Date   

moderated Re: Audio described movie web site.

Richard Turner
 

I have several listed on my web site: www.turner42.com

Look for the heading called Audio Description resources

 

 

 

 

 

Richard

Software means never having to say you're finished

 

Web site: www.turner42.com

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tim Ford
Sent: Sunday, June 13, 2021 3:10 PM
To: main@jfw.groups.io
Subject: Audio described movie web site.

 

Hello All,

 

My computer crashed, and I lost the information posted here a while back about a good audio description web site.  I had tried and liked the site.  Can someone give me that link again?  Boy, computer crashes are sure not fun.

 

Tim Ford

and


moderated Laragon

Robbie Curtis
 

Good Evening,


Have a question to see if any of you are having this issue. I am trying to access the menu for Laragon through the system tray. When I do, the menus are not showing or telling me which item I am arrowing to. It occasionally says submenu but cannot determine what's inside.


I am using windows 10 and JAWS 2021. Looking forward to any replies and suggestions.


moderated Re: brouser

 

On Sun, Jun 13, 2021 at 05:53 PM, Bill White wrote:
Chrome is good, too, but Microsoft wants to track you too much.
-
Seriously, if you think that Edge is worse than Chrome in terms of tracking and data mining, you need to do more reading.

Chrome is without equal when it comes to what it tracks and the profiles Google uses it to compile.

I use Chrome, but for very little.  If you (the generic you) are concerned about privacy then it makes sense to use a web browser focused on same like Brave, Vivaldi, or Epic along with a search engine that doesn't track like DuckDuckGo (and there are others).

Google is the data hoovering champion of the world, and Chrome is a huge part of that success.
--

Brian - Windows 10, 64-Bit, Version 21H1, Build 19043  

It is better to be hated for what you are than to be loved for what you are not.

           ~ André Gide


moderated Audio described movie web site.

Tim Ford
 

Hello All,

 

My computer crashed, and I lost the information posted here a while back about a good audio description web site.  I had tried and liked the site.  Can someone give me that link again?  Boy, computer crashes are sure not fun.

 

Tim Ford

and


moderated Re: brouser

meow meow
 

ok I found the link how to stop it but it would not work on maps

https://www.comparitech.com/blog/vpn-privacy/stop-google-apple-microsoft-tracking-location/



--------------------------------------------------
From: "Bill White" <billwhite92701@att.net>
Sent: Sunday, June 13, 2021 3:53 PM
To: <main@jfw.groups.io>
Subject: Re: brouser

Hi, Rosie. I agree with Kevin. Edge is good. Chrome is good, too, but Microsoft wants to track you too much. Firefox sometimes works on sites that don't work well with Chromium browsers, but Firefox can sometimes be a real pain in the patooti.

Bill White

billwhite92701@att.net

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of meow meow
Sent: Sunday, June 13, 2021 2:35 PM
To: main@jfw.groups.io
Subject: brouser


hi I am planning get new computer with window 10
I wonder which brouser u like best and easier to use

thanks so much Rosie












moderated Re: brouser

 

Also, in reality, as far as I'm concerned there are only two classes of browser:

1. Chromium-based browsers.  These include MS-Edge, Chrome, Brave, Vivaldi (which now has an e-mail client included in the browser in its latest release as an option), Epic, Torch, and others.

2. Non-Chromium Based Browsers.  Firefox being the most obvious of the lot.  And I have never used any non-Chromium browser other than Firefox for years.

Anyone comfortable with any one of the Chromium-based browsers should be able to slide, with ease, into one of the others.  But I always like to have Firefox, too, in case the sticking point is something in the Chromium code base that all the browsers built upon it share.
--

Brian - Windows 10, 64-Bit, Version 21H1, Build 19043  

It is better to be hated for what you are than to be loved for what you are not.

           ~ André Gide


moderated Re: brouser

meow meow
 

is there a way to have not have microsoft stop track onyone?
I hate someone to track on anyone
how can u tell if they tracing on us?
thanks Rosie


--------------------------------------------------
From: "Bill White" <billwhite92701@att.net>
Sent: Sunday, June 13, 2021 3:53 PM
To: <main@jfw.groups.io>
Subject: Re: brouser

Hi, Rosie. I agree with Kevin. Edge is good. Chrome is good, too, but Microsoft wants to track you too much. Firefox sometimes works on sites that don't work well with Chromium browsers, but Firefox can sometimes be a real pain in the patooti.

Bill White

billwhite92701@att.net

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of meow meow
Sent: Sunday, June 13, 2021 2:35 PM
To: main@jfw.groups.io
Subject: brouser


hi I am planning get new computer with window 10
I wonder which brouser u like best and easier to use

thanks so much Rosie












moderated Re: brouser

Bill White
 

Hi, Rosie. I agree with Kevin. Edge is good. Chrome is good, too, but Microsoft wants to track you too much. Firefox sometimes works on sites that don't work well with Chromium browsers, but Firefox can sometimes be a real pain in the patooti.

Bill White

billwhite92701@att.net

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of meow meow
Sent: Sunday, June 13, 2021 2:35 PM
To: main@jfw.groups.io
Subject: brouser


hi I am planning get new computer with window 10
I wonder which brouser u like best and easier to use

thanks so much Rosie


moderated Re: brouser

Kevin Minor
 

Hi Rosie.

I'm using Windows 10 on my laptop. If you asked me a couple of months ago, I would have said, without hesitation, Edge was it for me. I started a job in April, and they required Google Chrome. That browser works well also. Having more than one browser can come in handy, because some sites work better in one than another with JAWS. If you only want a single browser for your use, Edge does a good job, and it's part of Windows 10.

Hope this helps. I'm by no means a power user in this area, so others' opinions are welcome.

Have a blessed day and don't work too hard.

Kevin and Jilly

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of meow meow
Sent: Sunday, June 13, 2021 5:35 PM
To: main@jfw.groups.io
Subject: brouser


hi I am planning get new computer with window 10 I wonder which brouser u like best and easier to use

thanks so much Rosie


moderated brouser

meow meow
 

hi I am planning get new computer with window 10 I wonder which brouser u like best and easier to use

thanks so much Rosie


moderated Re: confirmation button won't work

Adrian Spratt
 

If these methods don’t work, try turning on the JAWS cursor, locating the button with that cursor, then pressing Jaws key+the PC key. This used to work often, but less so lately.

 

Then if that fails, try the touch cursor, shift-PC key and locating the button in case pressing enter works.

 

It crosses my mind that turning off JAWS and going with Narrator might be an option, but I’ve never tried it.

 

Little is more frustrating than going through an entire form, only for the last button not to work with a screenreader.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
Sent: Sunday, June 13, 2021 3:03 PM
To: main@jfw.groups.io
Subject: Re: confirmation button won't work

 

Have you tried using a different browser to see if the results are the same?  Also, after pressing spacebar or enter on the confirmation button try pressing, Insert + escape, to refresh / repaint the screen and see if that'll help.  I've found that on many websites the chromium browsers are slow to respond to key commands.

 

 

Stay safe & take care.  Mike.
Just once, I want a username and password prompt to say:  "Close Enough!"
 

----- Original Message -----

From: Judy

Sent: Sunday, June 13, 2021 11:36 AM

Subject: confirmation button won't work

 

Hi, all,  I am on a website trying to set up a date and time for a phone interview. I was able to choose the date, and then it gave a list of times available for that date. There is a definite button for each date to choose, but when I enter on the one I want it doesn’t confirm it. I’ve tried actually selecting it and pressing enter and a few other things but nothing works. Any help is appreciated in advance. Using win 10, jaws 2019. Judy & Libby


moderated Re: How can I stop JAWS speach being included in recordings using the latest version of Total Recorder ?

leonard morris
 

I have been using Total Recorder professional addition for fifteen years or mor and I got it to work without it recording the screen reader once. However, when I had to do a new install on another PC I could never get it to record properly again. So, if someone has a solution post it please! (smile) Having said that I found this information on the web regarding this specific issue.

http://www.totalrecorder.com/screen_readers.htm

If recording in Background recording mode is impossible or you have the Standard Edition of Total Recorder, then set Total Recorder to record in Software mode using the Total Recorder kernel-mode audio driver. For this:

Launch the installation of Total Recorder.
In the third step of the installation wizard (next to accepting the License Agreement) click Advanced... button.
In the Total Recorder driver dialog opened uncheck all options but Install kernel-mode virtual device driver. Hit OK.
Complete the installation. Then reboot.
Set a screen-reader to use directly your soundcard driver (not Total Recorder driver).

On 6/14/2021 2:34 AM, John Covici wrote:
One thing you might want to try is to go into the total recorder
settings and change the driver to only monitor the usb sound card -- I
may have the name of this option wrong, but that should fix your
problem.

On Sun, 13 Jun 2021 05:25:44 -0400,
Dave Durber wrote:
Soronel:

Under the JAWS Utilities > Sound Card Submenue, I have JAWS set
to use the on-board sound card., I have Windows set to have all
other audio use the USB sound card.

Before I installed the latest version of Total Recorder, and I
started recording from an online stream or, from an external
source, JAWS continued using the on-board sound card and
therefore was not included in the recording, which meant, for
example, I could monitor how much time had elapsed, since the
recording had started.

Dave

----- Original Message ----- From: "Soronel Haetir"
<soronel.haetir@gmail.com>
To: <main@jfw.groups.io>
Sent: Saturday, June 12, 2021 6:40 PM
Subject: Re: How can I stop JAWS speach being included in
recordings using the latest version of Total Recorder ?


Which sound card is total recorder actually set to use (check
regardless of what you had it set to prior to this update)?

If it's set to use the on-board audio it would not surprise me if it
selects some kind of exclusive mode forcing jaws onto the USB audio.
If this is indeed the case then setting total recorder to use the USB
audio should take care of your problem.

On 6/12/21, Dave Durber <d.durber@gmail.com> wrote:
Richard:

So far, I have been able to use Total Recorder, as is, without
any scripts.
I am not aware of any scripts for Total Recorder. If anyone knows of any
scripts, I would be very interested.

Dave

----- Original Message -----
From: Richard Turner
To: main@jfw.groups.io
Sent: Saturday, June 12, 2021 5:16 PM
Subject: Re: How can I stop JAWS speach being included in
recordings using
the latest version of Total Recorder ?


Well, first, it sounds like a note to both Jaws and Total
Recorder could
be in Order.

But, if you do not need Jaws talking while you are recording, you could
put it in speech on demand.

Ubt if you are used to being able to check things with jaws while it is
running, then it sounds like something changed on the programming side of
the world.

Is there a script for this program that could be updated if
you contacted
the script author?









Richard

Software means never having to say you're finished



Web site: www.turner42.com







From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Saturday, June 12, 2021 9:12 AM
To: main@jfw.groups.io
Subject: Re: How can I stop JAWS speach being included in
recordings using
the latest version of Total Recorder ?



Richard:



Before I start recording, JAWS speach is definitely using the on-board
sound card. When I press the Record button and start
recording, this is when
JAWS speach is routed through the USB sound card. When I press the Stop
Button, and stop recording, JAWS speach is again routed
through the on-board
sound card.



Dave



----- Original Message -----

From: Richard Turner

To: main@jfw.groups.io

Sent: Saturday, June 12, 2021 4:47 PM

Subject: Re: How can I stop JAWS speach being included in recordings
using the latest version of Total Recorder ?



I have not used Total Recorder, but have you opened the
Jaws menu with
insert=j and under utilities, Sound card, see if jaws is
indeed going to the
USB and reselecting the onboard soundcard?







Richard

Software means never having to say you're finished



Web site: www.turner42.com







From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
Dave Durber
Sent: Saturday, June 12, 2021 8:36 AM
To: main@jfw.groups.io
Subject: How can I stop JAWS speach being included in
recordings using
the latest version of Total Recorder ?



Hello Everyone:



I am using the latest update to JAWS 2021 and the system I
am referring
too, is up-to-date with Windows 10.



In addition to the on-board sound card, I am using a
Creative Labs Sound
Blaster USB sound card.



By default, I have JAWS using the on-board sound card and the rest of
the audio using the USB sound card.



Earlier today, I downloaded and installed the latest version of Total
Recorder. Prior to doing that, whenever I have updated Total
Recorder, JAWS
speach has never been included in any recording.



However, When I tried to record something, using the
latest version of
Total Recorder, JAWS speach is being routed through the USB
sound card and
therefore being included in the recording.



Has anyone else had this problem, if so, how did you stop JAWS speach
being included in your recordings?



Thank you in anticipation.



Dave Durber












--
Soronel Haetir
soronel.haetir@gmail.com








moderated Re: confirmation button won't work

Mike B.
 

Have you tried using a different browser to see if the results are the same?  Also, after pressing spacebar or enter on the confirmation button try pressing, Insert + escape, to refresh / repaint the screen and see if that'll help.  I've found that on many websites the chromium browsers are slow to respond to key commands.
 
 
Stay safe & take care.  Mike.
Just once, I want a username and password prompt to say:  "Close Enough!"
 

----- Original Message -----
From: Judy
Sent: Sunday, June 13, 2021 11:36 AM
Subject: confirmation button won't work

Hi, all,  I am on a website trying to set up a date and time for a phone interview. I was able to choose the date, and then it gave a list of times available for that date. There is a definite button for each date to choose, but when I enter on the one I want it doesn’t confirm it. I’ve tried actually selecting it and pressing enter and a few other things but nothing works. Any help is appreciated in advance. Using win 10, jaws 2019. Judy & Libby


moderated confirmation button won't work

Judy
 

Hi, all,  I am on a website trying to set up a date and time for a phone interview. I was able to choose the date, and then it gave a list of times available for that date. There is a definite button for each date to choose, but when I enter on the one I want it doesn’t confirm it. I’ve tried actually selecting it and pressing enter and a few other things but nothing works. Any help is appreciated in advance. Using win 10, jaws 2019. Judy & Libby


moderated Re: How can I stop JAWS speach being included in recordings using the latest version of Total Recorder ?

John Covici
 

One thing you might want to try is to go into the total recorder
settings and change the driver to only monitor the usb sound card -- I
may have the name of this option wrong, but that should fix your
problem.

On Sun, 13 Jun 2021 05:25:44 -0400,
Dave Durber wrote:

Soronel:

Under the JAWS Utilities > Sound Card Submenue, I have JAWS set
to use the on-board sound card., I have Windows set to have all
other audio use the USB sound card.

Before I installed the latest version of Total Recorder, and I
started recording from an online stream or, from an external
source, JAWS continued using the on-board sound card and
therefore was not included in the recording, which meant, for
example, I could monitor how much time had elapsed, since the
recording had started.

Dave

----- Original Message ----- From: "Soronel Haetir"
<soronel.haetir@gmail.com>
To: <main@jfw.groups.io>
Sent: Saturday, June 12, 2021 6:40 PM
Subject: Re: How can I stop JAWS speach being included in
recordings using the latest version of Total Recorder ?


Which sound card is total recorder actually set to use (check
regardless of what you had it set to prior to this update)?

If it's set to use the on-board audio it would not surprise me if it
selects some kind of exclusive mode forcing jaws onto the USB audio.
If this is indeed the case then setting total recorder to use the USB
audio should take care of your problem.

On 6/12/21, Dave Durber <d.durber@gmail.com> wrote:
Richard:

So far, I have been able to use Total Recorder, as is, without
any scripts.
I am not aware of any scripts for Total Recorder. If anyone knows of any
scripts, I would be very interested.

Dave

----- Original Message -----
From: Richard Turner
To: main@jfw.groups.io
Sent: Saturday, June 12, 2021 5:16 PM
Subject: Re: How can I stop JAWS speach being included in
recordings using
the latest version of Total Recorder ?


Well, first, it sounds like a note to both Jaws and Total
Recorder could
be in Order.

But, if you do not need Jaws talking while you are recording, you could
put it in speech on demand.

Ubt if you are used to being able to check things with jaws while it is
running, then it sounds like something changed on the programming side of
the world.

Is there a script for this program that could be updated if
you contacted
the script author?









Richard

Software means never having to say you're finished



Web site: www.turner42.com







From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Saturday, June 12, 2021 9:12 AM
To: main@jfw.groups.io
Subject: Re: How can I stop JAWS speach being included in
recordings using
the latest version of Total Recorder ?



Richard:



Before I start recording, JAWS speach is definitely using the on-board
sound card. When I press the Record button and start
recording, this is when
JAWS speach is routed through the USB sound card. When I press the Stop
Button, and stop recording, JAWS speach is again routed
through the on-board
sound card.



Dave



----- Original Message -----

From: Richard Turner

To: main@jfw.groups.io

Sent: Saturday, June 12, 2021 4:47 PM

Subject: Re: How can I stop JAWS speach being included in recordings
using the latest version of Total Recorder ?



I have not used Total Recorder, but have you opened the
Jaws menu with
insert=j and under utilities, Sound card, see if jaws is
indeed going to the
USB and reselecting the onboard soundcard?







Richard

Software means never having to say you're finished



Web site: www.turner42.com







From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
Dave Durber
Sent: Saturday, June 12, 2021 8:36 AM
To: main@jfw.groups.io
Subject: How can I stop JAWS speach being included in
recordings using
the latest version of Total Recorder ?



Hello Everyone:



I am using the latest update to JAWS 2021 and the system I
am referring
too, is up-to-date with Windows 10.



In addition to the on-board sound card, I am using a
Creative Labs Sound
Blaster USB sound card.



By default, I have JAWS using the on-board sound card and the rest of
the audio using the USB sound card.



Earlier today, I downloaded and installed the latest version of Total
Recorder. Prior to doing that, whenever I have updated Total
Recorder, JAWS
speach has never been included in any recording.



However, When I tried to record something, using the
latest version of
Total Recorder, JAWS speach is being routed through the USB
sound card and
therefore being included in the recording.



Has anyone else had this problem, if so, how did you stop JAWS speach
being included in your recordings?



Thank you in anticipation.



Dave Durber













--
Soronel Haetir
soronel.haetir@gmail.com








--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


moderated Re: Strange problem with Outlook and losing speech

Vaughn Brown
 

Hi, Glenn,

Thank you. I always learn new tricks from wise people such as you.

Kind regards,

Vaughn

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: Saturday, June 12, 2021 8:03 AM
To: main@jfw.groups.io
Subject: Re: Strange problem with Outlook and losing speech

Vaughn,
Is your outlook maximized?
Do windows + up arrow to maximize a window.
This often fixes problems like that.
Glenn
----- Original Message -----
From: "Vaughn Brown" <jazzdressage@gmail.com>
To: <main@jfw.groups.io>
Sent: Saturday, June 12, 2021 9:35 AM
Subject: Re: Strange problem with Outlook and losing speech


I am having a similar issue. When I arrow through the message pane
Jaws does not read the names or titles of the message. I have to hit
inscert up arrow to read but that seems to stop quickly before
switching to "read" and "unread" without telling me when the sender or
subject.

Any ideas? Tried repairing and defaulting Outlook and Office 360.

Kindly,

Vaughn

On 6/11/21, N K Shackelford <nance62lady@gmail.com> wrote:
Okay, I did both and found that Outlook is indeed set as the default, so
if
I get this again, I shall attempt to repair Office. I have 32-bit
Outlook.

Thanks,

Nance



N K Shackelford

===Walk on Faith And Trust In Love=== Michael Reid












moderated Re: Setting Up RSS Feeds

Tom Behler
 

I understand, Brian.

 

Now, I have to figure out how to get the right RSS Feed URL.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Vogel
Sent: Sunday, June 13, 2021 12:58 PM
To: main@jfw.groups.io
Subject: Re: Setting Up RSS Feeds

 

I don't see why those shouldn't work.  Personally, I find that method to be "the long way."  There is an Add item in the context menu for the RSS Feed entry in the Outlook Folder Tree and it pretty much walks you right through adding the feed URL that you have.

This is one of those, "It's not rocket science," sort of things.  More of a "fill in the blank with the correct RSS Feed URL" and hit OK.  (There may be a couple of more steps, but I don't want to fully configure an RSS Feed I don't want.)
--

Brian - Windows 10, 64-Bit, Version 21H1, Build 19043  

It is better to be hated for what you are than to be loved for what you are not.

           ~ André Gide


moderated Re: Setting Up RSS Feeds

 

I don't see why those shouldn't work.  Personally, I find that method to be "the long way."  There is an Add item in the context menu for the RSS Feed entry in the Outlook Folder Tree and it pretty much walks you right through adding the feed URL that you have.

This is one of those, "It's not rocket science," sort of things.  More of a "fill in the blank with the correct RSS Feed URL" and hit OK.  (There may be a couple of more steps, but I don't want to fully configure an RSS Feed I don't want.)
--

Brian - Windows 10, 64-Bit, Version 21H1, Build 19043  

It is better to be hated for what you are than to be loved for what you are not.

           ~ André Gide


moderated Re: Setting Up RSS Feeds

Tom Behler
 

Will do, Richard.

 

Also may check directly with the Weather Service office itself.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Sunday, June 13, 2021 12:54 PM
To: main@jfw.groups.io
Subject: Re: Setting Up RSS Feeds

 

Try a web search for national Weather Service Rss Feed.

 

 

Richard

Software means never having to say you're finished

 

Web site: www.turner42.com

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: Sunday, June 13, 2021 9:48 AM
To: main@jfw.groups.io
Subject: Re: Setting Up RSS Feeds

 

Brian:

 

When I put focus on the RSS feeds option and go to the context menu, I do find “add an RSS feed”.

 

I guess the next thing I have to figure out is how to get the RSS Feed address from the National Weather Service office web site.

 

Tom Behler

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Vogel
Sent: Sunday, June 13, 2021 12:34 PM
To: main@jfw.groups.io
Subject: Re: Setting Up RSS Feeds

 

Tom,

Can you first tell me what happens when you bring up the context menu when RSS Feeds has focus and is selected?  If you get the menu that includes Add a new RSS Feed as the third item (or at least that's the position in Outlook 2016) then we can go further.

If you don't have the RSS Feed address for the feed you want, you'll need to get that, too.
--

Brian - Windows 10, 64-Bit, Version 21H1, Build 19043  

It is better to be hated for what you are than to be loved for what you are not.

           ~ André Gide


moderated Re: Setting Up RSS Feeds

Richard Turner
 

Try a web search for national Weather Service Rss Feed.

 

 

Richard

Software means never having to say you're finished

 

Web site: www.turner42.com

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: Sunday, June 13, 2021 9:48 AM
To: main@jfw.groups.io
Subject: Re: Setting Up RSS Feeds

 

Brian:

 

When I put focus on the RSS feeds option and go to the context menu, I do find “add an RSS feed”.

 

I guess the next thing I have to figure out is how to get the RSS Feed address from the National Weather Service office web site.

 

Tom Behler

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Vogel
Sent: Sunday, June 13, 2021 12:34 PM
To: main@jfw.groups.io
Subject: Re: Setting Up RSS Feeds

 

Tom,

Can you first tell me what happens when you bring up the context menu when RSS Feeds has focus and is selected?  If you get the menu that includes Add a new RSS Feed as the third item (or at least that's the position in Outlook 2016) then we can go further.

If you don't have the RSS Feed address for the feed you want, you'll need to get that, too.
--

Brian - Windows 10, 64-Bit, Version 21H1, Build 19043  

It is better to be hated for what you are than to be loved for what you are not.

           ~ André Gide

1981 - 2000 of 92008