Date   

Re: Outlook Issue

Marty Hutchings
 

OK, I see the links at the bottom of the messages.  I have just been hitting Control+R to respond.  Does this go out to the entire group, or just to the last person in the thread in the message on my computer?
 
Love in Christ
Marty
 

Sent: Monday, October 29, 2018 11:07 AM
Subject: Re: Outlook Issue
 
Marty,

           The Private button is present on the Groups.io web interface (on groups that allow private messaging) and appears directly below the compose box.  It allows you to send a response only to the individual whose message you're responding to.

           You can get the same effect in the e-mail interface using the "Reply to Sender" link at the bottom of each and every message that gets sent out by Groups.io, presuming you're not using plain text for your message format.
--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

  If you remove all the homosexuals and homosexual influences from what is generally regarded as American culture, you are pretty much left with Let's Make a Deal.

          ~ Fran Lebowitz


Re: OCR

Ed Legge <edward.legge@...>
 

Thanks.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Monday, October 29, 2018 12:45 PM
To: main@jfw.groups.io
Subject: Re: OCR

 

Ed,

 

If you have any questions on any of the layered commands, do the following:

 

JAWS+Spacebar

Then press the Question Mark Key

This will give you a general listing of layered commands and what they do

 

Or, JAWS+Spacebar

then press one of the layered commands such as O, H, etc.

then press the question mark key.

This will give you specific options for that layered command.

 

Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer

 

 

----- Original Message -----

From: Ed Legge

Sent: Monday, October 29, 2018 10:33

Subject: Re: OCR

 

Thanks.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Doering
Sent: Monday, October 29, 2018 12:30 PM
To: main@jfw.groups.io
Subject: Re: OCR

 

JAWS key plus space bar, then o, then d.

 

HTH,

 

 

 

John Doering

Administrative Pricing Asst 

 

p. 4147783040 Extn:4063  t. 800-642-8778

 

NOTICE: The information contained in this email and any document attached hereto is intended only for the named recipient(s). If you are not the intended recipient, nor the employee or agent responsible for delivering this message in confidence to the intended recipient(s), you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this transmittal or its attachments is strictly prohibited. If you have received this transmittal and/or attachments in error, please notify me immediately by reply e-mail and then delete this message, including any attachments.

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io>
Subject: OCR

 

What is the command for getting JAWS to read a PDF file with OCR?

 


Re: OCR

Dave...
 

Ed,
 
If you have any questions on any of the layered commands, do the following:
 
JAWS+Spacebar
Then press the Question Mark Key
This will give you a general listing of layered commands and what they do
 
Or, JAWS+Spacebar
then press one of the layered commands such as O, H, etc.
then press the question mark key.
This will give you specific options for that layered command.
 
Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer
 
 

----- Original Message -----
From: Ed Legge
Sent: Monday, October 29, 2018 10:33
Subject: Re: OCR

Thanks.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Doering
Sent: Monday, October 29, 2018 12:30 PM
To: main@jfw.groups.io
Subject: Re: OCR

 

JAWS key plus space bar, then o, then d.

 

HTH,

 

 

 

John Doering

Administrative Pricing Asst 

 

p. 4147783040 Extn:4063  t. 800-642-8778

 

NOTICE: The information contained in this email and any document attached hereto is intended only for the named recipient(s). If you are not the intended recipient, nor the employee or agent responsible for delivering this message in confidence to the intended recipient(s), you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this transmittal or its attachments is strictly prohibited. If you have received this transmittal and/or attachments in error, please notify me immediately by reply e-mail and then delete this message, including any attachments.

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io>
Subject: OCR

 

What is the command for getting JAWS to read a PDF file with OCR?

 


Re: OCR

Ed Legge <edward.legge@...>
 

Thanks.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Doering
Sent: Monday, October 29, 2018 12:30 PM
To: main@jfw.groups.io
Subject: Re: OCR

 

JAWS key plus space bar, then o, then d.

 

HTH,

 

 

 

John Doering

Administrative Pricing Asst 

 

p. 4147783040 Extn:4063  t. 800-642-8778

 

NOTICE: The information contained in this email and any document attached hereto is intended only for the named recipient(s). If you are not the intended recipient, nor the employee or agent responsible for delivering this message in confidence to the intended recipient(s), you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this transmittal or its attachments is strictly prohibited. If you have received this transmittal and/or attachments in error, please notify me immediately by reply e-mail and then delete this message, including any attachments.

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io>
Subject: OCR

 

What is the command for getting JAWS to read a PDF file with OCR?

 


Re: OCR

John Doering
 

JAWS key plus space bar, then o, then d.

 

HTH,

 

 

 

John Doering

Administrative Pricing Asst 

 
p. 4147783040 Extn:4063  t. 800-642-8778

 

NOTICE: The information contained in this email and any document attached hereto is intended only for the named recipient(s). If you are not the intended recipient, nor the employee or agent responsible for delivering this message in confidence to the intended recipient(s), you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this transmittal or its attachments is strictly prohibited. If you have received this transmittal and/or attachments in error, please notify me immediately by reply e-mail and then delete this message, including any attachments.

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ed Legge
Sent: Monday, October 29, 2018 12:31 PM
To: JAWS for window group <jfw@groups.io>
Subject: OCR

 

What is the command for getting JAWS to read a PDF file with OCR?

 


OCR

Ed Legge <edward.legge@...>
 

What is the command for getting JAWS to read a PDF file with OCR?

 


Re: Outlook Issue

 

Marty,

           The Private button is present on the Groups.io web interface (on groups that allow private messaging) and appears directly below the compose box.  It allows you to send a response only to the individual whose message you're responding to.

           You can get the same effect in the e-mail interface using the "Reply to Sender" link at the bottom of each and every message that gets sent out by Groups.io, presuming you're not using plain text for your message format.
--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

  If you remove all the homosexuals and homosexual influences from what is generally regarded as American culture, you are pretty much left with Let's Make a Deal.

          ~ Fran Lebowitz


FSCast 161, archive

Larry Gassman <larrygassman@...>
 

FSCast 161, archive of the October 2018 FSOpenLine

by <http://blog.freedomscientific.com/?author=7>Glen Gordon

The September edition of FSOpenLine, Freedom Scientific's global call-in show, keeps you informed of new developments and answers listener questions from around the world.

<http://traffic.libsyn.com/fscast/FSCast161_Archive_of_September_2018_Openline.mp3>Right click this link to save the podcast
<http://blog.freedomscientific.com/?author=7>Glen Gordon | October 29, 2018 at 8:37 am | Categories: <http://blog.freedomscientific.com/?taxonomy=category&term=fscast>FSCast | URL: <https://wp.me/p94NCs-44>https://wp.me/p94NCs-44


Re: Outlook Issue

Marty Hutchings
 

I didn’t know that there is a private button.  Please inform me.
 
Love in Christ
Marty
 

Sent: Monday, October 29, 2018 9:06 AM
Subject: Re: Outlook Issue
 
Sorry ladies and gentlemen other than Denise.  I failed to hit that "Private" button before hitting send.
--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

  If you remove all the homosexuals and homosexual influences from what is generally regarded as American culture, you are pretty much left with Let's Make a Deal.

          ~ Fran Lebowitz


Re: List request

Sieghard Weitzel <sieghard@...>
 

If you use Windows 10 you need to go to Settings > Apps > Default Apps and set Outlook as your default mail client.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of denise avant
Sent: Sunday, October 28, 2018 7:45 PM
To: main@jfw.groups.io
Subject: Re: List request

 

Hello,

I am replying to this thread only because I have been having trouble posting directly to the list using MS Outlook, though I have joined it. So, just as a test, I have clicked on the e-mail address for the group seen in some of the posts. When I do that, I am sent to Windows Mail,  not Outlook, which is my mail client. I can read the mail from the group in Outlook. So, I am wondering if it is not possible to actually send a post to this group using Outlook? I did e-mail the list moderator with no response.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Sunday, October 28, 2018 11:50 AM
To: main@jfw.groups.io
Subject: Re: List request

 

I agree with Richard, when I read messages I delete them when I read the message and if another person replies a day later referring to something but he does not have the thread in his message I found it is often unclear what this refers to. I guess in such a case I just also delete he message since I may not be able torespond not knowing the context, but while a long thread may not be always useful it doesn’t bother me since the new reply is at the top (if it isn’t then that is not my problem) so I don’t have to read the entire thread, but if I do want to refer back to something then I can or if I look for a link that was in a message 5 replies further down the thread then it is easy to find..

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shirley Tracy
Sent: Sunday, October 28, 2018 9:24 AM
To: main@jfw.groups.io
Subject: Re: List request

 

I think keeping the subject line clear and specific will help a lot, even if it needs to be changed/updated to fit a new thread from the original. Just my opinion.

 

Cheerfully,

 

Shirley Tracy

 

From: george b
Sent: Sunday, October 28, 2018 11:15 AM
To: main@jfw.groups.io
Subject: Re: List request

 

Thank you...i feel the same way how can we help if we do not know what your

asking about

 

-----Original Message-----

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner

Sent: October 28, 2018 8:13

To: JFW user list <main@jfw.groups.io>

Subject: List request

 

This is my Pet Peeve for the month:

Those of you, and there are several so I'm not pointing out anyone in

particular, on this list who have there email set to not quote the previous

message make it very difficult for those of us who want to help. If you do

not explain the context of your message, it often leaves me scratching my

head wondering what the heck the person is replying to.

So, please consider summarizing the answer you are replying to so we might

be able to offer a different suggestion, or set your email program to

include the prior message.

Just my thoughts. I often want to assist, but have no idea what the issue

is, so I simply delete the message.

Richard

 

 

 

 

 

 

"It is a great thing to start life with a small number of really good books

which are your very own." __  Sir Arthur Conan Doyle

 

 

 

 

 

 


Re: Outlook Issue

 

Sorry ladies and gentlemen other than Denise.  I failed to hit that "Private" button before hitting send.
--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

  If you remove all the homosexuals and homosexual influences from what is generally regarded as American culture, you are pretty much left with Let's Make a Deal.

          ~ Fran Lebowitz


Re: Outlook Issue

 

Denise,

          Based on what you've said on the JAWS list I am guessing you're a Windows 10 user and that somehow Outlook is not set as your default mail app.  Go into Settings, Apps, Default Apps pane, and find Email.  My guess is the button is going to read Mail (as in the Win10 Mail app) at the moment.  Activate it and select Outlook.  That should fix your issue.
--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

  If you remove all the homosexuals and homosexual influences from what is generally regarded as American culture, you are pretty much left with Let's Make a Deal.

          ~ Fran Lebowitz


Re: Braille edge:

Richard Turner <richardturner42@...>
 

Timothy,

That is the site that is broken.  The links to the actual file do not work and they still, after several weeks, have not even put the last version of the Braille Edge Firmware on their web site. 

I’m arranging with Charles to get him the file.

 

I do not work for HIMS but I work in the field.

 

Richard

 

 

“Definition of an expert: An ex is a has-been and a spirt is a drip under pressure.” – Bruce U. Utah Phillips

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Timothy Brunemeyer
Sent: Monday, October 29, 2018 5:01 AM
To: main@jfw.groups.io
Subject: Re: Braille edge:

 


On Oct 29, 2018, at 6:54 AM, charleseblack@... wrote:

Does anyone know where to get the driver for windows 10 and the hymn's braille edge? The site to get it is down as far as I can see. Thanks!

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jason White via Groups.Io
Sent: Sunday, October 28, 2018 6:13 PM
To: main@jfw.groups.io
Subject: Re: mailing list for persective elBraille users?

I'm unaware of any, but you can subscribe to the braille-display-users mailing list, where there are bound to be ElBraille users.
https://groups.io/g/braille-display-users

On 10/28/18, 13:24, "Jessica D" <main@jfw.groups.io on behalf of jldail13@...> wrote:

   Hello,

   I'm seriously thinking of purchasing an elBraille.
   Does anyone know of any mailing lists for the elBraille?

   Thanks,
   Jessica












Re: win pe

Jonas Voll
 

I use Vmware to test my boot media!

 

 

Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
www.envisionus.com

Envision: To improve the quality of life and provide inspiration and opportunity for people who are blind or visually impaired through employment, outreach, rehabilitation, education and research.


From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Nino Dagostino
Sent: Friday, October 26, 2018 2:27 PM
To: main@jfw.groups.io
Subject: win pe

 

Hello:

 

I downloaded the windows pe files.

 

I cant get the windows pe to load.

 

The cd trys to boot comes up with an error its some kind of a os error.

 

I have a dell xps8900 computer.

 

I am not sure where to start to fix this.

 

Any help would be appreciated.

 

 

 
SonicWall identified this message as clean.
To manage your junk mail go to https://nospam.envisionus.com 
and 
logon with your domain userid and password.
If you consider this email to be spam please forward it to 
'spam@...'

NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.



Re: Braille edge:

Timothy Brunemeyer
 

On Oct 29, 2018, at 6:54 AM, charleseblack@... wrote:

Does anyone know where to get the driver for windows 10 and the hymn's braille edge? The site to get it is down as far as I can see. Thanks!

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jason White via Groups.Io
Sent: Sunday, October 28, 2018 6:13 PM
To: main@jfw.groups.io
Subject: Re: mailing list for persective elBraille users?

I'm unaware of any, but you can subscribe to the braille-display-users mailing list, where there are bound to be ElBraille users.
https://groups.io/g/braille-display-users

On 10/28/18, 13:24, "Jessica D" <main@jfw.groups.io on behalf of jldail13@...> wrote:

   Hello,

   I'm seriously thinking of purchasing an elBraille.
   Does anyone know of any mailing lists for the elBraille?

   Thanks,
   Jessica













Re: List request

James Homuth
 

Hello,

 

It sounds like your Outlook isn’t set up properly. This message came through just fine, but the fact it wants to open it up in windows Mail tells me whoever actually set up Outlook only did part of the job. This would also explain why I never received your email.

 

James,

List Admin

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of denise avant
Sent: October-28-18 10:45 PM
To: main@jfw.groups.io
Subject: Re: List request

 

Hello,

I am replying to this thread only because I have been having trouble posting directly to the list using MS Outlook, though I have joined it. So, just as a test, I have clicked on the e-mail address for the group seen in some of the posts. When I do that, I am sent to Windows Mail,  not Outlook, which is my mail client. I can read the mail from the group in Outlook. So, I am wondering if it is not possible to actually send a post to this group using Outlook? I did e-mail the list moderator with no response.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Sunday, October 28, 2018 11:50 AM
To: main@jfw.groups.io
Subject: Re: List request

 

I agree with Richard, when I read messages I delete them when I read the message and if another person replies a day later referring to something but he does not have the thread in his message I found it is often unclear what this refers to. I guess in such a case I just also delete he message since I may not be able torespond not knowing the context, but while a long thread may not be always useful it doesn’t bother me since the new reply is at the top (if it isn’t then that is not my problem) so I don’t have to read the entire thread, but if I do want to refer back to something then I can or if I look for a link that was in a message 5 replies further down the thread then it is easy to find..

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shirley Tracy
Sent: Sunday, October 28, 2018 9:24 AM
To: main@jfw.groups.io
Subject: Re: List request

 

I think keeping the subject line clear and specific will help a lot, even if it needs to be changed/updated to fit a new thread from the original. Just my opinion.

 

Cheerfully,

 

Shirley Tracy

 

From: george b
Sent: Sunday, October 28, 2018 11:15 AM
To: main@jfw.groups.io
Subject: Re: List request

 

Thank you...i feel the same way how can we help if we do not know what your

asking about

 

-----Original Message-----

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner

Sent: October 28, 2018 8:13

To: JFW user list <main@jfw.groups.io>

Subject: List request

 

This is my Pet Peeve for the month:

Those of you, and there are several so I'm not pointing out anyone in

particular, on this list who have there email set to not quote the previous

message make it very difficult for those of us who want to help. If you do

not explain the context of your message, it often leaves me scratching my

head wondering what the heck the person is replying to.

So, please consider summarizing the answer you are replying to so we might

be able to offer a different suggestion, or set your email program to

include the prior message.

Just my thoughts. I often want to assist, but have no idea what the issue

is, so I simply delete the message.

Richard

 

 

 

 

 

 

"It is a great thing to start life with a small number of really good books

which are your very own." __  Sir Arthur Conan Doyle

 

 

 

 

 

 


Re: List request

denise avant <denise.avant@...>
 

Hello,

I am replying to this thread only because I have been having trouble posting directly to the list using MS Outlook, though I have joined it. So, just as a test, I have clicked on the e-mail address for the group seen in some of the posts. When I do that, I am sent to Windows Mail,  not Outlook, which is my mail client. I can read the mail from the group in Outlook. So, I am wondering if it is not possible to actually send a post to this group using Outlook? I did e-mail the list moderator with no response.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Sunday, October 28, 2018 11:50 AM
To: main@jfw.groups.io
Subject: Re: List request

 

I agree with Richard, when I read messages I delete them when I read the message and if another person replies a day later referring to something but he does not have the thread in his message I found it is often unclear what this refers to. I guess in such a case I just also delete he message since I may not be able torespond not knowing the context, but while a long thread may not be always useful it doesn’t bother me since the new reply is at the top (if it isn’t then that is not my problem) so I don’t have to read the entire thread, but if I do want to refer back to something then I can or if I look for a link that was in a message 5 replies further down the thread then it is easy to find..

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shirley Tracy
Sent: Sunday, October 28, 2018 9:24 AM
To: main@jfw.groups.io
Subject: Re: List request

 

I think keeping the subject line clear and specific will help a lot, even if it needs to be changed/updated to fit a new thread from the original. Just my opinion.

 

Cheerfully,

 

Shirley Tracy

 

From: george b
Sent: Sunday, October 28, 2018 11:15 AM
To: main@jfw.groups.io
Subject: Re: List request

 

Thank you...i feel the same way how can we help if we do not know what your

asking about

 

-----Original Message-----

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner

Sent: October 28, 2018 8:13

To: JFW user list <main@jfw.groups.io>

Subject: List request

 

This is my Pet Peeve for the month:

Those of you, and there are several so I'm not pointing out anyone in

particular, on this list who have there email set to not quote the previous

message make it very difficult for those of us who want to help. If you do

not explain the context of your message, it often leaves me scratching my

head wondering what the heck the person is replying to.

So, please consider summarizing the answer you are replying to so we might

be able to offer a different suggestion, or set your email program to

include the prior message.

Just my thoughts. I often want to assist, but have no idea what the issue

is, so I simply delete the message.

Richard

 

 

 

 

 

 

"It is a great thing to start life with a small number of really good books

which are your very own." __  Sir Arthur Conan Doyle

 

 

 

 

 

 


Re: List request

Larry Wayland
 

A man to that.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard
Turner
Sent: Sunday, October 28, 2018 10:13 AM
To: JFW user list
Subject: List request

This is my Pet Peeve for the month:
Those of you, and there are several so I'm not pointing out anyone in
particular, on this list who have there email set to not quote the previous
message make it very difficult for those of us who want to help. If you do
not explain the context of your message, it often leaves me scratching my
head wondering what the heck the person is replying to.
So, please consider summarizing the answer you are replying to so we might
be able to offer a different suggestion, or set your email program to
include the prior message.
Just my thoughts. I often want to assist, but have no idea what the issue
is, so I simply delete the message.
Richard






"It is a great thing to start life with a small number of really good books
which are your very own." __ Sir Arthur Conan Doyle


Braille edge:

charleseblack@...
 

Does anyone know where to get the driver for windows 10 and the hymn's braille edge? The site to get it is down as far as I can see. Thanks!

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jason White via Groups.Io
Sent: Sunday, October 28, 2018 6:13 PM
To: main@jfw.groups.io
Subject: Re: mailing list for persective elBraille users?

I'm unaware of any, but you can subscribe to the braille-display-users mailing list, where there are bound to be ElBraille users.
https://groups.io/g/braille-display-users

On 10/28/18, 13:24, "Jessica D" <main@jfw.groups.io on behalf of jldail13@gmail.com> wrote:

Hello,

I'm seriously thinking of purchasing an elBraille.
Does anyone know of any mailing lists for the elBraille?

Thanks,
Jessica


Re: List request

Hope Williamson <isepic@...>
 

Hi Richard, I always try to summarize what I’m responding to. Apparently I forgot once one day lol.