Date   

Re: Excel 2007 Adding a Second Worksheet

Dave...
 

Ted, Usually by default a new workbook contains 3 sheets. If you have 4
sheets, then you are "four sheets to the wind", perhaps?

Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7

----- Original Message -----
From: "Lisle, Ted (CHFS DMS)" <Ted.Lisle@ky.gov>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Friday, March 23, 2012 09:12
Subject: RE: Excel 2007 Adding a Second Worksheet


Yes, I think you're right. I went in and checked my keystrokes. I don't'
remember what the default number is, because I've never had a reason to
recall, but I know sheets can balloon to a gigantic size.

Ted

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Farfar
Sent: Friday, March 23, 2012 10:03 AM
To: The Jaws for Windows support list.
Subject: Re: Excel 2007 Adding a Second Worksheet

Ted,

For your benefit and others on this list, Ctrl+PageDown and Ctrl+PageUp
just switch between sheets; Does not add sheets.

Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7


----- Original Message -----
From: "Lisle, Ted (CHFS DMS)" <Ted.Lisle@ky.gov>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Friday, March 23, 2012 05:09
Subject: RE: Excel 2007 Adding a Second Worksheet


I think Ctrl-pagedown also works. I remember doing this once or twice
by accident, and freaking out because I thought I'd zapped an entire
day's work.

Ted

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of George B
Sent: Friday, March 23, 2012 7:13 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Excel 2007 Adding a Second Worksheet

you can also use your jaws key and go to the status line at the bottom
of the worksheets and there are sheet tabs. right click on a tab and
choose insert and choose sheet and choos where you wish to insert it.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Farfar
Sent: Thursday, March 22, 2012 13:34
To: The Jaws for Windows support list.
Subject: Re: Excel 2007 Adding a Second Worksheet

There used to be a keystroke called "Manage Worksheets" tied to
Alt+Shift+S
or to Insert+Shift+M, but they haven't worked for me since JAWS 12
came out.
Probably broken.

Best I can suggest is to Alt+h, then o then m to open the dialog.
There you can copy the current sheet, move sheets, etc.


Dave Carlson
Tastefully composed and transmitted from somewhere in the Western
United States, using a Dell Latitude E6520 and Windows 7


----- Original Message -----
From: "Milton Ota" <mota1252@samobile.net>
To: <jfw@lists.the-jdh.com>
Sent: Thursday, March 22, 2012 13:13
Subject: Excel 2007 Adding a Second Worksheet


I'm working in a workbook that is set up by months for Invoices, and I
have several Invoices that have to be made in a particular month,
calculation is done automatically for each sheet and summary--is there
a keyboard command in JFW 13 and Excel 2007 to create another sheet in
the same month? thanks in advance.

--
Email services provided by the System Access Mobile Network. Visit
www.serotek.com to learn more about accessibility anywhere.


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Excel 2007 Adding a Second Worksheet

Lisle, Ted (CHFS DMS)
 

Yes, I think you're right. I went in and checked my keystrokes. I don't'
remember what the default number is, because I've never had a reason to
recall, but I know sheets can balloon to a gigantic size.

Ted

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Farfar
Sent: Friday, March 23, 2012 10:03 AM
To: The Jaws for Windows support list.
Subject: Re: Excel 2007 Adding a Second Worksheet

Ted,

For your benefit and others on this list, Ctrl+PageDown and Ctrl+PageUp
just switch between sheets; Does not add sheets.

Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7


----- Original Message -----
From: "Lisle, Ted (CHFS DMS)" <Ted.Lisle@ky.gov>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Friday, March 23, 2012 05:09
Subject: RE: Excel 2007 Adding a Second Worksheet


I think Ctrl-pagedown also works. I remember doing this once or twice
by accident, and freaking out because I thought I'd zapped an entire
day's work.

Ted

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of George B
Sent: Friday, March 23, 2012 7:13 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Excel 2007 Adding a Second Worksheet

you can also use your jaws key and go to the status line at the bottom
of the worksheets and there are sheet tabs. right click on a tab and
choose insert and choose sheet and choos where you wish to insert it.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Farfar
Sent: Thursday, March 22, 2012 13:34
To: The Jaws for Windows support list.
Subject: Re: Excel 2007 Adding a Second Worksheet

There used to be a keystroke called "Manage Worksheets" tied to
Alt+Shift+S
or to Insert+Shift+M, but they haven't worked for me since JAWS 12
came out.
Probably broken.

Best I can suggest is to Alt+h, then o then m to open the dialog.
There you can copy the current sheet, move sheets, etc.


Dave Carlson
Tastefully composed and transmitted from somewhere in the Western
United States, using a Dell Latitude E6520 and Windows 7


----- Original Message -----
From: "Milton Ota" <mota1252@samobile.net>
To: <jfw@lists.the-jdh.com>
Sent: Thursday, March 22, 2012 13:13
Subject: Excel 2007 Adding a Second Worksheet


I'm working in a workbook that is set up by months for Invoices, and I
have several Invoices that have to be made in a particular month,
calculation is done automatically for each sheet and summary--is there
a keyboard command in JFW 13 and Excel 2007 to create another sheet in
the same month? thanks in advance.

--
Email services provided by the System Access Mobile Network. Visit
www.serotek.com to learn more about accessibility anywhere.


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Excel 2007 Adding a Second Worksheet

Dave...
 

Ted,

For your benefit and others on this list, Ctrl+PageDown and Ctrl+PageUp just
switch between sheets; Does not add sheets.

Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7

----- Original Message -----
From: "Lisle, Ted (CHFS DMS)" <Ted.Lisle@ky.gov>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Friday, March 23, 2012 05:09
Subject: RE: Excel 2007 Adding a Second Worksheet


I think Ctrl-pagedown also works. I remember doing this once or twice
by accident, and freaking out because I thought I'd zapped an entire
day's work.

Ted

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of George B
Sent: Friday, March 23, 2012 7:13 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Excel 2007 Adding a Second Worksheet

you can also use your jaws key and go to the status line at the bottom
of the worksheets and there are sheet tabs. right click on a tab and
choose insert and choose sheet and choos where you wish to insert it.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Farfar
Sent: Thursday, March 22, 2012 13:34
To: The Jaws for Windows support list.
Subject: Re: Excel 2007 Adding a Second Worksheet

There used to be a keystroke called "Manage Worksheets" tied to
Alt+Shift+S
or to Insert+Shift+M, but they haven't worked for me since JAWS 12
came out.
Probably broken.

Best I can suggest is to Alt+h, then o then m to open the dialog.
There you can copy the current sheet, move sheets, etc.


Dave Carlson
Tastefully composed and transmitted from somewhere in the Western
United States, using a Dell Latitude E6520 and Windows 7


----- Original Message -----
From: "Milton Ota" <mota1252@samobile.net>
To: <jfw@lists.the-jdh.com>
Sent: Thursday, March 22, 2012 13:13
Subject: Excel 2007 Adding a Second Worksheet


I'm working in a workbook that is set up by months for Invoices, and I
have several Invoices that have to be made in a particular month,
calculation is done automatically for each sheet and summary--is there
a keyboard command in JFW 13 and Excel 2007 to create another sheet in
the same month? thanks in advance.

--
Email services provided by the System Access Mobile Network. Visit
www.serotek.com to learn more about accessibility anywhere.


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Excel 2007 Adding a Second Worksheet

Lisle, Ted (CHFS DMS)
 

I think Ctrl-pagedown also works. I remember doing this once or twice
by accident, and freaking out because I thought I'd zapped an entire
day's work.

Ted

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of George B
Sent: Friday, March 23, 2012 7:13 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Excel 2007 Adding a Second Worksheet

you can also use your jaws key and go to the status line at the bottom
of the worksheets and there are sheet tabs. right click on a tab and
choose insert and choose sheet and choos where you wish to insert it.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Farfar
Sent: Thursday, March 22, 2012 13:34
To: The Jaws for Windows support list.
Subject: Re: Excel 2007 Adding a Second Worksheet

There used to be a keystroke called "Manage Worksheets" tied to
Alt+Shift+S
or to Insert+Shift+M, but they haven't worked for me since JAWS 12
came out.
Probably broken.

Best I can suggest is to Alt+h, then o then m to open the dialog.
There you can copy the current sheet, move sheets, etc.


Dave Carlson
Tastefully composed and transmitted from somewhere in the Western
United States, using a Dell Latitude E6520 and Windows 7


----- Original Message -----
From: "Milton Ota" <mota1252@samobile.net>
To: <jfw@lists.the-jdh.com>
Sent: Thursday, March 22, 2012 13:13
Subject: Excel 2007 Adding a Second Worksheet


I'm working in a workbook that is set up by months for Invoices, and I
have several Invoices that have to be made in a particular month,
calculation is done automatically for each sheet and summary--is there
a keyboard command in JFW 13 and Excel 2007 to create another sheet in
the same month? thanks in advance.

--
Email services provided by the System Access Mobile Network. Visit
www.serotek.com to learn more about accessibility anywhere.


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: One more Outlook 2010 question for the day

Tom Behler
 

Dave:

Well, please know that I am exhausted already, and I haven't yet tried your thoughtfully composed fix here.

In return for your exhaustion, I promise you that I'll print these steps out in Braille, and try them exactly in the order you list here.

I'll get back to you with the results.

Thanks so much for your patience.

I appreciate it very much.

I'm a college professor, and like a professor, I guess these sorts of things bug me until I get them fixed. (smile)

Tom Behler from Michigan

----- Original Message -----
From: "Farfar" <dgcarlson@sbcglobal.net>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Thursday, March 22, 2012 11:27 PM
Subject: Re: One more Outlook 2010 question for the day


Tom,

You are exhausting me.

So now I'll exhaust you in return.
Follow all these steps carefully.
Record them to some place where you can listen to them one at a time so as
to follow along. Don't just read them inside the message and try to switch
back and forth.
Braille them, record them, have your wife read them from a printout -- just
make sure you can focus on the steps without lots of page switching.

Okay, now here we go.

First make sure you're in the Outlook In tray

Press Windows key
Type System sounds
Press Enter
Tab 3 times.
You should hear "Windows open xxx items"

you should be in a tree view with the various things that you can attach
sounds to. You've been here before from Kimsan's instructions, by the way.

press the letter N as in November until you hear: New Mail Notification
Tab twice and you hear what sound file has been assigned to your New Mail
notification.

Tell me what it says.

Tab again and you're on a test button.
Press spacebar.
Do you hear the sound?

If Yes, then I cannot help you.
Your problem makes no sense.

If no, then your sounds are not getting to your speakers/headphones.
Do this now:
Windows key
Type sndvol (That's S N D V O L)
Press Enter
Tab until you hear Volume for system sounds up down slider xx%
What is the percent?
If it's a number like 10 or 20, then press PageUp key until it's up around
80%

Tab again
is the system sounds button saying mute or unmute?

If mute, then don't do anything.

If unmute, then press the spacebar.

This should have fixed your problem.
Press Alt+Enter
Arrow to close
Press Enter

Now do this:
windows key
Type system sounds
Press Enter
(yes, we're doing this again)

Tab 3 times.
You should hear "Windows open xxx items"
press the letter N as in November until you hear: New Mail Notification
Tab twice and you hear what sound file has been assigned to your New Mail
notification.
Tab again and you're on a test button.
Press spacebar.
Do you hear the sound?

IF you don't after all this, you need to take your computer to an expert and
have them help you.

I'm exhausted and am going to bed.


Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7


----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Thursday, March 22, 2012 18:35
Subject: Re: One more Outlook 2010 question for the day


If you can tell me how to do this, I'll certainly give it a try!

All I need is some kind of a signal to tell me if new mail has arrived.

Tom Behler from Michigan

----- Original Message -----
From: "CM54" <crismunoz54@gmail.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Thursday, March 22, 2012 9:03 PM
Subject: RE: One more Outlook 2010 question for the day


Can you try assigning another wav sound notification for email alerts or
just grabbign one from online and see if that might work? Who knows maybe
your wav file is just booty. I've got 5 different email accounts
configured
through my Outlook 2010 and each account has a different alert sound so I
know what I'm getting and don't always have to check every single time.
Work, personel, mailing lists, etc.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Thursday, March 22, 2012 5:55 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

Kimson:

I wasn't able to get to the personalize sounds tab the way you did, but
did
get to it through the Windows 7 search engine.

Play windows start-up sound is checked. I could find the new mail
notification selection in the tree view, but could not check or uncheck it
via either the space bar or the enter key like you usually do.

However, my sighted wife said that it looked like it was checked.

Still no luck, though, in getting the new e-mail alert to sound.

So, I'm still at a loss here.

Any more thoughts would be appreciated.

Tom Behler from Michigan


----- Original Message -----
From: "Kimsan " <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Wednesday, March 21, 2012 11:43 AM
Subject: RE: One more Outlook 2010 question for the day


Tom,
At this point, lets look anyways. Sounds like you looked at the spot of
which I am going to direct you.
1. Go to the desktop and remove selection with F five or CTRL space bar.
2. Press your applications key or Shift f 10 and arrow up to personalize
and press enter
3. Now tab to sounds link and press enter
4. Tab to the treview and press "N" for new mail notification.

5. Tab once to play windows start up sounds and make sure that is
checked.

6. You can tab to test the sound or continue tabbing until you land on ok
and press space bar.


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Wednesday, March 21, 2012 3:44 AM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

Kimson:

I have checked under "sounds", but not "personalization/sounds".

Under sounds, it was checked.

If "personalization/sounds" is a different thing, I'll try that if you
can
tell me how to get there.

Tom Behler from Michigan


----- Original Message -----
From: "Kimsan " <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Tuesday, March 20, 2012 11:28 PM
Subject: RE: One more Outlook 2010 question for the day


Tom:
I have not read through all of the responses but have you checked under
personalization/sounds to see if the new mail notification is checked
and
working?



Kimsan Song Online Access Technology Trainer

www.BlindAccessTraining.com where we offer screen reader and web design
training


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Tuesday, March 20, 2012 4:34 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

Kimson:

I took the steps you outlined, and installed the Windows sound pack via
the
link you sent, but still no joy.

Still no alert sound as new mail is received in Outlook 2010.

Tom from Michigan


----- Original Message -----
From: "Kimsan" <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 10:49 PM
Subject: RE: One more Outlook 2010 question for the day


Tom:
Let's try the following.
1. open up word
2. alt f = back stage
3. up arrow and enter on options
4. Press "A" until you arrive to advance
5. It will be quicker if you shift-tab until you get to provide sound
with
feedback and check that box.
6. tab to ok and press space bar.
The sounds should work now in outlook 2010. If you do not have the
sound
pack for office let's hope this dropbox link will go through.
http://dl.dropbox.com/u/14984107/Sounds.EXE






Kimsan Song
Online access technology trainer
www.BlindAccessTraining.com


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Sunday, March 18, 2012 5:11 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

George:

Quick update here:

I just checked my control panel, and tested the new e-mail notification
alert, and it does work when I hit the test button. So, I think the
windows
sounds are already successfully installed on this machine.


Now, my challenge is to get Outlook 2010 to recognize it.

Tom from Michigan

----- Original Message -----
From: "George B" <gbmagoo@comcast.net>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 7:27 PM
Subject: RE: One more Outlook 2010 question for the day


i will look for my file you need to have the microsoft office sounds
installed.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Tom Behler
Sent: Sunday, March 18, 2012 16:03
To: Jaws users e-mail list
Subject: Fw: One more Outlook 2010 question for the day

Still struggling with this one.

My sighted wife checked, and the option to play the e-mail received
sound is
checked, but still no chime sound when a new e-mail is received in
Outlook
2010.

Very strange.

Tom from Michigan

----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 4:09 PM
Subject: One more Outlook 2010 question for the day


Hi, again, folks.

I'll try to make this my last question for today on configuring
Outlook
2010.
How do I get the program to send an alert sound when new e-mail is
received?

I am receiveing e-mail here, but don't get the usual sound
indicating
that, and I'd like to enable this feature if possible.

Thank you!

Tom From Michigan



_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Excel 2007 Adding a Second Worksheet

George B
 

you can also use your jaws key and go to the status line at the bottom of
the worksheets and there are sheet tabs. right click on a tab and choose
insert and choose sheet and choos where you wish to insert it.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Farfar
Sent: Thursday, March 22, 2012 13:34
To: The Jaws for Windows support list.
Subject: Re: Excel 2007 Adding a Second Worksheet

There used to be a keystroke called "Manage Worksheets" tied to
Alt+Shift+S
or to Insert+Shift+M, but they haven't worked for me since JAWS 12 came
out.
Probably broken.

Best I can suggest is to Alt+h, then o then m to open the dialog. There
you
can copy the current sheet, move sheets, etc.


Dave Carlson
Tastefully composed and transmitted from somewhere in the Western
United
States, using a Dell Latitude E6520 and Windows 7


----- Original Message -----
From: "Milton Ota" <mota1252@samobile.net>
To: <jfw@lists.the-jdh.com>
Sent: Thursday, March 22, 2012 13:13
Subject: Excel 2007 Adding a Second Worksheet


I'm working in a workbook that is set up by months for Invoices, and I
have several Invoices that have to be made in a particular month,
calculation is done automatically for each sheet and summary--is there
a keyboard command in JFW 13 and Excel 2007 to create another sheet in
the same month? thanks in advance.

--
Email services provided by the System Access Mobile Network. Visit
www.serotek.com to learn more about accessibility anywhere.


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: checking messages problem

Kimsan <kimsansong@...>
 

Lol, Figured out my problem.
Peace!

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Kimsan
Sent: Thursday, March 22, 2012 6:09 PM
To: jfw
Subject: checking messages problem



Hi,



Ok, using jfw 13, which I don't think that matters. When using the CTRL m to
check for messages nothing happens but when doing F 9 it does. How come CTRL
M isn't working here in outlook 2010?

Thanks.





-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201203
22/f247aef2/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 2641 bytes
Desc: not available
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201203
22/f247aef2/attachment.gif>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: One more Outlook 2010 question for the day

Dave...
 

Just unplug the headphones, and eliminate them from the equation. Too many
other variables, already.

Good suggestion, though.

Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7

----- Original Message -----
From: "CM54" <crismunoz54@gmail.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Thursday, March 22, 2012 20:34
Subject: RE: One more Outlook 2010 question for the day


Don't forget to try this with headphones on too.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Farfar
Sent: Thursday, March 22, 2012 8:28 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day
Importance: High

Tom,

You are exhausting me.

So now I'll exhaust you in return.
Follow all these steps carefully.
Record them to some place where you can listen to them one at a time so as
to follow along. Don't just read them inside the message and try to switch
back and forth.
Braille them, record them, have your wife read them from a printout -- just
make sure you can focus on the steps without lots of page switching.

Okay, now here we go.

First make sure you're in the Outlook In tray

Press Windows key
Type System sounds
Press Enter
Tab 3 times.
You should hear "Windows open xxx items"

you should be in a tree view with the various things that you can attach
sounds to. You've been here before from Kimsan's instructions, by the way.

press the letter N as in November until you hear: New Mail Notification Tab
twice and you hear what sound file has been assigned to your New Mail
notification.

Tell me what it says.

Tab again and you're on a test button.
Press spacebar.
Do you hear the sound?

If Yes, then I cannot help you.
Your problem makes no sense.

If no, then your sounds are not getting to your speakers/headphones.
Do this now:
Windows key
Type sndvol (That's S N D V O L)
Press Enter
Tab until you hear Volume for system sounds up down slider xx% What is the
percent?
If it's a number like 10 or 20, then press PageUp key until it's up around
80%

Tab again
is the system sounds button saying mute or unmute?

If mute, then don't do anything.

If unmute, then press the spacebar.

This should have fixed your problem.
Press Alt+Enter
Arrow to close
Press Enter

Now do this:
windows key
Type system sounds
Press Enter
(yes, we're doing this again)

Tab 3 times.
You should hear "Windows open xxx items"
press the letter N as in November until you hear: New Mail Notification Tab
twice and you hear what sound file has been assigned to your New Mail
notification.
Tab again and you're on a test button.
Press spacebar.
Do you hear the sound?

IF you don't after all this, you need to take your computer to an expert and
have them help you.

I'm exhausted and am going to bed.


Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7


----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Thursday, March 22, 2012 18:35
Subject: Re: One more Outlook 2010 question for the day


If you can tell me how to do this, I'll certainly give it a try!

All I need is some kind of a signal to tell me if new mail has arrived.

Tom Behler from Michigan

----- Original Message -----
From: "CM54" <crismunoz54@gmail.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Thursday, March 22, 2012 9:03 PM
Subject: RE: One more Outlook 2010 question for the day


Can you try assigning another wav sound notification for email alerts or
just grabbign one from online and see if that might work? Who knows maybe
your wav file is just booty. I've got 5 different email accounts
configured
through my Outlook 2010 and each account has a different alert sound so I
know what I'm getting and don't always have to check every single time.
Work, personel, mailing lists, etc.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Thursday, March 22, 2012 5:55 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

Kimson:

I wasn't able to get to the personalize sounds tab the way you did, but
did
get to it through the Windows 7 search engine.

Play windows start-up sound is checked. I could find the new mail
notification selection in the tree view, but could not check or uncheck it
via either the space bar or the enter key like you usually do.

However, my sighted wife said that it looked like it was checked.

Still no luck, though, in getting the new e-mail alert to sound.

So, I'm still at a loss here.

Any more thoughts would be appreciated.

Tom Behler from Michigan


----- Original Message -----
From: "Kimsan " <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Wednesday, March 21, 2012 11:43 AM
Subject: RE: One more Outlook 2010 question for the day


Tom,
At this point, lets look anyways. Sounds like you looked at the spot of
which I am going to direct you.
1. Go to the desktop and remove selection with F five or CTRL space bar.
2. Press your applications key or Shift f 10 and arrow up to personalize
and press enter
3. Now tab to sounds link and press enter
4. Tab to the treview and press "N" for new mail notification.

5. Tab once to play windows start up sounds and make sure that is
checked.

6. You can tab to test the sound or continue tabbing until you land on ok
and press space bar.


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Wednesday, March 21, 2012 3:44 AM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

Kimson:

I have checked under "sounds", but not "personalization/sounds".

Under sounds, it was checked.

If "personalization/sounds" is a different thing, I'll try that if you
can
tell me how to get there.

Tom Behler from Michigan


----- Original Message -----
From: "Kimsan " <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Tuesday, March 20, 2012 11:28 PM
Subject: RE: One more Outlook 2010 question for the day


Tom:
I have not read through all of the responses but have you checked under
personalization/sounds to see if the new mail notification is checked
and
working?



Kimsan Song Online Access Technology Trainer

www.BlindAccessTraining.com where we offer screen reader and web design
training


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Tuesday, March 20, 2012 4:34 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

Kimson:

I took the steps you outlined, and installed the Windows sound pack via
the
link you sent, but still no joy.

Still no alert sound as new mail is received in Outlook 2010.

Tom from Michigan


----- Original Message -----
From: "Kimsan" <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 10:49 PM
Subject: RE: One more Outlook 2010 question for the day


Tom:
Let's try the following.
1. open up word
2. alt f = back stage
3. up arrow and enter on options
4. Press "A" until you arrive to advance
5. It will be quicker if you shift-tab until you get to provide sound
with
feedback and check that box.
6. tab to ok and press space bar.
The sounds should work now in outlook 2010. If you do not have the
sound
pack for office let's hope this dropbox link will go through.
http://dl.dropbox.com/u/14984107/Sounds.EXE






Kimsan Song
Online access technology trainer
www.BlindAccessTraining.com


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Sunday, March 18, 2012 5:11 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

George:

Quick update here:

I just checked my control panel, and tested the new e-mail notification
alert, and it does work when I hit the test button. So, I think the
windows
sounds are already successfully installed on this machine.


Now, my challenge is to get Outlook 2010 to recognize it.

Tom from Michigan

----- Original Message -----
From: "George B" <gbmagoo@comcast.net>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 7:27 PM
Subject: RE: One more Outlook 2010 question for the day


i will look for my file you need to have the microsoft office sounds
installed.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Tom Behler
Sent: Sunday, March 18, 2012 16:03
To: Jaws users e-mail list
Subject: Fw: One more Outlook 2010 question for the day

Still struggling with this one.

My sighted wife checked, and the option to play the e-mail received
sound is
checked, but still no chime sound when a new e-mail is received in
Outlook
2010.

Very strange.

Tom from Michigan

----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 4:09 PM
Subject: One more Outlook 2010 question for the day


Hi, again, folks.

I'll try to make this my last question for today on configuring
Outlook
2010.
How do I get the program to send an alert sound when new e-mail is
received?

I am receiveing e-mail here, but don't get the usual sound
indicating
that, and I'd like to enable this feature if possible.

Thank you!

Tom From Michigan



_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: One more Outlook 2010 question for the day

Cristóbal
 

Don't forget to try this with headphones on too.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Farfar
Sent: Thursday, March 22, 2012 8:28 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day
Importance: High

Tom,

You are exhausting me.

So now I'll exhaust you in return.
Follow all these steps carefully.
Record them to some place where you can listen to them one at a time so as
to follow along. Don't just read them inside the message and try to switch
back and forth.
Braille them, record them, have your wife read them from a printout -- just
make sure you can focus on the steps without lots of page switching.

Okay, now here we go.

First make sure you're in the Outlook In tray

Press Windows key
Type System sounds
Press Enter
Tab 3 times.
You should hear "Windows open xxx items"

you should be in a tree view with the various things that you can attach
sounds to. You've been here before from Kimsan's instructions, by the way.

press the letter N as in November until you hear: New Mail Notification Tab
twice and you hear what sound file has been assigned to your New Mail
notification.

Tell me what it says.

Tab again and you're on a test button.
Press spacebar.
Do you hear the sound?

If Yes, then I cannot help you.
Your problem makes no sense.

If no, then your sounds are not getting to your speakers/headphones.
Do this now:
Windows key
Type sndvol (That's S N D V O L)
Press Enter
Tab until you hear Volume for system sounds up down slider xx% What is the
percent?
If it's a number like 10 or 20, then press PageUp key until it's up around
80%

Tab again
is the system sounds button saying mute or unmute?

If mute, then don't do anything.

If unmute, then press the spacebar.

This should have fixed your problem.
Press Alt+Enter
Arrow to close
Press Enter

Now do this:
windows key
Type system sounds
Press Enter
(yes, we're doing this again)

Tab 3 times.
You should hear "Windows open xxx items"
press the letter N as in November until you hear: New Mail Notification Tab
twice and you hear what sound file has been assigned to your New Mail
notification.
Tab again and you're on a test button.
Press spacebar.
Do you hear the sound?

IF you don't after all this, you need to take your computer to an expert and
have them help you.

I'm exhausted and am going to bed.


Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7


----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Thursday, March 22, 2012 18:35
Subject: Re: One more Outlook 2010 question for the day


If you can tell me how to do this, I'll certainly give it a try!

All I need is some kind of a signal to tell me if new mail has arrived.

Tom Behler from Michigan

----- Original Message -----
From: "CM54" <crismunoz54@gmail.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Thursday, March 22, 2012 9:03 PM
Subject: RE: One more Outlook 2010 question for the day


Can you try assigning another wav sound notification for email alerts or
just grabbign one from online and see if that might work? Who knows maybe
your wav file is just booty. I've got 5 different email accounts
configured
through my Outlook 2010 and each account has a different alert sound so I
know what I'm getting and don't always have to check every single time.
Work, personel, mailing lists, etc.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Thursday, March 22, 2012 5:55 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

Kimson:

I wasn't able to get to the personalize sounds tab the way you did, but
did
get to it through the Windows 7 search engine.

Play windows start-up sound is checked. I could find the new mail
notification selection in the tree view, but could not check or uncheck it
via either the space bar or the enter key like you usually do.

However, my sighted wife said that it looked like it was checked.

Still no luck, though, in getting the new e-mail alert to sound.

So, I'm still at a loss here.

Any more thoughts would be appreciated.

Tom Behler from Michigan


----- Original Message -----
From: "Kimsan " <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Wednesday, March 21, 2012 11:43 AM
Subject: RE: One more Outlook 2010 question for the day


Tom,
At this point, lets look anyways. Sounds like you looked at the spot of
which I am going to direct you.
1. Go to the desktop and remove selection with F five or CTRL space bar.
2. Press your applications key or Shift f 10 and arrow up to personalize
and press enter
3. Now tab to sounds link and press enter
4. Tab to the treview and press "N" for new mail notification.

5. Tab once to play windows start up sounds and make sure that is
checked.

6. You can tab to test the sound or continue tabbing until you land on ok
and press space bar.


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Wednesday, March 21, 2012 3:44 AM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

Kimson:

I have checked under "sounds", but not "personalization/sounds".

Under sounds, it was checked.

If "personalization/sounds" is a different thing, I'll try that if you
can
tell me how to get there.

Tom Behler from Michigan


----- Original Message -----
From: "Kimsan " <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Tuesday, March 20, 2012 11:28 PM
Subject: RE: One more Outlook 2010 question for the day


Tom:
I have not read through all of the responses but have you checked under
personalization/sounds to see if the new mail notification is checked
and
working?



Kimsan Song Online Access Technology Trainer

www.BlindAccessTraining.com where we offer screen reader and web design
training


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Tuesday, March 20, 2012 4:34 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

Kimson:

I took the steps you outlined, and installed the Windows sound pack via
the
link you sent, but still no joy.

Still no alert sound as new mail is received in Outlook 2010.

Tom from Michigan


----- Original Message -----
From: "Kimsan" <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 10:49 PM
Subject: RE: One more Outlook 2010 question for the day


Tom:
Let's try the following.
1. open up word
2. alt f = back stage
3. up arrow and enter on options
4. Press "A" until you arrive to advance
5. It will be quicker if you shift-tab until you get to provide sound
with
feedback and check that box.
6. tab to ok and press space bar.
The sounds should work now in outlook 2010. If you do not have the
sound
pack for office let's hope this dropbox link will go through.
http://dl.dropbox.com/u/14984107/Sounds.EXE






Kimsan Song
Online access technology trainer
www.BlindAccessTraining.com


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Sunday, March 18, 2012 5:11 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

George:

Quick update here:

I just checked my control panel, and tested the new e-mail notification
alert, and it does work when I hit the test button. So, I think the
windows
sounds are already successfully installed on this machine.


Now, my challenge is to get Outlook 2010 to recognize it.

Tom from Michigan

----- Original Message -----
From: "George B" <gbmagoo@comcast.net>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 7:27 PM
Subject: RE: One more Outlook 2010 question for the day


i will look for my file you need to have the microsoft office sounds
installed.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Tom Behler
Sent: Sunday, March 18, 2012 16:03
To: Jaws users e-mail list
Subject: Fw: One more Outlook 2010 question for the day

Still struggling with this one.

My sighted wife checked, and the option to play the e-mail received
sound is
checked, but still no chime sound when a new e-mail is received in
Outlook
2010.

Very strange.

Tom from Michigan

----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 4:09 PM
Subject: One more Outlook 2010 question for the day


Hi, again, folks.

I'll try to make this my last question for today on configuring
Outlook
2010.
How do I get the program to send an alert sound when new e-mail is
received?

I am receiveing e-mail here, but don't get the usual sound
indicating
that, and I'd like to enable this feature if possible.

Thank you!

Tom From Michigan



_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: One more Outlook 2010 question for the day

Dave...
 

Tom,

You are exhausting me.

So now I'll exhaust you in return.
Follow all these steps carefully.
Record them to some place where you can listen to them one at a time so as
to follow along. Don't just read them inside the message and try to switch
back and forth.
Braille them, record them, have your wife read them from a printout -- just
make sure you can focus on the steps without lots of page switching.

Okay, now here we go.

First make sure you're in the Outlook In tray

Press Windows key
Type System sounds
Press Enter
Tab 3 times.
You should hear "Windows open xxx items"

you should be in a tree view with the various things that you can attach
sounds to. You've been here before from Kimsan's instructions, by the way.

press the letter N as in November until you hear: New Mail Notification
Tab twice and you hear what sound file has been assigned to your New Mail
notification.

Tell me what it says.

Tab again and you're on a test button.
Press spacebar.
Do you hear the sound?

If Yes, then I cannot help you.
Your problem makes no sense.

If no, then your sounds are not getting to your speakers/headphones.
Do this now:
Windows key
Type sndvol (That's S N D V O L)
Press Enter
Tab until you hear Volume for system sounds up down slider xx%
What is the percent?
If it's a number like 10 or 20, then press PageUp key until it's up around
80%

Tab again
is the system sounds button saying mute or unmute?

If mute, then don't do anything.

If unmute, then press the spacebar.

This should have fixed your problem.
Press Alt+Enter
Arrow to close
Press Enter

Now do this:
windows key
Type system sounds
Press Enter
(yes, we're doing this again)

Tab 3 times.
You should hear "Windows open xxx items"
press the letter N as in November until you hear: New Mail Notification
Tab twice and you hear what sound file has been assigned to your New Mail
notification.
Tab again and you're on a test button.
Press spacebar.
Do you hear the sound?

IF you don't after all this, you need to take your computer to an expert and
have them help you.

I'm exhausted and am going to bed.


Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7

----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Thursday, March 22, 2012 18:35
Subject: Re: One more Outlook 2010 question for the day


If you can tell me how to do this, I'll certainly give it a try!

All I need is some kind of a signal to tell me if new mail has arrived.

Tom Behler from Michigan

----- Original Message -----
From: "CM54" <crismunoz54@gmail.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Thursday, March 22, 2012 9:03 PM
Subject: RE: One more Outlook 2010 question for the day


Can you try assigning another wav sound notification for email alerts or
just grabbign one from online and see if that might work? Who knows maybe
your wav file is just booty. I've got 5 different email accounts
configured
through my Outlook 2010 and each account has a different alert sound so I
know what I'm getting and don't always have to check every single time.
Work, personel, mailing lists, etc.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Thursday, March 22, 2012 5:55 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

Kimson:

I wasn't able to get to the personalize sounds tab the way you did, but
did
get to it through the Windows 7 search engine.

Play windows start-up sound is checked. I could find the new mail
notification selection in the tree view, but could not check or uncheck it
via either the space bar or the enter key like you usually do.

However, my sighted wife said that it looked like it was checked.

Still no luck, though, in getting the new e-mail alert to sound.

So, I'm still at a loss here.

Any more thoughts would be appreciated.

Tom Behler from Michigan


----- Original Message -----
From: "Kimsan " <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Wednesday, March 21, 2012 11:43 AM
Subject: RE: One more Outlook 2010 question for the day


Tom,
At this point, lets look anyways. Sounds like you looked at the spot of
which I am going to direct you.
1. Go to the desktop and remove selection with F five or CTRL space bar.
2. Press your applications key or Shift f 10 and arrow up to personalize
and press enter
3. Now tab to sounds link and press enter
4. Tab to the treview and press "N" for new mail notification.

5. Tab once to play windows start up sounds and make sure that is
checked.

6. You can tab to test the sound or continue tabbing until you land on ok
and press space bar.


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Wednesday, March 21, 2012 3:44 AM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

Kimson:

I have checked under "sounds", but not "personalization/sounds".

Under sounds, it was checked.

If "personalization/sounds" is a different thing, I'll try that if you
can
tell me how to get there.

Tom Behler from Michigan


----- Original Message -----
From: "Kimsan " <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Tuesday, March 20, 2012 11:28 PM
Subject: RE: One more Outlook 2010 question for the day


Tom:
I have not read through all of the responses but have you checked under
personalization/sounds to see if the new mail notification is checked
and
working?



Kimsan Song Online Access Technology Trainer

www.BlindAccessTraining.com where we offer screen reader and web design
training


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Tuesday, March 20, 2012 4:34 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

Kimson:

I took the steps you outlined, and installed the Windows sound pack via
the
link you sent, but still no joy.

Still no alert sound as new mail is received in Outlook 2010.

Tom from Michigan


----- Original Message -----
From: "Kimsan" <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 10:49 PM
Subject: RE: One more Outlook 2010 question for the day


Tom:
Let's try the following.
1. open up word
2. alt f = back stage
3. up arrow and enter on options
4. Press "A" until you arrive to advance
5. It will be quicker if you shift-tab until you get to provide sound
with
feedback and check that box.
6. tab to ok and press space bar.
The sounds should work now in outlook 2010. If you do not have the
sound
pack for office let's hope this dropbox link will go through.
http://dl.dropbox.com/u/14984107/Sounds.EXE






Kimsan Song
Online access technology trainer
www.BlindAccessTraining.com


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Sunday, March 18, 2012 5:11 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

George:

Quick update here:

I just checked my control panel, and tested the new e-mail notification
alert, and it does work when I hit the test button. So, I think the
windows
sounds are already successfully installed on this machine.


Now, my challenge is to get Outlook 2010 to recognize it.

Tom from Michigan

----- Original Message -----
From: "George B" <gbmagoo@comcast.net>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 7:27 PM
Subject: RE: One more Outlook 2010 question for the day


i will look for my file you need to have the microsoft office sounds
installed.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Tom Behler
Sent: Sunday, March 18, 2012 16:03
To: Jaws users e-mail list
Subject: Fw: One more Outlook 2010 question for the day

Still struggling with this one.

My sighted wife checked, and the option to play the e-mail received
sound is
checked, but still no chime sound when a new e-mail is received in
Outlook
2010.

Very strange.

Tom from Michigan

----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 4:09 PM
Subject: One more Outlook 2010 question for the day


Hi, again, folks.

I'll try to make this my last question for today on configuring
Outlook
2010.
How do I get the program to send an alert sound when new e-mail is
received?

I am receiveing e-mail here, but don't get the usual sound
indicating
that, and I'd like to enable this feature if possible.

Thank you!

Tom From Michigan



_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: One more Outlook 2010 question for the day

Cristóbal
 

Easy enough to see if it's the current wav file. All you have to do is
select another one and try that. I just grabbed some wavs from online and
created rules to associate incoming emails to a particular account and the
selected wav file. No different than in earlier versions of Outlook.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Thursday, March 22, 2012 6:36 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

If you can tell me how to do this, I'll certainly give it a try!

All I need is some kind of a signal to tell me if new mail has arrived.

Tom Behler from Michigan

----- Original Message -----
From: "CM54" <crismunoz54@gmail.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Thursday, March 22, 2012 9:03 PM
Subject: RE: One more Outlook 2010 question for the day


Can you try assigning another wav sound notification for email alerts or
just grabbign one from online and see if that might work? Who knows maybe
your wav file is just booty. I've got 5 different email accounts
configured
through my Outlook 2010 and each account has a different alert sound so I
know what I'm getting and don't always have to check every single time.
Work, personel, mailing lists, etc.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Thursday, March 22, 2012 5:55 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

Kimson:

I wasn't able to get to the personalize sounds tab the way you did, but
did
get to it through the Windows 7 search engine.

Play windows start-up sound is checked. I could find the new mail
notification selection in the tree view, but could not check or uncheck it
via either the space bar or the enter key like you usually do.

However, my sighted wife said that it looked like it was checked.

Still no luck, though, in getting the new e-mail alert to sound.

So, I'm still at a loss here.

Any more thoughts would be appreciated.

Tom Behler from Michigan


----- Original Message -----
From: "Kimsan " <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Wednesday, March 21, 2012 11:43 AM
Subject: RE: One more Outlook 2010 question for the day


Tom,
At this point, lets look anyways. Sounds like you looked at the spot of
which I am going to direct you.
1. Go to the desktop and remove selection with F five or CTRL space bar.
2. Press your applications key or Shift f 10 and arrow up to personalize
and press enter
3. Now tab to sounds link and press enter
4. Tab to the treview and press "N" for new mail notification.

5. Tab once to play windows start up sounds and make sure that is
checked.

6. You can tab to test the sound or continue tabbing until you land on ok
and press space bar.


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Wednesday, March 21, 2012 3:44 AM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

Kimson:

I have checked under "sounds", but not "personalization/sounds".

Under sounds, it was checked.

If "personalization/sounds" is a different thing, I'll try that if you
can
tell me how to get there.

Tom Behler from Michigan


----- Original Message -----
From: "Kimsan " <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Tuesday, March 20, 2012 11:28 PM
Subject: RE: One more Outlook 2010 question for the day


Tom:
I have not read through all of the responses but have you checked under
personalization/sounds to see if the new mail notification is checked
and
working?



Kimsan Song Online Access Technology Trainer

www.BlindAccessTraining.com where we offer screen reader and web design
training


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Tuesday, March 20, 2012 4:34 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

Kimson:

I took the steps you outlined, and installed the Windows sound pack via
the
link you sent, but still no joy.

Still no alert sound as new mail is received in Outlook 2010.

Tom from Michigan


----- Original Message -----
From: "Kimsan" <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 10:49 PM
Subject: RE: One more Outlook 2010 question for the day


Tom:
Let's try the following.
1. open up word
2. alt f = back stage
3. up arrow and enter on options
4. Press "A" until you arrive to advance
5. It will be quicker if you shift-tab until you get to provide sound
with
feedback and check that box.
6. tab to ok and press space bar.
The sounds should work now in outlook 2010. If you do not have the
sound
pack for office let's hope this dropbox link will go through.
http://dl.dropbox.com/u/14984107/Sounds.EXE






Kimsan Song
Online access technology trainer
www.BlindAccessTraining.com


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Sunday, March 18, 2012 5:11 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

George:

Quick update here:

I just checked my control panel, and tested the new e-mail notification
alert, and it does work when I hit the test button. So, I think the
windows
sounds are already successfully installed on this machine.


Now, my challenge is to get Outlook 2010 to recognize it.

Tom from Michigan

----- Original Message -----
From: "George B" <gbmagoo@comcast.net>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 7:27 PM
Subject: RE: One more Outlook 2010 question for the day


i will look for my file you need to have the microsoft office sounds
installed.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Tom Behler
Sent: Sunday, March 18, 2012 16:03
To: Jaws users e-mail list
Subject: Fw: One more Outlook 2010 question for the day

Still struggling with this one.

My sighted wife checked, and the option to play the e-mail received
sound is
checked, but still no chime sound when a new e-mail is received in
Outlook
2010.

Very strange.

Tom from Michigan

----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 4:09 PM
Subject: One more Outlook 2010 question for the day


Hi, again, folks.

I'll try to make this my last question for today on configuring
Outlook
2010.
How do I get the program to send an alert sound when new e-mail is
received?

I am receiveing e-mail here, but don't get the usual sound
indicating
that, and I'd like to enable this feature if possible.

Thank you!

Tom From Michigan



_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: One more Outlook 2010 question for the day

Tom Behler
 

If you can tell me how to do this, I'll certainly give it a try!

All I need is some kind of a signal to tell me if new mail has arrived.

Tom Behler from Michigan

----- Original Message -----
From: "CM54" <crismunoz54@gmail.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Thursday, March 22, 2012 9:03 PM
Subject: RE: One more Outlook 2010 question for the day


Can you try assigning another wav sound notification for email alerts or
just grabbign one from online and see if that might work? Who knows maybe
your wav file is just booty. I've got 5 different email accounts configured
through my Outlook 2010 and each account has a different alert sound so I
know what I'm getting and don't always have to check every single time.
Work, personel, mailing lists, etc.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Thursday, March 22, 2012 5:55 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

Kimson:

I wasn't able to get to the personalize sounds tab the way you did, but did
get to it through the Windows 7 search engine.

Play windows start-up sound is checked. I could find the new mail
notification selection in the tree view, but could not check or uncheck it
via either the space bar or the enter key like you usually do.

However, my sighted wife said that it looked like it was checked.

Still no luck, though, in getting the new e-mail alert to sound.

So, I'm still at a loss here.

Any more thoughts would be appreciated.

Tom Behler from Michigan


----- Original Message -----
From: "Kimsan " <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Wednesday, March 21, 2012 11:43 AM
Subject: RE: One more Outlook 2010 question for the day


Tom,
At this point, lets look anyways. Sounds like you looked at the spot of
which I am going to direct you.
1. Go to the desktop and remove selection with F five or CTRL space bar.
2. Press your applications key or Shift f 10 and arrow up to personalize
and press enter
3. Now tab to sounds link and press enter
4. Tab to the treview and press "N" for new mail notification.

5. Tab once to play windows start up sounds and make sure that is checked.

6. You can tab to test the sound or continue tabbing until you land on ok
and press space bar.


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Wednesday, March 21, 2012 3:44 AM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

Kimson:

I have checked under "sounds", but not "personalization/sounds".

Under sounds, it was checked.

If "personalization/sounds" is a different thing, I'll try that if you can
tell me how to get there.

Tom Behler from Michigan


----- Original Message -----
From: "Kimsan " <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Tuesday, March 20, 2012 11:28 PM
Subject: RE: One more Outlook 2010 question for the day


Tom:
I have not read through all of the responses but have you checked under
personalization/sounds to see if the new mail notification is checked and
working?



Kimsan Song Online Access Technology Trainer

www.BlindAccessTraining.com where we offer screen reader and web design
training


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Tuesday, March 20, 2012 4:34 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

Kimson:

I took the steps you outlined, and installed the Windows sound pack via
the
link you sent, but still no joy.

Still no alert sound as new mail is received in Outlook 2010.

Tom from Michigan


----- Original Message -----
From: "Kimsan" <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 10:49 PM
Subject: RE: One more Outlook 2010 question for the day


Tom:
Let's try the following.
1. open up word
2. alt f = back stage
3. up arrow and enter on options
4. Press "A" until you arrive to advance
5. It will be quicker if you shift-tab until you get to provide sound
with
feedback and check that box.
6. tab to ok and press space bar.
The sounds should work now in outlook 2010. If you do not have the sound
pack for office let's hope this dropbox link will go through.
http://dl.dropbox.com/u/14984107/Sounds.EXE






Kimsan Song
Online access technology trainer
www.BlindAccessTraining.com


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Sunday, March 18, 2012 5:11 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

George:

Quick update here:

I just checked my control panel, and tested the new e-mail notification
alert, and it does work when I hit the test button. So, I think the
windows
sounds are already successfully installed on this machine.


Now, my challenge is to get Outlook 2010 to recognize it.

Tom from Michigan

----- Original Message -----
From: "George B" <gbmagoo@comcast.net>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 7:27 PM
Subject: RE: One more Outlook 2010 question for the day


i will look for my file you need to have the microsoft office sounds
installed.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Tom Behler
Sent: Sunday, March 18, 2012 16:03
To: Jaws users e-mail list
Subject: Fw: One more Outlook 2010 question for the day

Still struggling with this one.

My sighted wife checked, and the option to play the e-mail received
sound is
checked, but still no chime sound when a new e-mail is received in
Outlook
2010.

Very strange.

Tom from Michigan

----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 4:09 PM
Subject: One more Outlook 2010 question for the day


Hi, again, folks.

I'll try to make this my last question for today on configuring
Outlook
2010.
How do I get the program to send an alert sound when new e-mail is
received?

I am receiveing e-mail here, but don't get the usual sound
indicating
that, and I'd like to enable this feature if possible.

Thank you!

Tom From Michigan



_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


checking messages problem

Kimsan <kimsansong@...>
 

Hi,



Ok, using jfw 13, which I don't think that matters. When using the CTRL m to
check for messages nothing happens but when doing F 9 it does. How come CTRL
M isn't working here in outlook 2010?

Thanks.





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120322/f247aef2/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 2641 bytes
Desc: not available
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120322/f247aef2/attachment.gif>


Re: One more Outlook 2010 question for the day

Cristóbal
 

Can you try assigning another wav sound notification for email alerts or
just grabbign one from online and see if that might work? Who knows maybe
your wav file is just booty. I've got 5 different email accounts configured
through my Outlook 2010 and each account has a different alert sound so I
know what I'm getting and don't always have to check every single time.
Work, personel, mailing lists, etc.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Thursday, March 22, 2012 5:55 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

Kimson:

I wasn't able to get to the personalize sounds tab the way you did, but did
get to it through the Windows 7 search engine.

Play windows start-up sound is checked. I could find the new mail
notification selection in the tree view, but could not check or uncheck it
via either the space bar or the enter key like you usually do.

However, my sighted wife said that it looked like it was checked.

Still no luck, though, in getting the new e-mail alert to sound.

So, I'm still at a loss here.

Any more thoughts would be appreciated.

Tom Behler from Michigan


----- Original Message -----
From: "Kimsan " <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Wednesday, March 21, 2012 11:43 AM
Subject: RE: One more Outlook 2010 question for the day


Tom,
At this point, lets look anyways. Sounds like you looked at the spot of
which I am going to direct you.
1. Go to the desktop and remove selection with F five or CTRL space bar.
2. Press your applications key or Shift f 10 and arrow up to personalize
and press enter
3. Now tab to sounds link and press enter
4. Tab to the treview and press "N" for new mail notification.

5. Tab once to play windows start up sounds and make sure that is checked.

6. You can tab to test the sound or continue tabbing until you land on ok
and press space bar.


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Wednesday, March 21, 2012 3:44 AM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

Kimson:

I have checked under "sounds", but not "personalization/sounds".

Under sounds, it was checked.

If "personalization/sounds" is a different thing, I'll try that if you can
tell me how to get there.

Tom Behler from Michigan


----- Original Message -----
From: "Kimsan " <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Tuesday, March 20, 2012 11:28 PM
Subject: RE: One more Outlook 2010 question for the day


Tom:
I have not read through all of the responses but have you checked under
personalization/sounds to see if the new mail notification is checked and
working?



Kimsan Song Online Access Technology Trainer

www.BlindAccessTraining.com where we offer screen reader and web design
training


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Tuesday, March 20, 2012 4:34 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

Kimson:

I took the steps you outlined, and installed the Windows sound pack via
the
link you sent, but still no joy.

Still no alert sound as new mail is received in Outlook 2010.

Tom from Michigan


----- Original Message -----
From: "Kimsan" <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 10:49 PM
Subject: RE: One more Outlook 2010 question for the day


Tom:
Let's try the following.
1. open up word
2. alt f = back stage
3. up arrow and enter on options
4. Press "A" until you arrive to advance
5. It will be quicker if you shift-tab until you get to provide sound
with
feedback and check that box.
6. tab to ok and press space bar.
The sounds should work now in outlook 2010. If you do not have the sound
pack for office let's hope this dropbox link will go through.
http://dl.dropbox.com/u/14984107/Sounds.EXE






Kimsan Song
Online access technology trainer
www.BlindAccessTraining.com


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Sunday, March 18, 2012 5:11 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

George:

Quick update here:

I just checked my control panel, and tested the new e-mail notification
alert, and it does work when I hit the test button. So, I think the
windows
sounds are already successfully installed on this machine.


Now, my challenge is to get Outlook 2010 to recognize it.

Tom from Michigan

----- Original Message -----
From: "George B" <gbmagoo@comcast.net>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 7:27 PM
Subject: RE: One more Outlook 2010 question for the day


i will look for my file you need to have the microsoft office sounds
installed.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Tom Behler
Sent: Sunday, March 18, 2012 16:03
To: Jaws users e-mail list
Subject: Fw: One more Outlook 2010 question for the day

Still struggling with this one.

My sighted wife checked, and the option to play the e-mail received
sound is
checked, but still no chime sound when a new e-mail is received in
Outlook
2010.

Very strange.

Tom from Michigan

----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 4:09 PM
Subject: One more Outlook 2010 question for the day


Hi, again, folks.

I'll try to make this my last question for today on configuring
Outlook
2010.
How do I get the program to send an alert sound when new e-mail is
received?

I am receiveing e-mail here, but don't get the usual sound
indicating
that, and I'd like to enable this feature if possible.

Thank you!

Tom From Michigan



_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: One more Outlook 2010 question for the day

Tom Behler
 

Kimson:

I wasn't able to get to the personalize sounds tab the way you did, but did get to it through the Windows 7 search engine.

Play windows start-up sound is checked. I could find the new mail notification selection in the tree view, but could not check or uncheck it via either the space bar or the enter key like you usually do.

However, my sighted wife said that it looked like it was checked.

Still no luck, though, in getting the new e-mail alert to sound.

So, I'm still at a loss here.

Any more thoughts would be appreciated.

Tom Behler from Michigan

----- Original Message -----
From: "Kimsan " <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Wednesday, March 21, 2012 11:43 AM
Subject: RE: One more Outlook 2010 question for the day


Tom,
At this point, lets look anyways. Sounds like you looked at the spot of
which I am going to direct you.
1. Go to the desktop and remove selection with F five or CTRL space bar.
2. Press your applications key or Shift f 10 and arrow up to personalize
and press enter
3. Now tab to sounds link and press enter
4. Tab to the treview and press "N" for new mail notification.

5. Tab once to play windows start up sounds and make sure that is checked.

6. You can tab to test the sound or continue tabbing until you land on ok
and press space bar.


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Wednesday, March 21, 2012 3:44 AM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

Kimson:

I have checked under "sounds", but not "personalization/sounds".

Under sounds, it was checked.

If "personalization/sounds" is a different thing, I'll try that if you can
tell me how to get there.

Tom Behler from Michigan


----- Original Message -----
From: "Kimsan " <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Tuesday, March 20, 2012 11:28 PM
Subject: RE: One more Outlook 2010 question for the day


Tom:
I have not read through all of the responses but have you checked under
personalization/sounds to see if the new mail notification is checked and
working?



Kimsan Song Online Access Technology Trainer

www.BlindAccessTraining.com where we offer screen reader and web design
training


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Tuesday, March 20, 2012 4:34 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

Kimson:

I took the steps you outlined, and installed the Windows sound pack via
the
link you sent, but still no joy.

Still no alert sound as new mail is received in Outlook 2010.

Tom from Michigan


----- Original Message -----
From: "Kimsan" <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 10:49 PM
Subject: RE: One more Outlook 2010 question for the day


Tom:
Let's try the following.
1. open up word
2. alt f = back stage
3. up arrow and enter on options
4. Press "A" until you arrive to advance
5. It will be quicker if you shift-tab until you get to provide sound
with
feedback and check that box.
6. tab to ok and press space bar.
The sounds should work now in outlook 2010. If you do not have the sound
pack for office let's hope this dropbox link will go through.
http://dl.dropbox.com/u/14984107/Sounds.EXE






Kimsan Song
Online access technology trainer
www.BlindAccessTraining.com


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Sunday, March 18, 2012 5:11 PM
To: The Jaws for Windows support list.
Subject: Re: One more Outlook 2010 question for the day

George:

Quick update here:

I just checked my control panel, and tested the new e-mail notification
alert, and it does work when I hit the test button. So, I think the
windows
sounds are already successfully installed on this machine.


Now, my challenge is to get Outlook 2010 to recognize it.

Tom from Michigan

----- Original Message -----
From: "George B" <gbmagoo@comcast.net>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 7:27 PM
Subject: RE: One more Outlook 2010 question for the day


i will look for my file you need to have the microsoft office sounds
installed.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Tom Behler
Sent: Sunday, March 18, 2012 16:03
To: Jaws users e-mail list
Subject: Fw: One more Outlook 2010 question for the day

Still struggling with this one.

My sighted wife checked, and the option to play the e-mail received
sound is
checked, but still no chime sound when a new e-mail is received in
Outlook
2010.

Very strange.

Tom from Michigan

----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Sunday, March 18, 2012 4:09 PM
Subject: One more Outlook 2010 question for the day


Hi, again, folks.

I'll try to make this my last question for today on configuring
Outlook
2010.
How do I get the program to send an alert sound when new e-mail is
received?

I am receiveing e-mail here, but don't get the usual sound indicating
that, and I'd like to enable this feature if possible.

Thank you!

Tom From Michigan



_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Incongruences between Jaws English and Jaws spanish

Gerardo Corripio <gera1027@...>
 

HI listers: I'm finally back after some time; very high expectations I'll
get lots of good things from here!

Yesterday I started listening to Jaws Daisy books to get a better grasp and
maybe learn some tricl or tip I might have missed, and found a few
inconsistencies between Jaws English and Jaws Spanish I'd like to point out;
maybe you guys have seen them?

For starters I've moved from Jaws12 to 13 which recently got translated in
Spanish. First of all I see no Spanish daisy books! I'd think I'd be able to
maybe learn some things by listening to the English daisy books, however
here is where some of the inconsistencies start:

The books say from the Help menu one can go to Traning which is the first
item. I looked and looked and can't find it in my spanish jaws! Neither that
or the Search for updates aren't there.

Yes those of us with enough english to understand, and with enough
experiences with Jaws are able to think up ways to get around and achieve
what is being taught in these books, but what about all those people who are
very excited to, once get Jaws, learn about the computer and all that it has
to offer? How are they suppose to achieve the filosofy by which these books
were originally designed?

2.-When downloading Spanish Jaws, the daisy books aren't there except for
the FS Getting started, thus having to download them manually.

3.-for some weird reason, FsReader doesn't recognize these Daisy files as
daisy! Hard as I might try to change directory and open the Daisy books, I
get a ding and yes I know they get installed in the correct place since I
can see them when I go to Program Files, Freedom Scientific, Jaws Training.

I'd like to say that thanks to the cassettes, preceeding these digital
books, I learned the basics, thus talking from personal experience. From the
time I've been on spanish lists, and I see so many questions posed on such
simple matters covered on these courses, I always had a dream to somehow be
able to colaborate with FS maybe by recording Spanish tutorials and maybe
incorporate them into Jaws Spanish software?

I invite you (if you know enough spanish that is) to visit my blog

<http://tuimagina.wordpress.com/> http://tuimagina.wordpress.com

In which I recently recorded a few Jaws Spanish podcasts.

Gerardo

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120322/0b7b98f1/attachment.html>


Re: JAWS 12 and 13 doesn't speak dialog box titles where previousversiondid

Michael Retondo <mretondo@...>
 

thanks, make perfect sense now.



Mike Retondo
SPSS Statistics Staff Programmer
IBM Business Analytics
IBM Software Group

233 S. Wacker Drive
Chicago, IL 60606
312-651-3223 direct
mretondo@us.ibm.com




From: "Farfar" <dgcarlson@sbcglobal.net>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>,
Date: 03/22/2012 03:43 PM
Subject: Re: JAWS 12 and 13 doesn't speak dialog box titles where
previousversiondid
Sent by: jfw-bounces@lists.the-jdh.com



The concept is that JAWS works off an object model of whatever is on the
screen, and it builds/maintains that model by intercepting everything that

goes through the video driver.

there is a video chain that allows insertion of drivers like PCAnywhere,
TeamView, DameWare to allow remote access to what's on your screen. JAWS
uses the same idea.

Older JAWS used a Video Intercept Manager or Display Chaining Manager.
They
switched to a mirror driver and now I may self correct here, use it either

with JAWS 12/13 or else the mirror driver is used only with Windows 7. But

at least it's something to consider, or to discuss with Freedom
Scientific.


Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7

----- Original Message -----
From: "Michael Retondo" <mretondo@us.ibm.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Thursday, March 22, 2012 13:26
Subject: Re: JAWS 12 and 13 doesn't speak dialog box titles where
previousversiondid


Can you elaborate a little on this, I'm not familiar with these concepts?



Mike Retondo
SPSS Statistics Staff Programmer
IBM Business Analytics
IBM Software Group

233 S. Wacker Drive
Chicago, IL 60606
312-651-3223 direct
mretondo@us.ibm.com




From: "Farfar" <dgcarlson@sbcglobal.net>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>,
Date: 03/22/2012 02:13 PM
Subject: Re: JAWS 12 and 13 doesn't speak dialog box titles where
previous versiondid
Sent by: jfw-bounces@lists.the-jdh.com



Starting with JAWS 12 the Video Intercept paradigm was replaced with the
mirror driver paradigm. You might want to look at this in your specialized

code.


Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7


----- Original Message -----
From: "Michael Retondo" <mretondo@us.ibm.com>
To: <jfw@lists.the-jdh.com>
Sent: Thursday, March 22, 2012 11:35
Subject: JAWS 12 and 13 doesn't speak dialog box titles where previous
versiondid


Our company has a very large Java application. It has worked very well
with JAWS going back to version 9 that I'm aware of. We since have been
test with versions 12 and 13 and have found that dialog and message boxes
titles aren't spoken. I even ran older versions of our application to make
sure it was nothing in our new code causing the problem. And sure enough
the older application works fine with JAWS 11 but not with version 12. Is
this a known issue or is there a new setting I'm unaware of?

Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<
http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120322/fcec9d67/attachment.html

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<
http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120322/32bdfa85/attachment.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 1055 bytes
Desc: not available
URL:
<
http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120322/32bdfa85/attachment.gif
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 2710 bytes
Desc: not available
URL:
<
http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120322/32bdfa85/attachment-0001.gif
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 1055 bytes
Desc: not available
URL:
<
http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120322/32bdfa85/attachment-0002.gif
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120322/6a80beb8/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 1055 bytes
Desc: not available
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120322/6a80beb8/attachment.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 2710 bytes
Desc: not available
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120322/6a80beb8/attachment-0001.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 1055 bytes
Desc: not available
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120322/6a80beb8/attachment-0002.gif>


Re: JAWS 12 and 13 doesn't speak dialog box titles where previousversiondid

Dave...
 

The concept is that JAWS works off an object model of whatever is on the
screen, and it builds/maintains that model by intercepting everything that
goes through the video driver.

there is a video chain that allows insertion of drivers like PCAnywhere,
TeamView, DameWare to allow remote access to what's on your screen. JAWS
uses the same idea.

Older JAWS used a Video Intercept Manager or Display Chaining Manager. They
switched to a mirror driver and now I may self correct here, use it either
with JAWS 12/13 or else the mirror driver is used only with Windows 7. But
at least it's something to consider, or to discuss with Freedom Scientific.


Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7

----- Original Message -----
From: "Michael Retondo" <mretondo@us.ibm.com>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Thursday, March 22, 2012 13:26
Subject: Re: JAWS 12 and 13 doesn't speak dialog box titles where
previousversiondid


Can you elaborate a little on this, I'm not familiar with these concepts?



Mike Retondo
SPSS Statistics Staff Programmer
IBM Business Analytics
IBM Software Group

233 S. Wacker Drive
Chicago, IL 60606
312-651-3223 direct
mretondo@us.ibm.com




From: "Farfar" <dgcarlson@sbcglobal.net>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>,
Date: 03/22/2012 02:13 PM
Subject: Re: JAWS 12 and 13 doesn't speak dialog box titles where
previous versiondid
Sent by: jfw-bounces@lists.the-jdh.com



Starting with JAWS 12 the Video Intercept paradigm was replaced with the
mirror driver paradigm. You might want to look at this in your specialized

code.


Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7


----- Original Message -----
From: "Michael Retondo" <mretondo@us.ibm.com>
To: <jfw@lists.the-jdh.com>
Sent: Thursday, March 22, 2012 11:35
Subject: JAWS 12 and 13 doesn't speak dialog box titles where previous
versiondid


Our company has a very large Java application. It has worked very well
with JAWS going back to version 9 that I'm aware of. We since have been
test with versions 12 and 13 and have found that dialog and message boxes
titles aren't spoken. I even ran older versions of our application to make
sure it was nothing in our new code causing the problem. And sure enough
the older application works fine with JAWS 11 but not with version 12. Is
this a known issue or is there a new setting I'm unaware of?

Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<
http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120322/fcec9d67/attachment.html
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120322/32bdfa85/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 1055 bytes
Desc: not available
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120322/32bdfa85/attachment.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 2710 bytes
Desc: not available
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120322/32bdfa85/attachment-0001.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 1055 bytes
Desc: not available
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120322/32bdfa85/attachment-0002.gif>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Excel 2007 Adding a Second Worksheet

Dave...
 

Check that. The old non-functioning keystrokes were Insert+shift+M or
Alt+Ctrl+S. Give them a try -- you might be lucky.

Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7

----- Original Message -----
From: "Milton Ota" <mota1252@samobile.net>
To: <jfw@lists.the-jdh.com>
Sent: Thursday, March 22, 2012 13:13
Subject: Excel 2007 Adding a Second Worksheet


I'm working in a workbook that is set up by months for Invoices, and I
have several Invoices that have to be made in a particular month,
calculation is done automatically for each sheet and summary--is there
a keyboard command in JFW 13 and Excel 2007 to create another sheet in
the same month? thanks in advance.

--
Email services provided by the System Access Mobile Network. Visit
www.serotek.com to learn more about accessibility anywhere.


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Excel 2007 Adding a Second Worksheet

Dave...
 

There used to be a keystroke called "Manage Worksheets" tied to Alt+Shift+S
or to Insert+Shift+M, but they haven't worked for me since JAWS 12 came out.
Probably broken.

Best I can suggest is to Alt+h, then o then m to open the dialog. There you
can copy the current sheet, move sheets, etc.


Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7

----- Original Message -----
From: "Milton Ota" <mota1252@samobile.net>
To: <jfw@lists.the-jdh.com>
Sent: Thursday, March 22, 2012 13:13
Subject: Excel 2007 Adding a Second Worksheet


I'm working in a workbook that is set up by months for Invoices, and I
have several Invoices that have to be made in a particular month,
calculation is done automatically for each sheet and summary--is there
a keyboard command in JFW 13 and Excel 2007 to create another sheet in
the same month? thanks in advance.

--
Email services provided by the System Access Mobile Network. Visit
www.serotek.com to learn more about accessibility anywhere.


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com