Date   

Re: JAWS not speaking at all on starting system

 

Do you have fast startup turned on? If so this could be your problem. If Jaws isn't coming up reliable and you are sure it is correctly set up to start at login I would disable this in Jaws Options and set up Narrator to start at the login screen and see if that works better. You can still set Jaws to start again after you log in, but use Narrator just for entering your password.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of turab chimthanawala
Sent: October 25, 2021 11:03 PM
To: jfw <jfw@groups.io>
Subject: JAWS not speaking at all on starting system

Hi all,
I use Windows 10, JAWS 2021. Though I have chosen the option for JAWS to start automatically, on some occasions, it does not speak at all.
This happens both on Starting as well as from Sleep mode. On checking through sighted assistance, my microphone is not muted.
Only option left is to restarting and keep doing till I hear JAWS speak.


--
Regards,

Turab Chimthanawala
(ACS, LLM)
+91-8087813609
turabhvc@gmail.com


Re: email service issue

 

You can set up an Outlook.com account which is entirely free and which also will never change. I have had the sieghard@live.ca email address I use for this list and others for I think 12 or 13 years now and all I ever did was set it up back then.
The same of course goes for Gmail addresses, you decide if you want to go with Google or Microsoft, I prefer Microsoft's Exchange Active Sync protocol over IMAP, but I think her initial issue had to do with messages getting filtered out by Google and Microsoft will do this as well and it's up to you to tweak the SPAM/Junk Mail settings so that hopefully legitimate messages won't get filtered. I still check my Junk Mail folder in Outlook daily and if I find the odd message which should not be in there I mark it as not junk which moves it back to the Inbox and hopefully avoids the issue down the road. Similarly if I have junk mail in my Inbox I block the sender and for me this works great, but it may take a bit of time.
I think a custom domain is not for the majority of people, if you want to set up a domain for your family, for a small business or even just yourself and you want to administer it and have the know-how that is one thing, but I would not recommend it to most users simply because there is little reason why one should pay $50 or $100 a year for something which isn't really necessary.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: October 25, 2021 10:38 PM
To: main@jfw.groups.io
Subject: Re: email service issue

Why don't you set up a domain and use startmail, fastmail or any of a number of providers? Its not free, but you get what you want and you can change providers without changing your Email address.

On Mon, 25 Oct 2021 16:09:29 -0400,
Madison Martin wrote:

Okay, so how do I set up an Outlook.com account?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant,
Robin via groups.io
Sent: October 25, 2021 3:01 PM
To: main@jfw.groups.io
Subject: Re: email service issue

Madison,
I have a free Outlook.com address for personal email It filters a tiny bit, but it generally seems pretty accurate at sending true spam to the junk filter. I only access my email through Outlook 2016 and via the native app on my iPhone, Sometimes a message will show in my inbox on the iphone, but when I open my inbox in Outlook on my laptop, the message will move to Junk; I think because I have marked that sender as Junk from within Outlook 2016. I thought most of these services had ways you can set your filtering level on the web; I don't seem to miss any message.



KeyCorp Public

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association ("KeyBank N.A."). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@key.com with 'No Promotional E-mails' in the SUBJECT line.











--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


Re: email service issue

 

It all depends on what you want your website to do, is it an informational website or are you selling product?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Ingram
Sent: October 25, 2021 10:54 PM
To: main@jfw.groups.io
Subject: Re: email service issue

How would i go about to setup a domain name?  I'm thinking about a website but who can create the website for me.
-----Original Message-----
From:
Sent: Oct 26, 2021 12:37 AM
To:
Subject: Re: email service issue
 
Why don't you set up a domain and use startmail, fastmail or any of a number of providers? Its not free, but you get what you want and you can change providers without changing your Email address.
 
On Mon, 25 Oct 2021 16:09:29 -0400,
Madison Martin wrote:

Okay, so how do I set up an Outlook.com account?

-----Original Message-----
From: main@jfw.groups.io On Behalf Of Van Lant, Robin via groups.io
Sent: October 25, 2021 3:01 PM
To: main@jfw.groups.io
Subject: Re: email service issue

Madison,
I have a free Outlook.com address for personal email It filters a tiny bit, but it generally seems pretty accurate at sending true spam to the junk filter. I only access my email through Outlook 2016 and via the native app on my iPhone, Sometimes a message will show in my inbox on the iphone, but when I open my inbox in Outlook on my laptop, the message will move to Junk; I think because I have marked that sender as Junk from within Outlook 2016. I thought most of these services had ways you can set your filtering level on the web; I don't seem to miss any message.



KeyCorp Public

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@key.com with 'No Promotional E-mails' in the SUBJECT line.











--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?
 
John Covici wb2una
covici@ccs.covici.com


J2022.2110.36 Full Release + What's New

Mike B.
 

Hi All,
 
Here's the full release and what's new in J2022.
 
32 & 64 bit download link:
 
 

What's New in JAWS 2022 Screen Reading Software
 
JAWS 2022 Features
Automatic Settings Import from Previous Releases
 
When upgrading to a new version of JAWS, any custom settings from a previous release are now automatically imported. This includes features such as speech
and braille display settings, custom scripts, dictionary entries, labeled graphics, and any custom settings you created for applications. Unlike previous
releases, the migration process is now silent (no messages or dialog boxes appear) and begins the first time you start the new version. Custom settings
older than the two previous versions will not be imported. If the import is successful, you will only be prompted to configure JAWS startup options.
 
If you do not want settings from a prior version to be migrated to the new version, when performing a new install, there is now a check box on the initial
setup screen where you can choose whether or not to silently migrate settings from the prior version. Clear this check box if you do not want to migrate
settings.
 
New Option to Restore Factory Settings
 
Use the Restore to factory settings item, located in the Options menu of the main JAWS application window, to clear all custom settings that were imported
from a previous release or manually configured. Once all settings are removed, JAWS restarts as if it was a brand new installation.
 
JAWS, ZoomText, and Fusion Discontinues Windows 7 and 8.1 Support
 
In order to keep pace with continued advancements in Microsoft Windows technology, JAWS, Fusion, and ZoomText 2022 will no longer install and run on versions
of Windows earlier than Windows 10. We also continue improving support for Windows 11. Versions of our software will continue to be available for users
of older Windows versions from our Previous Downloads web pages.
 
Improved Performance in Microsoft Office Apps
 
JAWS 2022 offers a number of general improvements when working in Office 365 applications. In particular, users should notice increased responsiveness
when navigating Outlook message lists and working with emails, as well as when editing Word documents.
 
Sound Splitter
 
Earlier in JAWS and Fusion 2021, we introduced a way for users to lower the volume of JAWS speech independently of system audio to help make it easier
to hear audio from other applications. Version 2022 takes this a step further by now allowing those using stereo headsets or speakers to route all JAWS
or Fusion speech to one ear while routing audio from all other applications to the other ear. This helps make it easier to continue getting work done with
JAWS while following along during a Zoom or Teams meeting, a Skype call, or a YouTube video.
 
To split audio:
 
list of 2 items
1. Press INSERT+SPACEBAR followed by V to activate the Volume layer.
2. Press B for Balance, and then do one of the following:
list of 3 items nesting level 1
• Press LEFT ARROW to route JAWS Speech to the left and audio from all other applications to the right.
• Press RIGHT ARROW to route JAWS speech to the right and audio from all other applications to the left.
• Press UP ARROW to restore both JAWS speech and application audio to both channels.
list end nesting level 1
list end
 
Note: Before attempting to split your audio, make sure your headset or speakers are properly oriented. For instance, if you route JAWS speech to the left
and instead hear it in your right ear, your headset is most likely reversed.
 
Once you split your JAWS speech and application audio, it remains in effect until you restart JAWS, or use the command to restore the audio balance.
 
You can also wake up the Voice Assistant and say “Sound Left,” “Sound Right,” or “Sound Balance.” Make sure your microphone is not muted before speaking
these commands. You also may not want to use these commands in apps like Teams or Zoom as other meeting participants will hear you.
 
Frequently Asked Questions
 
Q: I use a stereo Bluetooth headset that includes a microphone for participating in Teams and Zoom calls. Can I split the audio in this situation?
 
Answer: No, splitting the audio will not work in a call when using a Bluetooth headset. This is not a JAWS issue. When connecting to a call in Teams or
Zoom, it switches from a headphone device to a headset device. By design, the headset device works as a mono device, so sound splitting does not work.
If you want to split your audio during a call, we recommend using a wired headset.
 
Q: Can I split my audio if I'm using a stereo Bluetooth headset to just listen to music?
 
Answer: Yes. If you are playing audio from another source such as a YouTube video, the sound splitter works as expected even if you are using a Bluetooth
headset. You will only experience issues with splitting audio when connecting to a Teams or Zoom call using a Bluetooth headset as it changes from a stereo
headphone device to a mono headset device.
 
Q: Does the sound splitter work with external speakers?
 
Answer: Yes, JAWS speech and application audio will split as expected if you are using your computer's internal speakers, or you have external speakers
connected.
 
Q: I currently have JAWS configured to use a different sound device instead of the Windows default sound card. Will I still be able to split the audio?
 
Answer: As long as both JAWS and the other applications playing sound are all routed through the same sound card, the audio will split as expected. If
you use the Sound Cards option under the JAWS Utilities menu to configure JAWS to use a different sound card, JAWS remains routed, but audio from other
apps will be restored to both speakers.
 
New Layered Keystrokes for Selecting a Sound Card for Speech Output
 
In some instances, Windows may switch to a different sound device, causing you to lose speech from JAWS or Fusion. A couple examples of this could be when
you plug in another sound device which becomes the new default or when you are using a Bluetooth headset and you start a call on Teams or Zoom, causing
Windows to switch the sound device.
 
If these situations occur, you can now press INSERT+SPACEBAR, followed by V, and then C to access the new Sound Cards layer. Once in this layer, use UP
or DOWN ARROW to cycle through all sound cards available on your system. JAWS attempts to announce each sound card as you move to it. Once you find the
sound card you want to use for speech, press ESC to exit the layer. Note that the list of available devices does wrap, so continuing to press DOWN ARROW,
cycles through them all.
 
Voice Assistant Improvements
list of 4 items
• The default wake word for JAWS is now “Hey Sharky.”
• When running Fusion, you can now say either "Hey Sharky" or "Hey Zoomy" and the voice assistant knows which features are for JAWS or ZoomText and will
do the appropriate action depending on what you asked. Previously, Fusion users could only access ZoomText features using the voice assistant.
• After selecting text with JAWS or Fusion, you can now say “Hey Sharky, Read Selection” to read the selected content, or “Hey Sharky, Append” to append
the selected text to the clipboard.
• Selecting the Settings option from the Voice Assistant submenu in the JAWS Utilities menu now opens a dedicated Voice Assistant Settings dialog box instead
of taking you to Settings Center.
list end
 
Faster Braille Language Switching for Multi-lingual Users
 
For users who speak multiple languages as well as students who are learning another language, JAWS has supported manual and automatic speech synthesizer
language switching for years. For braille display users needing to switch between languages regularly, the process was not as straight forward., You had
to open Settings Center, and select a specific language and translation options each time you wanted to read or enter text using a different language.
 
To help make this easier for multi-lingual braille users, JAWS and Fusion 2022 introduces braille profiles. A braille profile consists of a translator
mode and associated braille tables for input and output in a specific language. This now allows you to switch the braille language on-the-fly from the
main keyboard, braille display, or using automatic language switching in documents or web pages, as we do with speech. You can also link the braille input
language to the keyboard input language so when you press ALT+SHIFT on your computer's keyboard to switch the language used for typing, the Braille input
language switches with it.
 
To configure profile options, a new Language Profiles dialog box has been added to Settings Center under the Braille > General > Translation group. For
users who only use one language, there is no need to use this dialog box as you can still set your input and output translation settings as you always
have in the main Translation group or the Startup Wizard.
 
Setting Up Preferred Profiles
 
To choose your preferred profiles that you can quickly switch between using a keystroke, do the following:
 
list of 6 items
1. Press INSERT+6 on the number row to open Settings Center.
2. To apply changes to all applications, press CTRL+SHIFT+D to load the JAWS default settings.
3. Type “profiles” without the quotes into the search edit field.
4. Press DOWN ARROW to move to Language Profiles in the search results in the tree view and press SPACEBAR to open the dialog box. You are placed in a
list of profiles that correspond to all braille languages installed with JAWS.
5. Press SPACEBAR on each profile that you want to select as a preferred profile.
6. Select OK to close the dialog box and once more to close Settings Center.
list end
 
After setting up preferred profiles, you can then use the CTRL+SHIFT+WINDOWS+L keystroke, or DOTS 2-3-4-5-7 CHORD on a Focus braille display, to quickly
switch between profiles if you need to read or type text in different languages.
 
You can also set a primary language profile which is always used when JAWS starts. By default, the primary profile always matches the JAWS language. For
instance, English – United States is always used when running the English version of JAWS. To change the primary profile, open the Language Profiles dialog
box, choose the language profile you want from the list, and then select the Set Primary button.
 
Configuring Translation Options for a Specific Profile
 
To configure braille translation input and output settings for a specific language profile, do the following:
 
list of 6 items
1. Press INSERT+6 on the number row to open Settings Center.
2. To apply changes to all applications, press CTRL+SHIFT+D to load the JAWS default settings.
3. Type “profiles” without the quotes into the search edit field.
4. Press DOWN ARROW to move to Language Profiles in the search results in the tree view and press SPACEBAR to open the dialog box. You are placed in a
list of profiles that correspond to all braille languages installed with JAWS.
5. Select the profile you want to configure translation options for and then choose the Details button to open the Profile Details dialog box. Here, you
can:
list of 5 items nesting level 1
• Choose the grade of braille to use when reading and typing contracted braille. The available options depend on the currently selected profile. For instance,
Unified English Braille (UEB) Grade 1 or Grade 2 are not available when configuring the Spanish language profile.
• Choose which translation mode to use. The available choices are to use Computer Braille for both input and output, Computer Braille for input and Contracted
Braille for Output, or Contracted Braille for both input and output. You can also quickly toggle between translation modes for the active profile by using
DOTS 1-2-4-5-7 CHORD on a Focus braille display.
• Select which tables to use if Computer Braille is selected for input or output. This enables you to use different languages for reading and typing text
if needed.
• Choose whether or not capital signs are shown on the braille display when viewing Contracted Braille.
• Choose whether or not the Liblouis computer braille tables are used when reading or typing in Computer Braille.
list end nesting level 1
6. After making your changes, select OK to close the Profile Details dialog box and continue selecting OK to close the Language Profiles dialog box and
Settings Center.
list end
 
Configuring Braille Language Auto Detection
 
If you want JAWS to automatically switch to the appropriate braille language when reading or entering text, do the following:
 
list of 7 items
1. Press INSERT+6 on the number row to open Settings Center.
2. To apply changes to all applications, press CTRL+SHIFT+D to load the JAWS default settings.
3. Type “profiles” without the quotes into the search edit field.
4. Press DOWN ARROW to move to Language Profiles in the search results in the tree view and press SPACEBAR to open the dialog box.
5. Select the Link braille input language to keyboard language check box to have JAWS use the appropriate braille input language that matches the currently
active keyboard language. For example, if you switch the keyboard language to Spanish (ALT+SHIFT), JAWS automatically switches to Spanish braille, so you
can continue entering text from your display in the correct language.
6. Select the Automatic language detection check box to have JAWS use the appropriate braille language that matches the current language of text in a document
or web page. For example, if JAWS detects text in a document written in Spanish, JAWS automatically switches to displaying the text in Spanish braille
using the translation mode settings configured in the Profile Details dialog box for the Spanish profile.
7. Select OK to close the dialog box and once more to close Settings Center.
list end
 
Additional Changes
list of 23 items
• In JAWS and Fusion, added new Quick Settings options for Outlook 365 that let you turn off the announcements for unread, replied, or forwarded. While
in Outlook 365, press INSERT+V for Quick Settings, and then search for "Indicate" to find the 3 options.
• When focused in an Outlook message list, such as the Inbox, the Customize Outlook Message List option is no longer available in the Run JAWS Manager
dialog box (INSERT+F2). This is by design as this feature no longer applies to these types of Outlook 365 lists.
• JAWS 2022 includes updated scripts from Corel for WordPerfect 2021.
• For those who create JAWS scripts, added comments at the top of default.jss, so users know how to save a modified copy of this file to their user folder.
• In the Braille and Text Viewer, changed the default font size to 20. The previous font size of 40 was too large for most users. Additionally, it is now
possible to set the font size as low as 16 if needed.
• Added a new option to toggle the announcement of text marked as a suggestion in Google Docs. To change this, open Settings Center and locate the Suggested
text announcement check box.
• When navigating a table in Google Docs, JAWS now announces the current row or column after reading the cell contents. Additionally, if you have turned
off the announcement of table cell coordinates in Quick Settings, JAWS now only reads the cell contents as expected when using the table reading commands
(ALT+CTRL+ARROW Keys).
• Addressed an issue where JAWS was not indicating the start of commented text in Google Docs when navigating by word.
• Addressed an issue where JAWS was not reading as expected while navigating by line in Google Docs and you encountered a link spanning multiple lines.
• When moving to a new slide in PowerPoint, JAWS no longer says "no selection" prior to speaking the slide info, which was unnecessary speech. Now, JAWS
only announces the slide title and number.
• Addressed many reported issues with reading messages in Outlook 365.
• Addressed a reported issue in Outlook 365 where JAWS was not announcing autocomplete results when typing names into the address fields of a new message.
• Added the CTRL+U keystroke to Windows Keys help (INSERT+W) for Outlook. This command marks the current message as unread.
• If Show as Conversations is enabled in Outlook, addressed a reported issue where the current message or conversation was not displayed in braille while
navigating the list.
• Resolved an issue where JAWS was not announcing the Date picker button when creating a meeting request in Outlook.
• Added the ALT+Q command to the Windows Keys Help (INSERT+W) which opens the Quick Search feature in Microsoft Office apps.
• JAWS now properly reads the title of the current page in Chrome or Edge when using CTRL+TAB to move between open pages.
• Resolved an issue where pressing INSERT+SPACEBAR, X to launch the Flexible Web wizard was not working as expected in Edge Chromium.
• Resolved an issue where JAWS was not reading search results on the Windows 11 Start Screen.
• Resolved an issue reported by several international users where Settings Center and Quick Settings were displaying in English instead of the user's specific
language.
• Addressed a reported issue where Settings Center would become unresponsive if you typed a quotation mark in the Search edit box.
• When using INSERT+WINDOWS+F4 to manually close JAWS in situations where it has stopped working correctly, resolved an issue where JAWS was not automatically
restarting and creating the memory dump file that contains diagnostic information for Freedom Scientific.
• Added support for Azure Virtual Desktop.
list end
 
 
Stay safe & take care.  Mike.
Just once, I want a username and password prompt to say:  "Close Enough!"
 


Re: JAWS not speaking at all on starting system

Dave Durber
 

Turab:

After you turn on the computer and JAWS does not speak for about 30 to 50 seconds, press CTRL+WINDOWS KEY+ENTER, to turn on Narrator. If you use a password to log into Windows each time you turn on the computer or restart the computer, Narrator should speak the prompt for you to enter the password.

When you wake up a computerfrom either Sleep Mode or, Hibernation Mode, you are not prompted to enter a password.

Another thing I recommend any person who cannot visually read the screen should do, that is, turn on the "play Windows startup sound" function. By default, this is not turned on when Windows is installed.

How to turn on the "play Windows startup sound" function in Windows 10

1. When you are at the desktop, tap the WINDOWS Key, and type "change system sounds" (without the quotes, in the search edit field. Generally, as soon as you type the two letters ch, Windows usually delimits to this result. If it does, press ENTER, to open the utility.

2. When the utility opens, JAWS will speak some Windows information about system sound themes. If you do not wish to listen to the information, Tap the CTRL key, to stop JAWS speaking the infomation.

3, Tap the TAB key, until JAWS says, "play Windows startup sound". JAWS will tell you it is unchecked. This is the default setting.

4. Tap the SPACE BAR, to check the check box.

5. Tap the TAB key until you get to the Apply button, press the SPACE BAR, to apply the change

6. Tap the TAB key, until you get to the OK button, Press the SPACE BAR or, the ENTER key, to activate the OK button, to close the utility and return the system to the Desktop.

7. When you next turn on the computer, or, when you next restart Windows, the play Windows startup sound will be played.

8. If you are someone who needs to enter a password to log in to Windows, and you have not installed another screen reader or, you have, but it has not been set to start at the Log on screen, this is where you need to press CTRL+WINDOWS KEY+ENTER, to start Narrator. When Narrator starts speaking, Narrator should tell you , that you are at the point where you need to enter your password.

9. If you are someone who has disabled the default log on screen, when you hear the play Windows startup sound, Windows is at the Desktop. If you have not installed another screen reader or, you have, but it has not been set to start after Windows Log on, this is where you need to press CTRL+WINDOWS KEY+ENTER, to start Narrator and get access to Windows.

HTH

Dave

----- Original Message -----
From: "turab chimthanawala" <turabhvc@gmail.com>
To: "jfw" <jfw@groups.io>
Sent: Tuesday, October 26, 2021 7:02 AM
Subject: JAWS not speaking at all on starting system


Hi all,
I use Windows 10, JAWS 2021. Though I have chosen the option for JAWS
to start automatically, on some occasions, it does not speak at all.
This happens both on Starting as well as from Sleep mode. On checking
through sighted assistance, my microphone is not muted.
Only option left is to restarting and keep doing till I hear JAWS speak.


--
Regards,

Turab Chimthanawala
(ACS, LLM)
+91-8087813609
turabhvc@gmail.com




Re: JAWS not speaking at all on starting system

Dave Durber
 

Turab:

After you turn on the computer and JAWS does not speak for about 30 to 50 seconds, press CTRL+WINDOWS KEY+ENTER, to turn on Narrator. If you use a Windows password or, a Microsoft Account password, to log into Windows, Narrator should tell you that you are at to point where you need to enter either password.

Something I recommend any person who cannot visually read the screen should do, that is, turn on the "play Windows startup sound" function. By default, this is not turned on when Windows is installed.

How to turn on the "play Windows startup sound" function in Windows 10

1. When you are at the desktop, tap the WINDOWS Key, and type "change system sounds" (without the quotes, in the search edit field. Generally, as soon as you type the two letters ch, Windows usually delimits to this result. If it does, press ENTER, to open the utility.

2. When the utility opens, JAWS will speak some Windows information about system sound themes. If you do not wish to listen to the information, Tap the CTRL key, to stop JAWS speaking the infomation.

3, Tap the TAB key, until JAWS says, "play Windows startup sound". JAWS will tell you it is unchecked. This is the default setting.

4. Tap the SPACE BAR, to check the check box.

5. Tap the TAB key until you get to the Apply button, press the SPACE BAR, to apply the change

6. Tap the TAB key, until you get to the OK button, Press the SPACE BAR or, the ENTER key, to activate the OK button, to close the utility and return the system to the Desktop.

7. When you turn on the computer, restart Windows or, you wake the computer using either the Sleep mode or, Hibernation Mode, the play Windows startup sound will be played.

8. After you hear the Windows Startup sound, if you are someone who needs to enter a Windows password or, a Microsoft account password to log in to Windows, and you have not installed another screen reader or, you have, but it has not been set to start at the Log on screen, this is where you need to press CTRL+WINDOWS KEY+ENTER, to start Narrator. When Narrator starts speaking, Narrator should tell you , that you are at the point where you need to enter the Windows password or, the Microsoft account password to log into Windows.

9. If you are someone who has disabled the default log on screen, when you hear the play Windows startup sound, Windows is at the Desktop. If you have not installed another screen reader or, you have, but it has not been set to start after Windows Log on, this is where you need to press CTRL+WINDOWS KEY+ENTER, to start Narrator and get access to Windows.

HTH

Dave

----- Original Message -----
From: "turab chimthanawala" <turabhvc@gmail.com>
To: "jfw" <jfw@groups.io>
Sent: Tuesday, October 26, 2021 7:02 AM
Subject: JAWS not speaking at all on starting system


Hi all,
I use Windows 10, JAWS 2021. Though I have chosen the option for JAWS
to start automatically, on some occasions, it does not speak at all.
This happens both on Starting as well as from Sleep mode. On checking
through sighted assistance, my microphone is not muted.
Only option left is to restarting and keep doing till I hear JAWS speak.


--
Regards,

Turab Chimthanawala
(ACS, LLM)
+91-8087813609
turabhvc@gmail.com




How to change Facebook Password

Adrian Spratt
 

Hi. I’m unable to change my Facebook password. I can get to settings, but not beyond that. According to the instructions I got from Google, the next step is “security,” but it doesn’t show up. Any ideas? Here are those online instructions:

 

How to change your Facebook password

1. Click the down arrow in the top right.

2. Click 'Settings & Privacy' (those using Classic Facebook instead of New Facebook can skip this step)

3. Select 'Settings'

4. Click 'Security and Login'

5. Find 'Change password' and click 'Edit'

6. Enter your current password and your new password.

 


When can others hear my JAWS in a Microsoft Teams meeting

turab chimthanawala
 

Hi all,
While speaking in a Microsoft Teams meeting, despite not sharing
screen and also using a wired headphone, other participants can hear
my JAWS.
What's the reason and what are instances where JAWS can/ cannot be
heard by others?
Thanks

--
Regards,

Turab Chimthanawala
(ACS, LLM)
+91-8087813609
turabhvc@gmail.com


Re: email service issue

John Covici
 

You can set up a domain name quite easily by using one of the many
registrars. The one I like is www.nearlyfreespeech.net . Its quite
privacy oriented, does not cost very much to register a domain and the
message boards are quite nice. That does not create a website. There
are many places you can do that, such as wordpress.com which is
supposed to be pretty accessible.

On Tue, 26 Oct 2021 01:54:07 -0400,
David Ingram wrote:

How would i go about to setup a domain name?  I'm thinking about a website but who can create the website for me.
-----Original Message-----
From:
Sent: Oct 26, 2021 12:37 AM
To:
Subject: Re: email service issue
 
Why don't you set up a domain and use startmail, fastmail or any of a
number of providers? Its not free, but you get what you want and you
can change providers without changing your Email address.
 
On Mon, 25 Oct 2021 16:09:29 -0400,
Madison Martin wrote:

Okay, so how do I set up an Outlook.com account?

-----Original Message-----
From: main@jfw.groups.io On Behalf Of Van Lant, Robin via groups.io
Sent: October 25, 2021 3:01 PM
To: main@jfw.groups.io
Subject: Re: email service issue

Madison,
I have a free Outlook.com address for personal email It filters a tiny bit, but it generally seems pretty accurate at sending true spam to the junk filter. I only access my email through Outlook 2016 and via the native app on my iPhone, Sometimes a message will show in my inbox on the iphone, but when I open my inbox in Outlook on my laptop, the message will move to Junk; I think because I have marked that sender as Junk from within Outlook 2016. I thought most of these services had ways you can set your filtering level on the web; I don't seem to miss any message.



KeyCorp Public

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@key.com with 'No Promotional E-mails' in the SUBJECT line.











--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?
 
John Covici wb2una
covici@ccs.covici.com
 
 

 
 

 





--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


JAWS not speaking at all on starting system

turab chimthanawala
 

Hi all,
I use Windows 10, JAWS 2021. Though I have chosen the option for JAWS
to start automatically, on some occasions, it does not speak at all.
This happens both on Starting as well as from Sleep mode. On checking
through sighted assistance, my microphone is not muted.
Only option left is to restarting and keep doing till I hear JAWS speak.


--
Regards,

Turab Chimthanawala
(ACS, LLM)
+91-8087813609
turabhvc@gmail.com


Re: email service issue

David Ingram
 

How would i go about to setup a domain name?  I'm thinking about a website but who can create the website for me.

-----Original Message-----
From:
Sent: Oct 26, 2021 12:37 AM
To:
Subject: Re: email service issue
 
Why don't you set up a domain and use startmail, fastmail or any of a
number of providers? Its not free, but you get what you want and you
can change providers without changing your Email address.
 
On Mon, 25 Oct 2021 16:09:29 -0400,
Madison Martin wrote:

Okay, so how do I set up an Outlook.com account?

-----Original Message-----
From: main@jfw.groups.io On Behalf Of Van Lant, Robin via groups.io
Sent: October 25, 2021 3:01 PM
To: main@jfw.groups.io
Subject: Re: email service issue

Madison,
I have a free Outlook.com address for personal email It filters a tiny bit, but it generally seems pretty accurate at sending true spam to the junk filter. I only access my email through Outlook 2016 and via the native app on my iPhone, Sometimes a message will show in my inbox on the iphone, but when I open my inbox in Outlook on my laptop, the message will move to Junk; I think because I have marked that sender as Junk from within Outlook 2016. I thought most of these services had ways you can set your filtering level on the web; I don't seem to miss any message.



KeyCorp Public

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@key.com with 'No Promotional E-mails' in the SUBJECT line.











--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?
 
John Covici wb2una
covici@ccs.covici.com


Re: email service issue

John Covici
 

Why don't you set up a domain and use startmail, fastmail or any of a
number of providers? Its not free, but you get what you want and you
can change providers without changing your Email address.

On Mon, 25 Oct 2021 16:09:29 -0400,
Madison Martin wrote:

Okay, so how do I set up an Outlook.com account?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via groups.io
Sent: October 25, 2021 3:01 PM
To: main@jfw.groups.io
Subject: Re: email service issue

Madison,
I have a free Outlook.com address for personal email It filters a tiny bit, but it generally seems pretty accurate at sending true spam to the junk filter. I only access my email through Outlook 2016 and via the native app on my iPhone, Sometimes a message will show in my inbox on the iphone, but when I open my inbox in Outlook on my laptop, the message will move to Junk; I think because I have marked that sender as Junk from within Outlook 2016. I thought most of these services had ways you can set your filtering level on the web; I don't seem to miss any message.



KeyCorp Public

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@key.com with 'No Promotional E-mails' in the SUBJECT line.











--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


Re: Download time in Pontes 3.2

Bill White
 

I think YouTube has throttled speeds for downloading through Pontes Media Downloader to conserve time for those actually watching the videos. I think they don't want people to download the videos, because when they download, the ads are skipped, and the video uploaders don't make money for themselves or for YouTube.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn / Lenny
Sent: Monday, October 25, 2021 7:20 PM
To: main@jfw.groups.io
Subject: Re: Download time in Pontes 3.2

 

Hi Monica,

I don't think it's the version, my version is pasted below, you find it by doing alt H for help and into "about".

But I've seen my 2X version downloading slowly lately too...

graphic 372  About Pontes Media Downloader graphic 73  graphic 960  graphic 798
Pontes Media DownloaderVersion 2.1.6619.26545
Nelu Campeangraphic 439  Created By
This program uses the follo wing open sourwing open source components:
Youtube-dl.exe from http://rg3.github.io/youtube-dl/
FFmpeg.exe from http://ffmpeg.org/
Supported sites Close window

----- Original Message -----

From: Monica S

Sent: Monday, October 25, 2021 8:49 PM

Subject: Re: Download time in Pontes 3.2

 

Hi, is there a way that I could see what version I am currently using?

 

Thanks,

 

Monica

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim Rawls
Sent: Monday, October 25, 2021 8:05 PM
To: main@jfw.groups.io
Subject: Re: Download time in Pontes 3.2

 

Barbara, find the link to version 2.1. I’ll see if I can send you mine, but if it doesn’t work,. Go on line to find versiohn2.1. it is much better. Jim    

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Barbara Sheinbein
Sent: Monday, October 25, 2021 5:56 PM
To: JFW List <jfw@groups.io>
Subject: Download time in Pontes 3.2

 

Hi Everyone,

 

I am not sure what is going on, but my downloads in Pontes media 3.2 are taking a long time.  I have tried several different YouTube files.  I can otherwise download outside of this program in more typical times.  So what I want to be able to do is monitor the download time in Pontes.  A sighted person seemed to be able to view this.  How can I monitor the time with JAWS?

 

Thanks in advance for any help.

 

Barbara

 

 


Re: email service issue

Maria Reyes
 

I actually just switched to an Outlook.com address but still have my gmail in case I want to switch back. but Outlook on the phone has push so you don't have to keep refreshing.

On Oct 26, 2021, at 12:39 AM, Sieghard Weitzel <sieghard@live.ca> wrote:

https://www.lifewire.com/create-new-outlook-email-1170658

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: October 25, 2021 1:09 PM
To: main@jfw.groups.io
Subject: Re: email service issue

Okay, so how do I set up an Outlook.com account?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via groups.io
Sent: October 25, 2021 3:01 PM
To: main@jfw.groups.io
Subject: Re: email service issue

Madison,
I have a free Outlook.com address for personal email It filters a tiny bit, but it generally seems pretty accurate at sending true spam to the junk filter. I only access my email through Outlook 2016 and via the native app on my iPhone, Sometimes a message will show in my inbox on the iphone, but when I open my inbox in Outlook on my laptop, the message will move to Junk; I think because I have marked that sender as Junk from within Outlook 2016. I thought most of these services had ways you can set your filtering level on the web; I don't seem to miss any message.



KeyCorp Public

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@key.com with 'No Promotional E-mails' in the SUBJECT line.
















Re: email service issue

 

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: October 25, 2021 1:09 PM
To: main@jfw.groups.io
Subject: Re: email service issue

Okay, so how do I set up an Outlook.com account?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via groups.io
Sent: October 25, 2021 3:01 PM
To: main@jfw.groups.io
Subject: Re: email service issue

Madison,
I have a free Outlook.com address for personal email It filters a tiny bit, but it generally seems pretty accurate at sending true spam to the junk filter. I only access my email through Outlook 2016 and via the native app on my iPhone, Sometimes a message will show in my inbox on the iphone, but when I open my inbox in Outlook on my laptop, the message will move to Junk; I think because I have marked that sender as Junk from within Outlook 2016. I thought most of these services had ways you can set your filtering level on the web; I don't seem to miss any message.



KeyCorp Public

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@key.com with 'No Promotional E-mails' in the SUBJECT line.


Kodi Support with JAWS

Cornelius
 

 
Hey all, since the latest version of Kodi 19, there is no more Kodi Screen Reader add-on anymore. I am wonderring if there is any script that can allow using Kodi with JAWS?
 
Thanks.
 


Re: Inappropriate Forms Mode in latest JAWS 2021 Build

Mike B.
 


Hi Marty,
 
The question was about J2021, hence the steps I posted.  But, you bring up  a good point since many others that run J2019 will learn that setting isn't available in J2019, and they won't go looking for that setting now.
 
 
Stay safe & take care.  Mike.
Just once, I want a username and password prompt to say:  "Close Enough!"
 

----- Original Message -----
Sent: Monday, October 25, 2021 6:59 PM
Subject: Re: Inappropriate Forms Mode in latest JAWS 2021 Build

Thanks Mike,  I guess that this is not available in JAWS 2019.  I was hoping.

n 10/25/2021 2:14 PM, Mike B. wrote:

HI marty,
 
Open the Settings Center default all applications.
Down arrow to, User closed, and right arrow to open.
 
Down arrow to, Enable virtual cursor for Windows universal apps, and use the spacebar to check or uncheck.
 
Apply and Okay you're way out to save and close.
 
 
Stay safe & take care.  Mike.
Just once, I want a username and password prompt to say:  "Close Enough!"
 
----- Original Message -----
Sent: Monday, October 25, 2021 11:18 AM
Subject: Re: Inappropriate Forms Mode in latest JAWS 2021 Build

Can you tell me where you found that setting?  I hit JAWS Key + 6 and didn't find it there.

On 10/25/2021 12:34 PM, Dennis Brown wrote:

Hi Bill.

I found the cause of the forms mode activation!

In the Jaws configuration, I had checked the setting,

“Enable Virtual Cursor in Windows Universal Apps.”

When I disabled that, things went back to normal.

Thanks for the assistance!

Dennis




AVG logo

This email has been checked for viruses by AVG antivirus software.
www.avg.com


-- 
Thanks,
Lion Marty Hutchings
BOLD Secretary, Program Director and VIP Liaison
(262) 605-8981
mhutchings152730@...
www.wisconsinbold.com
-- 
Thanks,
Lion Marty Hutchings
BOLD Secretary, Program Director and VIP Liaison
(262) 605-8981
mhutchings152730@...
www.wisconsinbold.com


Re: Download time in Pontes 3.2

Glenn / Lenny
 

Hi Monica,
I don't think it's the version, my version is pasted below, you find it by doing alt H for help and into "about".
But I've seen my 2X version downloading slowly lately too...
graphic 372  About Pontes Media Downloader graphic 73  graphic 960  graphic 798
Pontes Media DownloaderVersion 2.1.6619.26545
Nelu Campeangraphic 439  Created By
This program uses the follo wing open sourwing open source components:
Youtube-dl.exe from http://rg3.github.io/youtube-dl/
FFmpeg.exe from http://ffmpeg.org/
Supported sites Close window

----- Original Message -----
From: Monica S
Sent: Monday, October 25, 2021 8:49 PM
Subject: Re: Download time in Pontes 3.2

Hi, is there a way that I could see what version I am currently using?

 

Thanks,

 

Monica

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim Rawls
Sent: Monday, October 25, 2021 8:05 PM
To: main@jfw.groups.io
Subject: Re: Download time in Pontes 3.2

 

Barbara, find the link to version 2.1. I’ll see if I can send you mine, but if it doesn’t work,. Go on line to find versiohn2.1. it is much better. Jim    

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Barbara Sheinbein
Sent: Monday, October 25, 2021 5:56 PM
To: JFW List <jfw@groups.io>
Subject: Download time in Pontes 3.2

 

Hi Everyone,

 

I am not sure what is going on, but my downloads in Pontes media 3.2 are taking a long time.  I have tried several different YouTube files.  I can otherwise download outside of this program in more typical times.  So what I want to be able to do is monitor the download time in Pontes.  A sighted person seemed to be able to view this.  How can I monitor the time with JAWS?

 

Thanks in advance for any help.

 

Barbara

 

 


Re: Inappropriate Forms Mode in latest JAWS 2021 Build

Marty Hutchings
 

Thanks Mike,  I guess that this is not available in JAWS 2019.  I was hoping.

n 10/25/2021 2:14 PM, Mike B. wrote:

HI marty,
 
Open the Settings Center default all applications.
Down arrow to, User closed, and right arrow to open.
 
Down arrow to, Enable virtual cursor for Windows universal apps, and use the spacebar to check or uncheck.
 
Apply and Okay you're way out to save and close.
 
 
Stay safe & take care.  Mike.
Just once, I want a username and password prompt to say:  "Close Enough!"
 
----- Original Message -----
Sent: Monday, October 25, 2021 11:18 AM
Subject: Re: Inappropriate Forms Mode in latest JAWS 2021 Build

Can you tell me where you found that setting?  I hit JAWS Key + 6 and didn't find it there.

On 10/25/2021 12:34 PM, Dennis Brown wrote:

Hi Bill.

I found the cause of the forms mode activation!

In the Jaws configuration, I had checked the setting,

“Enable Virtual Cursor in Windows Universal Apps.”

When I disabled that, things went back to normal.

Thanks for the assistance!

Dennis




AVG logo

This email has been checked for viruses by AVG antivirus software.
www.avg.com


-- 
Thanks,
Lion Marty Hutchings
BOLD Secretary, Program Director and VIP Liaison
(262) 605-8981
mhutchings152730@...
www.wisconsinbold.com
-- 
Thanks,
Lion Marty Hutchings
BOLD Secretary, Program Director and VIP Liaison
(262) 605-8981
mhutchings152730@...
www.wisconsinbold.com


Re: Inappropriate Forms Mode in latest JAWS 2021 Build

Marty Hutchings
 

You are going to yell at me, because I was looking for this feature in JAWS 2019 and apparently, it isn't there yet.  I used the search field and looked for "enable" and "virtual cursor"   

On 10/25/2021 1:54 PM, Bill White wrote:

Hi, Marty. I don't know why you didn't find it in JAWS key plus six. It actually is there. Look in the search box for the word enable, and it should be the first result. It might have to do with which application is loaded when you look for the word enable.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marty Hutchings
Sent: Monday, October 25, 2021 11:18 AM
To: main@jfw.groups.io
Subject: Re: Inappropriate Forms Mode in latest JAWS 2021 Build

 

Can you tell me where you found that setting?  I hit JAWS Key + 6 and didn't find it there.

On 10/25/2021 12:34 PM, Dennis Brown wrote:

Hi Bill.

I found the cause of the forms mode activation!

In the Jaws configuration, I had checked the setting,

“Enable Virtual Cursor in Windows Universal Apps.”

When I disabled that, things went back to normal.

 

Thanks for the assistance!

 

Dennis

 


AVG logo

This email has been checked for viruses by AVG antivirus software.
www.avg.com



-- 
Thanks,
Lion Marty Hutchings
BOLD Secretary, Program Director and VIP Liaison
(262) 605-8981
mhutchings152730@...
www.wisconsinbold.com
-- 
Thanks,
Lion Marty Hutchings
BOLD Secretary, Program Director and VIP Liaison
(262) 605-8981
mhutchings152730@...
www.wisconsinbold.com

81 - 100 of 93255