1. main@jfw.groups.io
   Date   
moderated Re: clock question

Madison Martin
 

It's plugged in and it's a new computer. If it was my old one then I'd say that
you're probably right.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Pastor Gil Pries
Sent: July 14, 2020 1:56 PM
To: main@jfw.groups.io
Subject: Re: clock question

Your battery could be going dead.

Pastor Gil

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, July 14, 2020 11:38 AM
To: jfw@groups.io
Subject: clock question

Hi all,
Can someone please tell me how to change the time on my computer so that it
stays? It's off by at least 15 minutes which is rather annoying. I'm running
Jaws 2018 and Windows 10. Thanks Madison
moderated Re: clock question

Pastor Gilbert Pries
 

Your battery could be going dead.

Pastor Gil

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, July 14, 2020 11:38 AM
To: jfw@groups.io
Subject: clock question

Hi all,
Can someone please tell me how to change the time on my computer so that it
stays? It's off by at least 15 minutes which is rather annoying. I'm running
Jaws 2018 and Windows 10. Thanks Madison
moderated clock question

Madison Martin
 

Hi all,
Can someone please tell me how to change the time on my computer so that it
stays? It's off by at least 15 minutes which is rather annoying. I'm running
Jaws 2018 and Windows 10. Thanks Madison
moderated clock question

Madison Martin
 

Hi all,
Can someone please tell me how to change the time on my computer so that it
stays? It's off by at least 15 minutes which is rather annoying. I'm running
Jaws 2018 and Windows 10. Thanks Madison
moderated Re: JAWS and Zoom

Andrew Summers
 

Have you tried the f2 key on your keyboard?

That might work.

Andrew

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Miller
Sent: 14 July 2020 19:27
To: main@jfw.groups.io; jfw@groups.io
Subject: Re: JAWS and Zoom

 

Okay, but does anybody know how to get into the Gallery view?

 

 

 

Rick Miller

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of JOHN RIEHL via groups.io
Sent: Tuesday, July 14, 2020 9:48 AM
To: main@jfw.groups.io; jfw@groups.io
Subject: Re: JAWS and Zoom

 

Hi. I can answer a couple of your questions.

First, you get to the participant list by pressing alt-U. You have to tab around until you get to the list of names; then you can arrow up and down. This is somewhat buggy. They claim they’re going to fix it so that every time you get into the participant list you’ll be put in the list of names by default, but they haven’t fixed it yet.

To chat with a participant, you have to open the chat panel. You do this by pressing alt-H. That opens the chat panel. You then tab around until you find the names of participants and press enter on the name of the person you want to chat with. By default it’s set to send a chat to everyone.

Hope this helps.

John Riehl

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Miller
Sent: Tuesday, July 14, 2020 12:19 PM
To: jfw@groups.io
Subject: JAWS and Zoom

 

Dear Listers:

 

I am taking part in a class at church via Zoom.  I know how to join a meeting and how to mute and unmute my microphone, but there are a few things I am having problems with.  First, when you join a meeting, how do you get to the Gallery view using JAWS?  Also, when I get to the list of participants JAWS won’t read the list whenever I arrow up and down.  Also, I know there is a spot where it says, “Find a participant.”  I assume you enter the person’s name and then the person’s name will show.  But if you want to send a message to that participant, how do you do it?  Whenever I find the “Find Participant,” link and enter the person’s name, when I tab again it just gives me the option to either clear the search or cancel.  So what does this mean?

 

 

 

Rick Miller

 
moderated all of a sudden, jaws won't read emails in outlook 2019.

Jim Rawls
 

Hi all,

When I open a message in outlook, it says unread, and I see what the  line is, but when I open the message to read it, I don't see the top of the message. I see, the reply to whatever someone wrote, but I can't see the latest message in any group message, and as far as any personal messages go, I can't see the latest message in any thread either. If I do a jaws repair, things work for awhile, but then things go haywire again for no apparent reason.  I am running outlook windows ten, jaws  2020 on a windows ten machine.

Jim
moderated Re: Sound Card Question Windows 10

Randy Meyer
 

Randy:

 

Thank you for letting me know this is a known bug.  I will stop beating my head against the wall on this and move on to more productive items.

 

Randy Meyer

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Randy Barnett
Sent: Tuesday, July 14, 2020 12:17 PM
To: main@jfw.groups.io
Subject: Re: Sound Card Question Windows 10

 

You have to unload Jaws and reload it it's been doing this for years. If you make any change in control panel this is what you have to do and then jobs will go back to your selected device within jaws itself.

Randy Barnett


On Jul 14, 2020, at 8:03 AM, Dan Longmore <danlongmore44@...> wrote:



Hi,

  Yes, what you want to do is possible.  Not sure why you are having this situation.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Randy Meyer
Sent: Monday, July 13, 2020 8:42 PM
To: main@jfw.groups.io
Subject: Sound Card Question Windows 10

 

I am using latest Jaws 2020 and windows 10.  I have my sound blaster card selected in Jaws, but when I go to sound settings in windows and change to a different sound card, I lose Jaws speech.

 

I thought if I specifically selected the sound blaster card in Jaws, and not the windows default sound, Jaws would always speak through the sound blaster card, regardless of selection in windows 10 sound settings.

 

I am trying to route Jaws to the sound blaster card and other sounds to the built in realtek sound card.

 

Any thoughts would be appreciated.

 

Also, when I plug in any new sound output device, such as a camera, windows 10 makes this the active sound output device, effectively turning off Jaws speech.

 

Randy Meyer
moderated Re: Sound Card Question Windows 10

Randy Meyer
 

Rick:

Yes, I have speakers into my sound blaster card and headphones into my on board Realtek audio. Today, I plugged in my camera for a Zoom meeting. Jaws stopped speaking through sound blaster and tried speaking through the speaker built in to my camera. It was too quiet to hear, but fortunately, narrator was loud enough to hear through the small camera speaker.

I had to go to windows 10 sound settings and switch the focus back to the sound blaster card, and all audio came through fine.

I still have the sound blaster card checked in Jaws, which should mean that all Jaws audio comes through it, even when a different audio output is selected in windows 10 settings.

I would like to figure out how to make this work properly.

Randy Meyer

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard
Sent: Monday, July 13, 2020 8:37 PM
To: main@jfw.groups.io
Subject: Re: Sound Card Question Windows 10

Hi Randy,
Do you have a set of speakers plugged into each soundcard?

Rick
----- Original Message -----
From: "Randy Meyer" <randymeyer@charter.net>
To: <main@jfw.groups.io>
Sent: Monday, July 13, 2020 8:41 PM
Subject: Sound Card Question Windows 10


I am using latest Jaws 2020 and windows 10. I have my sound blaster card
selected in Jaws, but when I go to sound settings in windows and change to a
different sound card, I lose Jaws speech.



I thought if I specifically selected the sound blaster card in Jaws, and not
the windows default sound, Jaws would always speak through the sound blaster
card, regardless of selection in windows 10 sound settings.



I am trying to route Jaws to the sound blaster card and other sounds to the
built in realtek sound card.



Any thoughts would be appreciated.



Also, when I plug in any new sound output device, such as a camera, windows
10 makes this the active sound output device, effectively turning off Jaws
speech.



Randy Meyer
moderated Re: JAWS and Zoom

John Doering
 

Try alt plus F2.

 

HTH,

 

 

John Doering
Pricing Analyst

Office: 4147783040 Extn:4063
Mobile:
445 S Curtis Rd West Allis, WI 53214
https://ibvi.org

Industries for the Blind & Visually Impaired accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided, unless that information is subsequently confirmed in writing. If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Miller
Sent: Tuesday, July 14, 2020 1:27 PM
To: main@jfw.groups.io; jfw@groups.io
Subject: Re: JAWS and Zoom

 

Okay, but does anybody know how to get into the Gallery view?

 

 

 

Rick Miller

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of JOHN RIEHL via groups.io
Sent: Tuesday, July 14, 2020 9:48 AM
To: main@jfw.groups.io; jfw@groups.io
Subject: Re: JAWS and Zoom

 

Hi. I can answer a couple of your questions.

First, you get to the participant list by pressing alt-U. You have to tab around until you get to the list of names; then you can arrow up and down. This is somewhat buggy. They claim they’re going to fix it so that every time you get into the participant list you’ll be put in the list of names by default, but they haven’t fixed it yet.

To chat with a participant, you have to open the chat panel. You do this by pressing alt-H. That opens the chat panel. You then tab around until you find the names of participants and press enter on the name of the person you want to chat with. By default it’s set to send a chat to everyone.

Hope this helps.

John Riehl

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Miller
Sent: Tuesday, July 14, 2020 12:19 PM
To: jfw@groups.io
Subject: JAWS and Zoom

 

Dear Listers:

 

I am taking part in a class at church via Zoom.  I know how to join a meeting and how to mute and unmute my microphone, but there are a few things I am having problems with.  First, when you join a meeting, how do you get to the Gallery view using JAWS?  Also, when I get to the list of participants JAWS won’t read the list whenever I arrow up and down.  Also, I know there is a spot where it says, “Find a participant.”  I assume you enter the person’s name and then the person’s name will show.  But if you want to send a message to that participant, how do you do it?  Whenever I find the “Find Participant,” link and enter the person’s name, when I tab again it just gives me the option to either clear the search or cancel.  So what does this mean?

 

 

 

Rick Miller

 
moderated Re: JAWS and Zoom

Rick Miller
 

Okay, but does anybody know how to get into the Gallery view?

 

 

 

Rick Miller

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of JOHN RIEHL via groups.io
Sent: Tuesday, July 14, 2020 9:48 AM
To: main@jfw.groups.io; jfw@groups.io
Subject: Re: JAWS and Zoom

 

Hi. I can answer a couple of your questions.

First, you get to the participant list by pressing alt-U. You have to tab around until you get to the list of names; then you can arrow up and down. This is somewhat buggy. They claim they’re going to fix it so that every time you get into the participant list you’ll be put in the list of names by default, but they haven’t fixed it yet.

To chat with a participant, you have to open the chat panel. You do this by pressing alt-H. That opens the chat panel. You then tab around until you find the names of participants and press enter on the name of the person you want to chat with. By default it’s set to send a chat to everyone.

Hope this helps.

John Riehl

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Miller
Sent: Tuesday, July 14, 2020 12:19 PM
To: jfw@groups.io
Subject: JAWS and Zoom

 

Dear Listers:

 

I am taking part in a class at church via Zoom.  I know how to join a meeting and how to mute and unmute my microphone, but there are a few things I am having problems with.  First, when you join a meeting, how do you get to the Gallery view using JAWS?  Also, when I get to the list of participants JAWS won’t read the list whenever I arrow up and down.  Also, I know there is a spot where it says, “Find a participant.”  I assume you enter the person’s name and then the person’s name will show.  But if you want to send a message to that participant, how do you do it?  Whenever I find the “Find Participant,” link and enter the person’s name, when I tab again it just gives me the option to either clear the search or cancel.  So what does this mean?

 

 

 

Rick Miller

 
moderated Re: Sound Card Question Windows 10

Randy Barnett
 

You have to unload Jaws and reload it it's been doing this for years. If you make any change in control panel this is what you have to do and then jobs will go back to your selected device within jaws itself.

Randy Barnett

On Jul 14, 2020, at 8:03 AM, Dan Longmore <danlongmore44@...> wrote:



Hi,

  Yes, what you want to do is possible.  Not sure why you are having this situation.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Randy Meyer
Sent: Monday, July 13, 2020 8:42 PM
To: main@jfw.groups.io
Subject: Sound Card Question Windows 10

 

I am using latest Jaws 2020 and windows 10.  I have my sound blaster card selected in Jaws, but when I go to sound settings in windows and change to a different sound card, I lose Jaws speech.

 

I thought if I specifically selected the sound blaster card in Jaws, and not the windows default sound, Jaws would always speak through the sound blaster card, regardless of selection in windows 10 sound settings.

 

I am trying to route Jaws to the sound blaster card and other sounds to the built in realtek sound card.

 

Any thoughts would be appreciated.

 

Also, when I plug in any new sound output device, such as a camera, windows 10 makes this the active sound output device, effectively turning off Jaws speech.

 

Randy Meyer
moderated Re: screen curtin

Mike B
 


I don't believe so, but why not just turn your monitor or laptop screen off.

Take care.  Mike.  Sent from my iBarstool.
I don't know the key to success, but the key to failure is trying to please everybody.

----- Original Message -----
Sent: Tuesday, July 14, 2020 9:26 AM
Subject: screen curtin

HI All,

 

Is it possible to disable the feature that the screen curtin turns off when you click the mouse? I like to play swamp, but when using the mouse it deactivates the curtin.  Is this possible at all?

 

Thanks.
moderated Re: JAWS and Zoom

JOHN RIEHL
 

Hi. I can answer a couple of your questions.

First, you get to the participant list by pressing alt-U. You have to tab around until you get to the list of names; then you can arrow up and down. This is somewhat buggy. They claim they’re going to fix it so that every time you get into the participant list you’ll be put in the list of names by default, but they haven’t fixed it yet.

To chat with a participant, you have to open the chat panel. You do this by pressing alt-H. That opens the chat panel. You then tab around until you find the names of participants and press enter on the name of the person you want to chat with. By default it’s set to send a chat to everyone.

Hope this helps.

John Riehl

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Miller
Sent: Tuesday, July 14, 2020 12:19 PM
To: jfw@groups.io
Subject: JAWS and Zoom

 

Dear Listers:

 

I am taking part in a class at church via Zoom.  I know how to join a meeting and how to mute and unmute my microphone, but there are a few things I am having problems with.  First, when you join a meeting, how do you get to the Gallery view using JAWS?  Also, when I get to the list of participants JAWS won’t read the list whenever I arrow up and down.  Also, I know there is a spot where it says, “Find a participant.”  I assume you enter the person’s name and then the person’s name will show.  But if you want to send a message to that participant, how do you do it?  Whenever I find the “Find Participant,” link and enter the person’s name, when I tab again it just gives me the option to either clear the search or cancel.  So what does this mean?

 

 

 

Rick Miller

 
moderated screen curtin

Juan Hernandez
 

HI All,

 

Is it possible to disable the feature that the screen curtin turns off when you click the mouse? I like to play swamp, but when using the mouse it deactivates the curtin.  Is this possible at all?

 

Thanks.
moderated JAWS and Zoom

Rick Miller
 

Dear Listers:

 

I am taking part in a class at church via Zoom.  I know how to join a meeting and how to mute and unmute my microphone, but there are a few things I am having problems with.  First, when you join a meeting, how do you get to the Gallery view using JAWS?  Also, when I get to the list of participants JAWS won’t read the list whenever I arrow up and down.  Also, I know there is a spot where it says, “Find a participant.”  I assume you enter the person’s name and then the person’s name will show.  But if you want to send a message to that participant, how do you do it?  Whenever I find the “Find Participant,” link and enter the person’s name, when I tab again it just gives me the option to either clear the search or cancel.  So what does this mean?

 

 

 

Rick Miller

 
moderated Re: another router

Kristoffer Gustafsson
 

I tried a tp link archer mr600.
It works but the interface is a little hard.


2020-07-14 16:29 GMT+02:00, Mario <mrb620@hotmail.com>:

which router did you try (brand and model please and if it's a certain
type)?

-------- Original Message --------
From: Kristoffer Gustafsson [mailto:kg.kristoffer@gmail.com]
To: main@jfw.groups.io
Date: Tuesday, July 14, 2020, 2:14 AM
Subject: another router
Hi.
I've tested the router now.
Not very good interface, some things are easy and some things are too
hard.
for example nat forwarding.
Is there any better 4g routers?






--
Kristoffer Gustafsson
Salängsgatan 7a
tel:033-12 60 93
mobil: 0730-500934
moderated Re: Sound Card Question Windows 10

Dan Longmore
 

Hi,

  Yes, what you want to do is possible.  Not sure why you are having this situation.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Randy Meyer
Sent: Monday, July 13, 2020 8:42 PM
To: main@jfw.groups.io
Subject: Sound Card Question Windows 10

 

I am using latest Jaws 2020 and windows 10.  I have my sound blaster card selected in Jaws, but when I go to sound settings in windows and change to a different sound card, I lose Jaws speech.

 

I thought if I specifically selected the sound blaster card in Jaws, and not the windows default sound, Jaws would always speak through the sound blaster card, regardless of selection in windows 10 sound settings.

 

I am trying to route Jaws to the sound blaster card and other sounds to the built in realtek sound card.

 

Any thoughts would be appreciated.

 

Also, when I plug in any new sound output device, such as a camera, windows 10 makes this the active sound output device, effectively turning off Jaws speech.

 

Randy Meyer
moderated Re: another router

Mario
 

which router did you try (brand and model please and if it's a certain type)?

-------- Original Message --------
From: Kristoffer Gustafsson [mailto:kg.kristoffer@gmail.com]
To: main@jfw.groups.io
Date: Tuesday, July 14, 2020, 2:14 AM
Subject: another router
Hi.
I've tested the router now.
Not very good interface, some things are easy and some things are too hard.
for example nat forwarding.
Is there any better 4g routers?
moderated Re: another router

Jacob
 

I don't know if the Linux based OpenWRT or DD-WRT firmware supports any LTE router. But I use DD-WRT on my Netgear router and the accessibility is very good. Using alternative firmware is ofcourse on our own risk but it gives a lot of extra features and makes it possible for me to connect it to VPN through OpenVPN.


OZ0TE Jacob

On 2020-07-14 at 08:14 Kristoffer Gustafsson wrote:
Hi.
I've tested the router now.
Not very good interface, some things are easy and some things are too hard.
for example nat forwarding.
Is there any better 4g routers?
moderated another router

Kristoffer Gustafsson
 

Hi.
I've tested the router now.
Not very good interface, some things are easy and some things are too hard.
for example nat forwarding.
Is there any better 4g routers?


--
Kristoffer Gustafsson
Salängsgatan 7a
tel:033-12 60 93
mobil: 0730-500934
6721 - 6740 of 87043