actions taken based on the information
provided unless that information is confirmed in writing.



Warning: Computer viruses can be transmitted through email. The recipient
should verify this email and any attachments for viruses. Although
precautions have been taken to make sure no viruses are present in this
email, the Center does not accept responsibility for any loss or damage that
arises from the use of this email or attachments.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201111
01/e991a29d/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: JAWS dictionary

Lisle, Ted (CHFS DMS)
 

I don't think I've ever bridged that big a gap, but see no reason why it
wouldn't work. A few little glitches crept in around JAWS 10, but
copying the JDF file should pose no problems.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Joni Colver
Sent: Tuesday, November 01, 2011 3:26 PM
To: Jfw@lists.the-jdh.com
Subject: JAWS dictionary

I am currently using a work computer with JAWS 6 installed on it. I am
apparently going to be getting a new computer from my employer, and I
know a
later version of JAWS will be installed, although I don't know which
one. I
have a lot of dictionary entries in the JAWS 6 version and I really need

them for work. Is there any way I can copy that file from the current
work
computer and put it into the new version of JAWS when I receive that
computer? I don't know if it would be possible or wise to put a JAWS 6
jdf
file into JAWS 11 or 12 or whatever version of JAWS I am going to work
with.

If this is not possible, is there a way I can get a list of the
dictionary
entries onto the clipboard and paste them somewhere so I know what I
have
added, or will I have to arrow through the list one by one and write
them
down? That could be quite a task. Thanks in advance for any help.

Joni


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


JAWS dictionary

Joni Colver <earlybird@...>
 

I am currently using a work computer with JAWS 6 installed on it. I am
apparently going to be getting a new computer from my employer, and I know a
later version of JAWS will be installed, although I don't know which one. I
have a lot of dictionary entries in the JAWS 6 version and I really need
them for work. Is there any way I can copy that file from the current work
computer and put it into the new version of JAWS when I receive that
computer? I don't know if it would be possible or wise to put a JAWS 6 jdf
file into JAWS 11 or 12 or whatever version of JAWS I am going to work with.

If this is not possible, is there a way I can get a list of the dictionary
entries onto the clipboard and paste them somewhere so I know what I have
added, or will I have to arrow through the list one by one and write them
down? That could be quite a task. Thanks in advance for any help.

Joni


Re: Text columns in microsoft word

Ann Byrne
 

You're in Word? Alt-down arrow should do it.

At 01:52 PM 11/1/2011, you wrote:
I have a document with two text columns, not to be confused with columns in a table.
How do I navigate from one column to the other?
Brian



_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com