Control windows left and right arrow is the correct key stroke. And to close one it is control windows F4



Hi,

 

I want to create multiple desktops in Windows 10.  When I press control+windows+d I am put in a new desktop.  However, I cannot figure out how to move between desktops.  I tried control+windows+left or right arrow without success.  Any help is appreciated.

On Oct 23, 2020, at 4:38 PM, Ralph Supernaw via groups.io <rhs@...> wrote:



Hi,

 

I want to create multiple desktops in Windows 10.  When I press control+windows+d I am put in a new desktop.  However, I cannot figure out how to move between desktops.  I tried control+windows+left or right arrow without success.  Any help is appreciated.

I have trouble sending posts too.  I find that if I type them out on my phone and do not dictate them, they are more likely to go, but it has been a long time since I have posted.  Good luck!

Sherri

Wow, it’s broken. Even the drop downs do not work anymore.

I have been on the next door site and get updates, and I can reply to a post but I can’t send a new post. I have gone to where it says compose a new post and done so, but then it doesn’t go anywhere. I choose the “general” category for the message, but nothing happens. Can you help me? Thanks. Judy



I just tried it after signing up.

I was able to hear the subject field and the message field after hitting the compose button in the messages list with both Jaws 2020 and Jaws 2021 beta.

I’m using the new Chromium Edge.

Maybe try that and see if it works better.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

Live long and prosper 🖖

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@...> On Behalf Of Justin Mcdevitt
Sent: Thursday, October 22, 2020 6:25 AM
To: jfw@groups.io
Subject: Access to the NextDoorsite

 

Hello Group,

 

For a number of years, I have been a member of the Nextdoor.com neighborhood site, specific to my immediate neighborhood and surrounding neighborhoods.

Until recently, I have been able to post messages to the site which I attempted to do e arlier this morning. However, as soon as I opened the message link, and tabbed to the subject field, Jaws stopped speaking. Nonetheless, I tabbed to the message body field and began composing a message. Again, JAWS was silent, so I could not read the content of what I was writing.

I have been using Google Chrome for a couple of months. Could this be a Google issue, or do I need to do a JAWS repair, try a different browser or is Nextdoor no longer accessible as it has been, necessitating bringing this to their attention.  

I would guess that some of the US members have and do use this site.

Any help is appreciated.

 

Peace to all,  Justin  

Wow, it’s broken. Even the drop downs do not work anymore.

I have been on the next door site and get updates, and I can reply to a post but I can’t send a new post. I have gone to where it says compose a new post and done so, but then it doesn’t go anywhere. I choose the “general” category for the message, but nothing happens. Can you help me? Thanks. Judy



I just tried it after signing up.

I was able to hear the subject field and the message field after hitting the compose button in the messages list with both Jaws 2020 and Jaws 2021 beta.

I’m using the new Chromium Edge.

Maybe try that and see if it works better.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

Live long and prosper 🖖

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@...> On Behalf Of Justin Mcdevitt
Sent: Thursday, October 22, 2020 6:25 AM
To: jfw@groups.io
Subject: Access to the NextDoorsite

 

Hello Group,

 

For a number of years, I have been a member of the Nextdoor.com neighborhood site, specific to my immediate neighborhood and surrounding neighborhoods.

Until recently, I have been able to post messages to the site which I attempted to do e arlier this morning. However, as soon as I opened the message link, and tabbed to the subject field, Jaws stopped speaking. Nonetheless, I tabbed to the message body field and began composing a message. Again, JAWS was silent, so I could not read the content of what I was writing.

I have been using Google Chrome for a couple of months. Could this be a Google issue, or do I need to do a JAWS repair, try a different browser or is Nextdoor no longer accessible as it has been, necessitating bringing this to their attention.  

I would guess that some of the US members have and do use this site.

Any help is appreciated.

 

Peace to all,  Justin  

Wow, it’s broken. Even the drop downs do not work anymore.

I have been on the next door site and get updates, and I can reply to a post but I can’t send a new post. I have gone to where it says compose a new post and done so, but then it doesn’t go anywhere. I choose the “general” category for the message, but nothing happens. Can you help me? Thanks. Judy



I just tried it after signing up.

I was able to hear the subject field and the message field after hitting the compose button in the messages list with both Jaws 2020 and Jaws 2021 beta.

I’m using the new Chromium Edge.

Maybe try that and see if it works better.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

Live long and prosper 🖖

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@...> On Behalf Of Justin Mcdevitt
Sent: Thursday, October 22, 2020 6:25 AM
To: jfw@groups.io
Subject: Access to the NextDoorsite

 

Hello Group,

 

For a number of years, I have been a member of the Nextdoor.com neighborhood site, specific to my immediate neighborhood and surrounding neighborhoods.

Until recently, I have been able to post messages to the site which I attempted to do e arlier this morning. However, as soon as I opened the message link, and tabbed to the subject field, Jaws stopped speaking. Nonetheless, I tabbed to the message body field and began composing a message. Again, JAWS was silent, so I could not read the content of what I was writing.

I have been using Google Chrome for a couple of months. Could this be a Google issue, or do I need to do a JAWS repair, try a different browser or is Nextdoor no longer accessible as it has been, necessitating bringing this to their attention.  

I would guess that some of the US members have and do use this site.

Any help is appreciated.

 

Peace to all,  Justin  

On Oct 23, 2020, at 1:21 PM, Abraham Sweiss <abrahamsweiss8@...> wrote:



Hello Bonnie,

 

First thing I would try is to turn off the jaws cursor with insert + z.

Second option I would test is see if the .pdf can be opened in MS Word, make the changes and then save as .pdf. 

 

I think the latest and greatest versions of Word support .pdf out of the box.  If I am wrong, certain someone on this list will correct me.

 

 

Thanks, Abraham            

 

From: Bonnie Vegiard
Sent: Friday, October 23, 2020 2:06 PM
To: main@jfw.groups.io
Subject: Fillable PDF‘s

 

Hello group,

I am using fusion 2020. I have a PDF I need to fill out for work. There is a fill and sign button on the right, and that allowed me to put a cursor in the fields on the PDF. I can tell that because I use the magnification part effusion. However, jaws will not allow me to fill anything out. Any idea of how I can go about filling out this form?

 

Thanks very much,

Bonnie Vegiard

 

 

 

 

I have been on the next door site and get updates, and I can reply to a post but I can’t send a new post. I have gone to where it says compose a new post and done so, but then it doesn’t go anywhere. I choose the “general” category for the message, but nothing happens. Can you help me? Thanks. Judy



I just tried it after signing up.

I was able to hear the subject field and the message field after hitting the compose button in the messages list with both Jaws 2020 and Jaws 2021 beta.

I’m using the new Chromium Edge.

Maybe try that and see if it works better.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

Live long and prosper 🖖

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@...> On Behalf Of Justin Mcdevitt
Sent: Thursday, October 22, 2020 6:25 AM
To: jfw@groups.io
Subject: Access to the NextDoorsite

 

Hello Group,

 

For a number of years, I have been a member of the Nextdoor.com neighborhood site, specific to my immediate neighborhood and surrounding neighborhoods.

Until recently, I have been able to post messages to the site which I attempted to do e arlier this morning. However, as soon as I opened the message link, and tabbed to the subject field, Jaws stopped speaking. Nonetheless, I tabbed to the message body field and began composing a message. Again, JAWS was silent, so I could not read the content of what I was writing.

I have been using Google Chrome for a couple of months. Could this be a Google issue, or do I need to do a JAWS repair, try a different browser or is Nextdoor no longer accessible as it has been, necessitating bringing this to their attention.  

I would guess that some of the US members have and do use this site.

Any help is appreciated.

 

Peace to all,  Justin  



I just tried it after signing up.

I was able to hear the subject field and the message field after hitting the compose button in the messages list with both Jaws 2020 and Jaws 2021 beta.

I’m using the new Chromium Edge.

Maybe try that and see if it works better.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

Live long and prosper 🖖

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@...> On Behalf Of Justin Mcdevitt
Sent: Thursday, October 22, 2020 6:25 AM
To: jfw@groups.io
Subject: Access to the NextDoorsite

 

Hello Group,

 

For a number of years, I have been a member of the Nextdoor.com neighborhood site, specific to my immediate neighborhood and surrounding neighborhoods.

Until recently, I have been able to post messages to the site which I attempted to do e arlier this morning. However, as soon as I opened the message link, and tabbed to the subject field, Jaws stopped speaking. Nonetheless, I tabbed to the message body field and began composing a message. Again, JAWS was silent, so I could not read the content of what I was writing.

I have been using Google Chrome for a couple of months. Could this be a Google issue, or do I need to do a JAWS repair, try a different browser or is Nextdoor no longer accessible as it has been, necessitating bringing this to their attention.  

I would guess that some of the US members have and do use this site.

Any help is appreciated.

 

Peace to all,  Justin  

For those of you who are using JAWS 2019 and plan to install the Windows 10 October update, the following message, posted by someone on another list, may
be of interest.  Note that this message is based solely on the personal experience of its author, Rob Kaiser.  I'm just the messenger: 

[GUI-Talk] problem with JAWS 2019 & the latest version of windows
I just got off of the phone with the Microsoft Help Desk regarding an issue.
While she was fixing my problem, she informed me that the October version of
Windows 10 doesn't work with JAWS 2019. Again, Microsoft went plowing ahead
without checking with the blind.

 
 
Rob Kaiser Email;

rcubfank@...

Gerald

Mike,

I vaguely remember some unnamed keystroke that one could use if Jaws has lost focus; that keystroke rotored through various settings.

As the result of another reply, I have tried using Firefox, but unless I can modify settings, Firefox was painfully slow in responding.  I haven’t tried Edge yet, and Chrome is the browser which is having difficulties with the website.

Greg

4:20 AM 10/23/2020

Hi everyone,

I have a website-based question; I am using Windows 10 and Jaws 2020.

I am the primary admin for a Eucharistic adoration ministry in my parish, and that ministry uses a web-based application called We Adore Him to control adorer scheduling.  I have successfully used the software since August 2018 and, after being shut down by COVID-19 since mid-March, we are preparing to open the chapel again.  As a result, I have been assisting adorers to choose an hour in the weekly calendar.  All went well until Wednesday, October 21, when the weekly calendar suddenly would not display when I arrowed to it; it now displays the hour at midnight, tells me that one slot is available, and when I arrow down in order to go to a particular hour of the day, I am at the bottom of the screen.

I am using the Jaws cursor which appears for all websites, and I have checked to be sure that my screen is maximized and in full-screen mode in Chrome.  A sighted tech-savvy friend has assisted me via Zoom and screen-share, and she tells me that the full schedule, showing adorers signed up for this or that hour--is showing on the screen.  I have contacted On Fire Media to ask them if they have been testing and that might be the reason for my issue, but they have not.  They are aware of Jaws and have a demo copy to use.  I can navigate the screen in My Dashboard if I want to update the settings in my account, but whenever I choose "Schedule", choose the particular week, I only see the first entry.

I honestly don't know if this is a Jaws focus issue or something entirely different.  Can you please remind me of the keystrokes for the rotor which a user can look at in the case of a focus issue?  Or, alternatively, do you have other suggestions?

I have tried everything I can think of.

Thank you for any ideas or suggestions,

Greg Daniel

Columbus, Ohio

Hello group,

I am using fusion 2020. I have a PDF I need to fill out for work. There is a fill and sign button on the right, and that allowed me to put a cursor in the fields on the PDF. I can tell that because I use the magnification part effusion. However, jaws will not allow me to fill anything out. Any idea of how I can go about filling out this form?

Thanks very much,

Bonnie Vegiard