Date   

moderated Re: Checking battery status

Bill White
 

The keystroke for checking battery status is,

 

SHIFT plus JAWS Key plus B

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Michael Massey
Sent: Thursday, April 22, 2021 9:54 AM
To: jfw@groups.io
Subject: Checking battery status

 

Hi.  I had to purchase a newbattery for my H P laptop running the latest version of Jaws under Windows 10 pro edition.  The build number is 19,042.928.  I can’t remember how to check the battery status.  I am using the Stascom utility which announces the battery status every five percentage points when it is charging or discharging.  Jaws announced that the battery was low so I plugged the laptop in so the battery replacement will charge again.  Thanks. 


moderated Checking battery status

Michael Massey
 

Hi.  I had to purchase a newbattery for my H P laptop running the latest version of Jaws under Windows 10 pro edition.  The build number is 19,042.928.  I can’t remember how to check the battery status.  I am using the Stascom utility which announces the battery status every five percentage points when it is charging or discharging.  Jaws announced that the battery was low so I plugged the laptop in so the battery replacement will charge again.  Thanks. 


moderated Re: Raise/Lower hand meeting control in Zoom for Windows

Joyce Feinberg
 

Hi Bill,
If a cited participant wanted to raise or lower their own hand, they would go to the more area. Under more they have the opportunity to raise or lower their hand and I believe the options are now more to the top of the box. They can also do it under their own name with participants.


On Apr 22, 2021, at 12:06 PM, Bill White <billwhite92701@...> wrote:



Hi, Adrian. When in Zoom, there are two windows open. With JAWS, if I do JAWS key plus T for Title, one window just says Zoom. The other says Zoom Meeting. The window which says Zoom Meeting is usually the window in which meeting controls and shortcuts are operable. Right now, however, ALT plus Y doesn't work in either window. My question is, where is the actual meeting control that sighted persons click to raise and lower the hand. I understand that it is in the Participants panel, but I don't know exactly where it is. I have looked at this panel with JAWS, and don't see the Raise/Lower hand control here.

 

Thank you.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Adrian Spratt
Sent: Thursday, April 22, 2021 3:47 AM
To: main@jfw.groups.io
Subject: Re: Raise/Lower hand meeting control in Zoom for Windows

 

Good morning, Bill.

 

What I find distracting while on a Zoom call is that the application opens more than one window. My guess is that you need to be in the right window for alt-y to work or to find the alternative you’re seeking here.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Thursday, April 22, 2021 3:04 AM
To: JFW Mailing List <jfw@groups.io>
Subject: Raise/Lower hand meeting control in Zoom for Windows

 

Is there an easy way to find the Raise/Lower hand meeting control in the Participants panel using Zoom Meetings client for Windows? I know that the shortcut ALT+Y can be used. But is there an easy way using JAWS to navigate to the actual meeting control? Sometimes when using ALT+Y, I hear the error sound, as if ALT+Y is not focusing on the actual meeting control.

 

Thank you.

 

Bill White

 

billwhite92701@...

 


moderated Re: Raise/Lower hand meeting control in Zoom for Windows

Larry Gassman
 

This is supposed to be fixed with the next update.

Focus seems to be changing if you have downloaded the latest zoom update.

If you have try closing the participants window with the toggle, Alt Plus U,  then reopen it with the same keystroke and try pressing Alt Plus Y again.

Zoom is aware that they broke something and they say they will fix it.

Larry

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Thursday, April 22, 2021 9:07 AM
To: main@jfw.groups.io
Subject: Re: Raise/Lower hand meeting control in Zoom for Windows

 

Hi, Adrian. When in Zoom, there are two windows open. With JAWS, if I do JAWS key plus T for Title, one window just says Zoom. The other says Zoom Meeting. The window which says Zoom Meeting is usually the window in which meeting controls and shortcuts are operable. Right now, however, ALT plus Y doesn't work in either window. My question is, where is the actual meeting control that sighted persons click to raise and lower the hand. I understand that it is in the Participants panel, but I don't know exactly where it is. I have looked at this panel with JAWS, and don't see the Raise/Lower hand control here.

 

Thank you.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Adrian Spratt
Sent: Thursday, April 22, 2021 3:47 AM
To: main@jfw.groups.io
Subject: Re: Raise/Lower hand meeting control in Zoom for Windows

 

Good morning, Bill.

 

What I find distracting while on a Zoom call is that the application opens more than one window. My guess is that you need to be in the right window for alt-y to work or to find the alternative you’re seeking here.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Thursday, April 22, 2021 3:04 AM
To: JFW Mailing List <jfw@groups.io>
Subject: Raise/Lower hand meeting control in Zoom for Windows

 

Is there an easy way to find the Raise/Lower hand meeting control in the Participants panel using Zoom Meetings client for Windows? I know that the shortcut ALT+Y can be used. But is there an easy way using JAWS to navigate to the actual meeting control? Sometimes when using ALT+Y, I hear the error sound, as if ALT+Y is not focusing on the actual meeting control.

 

Thank you.

 

Bill White

 

billwhite92701@...

 


moderated Re: Raise/Lower hand meeting control in Zoom for Windows

Bill White
 

Hi, Adrian. When in Zoom, there are two windows open. With JAWS, if I do JAWS key plus T for Title, one window just says Zoom. The other says Zoom Meeting. The window which says Zoom Meeting is usually the window in which meeting controls and shortcuts are operable. Right now, however, ALT plus Y doesn't work in either window. My question is, where is the actual meeting control that sighted persons click to raise and lower the hand. I understand that it is in the Participants panel, but I don't know exactly where it is. I have looked at this panel with JAWS, and don't see the Raise/Lower hand control here.

 

Thank you.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Adrian Spratt
Sent: Thursday, April 22, 2021 3:47 AM
To: main@jfw.groups.io
Subject: Re: Raise/Lower hand meeting control in Zoom for Windows

 

Good morning, Bill.

 

What I find distracting while on a Zoom call is that the application opens more than one window. My guess is that you need to be in the right window for alt-y to work or to find the alternative you’re seeking here.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Thursday, April 22, 2021 3:04 AM
To: JFW Mailing List <jfw@groups.io>
Subject: Raise/Lower hand meeting control in Zoom for Windows

 

Is there an easy way to find the Raise/Lower hand meeting control in the Participants panel using Zoom Meetings client for Windows? I know that the shortcut ALT+Y can be used. But is there an easy way using JAWS to navigate to the actual meeting control? Sometimes when using ALT+Y, I hear the error sound, as if ALT+Y is not focusing on the actual meeting control.

 

Thank you.

 

Bill White

 

billwhite92701@...

 


moderated Re: Raise/Lower hand meeting control in Zoom for Windows

Mario
 

Takis, my sister has complained about the ding sound when pressing alt+a to mute/unmute. for curiosity sake, would you mind enlightening us to what those other annoyances would be?

-------- Original Message --------
From: Panagiotis Antonopoulos [mailto:pantonop2856@gmail.com]
Subject: Raise/Lower hand meeting control in Zoom for Windows
Date: Thursday, April 22, 2021, 8:03 AM
To: <main@jfw.groups.io>
Hi Adrian/Bill/all,

Since its last update, zoom seems to be in great mess, with the more crucial
the inability to use alt-y to have hands raised. We experienced that in a
course on teams, which is conducted via zoom. I have also found some other
annoying minor things, but hope all this will vanish soon.

Take care,

Takis



From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Adrian Spratt
Sent: ??µpt?, 22 ?p?????? 2021 13:47
To: main@jfw.groups.io
Subject: Re: Raise/Lower hand meeting control in Zoom for Windows



Good morning, Bill.



What I find distracting while on a Zoom call is that the application opens
more than one window. My guess is that you need to be in the right window
for alt-y to work or to find the alternative you’re seeking here.



From: main@jfw.groups.io <mailto:main@jfw.groups.io> <main@jfw.groups.io
<mailto:main@jfw.groups.io> > On Behalf Of Bill White
Sent: Thursday, April 22, 2021 3:04 AM
To: JFW Mailing List <jfw@groups.io <mailto:jfw@groups.io> >
Subject: Raise/Lower hand meeting control in Zoom for Windows



Is there an easy way to find the Raise/Lower hand meeting control in the
Participants panel using Zoom Meetings client for Windows? I know that the
shortcut ALT+Y can be used. But is there an easy way using JAWS to navigate
to the actual meeting control? Sometimes when using ALT+Y, I hear the error
sound, as if ALT+Y is not focusing on the actual meeting control.



Thank you.



Bill White



billwhite92701@att.net <mailto:billwhite92701@att.net>


moderated Re: Working with Excel worksheets and JAWS

 

You can do a say line after selecting rename and Jaws will say:

 

Sheet Tab Edit, Sheet1
Sheet1

 

You can then also use the arrow keys

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Chris Hill
Sent: Wednesday, April 21, 2021 2:38 PM
To: main@jfw.groups.io
Subject: Re: Working with Excel worksheets and JAWS

 

Rename works, but it doesn't give feedback.  Once activated, type in the new name and press enter.

 

 

On 4/21/2021 16:33, Marty Hutchings wrote:

Thank you very much.  This worked for adding a new sheet at the end of the list.  The Rename function in this menu doesn't seem to work though.

Love in Christ

Marty

On 4/21/2021 3:25 PM, Van Lant, Robin via groups.io wrote:

Your new favorite keystroke is Insert shift S.  This opens that context menu and allows you to do all those things for the given tab or to add a new tab.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Wednesday, April 21, 2021 12:44 PM
To: main@jfw.groups.io
Subject: Working with Excel worksheets and JAWS

 

WARNING: This email originated externally. Exercise caution. Think before clicking links or opening attachments.

 

I am using Windows 10, JAWS 2021 and Exscel 2016, which I just upgraded from Office 2007.  I can no longer get JAWS curser to read the line at the bottom of a spread sheet where the list of sheets is.  How do I copy a sheet and add it to the end of the sheets in a workbook.  I use to do this with the context menu and the JAWS curser.

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: Working with Excel worksheets and JAWS

 

It does, but you have to use the say line command or if you start typing immediately after selecting rename whatever sheet name is there will be replaced by what you type.

You can also press F6 followed by F2 to rename a sheet, F6 puts you on the tab for your current sheet and F2 brings up Rename

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Wednesday, April 21, 2021 2:34 PM
To: main@jfw.groups.io
Subject: Re: Working with Excel worksheets and JAWS

 

Thank you very much.  This worked for adding a new sheet at the end of the list.  The Rename function in this menu doesn't seem to work though.

Love in Christ

Marty

On 4/21/2021 3:25 PM, Van Lant, Robin via groups.io wrote:

Your new favorite keystroke is Insert shift S.  This opens that context menu and allows you to do all those things for the given tab or to add a new tab.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Wednesday, April 21, 2021 12:44 PM
To: main@jfw.groups.io
Subject: Working with Excel worksheets and JAWS

 

WARNING: This email originated externally. Exercise caution. Think before clicking links or opening attachments.

 

I am using Windows 10, JAWS 2021 and Exscel 2016, which I just upgraded from Office 2007.  I can no longer get JAWS curser to read the line at the bottom of a spread sheet where the list of sheets is.  How do I copy a sheet and add it to the end of the sheets in a workbook.  I use to do this with the context menu and the JAWS curser.

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: Working with Excel worksheets and JAWS

 

Thanks for that one, if you simply want to perform actions on the current sheet this is a good shortcut to know, still I also think F6 is useful if you want to go to your different sheets. Of course you can also do that by using Control + Page Dow or Page Up or by bringing up a listing of all your sheet with Alt + Shift + S, but I like the simplicity of the single key press and then being able to move to any of my sheets with the arrows and using application key to bring up the context menu. There are many ways to skin a cat in Excel.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via groups.io
Sent: Wednesday, April 21, 2021 1:25 PM
To: main@jfw.groups.io
Subject: Re: Working with Excel worksheets and JAWS

 

Your new favorite keystroke is Insert shift S.  This opens that context menu and allows you to do all those things for the given tab or to add a new tab.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Wednesday, April 21, 2021 12:44 PM
To: main@jfw.groups.io
Subject: Working with Excel worksheets and JAWS

 

WARNING: This email originated externally. Exercise caution. Think before clicking links or opening attachments.

 

I am using Windows 10, JAWS 2021 and Exscel 2016, which I just upgraded from Office 2007.  I can no longer get JAWS curser to read the line at the bottom of a spread sheet where the list of sheets is.  How do I copy a sheet and add it to the end of the sheets in a workbook.  I use to do this with the context menu and the JAWS curser.

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: Working with Excel worksheets and JAWS

 

The same way as before, just use F6 and it puts you into that bottom bar where your sheets are listed, you can arrow left and right to all the sheets in your workbook and perform any of the actions there with the context menu.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Wednesday, April 21, 2021 11:44 AM
To: main@jfw.groups.io
Subject: Working with Excel worksheets and JAWS

 

I am using Windows 10, JAWS 2021 and Exscel 2016, which I just upgraded from Office 2007.  I can no longer get JAWS curser to read the line at the bottom of a spread sheet where the list of sheets is.  How do I copy a sheet and add it to the end of the sheets in a workbook.  I use to do this with the context menu and the JAWS curser.


moderated Re: Working with Excel worksheets and JAWS .. rename

 

You can also press F6 which puts focus on the sheet tab at the bottom, then press application key and "R" for rename. The application menu here also allows you to insert sheets, delete them or copy/move them.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ann Byrne
Sent: Wednesday, April 21, 2021 5:27 PM
To: main@jfw.groups.io
Subject: Re: Working with Excel worksheets and JAWS .. rename

To rename a sheet, while in the sheet press alt+h, o, r.
At 04:33 PM 4/21/2021, you wrote:

Thank you very much. This worked for adding a new sheet at the end of
the list. The Rename function in this menu doesn't seem to work
though.

Love in Christ

Marty
On 4/21/2021 3:25 PM, Van Lant, Robin via groups.io wrote:
Your new favorite keystroke is Insert shift S. This opens that
context menu and allows you to do all those things for the given tab
or to add a new tab.
Â
Â
From:
<mailto:main@jfw.groups.io>main@jfw.groups.io
<mailto:main@jfw.groups.io><main@jfw.groups.io> On Behalf Of Marty
Hutchings
Sent: Wednesday, April 21, 2021 12:44 PM
To: <mailto:main@jfw.groups.io>main@jfw.groups.io
Subject: Working with Excel worksheets and JAWS Â

WARNING: This email originated externally.
Exercise caution. Think before clicking links or opening attachments.
Â
I am using Windows 10, JAWS 2021 and Exscel 2016, which I just
upgraded from Office 2007. I can no longer get JAWS curser to read
the line at the bottom of a spread sheet where the list of sheets is.Â
How do I copy a sheet and add it to the end of the sheets in a
workbook. I use to do this with the context menu and the JAWS curser.
This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. No
confidentiality or privilege is waived or lost as a result of any
transmission errors. If you are not the intended recipient, you are
strictly prohibited from disclosing, copying, distributing or using
any of this information.
If you have received this communication in error, please contact the
sender immediately and destroy the material in its entirety, whether
electronic or hard copy.

This communication is for informational purposes only, is not an
offer, solicitation, recommendation or commitment for any transaction
or to buy or sell any security or other financial product, and is not
intended as investment advice or as a confirmation of any transaction.
Any market price, indicative value, estimate, view, opinion, data or
other information herein is not warranted as to completeness or
accuracy, is subject to change without notice, and KeyBanc Capital
Markets Inc. accepts no liability for its use or to update or keep it
current. Any views or opinions are those of the individual sender, not
necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities
representative employed by or associated with KeyBanc Capital Markets
Inc.
Member FINRA/SIPC and may also represent KeyBank National Association
(“KeyBank N.A.â€&#65533;). Securities products and services are
offered by KeyBanc Capital Markets Inc. Banking products and services
are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or
services from Key send an e-mail to
<mailto:DNERequests@key.com>DNERequests@key.com
with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: How do I add a signature to an email message in outlook?

 

https://duckduckgo.com/?q=add+signature+to+outlook+email 

Pick the tutorial that best suits.
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

It is better to be hated for what you are than to be loved for what you are not.

           ~ André Gide


moderated Re: Raise/Lower hand meeting control in Zoom for Windows

Tom Behler
 

For what it’s worth, I find the same thing when trying to use the Alt A command for muting and unmuting your audio when in a Zoom meeting.

 

You have to have focus in the right window for the command to work consistently.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Adrian Spratt
Sent: Thursday, April 22, 2021 6:47 AM
To: main@jfw.groups.io
Subject: Re: Raise/Lower hand meeting control in Zoom for Windows

 

Good morning, Bill.

 

What I find distracting while on a Zoom call is that the application opens more than one window. My guess is that you need to be in the right window for alt-y to work or to find the alternative you’re seeking here.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Thursday, April 22, 2021 3:04 AM
To: JFW Mailing List <jfw@groups.io>
Subject: Raise/Lower hand meeting control in Zoom for Windows

 

Is there an easy way to find the Raise/Lower hand meeting control in the Participants panel using Zoom Meetings client for Windows? I know that the shortcut ALT+Y can be used. But is there an easy way using JAWS to navigate to the actual meeting control? Sometimes when using ALT+Y, I hear the error sound, as if ALT+Y is not focusing on the actual meeting control.

 

Thank you.

 

Bill White

 

billwhite92701@...

 


moderated Re: probilim with attachments

Dan Longmore
 

Hi, when do you have open the E mail use insert plus a and then application or right mouse key to save attachment. Under file menu you can also do save attachments.


On Apr 22, 2021, at 12:48 AM, Amir Shah <4amir.shah@...> wrote:



Hi guys I need some help opening attachment on the computer. I am using outlook and Jaws 2021  and the attachment is incribded when I push  inter to open the attachment it tells me that the file is not found  So how do I git around this. I will greatly appreciated  


moderated Re: probilim with attachments

Richard Turner
 

Try pressing f6 after opening when you get that message until you find something that says enable editing, or warning, files from the internet may be dangerous, etc.

 

Hit enable editing if you trust the source, but only if you are certain it is from a trusted source.

 

 

 

Richard

"The highest reward for a person's toil is not what they get for it, but what they become by it."

- John Ruskin, 1819-1900

 

Web site: www.turner42.com

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Amir Shah
Sent: Wednesday, April 21, 2021 9:49 PM
To: jfw@groups.io
Subject: probilim with attachments

 

Hi guys I need some help opening attachment on the computer. I am using outlook and Jaws 2021  and the attachment is incribded when I push  inter to open the attachment it tells me that the file is not found  So how do I git around this. I will greatly appreciated  


moderated Re: Raise/Lower hand meeting control in Zoom for Windows

Leo
 

This is a serious problem. I’ve been using Zoom for the last 8 months with Jaws 2020 and Jaws 2021, and this problem has persisted  since then. In my personal case though, this happens to me with different combination keys, such as alt plus r to record a meeting, or even alt plus a to open  / close my Microphone.

 

 

Best,

     Leo Bado.

 

"It seems to me that I will always be happy in the place where I am not." Paul Auster. "City of Glass"

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Thursday, April 22, 2021 1:04 AM
To: JFW Mailing List <jfw@groups.io>
Subject: Raise/Lower hand meeting control in Zoom for Windows

 

Is there an easy way to find the Raise/Lower hand meeting control in the Participants panel using Zoom Meetings client for Windows? I know that the shortcut ALT+Y can be used. But is there an easy way using JAWS to navigate to the actual meeting control? Sometimes when using ALT+Y, I hear the error sound, as if ALT+Y is not focusing on the actual meeting control.

 

Thank you.

 

Bill White

 

billwhite92701@...

 


moderated Re: Raise/Lower hand meeting control in Zoom for Windows

Panagiotis Antonopoulos
 

Hi Adrian/Bill/all,

Since its last update, zoom seems to be in great mess, with the more crucial the inability to use alt-y to have hands raised. We experienced that in a course on teams, which is conducted via zoom. I have also found some other annoying minor things, but hope all this will vanish soon.

                                                                Take care,

                                                Takis

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Adrian Spratt
Sent: Πέμπτη, 22 Απριλίου 2021 13:47
To: main@jfw.groups.io
Subject: Re: Raise/Lower hand meeting control in Zoom for Windows

 

Good morning, Bill.

 

What I find distracting while on a Zoom call is that the application opens more than one window. My guess is that you need to be in the right window for alt-y to work or to find the alternative you’re seeking here.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Thursday, April 22, 2021 3:04 AM
To: JFW Mailing List <jfw@groups.io>
Subject: Raise/Lower hand meeting control in Zoom for Windows

 

Is there an easy way to find the Raise/Lower hand meeting control in the Participants panel using Zoom Meetings client for Windows? I know that the shortcut ALT+Y can be used. But is there an easy way using JAWS to navigate to the actual meeting control? Sometimes when using ALT+Y, I hear the error sound, as if ALT+Y is not focusing on the actual meeting control.

 

Thank you.

 

Bill White

 

billwhite92701@...

 


moderated Re: Raise/Lower hand meeting control in Zoom for Windows

Adrian Spratt
 

Good morning, Bill.

 

What I find distracting while on a Zoom call is that the application opens more than one window. My guess is that you need to be in the right window for alt-y to work or to find the alternative you’re seeking here.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Thursday, April 22, 2021 3:04 AM
To: JFW Mailing List <jfw@groups.io>
Subject: Raise/Lower hand meeting control in Zoom for Windows

 

Is there an easy way to find the Raise/Lower hand meeting control in the Participants panel using Zoom Meetings client for Windows? I know that the shortcut ALT+Y can be used. But is there an easy way using JAWS to navigate to the actual meeting control? Sometimes when using ALT+Y, I hear the error sound, as if ALT+Y is not focusing on the actual meeting control.

 

Thank you.

 

Bill White

 

billwhite92701@...

 


moderated How do I add a signature to an email message in outlook?

mona
 

 

As the subject says, would like to add my saved signatures to my outgoing emails.  How Please?  Thanks.

 

Mona


moderated Raise/Lower hand meeting control in Zoom for Windows

Bill White
 

Is there an easy way to find the Raise/Lower hand meeting control in the Participants panel using Zoom Meetings client for Windows? I know that the shortcut ALT+Y can be used. But is there an easy way using JAWS to navigate to the actual meeting control? Sometimes when using ALT+Y, I hear the error sound, as if ALT+Y is not focusing on the actual meeting control.

 

Thank you.

 

Bill White

 

billwhite92701@...

 

3621 - 3640 of 92160