Date   

moderated Re: Teamviewer

David Ingram
 

are there jaws scripts for TeamViewer version 15x?

-----Original Message-----
From: Mario <mrb620@hotmail.com>
Sent: Jun 25, 2020 1:14 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer

Richard, check out https://dlee.org/teamviewer/ for scripts for JAWS.


-------- Original Message --------
From: Richard Turner [mailto:richardturner42@outlook.com]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Thursday, June 25, 2020, 1:47 PM
Subject: Teamviewer
Thanks, I’m sure this will help if I need to use it again.  I am using
the free version.

The combination of Skype and Teamviewer allowed him to direct me to what
I needed to do.

But, Teamviewer could use some help and/or Jaws scripts.

Richard

"He that cannot forgive others breaks the bridge over which he must pass
himself,” and we forget that only grace can break the cycle of ancient
hatreds among peoples. (It is notable that while I have regretted not
granting grace to others, I’ve never once regretted extending it.)" -
Edward Herbert

*From:* main@jfw.groups.io <main@jfw.groups.io> *On Behalf Of *Milton Ota
*Sent:* Thursday, June 25, 2020 8:42 AM
*To:* main@jfw.groups.io
*Subject:* Re: Teamviewer

Hi Richard,

When you first open Team viewer, you will need to tab down to a field
that says: “Your ID:” and provide the person that will control your
computer the digits in that field.

Tab to: “Password: and provide the password that is generated.

This only will work if you are using the Team Viewer as a free version.
I’m not sure what happens if you purchased a license.

Once the person connecting to your computer has entered those pieces of
information they should be connected and be able to take over. You
should be on the phone if there is something specific that you are
looking for help with if the person is not very familiar with your
computer setup. You don’t have to unload JAWS and if you need to take
control, the helper can let you take over and you don’t need to disconnect.

I hope this is helpful information.

Milton

*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Richard
Turner
*Sent:* Thursday, June 25, 2020 10:21 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: Teamviewer

I would like to know that as well.

Teamviewer is not very accessible at all, and the Jaws command to
identify the version just says “version” with no information.

I couldn’t figure out how to give access to a technician to take control
of my computer and could barely deal with the connection.

At least, between Teamviewer and Skype he was able to direct me to the
braille driver that was getting in the way.

But I would say that whatever the current version of Teamviewer is, it
isn’t very accessible.

Richard

"He that cannot forgive others breaks the bridge over which he must pass
himself,” and we forget that only grace can break the cycle of ancient
hatreds among peoples. (It is notable that while I have regretted not
granting grace to others, I’ve never once regretted extending it.)" -
Edward Herbert

*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Sieghard
Weitzel
*Sent:* Thursday, June 25, 2020 7:58 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: Teamviewer

Which version of Teamviewer are you using that is accessible, there seem
to be many and I know even technical support people often ask to go to
the Teamviewer website and ask you to download an older versio.

*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Dan Longmore
*Sent:* Wednesday, June 24, 2020 9:02 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: Teamviewer

Richard,

  Team Viewer and JAWS 2020 was accessible when used a few weeks ago.

Dan

*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Richard
Turner
*Sent:* Wednesday, June 24, 2020 10:40 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Teamviewer

I need to use Teamviewer to get help on a braille display from the company.

Are there scripts for the latest Teamviewer and Jaws 2020?

The Doug Lee scripts don’t think I have any compatible Jaws, but then
again, those scripts are from 2015.

Any help would be appreciated.

Richard

"He that cannot forgive others breaks the bridge over which he must pass
himself,” and we forget that only grace can break the cycle of ancient
hatreds among peoples. (It is notable that while I have regretted not
granting grace to others, I’ve never once regretted extending it.)" -
Edward Herbert






moderated Re: Teamviewer

Richard Turner
 

Right, I tried those and they were written 5 years ago and did not see my Jaws version so cannot install and probably wouldn't help much.



Richard
"He that cannot forgive others breaks the bridge over which he must pass himself," and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I've never once regretted extending it.)" - Edward Herbert

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Thursday, June 25, 2020 11:14 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

Richard, check out https://eur06.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdlee.org%2Fteamviewer%2F&;data=02%7C01%7C%7Cf24d7ff872194a03117c08d81933981e%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637287056665430727&amp;sdata=Y2Z1yPQNWfYBuI1TvkCAGdZWYo253a9PpaJyKOY7has%3D&amp;reserved=0 for scripts for JAWS.


-------- Original Message --------
From: Richard Turner [mailto:richardturner42@outlook.com]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Thursday, June 25, 2020, 1:47 PM
Subject: Teamviewer
Thanks, I'm sure this will help if I need to use it again.  I am using the free version.

The combination of Skype and Teamviewer allowed him to direct me to what I needed to do.

But, Teamviewer could use some help and/or Jaws scripts.

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself," and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I've never once regretted extending it.)" - Edward Herbert

*From:* main@jfw.groups.io <main@jfw.groups.io> *On Behalf Of *Milton Ota
*Sent:* Thursday, June 25, 2020 8:42 AM
*To:* main@jfw.groups.io
*Subject:* Re: Teamviewer

Hi Richard,

When you first open Team viewer, you will need to tab down to a field that says: "Your ID:" and provide the person that will control your computer the digits in that field.

Tab to: "Password: and provide the password that is generated.

This only will work if you are using the Team Viewer as a free version.
I'm not sure what happens if you purchased a license.

Once the person connecting to your computer has entered those pieces of information they should be connected and be able to take over. You should be on the phone if there is something specific that you are looking for help with if the person is not very familiar with your computer setup. You don't have to unload JAWS and if you need to take control, the helper can let you take over and you don't need to disconnect.

I hope this is helpful information.

Milton

*From:* main@jfw.groups.io <mailto:main@jfw.groups.io> <main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Richard Turner
*Sent:* Thursday, June 25, 2020 10:21 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: Teamviewer

I would like to know that as well.

Teamviewer is not very accessible at all, and the Jaws command to identify the version just says "version" with no information.

I couldn't figure out how to give access to a technician to take control of my computer and could barely deal with the connection.

At least, between Teamviewer and Skype he was able to direct me to the braille driver that was getting in the way.

But I would say that whatever the current version of Teamviewer is, it isn't very accessible.

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself," and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I've never once regretted extending it.)" - Edward Herbert

*From:* main@jfw.groups.io <mailto:main@jfw.groups.io> <main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Sieghard Weitzel
*Sent:* Thursday, June 25, 2020 7:58 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: Teamviewer

Which version of Teamviewer are you using that is accessible, there seem to be many and I know even technical support people often ask to go to the Teamviewer website and ask you to download an older versio.

*From:* main@jfw.groups.io <mailto:main@jfw.groups.io> <main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Dan Longmore
*Sent:* Wednesday, June 24, 2020 9:02 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: Teamviewer

Richard,

  Team Viewer and JAWS 2020 was accessible when used a few weeks ago.

Dan

*From:* main@jfw.groups.io <mailto:main@jfw.groups.io> <main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Richard Turner
*Sent:* Wednesday, June 24, 2020 10:40 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Teamviewer

I need to use Teamviewer to get help on a braille display from the company.

Are there scripts for the latest Teamviewer and Jaws 2020?

The Doug Lee scripts don't think I have any compatible Jaws, but then again, those scripts are from 2015.

Any help would be appreciated.

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself," and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I've never once regretted extending it.)" - Edward Herbert


moderated Re: Teamviewer

Mario
 

Richard, check out https://dlee.org/teamviewer/ for scripts for JAWS.

-------- Original Message --------
From: Richard Turner [mailto:richardturner42@outlook.com]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Thursday, June 25, 2020, 1:47 PM
Subject: Teamviewer
Thanks, I’m sure this will help if I need to use it again.  I am using
the free version.

The combination of Skype and Teamviewer allowed him to direct me to what
I needed to do.

But, Teamviewer could use some help and/or Jaws scripts.

Richard

"He that cannot forgive others breaks the bridge over which he must pass
himself,” and we forget that only grace can break the cycle of ancient
hatreds among peoples. (It is notable that while I have regretted not
granting grace to others, I’ve never once regretted extending it.)" -
Edward Herbert

*From:* main@jfw.groups.io <main@jfw.groups.io> *On Behalf Of *Milton Ota
*Sent:* Thursday, June 25, 2020 8:42 AM
*To:* main@jfw.groups.io
*Subject:* Re: Teamviewer

Hi Richard,

When you first open Team viewer, you will need to tab down to a field
that says: “Your ID:” and provide the person that will control your
computer the digits in that field.

Tab to: “Password: and provide the password that is generated.

This only will work if you are using the Team Viewer as a free version.
I’m not sure what happens if you purchased a license.

Once the person connecting to your computer has entered those pieces of
information they should be connected and be able to take over. You
should be on the phone if there is something specific that you are
looking for help with if the person is not very familiar with your
computer setup. You don’t have to unload JAWS and if you need to take
control, the helper can let you take over and you don’t need to disconnect.

I hope this is helpful information.

Milton

*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Richard
Turner
*Sent:* Thursday, June 25, 2020 10:21 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: Teamviewer

I would like to know that as well.

Teamviewer is not very accessible at all, and the Jaws command to
identify the version just says “version” with no information.

I couldn’t figure out how to give access to a technician to take control
of my computer and could barely deal with the connection.

At least, between Teamviewer and Skype he was able to direct me to the
braille driver that was getting in the way.

But I would say that whatever the current version of Teamviewer is, it
isn’t very accessible.

Richard

"He that cannot forgive others breaks the bridge over which he must pass
himself,” and we forget that only grace can break the cycle of ancient
hatreds among peoples. (It is notable that while I have regretted not
granting grace to others, I’ve never once regretted extending it.)" -
Edward Herbert

*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Sieghard
Weitzel
*Sent:* Thursday, June 25, 2020 7:58 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: Teamviewer

Which version of Teamviewer are you using that is accessible, there seem
to be many and I know even technical support people often ask to go to
the Teamviewer website and ask you to download an older versio.

*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Dan Longmore
*Sent:* Wednesday, June 24, 2020 9:02 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: Teamviewer

Richard,

  Team Viewer and JAWS 2020 was accessible when used a few weeks ago.

Dan

*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Richard
Turner
*Sent:* Wednesday, June 24, 2020 10:40 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Teamviewer

I need to use Teamviewer to get help on a braille display from the company.

Are there scripts for the latest Teamviewer and Jaws 2020?

The Doug Lee scripts don’t think I have any compatible Jaws, but then
again, those scripts are from 2015.

Any help would be appreciated.

Richard

"He that cannot forgive others breaks the bridge over which he must pass
himself,” and we forget that only grace can break the cycle of ancient
hatreds among peoples. (It is notable that while I have regretted not
granting grace to others, I’ve never once regretted extending it.)" -
Edward Herbert


moderated Re: FileZilla list view

Richard Turner
 

I have not run into this,  but I only use it to manage web sites I support.

Did you check the View settings?

 

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of tom x
Sent: Tuesday, June 23, 2020 10:59 PM
To: main@jfw.groups.io
Subject: FileZilla list view

 

Hi,

 

Using latest FileZilla and Jaws along with W10 64 bit but not with the 2004 update as yet.

 

I use FileZilla to visit an FTP site with lots of folders, including folders within folders,  and have a problem with  FileZilla sometimes starting in tree view rather than the desired list view. Shutting down F Z and restarting once or twice often gives the desired result. 

 

Is there a command in FileZilla where the display can be forced to change from tree view to list view without shutting down the program and starting again?

 

Thanks

Tom

 

 

 

When tree view is encounted  the only way seems to be to shut down FileZilla and restart it again. 


moderated Re: Teamviewer

Richard Turner
 

Thanks, I’m sure this will help if I need to use it again.  I am using the free version.

 

The combination of Skype and Teamviewer allowed him to direct me to what I needed to do.

But, Teamviewer could use some help and/or Jaws scripts.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota
Sent: Thursday, June 25, 2020 8:42 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Hi Richard,

 

When you first open Team viewer, you will need to tab down to a field that says: “Your ID:” and provide the person that will control your computer the digits in that field.

 

Tab to: “Password: and provide the password that is generated.

 

This only will work if you are using the Team Viewer as a free version. I’m not sure what happens if you purchased a license.

 

Once the person connecting to your computer has entered those pieces of information they should be connected and be able to take over. You should be on the phone if there is something specific that you are looking for help with if the person is not very familiar with your computer setup. You don’t have to unload JAWS and if you need to take control, the helper can let you take over and you don’t need to disconnect.

 

I hope this is helpful information.

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Thursday, June 25, 2020 10:21 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

I would like to know that as well.

Teamviewer is not very accessible at all, and the Jaws command to identify the version just says “version” with no information.

I couldn’t figure out how to give access to a technician to take control of my computer and could barely deal with the connection.

At least, between Teamviewer and Skype he was able to direct me to the braille driver that was getting in the way.

 

But I would say that whatever the current version of Teamviewer is, it isn’t very accessible.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Thursday, June 25, 2020 7:58 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Which version of Teamviewer are you using that is accessible, there seem to be many and I know even technical support people often ask to go to the Teamviewer website and ask you to download an older versio.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Wednesday, June 24, 2020 9:02 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Richard,

  Team Viewer and JAWS 2020 was accessible when used a few weeks ago.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Wednesday, June 24, 2020 10:40 AM
To: main@jfw.groups.io
Subject: Teamviewer

 

I need to use Teamviewer to get help on a braille display from the company.

Are there scripts for the latest Teamviewer and Jaws 2020?

The Doug Lee scripts don’t think I have any compatible Jaws, but then again, those scripts are from 2015.

 

Any help would be appreciated.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 


moderated Re: Orbit Reader 20 Plus F1 through F10 key emulation not working

Richard Turner
 

Yes, I just confirmed it on my Orbit Reader 20 plus.
I forwarded Ann's note along with my comments to the tech team at Orbit.



Richard
"He that cannot forgive others breaks the bridge over which he must pass himself," and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I've never once regretted extending it.)" - Edward Herbert

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of ratshtron
Sent: Thursday, June 25, 2020 10:43 AM
To: main@jfw.groups.io
Subject: Re: Orbit Reader 20 Plus F1 through F10 key emulation not working

you are using the nemith code numbers for the numbers as dot 2 for the number 1, dots 23 for the number 2 and so forth along with the dot 7?


Legend has it that on Thursday 6/25/2020 12:16 PM, ann said:
----------------------------------------
HI folks,


I have an Orbit Reader 20 Plus braille display, running with latest
Jaws2020 on Windows 10. From it's own manual it says that pressing
the Dot 7 Plus computer braille 1 through 0 equals F1-F10. The keys
that are supposed to emulate the F1 through F10 keys do not work at
all, not in any application. Or is this something on my own system I
need to change to get this to work??


Thanks,

~Ann


----------------------------------------


moderated Re: Orbit Reader 20 Plus F1 through F10 key emulation not working

ratshtron
 

you are using the nemith code numbers for the numbers as dot 2 for the number 1, dots 23 for the number 2 and so forth along with the dot 7?


Legend has it that on Thursday 6/25/2020 12:16 PM, ann said:
----------------------------------------
HI folks,


I have an Orbit Reader 20 Plus braille display, running with latest Jaws2020 on Windows 10. From it's own manual it says that pressing the Dot 7 Plus computer braille 1 through 0 equals F1-F10. The keys that are supposed to emulate the F1 through F10 keys do not work at all, not in any application. Or is this something on my own system I need to change to get this to work??


Thanks,

~Ann


----------------------------------------


moderated Orbit Reader 20 Plus F1 through F10 key emulation not working

ann
 

HI folks,


I have an Orbit Reader 20 Plus braille display, running with latest Jaws2020 on Windows 10. From it's own manual it says that pressing the Dot 7 Plus computer braille 1 through 0 equals F1-F10. The keys that are supposed to emulate the F1 through F10 keys do not work at all, not in any application. Or is this something on my own system I need to change to get this to work??


Thanks,

~Ann


moderated Re: Finding a File Using JAWS

 

On Thu, Jun 25, 2020 at 11:52 AM, Rick Miller wrote:
But if you want to find out what folder that file or program is in, then what do you do?
If you mean one you've just downloaded in Chrome, then use the Open Folder command for that file.

Any file, once File Explorer is open and there is focus on that file, can have its full path (which includes its name at the end) using the Copy Path command that's part of File Explorer itself.  ALT+H,CP.

As an example, this is what I get for one of my downloaded files (and it includes the double quotes):  "C:\Users\brite\Downloads\0314policyforumff.pdf"
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

The purpose of education is not to validate ignorance but to overcome it.
       ~ Lawrence Krauss


moderated Re: Finding a File Using JAWS

Rick Miller
 

But if you want to find out what folder that file or program is in, then what do you do?

 

 

 

Rick Miller

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Shan Noyes
Sent: Thursday, June 25, 2020 6:40 AM
To: main@jfw.groups.io; jfw@groups.io
Subject: Re: Finding a File Using JAWS

 

When I am using chrome and do a download after the download has completed when chrome is in focus do a shift f6 and that puts you on the name of the downloaded file.  So because I work a lot with log analysis programs like splunk and the downloaded files are csv files then all I do is when the filename is in focus hit the space bar and the file is opened up.

 

But again that is with chrome.

 

Have a good day.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Miller via groups.io
Sent: Wednesday, June 24, 2020 7:40 PM
To: jfw@groups.io
Subject: Finding a File Using JAWS

 

-------------------------------------------------------------
WARNING, this email originated from outside of SaskTel.
Do not click links or open attachments unless you trust the sender and believe the contents are safe.
--------------------------------------------------------------

Dear Listers:

 

I currently am running the latest version of Windows and am also using the latest version of JAWS.  If you download something without designating a path, how do you go about finding out what folder your download is in?  I know that you search for something by opening up the Search box by pressing the Alt key, but although this finds the file you are looking for it doesn’t tell you what folder that file is in.

 

 

 

Rick Miller

 

NOTICE: This confidential e-mail message is only for the intended recipients. If you are not the intended recipient, be advised that disclosing, copying, distributing, or any other use of this message, is strictly prohibited. In such case, please destroy this message and notify the sender.


moderated Re: how do I schedule a delayed delivery of email using office 365 JAWS 2020 Windows 10

Sharon Ballantyne
 

Alt p o pworks for Office 365. Thank-you so much.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of NFB Lab 4
Sent: Thursday, June 25, 2020 9:20 AM
To: main@jfw.groups.io
Subject: Re: how do I schedule a delayed delivery of email using office 365 JAWS 2020 Windows 10

 

I am not sure about office 365, but try the keystroke alt P O P



On Jun 25, 2020, at 7:34 AM, Sharon Ballantyne <revsharon@...> wrote:



Hi,

I can’t find any schedule delivery under options.

How do I schedule a delayed delivery for email message I create using Microsoft Office 365? I am running the latest Jaws 2020 and Windows 10?

 

Thank-you for any advice.

Sharon Ballantyne

 


moderated Re: Teamviewer

Milton Ota
 

Hi Richard,

 

When you first open Team viewer, you will need to tab down to a field that says: “Your ID:” and provide the person that will control your computer the digits in that field.

 

Tab to: “Password: and provide the password that is generated.

 

This only will work if you are using the Team Viewer as a free version. I’m not sure what happens if you purchased a license.

 

Once the person connecting to your computer has entered those pieces of information they should be connected and be able to take over. You should be on the phone if there is something specific that you are looking for help with if the person is not very familiar with your computer setup. You don’t have to unload JAWS and if you need to take control, the helper can let you take over and you don’t need to disconnect.

 

I hope this is helpful information.

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Thursday, June 25, 2020 10:21 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

I would like to know that as well.

Teamviewer is not very accessible at all, and the Jaws command to identify the version just says “version” with no information.

I couldn’t figure out how to give access to a technician to take control of my computer and could barely deal with the connection.

At least, between Teamviewer and Skype he was able to direct me to the braille driver that was getting in the way.

 

But I would say that whatever the current version of Teamviewer is, it isn’t very accessible.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Thursday, June 25, 2020 7:58 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Which version of Teamviewer are you using that is accessible, there seem to be many and I know even technical support people often ask to go to the Teamviewer website and ask you to download an older versio.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Wednesday, June 24, 2020 9:02 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Richard,

  Team Viewer and JAWS 2020 was accessible when used a few weeks ago.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Wednesday, June 24, 2020 10:40 AM
To: main@jfw.groups.io
Subject: Teamviewer

 

I need to use Teamviewer to get help on a braille display from the company.

Are there scripts for the latest Teamviewer and Jaws 2020?

The Doug Lee scripts don’t think I have any compatible Jaws, but then again, those scripts are from 2015.

 

Any help would be appreciated.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 


moderated Re: Teamviewer

Richard Turner
 

I would like to know that as well.

Teamviewer is not very accessible at all, and the Jaws command to identify the version just says “version” with no information.

I couldn’t figure out how to give access to a technician to take control of my computer and could barely deal with the connection.

At least, between Teamviewer and Skype he was able to direct me to the braille driver that was getting in the way.

 

But I would say that whatever the current version of Teamviewer is, it isn’t very accessible.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Thursday, June 25, 2020 7:58 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Which version of Teamviewer are you using that is accessible, there seem to be many and I know even technical support people often ask to go to the Teamviewer website and ask you to download an older versio.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Wednesday, June 24, 2020 9:02 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Richard,

  Team Viewer and JAWS 2020 was accessible when used a few weeks ago.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Wednesday, June 24, 2020 10:40 AM
To: main@jfw.groups.io
Subject: Teamviewer

 

I need to use Teamviewer to get help on a braille display from the company.

Are there scripts for the latest Teamviewer and Jaws 2020?

The Doug Lee scripts don’t think I have any compatible Jaws, but then again, those scripts are from 2015.

 

Any help would be appreciated.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 


moderated Re: Finding a File Using JAWS

Shan Noyes
 

Yes, sorry about that,  I just read some of the other responses

Have a good day.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White via groups.io
Sent: Thursday, June 25, 2020 8:56 AM
To: main@jfw.groups.io
Subject: Re: Finding a File Using JAWS

 

-------------------------------------------------------------
WARNING, this email originated from outside of SaskTel.
Do not click links or open attachments unless you trust the sender and believe the contents are safe.
--------------------------------------------------------------

Hi, Shan. He's not necessarily talking about finding a file he just downloaded, although that can be the case, if, for some reason, the browser isn't saving downloaded files to the Downloads folder. It's trying to find a file on your system that has been moved to another folder, and you can't remember where it has been moved. Even then, the trick is trying to find out which folder has been opened, even if you use the trick in Chrome to which you are referring.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Shan Noyes
Sent: Thursday, June 25, 2020 6:40 AM
To: main@jfw.groups.io; jfw@groups.io
Subject: Re: Finding a File Using JAWS

 

When I am using chrome and do a download after the download has completed when chrome is in focus do a shift f6 and that puts you on the name of the downloaded file.  So because I work a lot with log analysis programs like splunk and the downloaded files are csv files then all I do is when the filename is in focus hit the space bar and the file is opened up.

 

But again that is with chrome.

 

Have a good day.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Miller via groups.io
Sent: Wednesday, June 24, 2020 7:40 PM
To: jfw@groups.io
Subject: Finding a File Using JAWS

 

-------------------------------------------------------------
WARNING, this email originated from outside of SaskTel.
Do not click links or open attachments unless you trust the sender and believe the contents are safe.
--------------------------------------------------------------

Dear Listers:

 

I currently am running the latest version of Windows and am also using the latest version of JAWS.  If you download something without designating a path, how do you go about finding out what folder your download is in?  I know that you search for something by opening up the Search box by pressing the Alt key, but although this finds the file you are looking for it doesn’t tell you what folder that file is in.

 

 

 

Rick Miller

 

NOTICE: This confidential e-mail message is only for the intended recipients. If you are not the intended recipient, be advised that disclosing, copying, distributing, or any other use of this message, is strictly prohibited. In such case, please destroy this message and notify the sender.

NOTICE: This confidential e-mail message is only for the intended recipients. If you are not the intended recipient, be advised that disclosing, copying, distributing, or any other use of this message, is strictly prohibited. In such case, please destroy this message and notify the sender.


moderated Re: Teamviewer

 

Which version of Teamviewer are you using that is accessible, there seem to be many and I know even technical support people often ask to go to the Teamviewer website and ask you to download an older versio.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Wednesday, June 24, 2020 9:02 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Richard,

  Team Viewer and JAWS 2020 was accessible when used a few weeks ago.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Wednesday, June 24, 2020 10:40 AM
To: main@jfw.groups.io
Subject: Teamviewer

 

I need to use Teamviewer to get help on a braille display from the company.

Are there scripts for the latest Teamviewer and Jaws 2020?

The Doug Lee scripts don’t think I have any compatible Jaws, but then again, those scripts are from 2015.

 

Any help would be appreciated.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 


moderated Re: Finding a File Using JAWS

Bill White <billwhite92701@...>
 

Hi, Shan. He's not necessarily talking about finding a file he just downloaded, although that can be the case, if, for some reason, the browser isn't saving downloaded files to the Downloads folder. It's trying to find a file on your system that has been moved to another folder, and you can't remember where it has been moved. Even then, the trick is trying to find out which folder has been opened, even if you use the trick in Chrome to which you are referring.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Shan Noyes
Sent: Thursday, June 25, 2020 6:40 AM
To: main@jfw.groups.io; jfw@groups.io
Subject: Re: Finding a File Using JAWS

 

When I am using chrome and do a download after the download has completed when chrome is in focus do a shift f6 and that puts you on the name of the downloaded file.  So because I work a lot with log analysis programs like splunk and the downloaded files are csv files then all I do is when the filename is in focus hit the space bar and the file is opened up.

 

But again that is with chrome.

 

Have a good day.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Miller via groups.io
Sent: Wednesday, June 24, 2020 7:40 PM
To: jfw@groups.io
Subject: Finding a File Using JAWS

 

-------------------------------------------------------------
WARNING, this email originated from outside of SaskTel.
Do not click links or open attachments unless you trust the sender and believe the contents are safe.
--------------------------------------------------------------

Dear Listers:

 

I currently am running the latest version of Windows and am also using the latest version of JAWS.  If you download something without designating a path, how do you go about finding out what folder your download is in?  I know that you search for something by opening up the Search box by pressing the Alt key, but although this finds the file you are looking for it doesn’t tell you what folder that file is in.

 

 

 

Rick Miller

 

NOTICE: This confidential e-mail message is only for the intended recipients. If you are not the intended recipient, be advised that disclosing, copying, distributing, or any other use of this message, is strictly prohibited. In such case, please destroy this message and notify the sender.


moderated Re: Jaws and old Braille focus 40

Milton Ota
 

Hello,

 

You are describing what is now known as the Classic Focus series of display. Here is the page where you can find the documentation and user guide for your model.

 

https://support.freedomscientific.com/Products/Blindness/BrailleDisplayDocumentation#Focus

 

 

Milton

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of david
Sent: Thursday, June 25, 2020 8:13 AM
To: main@jfw.groups.io
Subject: Jaws and old Braille focus 40

 

Good morning all;

I received an e-mail asking me about an old braille focus 40.

apparently this has two  wheels one on each end, I seem to remember they're called wiz wheels,

I think I read when computer boots up he sees focus 40 370. anyway, does anyone know what the various buttons do?

how to navigate?

this is just a USB connection. plug and play.

In advance thanks for the help.

 

 

       The impossible is the untried,  Never under estimate the power of a dream.

 


moderated Re: Finding a File Using JAWS

Shan Noyes
 

When I am using chrome and do a download after the download has completed when chrome is in focus do a shift f6 and that puts you on the name of the downloaded file.  So because I work a lot with log analysis programs like splunk and the downloaded files are csv files then all I do is when the filename is in focus hit the space bar and the file is opened up.

 

But again that is with chrome.

 

Have a good day.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Miller via groups.io
Sent: Wednesday, June 24, 2020 7:40 PM
To: jfw@groups.io
Subject: Finding a File Using JAWS

 

-------------------------------------------------------------
WARNING, this email originated from outside of SaskTel.
Do not click links or open attachments unless you trust the sender and believe the contents are safe.
--------------------------------------------------------------

Dear Listers:

 

I currently am running the latest version of Windows and am also using the latest version of JAWS.  If you download something without designating a path, how do you go about finding out what folder your download is in?  I know that you search for something by opening up the Search box by pressing the Alt key, but although this finds the file you are looking for it doesn’t tell you what folder that file is in.

 

 

 

Rick Miller

 

NOTICE: This confidential e-mail message is only for the intended recipients. If you are not the intended recipient, be advised that disclosing, copying, distributing, or any other use of this message, is strictly prohibited. In such case, please destroy this message and notify the sender.


moderated Re: how do I schedule a delayed delivery of email using office 365 JAWS 2020 Windows 10

NFB Lab 4
 

I am not sure about office 365, but try the keystroke alt P O P


On Jun 25, 2020, at 7:34 AM, Sharon Ballantyne <revsharon@...> wrote:



Hi,

I can’t find any schedule delivery under options.

How do I schedule a delayed delivery for email message I create using Microsoft Office 365? I am running the latest Jaws 2020 and Windows 10?

 

Thank-you for any advice.

Sharon Ballantyne

 


moderated Jaws and old Braille focus 40

david
 

Good morning all;

I received an e-mail asking me about an old braille focus 40.

apparently this has two  wheels one on each end, I seem to remember they're called wiz wheels,

I think I read when computer boots up he sees focus 40 370. anyway, does anyone know what the various buttons do?

how to navigate?

this is just a USB connection. plug and play.

In advance thanks for the help.

 

 

       The impossible is the untried,  Never under estimate the power of a dream.

 

12521 - 12540 of 92298