Date   

difference between Jaws and Jaws non tandem builds?

Lauren Snyder
 

                               

 

Sincerely,

                                               

Lauren

 


Re: Windows 10 question

Lauren Snyder
 

Thank you. I am going to attempt and follow your steps. I may be emailing you from my IPhone.

 

 

Sincerely,

 

Lauren

 

From: David Moore [mailto:jesusloves1966@...]
Sent: Monday, November 30, 2015 5:58 PM
To: jfw@groups.io
Subject: Re: Windows 10 question

 

Hi,

I sure did, Thank you so much for correcting my mistake. Lauren, that is what the versions are. I need some more coffee. Take care.

 

 

From: empacc.net

Sent: Monday, November 30, 2015 4:23 PM

Subject: Re: Windows 10 question

 

hi david:

you actually got your jaws versions transposed.

the jaws version 16 should be either:

jaws 16.0.4350, or:

jaws 16.0.4463, or:

the latest version of jaws 17 which is:

jaws17.0.1214.

just clarifying, is all.

don't want anyone to be confused.

take care.

 

 

 

Sent: Monday, November 30, 2015 3:54 PM

Subject: Re: Windows 10 question

 

Hi Lauren,

You can upgrade without sighted help. You should install JAWS 17 first. Then, download the Tool from FS that will allow you to get rid of all previous JAWS versions from your computer along with shared components. The only version you should have on your computer is Version 17. If you want, You could also have version 16.0.1214. That will also work on Windows 10. Also, you will want to download the media creation tool from the MS page and save it to your computer. Make sure that you don’t run the media creation tool until you run that FS tool to get rid all versions of JAWS off your computer except 16.0.1214 and JAWS 17. Now, you can run the media creation tool to install win 10. Just press enter on the tool and press enter on upgrade this pc. JAWS will still be working. Once you get through some screens, JAWS will go quiet and this is when you wait an hour or more to let win10 download to your computer. It is around 3 gigs. After an hour, just turn on Narrator by pressing windows key + enter. You will be able to finish the install with Narrator. Now, since you have Windows 8, it should install fine after the first time. It is upgrading from Windows 7 that causes the trouble and it takes a few times. I upgraded from Windows 8.1, and it took me one time of running the media creation tool, and win10 installed great the first time. This is really important. When win10 installs and JAWS comes back talking, it is good to uninstall JAWS and reinstall JAWS. If you do this, even upgrading from win 8 or 8.1, you will get much better results from JAWS from then on out. Please email me if you have any questions. It is easy, and once win10 is on your computer, I can really help you get everything adjusted so you have the best experience using win10. You will love it and never want to go back. I will be thinking about you as you upgrade. Email me as soon as you have any questions. Take care, David Moore.

 

 

Sent: Monday, November 30, 2015 3:37 PM

Subject: Windows 10 question

 

Hi:

 

Now I have Win8, Jaws 14. Can I upgrade to Jaws 17 and then install Windows 10 myself or do I need sighted help? Is it ok to install Jaws first?

 

 

 

Sincerely,

 

Lauren

 

Howard Wolcott


Re: How to create a message rule in Outlook 2010 for the new list

Greg Nickel
 

Adrian

 

I’ve followed your instructions but when I go to create a rule it only gives me the option of sending the email address where I opened the rule to a folder and not a catch all of JFW as you suggested.  What am I doing wrong?

 

From: Adrian Spratt [mailto:Adrian@...]
Sent: Monday, November 30, 2015 11:59 AM
To: jfw@groups.io
Subject: Re: How to create a message rule in Outlook 2010 for the new list

 

After sending the message below, I realize it’s way too dense. Also, it’s missing a crucial point. I think I can summarize this way:

 

1.       Place focus next to a message that has been posted to this list. do not open it.

 

2.       Press the applications key and arrow up to “rules submenu.” Press enter.

 

3.       Down arrow to “Create new rule.” Press enter.

 

4.       Now, use the tab and up and down arrow keys through the various options and select the ones that are right for you. You’ll need to listen carefully, but the verbalizations are pretty clear.

 

5.       For the address of the list, I typed simply “jfw” into the appropriate edit field.

 

From: Adrian Spratt [mailto:Adrian@...]
Sent: Monday, November 30, 2015 2:28 PM
To: jfw@groups.io
Subject: How to create a message rule for the new list

 

Many of us will want messages to the list sent to a separate folder. Here are the directions I copied and slightly edited that David Whitehead posted and that still work in Outlook 2010. I just created a rule using them.

 

message rules

David Whitehead. here's how I create a message rule/filter in Microsoft outlook 2010.

First I create the folder. Next we need to assign a rule/filter to the newly created folder, By doing the following;

1, highlight a message which you wish to create a folder for, Example; One of the messages from this group. Email clients with screen readers@... <mailto:Email clients with screen readers%40yahoogroups.com

2, press applications key, up arrow and enter on, Rules sub menu, Or, you could right arrow to open. Another way to do this is: Press applications key, press the letter "s" And then press the letter "u", which will directly place you into the message wizard. Here you will see the following screen; Always Move Messages From: email clients with screen readers@... <mailto:email clients with screen readers%40yahoogroups.com

Always Move Messages To: email clients with screen readers@... <mailto:email clients with screen readers%40yahoogroups.com

Create Rule... Manage Rules & Alerts... you now need to down arrow and enter on, create rule.... Note, as I indicated, if you use the shortcuts, the letter "s"&"u" no need to arrow anywhere, since you're in the message rule wizard.

3. you will now see a screen; Create Rule When I get e mail with all of the selected conditions From email clients with screen readers@... <mailto:email clients with screen readers%40yahoogroups.com by default this box is unchecked you can check this box.

When I get e mail with all of the selected conditions Subject contains [email clients with screen readers] Outlook 2007, this box is unchecked by default I would leave this box as it is.

When I get e mail with all of the selected conditions Sent to email clients with screen readers@... <mailto:email clients with screen readers%40yahoogroups.com this box is unchecked by default you can check this box. Do the following Display in the New Item Alert window by default this box is unchecked, you can leave as is. Do the following:Play a selected sound: this box is unchecked by default, you can check this box,

Browse... Here you could browse for a specific sound; Move the item to folder:this box is unchecked by default, however you need to check this box, Folder...press enter here, Now, you can arrow to the particular folder, Or, you can letter navigate, Then tab okay, press enter. OK Cancel Advanced Options... now you need to tab and enter on, Advanced options...

4. You will see the following screen;

Rules Wizard Which condition's do you want to check? Step 1: Select condition's checked on this computer only checked from email clients with screen readers@...

Etc. (lots of options to arrow down through)

This screen is fine, Just tab next and press enter.

5. now you will see the following screen; Rules Wizard What do you want to do with the message? Step 1: Select action's checked stop processing more rules

checked play a sound

checked move it to the email clients with screen readers folder not checked move a copy to the email clients with screen readers folder not checked assign it to the category category not checked delete it not checked permanently delete it forward it to people or public group not checked not checked forward it to people or public group as an attachment not checked reply using a specific template not checked flag message for follow up at this time not checked clear the Message Flag not checked clear message's categories not checked mark it as importance not checked print it not checked start application not checked mark it as read not checked run a script Step 2: Edit the rule description (click an underlined value) Apply this rule after the message arrives from email clients with screen readers@... <mailto:email clients with screen readers%40yahoogroups.com and sent to email clients with screen readers@... <mailto:email clients with screen readers%40yahoogroups.com and on this computer only play Windows Notify.wav and move it to the email clients with screen readers folder and stop processing more rules Cancel < Back Next Finish Again this screen is okay, just tab next and press enter.

6. the next screen you wil see is; Rules Wizard Are there any exceptions? Step 1: Select exception's (if necessary) not checked except if from people or public group not checked except if the subject contains specific words not checked except through the specified account not checked except if sent only to me not checked except where my name is in the To box not checked except if it is marked as importance not checked except if it is marked as sensitivity except if it is flagged for action not checked not checked except where my name is in the Cc box not checked except if my name is in the To or Cc box not checked except where my name is not in the To box not checked except if sent to people or public group not checked except if the body contains specific words not checked except if the subject or body contains specific words not checked except if the message header contains specific words not checked except with specific words in the recipient's address not checked except with specific words in the sender's address not checked except if assigned to category category Step 2: Edit the rule description (click an underlined value) Apply this rule after the message arrives from email clients with screen readers@... <mailto:email clients with screen readers%40yahoogroups.com and sent to email clients with screen readers@... <mailto:email clients with screen readers%40yahoogroups.com and on this computer only play Windows Notify.wav and move it to the email clients with screen readers folder and stop processing more rules Cancel < Back Next Finish Again, you can go to the next button and press enter.

7. now you're presented with the final screen;

Rules Wizard Finish rule setup. Step 1: Specify a name for this rule email clients with screen readers@... <mailto:email clients with screen readers%40yahoogroups.com Step 2: Setup rule options Run this rule now on messages already in "email clients with screen readers..." You need to check this box Turn on this rule this box should be checked, Create this rule on all accounts Step 3: Review rule description (click an underlined value to edit) Apply this rule after the message arrives from email clients with screen readers@... <mailto:email clients with screen readers%40yahoogroups.com and sent to email clients with screen readers@... <mailto:email clients with screen readers%40yahoogroups.com and on this computer only play Windows Notify.wav and move it to the email clients with screen readers folder and stop processing more rules Cancel < Back Next Finish Now,

tab to finish and press enter.

The rule and conditions will be applied. The messages will be moved from the inbox to the folder, where the message/rule/folder/filter has been created.


On the List

Kevin Wollenweber <dancingweed@...>
 

Here is my acknowledgment that I’ve been receiving all the messages, just so you have my address on file.

 

(sorry, I don’t mean to clog up everyone’s inbox with this.)

 

Kevin


Re: Testing

HAMILTON
 

Well, it works.

Jim H



Sent from my iPhone

On Nov 30, 2015, at 4:04 PM, Jim Ronald <jtmaronald@...> wrote:

 

 

Jim Ronald

 


Re: Testt only

O.Addison Gethers
 

Hello Marie , I don't hear it's say JFW list Re: Test only in e-mail

-----Original Message-----
From: Maria Campbell [mailto:lucky1@...]
Sent: Monday, November 30, 2015 5:50 PM
To: jfw@groups.io
Subject: Re: Testt only

Yes. The other list indicated that email was coming from the JFW list in
the from field I'd say. This one only has the sender but not the list ID.


On 11/30/2015 4:40 PM, O.Addison Gethers wrote:
Hello groups owner ,
I'm getting confuse about jfw list e-mail because I don't know if this
is groups e-mail !! I don't hear it's say JFW list with subject line.


-----Original Message-----
From: Marion Woods [mailto:marion_woods38@...]
Sent: Monday, November 30, 2015 4:59 PM
To: jfw@groups.io
Subject: Testt only



Contact marion_woods38@...
A proud member of the Roses Forum.

"The only person you are destined to become is the person you decide to
be."

Ralph Waldo Emerson





-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6176 / Virus Database: 4460/11089 - Release Date:
11/29/15




--

Sunny Day
Maria Campbell
lucky1@...

Trials without God will break you. Trials with God will make you.



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6176 / Virus Database: 4460/11089 - Release Date: 11/29/15


Re: Windows 10 question

David Moore
 

Hi,
I sure did, Thank you so much for correcting my mistake. Lauren, that is what the versions are. I need some more coffee. Take care.
 
 
From: empacc.net
Sent: Monday, November 30, 2015 4:23 PM
Subject: Re: Windows 10 question
 
hi david:
you actually got your jaws versions transposed.
the jaws version 16 should be either:
jaws 16.0.4350, or:
jaws 16.0.4463, or:
the latest version of jaws 17 which is:
jaws17.0.1214.
just clarifying, is all.
don't want anyone to be confused.
take care.
 
 

Sent: Monday, November 30, 2015 3:54 PM
Subject: Re: Windows 10 question
 
Hi Lauren,
You can upgrade without sighted help. You should install JAWS 17 first. Then, download the Tool from FS that will allow you to get rid of all previous JAWS versions from your computer along with shared components. The only version you should have on your computer is Version 17. If you want, You could also have version 16.0.1214. That will also work on Windows 10. Also, you will want to download the media creation tool from the MS page and save it to your computer. Make sure that you don’t run the media creation tool until you run that FS tool to get rid all versions of JAWS off your computer except 16.0.1214 and JAWS 17. Now, you can run the media creation tool to install win 10. Just press enter on the tool and press enter on upgrade this pc. JAWS will still be working. Once you get through some screens, JAWS will go quiet and this is when you wait an hour or more to let win10 download to your computer. It is around 3 gigs. After an hour, just turn on Narrator by pressing windows key + enter. You will be able to finish the install with Narrator. Now, since you have Windows 8, it should install fine after the first time. It is upgrading from Windows 7 that causes the trouble and it takes a few times. I upgraded from Windows 8.1, and it took me one time of running the media creation tool, and win10 installed great the first time. This is really important. When win10 installs and JAWS comes back talking, it is good to uninstall JAWS and reinstall JAWS. If you do this, even upgrading from win 8 or 8.1, you will get much better results from JAWS from then on out. Please email me if you have any questions. It is easy, and once win10 is on your computer, I can really help you get everything adjusted so you have the best experience using win10. You will love it and never want to go back. I will be thinking about you as you upgrade. Email me as soon as you have any questions. Take care, David Moore.
 
 
Sent: Monday, November 30, 2015 3:37 PM
Subject: Windows 10 question
 

Hi:

 

Now I have Win8, Jaws 14. Can I upgrade to Jaws 17 and then install Windows 10 myself or do I need sighted help? Is it ok to install Jaws first?

 

 

 

Sincerely,

 

Lauren

 

Howard Wolcott


Re: Test only

Adrian Spratt
 

For my message rule for this list today, I used the "To" line, where JFW does appear.

-----Original Message-----
From: Maria Campbell [mailto:lucky1@...]
Sent: Monday, November 30, 2015 5:50 PM
To: jfw@groups.io
Subject: Re: Testt only

Yes. The other list indicated that email was coming from the JFW list
in the from field I'd say. This one only has the sender but not the
list ID.


On 11/30/2015 4:40 PM, O.Addison Gethers wrote:
Hello groups owner ,
I'm getting confuse about jfw list e-mail because I don't know if this is
groups e-mail !! I don't hear it's say JFW list with subject line.


-----Original Message-----
From: Marion Woods [mailto:marion_woods38@...]
Sent: Monday, November 30, 2015 4:59 PM
To: jfw@groups.io
Subject: Testt only



Contact marion_woods38@...
A proud member of the Roses Forum.

"The only person you are destined to become is the person you decide to be."

Ralph Waldo Emerson





-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6176 / Virus Database: 4460/11089 - Release Date: 11/29/15




--

Sunny Day
Maria Campbell
lucky1@...

Trials without God will break you. Trials with God will make you.


Re: Admin: Digest users, contact me.

Elin Williams
 

Hi

Can I please be taken out of all the email threads?

 

Thanks

 

From: James Homuth [mailto:james@...]
Sent: 30 November 2015 21:39
To: jfw@groups.io
Subject: Admin: Digest users, contact me.

 

Anyone who should be on digest mode, please mail the ownership address. I will fix you as soon as I'm aware you need fixing.

 

James,

List Admin 


Re: Testt only

Maria Campbell
 

Yes. The other list indicated that email was coming from the JFW list in the from field I'd say. This one only has the sender but not the list ID.

On 11/30/2015 4:40 PM, O.Addison Gethers wrote:
Hello groups owner ,
I'm getting confuse about jfw list e-mail because I don't know if this is
groups e-mail !! I don't hear it's say JFW list with subject line.


-----Original Message-----
From: Marion Woods [mailto:marion_woods38@...]
Sent: Monday, November 30, 2015 4:59 PM
To: jfw@groups.io
Subject: Testt only



Contact marion_woods38@...
A proud member of the Roses Forum.

"The only person you are destined to become is the person you decide to be."

Ralph Waldo Emerson





-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6176 / Virus Database: 4460/11089 - Release Date: 11/29/15



--

Sunny Day
Maria Campbell
lucky1@...

Trials without God will break you. Trials with God will make you.


Re: Testt only

O.Addison Gethers
 

Hello groups owner ,
I'm getting confuse about jfw list e-mail because I don't know if this is
groups e-mail !! I don't hear it's say JFW list with subject line.

-----Original Message-----
From: Marion Woods [mailto:marion_woods38@...]
Sent: Monday, November 30, 2015 4:59 PM
To: jfw@groups.io
Subject: Testt only



Contact marion_woods38@...
A proud member of the Roses Forum.

"The only person you are destined to become is the person you decide to be."

Ralph Waldo Emerson





-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6176 / Virus Database: 4460/11089 - Release Date: 11/29/15


Re: Admin: Digest users, contact me.

Carrie Anton <carriea@...>
 

Hello James

Please place me in  digest mode.

Thank you

 

From: James Homuth [mailto:james@...]
Sent: Monday, November 30, 2015 2:39 PM
To: jfw@groups.io
Subject: Admin: Digest users, contact me.

 

Anyone who should be on digest mode, please mail the ownership address. I will fix you as soon as I'm aware you need fixing.

 

James,

List Admin 



This communication is intended for the use of the recipient to whom it is addressed, and may contain confidential, personal, and or privileged information. Please contact us immediately if you are not the intended recipient of this communication, and do not copy, distribute, or take action relying on it. Any communications received in error, or subsequent reply, should be deleted or destroyed.



Re: Admin: Digest users, contact me.

Peter Quaiattini
 

I attempted to configure myself for digest mode – thanks.

 

Peter_quaiattini@...

 

 

 

Peter Quaiattini | I&O Database Services | 7550 Ogden Dale Road SE T2C4X9 | Building 10

peter_quaiattini@... | w - 403-319-6579 | m - 403-710-0636 | Canadian Pacific

 

 

From: James Homuth [mailto:james@...]
Sent: Monday, November 30, 2015 2:39 PM
To: jfw@groups.io
Subject: Admin: Digest users, contact me.

 

Anyone who should be on digest mode, please mail the ownership address. I will fix you as soon as I'm aware you need fixing.

 

James,

List Admin 

------------------------------ IMPORTANT NOTICE - AVIS IMPORTANT ------------------------------ Computer viruses can be transmitted via email. Recipient should check this email and any attachments for the presence of viruses. Sender and sender company accept no liability for any damage caused by any virus transmitted by this email. This email transmission and any accompanying attachments contain confidential information intended only for the use of the individual or entity named above. Any dissemination, distribution, copying or action taken in reliance on the contents of this email by anyone other than the intended recipient is strictly prohibited. If you have received this email in error please immediately delete it and notify sender at the above email address. Le courrier electronique peut etre porteur de virus informatiques. Le destinataire doit donc passer le present courriel et les pieces qui y sont jointes au detecteur de virus. L' expediteur et son employeur declinent toute responsabilite pour les dommages causes par un virus contenu dans le courriel. Le present message et les pieces qui y sont jointes contiennent des renseignements confidentiels destines uniquement a la personne ou a l' organisme nomme ci-dessus. Toute diffusion, distribution, reproduction ou utilisation comme reference du contenu du message par une autre personne que le destinataire est formellement interdite. Si vous avez recu ce courriel par erreur, veuillez le detruire immediatement et en informer l' expediteur a l' adresse ci-dessus. ------------------------------ IMPORTANT NOTICE - AVIS IMPORTANT ------------------------------


Re: Admin: Digest users, contact me.

Robert Resnick
 

Thank you for putting me in digest mode.  Rresnick1@....

 

 

 

From: James Homuth [mailto:james@...]
Sent: Monday, November 30, 2015 4:39 PM
To: jfw@groups.io
Subject: Admin: Digest users, contact me.

 

Anyone who should be on digest mode, please mail the ownership address. I will fix you as soon as I'm aware you need fixing.

 

James,

List Admin 


Testt only

Marion Woods <marion_woods38@...>
 

Contact marion_woods38@...
A proud member of the Roses Forum.

“The only person you are destined to become is the person you decide to be.” Ralph Waldo Emerson


Re: Admin: Digest users, contact me.

 

Hi,

Actually, you can log in either via Facebook or Google (the latter is useful for those who have a Gmail account). Good luck.

Cheers,

Joseph

 

From: Walker, Michael E [mailto:michael.e.walker3@...]
Sent: Monday, November 30, 2015 1:43 PM
To: jfw@groups.io
Subject: Re: Admin: Digest users, contact me.

 

Those who prefer to be in digest mode may also want to know that they can fix themselves, by clicking on the link to change subscription preferences, at the bottom of each email that has already been sent. If a password is prompted for, and they do not already have one, they can click that they either forgot password, or do not have one. They then enter an email address, where a link to reset the password will be sent. After that, they can log in and change their preference to digest mode. This is the approach I took.

 

From: James Homuth [mailto:james@...]
Sent: Monday, November 30, 2015 3:39 PM
To: jfw@groups.io
Subject: Admin: Digest users, contact me.

 

Anyone who should be on digest mode, please mail the ownership address. I will fix you as soon as I'm aware you need fixing.

 

James,

List Admin 


Re: Admin: Digest users, contact me.

Larry Kontz <kontzle@...>
 

Could you please change my deliver to the digest form... Thanks so much, Larry
 
Sent: Monday, November 30, 2015 2:39 PM
Subject: Admin: Digest users, contact me.
 

Anyone who should be on digest mode, please mail the ownership address. I will fix you as soon as I'm aware you need fixing.

 

James,

List Admin




Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com



Re: List Migration largely complete.

Deb and the girls
 

I use jaws at home and Window-eyes at work.  Anyone had any problems with WE 8.4 and ie11 not playing nice with each other?

 

From: James Homuth [mailto:james@...]
Sent: Monday, November 30, 2015 3:29 PM
To: jfw@groups.io
Subject: Re: List Migration largely complete.

 

This list has not, and will not, put anything in the subject line. I've tried that before and very nearly had a civil war on my hands. It should be easy enough to filter based on the from or to/cc address.

 

James,

List Admin

 

 On Mon, Nov 30, 2015 at 01:22 pm, Gerald Levy

wrote:

 

But the subject field does not contain the name of this list, like every other list I belong to.

 

Gerald

 

 

 

Sent: Monday, November 30, 2015 4:13 PM

Subject: Re: List Migration largely complete.

 

Hi all,

I am getting all messages at the new address, working great. Thank you, because I like Groups.io better and this will make for a great future.

 

 

Sent: Monday, November 30, 2015 1:55 PM

Subject: Re: List Migration largely complete.

 

All good here.

 

From: James Homuth [mailto:james@...]
Sent: Monday, November 30, 2015 11:45 AM
To: jfw@groups.io
Subject: List Migration largely complete.

 

Everyone has been moved over successfully from the old list. I'll now be working with the groups.io folks to get our archives moved over. If there are issues with the new list, feel free to address them with me at your convenience.

 

Moderator candidates, I will be getting in touch with those I've chosen later in the week. It was supposed to have been done by now, but unforseen complications have put a bit of a kink in that plan.

 

James,

List Admin

 

 

This list has not, and will not, put anything in the subject line. I've tried that before and very nearly had a civil war on my hands. It should be easy enough to filter based on the from or to/cc address.

 

James,

List Admin

 


Re: Admin: Digest users, contact me.

Amy Bower
 

I would like to go to digest mode. my e-mail is abower@.... thanks.

Sent from my iPhone

On Nov 30, 2015, at 4:39 PM, James Homuth <james@...> wrote:

Anyone who should be on digest mode, please mail the ownership address. I will fix you as soon as I'm aware you need fixing.

 

James,

List Admin 


Re: RSS feature for he list

Dennis Brown
 

Yep.  You have to subscribe to the feed even though you are subscribed to the list.  Haven’t tried to reply via feed yet, but will do so and report.
 
Sent: Monday, November 30, 2015 4:32 PM
Subject: Re: RSS feature for he list
 

Hi,

 

I wonder if you can go no-mail and just use the feed.

 

From: Dennis Brown [mailto:DennisTBrown@...]
Sent: Monday, November 30, 2015 12:58 PM
To: jfw@groups.io
Subject: RSS feature for he list

 

Hi guys,

When I went to the new list site, I found a link for Feed.  I subscribed and was very pleasantly surprised to find that I can now read the list in my feed reader!  I use IE, so the h takes me to the beginning of each message!  Nice switch-over!


Thanks,
Dennis Brown

67781 - 67800 of 102605