Date   

moderated Re: Run Dialogue & Websites

Bob Kennedy
 


Just to throw some confusion into the mix, if you are trying to reach the mobile version of FaceBook, it is m.facebook.com The word basic will draw up an error like he said.

I don't know if you are paying for the Eset security or not but I had to get rid of it. They claimed to be a part of Microsoft at one time and Microsoft doesn't contract with anyone to do their work. A lesson I learned after having to have MS clean up a mess they had made on my computer.

On Saturday, December 12, 2020, 02:33:27 PM EST, Mike B <mb69mach1@...> wrote:


Hi JM,
 
They're running Eset as their antivirus and I didn't try disabling it but, I'll let her know and or, I'll disable it the next time I get on her computer to see if this is the culprit.

Stay safe and take care.  Mike.
----- Original Message -----
From: JM Casey
Sent: Saturday, December 12, 2020 11:17 AM
Subject: Re: Run Dialogue & Websites

The http: part is always assumed. In fact your browser cannot be invoked without it. Because www. Is such a common prefix for web domains, though, if you enter in something like www.google.com into the run box, it *will* work – I am not sure but I guess the http:// is automatically invoked by Windows. However, typing in something like mbasic.facebook.com will not work. Windows has no way of telling that it’s supposed to be a URL.

 

As to the problem this person is having – it’s just a thought, but do they have any third party security software running? Perhaps try temporarily disabling it. Maybe it is preventing file explorer (which controls the run dialogue box) from invoking a browser.

 

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 12, 2020 02:05 PM
To: main@jfw.groups.io
Subject: Re: Run Dialogue & Websites

 

If it was saying something like file not found, be sure they used http:// and if it is a secure site, https:// and as Glen said, some sites don’t use the www. Just the http:// or https:// part.

 

 

 

 

Richard

"The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying.

There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss."

--Douglas Adams, from Life, The Universe and Everything, p.59

 

Check out my web site at: www.turner42.com

 

*I’m not the card shark

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
Sent: Saturday, December 12, 2020 10:57 AM
To: JList <main@jfw.groups.io>
Subject: Run Dialogue & Websites

 

Hi All,

 

I ran into a strange problem on a friend's Windows 7 Home computer.  When you type a URL into the Run Dialogue nothing happens!  I checked to make sure a browser was selected as the default and that all program associations were selected but, still nothing happens when you press enter on a URL from the Run Dialogue.

 

You can type, Notepad, or other commands into the Run Dialogue and you'll go straight to them but, for whatever reason URL's don't work, so to speak.  Can anyone shed some light on how to fix this issue?  All help is greatly appreciated.  Thanks much.


Stay safe and take care.  Mike.


moderated Re: Run Dialogue & Websites

Dave Durber
 

Hello:
 
When you type a URL into the Windows "Run" dialogue box, you must include "http://", "https://", "www.", (without the quotes) or, something similar, before the designated name of the URL. If you do not, you will get the Windows error message , that the designated name of the URL cannot be found and you should make sure the name is entered correctly and try again.
 
Dave
 

----- Original Message -----
From: JM Casey
Sent: Saturday, December 12, 2020 7:41 PM
Subject: Re: Run Dialogue & Websites

Yeah, seems worth a shot. If it works, then there’s probably some configuration option in eset that can be changed to let these things through.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
Sent: December 12, 2020 02:33 PM
To: main@jfw.groups.io
Subject: Re: Run Dialogue & Websites

 

Hi JM,

 

They're running Eset as their antivirus and I didn't try disabling it but, I'll let her know and or, I'll disable it the next time I get on her computer to see if this is the culprit.


Stay safe and take care.  Mike.

----- Original Message -----

From: JM Casey

Sent: Saturday, December 12, 2020 11:17 AM

Subject: Re: Run Dialogue & Websites

 

The http: part is always assumed. In fact your browser cannot be invoked without it. Because www. Is such a common prefix for web domains, though, if you enter in something like www.google.com into the run box, it *will* work – I am not sure but I guess the http:// is automatically invoked by Windows. However, typing in something like mbasic.facebook.com will not work. Windows has no way of telling that it’s supposed to be a URL.

 

As to the problem this person is having – it’s just a thought, but do they have any third party security software running? Perhaps try temporarily disabling it. Maybe it is preventing file explorer (which controls the run dialogue box) from invoking a browser.

 

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 12, 2020 02:05 PM
To: main@jfw.groups.io
Subject: Re: Run Dialogue & Websites

 

If it was saying something like file not found, be sure they used http:// and if it is a secure site, https:// and as Glen said, some sites don’t use the www. Just the http:// or https:// part.

 

 

 

 

Richard

"The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying.

There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss."

--Douglas Adams, from Life, The Universe and Everything, p.59

 

Check out my web site at: www.turner42.com

 

*I’m not the card shark

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
Sent: Saturday, December 12, 2020 10:57 AM
To: JList <main@jfw.groups.io>
Subject: Run Dialogue & Websites

 

Hi All,

 

I ran into a strange problem on a friend's Windows 7 Home computer.  When you type a URL into the Run Dialogue nothing happens!  I checked to make sure a browser was selected as the default and that all program associations were selected but, still nothing happens when you press enter on a URL from the Run Dialogue.

 

You can type, Notepad, or other commands into the Run Dialogue and you'll go straight to them but, for whatever reason URL's don't work, so to speak.  Can anyone shed some light on how to fix this issue?  All help is greatly appreciated.  Thanks much.


Stay safe and take care.  Mike.


moderated Re: Run Dialogue & Websites

JM Casey
 

Yeah, seems worth a shot. If it works, then there’s probably some configuration option in eset that can be changed to let these things through.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
Sent: December 12, 2020 02:33 PM
To: main@jfw.groups.io
Subject: Re: Run Dialogue & Websites

 

Hi JM,

 

They're running Eset as their antivirus and I didn't try disabling it but, I'll let her know and or, I'll disable it the next time I get on her computer to see if this is the culprit.


Stay safe and take care.  Mike.

----- Original Message -----

From: JM Casey

Sent: Saturday, December 12, 2020 11:17 AM

Subject: Re: Run Dialogue & Websites

 

The http: part is always assumed. In fact your browser cannot be invoked without it. Because www. Is such a common prefix for web domains, though, if you enter in something like www.google.com into the run box, it *will* work – I am not sure but I guess the http:// is automatically invoked by Windows. However, typing in something like mbasic.facebook.com will not work. Windows has no way of telling that it’s supposed to be a URL.

 

As to the problem this person is having – it’s just a thought, but do they have any third party security software running? Perhaps try temporarily disabling it. Maybe it is preventing file explorer (which controls the run dialogue box) from invoking a browser.

 

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 12, 2020 02:05 PM
To: main@jfw.groups.io
Subject: Re: Run Dialogue & Websites

 

If it was saying something like file not found, be sure they used http:// and if it is a secure site, https:// and as Glen said, some sites don’t use the www. Just the http:// or https:// part.

 

 

 

 

Richard

"The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying.

There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss."

--Douglas Adams, from Life, The Universe and Everything, p.59

 

Check out my web site at: www.turner42.com

 

*I’m not the card shark

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
Sent: Saturday, December 12, 2020 10:57 AM
To: JList <main@jfw.groups.io>
Subject: Run Dialogue & Websites

 

Hi All,

 

I ran into a strange problem on a friend's Windows 7 Home computer.  When you type a URL into the Run Dialogue nothing happens!  I checked to make sure a browser was selected as the default and that all program associations were selected but, still nothing happens when you press enter on a URL from the Run Dialogue.

 

You can type, Notepad, or other commands into the Run Dialogue and you'll go straight to them but, for whatever reason URL's don't work, so to speak.  Can anyone shed some light on how to fix this issue?  All help is greatly appreciated.  Thanks much.


Stay safe and take care.  Mike.


moderated Re: Run Dialogue & Websites

Mike B.
 

Hi JM,
 
They're running Eset as their antivirus and I didn't try disabling it but, I'll let her know and or, I'll disable it the next time I get on her computer to see if this is the culprit.

Stay safe and take care.  Mike.

----- Original Message -----
From: JM Casey
Sent: Saturday, December 12, 2020 11:17 AM
Subject: Re: Run Dialogue & Websites

The http: part is always assumed. In fact your browser cannot be invoked without it. Because www. Is such a common prefix for web domains, though, if you enter in something like www.google.com into the run box, it *will* work – I am not sure but I guess the http:// is automatically invoked by Windows. However, typing in something like mbasic.facebook.com will not work. Windows has no way of telling that it’s supposed to be a URL.

 

As to the problem this person is having – it’s just a thought, but do they have any third party security software running? Perhaps try temporarily disabling it. Maybe it is preventing file explorer (which controls the run dialogue box) from invoking a browser.

 

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 12, 2020 02:05 PM
To: main@jfw.groups.io
Subject: Re: Run Dialogue & Websites

 

If it was saying something like file not found, be sure they used http:// and if it is a secure site, https:// and as Glen said, some sites don’t use the www. Just the http:// or https:// part.

 

 

 

 

Richard

"The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying.

There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss."

--Douglas Adams, from Life, The Universe and Everything, p.59

 

Check out my web site at: www.turner42.com

 

*I’m not the card shark

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
Sent: Saturday, December 12, 2020 10:57 AM
To: JList <main@jfw.groups.io>
Subject: Run Dialogue & Websites

 

Hi All,

 

I ran into a strange problem on a friend's Windows 7 Home computer.  When you type a URL into the Run Dialogue nothing happens!  I checked to make sure a browser was selected as the default and that all program associations were selected but, still nothing happens when you press enter on a URL from the Run Dialogue.

 

You can type, Notepad, or other commands into the Run Dialogue and you'll go straight to them but, for whatever reason URL's don't work, so to speak.  Can anyone shed some light on how to fix this issue?  All help is greatly appreciated.  Thanks much.


Stay safe and take care.  Mike.


moderated Re: Run Dialogue & Websites

Mike B.
 

Glenn,
 
Yes, it was included as well as trying just, www. , or https://www.

Glenn, what's the name of that group you started a few months ago?
 
Stay safe and take care.  Mike.

----- Original Message -----
Sent: Saturday, December 12, 2020 11:00 AM
Subject: Re: Run Dialogue & Websites

Mike,
Did they include the http:// part?
Not all web sites use the WWW part though.
Glenn
----- Original Message -----
From: Mike B
To: JList
Sent: Saturday, December 12, 2020 12:56 PM
Subject: Run Dialogue & Websites

Hi All,
 
I ran into a strange problem on a friend's Windows 7 Home computer.  When you type a URL into the Run Dialogue nothing happens!  I checked to make sure a browser was selected as the default and that all program associations were selected but, still nothing happens when you press enter on a URL from the Run Dialogue.
 
You can type, Notepad, or other commands into the Run Dialogue and you'll go straight to them but, for whatever reason URL's don't work, so to speak.  Can anyone shed some light on how to fix this issue?  All help is greatly appreciated.  Thanks much.

Stay safe and take care.  Mike.


moderated Re: Run Dialogue & Websites

JM Casey
 

The http: part is always assumed. In fact your browser cannot be invoked without it. Because www. Is such a common prefix for web domains, though, if you enter in something like www.google.com into the run box, it *will* work – I am not sure but I guess the http:// is automatically invoked by Windows. However, typing in something like mbasic.facebook.com will not work. Windows has no way of telling that it’s supposed to be a URL.

 

As to the problem this person is having – it’s just a thought, but do they have any third party security software running? Perhaps try temporarily disabling it. Maybe it is preventing file explorer (which controls the run dialogue box) from invoking a browser.

 

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 12, 2020 02:05 PM
To: main@jfw.groups.io
Subject: Re: Run Dialogue & Websites

 

If it was saying something like file not found, be sure they used http:// and if it is a secure site, https:// and as Glen said, some sites don’t use the www. Just the http:// or https:// part.

 

 

 

 

Richard

"The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying.

There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss."

--Douglas Adams, from Life, The Universe and Everything, p.59

 

Check out my web site at: www.turner42.com

 

*I’m not the card shark

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
Sent: Saturday, December 12, 2020 10:57 AM
To: JList <main@jfw.groups.io>
Subject: Run Dialogue & Websites

 

Hi All,

 

I ran into a strange problem on a friend's Windows 7 Home computer.  When you type a URL into the Run Dialogue nothing happens!  I checked to make sure a browser was selected as the default and that all program associations were selected but, still nothing happens when you press enter on a URL from the Run Dialogue.

 

You can type, Notepad, or other commands into the Run Dialogue and you'll go straight to them but, for whatever reason URL's don't work, so to speak.  Can anyone shed some light on how to fix this issue?  All help is greatly appreciated.  Thanks much.


Stay safe and take care.  Mike.


moderated Re: Run Dialogue & Websites

Richard Turner
 

If it was saying something like file not found, be sure they used http:// and if it is a secure site, https:// and as Glen said, some sites don’t use the www. Just the http:// or https:// part.

 

 

 

 

Richard

"The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying.

There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss."

--Douglas Adams, from Life, The Universe and Everything, p.59

 

Check out my web site at: www.turner42.com

 

*I’m not the card shark

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
Sent: Saturday, December 12, 2020 10:57 AM
To: JList <main@jfw.groups.io>
Subject: Run Dialogue & Websites

 

Hi All,

 

I ran into a strange problem on a friend's Windows 7 Home computer.  When you type a URL into the Run Dialogue nothing happens!  I checked to make sure a browser was selected as the default and that all program associations were selected but, still nothing happens when you press enter on a URL from the Run Dialogue.

 

You can type, Notepad, or other commands into the Run Dialogue and you'll go straight to them but, for whatever reason URL's don't work, so to speak.  Can anyone shed some light on how to fix this issue?  All help is greatly appreciated.  Thanks much.


Stay safe and take care.  Mike.


moderated Re: Run Dialogue & Websites

Glenn / Lenny
 

Mike,
Did they include the http:// part?
Not all web sites use the WWW part though.
Glenn

----- Original Message -----
From: Mike B
To: JList
Sent: Saturday, December 12, 2020 12:56 PM
Subject: Run Dialogue & Websites

Hi All,
 
I ran into a strange problem on a friend's Windows 7 Home computer.  When you type a URL into the Run Dialogue nothing happens!  I checked to make sure a browser was selected as the default and that all program associations were selected but, still nothing happens when you press enter on a URL from the Run Dialogue.
 
You can type, Notepad, or other commands into the Run Dialogue and you'll go straight to them but, for whatever reason URL's don't work, so to speak.  Can anyone shed some light on how to fix this issue?  All help is greatly appreciated.  Thanks much.

Stay safe and take care.  Mike.


moderated Run Dialogue & Websites

Mike B.
 

Hi All,
 
I ran into a strange problem on a friend's Windows 7 Home computer.  When you type a URL into the Run Dialogue nothing happens!  I checked to make sure a browser was selected as the default and that all program associations were selected but, still nothing happens when you press enter on a URL from the Run Dialogue.
 
You can type, Notepad, or other commands into the Run Dialogue and you'll go straight to them but, for whatever reason URL's don't work, so to speak.  Can anyone shed some light on how to fix this issue?  All help is greatly appreciated.  Thanks much.

Stay safe and take care.  Mike.


moderated Re: Problem with jaws.

 

The more complaints FS gets about this issue the more likely fixing it will become a higher priority.  Though there is an obvious workaround, Marie is correct that a workaround and a solution/fix are not one and the same.

--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

One does not discover new lands without consenting to lose sight of the shore for a very long time.

           ~ André Gide


moderated Re: Problem with jaws.

Marie <magpie.mn@...>
 

I am running the 2 year SMA and have the problem. And yes you can stop from having Jaws in the system tray but that is not a solution to a bug.
Marie

-----Original Message-----
From: Bill White
Sent: Friday, December 11, 2020 4:17 PM
To: main@jfw.groups.io
Subject: Re: Problem with jaws.

Hi, Chris. Are you, by chance, using the new $90 per subscription to JAWS instead of using a 2-year SMA? If so, this is part of the problem. The new licensing scheme is causing problems for JAWS users. Try quitting JAWS with JAWS key plus F4, then restart JAWS using the shortcut on the desktop, or,

Press Windows key plus R for the run dialog.

At this dialog, type in the JAWS version you are running, E.G.

JAWS2021

This is a problem that will afflict you each time you start the computer.

I hope this helps you.

Bill White
billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Chris Hill
Sent: Friday, December 11, 2020 2:41 PM
To: jfw@groups.io
Subject: Problem with jaws.

I have jaws set to speak at the logon screen, and to start speaking
after I log in. The problem I'm having is that once it starts up again,
insert-j does nothing. If I quit jaws and restart, it works fine. I
tried a repair, and that didn't change anything. It looked so promising
on first boot, but I rebooted again, and it was back to problems. I'm
stumped.


moderated I Can't Read or Open Message Sent to My Google Group

Rick Miller
 

Dear Listers:

 

I’m sure there may be some of you out there who belong to a Google group of some kind and who maybe have tried to read messages not in your inbox but on the page of the  group you belong to.  This is the situation with me.  I am having trouble getting messages on my group’s page even just to open.  I find where the message is.  If it is unread I hit the enter key, but instead of opening the message nothing happens and the message just remains still.  I am using the latest version of JAWS and am using Windows 10.  One of you suggested I hit insert+Z to disable turn the virtual cursor off and try from there.  I did, but it didn’t work.  If any of you out there belong to a Google group and have tried reading messages from the group’s page, can you give me some tips on how to open and how to read such messages using JAWS?

 

 

 

Rick Miller

 


moderated Re: 2nd sound card for Jaws, retaining settings

David Diamond
 

I forgot to mention, the cost for that device was $29.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Randy Meyer
Sent: December 11, 2020 2:51 PM
To: main@jfw.groups.io
Subject: Re: 2nd sound card for Jaws, retaining settings

Thank you.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David
Diamond
Sent: Friday, December 11, 2020 4:22 PM
To: main@jfw.groups.io
Subject: Re: 2nd sound card for Jaws, retaining settings

Randy, it took some investigating as I did not realize I bought it more then 6
months ago. Anyway hope this helps. External USB Stereo Sound Card with
Adjustable Volume, PHOINIKAS 6-in-One USB Hubs with 7.1 Surround Sound
Audio Adapter, with 3.5 mm Headphone and Microphone Jack, for Windows,
Mac, PC, Laptops, Desktops, PS4 Computer Sold by: PHOINIKAS

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Randy Meyer
Sent: December 11, 2020 10:19 AM
To: main@jfw.groups.io
Subject: Re: 2nd sound card for Jaws, retaining settings

David:

What three channel mixer do you own? I might be interested in buying from
Amazon.

Randy Meyer

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David
Diamond
Sent: Friday, December 11, 2020 11:27 AM
To: main@jfw.groups.io
Subject: Re: 2nd sound card for Jaws, retaining settings

The 3 channel mixer I got from Amazon works perfectly. I have JAWS running
through one channel and Zoom running through the computer speakers and if
I want I can hear both at the same time. It even has a microphone jack which I
used as a test and recorded a zoom meeting. The host is narcistic and does not
like any of her imperfections repeated. Thus when a meeting is put to print or
notes, all of her flaws are taken out. The sad thing is though, some important
info is left out as well. Oh, well, no one is perfect and being a facilitator takes
training.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: December 11, 2020 9:11 AM
To: main@jfw.groups.io
Subject: Re: 2nd sound card for Jaws, retaining settings

I have had many problems with those USB sound cards and Jaws -- a lot of it
was hum -- I connect the phone jack to a mixer I have and I tried many usb
sound cards and I had to actually get a dac to solve my hum problem -- a lot
more expensive but it actually worked.

On Fri, 11 Dec 2020 10:50:05 -0500,
Mario wrote:
>
> I would imagine so because JAWS is speaking thru a different sound card.
>
> -------- Original Message --------
> From: Zel Iscel [mailto:zel@inclusiveworld.com.au]
> To: main@jfw.groups.io <main@jfw.groups.io> > Date: Friday, December
11, 2020, 10:11 AM > Subject: 2nd sound card for Jaws, retaining settings Hi
David, > > Does that mean you can hear Jaws when you're sharing your
screen with > sound whilst showing a video, without Jaws being heard by the
other > meeting participants?
>
> Cheers
> Zel
>
> image001.jpg
>
> Zel Iscel
> Disability Specialist
> Inclusive World
> Mobile: 0413813885
> Email: zel@inclusiveworld.com.au
>
> -----Original Message-----
> From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David >
Diamond > Sent: Thursday, 10 December 2020 7:02 AM > To:
main@jfw.groups.io > Subject: Re: 2nd sound card for Jaws, retaining
settings > > That's exactly the way I did it with a 3 channel mixer I got from >
Amazon, it works great. I can hear the Zoom conference yet hear Jaws >
through my hearing aids, if I want. Sometimes I don't want to hear > who left
or join the meeting.
>
> -----Original Message-----
> From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of ratshtron
> Sent: December 9, 2020 1:14 PM
> To: main@jfw.groups.io
> Subject: Re: 2nd sound card for Jaws, retaining settings
>
> I use a usb sound adaptor and have a wireless headset base plugged
> in to it and I have been using this setup for over two years. once > you
have your setup installed, press insert plus j then down arrow to > utilities
and then to sound cards and press enter.select the device > you wish to use
with JAWS and press enter. the selection should stay > once selected.
>
>
> Legend has it that on Wednesday 12/9/2020 12:37 PM, George Gray said:
> ----------------------------------------
> >How, exactly, did you accomplish this? I tried it a while back and
> was >totally unsuccessful, but would like to try again.
> >
> >Thanks.
> >
> >On 12/9/20, Norma A. Boge <naboge@mchsi.com> wrote:
> > > Hi group,
> > >
> > > My selections for using Jaws with a second sound card seem to be
> > > staying where I set them. Thanks to all for the suggestions.
> > >
> > > Best,
> > > Norma
> > >
> > >
> > > -----Original Message-----
> > > From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Pat
> Byrne > > Sent: Tuesday, December 8, 2020 2:47 PM > > To:
> main@jfw.groups.io > > Subject: Re: 2nd sound card for Jaws, > retaining
settings > > > > Norma, > > I am using a similar setup to > yours. Mine was a
bit unstable at > > first but, cross my fingers, it > has been stable for a couple
of years.
> > > On the other hand, we tried a separarte USB > card in my wife's
> desktop and it > > never functioned successfully.
> > > There are too many variables to get a handle on.
> > > Good luck.
> > > Pat ByrneAt 09:07 PM 12/7/2020, you wrote:
> > >
> > >>Hi group,
> > >>
> > >>
> > >>
> > >>I hope everyone is doing well. I have my Jaws > >>2020 going
> through a USB sound card. I have all other sounds going > > >>through my
default sound card to external speakers. I am > running > >>into times when
Jaws gets set back to the default sound > card and the > >>system sounds
come through my headphones. Or all > sounds come through > >>the
default card (external speakers) Â or > through the headphones.
> > >>Or Jaws goes through the default card and the system sounds
> through > >>my headphones.
> > >>
> > >>How can I get Jaws and Windows 10 to retain my settings? I need
> to > >>keep this setup for hosting Zoom meetings.
> > >>
> > >>I have downloaded System Volume View but haven’t ¢t installed
> it yet.
> > >>Would working with this program to set profiles for different >
> >>configurations be easier than working with the Win > 10 settings?
> > >>
> > >>
> > >>
> > >>Thanks for reading,
> > >>
> > >>Norma
> > >>
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >--
> >HAVE A MAGNIFICENT DAY
> >
> >GEORGE BURRELL GRAY
> >
> >Los Cerros
> >Sosua
> >REPUBLICA DOMINICANA
> >
> >
> >
> ----------------------------------------
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


moderated Re: Problem with jaws.

Chris Hill
 

I'm running the latest version of windows 10, and things are fine on one computer, but not on the other.  Weird!


CH

On 12/11/2020 17:27, Marie wrote:
Are you running Win 10 version 20 2H? This morning my laptop and Surface Pro both updated to the new OS and they both have the intermittent issue you are having. Guess it is time to give Jaws or Microsoft some feedback. Of course, I do not know which one is causing the behavior.
Marie


-----Original Message----- From: Chris Hill
Sent: Friday, December 11, 2020 2:40 PM
To: jfw@groups.io
Subject: Problem with jaws.

I have jaws set to speak at the logon screen, and to start speaking
after I log in.  The problem I'm having is that once it starts up again,
insert-j does nothing.  If I quit jaws and restart, it works fine.  I
tried a repair, and that didn't change anything.  It looked so promising
on first boot, but I rebooted again, and it was back to problems. I'm
stumped.












moderated Re: Problem with jaws.

Chris Hill
 

I'll give that a try.  If it gets in my way I could maybe put it on another desktop or something.

On 12/11/2020 17:37, John Covici wrote:
Try not using systray and see what happens -- it is working fine here
and I am not using systray.

On Fri, 11 Dec 2020 18:27:45 -0500,
Marie wrote:
Are you running Win 10 version 20 2H? This morning my laptop and
Surface Pro both updated to the new OS and they both have the
intermittent issue you are having. Guess it is time to give Jaws
or Microsoft some feedback. Of course, I do not know which one is
causing the behavior.
Marie


-----Original Message----- From: Chris Hill
Sent: Friday, December 11, 2020 2:40 PM
To: jfw@groups.io
Subject: Problem with jaws.

I have jaws set to speak at the logon screen, and to start speaking
after I log in. The problem I'm having is that once it starts up again,
insert-j does nothing. If I quit jaws and restart, it works fine. I
tried a repair, and that didn't change anything. It looked so promising
on first boot, but I rebooted again, and it was back to problems. I'm
stumped.













moderated Re: Problem with jaws.

Chris Hill
 

No, I'm using the old sma method.  I have had this going on for a while, but I never thought to look around and find out if it is in the sys-tray when it happens.

On 12/11/2020 18:17, Bill White wrote:
Hi, Chris. Are you, by chance, using the new $90 per subscription to JAWS instead of using a 2-year SMA? If so, this is part of the problem. The new licensing scheme is causing problems for JAWS users. Try quitting JAWS with JAWS key plus F4, then restart JAWS using the shortcut on the desktop, or,

Press Windows key plus R for the run dialog.

At this dialog, type in the JAWS version you are running, E.G.

JAWS2021

This is a problem that will afflict you each time you start the computer.

I hope this helps you.

Bill White
billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Chris Hill
Sent: Friday, December 11, 2020 2:41 PM
To: jfw@groups.io
Subject: Problem with jaws.

I have jaws set to speak at the logon screen, and to start speaking
after I log in. The problem I'm having is that once it starts up again,
insert-j does nothing. If I quit jaws and restart, it works fine. I
tried a repair, and that didn't change anything. It looked so promising
on first boot, but I rebooted again, and it was back to problems. I'm
stumped.















moderated Re: Problem with jaws.

Bill White <billwhite92701@...>
 

Hi, Chris. Are you, by chance, using the new $90 per subscription to JAWS instead of using a 2-year SMA? If so, this is part of the problem. The new licensing scheme is causing problems for JAWS users. Try quitting JAWS with JAWS key plus F4, then restart JAWS using the shortcut on the desktop, or,

Press Windows key plus R for the run dialog.

At this dialog, type in the JAWS version you are running, E.G.

JAWS2021

This is a problem that will afflict you each time you start the computer.

I hope this helps you.

Bill White
billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Chris Hill
Sent: Friday, December 11, 2020 2:41 PM
To: jfw@groups.io
Subject: Problem with jaws.

I have jaws set to speak at the logon screen, and to start speaking
after I log in. The problem I'm having is that once it starts up again,
insert-j does nothing. If I quit jaws and restart, it works fine. I
tried a repair, and that didn't change anything. It looked so promising
on first boot, but I rebooted again, and it was back to problems. I'm
stumped.


moderated Re: Problem with jaws.

John Covici
 

Try not using systray and see what happens -- it is working fine here
and I am not using systray.

On Fri, 11 Dec 2020 18:27:45 -0500,
Marie wrote:

Are you running Win 10 version 20 2H? This morning my laptop and
Surface Pro both updated to the new OS and they both have the
intermittent issue you are having. Guess it is time to give Jaws
or Microsoft some feedback. Of course, I do not know which one is
causing the behavior.
Marie


-----Original Message----- From: Chris Hill
Sent: Friday, December 11, 2020 2:40 PM
To: jfw@groups.io
Subject: Problem with jaws.

I have jaws set to speak at the logon screen, and to start speaking
after I log in. The problem I'm having is that once it starts up again,
insert-j does nothing. If I quit jaws and restart, it works fine. I
tried a repair, and that didn't change anything. It looked so promising
on first boot, but I rebooted again, and it was back to problems. I'm
stumped.












--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


moderated Re: Problem with jaws.

Marie <magpie.mn@...>
 

Are you running Win 10 version 20 2H? This morning my laptop and Surface Pro both updated to the new OS and they both have the intermittent issue you are having. Guess it is time to give Jaws or Microsoft some feedback. Of course, I do not know which one is causing the behavior.
Marie

-----Original Message-----
From: Chris Hill
Sent: Friday, December 11, 2020 2:40 PM
To: jfw@groups.io
Subject: Problem with jaws.

I have jaws set to speak at the logon screen, and to start speaking
after I log in. The problem I'm having is that once it starts up again,
insert-j does nothing. If I quit jaws and restart, it works fine. I
tried a repair, and that didn't change anything. It looked so promising
on first boot, but I rebooted again, and it was back to problems. I'm
stumped.


moderated Re: Problem with jaws.

Chris Hill
 

Yep, running from systray.

On 12/11/2020 17:12, Loy wrote:
Do you have it set to run from sys tray?
----- Original Message -----
From: "Chris Hill" <hillco@earthlink.net>
To: <jfw@groups.io>
Sent: Friday, December 11, 2020 5:40 PM
Subject: Problem with jaws.


I have jaws set to speak at the logon screen, and to start speaking
after I log in. The problem I'm having is that once it starts up again,
insert-j does nothing. If I quit jaws and restart, it works fine. I
tried a repair, and that didn't change anything. It looked so promising
on first boot, but I rebooted again, and it was back to problems. I'm
stumped.











8401 - 8420 of 93104