Date   

Re: Jaws and citric

Naomi Bolter <Naomi.Bolter@...>
 

Thanks so much for this!
We are running windows but not 7, it's an ancient Winndows. My home pc
is 7 though.

Thanks again, I will look into it all!


Regards
Naomi Bolter

Project officer
Strategic capability unit

Level 10 83 Clarence Street

P 82954618
E naomi.bolter@facs.nsw.gov.au

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Marquette, Ed
Sent: Monday, 13 February 2012 08:05 PM
To: The Jaws for Windows support list.
Subject: RE: Jaws and citric

Well, I'm going from memory here, but here is what I recall.
You need to have JAWS running both on your home machine and on a server
at work (not your work desktop, a server). So, you will need to get
your IT professionals involved.
Second, be prepared for headaches by the score. Making it work became
such a problem at my old firm that I had to switch to Window-Eyes. We
spent hours on the phone with escalation at Freedom Scientific.
When I got to my new firm, our Web-based document management system
didn't play nicely with Window-Eyes. Consequently, I switched back to
JAWS.
While we were on Windows XP, we used a system called FireBox (that's
FireBox, not FireFox). It allowed a remote connection for data, but all
the processing was local. I think FireBox was a Citrix product. It
just worked. No remote installation of JAWS was needed, and I didn't
have to have our IT Department install and maintain a copy of JAWS on
some server.
Now that we are on Windows 7, we don't have to load anything. IT IS
WONDERFUL! The connection happens magically.
Right now, I'm at a convention in Las Vegas. I'm sending you this
message in Outlook running on my local machine, but I'm simultaneously
and transparently connected to the firm's Exchange Server.
So, my advice would be to check with your employer's IT Department. If
you are running Windows 7, connecting remotely may be easier than you
think, and avoiding Citrix is a consummation devoutly to be desired.



-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Naomi Bolter
Sent: Sunday, February 12, 2012 11:21 PM
To: Jfw@lists.the-jdh.com
Subject: Jaws and citric

Hi guys,



I'd like to remote into my work computer network, from home with Jaws
13. I tried and failed.

It brings my outlook up, but Jaws doesn't seem to be able to read the
mail.

Anyone know what I'm doing wrong?



Any help will be greatly appreciated so many thanks in advance.





Regards

Naomi Bolter



Project officer

Strategic capability unit



Level 10 83 Clarence Street



P 82954618

E naomi.bolter@facs.nsw.gov.au



==========================================================

Security Statement

This email may be confidential and contain privileged information. If
you are not the intended recipient you must not use, disclose, copy or
distribute this email, including any attachments. Confidentiality and
legal privilege attached to this communication are not waived or lost by
reason of mistaken delivery to you. If you have received the email in
error please delete and notify the sender. Any views expressed in this
email are those of the author and do not necessarily represent those of
the department, except where the sender expressly, and with authority,
states them to be the views of the Department of Family and Community
Services NSW. The department does not represent, warrant or guarantee
that the integrity of this email has been maintained, or that the
communication is free of error, virus, interception, inference or
interference.

==========================================================
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20
120213/619a653a/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
########################################################################
#####################################
ANY FEDERAL TAX ADVICE CONTAINED IN THIS MESSAGE SHOULD NOT BE USED OR
REFERRED TO IN THE PROMOTING, MARKETING OR
RECOMMENDING OF ANY ENTITY, INVESTMENT PLAN OR ARRANGEMENT, AND SUCH
ADVICE IS NOT INTENDED OR WRITTEN TO BE USED,
AND CANNOT BE USED, BY A TAXPAYER FOR THE PURPOSE OF AVOIDING PENALTIES
UNDER THE INTERNAL REVENUE CODE.
########################################################################
#####################################
This E-mail message is confidential, is intended only for the named
recipient(s) above and may contain information
that is privileged, attorney work product or otherwise protected by
applicable law. If you have received this
message in error, please notify the sender at 402-346-6000 and delete
this E-mail message.
Thank you.
########################################################################
#####################################

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
==========================================================

Security Statement

This email may be confidential and contain privileged information. If you are not the intended recipient you must not use, disclose, copy or distribute this email, including any attachments. Confidentiality and legal privilege attached to this communication are not waived or lost by reason of mistaken delivery to you. If you have received the email in error please delete and notify the sender. Any views expressed in this email are those of the author and do not necessarily represent those of the department, except where the sender expressly, and with authority, states them to be the views of the Department of Family and Community Services NSW. The department does not represent, warrant or guarantee that the integrity of this email has been maintained, or that the communication is free of error, virus, interception, inference or interference.

==========================================================


Re: Jaws and citric

Naomi Bolter <Naomi.Bolter@...>
 

Hi, so do I! I need it for work.


Regards
Naomi Bolter

Project officer
Strategic capability unit

Level 10 83 Clarence Street

P 82954618
E naomi.bolter@facs.nsw.gov.au

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Kimber Gardner
Sent: Monday, 13 February 2012 10:36 PM
To: The Jaws for Windows support list.
Subject: Re: Jaws and citric

I never got citrix to work with jaws. It was total nightmare from
beginning to end (when I gave up). Freedom Scientific was no help at
all.

I hope you have better luck than I did.

Kim

On 2/13/12, Naomi Bolter <Naomi.Bolter@facs.nsw.gov.au> wrote:
Hi guys,



I'd like to remote into my work computer network, from home with Jaws
13. I tried and failed.

It brings my outlook up, but Jaws doesn't seem to be able to read the
mail.

Anyone know what I'm doing wrong?



Any help will be greatly appreciated so many thanks in advance.





Regards

Naomi Bolter



Project officer

Strategic capability unit



Level 10 83 Clarence Street



P 82954618

E naomi.bolter@facs.nsw.gov.au



==========================================================

Security Statement

This email may be confidential and contain privileged information. If
you
are not the intended recipient you must not use, disclose, copy or
distribute this email, including any attachments. Confidentiality and
legal
privilege attached to this communication are not waived or lost by
reason of
mistaken delivery to you. If you have received the email in error
please
delete and notify the sender. Any views expressed in this email are
those of
the author and do not necessarily represent those of the department,
except
where the sender expressly, and with authority, states them to be the
views
of the Department of Family and Community Services NSW. The department
does
not represent, warrant or guarantee that the integrity of this email
has
been maintained, or that the communication is free of error, virus,
interception, inference or interference.

==========================================================
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20
120213/619a653a/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
Kimberly

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
==========================================================

Security Statement

This email may be confidential and contain privileged information. If you are not the intended recipient you must not use, disclose, copy or distribute this email, including any attachments. Confidentiality and legal privilege attached to this communication are not waived or lost by reason of mistaken delivery to you. If you have received the email in error please delete and notify the sender. Any views expressed in this email are those of the author and do not necessarily represent those of the department, except where the sender expressly, and with authority, states them to be the views of the Department of Family and Community Services NSW. The department does not represent, warrant or guarantee that the integrity of this email has been maintained, or that the communication is free of error, virus, interception, inference or interference.

==========================================================


Re: volume

Holger Fiallo <holgerfiallo@...>
 

Yes. However when the jaws is very low it is hard to find it.

-----Original Message-----
From: David
Sent: Monday, February 13, 2012 3:26 PM
To: 'The Jaws for Windows support list.'
Subject: RE: volume

Hello there;
I don't think you can do this?
Yes you can have the sound show in the system tray,
But, I don't think you can actually pinn the volume to taskbar.
Isn't it just as easy to insert+f11,
And
Navigate to the speakers?

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Alex Stone
Sent: Monday, February 13, 2012 1:43 PM
To: 'The Jaws for Windows support list.'
Subject: RE: volume

I'm not sure you can do this to the volume control. I seem to remember that
there's a checkbox in start menu and taskbar properties which will place the
volume control in the system tray.
Cheers
Alex

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Kimsan
Sent: 13 February 2012 16:16
To: 'The Jaws for Windows support list.'
Subject: RE: volume

Press applications key or Shift F 10. Arrow up or down until you hear pin to
task bar and press enter.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Holger Fiallo
Sent: Saturday, February 11, 2012 2:54 PM
To: JFW
Subject: volume

Hi,How do I pin volume to the task next to IE, window media player? Using
jaws 13, window home 64.

Holger Fiallo
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201202
11/22e7ff6e/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Spotify problem

Alex Stone <alexstone871@...>
 

I used to have some scripts for Spotify, but they didn't seem to do much
good, and I can't remember where I got them from. I no longer have them. I
don't use Spotify anymore either.
Cheers
Alex

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of paul faucheux
Sent: 13 February 2012 18:00
To: The Jaws for Windows support list.
Subject: spotify problem

hi this is paul faucheux. i am having a problem with spotify. i cant
seem to navigate the spotify window. how can i get around this problem.
what if any thing can i do to fix this. do i need scripts or what. i
have scripts but there either incomplete or in a foreign language. can
yall please help.

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: volume

David <davidwhitehead1957@...>
 

Hello there;
I don't think you can do this?
Yes you can have the sound show in the system tray,
But, I don't think you can actually pinn the volume to taskbar.
Isn't it just as easy to insert+f11,
And
Navigate to the speakers?

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Alex Stone
Sent: Monday, February 13, 2012 1:43 PM
To: 'The Jaws for Windows support list.'
Subject: RE: volume

I'm not sure you can do this to the volume control. I seem to remember that
there's a checkbox in start menu and taskbar properties which will place the
volume control in the system tray.
Cheers
Alex

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Kimsan
Sent: 13 February 2012 16:16
To: 'The Jaws for Windows support list.'
Subject: RE: volume

Press applications key or Shift F 10. Arrow up or down until you hear pin to
task bar and press enter.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Holger Fiallo
Sent: Saturday, February 11, 2012 2:54 PM
To: JFW
Subject: volume

Hi,How do I pin volume to the task next to IE, window media player? Using
jaws 13, window home 64.

Holger Fiallo
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201202
11/22e7ff6e/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: volume

Alex Stone <alexstone871@...>
 

I'm not sure you can do this to the volume control. I seem to remember that
there's a checkbox in start menu and taskbar properties which will place the
volume control in the system tray.
Cheers
Alex

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Kimsan
Sent: 13 February 2012 16:16
To: 'The Jaws for Windows support list.'
Subject: RE: volume

Press applications key or Shift F 10. Arrow up or down until you hear pin to
task bar and press enter.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Holger Fiallo
Sent: Saturday, February 11, 2012 2:54 PM
To: JFW
Subject: volume

Hi,How do I pin volume to the task next to IE, window media player? Using
jaws 13, window home 64.

Holger Fiallo
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201202
11/22e7ff6e/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: jaws doesn't announce address of current webpage

Bhavesh
 

Hi there,

pressing F11 worked for me.

On 2/13/12, Adrian Spratt <Adrian@adrianspratt.com> wrote:
Try pressing F11. It's the full screen toggle. In my experience, turning it
off has brought back the address to the address bar.

An alternative that used to work for me but didn't the last time is to go to
the address bar, then double click with the left mouse button (slash on the
numpad in keyboard layout).

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of BHAVESH
Sent: Monday, February 13, 2012 11:28 AM
To: The Jaws for Windows support mailing list
Subject: jaws doesn't announce address of current webpage

Hi list,

i am currently using jaws12 and 13 on a dell machine with windows7
proffessional 32bit and IE8.
from any page, if i go to address bar by pressing alt+D in internet
explorer, jaws only says "address edit. alt+p", but doesn't announce the web
address. please help.


--
with best regards,
Bhavesh.
Message composed on Dell vostro1440, using jaws for windows screen reader.

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
--
with best regards,
Bhavesh.
Message composed on Dell vostro1440, using jaws for windows screen reader.


Re: [Bulk] jaws doesn't announce address of current webpage

Bhavesh
 

Hi Dave,
my laptop's screen is maximised, but stil the same problem.


Thanks and regards,
bhavesh.
Email produced on nokia c5-00 using a symbian based screen reader.
GSM
+919029059211
skype:
bhavesh.patel499
windows live
bhau20@live.com
twitter
bhau20

-original message-
Subject: Re: [Bulk] jaws doesn't announce address of current webpage
From: "Farfar in the Sound Booth" <dgcarlson@sbcglobal.net>
Date: 13/02/2012 10:30 pm

Try maximizing the screen.

Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7

----- Original Message -----
From: "BHAVESH" <charmingbhavesh@gmail.com>
To: "The Jaws for Windows support mailing list" <jfw@lists.the-jdh.com>
Sent: Monday, February 13, 2012 08:27
Subject: [Bulk] jaws doesn't announce address of current webpage


Hi list,

i am currently using jaws12 and 13 on a dell machine with windows7
proffessional 32bit and IE8.
from any page, if i go to address bar by pressing alt+D in internet
explorer, jaws only says "address edit. alt+p", but doesn't announce
the web address. please help.


--
with best regards,
Bhavesh.
Message composed on Dell vostro1440, using jaws for windows screen reader.

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] Repairing JAWS 13

Cristóbal
 

This is exactly what I do. My internet failed once on automatic update and
it took me forever to fix the Jaws semi-install. Since then, I've always
gone straight to the FS site and downloaded the executable to my harddrive
and run the install from there. I've got about 4 or so previous .exe JFW
files. I usually wait a few releases before deleting the older versions just
to be sure there isn't any major issue with a new release.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Farfar in the Sound Booth
Sent: Monday, February 13, 2012 10:02 AM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] Re: Repairing JAWS 13

Rik,

I've generally had poor-to-disastrous results when updating JAWS directly
from the Help/Check for Updates feature. And that was using XP Pro or
Windows 7. So I never do it that way now. I always go to the FS web site and
download the current version and save it to my hard drive.

I keep my "Notify updates" feature turned off.

This also has the added benefit of storing all the past versions, in case an
update turns out to be a lemon. Then I can uninstall and reinstall the
version I had before. FS removes the prior update when a new one is pushed
out.

Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7


----- Original Message -----
From: <rixmix2009@gmail.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Monday, February 13, 2012 09:33
Subject: [Bulk] Re: Repairing JAWS 13


I have installed the JAWS update on a desktop running Windows 7 Ultimate
without incident.

But when installing the update on my Netbook running Windows XP, I did
encounter something different.
I was using the update through JAWS feature.
And when it came to the certain downloading point, my antivirus program, the
latest AVG 2012, hung up, suspecting the JAWS executable file was a threat.
After a moment or 2 of o dear me, I went ahead and said to Allow.

Seemingly, the update worked with no other problem and the perceived threat
was of no consequence.

BTW, on the desktop running Windows 7, I am using Microsoft Security
Essentials.

But I wonder if anyone else had this.
Or if my trusting ways could have hurt me.

Thanks.
Rik


-----Original Message-----
From: Chris Smart
Sent: Monday, February 13, 2012 8:55 AM
To: The Jaws for Windows support list.
Subject: Re: Repairing JAWS 13

a search at freedomscientific.com for the phrase "repair jaws" got
me this:
http://www.freedomscientific.com/fs_support/BulletinView.asp?QC=1057

Alternatively, you can go into Jaws Help, Getting Started with
Jaws, and hit enter on Maintenance Setup.
Chris


At 07:20 AM 2/13/2012, you wrote:
I was trying to download the newest update to JAWS 13 on my net book
computer. It seemed to be taking a very long time, and then it said it
couldn't complete the update. It suggested I do a repair of JAWS 13 and
try again. How do I repair JAWS 13?

Cindy
Trust in the LORD with all your heart
and lean not on your own understanding;
in all your ways submit to him,
and he will make your paths straight.
Proverbs 3:5-6

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
--------------------------------------------------
CTS MASTERING: PROFESSIONAL MIXING AND MASTERING!
http://www.ctsmastering.com

Dropbox: Have your stuff when you need it. 2GB is free
http://db.tt/bQ2GuIt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] Repairing JAWS 13

Dave...
 

Rik,

I've generally had poor-to-disastrous results when updating JAWS directly
from the Help/Check for Updates feature. And that was using XP Pro or
Windows 7. So I never do it that way now. I always go to the FS web site and
download the current version and save it to my hard drive.

I keep my "Notify updates" feature turned off.

This also has the added benefit of storing all the past versions, in case an
update turns out to be a lemon. Then I can uninstall and reinstall the
version I had before. FS removes the prior update when a new one is pushed
out.

Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7

----- Original Message -----
From: <rixmix2009@gmail.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Monday, February 13, 2012 09:33
Subject: [Bulk] Re: Repairing JAWS 13


I have installed the JAWS update on a desktop running Windows 7 Ultimate
without incident.

But when installing the update on my Netbook running Windows XP, I did
encounter something different.
I was using the update through JAWS feature.
And when it came to the certain downloading point, my antivirus program, the
latest AVG 2012, hung up, suspecting the JAWS executable file was a threat.
After a moment or 2 of o dear me, I went ahead and said to Allow.

Seemingly, the update worked with no other problem and the perceived threat
was of no consequence.

BTW, on the desktop running Windows 7, I am using Microsoft Security
Essentials.

But I wonder if anyone else had this.
Or if my trusting ways could have hurt me.

Thanks.
Rik


-----Original Message-----
From: Chris Smart
Sent: Monday, February 13, 2012 8:55 AM
To: The Jaws for Windows support list.
Subject: Re: Repairing JAWS 13

a search at freedomscientific.com for the phrase "repair jaws" got
me this:
http://www.freedomscientific.com/fs_support/BulletinView.asp?QC=1057

Alternatively, you can go into Jaws Help, Getting Started with
Jaws, and hit enter on Maintenance Setup.
Chris


At 07:20 AM 2/13/2012, you wrote:
I was trying to download the newest update to JAWS 13 on my net book
computer. It seemed to be taking a very long time, and then it said it
couldn't complete the update. It suggested I do a repair of JAWS 13 and
try again. How do I repair JAWS 13?

Cindy
Trust in the LORD with all your heart
and lean not on your own understanding;
in all your ways submit to him,
and he will make your paths straight.
Proverbs 3:5-6

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
--------------------------------------------------
CTS MASTERING: PROFESSIONAL MIXING AND MASTERING!
http://www.ctsmastering.com

Dropbox: Have your stuff when you need it. 2GB is free
http://db.tt/bQ2GuIt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


spotify problem

Paul Faucheux
 

hi this is paul faucheux. i am having a problem with spotify. i cant seem to navigate the spotify window. how can i get around this problem. what if any thing can i do to fix this. do i need scripts or what. i have scripts but there either incomplete or in a foreign language. can yall please help.


Re: jaws doesn't announce address of current webpage

Adrian Spratt
 

Try pressing F11. It's the full screen toggle. In my experience, turning it
off has brought back the address to the address bar.

An alternative that used to work for me but didn't the last time is to go to
the address bar, then double click with the left mouse button (slash on the
numpad in keyboard layout).

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of BHAVESH
Sent: Monday, February 13, 2012 11:28 AM
To: The Jaws for Windows support mailing list
Subject: jaws doesn't announce address of current webpage

Hi list,

i am currently using jaws12 and 13 on a dell machine with windows7
proffessional 32bit and IE8.
from any page, if i go to address bar by pressing alt+D in internet
explorer, jaws only says "address edit. alt+p", but doesn't announce the web
address. please help.


--
with best regards,
Bhavesh.
Message composed on Dell vostro1440, using jaws for windows screen reader.

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Repairing JAWS 13

rixmix2009@...
 

I have installed the JAWS update on a desktop running Windows 7 Ultimate without incident.

But when installing the update on my Netbook running Windows XP, I did encounter something different.
I was using the update through JAWS feature.
And when it came to the certain downloading point, my antivirus program, the latest AVG 2012, hung up, suspecting the JAWS executable file was a threat.
After a moment or 2 of o dear me, I went ahead and said to Allow.

Seemingly, the update worked with no other problem and the perceived threat was of no consequence.

BTW, on the desktop running Windows 7, I am using Microsoft Security Essentials.

But I wonder if anyone else had this.
Or if my trusting ways could have hurt me.

Thanks.
Rik

-----Original Message-----
From: Chris Smart
Sent: Monday, February 13, 2012 8:55 AM
To: The Jaws for Windows support list.
Subject: Re: Repairing JAWS 13

a search at freedomscientific.com for the phrase "repair jaws" got
me this:
http://www.freedomscientific.com/fs_support/BulletinView.asp?QC=1057

Alternatively, you can go into Jaws Help, Getting Started with
Jaws, and hit enter on Maintenance Setup.
Chris


At 07:20 AM 2/13/2012, you wrote:
I was trying to download the newest update to JAWS 13 on my net book computer. It seemed to be taking a very long time, and then it said it couldn't complete the update. It suggested I do a repair of JAWS 13 and try again. How do I repair JAWS 13?

Cindy
Trust in the LORD with all your heart
and lean not on your own understanding;
in all your ways submit to him,
and he will make your paths straight.
Proverbs 3:5-6

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
--------------------------------------------------
CTS MASTERING: PROFESSIONAL MIXING AND MASTERING!
http://www.ctsmastering.com

Dropbox: Have your stuff when you need it. 2GB is free
http://db.tt/bQ2GuIt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Outlook 2010 search and JAWS 13

John Martyn
 

I use F3
John

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Kimsan
Sent: Monday, February 13, 2012 8:14 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Outlook 2010 search and JAWS 13

Shift f 4 does not work for me...

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Dondi
Sent: Sunday, February 12, 2012 9:25 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Outlook 2010 search and JAWS 13

Hi Adrian,

This is what I did in Outlook 2010.
Press F4, type in search string and press enter.
Press escape until I'm back to the email of interest.
Press shift+F4, and Outlook will jump to the search string if found.
Pressing shift+F4 after this will jump to every instants there is.
If I want, I can open any email and do the same search with just shift+F4,
because the search string does not clear out.

Thanks for all the help this morning.

Dondi


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Adrian Spratt
Sent: Sunday, February 12, 2012 8:45 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Outlook 2010 search and JAWS 13

Dondi, keep in mind that I'm still using Outlook 2003. So in my case:

1. Open a message.

2. Press F4.

3. Type the search string and press enter. Focus will land on the string, if
it appears in the message.

As I recall, Ed said to press shift-F4 to find a second instance of a search
string. Try that in Outlook 2010. It hasn't worked for me in Outlook 2003.
Instead, I press F4 again, hear the same search string and press enter.

Note that once I close a message, the search string disappears, so I have to
re-enter it if I want to find that same search string in another message.

Also, I don't find Outlook searches as reliable as they are in, say, MS Word
or WordPerfect. It could be due to any number of factors, such as slight
variations in how the targeted text appears.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Dondi
Sent: Sunday, February 12, 2012 10:34 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Outlook 2010 search and JAWS 13

Hi Adrian,

All of this is more then I could have hoped for, I can actually find emails
and info now. Does anyone have a procedure for F4 and this searching in the
body of the message? I tried it but I'm not sure I understand what's
actually going on.

Dondi

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Adrian Spratt
Sent: Sunday, February 12, 2012 7:16 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Outlook 2010 search and JAWS 13

David, these steps work in Outlook 2003, so I expect the following procedure
also applies in Outlook 2007 and 2010. As has been pointed out many times on
this list, subject lines don't always correspond to the subject of the
message. To find messages containing a key word or phrase, I do the
following:

1. Control-shift-f for find a message.

2. Tab once, arrow down once, then shift-tab once. These three actions put
focus in an edit field.

3. Type the search string exactly as you expect it to appear in a message
and press enter.

4. When JAWS stops verbalizing "Stop" and switches to "Find now button,"
press the spacebar. (this step also applies to the procedures you outlined.
I find it stabilizes the rest of the operation.)

5. Follow the procedures you outline for navigating the list of relevant
messages and reading them.

Note. As we learned from Ed Marquette, once in a message, use F4 to find the
search string.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of David
Sent: Sunday, February 12, 2012 7:32 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Outlook 2010 search and JAWS 13

Using Find In MSOutlook2010 Using Jaws Locating All Messages By One Sender:
This will work in any mailbox E.g, in-box, sent-box etc.
1. Press ctrl+shift+the letter "f"=advance-find.
2. Tab three times=from....edit.
3. Type in a sender's first or last name.
4. Press enter.
5. Press the f6key and you are put into the list of messages by the sender
you searched for.
6. If you open a message to read it, press escape once to close it. Then
move to the next one to read.
7. If you open a message to read and do not wish to read any more, press
escape twice and you are placed back in to the original location were the
search was started. This means if you were in the in-box when starting the
search, pressing escape twice will return you back to the in-box. Pressing
escape once will only return you to the list of messages found in the
search.

***

II. Searching For A Specific Topic In A Subject Field:
1. Press ctrl+shift+the letter "f".2. Type a word that would be found in the
subject line you are searching for.
3. Press enter.
4. Press f6 and you are put into the list of messages containing the subject
line searched for.
5. If you open a message to read it, press escape once to close it. Then
move to the next one to read.
6. If you open a message to read and do not wish to read any more, press
escape twice and you are placed back in to the original location were the
search was started. This means if you were in the in-box when starting the
search, pressing escape twice will return you back to the in-box. Pressing
escape once will only return you to the list of messages found in the
search.

If someone is using MSOutlook2007, Could they let me know if these steps
apply?


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] jaws doesn't announce address of current webpage

Dave...
 

Try maximizing the screen.

Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7

----- Original Message -----
From: "BHAVESH" <charmingbhavesh@gmail.com>
To: "The Jaws for Windows support mailing list" <jfw@lists.the-jdh.com>
Sent: Monday, February 13, 2012 08:27
Subject: [Bulk] jaws doesn't announce address of current webpage


Hi list,

i am currently using jaws12 and 13 on a dell machine with windows7
proffessional 32bit and IE8.
from any page, if i go to address bar by pressing alt+D in internet
explorer, jaws only says "address edit. alt+p", but doesn't announce
the web address. please help.


--
with best regards,
Bhavesh.
Message composed on Dell vostro1440, using jaws for windows screen reader.

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


jaws doesn't announce address of current webpage

Bhavesh
 

Hi list,

i am currently using jaws12 and 13 on a dell machine with windows7
proffessional 32bit and IE8.
from any page, if i go to address bar by pressing alt+D in internet
explorer, jaws only says "address edit. alt+p", but doesn't announce
the web address. please help.


--
with best regards,
Bhavesh.
Message composed on Dell vostro1440, using jaws for windows screen reader.


Re: jaws double speaks in some text edit fields

dave grossoehme
 

Is it only in a search field that this happens as far as repeated speech?
Your Friend Dave


--------------------------------------------------
From: "Nickus de Vos" <bigboy529@gmail.com>
Sent: Monday, February 13, 2012 2:28 AM
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Subject: jaws double speaks in some text edit fields

Hi all, I'm using windows 7 with jaws 13. A week or so ago something
started happening on the internet in text edit fields, I don't know if
it happend after a update or if I changed some settings. If I type
something in to a text edit field e.g. in to google search, it repeats
what ever I typed twice and if I arrow through the typed word it again
each time reads the entire search term twice before reading the
letter. e.g. if I type jaws in to google search and tab down to the
search button it will say "jaws, Jaws" and if I arrow through the word
jaws in the text edit field, it would say jaws, jaws with each arrow
press and then only say the letter J A W S. Any ideas how to fix this
or what the problem is? It's very anoying.
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: volume

Kimsan <kimsansong@...>
 

Press applications key or Shift F 10. Arrow up or down until you hear pin to
task bar and press enter.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Holger Fiallo
Sent: Saturday, February 11, 2012 2:54 PM
To: JFW
Subject: volume

Hi,How do I pin volume to the task next to IE, window media player? Using
jaws 13, window home 64.

Holger Fiallo
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201202
11/22e7ff6e/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Outlook 2010 search and JAWS 13

Kimsan <kimsansong@...>
 

Shift f 4 does not work for me...

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Dondi
Sent: Sunday, February 12, 2012 9:25 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Outlook 2010 search and JAWS 13

Hi Adrian,

This is what I did in Outlook 2010.
Press F4, type in search string and press enter.
Press escape until I'm back to the email of interest.
Press shift+F4, and Outlook will jump to the search string if found.
Pressing shift+F4 after this will jump to every instants there is.
If I want, I can open any email and do the same search with just shift+F4,
because the search string does not clear out.

Thanks for all the help this morning.

Dondi


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Adrian Spratt
Sent: Sunday, February 12, 2012 8:45 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Outlook 2010 search and JAWS 13

Dondi, keep in mind that I'm still using Outlook 2003. So in my case:

1. Open a message.

2. Press F4.

3. Type the search string and press enter. Focus will land on the string, if
it appears in the message.

As I recall, Ed said to press shift-F4 to find a second instance of a search
string. Try that in Outlook 2010. It hasn't worked for me in Outlook 2003.
Instead, I press F4 again, hear the same search string and press enter.

Note that once I close a message, the search string disappears, so I have to
re-enter it if I want to find that same search string in another message.

Also, I don't find Outlook searches as reliable as they are in, say, MS Word
or WordPerfect. It could be due to any number of factors, such as slight
variations in how the targeted text appears.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Dondi
Sent: Sunday, February 12, 2012 10:34 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Outlook 2010 search and JAWS 13

Hi Adrian,

All of this is more then I could have hoped for, I can actually find emails
and info now. Does anyone have a procedure for F4 and this searching in the
body of the message? I tried it but I'm not sure I understand what's
actually going on.

Dondi

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Adrian Spratt
Sent: Sunday, February 12, 2012 7:16 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Outlook 2010 search and JAWS 13

David, these steps work in Outlook 2003, so I expect the following procedure
also applies in Outlook 2007 and 2010. As has been pointed out many times on
this list, subject lines don't always correspond to the subject of the
message. To find messages containing a key word or phrase, I do the
following:

1. Control-shift-f for find a message.

2. Tab once, arrow down once, then shift-tab once. These three actions put
focus in an edit field.

3. Type the search string exactly as you expect it to appear in a message
and press enter.

4. When JAWS stops verbalizing "Stop" and switches to "Find now button,"
press the spacebar. (this step also applies to the procedures you outlined.
I find it stabilizes the rest of the operation.)

5. Follow the procedures you outline for navigating the list of relevant
messages and reading them.

Note. As we learned from Ed Marquette, once in a message, use F4 to find the
search string.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of David
Sent: Sunday, February 12, 2012 7:32 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Outlook 2010 search and JAWS 13

Using Find In MSOutlook2010 Using Jaws Locating All Messages By One Sender:
This will work in any mailbox E.g, in-box, sent-box etc.
1. Press ctrl+shift+the letter "f"=advance-find.
2. Tab three times=from....edit.
3. Type in a sender's first or last name.
4. Press enter.
5. Press the f6key and you are put into the list of messages by the sender
you searched for.
6. If you open a message to read it, press escape once to close it. Then
move to the next one to read.
7. If you open a message to read and do not wish to read any more, press
escape twice and you are placed back in to the original location were the
search was started. This means if you were in the in-box when starting the
search, pressing escape twice will return you back to the in-box. Pressing
escape once will only return you to the list of messages found in the
search.

***

II. Searching For A Specific Topic In A Subject Field:
1. Press ctrl+shift+the letter "f".2. Type a word that would be found in the
subject line you are searching for.
3. Press enter.
4. Press f6 and you are put into the list of messages containing the subject
line searched for.
5. If you open a message to read it, press escape once to close it. Then
move to the next one to read.
6. If you open a message to read and do not wish to read any more, press
escape twice and you are placed back in to the original location were the
search was started. This means if you were in the in-box when starting the
search, pressing escape twice will return you back to the in-box. Pressing
escape once will only return you to the list of messages found in the
search.

If someone is using MSOutlook2007, Could they let me know if these steps
apply?


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Repairing JAWS 13

Chris Smart <csmart8@...>
 

Yep, go to
http://www.freedomscientific.com/downloads/jaws/JAWS-whats-new.asp

and find the heading "download Jaws 13".

Chris
--------------------------------------------------
CTS MASTERING: PROFESSIONAL MIXING AND MASTERING!
http://www.ctsmastering.com

Dropbox: Have your stuff when you need it. 2GB is free
http://db.tt/bQ2GuIt