Date   

moderated Re: help! Can I get it back?

CathyAnne Murtha
 

Oh, that’s good! You might experiment with OneDrive and versions to avoid future issues.

CathyAnne
—-
CathyAnne Murtha
Access Texhnology Institute
cathy@...
(520) 955-6611
 


From: main@jfw.groups.io <main@jfw.groups.io> on behalf of Shirley Tracy <shirleytracy16@...>
Sent: Sunday, February 28, 2021 9:03 PM
To: main@jfw.groups.io
Subject: Re: help! Can I get it back?
 

CathyAnne,

 

I was using Word, but I hadn’t saved it in One Drive. My bad. I do have an older copy of my first draft. So things could be worse.

 

Thanks for responding.

 

Shirley Tracy

 

From: CathyAnne Murtha
Sent: Sunday, February 28, 2021 8:21 PM
To: main@jfw.groups.io
Subject: Re: help! Can I get it back?

 

What application were you using? 

 

If you were using Word and had your document uploaded to OneDrive, you may be able to recover a version in the backstage info property sheet.

 

CathyAnne

—-

CathyAnne Murtha

Access Texhnology Institute

cathy@...

(520) 955-6611

 

From: main@jfw.groups.io <main@jfw.groups.io> on behalf of Shirley Tracy <shirleytracy16@...>
Sent: Sunday, February 28, 2021 5:52 PM
To: main@jfw.groups.io
Subject: help! Can I get it back?

 

Hi Everyone,

 

I was nearly halfway through a long piece I was writing, and Suddenly I discovered about 2/3 of what I’ve accomplished has disappeared—poof!

 

Unfortunately I had closed the file and reopened it before I made my discovery. No idea what happened.

Using JAWS, is there a simple way I can recover the missing part of the deleted file.

 

Desperately,

 

Shirley Tracy

 

 


moderated Re: help! Can I get it back?

Shirley Tracy
 

CathyAnne,

 

I was using Word, but I hadn’t saved it in One Drive. My bad. I do have an older copy of my first draft. So things could be worse.

 

Thanks for responding.

 

Shirley Tracy

 

From: CathyAnne Murtha
Sent: Sunday, February 28, 2021 8:21 PM
To: main@jfw.groups.io
Subject: Re: help! Can I get it back?

 

What application were you using? 

 

If you were using Word and had your document uploaded to OneDrive, you may be able to recover a version in the backstage info property sheet.

 

CathyAnne

—-

CathyAnne Murtha

Access Texhnology Institute

cathy@...

(520) 955-6611

 

From: main@jfw.groups.io <main@jfw.groups.io> on behalf of Shirley Tracy <shirleytracy16@...>
Sent: Sunday, February 28, 2021 5:52 PM
To: main@jfw.groups.io
Subject: help! Can I get it back?

 

Hi Everyone,

 

I was nearly halfway through a long piece I was writing, and Suddenly I discovered about 2/3 of what I’ve accomplished has disappeared—poof!

 

Unfortunately I had closed the file and reopened it before I made my discovery. No idea what happened.

Using JAWS, is there a simple way I can recover the missing part of the deleted file.

 

Desperately,

 

Shirley Tracy

 

 


moderated Re: Am I in forms mode?

Bill White
 

Hi, Mark. If you have forms mode set to manual, and forms mode is not currently active or on, and you arrow up and down past a form field, it will say Edit combo. If you are actually in forms mode, and you arrow up and down while forms mode is on, you will not be able to arrow up and down, except if there are more forms fields adjacent to the field you are in. Even then, it will not say edit combo unless forms mode is not currently active.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mark
Sent: Sunday, February 28, 2021 7:06 PM
To: main@jfw.groups.io
Subject: Re: Am I in forms mode?

 

It's nice to have a keystroke do one thing, like Udo's script does. 

I'm surprised something dedicated to letting the user know if forms mode is on or off isn't already built into JAWS. It seems really important to me. 

If forms mode is on but you think it's off and so press enter thinking it will activate forms mode, might you accidentally submit the form?


moderated Re: Am I in forms mode?

Mark
 

It's nice to have a keystroke do one thing, like Udo's script does. 

I'm surprised something dedicated to letting the user know if forms mode is on or off isn't already built into JAWS. It seems really important to me. 

If forms mode is on but you think it's off and so press enter thinking it will activate forms mode, might you accidentally submit the form?


moderated Re: help! Can I get it back?

CathyAnne Murtha
 

What application were you using? 

If you were using Word and had your document uploaded to OneDrive, you may be able to recover a version in the backstage info property sheet.

CathyAnne
—-
CathyAnne Murtha
Access Texhnology Institute
cathy@...
(520) 955-6611
 


From: main@jfw.groups.io <main@jfw.groups.io> on behalf of Shirley Tracy <shirleytracy16@...>
Sent: Sunday, February 28, 2021 5:52 PM
To: main@jfw.groups.io
Subject: help! Can I get it back?
 

Hi Everyone,

 

I was nearly halfway through a long piece I was writing, and Suddenly I discovered about 2/3 of what I’ve accomplished has disappeared—poof!

 

Unfortunately I had closed the file and reopened it before I made my discovery. No idea what happened.

Using JAWS, is there a simple way I can recover the missing part of the deleted file.

 

Desperately,

 

Shirley Tracy

 


moderated help! Can I get it back?

Shirley Tracy
 

Hi Everyone,

 

I was nearly halfway through a long piece I was writing, and Suddenly I discovered about 2/3 of what I’ve accomplished has disappeared—poof!

 

Unfortunately I had closed the file and reopened it before I made my discovery. No idea what happened.

Using JAWS, is there a simple way I can recover the missing part of the deleted file.

 

Desperately,

 

Shirley Tracy

 


moderated Re: Am I in forms mode?

Mike B
 


I'm assuming the keystroke you've given is for the laptop layout but, the Active Cursor keystroke for desktop layout is, Alt + Delete.

Stay safe and take care.  Mike.

----- Original Message -----
Sent: Sunday, February 28, 2021 1:01 PM
Subject: Re: Am I in forms mode?

Hello,
I know the script was not very difficult to implement, but there is already something quite similar built into JAWS. 
The keystroke alt-numlock period will tell you the active cursor. Sometimes this gives more information than one would want, but if it says 
“PC Cursor” or forms 
, then you will be in a mode where most characters are sent directly to the web page.

This script is called SayActiveCursor if you would like to bind it do a different keystroke.

Jonathan Cohn

On Feb 26, 2021, at 10:34 PM, Mark <mweiler@...> wrote:

Is there a short cut that will tell me if I'm in forms mode or not?


moderated Re: eliminate annoucement of blank lines in Outlook JAWS 2021

Mike B
 

Also, with Outlook open look in the Settings Center /Miscellaneous / Say Blank for empty and make sure this is unchecked.
This is the Miscellaneous folder that's by itself, number 26 of 27 in the Settings Center folder list.

Stay safe and take care.  Mike.

----- Original Message -----
Sent: Sunday, February 28, 2021 2:28 PM
Subject: Re: eliminate annoucement of blank lines in Outlook JAWS 2021

Did you check in settings center (insert-6) for Skip Blank Lines While Navigating in the 

ReadingWeb / HTML / PDFs category?

This is turned on in default for me but off in Outlook.

Best Wishes,
Jonathan Cohn



On Feb 28, 2021, at 4:41 PM, Shai <shaiwol@...> wrote:

Hello,
I am wondering if there is a means to have JAWS ignore blank lines
when reading a message in Outlook?
I receive many emails per day and it would be pleasant if there is a
means of doing this. I have been through the schemes and sounds
manager where I did try to edit the classic scheme. I went to the
misc. tab and noticed that new lines only had speak using message
voice or play sound.
Thank you in advance for any responses.


--
Shai Wolman
Wolman technologies
(619)894-6587
Providing training to children and adults that empowers them to be
productive and successful with their assistive technology/computing
tasks.
atvistech@...







moderated Re: eliminate annoucement of blank lines in Outlook JAWS 2021

Cohn, Jonathan
 

Did you check in settings center (insert-6) for Skip Blank Lines While Navigating in the 

ReadingWeb / HTML / PDFs category?

This is turned on in default for me but off in Outlook.

Best Wishes,
Jonathan Cohn



On Feb 28, 2021, at 4:41 PM, Shai <shaiwol@...> wrote:

Hello,
I am wondering if there is a means to have JAWS ignore blank lines
when reading a message in Outlook?
I receive many emails per day and it would be pleasant if there is a
means of doing this. I have been through the schemes and sounds
manager where I did try to edit the classic scheme. I went to the
misc. tab and noticed that new lines only had speak using message
voice or play sound.
Thank you in advance for any responses.


--
Shai Wolman
Wolman technologies
(619)894-6587
Providing training to children and adults that empowers them to be
productive and successful with their assistive technology/computing
tasks.
atvistech@...







moderated eliminate annoucement of blank lines in Outlook JAWS 2021

Shai
 

Hello,
I am wondering if there is a means to have JAWS ignore blank lines
when reading a message in Outlook?
I receive many emails per day and it would be pleasant if there is a
means of doing this. I have been through the schemes and sounds
manager where I did try to edit the classic scheme. I went to the
misc. tab and noticed that new lines only had speak using message
voice or play sound.
Thank you in advance for any responses.


--
Shai Wolman
Wolman technologies
(619)894-6587
Providing training to children and adults that empowers them to be
productive and successful with their assistive technology/computing
tasks.
atvistech@gmail.com


moderated Re: Am I in forms mode?

Cohn, Jonathan
 

Hello,
I know the script was not very difficult to implement, but there is already something quite similar built into JAWS. 
The keystroke alt-numlock period will tell you the active cursor. Sometimes this gives more information than one would want, but if it says 
“PC Cursor” or forms 
, then you will be in a mode where most characters are sent directly to the web page.

This script is called SayActiveCursor if you would like to bind it do a different keystroke.

Jonathan Cohn

On Feb 26, 2021, at 10:34 PM, Mark <mweiler@...> wrote:

Is there a short cut that will tell me if I'm in forms mode or not?


moderated Re: JAWS Voice Sometimes becomes Stifled

Jason White
 


On 28/2/21 12:48 pm, Richard B. McDonald wrote:
I am using Windows 10 and JAWS 2020.  Often, the JAWS voice cuts-out and becomes nearly inaudible while using my PC.  It is like it becomes stifled or greatly muffled.

This could be related to sound card drivers or associated settings. Does this still happen if you connect a USB or Bluetooth audio device and use it instead of the default sound device?



moderated JAWS Voice Sometimes becomes Stifled

Richard B. McDonald
 

Hi!

 

I am using Windows 10 and JAWS 2020.  Often, the JAWS voice cuts-out and becomes nearly inaudible while using my PC.  It is like it becomes stifled or greatly muffled.  Strangely, the PC sounds themselves (like startup, file delete, application open, etc.) are not stifled.  Sometimes, fiddling with the PC’s volume up/down level causes the JAWS voice to become normal.  Why is this?  How can I fix it?

 

Thanks,

Richard


moderated Re: Am I in forms mode?

Udo Egner-Walter
 

Hi Mark & list members, 

@Mark:
thank you very much for telling me the correct names. 

@All: 
I've put the script together with the "Read Me" file into a cloud storage. You can download both files there. Please let me know if something isn't clear so I can change this. The cloud storage is located in Switzerland so I don't know if the text will be in English. If you have trouble downloading please let me know and I mail the source code of the script in this list. Sometimes mailing source code is leading to trouble because mail clients sometimes combine two lines of text into one single line. This leads to compiler error messages so I prefer to give you the whole file to download. 

You can find the download here: 


Please keep in mind: Use my scripts always at your own risk. 
Udo 



Am 28.02.2021 um 16:58 schrieb Mark <mweiler@...>:

Here are the two folder numbers

Explore My Settings
Explore Scripts


moderated Re: Am I in forms mode?

CJ &AA MAY
 

Really? OK, perhaps I'll stop fretting then.
Alison

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: 28 February 2021 16:04
To: main@jfw.groups.io
Subject: Re: Am I in forms mode?

Allison, when typing the password in Zoom, this is one instance where it
isn't necessary to activate forms mode. simply type the password and press
enter or continue as needed to activate the join button.

-------- Original Message --------
From: CJ &AA MAY [mailto:chrisalismay@gmail.com]
To: <main@jfw.groups.io>
Date: Sunday, February 28, 2021, 2:54 AM
Subject: Am I in forms mode?
I’d like to know how to enable sounds for forms mode please. Jaws often does
make a sound when I enter an edit field, but not always, for example, the
editfield in Zoom so I never now whether I can type in the password or not.

Alison

*From:*main@jfw.groups.io <main@jfw.groups.io> *On Behalf Of *Mike B
*Sent:* 27 February 2021 14:01
*To:* main@jfw.groups.io
*Subject:* Re: Am I in forms mode?

If you assign sounds for when forms mode opens and closes this will tell
you.  This can be done in the Settings Center.  If you need steps just let
the list know.


Stay safe and take care.  Mike.

----- Original Message -----

*From:*Udo Egner-Walter via groups.io
<mailto:udo.egnerwalter=icloud.com@groups.io>

*To:*main@jfw.groups.io <mailto:main@jfw.groups.io>

*Sent:*Saturday, February 27, 2021 4:43 AM

*Subject:*Re: Am I in forms mode?

Hi Mark,

As far as I know there's no shortcut to detect forms mode. But it's no
problem to write a script doing this job.

If you are interested in this script let me know and I'll share this in this
list and describe how to install.

Best wishes

Udo



Am 27.02.2021 um 04:34 schrieb Mark <mweiler@alumni.sfu.ca
<mailto:mweiler@alumni.sfu.ca>>:

Is there a short cut that will tell me if I'm in forms mode or not?


moderated Re: Am I in forms mode?

Mario
 

Allison, when typing the password in Zoom, this is one instance where it isn't necessary to activate forms mode. simply type the password and press enter or continue as needed to activate the join button.

-------- Original Message --------
From: CJ &AA MAY [mailto:chrisalismay@gmail.com]
To: <main@jfw.groups.io>
Date: Sunday, February 28, 2021, 2:54 AM
Subject: Am I in forms mode?
I’d like to know how to enable sounds for forms mode please. Jaws often
does make a sound when I enter an edit field, but not always, for
example, the editfield in Zoom so I never now whether I can type in the
password or not.

Alison

*From:*main@jfw.groups.io <main@jfw.groups.io> *On Behalf Of *Mike B
*Sent:* 27 February 2021 14:01
*To:* main@jfw.groups.io
*Subject:* Re: Am I in forms mode?

If you assign sounds for when forms mode opens and closes this will tell
you.  This can be done in the Settings Center.  If you need steps just
let the list know.


Stay safe and take care.  Mike.

----- Original Message -----

*From:*Udo Egner-Walter via groups.io
<mailto:udo.egnerwalter=icloud.com@groups.io>

*To:*main@jfw.groups.io <mailto:main@jfw.groups.io>

*Sent:*Saturday, February 27, 2021 4:43 AM

*Subject:*Re: Am I in forms mode?

Hi Mark,

As far as I know there's no shortcut to detect forms mode. But it's no
problem to write a script doing this job.

If you are interested in this script let me know and I'll share this in
this list and describe how to install.

Best wishes

Udo



Am 27.02.2021 um 04:34 schrieb Mark <mweiler@alumni.sfu.ca
<mailto:mweiler@alumni.sfu.ca>>:

Is there a short cut that will tell me if I'm in forms mode or not?


moderated Re: Am I in forms mode?

Mark
 

Here are the two folder numbers

Explore My Settings
Explore Scripts


moderated Re: Am I in forms mode?

CJ &AA MAY
 

Many thanks for this. I will check it out. You may be right and it might already be enabled, and like you, I don’t know why in Zoom I don’t get the sound when looking for the password editfield.

Alison

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mark
Sent: 28 February 2021 12:40
To: main@jfw.groups.io
Subject: Re: Am I in forms mode?

 

Alison, it sounds like you may have sounds mode activated already.  I'm not sure why it's inconsistent in Zoom though. However, the way I do it is open the JAWS setting centre, then search for Forms Mode Sounds. Then F6 to settings pane, then tab to the Enable Sound Notifications checkbox.  Select it. Once it's selected, two buttons become available immediately following it. The first is to select the sound for entering forms mode. The second is for selecting the sound for when leaving forms mode.  Activating the buttons will cause a dialog with list view of sounds to appear, along with 4 buttons, including a play button and browse button if you want to add your own sound effect.


moderated Re: Am I in forms mode?

Udo Egner-Walter
 

Hi Mark & list members,

no problem, I will support a download link soon and writing a "read me" file with installation instructions.

Meanwhile can someone please help me out? I'm not using the English version of JAWS. I can change the language in JAWS and getting the English names of menus and controls but if I select the "Utilities" entry in menu bar and the "Explore Utilities Folder" JAWS will open an Explorer window with file links. This file links are not in English and I don't know the exact name of a particular file link opening the settings folder. It must be something similar to "Explore my settings". Can someone please tell me the exact name so I can write it down in the "Read me" file? And for my records there is a file link also leading to script folder, I think it must be something similar to "Explore my scripts". Can someone please tell me the exact name as well?

Thanks in advance
Udo

Am 28.02.2021 um 13:31 schrieb Mark <mweiler@alumni.sfu.ca>:

Hi Udo, if you would share the script and how to install it, that would be greatly appreciate. I think it would be fine to share on this list. Scripts are part of enhancing the JAWS experience.


moderated Re: Am I in forms mode?

Mark
 

Alison, it sounds like you may have sounds mode activated already.  I'm not sure why it's inconsistent in Zoom though. However, the way I do it is open the JAWS setting centre, then search for Forms Mode Sounds. Then F6 to settings pane, then tab to the Enable Sound Notifications checkbox.  Select it. Once it's selected, two buttons become available immediately following it. The first is to select the sound for entering forms mode. The second is for selecting the sound for when leaving forms mode.  Activating the buttons will cause a dialog with list view of sounds to appear, along with 4 buttons, including a play button and browse button if you want to add your own sound effect.

2341 - 2360 of 89194