Okay, but does anybody know how to get into the Gallery view?

Hi. I can answer a couple of your questions.

First, you get to the participant list by pressing alt-U. You have to tab around until you get to the list of names; then you can arrow up and down. This is somewhat buggy. They claim they’re going to fix it so that every time you get into the participant list you’ll be put in the list of names by default, but they haven’t fixed it yet.

To chat with a participant, you have to open the chat panel. You do this by pressing alt-H. That opens the chat panel. You then tab around until you find the names of participants and press enter on the name of the person you want to chat with. By default it’s set to send a chat to everyone.

Hope this helps.

John Riehl

Dear Listers:

I am taking part in a class at church via Zoom.  I know how to join a meeting and how to mute and unmute my microphone, but there are a few things I am having problems with.  First, when you join a meeting, how do you get to the Gallery view using JAWS?  Also, when I get to the list of participants JAWS won’t read the list whenever I arrow up and down.  Also, I know there is a spot where it says, “Find a participant.”  I assume you enter the person’s name and then the person’s name will show.  But if you want to send a message to that participant, how do you do it?  Whenever I find the “Find Participant,” link and enter the person’s name, when I tab again it just gives me the option to either clear the search or cancel.  So what does this mean?

Rick Miller

Hi. I can answer a couple of your questions.

First, you get to the participant list by pressing alt-U. You have to tab around until you get to the list of names; then you can arrow up and down. This is somewhat buggy. They claim they’re going to fix it so that every time you get into the participant list you’ll be put in the list of names by default, but they haven’t fixed it yet.

To chat with a participant, you have to open the chat panel. You do this by pressing alt-H. That opens the chat panel. You then tab around until you find the names of participants and press enter on the name of the person you want to chat with. By default it’s set to send a chat to everyone.

Hope this helps.

John Riehl

Dear Listers:

I am taking part in a class at church via Zoom.  I know how to join a meeting and how to mute and unmute my microphone, but there are a few things I am having problems with.  First, when you join a meeting, how do you get to the Gallery view using JAWS?  Also, when I get to the list of participants JAWS won’t read the list whenever I arrow up and down.  Also, I know there is a spot where it says, “Find a participant.”  I assume you enter the person’s name and then the person’s name will show.  But if you want to send a message to that participant, how do you do it?  Whenever I find the “Find Participant,” link and enter the person’s name, when I tab again it just gives me the option to either clear the search or cancel.  So what does this mean?

Rick Miller

Dear Listers:

I am taking part in a class at church via Zoom.  I know how to join a meeting and how to mute and unmute my microphone, but there are a few things I am having problems with.  First, when you join a meeting, how do you get to the Gallery view using JAWS?  Also, when I get to the list of participants JAWS won’t read the list whenever I arrow up and down.  Also, I know there is a spot where it says, “Find a participant.”  I assume you enter the person’s name and then the person’s name will show.  But if you want to send a message to that participant, how do you do it?  Whenever I find the “Find Participant,” link and enter the person’s name, when I tab again it just gives me the option to either clear the search or cancel.  So what does this mean?

Rick Miller

which router did you try (brand and model please and if it's a certain
type)?

-------- Original Message --------
From: Kristoffer Gustafsson [mailto:kg.kristoffer@gmail.com]
To: main@jfw.groups.io
Date: Tuesday, July 14, 2020, 2:14 AM
Subject: another router
Hi.
I've tested the router now.
Not very good interface, some things are easy and some things are too
hard.
for example nat forwarding.
Is there any better 4g routers?

Hi.
I've tested the router now.
Not very good interface, some things are easy and some things are too hard.
for example nat forwarding.
Is there any better 4g routers?

78.02 which is now the latest version, also crashes, I mostly use the new Chromium based Edge for the most part.

 

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Sunday, July 12, 2020 9:24 AM
To: main@jfw.groups.io
Subject: Re: Any thoughts on getting latest version of Firefox (78.0.1) to work better with older JFW (2018)?

 

It crashed occasionally before 78.0.1 but it was a tolerable level of wankiness. This update is definitely unveiling something nasty. Mozilla apparently had a twitter back and forth trying to reproduce this bug and it was a tricky one to both find and solve. I guess we wait for next update, which with FF…should be soon.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shirley Tracy
Sent: July 12, 2020 4:59 AM
To: main@jfw.groups.io; jfw@groups.io
Subject: Re: Any thoughts on getting latest version of Firefox (78.0.1) to work better with older JFW (2018)?

 

For what it’s worth, I have JAWS 2020 and I have stopped using Firefox for the most part because it crashes frequently. I spoke with tech support at Freedom Scientific who told me they are well aware of it.

 

 

Shirley Tracy

 

From: JM Casey
Sent: Saturday, July 11, 2020 2:43 PM
To: jfw@groups.io
Subject: Any thoughts on getting latest version of Firefox (78.0.1) to work better with older JFW (2018)?

 

Hey folks. Yes, I know JAWS 2018 is behind the curve, now, and that an upgrade would be beneficial. However, I’m not in a position to upgrade at this time. At the risk of running a huge struggle to continue using outdated software, I would like to know if anybody has any ideas of configuration settings that might make Firefox less crashy using this screen-reader. I know its’ an issue between interaction with JAWS and firefox and, frankly, always has been since the advent of Quantum. I tested this with nVDA (2019.3 and 2020.1) and it’s a lot less crashy. In fact I have failed to make Firefox crash even once using this other screen-reader. I know some users of JAWS 2020 have reported crashes, too, but I’m unable to test that currently and at a guess, newer versions of JFW should probably work better as well as NVDA. Anyway, since I’m not looking to downgrade firefox and not quite ready to either upgrade or give up JFW for the web browsing experience, in part because it works so nicely with my Focus braille display, just wondering if there are any flags/options I can alter in about:preferences or about:config (firefox’s “hidden” advanced settings page containing literally thousands of configurable options) that might help me have a smoother experience. Right now, since FF updated to 78.0.1 a week or two ago, everything from wikipedia pages to my old wisp’s webmail is crashing tabs. This only happens when jFW is running.

 

NB: I’m aware of other browsers  and use them, so no need to suggest just switching browsers. Thanks!!

 

 

 

Hi, Tom.

1. Press Windows key plus R for Run.

2. Enter:

shell:appsfolder

3. From the resultant list of programs, choose Zoom.

4. Press Applications key or SHIFT plus F10.

5. Arrow to Create Shortcut and press ENTER.

6. If you get a prompt that says Windows Can't create a shortcut here, put it on the desktop instead, Answer Yes.

Now there will be a shortcut for zoom. It may be Start Zoom

Hello, everyone.

I know I’ve done this before, but am having a brain lapse here.

I have the Zoom app on the start menu on my Windows 10 PC, but would like an icon on my desktop as well.

I recall that the process for doing this is different in Windows 10, than it was in Windows 7.

Can someone refresh my memory as to how to do this?

I can find the program in the all apps list, but can’t figure out how to create the desktop icon.

Thanks in advance.

Tom Behler