Date   

moderated Re: reading pdfs

Justin Williams
 

I've tried to type it in, search for it, and follow the links on the carol page.

 

Can't find it.

 

Justin

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kestrel Verlager
Sent: Thursday, June 2, 2022 8:06 AM
To: main@jfw.groups.io
Subject: Re: reading pdfs

 

 

If you have already gone through the Acrobat accessibility settings  setup, there is one more setting you should fix to ensure PDF documents are accessible with a screen reader, and that is turning off protected view. David Kingsbury covers this in his book _The Windows Screen Reader Primer_, which can be downloaded here

https://carroll.org/the-windows-screen-reader-primer/

 

I will add that there are a couple of other PDF accessibility issues with screen readers which David also discusses in his book, one of which is a reading order issue. If you have an issue where it sounds as if words are being smooshed together with no spaces between them, post again and I will explain about how to potentially fix that issue, also.

 

Here is the section heading and the instructions:

 

10.1.1

 

There is one more change to make. Disabling Protected view is absolutely crucial. Until you do this, you simply will not be able to read PDF’s with your screen reader. Steps are:

1.            Press Alt to open the menu, Right arrow once to the Edit menu, Up arrow to Preferences, and press Enter.

2.            This opens a categories list. Press S until you get to Security enhanced.

3.            Tab once to the Enable Protected view at startup checkbox and press the Spacebar to uncheck it.

4.            Tab to the OK button and press Enter.

5.            Pres Alt F4 to close Acrobat Reader and then reopen it. The application must be closed for this change to take effect.

 

Kestrell 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Justin Williams
Sent: Wednesday, June 1, 2022 6:00 PM
To: main@jfw.groups.io
Subject: reading pdfs

 

It just seems as if reading pdfs are hits and misses.

 

I've downloaded severaol, but can't read them all.

 

What methods can we use for this?

 

It seems as fi the methods change time and time again?

 

Even when I try the brosers, the books don's all work

Justin

 

 


moderated Re: reading pdfs

Justin Williams
 

I just tied to get to your book and was unable too.

 

Justin

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of David Kingsbury
Sent: Thursday, June 2, 2022 12:48 PM
To: main@jfw.groups.io
Subject: Re: reading pdfs

 

Hi,
As Kestrell and others have pointed out, you can run into various problems with PDF's. For best results generally, use Adobe Acrobat Reader rather than one of the browser PDF readers. And you can read about the vvarious issues encountered and how to deal with them in Chapter 10 of my book.
Regards,
David


moderated Re: Ongoing Quick Assist update issue

Bill White
 

Actually, I did. I always try to verrify procedures before I send them out. I'm sorry it didn't work for you.

Bill White

billwhite92701@...

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Hareth
Sent: Thursday, June 2, 2022 8:45 PM
To: main@jfw.groups.io
Subject: Re: Ongoing Quick Assist update issue

Hi,
Did you have any luck using it that way?
Because it doesn't work with me.
I've tried it a few days back, and after I read your e-mail gave it
another shot, no go.
BTW, checked if there is an update for the quick assist, already have
the latest one.
both narrator's scan modes off and on gives "no next edit, no previous
edit" bla bla with the "e" and "shift plus e"

On 6/3/22, Bill White <billwhite92701@...> wrote:
I just spoke with Microsoft, and for now, there is another temporary
solution to not being able to use the Quick Assist app with a screen
reader.
They told me that, with Narrator, it is usable with the following
instructions:

1. Quit whichever screen reader you have running, unless your screen reader
is Narrator.
2. Start Narrator with CONTROL plus WIN Key plus ENTER, unless Narrator is
already running.
3. Open Quick Assist with CONTROL plus Win Key plus Q
4. While holding down the Narrator Command Key (usually CAPSLOCK), press
the
Space Bar to start Scan Mode.
5. Press the letter E to navigate to the edit box where you would enter
your
code.
6. Press the Space Bar to enter forms mode.
7. Enter the code, and proceed as usual.

Bill White

billwhite92701@...







moderated Re: Ongoing Quick Assist update issue

Hareth
 

Hi,
Did you have any luck using it that way?
Because it doesn't work with me.
I've tried it a few days back, and after I read your e-mail gave it
another shot, no go.
BTW, checked if there is an update for the quick assist, already have
the latest one.
both narrator's scan modes off and on gives "no next edit, no previous
edit" bla bla with the "e" and "shift plus e"

On 6/3/22, Bill White <billwhite92701@...> wrote:
I just spoke with Microsoft, and for now, there is another temporary
solution to not being able to use the Quick Assist app with a screen
reader.
They told me that, with Narrator, it is usable with the following
instructions:

1. Quit whichever screen reader you have running, unless your screen reader
is Narrator.
2. Start Narrator with CONTROL plus WIN Key plus ENTER, unless Narrator is
already running.
3. Open Quick Assist with CONTROL plus Win Key plus Q
4. While holding down the Narrator Command Key (usually CAPSLOCK), press
the
Space Bar to start Scan Mode.
5. Press the letter E to navigate to the edit box where you would enter
your
code.
6. Press the Space Bar to enter forms mode.
7. Enter the code, and proceed as usual.

Bill White

billwhite92701@...







moderated Ongoing Quick Assist update issue

Bill White
 

I just spoke with Microsoft, and for now, there is another temporary solution to not being able to use the Quick Assist app with a screen reader. They told me that, with Narrator, it is usable with the following instructions:

 

1. Quit whichever screen reader you have running, unless your screen reader is Narrator.

2. Start Narrator with CONTROL plus WIN Key plus ENTER, unless Narrator is already running.

3. Open Quick Assist with CONTROL plus Win Key plus Q

4. While holding down the Narrator Command Key (usually CAPSLOCK), press the Space Bar to start Scan Mode.

5. Press the letter E to navigate to the edit box where you would enter your code.

6. Press the Space Bar to enter forms mode.

7. Enter the code, and proceed as usual.

 

Bill White

 

billwhite92701@...

 


moderated Re: This site can't provide a secure connectionwww.ziontemple.org uses an unsupported protocol.

Justin Williams
 

Okay, then.

 

I'll try edge.  But thank you for that explonation.

 

Justin

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Bill White
Sent: Thursday, June 2, 2022 5:34 PM
To: main@jfw.groups.io
Subject: Re: This site can't provide a secure connectionwww.ziontemple.org uses an unsupported protocol.

 

Hi, Justin. I get the same error as you, when I go to this site with Google Chrome. When I use Microsoft Edge, however, I get a different error. Here is a copy of the error I received with Microsoft Edge.

 

Error 1001

 Ray ID: 715349b1dd437c5c • 2022-06-02 21:30:01 UTC

DNS resolution error

What happened?

You've requested a page on a website (www.ziontemple.org) that is on the Cloudflare network. Cloudflare is currently unable to resolve your requested domain (www.ziontemple.org). There are two potential causes of this:

  • Most likely: if the owner just signed up for Cloudflare it can take a few minutes for the website's information to be distributed to our global network.
  • Less likely: something is wrong with this site's configuration. Usually this happens when accounts have been signed up with a partner organization (e.g., a hosting provider) and the provider's DNS fails.

 

I believe that this situation is more likely to be the second situation, and the DNS failed. You will have to wait until the server is reconfigured, or the DNS comes back online to find the domain.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Justin Williams
Sent: Thursday, June 2, 2022 2:27 PM
To: main@jfw.groups.io
Subject: This site can't provide a secure connectionwww.ziontemple.org uses an unsupported protocol.

 

This site can’t provide a secure connection

www.ziontemple.org uses an unsupported protocol.

ERR_SSL_VERSION_OR_CIPHER_MISMATCH

 

Is the error I'm getting. How do I solve this?

 

Thanks,

 

Justin


moderated Re: This site can't provide a secure connectionwww.ziontemple.org uses an unsupported protocol.

Bill White
 

Hi, Justin. I get the same error as you, when I go to this site with Google Chrome. When I use Microsoft Edge, however, I get a different error. Here is a copy of the error I received with Microsoft Edge.

 

Error 1001

 Ray ID: 715349b1dd437c5c • 2022-06-02 21:30:01 UTC

DNS resolution error

What happened?

You've requested a page on a website (www.ziontemple.org) that is on the Cloudflare network. Cloudflare is currently unable to resolve your requested domain (www.ziontemple.org). There are two potential causes of this:

  • Most likely: if the owner just signed up for Cloudflare it can take a few minutes for the website's information to be distributed to our global network.
  • Less likely: something is wrong with this site's configuration. Usually this happens when accounts have been signed up with a partner organization (e.g., a hosting provider) and the provider's DNS fails.

 

I believe that this situation is more likely to be the second situation, and the DNS failed. You will have to wait until the server is reconfigured, or the DNS comes back online to find the domain.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Justin Williams
Sent: Thursday, June 2, 2022 2:27 PM
To: main@jfw.groups.io
Subject: This site can't provide a secure connectionwww.ziontemple.org uses an unsupported protocol.

 

This site can’t provide a secure connection

www.ziontemple.org uses an unsupported protocol.

ERR_SSL_VERSION_OR_CIPHER_MISMATCH

 

Is the error I'm getting. How do I solve this?

 

Thanks,

 

Justin


moderated This site can't provide a secure connectionwww.ziontemple.org uses an unsupported protocol.

Justin Williams
 

This site can’t provide a secure connection

www.ziontemple.org uses an unsupported protocol.

ERR_SSL_VERSION_OR_CIPHER_MISMATCH

Is the error I'm getting. How do I solve this?

 

Thanks,

 

Justin


moderated Re: Question regarding the latest update to Quick Assist

Justin Williams
 

yes, please, that would be great.


On Thu, Jun 2, 2022 at 2:17 PM Cook, Steve via groups.io <Steve.Cook=sccb.sc.gov@groups.io> wrote:

Would you be willing to share the directions?

 

Steve Cook, CPM

SC Commission for the Blind

Assistive Technology Consultant

Newsline Administrator

1430 Confederate Avenue

Columbia, SC 29201

Office: (803) 898-8788

Cell: (803) 908-3856

E-Mail: steve.cook@...

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber via groups.io
Sent: Thursday, June 2, 2022 1:50 AM
To: main@jfw.groups.io
Subject: [External] Re: Question regarding the latest update to Quick Assist

 

Bill:

 

I called the Microsoft Disability Assistance line, and I got an amence stroke of luck, an got the same person who helped me on Monday. I asked him, if he would be so kind, as to write down the steps to set up Remote Desktop for both the computer in my house and my laptop.

 

While composing this email, I checked to see if I got any new emails. One of the new messages, was from the Microsoft representative, listing the step-by-step instructions, for setting up Remote Desktop on a remote device, whether it be a laptop, smart phone  or, tablet.

 

Now I am going to see if I can get it all to work.

 

Dave

 

----- Original Message -----

From: Bill White

Sent: Wednesday, June 1, 2022 10:18 PM

Subject: Re: Question regarding the latest update to Quick Assist

 

Hi, Dave. Until they actually get the update into public circulation, all Microsoft will be able to do is walk you through the process of setting up the remote between your PC and your laptop. Right now, they don't have any way of taking control of either computer to do the process for you. I really hope this Windows Assist problem gets sorted quickly.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Dave Durber
Sent: Wednesday, June 1, 2022 1:33 PM
To: main@jfw.groups.io
Subject: Re: Question regarding the latest update to Quick Assist

 

Hello Bill:

 

Thank you for the clarrification. I need to contact the Disability Advice team later, to help me set up remote, Desktop between my main PC at home and my laptop, for when I need to travel.

 

I have just tried to use Quick Assist, with the same result I reported to the list this mormning.

 

I have just got home from a very nice meal with a friend at a local pub. I need to have a couple cups of coffee, before I call Microsoft at about 11:00 PM, UK time, before I go to bed. I will let you know how I get on later.

 

Dave

 

----- Original Message -----

From: Bill White

Sent: Wednesday, June 1, 2022 6:07 PM

Subject: Re: Question regarding the latest update to Quick Assist

 

Hi, Dave. I just spoke with the Microsoft Disability Desk at 10:00 AM, Pacific Daylight Time. They told me that currently, the Quick Assist app is crashing for everyone. They told me that an update should be released by tomorrow that should fix both the crashing problem, and also the inaccessibility issue. I published a review on the Microsoft Store which delineates the issue, and states that Microsoft did not verrify that this app is accessible for screen readers before releasing it.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Dave Durber
Sent: Wednesday, June 1, 2022 1:24 AM
To: main@jfw.groups.io
Subject: Question regarding the latest update to Quick Assist

 

Hello Everyone:

 

An update on my initial posting!

 

All my systems are presently running the older version of Quick Assist.

 

Up to yesterday evening, when I opened Quick Assist on each of my computers, included in the update screen, there was a "Not Yet" button.

 

I have run Quick Assist on all the systems this morning, the "Not Yet" button, has disappeared.

 

It looks like Microsoft, are forcing users to update Quick Assist, regardless as to whether they wish to do so or not, even though Microsoft, kno the updated version of Quisk Assist is floored.

 

This now means, users cannot use the previous version of Quick Assist, if they need someone have access to there computer

 

Regardless as to whether screen readers users use the previous version of Quick Assist or the new version, as individuals who are visually impaired, in my opinion, we are  being right royally screwed by the arrogance of Microsoft.

 

Dave

 

 


moderated Re: Question regarding the latest update to Quick Assist

Cook, Steve
 

Would you be willing to share the directions?

 

Steve Cook, CPM

SC Commission for the Blind

Assistive Technology Consultant

Newsline Administrator

1430 Confederate Avenue

Columbia, SC 29201

Office: (803) 898-8788

Cell: (803) 908-3856

E-Mail: steve.cook@...

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber via groups.io
Sent: Thursday, June 2, 2022 1:50 AM
To: main@jfw.groups.io
Subject: [External] Re: Question regarding the latest update to Quick Assist

 

Bill:

 

I called the Microsoft Disability Assistance line, and I got an amence stroke of luck, an got the same person who helped me on Monday. I asked him, if he would be so kind, as to write down the steps to set up Remote Desktop for both the computer in my house and my laptop.

 

While composing this email, I checked to see if I got any new emails. One of the new messages, was from the Microsoft representative, listing the step-by-step instructions, for setting up Remote Desktop on a remote device, whether it be a laptop, smart phone  or, tablet.

 

Now I am going to see if I can get it all to work.

 

Dave

 

----- Original Message -----

From: Bill White

Sent: Wednesday, June 1, 2022 10:18 PM

Subject: Re: Question regarding the latest update to Quick Assist

 

Hi, Dave. Until they actually get the update into public circulation, all Microsoft will be able to do is walk you through the process of setting up the remote between your PC and your laptop. Right now, they don't have any way of taking control of either computer to do the process for you. I really hope this Windows Assist problem gets sorted quickly.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Dave Durber
Sent: Wednesday, June 1, 2022 1:33 PM
To: main@jfw.groups.io
Subject: Re: Question regarding the latest update to Quick Assist

 

Hello Bill:

 

Thank you for the clarrification. I need to contact the Disability Advice team later, to help me set up remote, Desktop between my main PC at home and my laptop, for when I need to travel.

 

I have just tried to use Quick Assist, with the same result I reported to the list this mormning.

 

I have just got home from a very nice meal with a friend at a local pub. I need to have a couple cups of coffee, before I call Microsoft at about 11:00 PM, UK time, before I go to bed. I will let you know how I get on later.

 

Dave

 

----- Original Message -----

From: Bill White

Sent: Wednesday, June 1, 2022 6:07 PM

Subject: Re: Question regarding the latest update to Quick Assist

 

Hi, Dave. I just spoke with the Microsoft Disability Desk at 10:00 AM, Pacific Daylight Time. They told me that currently, the Quick Assist app is crashing for everyone. They told me that an update should be released by tomorrow that should fix both the crashing problem, and also the inaccessibility issue. I published a review on the Microsoft Store which delineates the issue, and states that Microsoft did not verrify that this app is accessible for screen readers before releasing it.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Dave Durber
Sent: Wednesday, June 1, 2022 1:24 AM
To: main@jfw.groups.io
Subject: Question regarding the latest update to Quick Assist

 

Hello Everyone:

 

An update on my initial posting!

 

All my systems are presently running the older version of Quick Assist.

 

Up to yesterday evening, when I opened Quick Assist on each of my computers, included in the update screen, there was a "Not Yet" button.

 

I have run Quick Assist on all the systems this morning, the "Not Yet" button, has disappeared.

 

It looks like Microsoft, are forcing users to update Quick Assist, regardless as to whether they wish to do so or not, even though Microsoft, kno the updated version of Quisk Assist is floored.

 

This now means, users cannot use the previous version of Quick Assist, if they need someone have access to there computer

 

Regardless as to whether screen readers users use the previous version of Quick Assist or the new version, as individuals who are visually impaired, in my opinion, we are  being right royally screwed by the arrogance of Microsoft.

 

Dave

 

 


moderated Re: reading pdfs

Karen Reynolds
 

HI,
I find that even with using adobe Acrobat Reader that I still have to
play around with the accessibility settings with some pdf files.
Others I have given up on and arrow down to them in my documents and I
think it is either application key or right mouse button and arrow
down to OCR and let it run and open it in a document.

Karen

On 6/2/22, David Kingsbury <davidkingsbury77@...> wrote:
Hi,
As Kestrell and others have pointed out, you can run into various problems
with PDF's. For best results generally, use Adobe Acrobat Reader rather than
one of the browser PDF readers. And you can read about the vvarious issues
encountered and how to deal with them in Chapter 10 of my book.
Regards,
David






moderated Re: Need Instructions For Turning off Auto-numbering and Auto-lettering in Microsoft Word Documents And Outlook e-mails

Tom Behler
 

Thanks for these instructions, Bill.

 

Hopefully, they will benefit more than just me.

 

I’ll try them, and will let you know if I’m able to successfully turn off auto-numbering and lettering in both Word and Outlook.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Wednesday, June 1, 2022 11:41 PM
To: main@jfw.groups.io
Subject: Re: Need Instructions For Turning off Auto-numbering and Auto-lettering in Microsoft Word Documents And Outlook e-mails

 

Hi again, Tom. I found some more updated instructions for turning off AutoNumbering and AutoBulleting in Word:

 

Turn Off Autonumbering and Bulleting In Word

 

1. Open Word.

2. Press ALT plus F, Followed by T for Options.

3. Arrow down to Proofing.

4. Press ALT plus A for Autocorrect Options.

5. Press CONTROL plus TAB until you hear “Autoformat as you type tab”

6. TAB approximately seven times, until you hear “Apply as you type, Automatic bulleted lists check box”

7. If this check box is checked, press SPACE to uncheck it. This will turn off automatic bulleted lists.

8. TAB once, until you hear “Apply as you type, Automatic Numbered Lists check box”

9. If this check box is checked, press SPACE to uncheck it. This will turn off Automatic Numbered Lists.

10. TAB to OK, and press SPACE or ENTER.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Wednesday, June 1, 2022 7:50 PM
To: main@jfw.groups.io
Subject: Need Instructions For Turning off Auto-numbering and Auto-lettering in Microsoft Word Documents And Outlook e-mails

 

                                                            Hello, everyone.

 

Within the last day or so, I have noticed that auto-numbering and auto-lettering has gotten turned back on in Microsoft Word documents and Outlook e-mails.

 

I suspect this happened in an Office 365 update of some kind.

 

Why Microsoft has to mess with these sorts of settings in their updates is beyond me.

 

I prefer to do numbering and lettering manually, since that gives me more control in what I’m doing.

 

Anyway, if someone has an easy-to-follow set of instructions for disabling auto-numbering and lettering in MS Word documents and Outlook e-mails, I’d appreciate your sending them along.

 

I don’t know what else might have changed, but I’ll take things one step at a time.

 

I’m using Office 365 on a Windows 10 PC here.

 

Thank you!

 

Dr.  Tom Behler From Michigan

 

                             


moderated Re: reading pdfs

David Kingsbury
 

Hi,
As Kestrell and others have pointed out, you can run into various problems with PDF's. For best results generally, use Adobe Acrobat Reader rather than one of the browser PDF readers. And you can read about the vvarious issues encountered and how to deal with them in Chapter 10 of my book.
Regards,
David


moderated Re: Need Instructions For Turning off Auto-numbering and Auto-lettering in Microsoft Word Documents And Outlook e-mails

Marie Nelson
 

Thanks for great  directions.

Marie

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Wednesday, June 1, 2022 8:41 PM
To: main@jfw.groups.io
Subject: Re: Need Instructions For Turning off Auto-numbering and Auto-lettering in Microsoft Word Documents And Outlook e-mails

 

Hi again, Tom. I found some more updated instructions for turning off AutoNumbering and AutoBulleting in Word:

 

Turn Off Autonumbering and Bulleting In Word

 

1. Open Word.

2. Press ALT plus F, Followed by T for Options.

3. Arrow down to Proofing.

4. Press ALT plus A for Autocorrect Options.

5. Press CONTROL plus TAB until you hear “Autoformat as you type tab”

6. TAB approximately seven times, until you hear “Apply as you type, Automatic bulleted lists check box”

7. If this check box is checked, press SPACE to uncheck it. This will turn off automatic bulleted lists.

8. TAB once, until you hear “Apply as you type, Automatic Numbered Lists check box”

9. If this check box is checked, press SPACE to uncheck it. This will turn off Automatic Numbered Lists.

10. TAB to OK, and press SPACE or ENTER.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Wednesday, June 1, 2022 7:50 PM
To: main@jfw.groups.io
Subject: Need Instructions For Turning off Auto-numbering and Auto-lettering in Microsoft Word Documents And Outlook e-mails

 

                                                            Hello, everyone.

 

Within the last day or so, I have noticed that auto-numbering and auto-lettering has gotten turned back on in Microsoft Word documents and Outlook e-mails.

 

I suspect this happened in an Office 365 update of some kind.

 

Why Microsoft has to mess with these sorts of settings in their updates is beyond me.

 

I prefer to do numbering and lettering manually, since that gives me more control in what I’m doing.

 

Anyway, if someone has an easy-to-follow set of instructions for disabling auto-numbering and lettering in MS Word documents and Outlook e-mails, I’d appreciate your sending them along.

 

I don’t know what else might have changed, but I’ll take things one step at a time.

 

I’m using Office 365 on a Windows 10 PC here.

 

Thank you!

 

Dr.  Tom Behler From Michigan

 

                             


moderated Re: reading pdfs

Kestrel Verlager <kestrell@...>
 

 

If you have already gone through the Acrobat accessibility settings  setup, there is one more setting you should fix to ensure PDF documents are accessible with a screen reader, and that is turning off protected view. David Kingsbury covers this in his book _The Windows Screen Reader Primer_, which can be downloaded here

https://carroll.org/the-windows-screen-reader-primer/

 

I will add that there are a couple of other PDF accessibility issues with screen readers which David also discusses in his book, one of which is a reading order issue. If you have an issue where it sounds as if words are being smooshed together with no spaces between them, post again and I will explain about how to potentially fix that issue, also.

Here is the section heading and the instructions:

 

10.1.1

 

There is one more change to make. Disabling Protected view is absolutely crucial. Until you do this, you simply will not be able to read PDF’s with your screen reader. Steps are:

1.            Press Alt to open the menu, Right arrow once to the Edit menu, Up arrow to Preferences, and press Enter.

2.            This opens a categories list. Press S until you get to Security enhanced.

3.            Tab once to the Enable Protected view at startup checkbox and press the Spacebar to uncheck it.

4.            Tab to the OK button and press Enter.

5.            Pres Alt F4 to close Acrobat Reader and then reopen it. The application must be closed for this change to take effect.

 

Kestrell 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Justin Williams
Sent: Wednesday, June 1, 2022 6:00 PM
To: main@jfw.groups.io
Subject: reading pdfs

 

It just seems as if reading pdfs are hits and misses.

 

I've downloaded severaol, but can't read them all.

 

What methods can we use for this?

 

It seems as fi the methods change time and time again?

 

Even when I try the brosers, the books don's all work

Justin

 

 


moderated Re: Question regarding the latest update to Quick Assist

Dave Durber
 

Bill:
 
I called the Microsoft Disability Assistance line, and I got an amence stroke of luck, an got the same person who helped me on Monday. I asked him, if he would be so kind, as to write down the steps to set up Remote Desktop for both the computer in my house and my laptop.
 
While composing this email, I checked to see if I got any new emails. One of the new messages, was from the Microsoft representative, listing the step-by-step instructions, for setting up Remote Desktop on a remote device, whether it be a laptop, smart phone  or, tablet.
 
Now I am going to see if I can get it all to work.
 
Dave
 

----- Original Message -----
From: Bill White
Sent: Wednesday, June 1, 2022 10:18 PM
Subject: Re: Question regarding the latest update to Quick Assist

Hi, Dave. Until they actually get the update into public circulation, all Microsoft will be able to do is walk you through the process of setting up the remote between your PC and your laptop. Right now, they don't have any way of taking control of either computer to do the process for you. I really hope this Windows Assist problem gets sorted quickly.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Dave Durber
Sent: Wednesday, June 1, 2022 1:33 PM
To: main@jfw.groups.io
Subject: Re: Question regarding the latest update to Quick Assist

 

Hello Bill:

 

Thank you for the clarrification. I need to contact the Disability Advice team later, to help me set up remote, Desktop between my main PC at home and my laptop, for when I need to travel.

 

I have just tried to use Quick Assist, with the same result I reported to the list this mormning.

 

I have just got home from a very nice meal with a friend at a local pub. I need to have a couple cups of coffee, before I call Microsoft at about 11:00 PM, UK time, before I go to bed. I will let you know how I get on later.

 

Dave

 

----- Original Message -----

From: Bill White

Sent: Wednesday, June 1, 2022 6:07 PM

Subject: Re: Question regarding the latest update to Quick Assist

 

Hi, Dave. I just spoke with the Microsoft Disability Desk at 10:00 AM, Pacific Daylight Time. They told me that currently, the Quick Assist app is crashing for everyone. They told me that an update should be released by tomorrow that should fix both the crashing problem, and also the inaccessibility issue. I published a review on the Microsoft Store which delineates the issue, and states that Microsoft did not verrify that this app is accessible for screen readers before releasing it.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Dave Durber
Sent: Wednesday, June 1, 2022 1:24 AM
To: main@jfw.groups.io
Subject: Question regarding the latest update to Quick Assist

 

Hello Everyone:

 

An update on my initial posting!

 

All my systems are presently running the older version of Quick Assist.

 

Up to yesterday evening, when I opened Quick Assist on each of my computers, included in the update screen, there was a "Not Yet" button.

 

I have run Quick Assist on all the systems this morning, the "Not Yet" button, has disappeared.

 

It looks like Microsoft, are forcing users to update Quick Assist, regardless as to whether they wish to do so or not, even though Microsoft, kno the updated version of Quisk Assist is floored.

 

This now means, users cannot use the previous version of Quick Assist, if they need someone have access to there computer

 

Regardless as to whether screen readers users use the previous version of Quick Assist or the new version, as individuals who are visually impaired, in my opinion, we are  being right royally screwed by the arrogance of Microsoft.

 

Dave

 

 


moderated Re: Quick Assist Update

Dave Durber
 

Bill:
 
Thank you for your help.
 
I used the link you provided and went to the site.
 
I then pressed ENTER on the Quick Assist Link
 
I then got the prompt to enter the code provided by the person at the other end. How the code is provided to the individual who needs help, is a mystery.
 
It appears, this option is designed to get assistance from Microsoft. I did not see an option on the site, which allows, for example, you to connect with one of my systems, to help solve a problem with that system.
 
In Quick Assist, there is an option which allows an individual, to get help from another person/organization, other than Microsoft. Do you know How the code is generated to the person/organization to give to the individual who needs the assistance?
 
Dave
 

----- Original Message -----
From: Bill White
Sent: Thursday, June 2, 2022 12:48 AM
Subject: Quick Assist Update

There is a new, temporary solution to the Quick Assist inaccessibility dilemma. It is a web-based app, and is accessible. You may use Quick Assist at the following URL:

 

https://remoteassistance.support.services.microsoft.com/roleselection

 

Bill White

 

billwhite92701@...

 


moderated Re: Need Instructions For Turning off Auto-numbering and Auto-lettering in Microsoft Word Documents And Outlook e-mails

Bill White
 

Hi again, Tom. I found some more updated instructions for turning off AutoNumbering and AutoBulleting in Word:

 

Turn Off Autonumbering and Bulleting In Word

 

1. Open Word.

2. Press ALT plus F, Followed by T for Options.

3. Arrow down to Proofing.

4. Press ALT plus A for Autocorrect Options.

5. Press CONTROL plus TAB until you hear “Autoformat as you type tab”

6. TAB approximately seven times, until you hear “Apply as you type, Automatic bulleted lists check box”

7. If this check box is checked, press SPACE to uncheck it. This will turn off automatic bulleted lists.

8. TAB once, until you hear “Apply as you type, Automatic Numbered Lists check box”

9. If this check box is checked, press SPACE to uncheck it. This will turn off Automatic Numbered Lists.

10. TAB to OK, and press SPACE or ENTER.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Wednesday, June 1, 2022 7:50 PM
To: main@jfw.groups.io
Subject: Need Instructions For Turning off Auto-numbering and Auto-lettering in Microsoft Word Documents And Outlook e-mails

 

                                                            Hello, everyone.

 

Within the last day or so, I have noticed that auto-numbering and auto-lettering has gotten turned back on in Microsoft Word documents and Outlook e-mails.

 

I suspect this happened in an Office 365 update of some kind.

 

Why Microsoft has to mess with these sorts of settings in their updates is beyond me.

 

I prefer to do numbering and lettering manually, since that gives me more control in what I’m doing.

 

Anyway, if someone has an easy-to-follow set of instructions for disabling auto-numbering and lettering in MS Word documents and Outlook e-mails, I’d appreciate your sending them along.

 

I don’t know what else might have changed, but I’ll take things one step at a time.

 

I’m using Office 365 on a Windows 10 PC here.

 

Thank you!

 

Dr.  Tom Behler From Michigan

 

                             


moderated Re: Need Instructions For Turning off Auto-numbering and Auto-lettering in Microsoft Word Documents And Outlook e-mails

Bill White
 

Hi, Tom. Some of these procedures may have changed slightly in newer versions of Word and in Outlook, but you should be able to find and navigate the options from the instructions below.

 

How To Turn Off Automatic List Numbering And Bulleting in Word

 

1.  Start Word.

2.  Press Alt + T to enter the Tools Menu.

3.  Press Shift + Tab four times to reach AutoCorrect Options, then press Enter.

4.  Press Ctrl + Tab to reach the Replace As You Type List Box.

5.  Arrow up and down, checking or unchecking the desired items.

 

 

Turn Off Auto Bullet Or Numbering In Outlook

 

You can turn off auto bullet or numbering in Outlook as follows.

 

1. Open the Outlook Options dialog box, ALT plus F, followed by T.

2. Arrow down to Mail.

3. Tab over to, and press ENTER on the Editor Options button.

4. In the Editor Options dialog box, make sure Proofing is highlighted by arrowing to it.

5. Tab to, and press ENTER on the AutoCorrect Options button.

6. Press CONTROL plus TAB, until it says, AutoFormat As You Type.

7. uncheck AutoNumbering, and AutoBulleting.

8. Tab to, and press ENTER on the OK button.

9. Tab to, and press ENTER on the next OK button.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Wednesday, June 1, 2022 7:50 PM
To: main@jfw.groups.io
Subject: Need Instructions For Turning off Auto-numbering and Auto-lettering in Microsoft Word Documents And Outlook e-mails

 

                                                            Hello, everyone.

 

Within the last day or so, I have noticed that auto-numbering and auto-lettering has gotten turned back on in Microsoft Word documents and Outlook e-mails.

 

I suspect this happened in an Office 365 update of some kind.

 

Why Microsoft has to mess with these sorts of settings in their updates is beyond me.

 

I prefer to do numbering and lettering manually, since that gives me more control in what I’m doing.

 

Anyway, if someone has an easy-to-follow set of instructions for disabling auto-numbering and lettering in MS Word documents and Outlook e-mails, I’d appreciate your sending them along.

 

I don’t know what else might have changed, but I’ll take things one step at a time.

 

I’m using Office 365 on a Windows 10 PC here.

 

Thank you!

 

Dr.  Tom Behler From Michigan

 

                             


moderated Need Instructions For Turning off Auto-numbering and Auto-lettering in Microsoft Word Documents And Outlook e-mails

Tom Behler
 

                                                            Hello, everyone.

 

Within the last day or so, I have noticed that auto-numbering and auto-lettering has gotten turned back on in Microsoft Word documents and Outlook e-mails.

 

I suspect this happened in an Office 365 update of some kind.

 

Why Microsoft has to mess with these sorts of settings in their updates is beyond me.

 

I prefer to do numbering and lettering manually, since that gives me more control in what I’m doing.

 

Anyway, if someone has an easy-to-follow set of instructions for disabling auto-numbering and lettering in MS Word documents and Outlook e-mails, I’d appreciate your sending them along.

 

I don’t know what else might have changed, but I’ll take things one step at a time.

 

I’m using Office 365 on a Windows 10 PC here.

 

Thank you!

 

Dr.  Tom Behler From Michigan

 

                             

5341 - 5360 of 102584