Date   

moderated Re: bank on line bill pay

T. Civitello
 

Thanks, Chase is one that I will check out as there is a branch nearby. Tom

-----Original Message-----
From: Gene Warner
Sent: Tuesday, July 26, 2022 10:32 AM
To: main@jfw.groups.io
Subject: Re: bank on line bill pay

I bank with Chase and they are quite accessible except for some parts of
their iOS app.
Aira has free access with TD Bank, whether that means they're accessible
or not I can't say.
And I've had some people say that Capitol One is accessible though like
TD Bank I have no experience with them to know for sure.

Gene...



On 7/26/2022 1:23 PM, T. Civitello wrote:
I need to change my bank to one with good accessibility. ould be welcome. Thanks Tom


moderated Re: bank on line bill pay

dennis
 

pnc is very accessible.

On 7/26/2022 12:32 PM, Gene Warner wrote:
I bank with Chase and they are quite accessible except for some parts of their iOS app.
Aira has free access with TD Bank, whether that means they're accessible or not I can't say.
And I've had some people say that Capitol One is accessible though like TD Bank I have no experience with them to know for sure.

Gene...



On 7/26/2022 1:23 PM, T. Civitello wrote:
I need to change my bank to one with good accessibility.     ould be welcome.  Thanks Tom


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


moderated Re: bank on line bill pay

Gene Warner
 

I bank with Chase and they are quite accessible except for some parts of their iOS app.
Aira has free access with TD Bank, whether that means they're accessible or not I can't say.
And I've had some people say that Capitol One is accessible though like TD Bank I have no experience with them to know for sure.

Gene...

On 7/26/2022 1:23 PM, T. Civitello wrote:
I need to change my bank to one with good accessibility.     ould be welcome.  Thanks Tom


moderated Re: bank on line bill pay

T. Civitello
 

Sorry, but most of this message disappeared on me. Tom
 
Sent: Tuesday, July 26, 2022 10:23 AM
Subject: bank on line bill pay
 
I need to change my bank to one with good accessibility.     ould be welcome.  Thanks Tom


moderated bank on line bill pay

T. Civitello
 

I need to change my bank to one with good accessibility.     ould be welcome.  Thanks Tom


moderated Re: getting jaws to pronounce the euros symbol.

Patrick Murphy
 

hi,
can anyone help me with this?
i know, that the shortcut key in windows for the euros symbol is ctrl-alt-e.
however, when i press this shortcut, jaws says "e ecute".
i know this sounds funny, but it is saying the letter "e" with some sort of symbol after it, like a french accent or something like that.
i was able to get it to say "euros sign" before with this combination.
i have searched the settings center up and down, and i cannot find anything.
please, please, please help me before i go insane!!!
i am using jaws 2021 latest version.
it is not related to any particular program, it happens for everything.

regards and thanks,

patrick


moderated A question about Team Viewer

Dave Durber
 

Hello Everyone:
 
I have just installed Team viewer on 2 of my computers and successfully set up a connection between them. However, from the remote computer, I cannot use the JAWS desktop keyboard layout commands Nor, the JAWS laptop keyboard layout commands to read screen information on the server computer, this includes using the CTRL key, to silence JAWS. When I try to use any JAWS command, to read screen information on the server system, JAWS on the remote system says "blank". Is this a problem with Team Viewer? Does anyone have a solution to this problem?
 
Dave
 


moderated Re: Routers which have an interface which is accessible using JAWS

Dave Durber
 

Glenn:
 
Thank you for the information.
 
Dave
 

----- Original Message -----
Sent: Monday, July 25, 2022 7:52 PM
Subject: Re: Routers which have an interface which is accessible using JAWS

Dave,
I logged into my router, and all I can find is:
Linksys Smart-Wifi
Mine has three removable antennas and two USB ports on it, if that helps narrow down the model.
Glenn
 
----- Original Message -----
Sent: Monday, July 25, 2022 3:05 AM
Subject: Re: Routers which have an interface which is accessible using JAWS

Glenn:
 
Do you happen to know if the router you have is still available? If it is, what is the model number?
 
Dave
 
----- Original Message -----
Sent: Sunday, July 24, 2022 9:13 PM
Subject: Re: Routers which have an interface which is accessible using JAWS

Hi Dave,
I use a Linksys Smart router, but I don't use any Linksys software, I use the web interface, and I find that Internet Explorer works better than the three main browsers for router interface.
Glenn
----- Original Message -----
Sent: Sunday, July 24, 2022 3:08 PM
Subject: Routers which have an interface which is accessible using JAWS

Hello everyone:
 
I need to set up port forwarding for a particular purpose. My ISP provider, is EE. The router's interface is mostly accessible. I was able to choose the device from the list, enter the start and end port forwarding addresses but, I could not find the button to press, which saves the new settings. I called EE and explained my problem. EE sent a technician to my home to try and help me set up the port forwarding function, which is when we discovered there were a couple of buttons on the port forwarding page which had been designed as graphics, which of course,no screen reader cannot speak.
 
Now, I am looking for a router, which has an interface, which is accessible using JAWS. Until 2014, when Annie and I moved to the UK, we always had Lynksys routers. Are the modern day Lynksys routers fully accessible using JAWS, if not, can any list members recommend a router, which is accessible, using JAWS.
 
Any suggestions, must contain both make and model numbers.
 
Thank you in anticipation for any and all suggestions.
 
Dave Durberr
 
 


moderated Re: Routers which have an interface which is accessible using JAWS

Dave Durber
 

Thank you Gklenn.
 
Dave
 

----- Original Message -----
Sent: Monday, July 25, 2022 4:19 PM
Subject: Re: Routers which have an interface which is accessible using JAWS

Dave, I'll see if I can find the model by logging into it.
I'll let you know.
Glenn
----- Original Message -----
Sent: Monday, July 25, 2022 3:05 AM
Subject: Re: Routers which have an interface which is accessible using JAWS

Glenn:
 
Do you happen to know if the router you have is still available? If it is, what is the model number?
 
Dave
 
----- Original Message -----
Sent: Sunday, July 24, 2022 9:13 PM
Subject: Re: Routers which have an interface which is accessible using JAWS

Hi Dave,
I use a Linksys Smart router, but I don't use any Linksys software, I use the web interface, and I find that Internet Explorer works better than the three main browsers for router interface.
Glenn
----- Original Message -----
Sent: Sunday, July 24, 2022 3:08 PM
Subject: Routers which have an interface which is accessible using JAWS

Hello everyone:
 
I need to set up port forwarding for a particular purpose. My ISP provider, is EE. The router's interface is mostly accessible. I was able to choose the device from the list, enter the start and end port forwarding addresses but, I could not find the button to press, which saves the new settings. I called EE and explained my problem. EE sent a technician to my home to try and help me set up the port forwarding function, which is when we discovered there were a couple of buttons on the port forwarding page which had been designed as graphics, which of course,no screen reader cannot speak.
 
Now, I am looking for a router, which has an interface, which is accessible using JAWS. Until 2014, when Annie and I moved to the UK, we always had Lynksys routers. Are the modern day Lynksys routers fully accessible using JAWS, if not, can any list members recommend a router, which is accessible, using JAWS.
 
Any suggestions, must contain both make and model numbers.
 
Thank you in anticipation for any and all suggestions.
 
Dave Durberr
 
 


moderated Re: Routers which have an interface which is accessible using JAWS

K0LNY
 

Dave,
I logged into my router, and all I can find is:
Linksys Smart-Wifi
Mine has three removable antennas and two USB ports on it, if that helps narrow down the model.
Glenn
 

----- Original Message -----
Sent: Monday, July 25, 2022 3:05 AM
Subject: Re: Routers which have an interface which is accessible using JAWS

Glenn:
 
Do you happen to know if the router you have is still available? If it is, what is the model number?
 
Dave
 
----- Original Message -----
Sent: Sunday, July 24, 2022 9:13 PM
Subject: Re: Routers which have an interface which is accessible using JAWS

Hi Dave,
I use a Linksys Smart router, but I don't use any Linksys software, I use the web interface, and I find that Internet Explorer works better than the three main browsers for router interface.
Glenn
----- Original Message -----
Sent: Sunday, July 24, 2022 3:08 PM
Subject: Routers which have an interface which is accessible using JAWS

Hello everyone:
 
I need to set up port forwarding for a particular purpose. My ISP provider, is EE. The router's interface is mostly accessible. I was able to choose the device from the list, enter the start and end port forwarding addresses but, I could not find the button to press, which saves the new settings. I called EE and explained my problem. EE sent a technician to my home to try and help me set up the port forwarding function, which is when we discovered there were a couple of buttons on the port forwarding page which had been designed as graphics, which of course,no screen reader cannot speak.
 
Now, I am looking for a router, which has an interface, which is accessible using JAWS. Until 2014, when Annie and I moved to the UK, we always had Lynksys routers. Are the modern day Lynksys routers fully accessible using JAWS, if not, can any list members recommend a router, which is accessible, using JAWS.
 
Any suggestions, must contain both make and model numbers.
 
Thank you in anticipation for any and all suggestions.
 
Dave Durberr
 
 


moderated Re: Routers which have an interface which is accessible using JAWS

Karen Reynolds
 

Hi Richard,

Here it is. You may need to choose the service you are getting to see what is compatible with their equipment.

 

https://www.spectrum.net/support/internet/compliant-modems-spectrum-network

 

Karen

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard B. McDonald
Sent: Monday, July 25, 2022 11:22 AM
To: main@jfw.groups.io
Subject: Re: Routers which have an interface which is accessible using JAWS

 

Hi Karen!

 

Soon, I am likely to get Spectrum cable Internet in California (Rancho Cucamonga).  I would probably have this same issue.  Could you please reply with the link to the Spectrum website where they list compatible routers?

 

Thanks!

Richard

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Karen Reynolds
Sent: Monday, July 25, 2022 6:40 AM
To: main@jfw.groups.io
Subject: Re: Routers which have an interface which is accessible using JAWS

 

Hi Dave,

We have that same issue with the router that came with Spectrum. The tech who came out suggested the Asus router that they list will work on their website with their equipment. You might want to find out which routers work with their equipment and then find out which one is accessible.

 

Karen

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Monday, July 25, 2022 4:09 AM
To: main@jfw.groups.io
Subject: Re: Routers which have an interface which is accessible using JAWS

 

Glenn:

 

I forgot to mention, The EE router, does have a web interface but, as I said before, there are buttons which are not standard HTML buttons, which is why JAWS will not recognize them.

 

Dave

 

----- Original Message -----

Sent: Sunday, July 24, 2022 9:13 PM

Subject: Re: Routers which have an interface which is accessible using JAWS

 

Hi Dave,

I use a Linksys Smart router, but I don't use any Linksys software, I use the web interface, and I find that Internet Explorer works better than the three main browsers for router interface.

Glenn

----- Original Message -----

Sent: Sunday, July 24, 2022 3:08 PM

Subject: Routers which have an interface which is accessible using JAWS

 

Hello everyone:

 

I need to set up port forwarding for a particular purpose. My ISP provider, is EE. The router's interface is mostly accessible. I was able to choose the device from the list, enter the start and end port forwarding addresses but, I could not find the button to press, which saves the new settings. I called EE and explained my problem. EE sent a technician to my home to try and help me set up the port forwarding function, which is when we discovered there were a couple of buttons on the port forwarding page which had been designed as graphics, which of course,no screen reader cannot speak.

 

Now, I am looking for a router, which has an interface, which is accessible using JAWS. Until 2014, when Annie and I moved to the UK, we always had Lynksys routers. Are the modern day Lynksys routers fully accessible using JAWS, if not, can any list members recommend a router, which is accessible, using JAWS.

 

Any suggestions, must contain both make and model numbers.

 

Thank you in anticipation for any and all suggestions.

 

Dave Durberr

 

 


moderated Re: Routers which have an interface which is accessible using JAWS

Gene Warner
 

Yeah, I have my choice of three companies here.

Gene...

On 7/25/2022 12:23 PM, Glenn / Lenny wrote:
My ISP stopped allowing third-party modems.
I used to by mine from their recommended modems, but then they replaced mine with one of their own and decided that they would rather charge for leasing them to everyone.
I'm in the process now of switching from Sparklight to Allo, for multiple reasons.
I'm glad my town finally quit the practice of only letting the one exclusive company and allowed other companies to come in for competition.
Glenn
----- Original Message -----
*From:* Cristóbal <mailto:cristobalmuli@...>
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Sent:* Monday, July 25, 2022 11:16 AM
*Subject:* Re: Routers which have an interface which is accessible using JAWS
I’m with Spectrum in Fontana. I don’t think the router is the issue as
much as the modem. Since I’ve been with them, I think I’ve used  a
TP-Link, Linksys and have been using an Eero mesh WiFi system for the
past four or so years now. Where you do have to pay attention I
believe is the modem that you use if you want to use your own which is
generally the better choice. You don’t have to pay the expensive
monthly rental fee and you can get a much better modem than what
you’re usually given by your ISP. Checking my Amazon order history,
looks like I bought my ARRIS Surfboard SB6190 back in June of 2016. I
just had to call Spectrum at the time and read them off the Mac or
whatever number off of the modem so they could ping or register it and
I was good to go. Other than that, it’s been plug and play and forget
about it but for a few area outages. From what I recall, navigating
the TP-Link and Linksys with Jaws were accessible enough to do what I
needed to do with ports and tweaking this and that, but as far as
Eero, I’ve only used the iOS app when messing around with the interface.
Cristóbal
*From:* main@jfw.groups.io <main@jfw.groups.io> *On Behalf Of *Richard B. McDonald
*Sent:* Monday, July 25, 2022 8:22 AM
*To:* main@jfw.groups.io
*Subject:* Re: Routers which have an interface which is accessible using JAWS
Hi Karen!
Soon, I am likely to get Spectrum cable Internet in California (Rancho Cucamonga).  I would probably have this same issue.  Could you please reply with the link to the Spectrum website where they list compatible routers?
Thanks!
Richard
*From:* main@jfw.groups.io <mailto:main@jfw.groups.io> <main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Karen Reynolds
*Sent:* Monday, July 25, 2022 6:40 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: Routers which have an interface which is accessible using JAWS
Hi Dave,
We have that same issue with the router that came with Spectrum. The tech who came out suggested the Asus router that they list will work on their website with their equipment. You might want to find out which routers work with their equipment and then find out which one is accessible.
Karen
*From:* main@jfw.groups.io <mailto:main@jfw.groups.io> <main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Dave Durber
*Sent:* Monday, July 25, 2022 4:09 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: Routers which have an interface which is accessible using JAWS
Glenn:
I forgot to mention, The EE router, does have a web interface but, as I said before, there are buttons which are not standard HTML buttons, which is why JAWS will not recognize them.
Dave
----- Original Message -----
*From:*Glenn / Lenny <mailto:glenn@...>
*To:*main@jfw.groups.io <mailto:main@jfw.groups.io>
*Sent:*Sunday, July 24, 2022 9:13 PM
*Subject:*Re: Routers which have an interface which is accessible
using JAWS
Hi Dave,
I use a Linksys Smart router, but I don't use any Linksys software,
I use the web interface, and I find that Internet Explorer works
better than the three main browsers for router interface.
Glenn
----- Original Message -----
*From:*Dave Durber <mailto:d.durber@...>
*To:*main@jfw.groups.io <mailto:main@jfw.groups.io>
*Sent:*Sunday, July 24, 2022 3:08 PM
*Subject:*Routers which have an interface which is accessible using JAWS
Hello everyone:
I need to set up port forwarding for a particular purpose. My ISP
provider, is EE. The router's interface is mostly accessible. I was
able to choose the device from the list, enter the start and end
port forwarding addresses but, I could not find the button to press,
which saves the new settings. I called EE and explained my problem.
EE sent a technician to my home to try and help me set up the port
forwarding function, which is when we discovered there were a couple
of buttons on the port forwarding page which had been designed as
graphics, which of course,no screen reader cannot speak.
Now, I am looking for a router, which has an interface, which is
accessible using JAWS. Until 2014, when Annie and I moved to the UK,
we always had Lynksys routers. Are the modern day Lynksys routers
fully accessible using JAWS, if not, can any list members
recommend a router, which is accessible, using JAWS.
Any suggestions, must contain both make and model numbers.
Thank you in anticipation for any and all suggestions.
Dave Durberr


moderated Re: Routers which have an interface which is accessible using JAWS

K0LNY
 

My ISP stopped allowing third-party modems.
I used to by mine from their recommended modems, but then they replaced mine with one of their own and decided that they would rather charge for leasing them to everyone.
I'm in the process now of switching from Sparklight to Allo, for multiple reasons.
I'm glad my town finally quit the practice of only letting the one exclusive company and allowed other companies to come in for competition.
 
Glenn

----- Original Message -----
From: Cristóbal
Sent: Monday, July 25, 2022 11:16 AM
Subject: Re: Routers which have an interface which is accessible using JAWS

I’m with Spectrum in Fontana. I don’t think the router is the issue as much as the modem. Since I’ve been with them, I think I’ve used  a TP-Link, Linksys and have been using an Eero mesh WiFi system for the past four or so years now. Where you do have to pay attention I believe is the modem that you use if you want to use your own which is generally the better choice. You don’t have to pay the expensive monthly rental fee and you can get a much better modem than what you’re usually given by your ISP. Checking my Amazon order history, looks like I bought my ARRIS Surfboard SB6190 back in June of 2016. I just had to call Spectrum at the time and read them off the Mac or whatever number off of the modem so they could ping or register it and I was good to go. Other than that, it’s been plug and play and forget about it but for a few area outages. From what I recall, navigating the TP-Link and Linksys with Jaws were accessible enough to do what I needed to do with ports and tweaking this and that, but as far as Eero, I’ve only used the iOS app when messing around with the interface.

 

Cristóbal

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard B. McDonald
Sent: Monday, July 25, 2022 8:22 AM
To: main@jfw.groups.io
Subject: Re: Routers which have an interface which is accessible using JAWS

 

Hi Karen!

 

Soon, I am likely to get Spectrum cable Internet in California (Rancho Cucamonga).  I would probably have this same issue.  Could you please reply with the link to the Spectrum website where they list compatible routers?

 

Thanks!

Richard

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Karen Reynolds
Sent: Monday, July 25, 2022 6:40 AM
To: main@jfw.groups.io
Subject: Re: Routers which have an interface which is accessible using JAWS

 

Hi Dave,

We have that same issue with the router that came with Spectrum. The tech who came out suggested the Asus router that they list will work on their website with their equipment. You might want to find out which routers work with their equipment and then find out which one is accessible.

 

Karen

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Monday, July 25, 2022 4:09 AM
To: main@jfw.groups.io
Subject: Re: Routers which have an interface which is accessible using JAWS

 

Glenn:

 

I forgot to mention, The EE router, does have a web interface but, as I said before, there are buttons which are not standard HTML buttons, which is why JAWS will not recognize them.

 

Dave

 

----- Original Message -----

Sent: Sunday, July 24, 2022 9:13 PM

Subject: Re: Routers which have an interface which is accessible using JAWS

 

Hi Dave,

I use a Linksys Smart router, but I don't use any Linksys software, I use the web interface, and I find that Internet Explorer works better than the three main browsers for router interface.

Glenn

----- Original Message -----

From: Dave Durber

Sent: Sunday, July 24, 2022 3:08 PM

Subject: Routers which have an interface which is accessible using JAWS

 

Hello everyone:

 

I need to set up port forwarding for a particular purpose. My ISP provider, is EE. The router's interface is mostly accessible. I was able to choose the device from the list, enter the start and end port forwarding addresses but, I could not find the button to press, which saves the new settings. I called EE and explained my problem. EE sent a technician to my home to try and help me set up the port forwarding function, which is when we discovered there were a couple of buttons on the port forwarding page which had been designed as graphics, which of course,no screen reader cannot speak.

 

Now, I am looking for a router, which has an interface, which is accessible using JAWS. Until 2014, when Annie and I moved to the UK, we always had Lynksys routers. Are the modern day Lynksys routers fully accessible using JAWS, if not, can any list members recommend a router, which is accessible, using JAWS.

 

Any suggestions, must contain both make and model numbers.

 

Thank you in anticipation for any and all suggestions.

 

Dave Durberr

 

 


moderated Re: Routers which have an interface which is accessible using JAWS

Cristóbal
 

I’m with Spectrum in Fontana. I don’t think the router is the issue as much as the modem. Since I’ve been with them, I think I’ve used  a TP-Link, Linksys and have been using an Eero mesh WiFi system for the past four or so years now. Where you do have to pay attention I believe is the modem that you use if you want to use your own which is generally the better choice. You don’t have to pay the expensive monthly rental fee and you can get a much better modem than what you’re usually given by your ISP. Checking my Amazon order history, looks like I bought my ARRIS Surfboard SB6190 back in June of 2016. I just had to call Spectrum at the time and read them off the Mac or whatever number off of the modem so they could ping or register it and I was good to go. Other than that, it’s been plug and play and forget about it but for a few area outages. From what I recall, navigating the TP-Link and Linksys with Jaws were accessible enough to do what I needed to do with ports and tweaking this and that, but as far as Eero, I’ve only used the iOS app when messing around with the interface.

 

Cristóbal

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard B. McDonald
Sent: Monday, July 25, 2022 8:22 AM
To: main@jfw.groups.io
Subject: Re: Routers which have an interface which is accessible using JAWS

 

Hi Karen!

 

Soon, I am likely to get Spectrum cable Internet in California (Rancho Cucamonga).  I would probably have this same issue.  Could you please reply with the link to the Spectrum website where they list compatible routers?

 

Thanks!

Richard

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Karen Reynolds
Sent: Monday, July 25, 2022 6:40 AM
To: main@jfw.groups.io
Subject: Re: Routers which have an interface which is accessible using JAWS

 

Hi Dave,

We have that same issue with the router that came with Spectrum. The tech who came out suggested the Asus router that they list will work on their website with their equipment. You might want to find out which routers work with their equipment and then find out which one is accessible.

 

Karen

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Monday, July 25, 2022 4:09 AM
To: main@jfw.groups.io
Subject: Re: Routers which have an interface which is accessible using JAWS

 

Glenn:

 

I forgot to mention, The EE router, does have a web interface but, as I said before, there are buttons which are not standard HTML buttons, which is why JAWS will not recognize them.

 

Dave

 

----- Original Message -----

Sent: Sunday, July 24, 2022 9:13 PM

Subject: Re: Routers which have an interface which is accessible using JAWS

 

Hi Dave,

I use a Linksys Smart router, but I don't use any Linksys software, I use the web interface, and I find that Internet Explorer works better than the three main browsers for router interface.

Glenn

----- Original Message -----

Sent: Sunday, July 24, 2022 3:08 PM

Subject: Routers which have an interface which is accessible using JAWS

 

Hello everyone:

 

I need to set up port forwarding for a particular purpose. My ISP provider, is EE. The router's interface is mostly accessible. I was able to choose the device from the list, enter the start and end port forwarding addresses but, I could not find the button to press, which saves the new settings. I called EE and explained my problem. EE sent a technician to my home to try and help me set up the port forwarding function, which is when we discovered there were a couple of buttons on the port forwarding page which had been designed as graphics, which of course,no screen reader cannot speak.

 

Now, I am looking for a router, which has an interface, which is accessible using JAWS. Until 2014, when Annie and I moved to the UK, we always had Lynksys routers. Are the modern day Lynksys routers fully accessible using JAWS, if not, can any list members recommend a router, which is accessible, using JAWS.

 

Any suggestions, must contain both make and model numbers.

 

Thank you in anticipation for any and all suggestions.

 

Dave Durberr

 

 


moderated Re: Routers which have an interface which is accessible using JAWS

K0LNY
 

I've looked into it, but haven't tried it yet.
Glenn

----- Original Message -----
From: "Gene Warner" <genewarner3@...>
To: <main@jfw.groups.io>
Sent: Monday, July 25, 2022 10:31 AM
Subject: Re: Routers which have an interface which is accessible using JAWS


You did.

Gene...


On 7/25/2022 11:24 AM, Glenn / Lenny wrote:
I wonder if anyone has installed OpenWRT on a router and used it with a
screenreader?
That is open source firmware that gives more functionality to a router.
I hope I got that name right.
Glenn
----- Original Message -----
From: "John Covici" <covici@...>
To: <main@jfw.groups.io>
Sent: Monday, July 25, 2022 8:04 AM
Subject: Re: Routers which have an interface which is accessible using
JAWS


Winbox for the Mikrotik is not very accessible, I tried it a few
times, but no joy.

On Mon, 25 Jul 2022 08:51:42 -0400,
Gene Warner wrote:

Not necessarily, my first router from years ago continued to get
firmware updates for quite a while after they stopped selling
it. I forgot which brand it was.

Gene...

On 7/25/2022 8:42 AM, Life in Six Dots wrote:
The only problem with using a discontinued router would be the lack of
security updates.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Gene Warner
Sent: Monday, 25 July 2022 13:14
To: main@jfw.groups.io
Subject: Re: Routers which have an interface which is accessible using
JAWS

Even if the router isn't being sold any more, I'll bet you can find one
on eBay.

Gene...


On 7/25/2022 4:08 AM, Dave Durber wrote:
Glenn:
I forgot to mention, The EE router, does have a web interface but, as
I said before, there are buttons which are not standard HTML buttons,
which is why JAWS will not recognize them.
Dave

----- Original Message -----
*From:* Glenn / Lenny <mailto:glenn@...>
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Sent:* Sunday, July 24, 2022 9:13 PM
*Subject:* Re: Routers which have an interface which is
accessible
using JAWS

Hi Dave,
I use a Linksys Smart router, but I don't use any Linksys
software,
I use the web interface, and I find that Internet Explorer works
better than the three main browsers for router interface.
Glenn
----- Original Message -----
*From:* Dave Durber <mailto:d.durber@...>
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Sent:* Sunday, July 24, 2022 3:08 PM
*Subject:* Routers which have an interface which is accessible
using
JAWS

Hello everyone:
I need to set up port forwarding for a particular purpose. My ISP
provider, is EE. The router's interface is mostly accessible. I
was
able to choose the device from the list, enter the start and end
port forwarding addresses but, I could not find the button to
press,
which saves the new settings. I called EE and explained my
problem.
EE sent a technician to my home to try and help me set up the
port
forwarding function, which is when we discovered there were a
couple
of buttons on the port forwarding page which had been designed as
graphics, which of course,no screen reader cannot speak.
Now, I am looking for a router, which has an interface, which is
accessible using JAWS. Until 2014, when Annie and I moved to the
UK,
we always had Lynksys routers. Are the modern day Lynksys routers
fully accessible using JAWS, if not, can any list members
recommend a router, which is accessible, using JAWS.
Any suggestions, must contain both make and model numbers.
Thank you in anticipation for any and all suggestions.
Dave Durberr















moderated Re: Routers which have an interface which is accessible using JAWS

Gene Warner
 

You did.

Gene...

On 7/25/2022 11:24 AM, Glenn / Lenny wrote:
I wonder if anyone has installed OpenWRT on a router and used it with a
screenreader?
That is open source firmware that gives more functionality to a router.
I hope I got that name right.
Glenn
----- Original Message -----
From: "John Covici" <covici@...>
To: <main@jfw.groups.io>
Sent: Monday, July 25, 2022 8:04 AM
Subject: Re: Routers which have an interface which is accessible using JAWS
Winbox for the Mikrotik is not very accessible, I tried it a few
times, but no joy.
On Mon, 25 Jul 2022 08:51:42 -0400,
Gene Warner wrote:

Not necessarily, my first router from years ago continued to get
firmware updates for quite a while after they stopped selling
it. I forgot which brand it was.

Gene...

On 7/25/2022 8:42 AM, Life in Six Dots wrote:
The only problem with using a discontinued router would be the lack of
security updates.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Gene Warner
Sent: Monday, 25 July 2022 13:14
To: main@jfw.groups.io
Subject: Re: Routers which have an interface which is accessible using
JAWS

Even if the router isn't being sold any more, I'll bet you can find one
on eBay.

Gene...


On 7/25/2022 4:08 AM, Dave Durber wrote:
Glenn:
I forgot to mention, The EE router, does have a web interface but, as
I said before, there are buttons which are not standard HTML buttons,
which is why JAWS will not recognize them.
Dave

----- Original Message -----
*From:* Glenn / Lenny <mailto:glenn@...>
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Sent:* Sunday, July 24, 2022 9:13 PM
*Subject:* Re: Routers which have an interface which is accessible
using JAWS

Hi Dave,
I use a Linksys Smart router, but I don't use any Linksys
software,
I use the web interface, and I find that Internet Explorer works
better than the three main browsers for router interface.
Glenn
----- Original Message -----
*From:* Dave Durber <mailto:d.durber@...>
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Sent:* Sunday, July 24, 2022 3:08 PM
*Subject:* Routers which have an interface which is accessible
using
JAWS

Hello everyone:
I need to set up port forwarding for a particular purpose. My ISP
provider, is EE. The router's interface is mostly accessible. I
was
able to choose the device from the list, enter the start and end
port forwarding addresses but, I could not find the button to
press,
which saves the new settings. I called EE and explained my
problem.
EE sent a technician to my home to try and help me set up the port
forwarding function, which is when we discovered there were a
couple
of buttons on the port forwarding page which had been designed as
graphics, which of course,no screen reader cannot speak.
Now, I am looking for a router, which has an interface, which is
accessible using JAWS. Until 2014, when Annie and I moved to the
UK,
we always had Lynksys routers. Are the modern day Lynksys routers
fully accessible using JAWS, if not, can any list members
recommend a router, which is accessible, using JAWS.
Any suggestions, must contain both make and model numbers.
Thank you in anticipation for any and all suggestions.
Dave Durberr















moderated Re: Routers which have an interface which is accessible using JAWS

K0LNY
 

I wonder if anyone has installed OpenWRT on a router and used it with a
screenreader?
That is open source firmware that gives more functionality to a router.
I hope I got that name right.
Glenn

----- Original Message -----
From: "John Covici" <covici@...>
To: <main@jfw.groups.io>
Sent: Monday, July 25, 2022 8:04 AM
Subject: Re: Routers which have an interface which is accessible using JAWS


Winbox for the Mikrotik is not very accessible, I tried it a few
times, but no joy.

On Mon, 25 Jul 2022 08:51:42 -0400,
Gene Warner wrote:

Not necessarily, my first router from years ago continued to get
firmware updates for quite a while after they stopped selling
it. I forgot which brand it was.

Gene...

On 7/25/2022 8:42 AM, Life in Six Dots wrote:
The only problem with using a discontinued router would be the lack of
security updates.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Gene Warner
Sent: Monday, 25 July 2022 13:14
To: main@jfw.groups.io
Subject: Re: Routers which have an interface which is accessible using
JAWS

Even if the router isn't being sold any more, I'll bet you can find one
on eBay.

Gene...


On 7/25/2022 4:08 AM, Dave Durber wrote:
Glenn:
I forgot to mention, The EE router, does have a web interface but, as
I said before, there are buttons which are not standard HTML buttons,
which is why JAWS will not recognize them.
Dave

----- Original Message -----
*From:* Glenn / Lenny <mailto:glenn@...>
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Sent:* Sunday, July 24, 2022 9:13 PM
*Subject:* Re: Routers which have an interface which is accessible
using JAWS

Hi Dave,
I use a Linksys Smart router, but I don't use any Linksys
software,
I use the web interface, and I find that Internet Explorer works
better than the three main browsers for router interface.
Glenn
----- Original Message -----
*From:* Dave Durber <mailto:d.durber@...>
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Sent:* Sunday, July 24, 2022 3:08 PM
*Subject:* Routers which have an interface which is accessible
using
JAWS

Hello everyone:
I need to set up port forwarding for a particular purpose. My ISP
provider, is EE. The router's interface is mostly accessible. I
was
able to choose the device from the list, enter the start and end
port forwarding addresses but, I could not find the button to
press,
which saves the new settings. I called EE and explained my
problem.
EE sent a technician to my home to try and help me set up the port
forwarding function, which is when we discovered there were a
couple
of buttons on the port forwarding page which had been designed as
graphics, which of course,no screen reader cannot speak.
Now, I am looking for a router, which has an interface, which is
accessible using JAWS. Until 2014, when Annie and I moved to the
UK,
we always had Lynksys routers. Are the modern day Lynksys routers
fully accessible using JAWS, if not, can any list members
recommend a router, which is accessible, using JAWS.
Any suggestions, must contain both make and model numbers.
Thank you in anticipation for any and all suggestions.
Dave Durberr














--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@...


moderated Re: Routers which have an interface which is accessible using JAWS

Richard B. McDonald
 

Hi Karen!

 

Soon, I am likely to get Spectrum cable Internet in California (Rancho Cucamonga).  I would probably have this same issue.  Could you please reply with the link to the Spectrum website where they list compatible routers?

 

Thanks!

Richard

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Karen Reynolds
Sent: Monday, July 25, 2022 6:40 AM
To: main@jfw.groups.io
Subject: Re: Routers which have an interface which is accessible using JAWS

 

Hi Dave,

We have that same issue with the router that came with Spectrum. The tech who came out suggested the Asus router that they list will work on their website with their equipment. You might want to find out which routers work with their equipment and then find out which one is accessible.

 

Karen

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Monday, July 25, 2022 4:09 AM
To: main@jfw.groups.io
Subject: Re: Routers which have an interface which is accessible using JAWS

 

Glenn:

 

I forgot to mention, The EE router, does have a web interface but, as I said before, there are buttons which are not standard HTML buttons, which is why JAWS will not recognize them.

 

Dave

 

----- Original Message -----

Sent: Sunday, July 24, 2022 9:13 PM

Subject: Re: Routers which have an interface which is accessible using JAWS

 

Hi Dave,

I use a Linksys Smart router, but I don't use any Linksys software, I use the web interface, and I find that Internet Explorer works better than the three main browsers for router interface.

Glenn

----- Original Message -----

Sent: Sunday, July 24, 2022 3:08 PM

Subject: Routers which have an interface which is accessible using JAWS

 

Hello everyone:

 

I need to set up port forwarding for a particular purpose. My ISP provider, is EE. The router's interface is mostly accessible. I was able to choose the device from the list, enter the start and end port forwarding addresses but, I could not find the button to press, which saves the new settings. I called EE and explained my problem. EE sent a technician to my home to try and help me set up the port forwarding function, which is when we discovered there were a couple of buttons on the port forwarding page which had been designed as graphics, which of course,no screen reader cannot speak.

 

Now, I am looking for a router, which has an interface, which is accessible using JAWS. Until 2014, when Annie and I moved to the UK, we always had Lynksys routers. Are the modern day Lynksys routers fully accessible using JAWS, if not, can any list members recommend a router, which is accessible, using JAWS.

 

Any suggestions, must contain both make and model numbers.

 

Thank you in anticipation for any and all suggestions.

 

Dave Durberr

 

 


moderated Re: Routers which have an interface which is accessible using JAWS

K0LNY
 

Dave, I'll see if I can find the model by logging into it.
I'll let you know.
Glenn

----- Original Message -----
Sent: Monday, July 25, 2022 3:05 AM
Subject: Re: Routers which have an interface which is accessible using JAWS

Glenn:
 
Do you happen to know if the router you have is still available? If it is, what is the model number?
 
Dave
 
----- Original Message -----
Sent: Sunday, July 24, 2022 9:13 PM
Subject: Re: Routers which have an interface which is accessible using JAWS

Hi Dave,
I use a Linksys Smart router, but I don't use any Linksys software, I use the web interface, and I find that Internet Explorer works better than the three main browsers for router interface.
Glenn
----- Original Message -----
Sent: Sunday, July 24, 2022 3:08 PM
Subject: Routers which have an interface which is accessible using JAWS

Hello everyone:
 
I need to set up port forwarding for a particular purpose. My ISP provider, is EE. The router's interface is mostly accessible. I was able to choose the device from the list, enter the start and end port forwarding addresses but, I could not find the button to press, which saves the new settings. I called EE and explained my problem. EE sent a technician to my home to try and help me set up the port forwarding function, which is when we discovered there were a couple of buttons on the port forwarding page which had been designed as graphics, which of course,no screen reader cannot speak.
 
Now, I am looking for a router, which has an interface, which is accessible using JAWS. Until 2014, when Annie and I moved to the UK, we always had Lynksys routers. Are the modern day Lynksys routers fully accessible using JAWS, if not, can any list members recommend a router, which is accessible, using JAWS.
 
Any suggestions, must contain both make and model numbers.
 
Thank you in anticipation for any and all suggestions.
 
Dave Durberr
 
 


moderated Re: Routers which have an interface which is accessible using JAWS

Karen Reynolds
 

Hi Dave,

We have that same issue with the router that came with Spectrum. The tech who came out suggested the Asus router that they list will work on their website with their equipment. You might want to find out which routers work with their equipment and then find out which one is accessible.

 

Karen

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Monday, July 25, 2022 4:09 AM
To: main@jfw.groups.io
Subject: Re: Routers which have an interface which is accessible using JAWS

 

Glenn:

 

I forgot to mention, The EE router, does have a web interface but, as I said before, there are buttons which are not standard HTML buttons, which is why JAWS will not recognize them.

 

Dave

 

----- Original Message -----

Sent: Sunday, July 24, 2022 9:13 PM

Subject: Re: Routers which have an interface which is accessible using JAWS

 

Hi Dave,

I use a Linksys Smart router, but I don't use any Linksys software, I use the web interface, and I find that Internet Explorer works better than the three main browsers for router interface.

Glenn

----- Original Message -----

Sent: Sunday, July 24, 2022 3:08 PM

Subject: Routers which have an interface which is accessible using JAWS

 

Hello everyone:

 

I need to set up port forwarding for a particular purpose. My ISP provider, is EE. The router's interface is mostly accessible. I was able to choose the device from the list, enter the start and end port forwarding addresses but, I could not find the button to press, which saves the new settings. I called EE and explained my problem. EE sent a technician to my home to try and help me set up the port forwarding function, which is when we discovered there were a couple of buttons on the port forwarding page which had been designed as graphics, which of course,no screen reader cannot speak.

 

Now, I am looking for a router, which has an interface, which is accessible using JAWS. Until 2014, when Annie and I moved to the UK, we always had Lynksys routers. Are the modern day Lynksys routers fully accessible using JAWS, if not, can any list members recommend a router, which is accessible, using JAWS.

 

Any suggestions, must contain both make and model numbers.

 

Thank you in anticipation for any and all suggestions.

 

Dave Durberr