Date   

Re: Focus 40 Blue for JAWS

Richard Holloway
 

Your advice is sound.

However, my daughter is only 10 (now) and wasn't using her computer extensively at the time the SMA ran out. We started off with a PAC Mate with a display and a new computer with JAWS for her when she was four. Freedom got us with a couple of sma's and a couple of hma's (or whatever the hardware agreements are).

Soon after we bought all this (she was age 5) , our daughter started working with Braille 'n Speak. Then moved to an mPower at 6, and on to an Apex BrailleNote at age 7, so decided to hold off until she was ready to start really using the FS items more before that became a place to spend even more money. Besides, we needed to buy various iDevices for her as well along the way. And other little items like Victor Readers and such. There is always somewhere to spend more money on technology.

Actually, we realize now that we actually could have used the JAWS license with her PAC mate and had working JAWS 12, 13, and 14, before we upgraded, but I don't think it has caused her a major setback. It actually would have been nice if they had told us the PAC Mate included the JAWS feature up front. That extra $900 was hard to part with then, and I'd have saved the original SMA money plus the upgrade money if I had only bought now-- something like $600, and be in the exact same place now.

We've been using her Apex extremely heavily for several years now. It is where most everything is done for her schoolwork and personal notes and a good deal of her online needs are handled between the Apex and her iDevices.

That said, were heading into 5th grade and we need to get more up to speed with our jAWS as well as all the rest, so it was time, and the hassle of using the PacMate as a huge JAWS "DONGLE" was just too much of a hassle not to move forward with a regular license. I may need to get her a laptop pretty soon anyhow, so we'll be all set for that when the time comes. The only problem is she's gonna need a wagon or small golf cart to haul all her technology around with her pretty soon, LOL.

Good advice though-- I appreciate it!

Sent from my iPhone

On Jul 15, 2013, at 9:57 PM, "Lee Maschmeyer" <leemer1@comcast.net> wrote:

For what it's worth (every penny you pay for this advice <grin>) screenreaders are far too much in flux to skimp on updates. If you have the money it is close to imperative, imho, to purchase every single update. And, when you do an automatic upgrade, destroy your personal settings for that version and use Settings Center to recreate them from scratch. Personal settings are, for example, the ones in:

c:\users\lmaschm\appdata\roaming\freedom scientific\jaws\

This is the path on Windows 7. Other versions have slight variations. And of course replace lmaschm with your (or your daughter's) ID.

Just shooting off my mouth but it really is a good idea to buy new versions so you're lucky you did so,

--

Lee Maschmeyer

"Never imagine yourself not to be otherwise than what it might appear to others that what you were or might have been was not otherwise than what you had been would have appeared to them to be otherwise."
--Lewis Carroll

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: JAWS saying "Block Quote,"

Mike B. <mb69mach1@...>
 

Hi Rick,

Try the following:
1. Open the Setting Center & open the Settings Center default all
applications.
2. Arrow down to, Web / HTML / PDFs & press right arrow to open.
3. Arrow down to, Reading, & right arrow to open.
4. Arrow down to, Indicate Block Quotations, & uncheck this box with the
spacebar, press enter to save your changes & close the Settings Center.
HTH
Take care.
Mike
This email was sent from my, iBarstool.

----- Original Message -----
From: Rick Miller
To: Jfw@lists.the-jdh.com
Sent: Monday, July 15, 2013 8:08 PM
Subject: JAWS saying "Block Quote,"


Dear Listers:



Sometimes when I try to read certain messages that come to me, sometimes
instead of reading the messages all JAWS will say is, "Block quote. Block
quote. Block quote," continuously. I have been told that the cause of this
could be one of two things--either an HTML setting or a setting with the
sender's e-mail program. A lot of times when I have gotten these messages,
it has been when people have been sending messages from their i-phone. Have
any of you ever experienced this problem, and how did you go about resolving
it, and can you give me some advice as to how I can rectify it?



Rick Miller



-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20130715/2784d31a/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20130715/ff6fc116/attachment.html>


JAWS saying "Block Quote,"

Rick Miller
 

Dear Listers:



Sometimes when I try to read certain messages that come to me, sometimes
instead of reading the messages all JAWS will say is, "Block quote. Block
quote. Block quote," continuously. I have been told that the cause of this
could be one of two things--either an HTML setting or a setting with the
sender's e-mail program. A lot of times when I have gotten these messages,
it has been when people have been sending messages from their i-phone. Have
any of you ever experienced this problem, and how did you go about resolving
it, and can you give me some advice as to how I can rectify it?



Rick Miller



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20130715/2784d31a/attachment.html>


Re: Focus 40 Blue for JAWS

Lee Maschmeyer
 

For what it's worth (every penny you pay for this advice <grin>) screenreaders are far too much in flux to skimp on updates. If you have the money it is close to imperative, imho, to purchase every single update. And, when you do an automatic upgrade, destroy your personal settings for that version and use Settings Center to recreate them from scratch. Personal settings are, for example, the ones in:

c:\users\lmaschm\appdata\roaming\freedom scientific\jaws\

This is the path on Windows 7. Other versions have slight variations. And of course replace lmaschm with your (or your daughter's) ID.

Just shooting off my mouth but it really is a good idea to buy new versions so you're lucky you did so,

--

Lee Maschmeyer

"Never imagine yourself not to be otherwise than what it might appear to others that what you were or might have been was not otherwise than what you had been would have appeared to them to be otherwise."
--Lewis Carroll


Re: Focus 40 Blue for JAWS

Richard Holloway
 

Interestingly, while I had been told I needed to upgrade to JAWS12 or newer for BT operation, I just read in the manual that for "JAWS 12 or earlier" you have to find the outgoing port number assigned to the Focus display. (Under Bluetooth setup.)

I guess it is good to be current, but I bought the JAWS upgrade so my daughter could use her computer from across the room. So far she still can't and it looks like this should have worked without the upgrade for the past two years. I also bought this new Rocketfish BT adapter just in case the old one was part of the problem-- apparently another bad guess.

To be completely clear, this manual is for the new Focus 40 Blue and I was trying to configure a "classic model", but BT isn't seeing either the new or classic models turned on and in the same room.

Sent from my iPhone

On Jul 15, 2013, at 11:58 AM, Richard Holloway <rholloway@gopbc.org> wrote:

Okay, I'm back in Focus 40 question mode, but now the confusion is tied straight to a JAWS machine.

We have a 32 bit HP desktop unit running Vista. We have a Focus 40 Blue (Classic model) that has been plugged to the machine for a couple of years via USB. We couldn't use Bluetooth because we were still running JAWS 11.

I've upgraded to JAWS 14 and added a Rocketfish Bluetooth USB adapter. I have run the appropriate installer for the adapter and it looks like Bluetooth is running, but I can't see anything to pair.

The 40 Blue is charged fully and operating properly-- definite turned on too...

A day or so ago, I was pairing a new generation Focus 40 Blue to an iDevice and found I had to pair through VoiceOver, not in the regular Bluetooth area, so I thought that might be similar with JAWS.

Well, I can switch Braille to Bluetooth and see the adapter appears to be there and it wasn't before I added the USB adapter, but with one or two different Focus 40's running in the room, and the classic has never been paired to anything, I don't see a display to select through JAWS.

It can't be all that hard to pair this thing, can it? What simple step am I missing?

Sent from my iPhone
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Focus 40 Blue for JAWS

Richard Holloway
 

Okay, I'm back in Focus 40 question mode, but now the confusion is tied straight to a JAWS machine.

We have a 32 bit HP desktop unit running Vista. We have a Focus 40 Blue (Classic model) that has been plugged to the machine for a couple of years via USB. We couldn't use Bluetooth because we were still running JAWS 11.

I've upgraded to JAWS 14 and added a Rocketfish Bluetooth USB adapter. I have run the appropriate installer for the adapter and it looks like Bluetooth is running, but I can't see anything to pair.

The 40 Blue is charged fully and operating properly-- definite turned on too...

A day or so ago, I was pairing a new generation Focus 40 Blue to an iDevice and found I had to pair through VoiceOver, not in the regular Bluetooth area, so I thought that might be similar with JAWS.

Well, I can switch Braille to Bluetooth and see the adapter appears to be there and it wasn't before I added the USB adapter, but with one or two different Focus 40's running in the room, and the classic has never been paired to anything, I don't see a display to select through JAWS.

It can't be all that hard to pair this thing, can it? What simple step am I missing?

Sent from my iPhone


Re: Jaws 14 copy and paste from websites

Mike B. <mb69mach1@...>
 

Hi Jim,

In your IE quick settings, insert + J, under the Virtual Cursor Options, do
you have it set on, select & copy from virtual cursor? If not, press the
spacebar to toggle this option, tab to okay, & press enter.

HTH
Take care.
Mike
This email was sent from my, iGasSucking460Powered1969Mach1!

----- Original Message -----
From: Jim L
To: 'The Jaws for Windows support list.'
Sent: Sunday, July 14, 2013 6:09 PM
Subject: Jaws 14 copy and paste from websites


Heya folks,

Am having an issue with Jaws 14 when copying and pasting text from websites
to Microsoft Word where it shows letters by letters e.g
J
A
W
S

C
O
P
Y
I
N
G

A
N
D

p
A
S
T
E

Instead all in one line Jaws copying and paste

Can anyone help me what setting I need to change?

Regards,

Jim


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20130715/b03ce3ef/attachment.html>


Jaws 14 copy and paste from websites

Jim L
 

Heya folks,

Am having an issue with Jaws 14 when copying and pasting text from websites
to Microsoft Word where it shows letters by letters e.g
J
A
W
S

C
O
P
Y
I
N
G

A
N
D

p
A
S
T
E

Instead all in one line Jaws copying and paste

Can anyone help me what setting I need to change?

Regards,

Jim


Re: unknown function call to getlanguagecodeatcursor

MJ Williams <matthewjwilliams101@...>
 

I reinstalled the whole thing from the scratch and chose not to update to the latest patch.
All's well once again. :)
Thanks very much for all your help folks.
Sincerely,
Matt

At 00:03 15/07/2013, you wrote:
Hello.
If memory serves when I needed to do a repair, I went to the Help menu, alt H, then web resources, then technical Support, and typed Jaws Repair in the search edit box, I then got a list of technical support bulletins, and here was the trick, when I clicked on repair it did not take me there, but started the process. It was a while ago, so I may have missed something.
Cheers Kevin H.

-----Original Message----- From: MJ Williams
Sent: Saturday, July 13, 2013 11:00 PM
To: Jfw@lists.the-jdh.com
Subject: unknown function call to getlanguagecodeatcursor

Dear all,
When in table mode, pressing any key assigned to a navigation
function returns the message
unknown function call to getlanguagecodeatcursor
before the cell content is read out.
Any idea what may be causing this?
Sincerely, Matt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: unknown function call to getlanguagecodeatcursor

Kevin Hourigan <kevinthourigan@...>
 

Hello.
If memory serves when I needed to do a repair, I went to the Help menu, alt H, then web resources, then technical Support, and typed Jaws Repair in the search edit box, I then got a list of technical support bulletins, and here was the trick, when I clicked on repair it did not take me there, but started the process. It was a while ago, so I may have missed something.
Cheers Kevin H.

-----Original Message-----
From: MJ Williams
Sent: Saturday, July 13, 2013 11:00 PM
To: Jfw@lists.the-jdh.com
Subject: unknown function call to getlanguagecodeatcursor

Dear all,
When in table mode, pressing any key assigned to a navigation
function returns the message
unknown function call to getlanguagecodeatcursor
before the cell content is read out.
Any idea what may be causing this?
Sincerely, Matt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: unknown function call to getlanguagecodeatcursor

Adrian Spratt
 

Yes, this is good information. It requires that the executable file be saved to the system.

My previous message followed on an earlier suggestion that a repair can be done via "add and remove." As far as I can tell, this particular method doesn't work. I was hoping to be proven wrong, but so far it doesn't seem that I am.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Ann Byrne
Sent: Sunday, July 14, 2013 2:31 PM
To: The Jaws for Windows support list.
Subject: RE: unknown function call to getlanguagecodeatcursor

I am running JAWS 14.0.3005. when I run the j14.0.3005.64bitt.exe
file, I choose install. after it looks like JAWS is going to
re-install itself, I finally get to a dialog where I can choose to
modify, repair, oror remove the installation.
At 11:34 AM 7/14/2013, you wrote:
Not in add or remove. The only option is "uninstall." When you enter
on that, the only choice you get is between removing or not removing
shared components. Or am I missing something? What you describe,
silly as it sounds, would still make the job simpler.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Ann Byrne
Sent: Sunday, July 14, 2013 11:01 AM
To: The Jaws for Windows support list.
Subject: RE: unknown function call to getlanguagecodeatcursor

If you choose install on the version you have, JAWS will tell you
that it is already installed and asked if you want to repair. Silly
way to do things, but there you have it.
At 10:01 AM 7/14/2013, you wrote:
Note that the DVD might have an earlier version than what you have
installed. If you've downloaded and installed from the executable
file, that would be the one to work with. If you've updated via the
JAWS update feature, you might want to go to the FS website and
locate that version and download it.

I just tried finding the repair option in "Add or remove," but JAWS
has only an uninstall option in the applications menu. Other
applications have more options. I don't know why FS made JAWS repair
so difficult to get to.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Bill White
Sent: Sunday, July 14, 2013 9:55 AM
To: The Jaws for Windows support list.
Subject: Re: unknown function call to getlanguagecodeatcursor

You must use the DVD or the executable installer to find the repair option
for JAWS.
Bill White billwhite92701@dslextreme.com
----- Original Message -----
From: "MJ Williams" <matthewjwilliams101@gmail.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Sunday, July 14, 2013 12:22 AM
Subject: Re: unknown function call to getlanguagecodeatcursor


Thanks for the response. I'm afraid I can't find the repair option
anywhere.
Is there a way of resetting all scripts to the factory default?
Thanks, MattAt 07:40 14/07/2013, you wrote:
I would suspect that you had custom scripts installed before a jaws
upgrade, possibily something you ended up not even using but left
installed simply because it was easier than removing it.

Then you did a jaws update and the script broke.

If I am right doing a jaws repair should take care of it.

Go to "Add or Remove Programs" type "free" to get close and then find
the version of jaws you are running. Select repair from the context
menu.

On 7/13/13, MJ Williams <matthewjwilliams101@gmail.com> wrote:
Dear all,
When in table mode, pressing any key assigned to a navigation
function returns the message
unknown function call to getlanguagecodeatcursor
before the cell content is read out.
Any idea what may be causing this?
Sincerely, Matt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
Soronel Haetir
soronel.haetir@gmail.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


__________ Information from ESET NOD32 Antivirus, version of virus
signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus
signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com




_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: unknown function call to getlanguagecodeatcursor

Ann Byrne
 

I am running JAWS 14.0.3005. when I run the j14.0.3005.64bitt.exe file, I choose install. after it looks like JAWS is going to re-install itself, I finally get to a dialog where I can choose to modify, repair, oror remove the installation.

At 11:34 AM 7/14/2013, you wrote:
Not in add or remove. The only option is "uninstall." When you enter on that, the only choice you get is between removing or not removing shared components. Or am I missing something? What you describe, silly as it sounds, would still make the job simpler.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Ann Byrne
Sent: Sunday, July 14, 2013 11:01 AM
To: The Jaws for Windows support list.
Subject: RE: unknown function call to getlanguagecodeatcursor

If you choose install on the version you have, JAWS will tell you
that it is already installed and asked if you want to repair. Silly
way to do things, but there you have it.
At 10:01 AM 7/14/2013, you wrote:
Note that the DVD might have an earlier version than what you have
installed. If you've downloaded and installed from the executable
file, that would be the one to work with. If you've updated via the
JAWS update feature, you might want to go to the FS website and
locate that version and download it.

I just tried finding the repair option in "Add or remove," but JAWS
has only an uninstall option in the applications menu. Other
applications have more options. I don't know why FS made JAWS repair
so difficult to get to.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Bill White
Sent: Sunday, July 14, 2013 9:55 AM
To: The Jaws for Windows support list.
Subject: Re: unknown function call to getlanguagecodeatcursor

You must use the DVD or the executable installer to find the repair option
for JAWS.
Bill White billwhite92701@dslextreme.com
----- Original Message -----
From: "MJ Williams" <matthewjwilliams101@gmail.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Sunday, July 14, 2013 12:22 AM
Subject: Re: unknown function call to getlanguagecodeatcursor


Thanks for the response. I'm afraid I can't find the repair option
anywhere.
Is there a way of resetting all scripts to the factory default?
Thanks, MattAt 07:40 14/07/2013, you wrote:
I would suspect that you had custom scripts installed before a jaws
upgrade, possibily something you ended up not even using but left
installed simply because it was easier than removing it.

Then you did a jaws update and the script broke.

If I am right doing a jaws repair should take care of it.

Go to "Add or Remove Programs" type "free" to get close and then find
the version of jaws you are running. Select repair from the context
menu.

On 7/13/13, MJ Williams <matthewjwilliams101@gmail.com> wrote:
Dear all,
When in table mode, pressing any key assigned to a navigation
function returns the message
unknown function call to getlanguagecodeatcursor
before the cell content is read out.
Any idea what may be causing this?
Sincerely, Matt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
Soronel Haetir
soronel.haetir@gmail.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


__________ Information from ESET NOD32 Antivirus, version of virus
signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus
signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com




_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Using Express Scribe with JAWS

dan Kerstetter <dhk55@...>
 

The problem is quite the opposite. I don't need to boost the dictation, I
need to boost the volume of JAWS. I use an audigy CS2 for sound. I've
enabled the onboard sound . If I can get JAWS assigned to the onboard sound
and fine a long cord to use with a set of ear buds along with regular
headphones, I'll be fine until I get Windows 7.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Jean
Sent: Sunday, July 14, 2013 12:29 PM
To: The Jaws for Windows support list.
Subject: Re: Using Express Scribe with JAWS

Dan

One other thing to try that I forgot. If the audio of the file is too low,
go to the File Menu and arrow up to Special Audio Processes. Press enter on
Extra Audio Boost. Let it run whatever it does to the file. You may want to
do it several times depending on the original recording levels. This will
bring the audio of the file up, and then Jaws won't blast your ears off.

Jean


-----Original Message-----
From: dan Kerstetter
Sent: Saturday, July 13, 2013 11:17 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Using Express Scribe with JAWS

I had completely forgotten about that. Thanks for the clue.

Dan


-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Gary King
Sent: Friday, July 12, 2013 9:50 PM
To: The Jaws for Windows support list.
Subject: Re: Using Express Scribe with JAWS

I suspect the separate volume adjustment would work better under Windows 7
and probably 8. In another message, you mentioned that you are using
Windows XP. Separate volume adjustment is not usually possible with XP
unless the program supports some special type of Direct Sound output such as
in Winamp.

Gary King
w4wkz@bellsouth.net
----- Original Message -----
From: "dan Kerstetter" <dhk55@comcast.net>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Friday, July 12, 2013 4:43 PM
Subject: Using Express Scribe with JAWS


I'm trying to use Express Scribe, which is transcription software,
with JAWS. The volume controls in Express Scribe will not operate
separately from my speech output.



Short of buying another sound card, reassigning JAWS to it and trying
to have dictation going in one ear and computer speech into my other
ear, is there a way to separate the JAWS volume from the dictation volume?



Dan



-------------- next part -------------- An HTML attachment was
scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201307
12/61995779/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: unknown function call to getlanguagecodeatcursor

Adrian Spratt
 

Not in add or remove. The only option is "uninstall." When you enter on that, the only choice you get is between removing or not removing shared components. Or am I missing something? What you describe, silly as it sounds, would still make the job simpler.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Ann Byrne
Sent: Sunday, July 14, 2013 11:01 AM
To: The Jaws for Windows support list.
Subject: RE: unknown function call to getlanguagecodeatcursor

If you choose install on the version you have, JAWS will tell you
that it is already installed and asked if you want to repair. Silly
way to do things, but there you have it.
At 10:01 AM 7/14/2013, you wrote:
Note that the DVD might have an earlier version than what you have
installed. If you've downloaded and installed from the executable
file, that would be the one to work with. If you've updated via the
JAWS update feature, you might want to go to the FS website and
locate that version and download it.

I just tried finding the repair option in "Add or remove," but JAWS
has only an uninstall option in the applications menu. Other
applications have more options. I don't know why FS made JAWS repair
so difficult to get to.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Bill White
Sent: Sunday, July 14, 2013 9:55 AM
To: The Jaws for Windows support list.
Subject: Re: unknown function call to getlanguagecodeatcursor

You must use the DVD or the executable installer to find the repair option
for JAWS.
Bill White billwhite92701@dslextreme.com
----- Original Message -----
From: "MJ Williams" <matthewjwilliams101@gmail.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Sunday, July 14, 2013 12:22 AM
Subject: Re: unknown function call to getlanguagecodeatcursor


Thanks for the response. I'm afraid I can't find the repair option
anywhere.
Is there a way of resetting all scripts to the factory default?
Thanks, MattAt 07:40 14/07/2013, you wrote:
I would suspect that you had custom scripts installed before a jaws
upgrade, possibily something you ended up not even using but left
installed simply because it was easier than removing it.

Then you did a jaws update and the script broke.

If I am right doing a jaws repair should take care of it.

Go to "Add or Remove Programs" type "free" to get close and then find
the version of jaws you are running. Select repair from the context
menu.

On 7/13/13, MJ Williams <matthewjwilliams101@gmail.com> wrote:
Dear all,
When in table mode, pressing any key assigned to a navigation
function returns the message
unknown function call to getlanguagecodeatcursor
before the cell content is read out.
Any idea what may be causing this?
Sincerely, Matt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
Soronel Haetir
soronel.haetir@gmail.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


__________ Information from ESET NOD32 Antivirus, version of virus
signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus
signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com




_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Using Express Scribe with JAWS

Jean <jemenzies@...>
 

Dan

One other thing to try that I forgot. If the audio of the file is too low, go to the File Menu and arrow up to Special Audio Processes. Press enter on Extra Audio Boost. Let it run whatever it does to the file. You may want to do it several times depending on the original recording levels. This will bring the audio of the file up, and then Jaws won't blast your ears off.

Jean

-----Original Message-----
From: dan Kerstetter
Sent: Saturday, July 13, 2013 11:17 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Using Express Scribe with JAWS

I had completely forgotten about that. Thanks for the clue.

Dan


-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Gary King
Sent: Friday, July 12, 2013 9:50 PM
To: The Jaws for Windows support list.
Subject: Re: Using Express Scribe with JAWS

I suspect the separate volume adjustment would work better under Windows 7
and probably 8. In another message, you mentioned that you are using
Windows XP. Separate volume adjustment is not usually possible with XP
unless the program supports some special type of Direct Sound output such as
in Winamp.

Gary King
w4wkz@bellsouth.net
----- Original Message -----
From: "dan Kerstetter" <dhk55@comcast.net>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Friday, July 12, 2013 4:43 PM
Subject: Using Express Scribe with JAWS


I'm trying to use Express Scribe, which is transcription software, with
JAWS. The volume controls in Express Scribe will not operate separately
from my speech output.



Short of buying another sound card, reassigning JAWS to it and trying to
have dictation going in one ear and computer speech into my other ear, is
there a way to separate the JAWS volume from the dictation volume?



Dan



-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201307
12/61995779/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: unknown function call to getlanguagecodeatcursor

Adrian Spratt
 

Note that the DVD might have an earlier version than what you have installed. If you've downloaded and installed from the executable file, that would be the one to work with. If you've updated via the JAWS update feature, you might want to go to the FS website and locate that version and download it.

I just tried finding the repair option in "Add or remove," but JAWS has only an uninstall option in the applications menu. Other applications have more options. I don't know why FS made JAWS repair so difficult to get to.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Bill White
Sent: Sunday, July 14, 2013 9:55 AM
To: The Jaws for Windows support list.
Subject: Re: unknown function call to getlanguagecodeatcursor

You must use the DVD or the executable installer to find the repair option
for JAWS.
Bill White billwhite92701@dslextreme.com
----- Original Message -----
From: "MJ Williams" <matthewjwilliams101@gmail.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Sunday, July 14, 2013 12:22 AM
Subject: Re: unknown function call to getlanguagecodeatcursor


Thanks for the response. I'm afraid I can't find the repair option
anywhere.
Is there a way of resetting all scripts to the factory default?
Thanks, MattAt 07:40 14/07/2013, you wrote:
I would suspect that you had custom scripts installed before a jaws
upgrade, possibily something you ended up not even using but left
installed simply because it was easier than removing it.

Then you did a jaws update and the script broke.

If I am right doing a jaws repair should take care of it.

Go to "Add or Remove Programs" type "free" to get close and then find
the version of jaws you are running. Select repair from the context
menu.

On 7/13/13, MJ Williams <matthewjwilliams101@gmail.com> wrote:
Dear all,
When in table mode, pressing any key assigned to a navigation
function returns the message
unknown function call to getlanguagecodeatcursor
before the cell content is read out.
Any idea what may be causing this?
Sincerely, Matt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
Soronel Haetir
soronel.haetir@gmail.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


__________ Information from ESET NOD32 Antivirus, version of virus
signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com




_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: unknown function call to getlanguagecodeatcursor

Ann Byrne
 

If you choose install on the version you have, JAWS will tell you that it is already installed and asked if you want to repair. Silly way to do things, but there you have it.

At 10:01 AM 7/14/2013, you wrote:
Note that the DVD might have an earlier version than what you have installed. If you've downloaded and installed from the executable file, that would be the one to work with. If you've updated via the JAWS update feature, you might want to go to the FS website and locate that version and download it.

I just tried finding the repair option in "Add or remove," but JAWS has only an uninstall option in the applications menu. Other applications have more options. I don't know why FS made JAWS repair so difficult to get to.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Bill White
Sent: Sunday, July 14, 2013 9:55 AM
To: The Jaws for Windows support list.
Subject: Re: unknown function call to getlanguagecodeatcursor

You must use the DVD or the executable installer to find the repair option
for JAWS.
Bill White billwhite92701@dslextreme.com
----- Original Message -----
From: "MJ Williams" <matthewjwilliams101@gmail.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Sunday, July 14, 2013 12:22 AM
Subject: Re: unknown function call to getlanguagecodeatcursor


Thanks for the response. I'm afraid I can't find the repair option
anywhere.
Is there a way of resetting all scripts to the factory default?
Thanks, MattAt 07:40 14/07/2013, you wrote:
I would suspect that you had custom scripts installed before a jaws
upgrade, possibily something you ended up not even using but left
installed simply because it was easier than removing it.

Then you did a jaws update and the script broke.

If I am right doing a jaws repair should take care of it.

Go to "Add or Remove Programs" type "free" to get close and then find
the version of jaws you are running. Select repair from the context
menu.

On 7/13/13, MJ Williams <matthewjwilliams101@gmail.com> wrote:
Dear all,
When in table mode, pressing any key assigned to a navigation
function returns the message
unknown function call to getlanguagecodeatcursor
before the cell content is read out.
Any idea what may be causing this?
Sincerely, Matt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
Soronel Haetir
soronel.haetir@gmail.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


__________ Information from ESET NOD32 Antivirus, version of virus
signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com




_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: unknown function call to getlanguagecodeatcursor

Bill White <billwhite92701@...>
 

You must use the DVD or the executable installer to find the repair option for JAWS.
Bill White billwhite92701@dslextreme.com

----- Original Message -----
From: "MJ Williams" <matthewjwilliams101@gmail.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Sunday, July 14, 2013 12:22 AM
Subject: Re: unknown function call to getlanguagecodeatcursor


Thanks for the response. I'm afraid I can't find the repair option anywhere.
Is there a way of resetting all scripts to the factory default?
Thanks, MattAt 07:40 14/07/2013, you wrote:
I would suspect that you had custom scripts installed before a jaws
upgrade, possibily something you ended up not even using but left
installed simply because it was easier than removing it.

Then you did a jaws update and the script broke.

If I am right doing a jaws repair should take care of it.

Go to "Add or Remove Programs" type "free" to get close and then find
the version of jaws you are running. Select repair from the context
menu.

On 7/13/13, MJ Williams <matthewjwilliams101@gmail.com> wrote:
Dear all,
When in table mode, pressing any key assigned to a navigation
function returns the message
unknown function call to getlanguagecodeatcursor
before the cell content is read out.
Any idea what may be causing this?
Sincerely, Matt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
Soronel Haetir
soronel.haetir@gmail.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


__________ Information from ESET NOD32 Antivirus, version of virus signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus signature database 8565 (20130714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com


Re: unknown function call to getlanguagecodeatcursor

MJ Williams <matthewjwilliams101@...>
 

Thanks for the response. I'm afraid I can't find the repair option anywhere.
Is there a way of resetting all scripts to the factory default?
Thanks, MattAt 07:40 14/07/2013, you wrote:

I would suspect that you had custom scripts installed before a jaws
upgrade, possibily something you ended up not even using but left
installed simply because it was easier than removing it.

Then you did a jaws update and the script broke.

If I am right doing a jaws repair should take care of it.

Go to "Add or Remove Programs" type "free" to get close and then find
the version of jaws you are running. Select repair from the context
menu.

On 7/13/13, MJ Williams <matthewjwilliams101@gmail.com> wrote:
Dear all,
When in table mode, pressing any key assigned to a navigation
function returns the message
unknown function call to getlanguagecodeatcursor
before the cell content is read out.
Any idea what may be causing this?
Sincerely, Matt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
Soronel Haetir
soronel.haetir@gmail.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: unknown function call to getlanguagecodeatcursor

Soronel Haetir
 

I would suspect that you had custom scripts installed before a jaws
upgrade, possibily something you ended up not even using but left
installed simply because it was easier than removing it.

Then you did a jaws update and the script broke.

If I am right doing a jaws repair should take care of it.

Go to "Add or Remove Programs" type "free" to get close and then find
the version of jaws you are running. Select repair from the context
menu.

On 7/13/13, MJ Williams <matthewjwilliams101@gmail.com> wrote:
Dear all,
When in table mode, pressing any key assigned to a navigation
function returns the message
unknown function call to getlanguagecodeatcursor
before the cell content is read out.
Any idea what may be causing this?
Sincerely, Matt


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
--
Soronel Haetir
soronel.haetir@gmail.com