Date   

moderated Re: zoom equipment.

JM Casey
 

You can use any microphone or camera that works in Windows. So yeah, your internal mic and camera would be fine. That said if you care much about sound quality, most internal laptop mics are not great in my limited experience. Still, fine for zoom or whatever – consider something  better maybe if you are planning to do presentations.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: March 23, 2021 06:16 PM
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

I have a question, can I use the camera and internal micraphone that are on this laptop,  or do I need to buy external versions of both/either?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jason White via groups.io
Sent: March 23, 2021 5:10 PM
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

Yes, you should be able to change the Windows default sound device (input and output separately) in Sound settings using the combo boxes.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via groups.io
Sent: Tuesday, 23 March 2021 17:51
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

Marty,

I bought one of these USB sound card plug-ins a couple months ago and wonder if you can answer a question.  Currently, if I plug this dongle into the USB port, JAWS and Windows sounds immediately start going through the earbud I’ve attached to the dongle.  The same occurs if I plug a USB headset directly into the USB port.  This has been nice, as it allows me to quickly move to earbuds or the dongle on the fly if I receive a phone call or start a meeting on my computer.  My experience doesn’t align to your steps though, as it sounds like you were expecting me to have to manually route sounds to the USB sound card via JAWS utilities.  I guess I’m trying to sort out in my head, if I start messin with settings as you describe them to separate Windows & JAWS sounds into two different sound cards, Is it relatively easy to do on the fly?  That is, I normally listen to everyting through the laptop speakers.  If I’m on a web-meeting, I want everything to come through my USB earphones with a built in microphone.  If I’m on a webinar and want to multi-task or type notes, I want to separate JAWS and the other sounds so that I can focus more easily.  I just plugged my USB sound card in, then was able to use the JAWS utilities to move JAWS sounds back to the Windows sound card, leaving Windows souns in my earsbuds. That’s the opposite of what I’d want to happen, so I’m guessing I need to find sound settings in Windows to change that default behavior. 

 

Maybe the simplest thing is to hear what your experience is with using a sounds card for on the fly changes.

 

Robin

JAWS 2021, Windows 10, Office 365.

 

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Tuesday, March 23, 2021 10:02 AM
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

WARNING: This email originated externally. Exercise caution. Think before clicking links or opening attachments.

 

 

Yes,  For around $12 on Amazon, you can get a little USB dongle that has a microphone and headphone jack.  Just plug it into any USB port then after it installs, press JAWS key + J to get to the JAWS context menu.  Down Arrow to the Utilities Sub menu, Right Arrow and Down Arrow to Sound Cards Sub Menu.  Right arrow and Down Arrow to the new sound card and hit Enter to select it as your new JAWS sound card.  Be sure that you plug in an ear bud or head phones to the correct jack on the dongle, because  as soon as you hit enter on the sound card, JAWS will instantly switch to this device and stop coming through your speakers.  Now, you will only hear your windows sounds and Zoom participants in your speakers and only you will hear JAWS in your ear.  To adjust the volume of JAWS, you will need to go to the Windows Mixer.

Love in Christ
Marty
The Gospel is fully accessible to all.

 

Sent: Tuesday, March 23, 2021 1:31 AM

Subject: Re: zoom equipment.

 

Okay, I like that.

 

I knew I'd heard of some way of doing that?

 

So with the usb adapter, JaWS can't be heard by my zoom folks?  It can only be heard by me?

 

Justin

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marty Hutchings
Sent: Monday, March 22, 2021 4:45 PM
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

You could use a USB sound card adapter to run JAWS through.  You can also set up Zoom to be on mute until you need to speak then press the Space bar to speak and release to be muted.  Just use JAWS when you are muted.

 

Love in Christ
Marty
The Gospel is fully accessible to all.

 

Sent: Monday, March 22, 2021 3:36 PM

Subject: zoom equipment.

 

What do I have to buy in order to use jaws and zoom on my pc without people hearing jaws?

I'd like to use jaws without earphones and have people not hear jaws.

 

Thanks,

 

Justin

 

 

 

 

 

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: zoom equipment.

Marty Hutchings
 

Robin,  I do not do on the fly changes with my system as I have things set the way I want them for Zoom and regular computing needs.  My set up is on a desktop running Windows 7 and JAWS 21.  My JAWS runs through the built in sound card and my windows sounds and Zoom are running through a Sound Blaster card.
 
Love in Christ
Marty
The Gospel is fully accessible to all.
 

Sent: Tuesday, March 23, 2021 4:50 PM
Subject: Re: zoom equipment.
 

Marty,

I bought one of these USB sound card plug-ins a couple months ago and wonder if you can answer a question.  Currently, if I plug this dongle into the USB port, JAWS and Windows sounds immediately start going through the earbud I’ve attached to the dongle.  The same occurs if I plug a USB headset directly into the USB port.  This has been nice, as it allows me to quickly move to earbuds or the dongle on the fly if I receive a phone call or start a meeting on my computer.  My experience doesn’t align to your steps though, as it sounds like you were expecting me to have to manually route sounds to the USB sound card via JAWS utilities.  I guess I’m trying to sort out in my head, if I start messin with settings as you describe them to separate Windows & JAWS sounds into two different sound cards, Is it relatively easy to do on the fly?  That is, I normally listen to everyting through the laptop speakers.  If I’m on a web-meeting, I want everything to come through my USB earphones with a built in microphone.  If I’m on a webinar and want to multi-task or type notes, I want to separate JAWS and the other sounds so that I can focus more easily.  I just plugged my USB sound card in, then was able to use the JAWS utilities to move JAWS sounds back to the Windows sound card, leaving Windows souns in my earsbuds. That’s the opposite of what I’d want to happen, so I’m guessing I need to find sound settings in Windows to change that default behavior. 

 

Maybe the simplest thing is to hear what your experience is with using a sounds card for on the fly changes.

 

Robin

JAWS 2021, Windows 10, Office 365.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Tuesday, March 23, 2021 10:02 AM
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

WARNING: This email originated externally. Exercise caution. Think before clicking links or opening attachments.

 

 

Yes,  For around $12 on Amazon, you can get a little USB dongle that has a microphone and headphone jack.  Just plug it into any USB port then after it installs, press JAWS key + J to get to the JAWS context menu.  Down Arrow to the Utilities Sub menu, Right Arrow and Down Arrow to Sound Cards Sub Menu.  Right arrow and Down Arrow to the new sound card and hit Enter to select it as your new JAWS sound card.  Be sure that you plug in an ear bud or head phones to the correct jack on the dongle, because  as soon as you hit enter on the sound card, JAWS will instantly switch to this device and stop coming through your speakers.  Now, you will only hear your windows sounds and Zoom participants in your speakers and only you will hear JAWS in your ear.  To adjust the volume of JAWS, you will need to go to the Windows Mixer.

Love in Christ
Marty
The Gospel is fully accessible to all.

 

Sent: Tuesday, March 23, 2021 1:31 AM

Subject: Re: zoom equipment.

 

Okay, I like that.

 

I knew I'd heard of some way of doing that?

 

So with the usb adapter, JaWS can't be heard by my zoom folks?  It can only be heard by me?

 

Justin

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marty Hutchings
Sent: Monday, March 22, 2021 4:45 PM
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

You could use a USB sound card adapter to run JAWS through.  You can also set up Zoom to be on mute until you need to speak then press the Space bar to speak and release to be muted.  Just use JAWS when you are muted.

 

Love in Christ
Marty
The Gospel is fully accessible to all.

 

Sent: Monday, March 22, 2021 3:36 PM

Subject: zoom equipment.

 

What do I have to buy in order to use jaws and zoom on my pc without people hearing jaws?

I'd like to use jaws without earphones and have people not hear jaws.

 

Thanks,

 

Justin

 

 

 

 

 

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: zoom equipment.

Madison Martin
 

I have a question, can I use the camera and internal micraphone that are on this laptop,  or do I need to buy external versions of both/either?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jason White via groups.io
Sent: March 23, 2021 5:10 PM
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

Yes, you should be able to change the Windows default sound device (input and output separately) in Sound settings using the combo boxes.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via groups.io
Sent: Tuesday, 23 March 2021 17:51
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

Marty,

I bought one of these USB sound card plug-ins a couple months ago and wonder if you can answer a question.  Currently, if I plug this dongle into the USB port, JAWS and Windows sounds immediately start going through the earbud I’ve attached to the dongle.  The same occurs if I plug a USB headset directly into the USB port.  This has been nice, as it allows me to quickly move to earbuds or the dongle on the fly if I receive a phone call or start a meeting on my computer.  My experience doesn’t align to your steps though, as it sounds like you were expecting me to have to manually route sounds to the USB sound card via JAWS utilities.  I guess I’m trying to sort out in my head, if I start messin with settings as you describe them to separate Windows & JAWS sounds into two different sound cards, Is it relatively easy to do on the fly?  That is, I normally listen to everyting through the laptop speakers.  If I’m on a web-meeting, I want everything to come through my USB earphones with a built in microphone.  If I’m on a webinar and want to multi-task or type notes, I want to separate JAWS and the other sounds so that I can focus more easily.  I just plugged my USB sound card in, then was able to use the JAWS utilities to move JAWS sounds back to the Windows sound card, leaving Windows souns in my earsbuds. That’s the opposite of what I’d want to happen, so I’m guessing I need to find sound settings in Windows to change that default behavior. 

 

Maybe the simplest thing is to hear what your experience is with using a sounds card for on the fly changes.

 

Robin

JAWS 2021, Windows 10, Office 365.

 

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Tuesday, March 23, 2021 10:02 AM
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

WARNING: This email originated externally. Exercise caution. Think before clicking links or opening attachments.

 

 

Yes,  For around $12 on Amazon, you can get a little USB dongle that has a microphone and headphone jack.  Just plug it into any USB port then after it installs, press JAWS key + J to get to the JAWS context menu.  Down Arrow to the Utilities Sub menu, Right Arrow and Down Arrow to Sound Cards Sub Menu.  Right arrow and Down Arrow to the new sound card and hit Enter to select it as your new JAWS sound card.  Be sure that you plug in an ear bud or head phones to the correct jack on the dongle, because  as soon as you hit enter on the sound card, JAWS will instantly switch to this device and stop coming through your speakers.  Now, you will only hear your windows sounds and Zoom participants in your speakers and only you will hear JAWS in your ear.  To adjust the volume of JAWS, you will need to go to the Windows Mixer.

Love in Christ
Marty
The Gospel is fully accessible to all.

 

Sent: Tuesday, March 23, 2021 1:31 AM

Subject: Re: zoom equipment.

 

Okay, I like that.

 

I knew I'd heard of some way of doing that?

 

So with the usb adapter, JaWS can't be heard by my zoom folks?  It can only be heard by me?

 

Justin

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marty Hutchings
Sent: Monday, March 22, 2021 4:45 PM
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

You could use a USB sound card adapter to run JAWS through.  You can also set up Zoom to be on mute until you need to speak then press the Space bar to speak and release to be muted.  Just use JAWS when you are muted.

 

Love in Christ
Marty
The Gospel is fully accessible to all.

 

Sent: Monday, March 22, 2021 3:36 PM

Subject: zoom equipment.

 

What do I have to buy in order to use jaws and zoom on my pc without people hearing jaws?

I'd like to use jaws without earphones and have people not hear jaws.

 

Thanks,

 

Justin

 

 

 

 

 

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: zoom equipment.

Jason White
 

Yes, you should be able to change the Windows default sound device (input and output separately) in Sound settings using the combo boxes.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via groups.io
Sent: Tuesday, 23 March 2021 17:51
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

Marty,

I bought one of these USB sound card plug-ins a couple months ago and wonder if you can answer a question.  Currently, if I plug this dongle into the USB port, JAWS and Windows sounds immediately start going through the earbud I’ve attached to the dongle.  The same occurs if I plug a USB headset directly into the USB port.  This has been nice, as it allows me to quickly move to earbuds or the dongle on the fly if I receive a phone call or start a meeting on my computer.  My experience doesn’t align to your steps though, as it sounds like you were expecting me to have to manually route sounds to the USB sound card via JAWS utilities.  I guess I’m trying to sort out in my head, if I start messin with settings as you describe them to separate Windows & JAWS sounds into two different sound cards, Is it relatively easy to do on the fly?  That is, I normally listen to everyting through the laptop speakers.  If I’m on a web-meeting, I want everything to come through my USB earphones with a built in microphone.  If I’m on a webinar and want to multi-task or type notes, I want to separate JAWS and the other sounds so that I can focus more easily.  I just plugged my USB sound card in, then was able to use the JAWS utilities to move JAWS sounds back to the Windows sound card, leaving Windows souns in my earsbuds. That’s the opposite of what I’d want to happen, so I’m guessing I need to find sound settings in Windows to change that default behavior. 

 

Maybe the simplest thing is to hear what your experience is with using a sounds card for on the fly changes.

 

Robin

JAWS 2021, Windows 10, Office 365.

 

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Tuesday, March 23, 2021 10:02 AM
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

WARNING: This email originated externally. Exercise caution. Think before clicking links or opening attachments.

 

 

Yes,  For around $12 on Amazon, you can get a little USB dongle that has a microphone and headphone jack.  Just plug it into any USB port then after it installs, press JAWS key + J to get to the JAWS context menu.  Down Arrow to the Utilities Sub menu, Right Arrow and Down Arrow to Sound Cards Sub Menu.  Right arrow and Down Arrow to the new sound card and hit Enter to select it as your new JAWS sound card.  Be sure that you plug in an ear bud or head phones to the correct jack on the dongle, because  as soon as you hit enter on the sound card, JAWS will instantly switch to this device and stop coming through your speakers.  Now, you will only hear your windows sounds and Zoom participants in your speakers and only you will hear JAWS in your ear.  To adjust the volume of JAWS, you will need to go to the Windows Mixer.

Love in Christ
Marty
The Gospel is fully accessible to all.

 

Sent: Tuesday, March 23, 2021 1:31 AM

Subject: Re: zoom equipment.

 

Okay, I like that.

 

I knew I'd heard of some way of doing that?

 

So with the usb adapter, JaWS can't be heard by my zoom folks?  It can only be heard by me?

 

Justin

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marty Hutchings
Sent: Monday, March 22, 2021 4:45 PM
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

You could use a USB sound card adapter to run JAWS through.  You can also set up Zoom to be on mute until you need to speak then press the Space bar to speak and release to be muted.  Just use JAWS when you are muted.

 

Love in Christ
Marty
The Gospel is fully accessible to all.

 

Sent: Monday, March 22, 2021 3:36 PM

Subject: zoom equipment.

 

What do I have to buy in order to use jaws and zoom on my pc without people hearing jaws?

I'd like to use jaws without earphones and have people not hear jaws.

 

Thanks,

 

Justin

 

 

 

 

 

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: zoom equipment.

Van Lant, Robin
 

Marty,

I bought one of these USB sound card plug-ins a couple months ago and wonder if you can answer a question.  Currently, if I plug this dongle into the USB port, JAWS and Windows sounds immediately start going through the earbud I’ve attached to the dongle.  The same occurs if I plug a USB headset directly into the USB port.  This has been nice, as it allows me to quickly move to earbuds or the dongle on the fly if I receive a phone call or start a meeting on my computer.  My experience doesn’t align to your steps though, as it sounds like you were expecting me to have to manually route sounds to the USB sound card via JAWS utilities.  I guess I’m trying to sort out in my head, if I start messin with settings as you describe them to separate Windows & JAWS sounds into two different sound cards, Is it relatively easy to do on the fly?  That is, I normally listen to everyting through the laptop speakers.  If I’m on a web-meeting, I want everything to come through my USB earphones with a built in microphone.  If I’m on a webinar and want to multi-task or type notes, I want to separate JAWS and the other sounds so that I can focus more easily.  I just plugged my USB sound card in, then was able to use the JAWS utilities to move JAWS sounds back to the Windows sound card, leaving Windows souns in my earsbuds. That’s the opposite of what I’d want to happen, so I’m guessing I need to find sound settings in Windows to change that default behavior. 

 

Maybe the simplest thing is to hear what your experience is with using a sounds card for on the fly changes.

 

Robin

JAWS 2021, Windows 10, Office 365.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Tuesday, March 23, 2021 10:02 AM
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

WARNING: This email originated externally. Exercise caution. Think before clicking links or opening attachments.

 

 

Yes,  For around $12 on Amazon, you can get a little USB dongle that has a microphone and headphone jack.  Just plug it into any USB port then after it installs, press JAWS key + J to get to the JAWS context menu.  Down Arrow to the Utilities Sub menu, Right Arrow and Down Arrow to Sound Cards Sub Menu.  Right arrow and Down Arrow to the new sound card and hit Enter to select it as your new JAWS sound card.  Be sure that you plug in an ear bud or head phones to the correct jack on the dongle, because  as soon as you hit enter on the sound card, JAWS will instantly switch to this device and stop coming through your speakers.  Now, you will only hear your windows sounds and Zoom participants in your speakers and only you will hear JAWS in your ear.  To adjust the volume of JAWS, you will need to go to the Windows Mixer.

Love in Christ
Marty
The Gospel is fully accessible to all.

 

Sent: Tuesday, March 23, 2021 1:31 AM

Subject: Re: zoom equipment.

 

Okay, I like that.

 

I knew I'd heard of some way of doing that?

 

So with the usb adapter, JaWS can't be heard by my zoom folks?  It can only be heard by me?

 

Justin

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marty Hutchings
Sent: Monday, March 22, 2021 4:45 PM
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

You could use a USB sound card adapter to run JAWS through.  You can also set up Zoom to be on mute until you need to speak then press the Space bar to speak and release to be muted.  Just use JAWS when you are muted.

 

Love in Christ
Marty
The Gospel is fully accessible to all.

 

Sent: Monday, March 22, 2021 3:36 PM

Subject: zoom equipment.

 

What do I have to buy in order to use jaws and zoom on my pc without people hearing jaws?

I'd like to use jaws without earphones and have people not hear jaws.

 

Thanks,

 

Justin

 

 

 

 

 

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: turn off email notifications

Bill White
 

Hi, Stan.

 

1. Open Outlook.

2. Press ALT, followed by F, then T for Options.

3. Arrow down to Mail, but do not press ENTER.

4. TAB to Display a Desktop Alert, and make sure this box is not checked.

5. TAB to OK, and press ENTER.

This should suppress desktop alerts, which is what you may be experiencing as notifications.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Stan Holdeman
Sent: Tuesday, March 23, 2021 2:00 PM
To: JFW list (main@jfw.groups.io)
Subject: turn off email notifications

 

Listers: How do I turn off email notifications from Outlook 2016? As it now they intrude even when I am doing other apps.

 

Running Windows 10 and jaws 2021.

 

Stan

 

Stan

 


moderated Re: turn off email notifications

Richard Turner
 

The first place to check is in the Options within outlook.

Press alt+f then t.

Arrow down once to Mail, and tab across and make sure anything to do with notifications, sounds, etc., are not checked.

 

You may also have a sound setting in your Sound Scheme, but start with the options settings first.

 

 

Richard

 

Ralph's Observation:  It is a mistake to allow any mechanical object<>to realize that you are in a hurry.

 

 

My web site, www.turner42.com

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Stan Holdeman
Sent: Tuesday, March 23, 2021 2:00 PM
To: JFW list (main@jfw.groups.io) <main@jfw.groups.io>
Subject: turn off email notifications

 

Listers: How do I turn off email notifications from Outlook 2016? As it now they intrude even when I am doing other apps.

 

Running Windows 10 and jaws 2021.

 

Stan

 

Stan

 


moderated turn off email notifications

Stan Holdeman
 

Listers: How do I turn off email notifications from Outlook 2016? As it now they intrude even when I am doing other apps.

 

Running Windows 10 and jaws 2021.

 

Stan

 

Stan

 


moderated Re: Number processing

Richard Turner
 

You are right.

Eloquence reads it as 32 51 but I can hardly stand to listen to Eloquence, so I’ll just deal with it.

 

 

 

Richard

 

Ralph's Observation:  It is a mistake to allow any mechanical object<>to realize that you are in a hurry.

 

 

My web site, www.turner42.com

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kevin Minor
Sent: Tuesday, March 23, 2021 12:43 PM
To: main@jfw.groups.io
Subject: Re: Number processing

 

Hi.

 

I encountered this problem, and in my case it was the Vocalizer speech itself. When I switched back to Elloquence, it went back to an acceptable level.

 

Kevin, Valerie and Jilly

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Tuesday, March 23, 2021 3:40 PM
To: main@jfw.groups.io
Subject: Number processing

 

Hello,

When Jaws reads a number written with a colon that is intended to be time, it says hours, rather than minutes, as in “Length: 32:51” which is really 32 minutes and 51 seconds.

Under number processing, there do not seem to be any settings that help. 

Any thoughts?

 

Richard

 

Ralph's Observation:  It is a mistake to allow any mechanical object<>to realize that you are in a hurry.

 

 

My web site, www.turner42.com

 

 

 


moderated Re: Number processing

Kevin Minor
 

Hi.

 

I encountered this problem, and in my case it was the Vocalizer speech itself. When I switched back to Elloquence, it went back to an acceptable level.

 

Kevin, Valerie and Jilly

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Tuesday, March 23, 2021 3:40 PM
To: main@jfw.groups.io
Subject: Number processing

 

Hello,

When Jaws reads a number written with a colon that is intended to be time, it says hours, rather than minutes, as in “Length: 32:51” which is really 32 minutes and 51 seconds.

Under number processing, there do not seem to be any settings that help. 

Any thoughts?

 

Richard

 

Ralph's Observation:  It is a mistake to allow any mechanical object<>to realize that you are in a hurry.

 

 

My web site, www.turner42.com

 

 

 


moderated Number processing

Richard Turner
 

Hello,

When Jaws reads a number written with a colon that is intended to be time, it says hours, rather than minutes, as in “Length: 32:51” which is really 32 minutes and 51 seconds.

Under number processing, there do not seem to be any settings that help. 

Any thoughts?

 

Richard

 

Ralph's Observation:  It is a mistake to allow any mechanical object<>to realize that you are in a hurry.

 

 

My web site, www.turner42.com

 

 

 


moderated Re: Help to set up calendar reminders in Outlook

Richard Turner
 

I do not know if there is a way to set it up so it goes out every two weeks or so, but if you set up the Calendar event for the 2nd and 4th Fridays, and add the people as invitees, when they accept the invite, it will be added to their calendar.

I’d put an alert for as long ahead of time as you want and that alert will go with the meeting invite.

So, if you set an alert for 1 day before, or 1 week before, they would get a reminder on their calendar.

 

I’ve never tried to set Outlook to send an email every so many days, etc.

But I know the calendar invites works quite well.

 

Now, if they are using a different calendar, I’m not sure how all that comes together.

 

HTH,

 

 

Richard

 

Ralph's Observation:  It is a mistake to allow any mechanical object<>to realize that you are in a hurry.

 

 

My web site, www.turner42.com

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jeff Lukacsena
Sent: Tuesday, March 23, 2021 11:11 AM
To: main@jfw.groups.io
Subject: Help to set up calendar reminders in Outlook

 

Hello List,

I have a quick question.

I’m using Jaws 2021 on a Linovo laptop running Windows 10.

I am using Outlook.

I want to set up a meeting reminder for a group of people.

I have a Zoom Link to share in the e-mail.

I need to make sure that this reminder goes out the second and fourth Friday of the month.

How can I set this up?

Thanks,

Jeff Lukacsena

 


moderated Re: changing the view of messages within Outlook

 

Or you can try to access the link from the Jaws Key + F7 list box, either way, changing the way the message is displayed won't help you here, in fact, if you copy the entire message and paste it into Notepad the link is no longer something you can click on, you would then have to copy the link, open your web browser, go into the address bar and paste it in. brin

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, March 23, 2021 10:02 AM
To: main@jfw.groups.io
Subject: Re: changing the view of messages within Outlook

Thanks, I'll try that next time.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via groups.io
Sent: March 23, 2021 9:51 AM
To: main@jfw.groups.io
Subject: Re: changing the view of messages within Outlook

Madison,
I also sometimes have issues with links in Outlook messages or calendar invitations. I tend to go to the link, then open the context menu with the application key or shift F10, and then select open hyperlink. This works more reliably for me.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, March 23, 2021 8:33 AM
To: main@jfw.groups.io
Subject: Re: changing the view of messages within Outlook

WARNING: This email originated externally. Exercise caution. Think before clicking links or opening attachments.


Because I find quite often when I click on a link I get taken to the subject of the message and not the webpage that the link is supposed to be for.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: March 22, 2021 6:26 PM
To: main@jfw.groups.io
Subject: Re: changing the view of messages within Outlook

Hi again, Madison. May I ask you a question?

Why do you want to change the view or format of the html messages? are they being displayed as tables? if so, the following may be of interest to you.

If Emails Read As Tables

1. Open Outlook.
2. Press JAWS key plus six on the numbers row for JAWS Settings.
3. Arrow down to Web / HTML / PDFs, and Right Arrow to open.
4. Arrow down to Reading, and Right Arrow to open.
5. Arrow down to Web Verbosity Level, Medium.
6. Arrow down to Configure Web Verbosity Levels, Right Arrow to open.
7. Arrow down to medium... and press SPACE BAR to open configuration.
8. Arrow down to Table Or Grid and make sure it is unchecked. (It is easier to press the END key and Arrow up to Table Or Grid.
9. TAB to OK, and press ENTER.

Bill White

billwhite92701@att.net

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Madison Martin
Sent: Monday, March 22, 2021 11:14 AM
To: main@jfw.groups.io
Subject: changing the view of messages within Outlook

Hi all,
How and where do I go to check and possibly change the format that received messages are displayed in (plain text, html etc) using Outlook? I went into mail options, but all I found was to change the format that messages are sent in which isn't what I want. I'm using the latest versions of Office 365, Windows 10 and Jaws. Hope someone can help me!!!! Thanks Madison


















This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@key.com with 'No Promotional E-mails' in the SUBJECT line.


moderated Help to set up calendar reminders in Outlook

Jeff Lukacsena
 

Hello List,

I have a quick question.

I’m using Jaws 2021 on a Linovo laptop running Windows 10.

I am using Outlook.

I want to set up a meeting reminder for a group of people.

I have a Zoom Link to share in the e-mail.

I need to make sure that this reminder goes out the second and fourth Friday of the month.

How can I set this up?

Thanks,

Jeff Lukacsena

 


moderated Re: changing the view of messages within Outlook

Madison Martin
 

Thanks, I'll try that next time.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via groups.io
Sent: March 23, 2021 9:51 AM
To: main@jfw.groups.io
Subject: Re: changing the view of messages within Outlook

Madison,
I also sometimes have issues with links in Outlook messages or calendar invitations. I tend to go to the link, then open the context menu with the application key or shift F10, and then select open hyperlink. This works more reliably for me.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, March 23, 2021 8:33 AM
To: main@jfw.groups.io
Subject: Re: changing the view of messages within Outlook

WARNING: This email originated externally. Exercise caution. Think before clicking links or opening attachments.


Because I find quite often when I click on a link I get taken to the subject of the message and not the webpage that the link is supposed to be for.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: March 22, 2021 6:26 PM
To: main@jfw.groups.io
Subject: Re: changing the view of messages within Outlook

Hi again, Madison. May I ask you a question?

Why do you want to change the view or format of the html messages? are they being displayed as tables? if so, the following may be of interest to you.

If Emails Read As Tables

1. Open Outlook.
2. Press JAWS key plus six on the numbers row for JAWS Settings.
3. Arrow down to Web / HTML / PDFs, and Right Arrow to open.
4. Arrow down to Reading, and Right Arrow to open.
5. Arrow down to Web Verbosity Level, Medium.
6. Arrow down to Configure Web Verbosity Levels, Right Arrow to open.
7. Arrow down to medium... and press SPACE BAR to open configuration.
8. Arrow down to Table Or Grid and make sure it is unchecked. (It is easier to press the END key and Arrow up to Table Or Grid.
9. TAB to OK, and press ENTER.

Bill White

billwhite92701@att.net

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Madison Martin
Sent: Monday, March 22, 2021 11:14 AM
To: main@jfw.groups.io
Subject: changing the view of messages within Outlook

Hi all,
How and where do I go to check and possibly change the format that received messages are displayed in (plain text, html etc) using Outlook? I went into mail options, but all I found was to change the format that messages are sent in which isn't what I want. I'm using the latest versions of Office 365, Windows 10 and Jaws. Hope someone can help me!!!! Thanks Madison


















This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@key.com with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: New Calibre link

Richard Turner
 

That is not the Calibre file, it is the interface to help the accessibility with a screen reader, specifically Jaws.

You have to install Calibre from their site and then you have to tell the ebook program where the Calibre executable is located.

There is a browse button to locate Calibre in the program when you run it.

Even though I accepted all the defaults when I installed Calibre, I still had to tell the program where it was, because the program is defaulting to the wrong location.

 

 

 

Richard

 

Ralph's Observation:  It is a mistake to allow any mechanical object<>to realize that you are in a hurry.

 

 

My web site, www.turner42.com

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jaffar Sidek
Sent: Tuesday, March 23, 2021 8:52 AM
To: main@jfw.groups.io
Subject: Re: New Calibre link

 

Hi.  I downloaded this file from Victor who offered it for our use.  However, I don't know if this is the real Calibre file as I've not installed it myself.  Give me some time to investigate.  My appologies and Cheers!

On 23/3/2021 11:39 pm, leonard morris wrote:

You said, "Hi. You can also get Calibre from my personal dropbox:"

https://www.dropbox.com/s/xrawm79eau736ey/Setup_eBook-convert_GUI_x64.exe?dl=1

I was able to obtain Setup_eBook-convert_GUI_x64 (1).exe and I installed it. However, when I ran the program eBook-convert GUI from the shortcut on my desktop I get the following message:

eBook-convert GUI
ebook-convert.exe not found in home folder or C:\Program
Files (x86)\Calibre2.
Please install Calibre or browse for the installation folder by
using the "Locate Calibre" button.
OK  

 

On 3/23/2021 1:49 AM, Mike B wrote:



Hi Jaffar & Mario,

 

Thank you very much.

 

 

Stay safe and take care.  Mike.

----- Original Message -----

From: Jaffar Sidek

Sent: Monday, March 22, 2021 7:56 AM

Subject: New Calibre link

 

Hi. You can also get Calibre from my personal dropbox:

https://www.dropbox.com/s/xrawm79eau736ey/Setup_eBook-convert_GUI_x64.exe?dl=1

It will be available for quite some time, so take your time to
download. Cheers!




 


moderated Re: changing the view of messages within Outlook

Ekstrand, Pamela A. -ND
 

I have been finding that when I open a calendar invite, it says nothing, and I cannot use the arrow keys or tab to get any information. I may be missing something since I am relatively new to using Outlook, but I have also found using shift F10 is helpful in accepting the invitation.

Pam

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via groups.io
Sent: Tuesday, March 23, 2021 10:51 AM
To: main@jfw.groups.io
Subject: Re: changing the view of messages within Outlook

Madison,
I also sometimes have issues with links in Outlook messages or calendar invitations. I tend to go to the link, then open the context menu with the application key or shift F10, and then select open hyperlink. This works more reliably for me.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, March 23, 2021 8:33 AM
To: main@jfw.groups.io
Subject: Re: changing the view of messages within Outlook

WARNING: This email originated externally. Exercise caution. Think before clicking links or opening attachments.


Because I find quite often when I click on a link I get taken to the subject of the message and not the webpage that the link is supposed to be for.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: March 22, 2021 6:26 PM
To: main@jfw.groups.io
Subject: Re: changing the view of messages within Outlook

Hi again, Madison. May I ask you a question?

Why do you want to change the view or format of the html messages? are they being displayed as tables? if so, the following may be of interest to you.

If Emails Read As Tables

1. Open Outlook.
2. Press JAWS key plus six on the numbers row for JAWS Settings.
3. Arrow down to Web / HTML / PDFs, and Right Arrow to open.
4. Arrow down to Reading, and Right Arrow to open.
5. Arrow down to Web Verbosity Level, Medium.
6. Arrow down to Configure Web Verbosity Levels, Right Arrow to open.
7. Arrow down to medium... and press SPACE BAR to open configuration.
8. Arrow down to Table Or Grid and make sure it is unchecked. (It is easier to press the END key and Arrow up to Table Or Grid.
9. TAB to OK, and press ENTER.

Bill White

billwhite92701@att.net

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Madison Martin
Sent: Monday, March 22, 2021 11:14 AM
To: main@jfw.groups.io
Subject: changing the view of messages within Outlook

Hi all,
How and where do I go to check and possibly change the format that received messages are displayed in (plain text, html etc) using Outlook? I went into mail options, but all I found was to change the format that messages are sent in which isn't what I want. I'm using the latest versions of Office 365, Windows 10 and Jaws. Hope someone can help me!!!! Thanks Madison


















This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association ("KeyBank N.A."). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@key.com with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: zoom equipment.

Marty Hutchings
 

 
Yes,  For around $12 on Amazon, you can get a little USB dongle that has a microphone and headphone jack.  Just plug it into any USB port then after it installs, press JAWS key + J to get to the JAWS context menu.  Down Arrow to the Utilities Sub menu, Right Arrow and Down Arrow to Sound Cards Sub Menu.  Right arrow and Down Arrow to the new sound card and hit Enter to select it as your new JAWS sound card.  Be sure that you plug in an ear bud or head phones to the correct jack on the dongle, because  as soon as you hit enter on the sound card, JAWS will instantly switch to this device and stop coming through your speakers.  Now, you will only hear your windows sounds and Zoom participants in your speakers and only you will hear JAWS in your ear.  To adjust the volume of JAWS, you will need to go to the Windows Mixer.
Love in Christ
Marty
The Gospel is fully accessible to all.
 

Sent: Tuesday, March 23, 2021 1:31 AM
Subject: Re: zoom equipment.
 

Okay, I like that.

 

I knew I'd heard of some way of doing that?

 

So with the usb adapter, JaWS can't be heard by my zoom folks?  It can only be heard by me?

 

Justin

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marty Hutchings
Sent: Monday, March 22, 2021 4:45 PM
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

You could use a USB sound card adapter to run JAWS through.  You can also set up Zoom to be on mute until you need to speak then press the Space bar to speak and release to be muted.  Just use JAWS when you are muted.

 

Love in Christ
Marty
The Gospel is fully accessible to all.

 

Sent: Monday, March 22, 2021 3:36 PM

Subject: zoom equipment.

 

What do I have to buy in order to use jaws and zoom on my pc without people hearing jaws?

I'd like to use jaws without earphones and have people not hear jaws.

 

Thanks,

 

Justin

 

 

 

 

 


moderated Re: Jaws2020 Notification setting on www.facebook.com or m.facebook.com

O.Addison Gethers
 

Does anyone use regular facebook or m.facebook.com  know how to add the following church and minister on notification setting?

Addison

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of O.Addison Gethers via groups.io
Sent: Monday, March 22, 2021 8:29 PM
To: jfw@groups.io
Subject: Jaws2020 Notification setting on www.facebook.com or m.facebook.com

 

Hi All  I have jaws2020 and desktop and laptop computer windows10 !! I have question about the notification  setting  on facebook or m.facebook.com  ,I’m trying to find out how can I add the church and minister who’s I’m following  to come on notification page when they come on facebook live  where I can go on notification  to press enter on for example  Abiding Words Family ministries was on facebook live now then I press enter it will play live !! Does anyone understand ? Does anyone know how can I add about 6 church and 3 minister in notification setting or somewhere in notification ?

Addison

 

 


moderated Re: New Calibre link

Jaffar Sidek
 

Hi.  I downloaded this file from Victor who offered it for our use.  However, I don't know if this is the real Calibre file as I've not installed it myself.  Give me some time to investigate.  My appologies and Cheers!

On 23/3/2021 11:39 pm, leonard morris wrote:
You said, "Hi. You can also get Calibre from my personal dropbox:"

https://www.dropbox.com/s/xrawm79eau736ey/Setup_eBook-convert_GUI_x64.exe?dl=1

I was able to obtain Setup_eBook-convert_GUI_x64 (1).exe and I installed it. However, when I ran the program eBook-convert GUI from the shortcut on my desktop I get the following message:

eBook-convert GUI
ebook-convert.exe not found in home folder or C:\Program
Files (x86)\Calibre2.
Please install Calibre or browse for the installation folder by
using the "Locate Calibre" button.
OK  

On 3/23/2021 1:49 AM, Mike B wrote:

Hi Jaffar & Mario,
 
Thank you very much.
 
 
Stay safe and take care.  Mike.
----- Original Message -----
Sent: Monday, March 22, 2021 7:56 AM
Subject: New Calibre link

Hi. You can also get Calibre from my personal dropbox:

https://www.dropbox.com/s/xrawm79eau736ey/Setup_eBook-convert_GUI_x64.exe?dl=1

It will be available for quite some time, so take your time to
download. Cheers!






4741 - 4760 of 92252