Date   

moderated Meta data for music tracks

Marty Hutchings
 

I have a lot of music tracks that do not have proper meta data information associated with them.  Is there an accessible program for easily adding this information?


moderated Re: the first of 2 questions

Shirley Tracy
 

Thanks, Mike. I like your suggested change in settings, because I’d prefer correcting my spelling after I have finished. Otherwise, the corrections interrupt my flow of thoughts. But, unfortunately, the computer is still making some changes on my behalf which I haven’t authorized. I don’t even know about them. For example, If I key in 2 hyphens to make a dash, the computer changes it to an n dash without telling me. That’s not so bad, but that’s the best example I can give you right now.

 

Perhaps I will look into Word settings just as someone else suggested.

 

Shirley Tracy

 

From: Mike B
Sent: Monday, June 22, 2020 11:55 AM
To: main@jfw.groups.io
Subject: Re: the first of 2 questions

 

Hi Shirley,

 

Try the following to see if this'll help:

1. Open the Settings Center with, Insert + 6, on the number row, now press, control, shift + D, to open default all applications.

 

2. Down arrow to, Text processing closed right arrow to open.

 

3. Down arrow to, Proofing closed, right arrow to open.

 

4. Down arrow 1 time to, Detect spelling while navigating..., now press the
spacebar until Jaws reports, Off.

 

5. Tab to,apply, press the spacebar, tab to, Okay, press enter to save / close.

 

 

Take care.  Mike.  Sent from my iBarstool.
I don't know the key to success, but the key to failure is trying to please everybody.

----- Original Message -----

Sent: Monday, June 22, 2020 5:49 AM

Subject: Re: the first of 2 questions

 

Thanks, Chris, but it wasn’t doing it until the latest update of JAWS. I have checked the settings in Word, and they are the same as they have always been. Could the latest update for windows have effected this? I use Word 2016.

 

 

Shirley Tracy

 

From: Chris Hill
Sent: Monday, June 22, 2020 8:18 AM
To: main@jfw.groups.io
Subject: Re: the first of 2 questions

 

It isn't jaws doing that, word is doing that.  Open word, hit alt+f, arrow up to options and hit enter.  Arrow down to proofing and hit tab.  All the options are there.  You can decide what is auto-corrected, or turn it off altogether under auto correct options. 

 

 

On 6/22/2020 06:23, Shirley Tracy wrote:

Hi everyone,

 

How do I keep JAWS from automatically making corrections in Word? I don’t even know the corrections have been made, and sometimes a spelling word is not incorrect (such as an unusual spelling of a name).   

 

Shirley Tracy

 

 

 


moderated Re: web site having to enter password twice

kevin meyers
 

It happens with Google Chrome and FireFox. The bank support said I just have to press enter on the line I type in the password. On other sites I always tab to logon or signon and press enter.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Monday, June 22, 2020 12:28 PM
To: main@jfw.groups.io
Subject: Re: web site having to enter password twice

 

Does this happen with a different browser?

 

Love in Christ
Marty
If we view this present life as our primary goal, we will agree with William Shakespeare who said: “Life is a tale told by an idiot, full of sound and fury, signifying nothing.” From TODAY IN THE WORD June 1, 2020

 

Sent: Monday, June 22, 2020 9:24 AM

Subject: Re: web site having to enter password twice

 

Not your laptop or issue would happen every time.



On Jun 22, 2020, at 10:16 AM, Kevin Meyers <kman2020@...> wrote:



Hello, I’m using windows10 and most recent version of Jaws2020. When I go to my bank’s web site, I enter my user id and password. The screen comes back and I have to enter a second time. The first time I entered it and tab to logon. The next time I enter it I tab twice and it now says signon. There is no error message saying I entered the wrong user id or password. I made sure I typed in the correct user id and password. I had a friend do it with site and the same problem occurs. I should say the second time I enter it I get on to the site. I have cleaned out all browser data in chrome and then temp files/cookies. The bank say it is not their problem contact support for your laptop. If I want the place I purchased the laptop from, they want 7-10 days to look at it. That is not acceptable. Is it even a problem with my laptop? I can log on to any other site with no problem. The bank says I’m the only one that has this problem. Any thoughts of what I could do? Thanks, Kevin


moderated Re: Video Chatting on Facebook Using JAWS

JM Casey
 

Yes. The message you were replying to there specifically mentions windows and the Microsoft Store.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Miller
Sent: June 17, 2020 7:21 PM
To: main@jfw.groups.io
Subject: Re: Video Chatting on Facebook Using JAWS

 

Will this app work even with a PC?  I do not have a phone.  I have a Dell PC and I use Windows 10.

 

 

 

Rick Miller

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of JM Casey
Sent: Tuesday, June 16, 2020 5:54 PM
To: main@jfw.groups.io
Subject: Re: Video Chatting on Facebook Using JAWS

 

Yes, that’s what I’m talking about

Go to the messenger website. There is a direct link to the microsft store where the app can be downloaded. You can probably do a search at the store itself too but the last time I tried that, I couldn’t seem to get the right result to come up/activate so I think going through the web is preferrable, but it’s up to you.

Anyway, once you click “get”, the software will install. Once tha’ts done I open windows search and start typing in “messenger”. It will come up and you can work with it from there.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Casey
Sent: June 16, 2020 9:54 AM
To: main@jfw.groups.io
Subject: Re: Video Chatting on Facebook Using JAWS

 

hi can you get the messenger app for your PC?

So that you don't have to go to the messenger web site to use it.

And if so where do you go to get it and what is the best way to install it?

On 6/16/2020 8:13 AM, JM Casey wrote:

Never tried using this feature, but you can download the messenger “app” and install that. It’s a Windows Store app. Go to

http://www.messenger.com

It has buttons to audio or video call people on your list. Not sure if there’s a way to do this from within browser or not…

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Miller
Sent: June 15, 2020 11:17 PM
To: jfw@groups.io
Subject: Video Chatting on Facebook Using JAWS

 

Anyone:

 

I looked up the instructions about how to video chat with a friend on Facebook.  The first thing it says is “Click in the upper right of the screen.”  Is there any way using JAWS that you can video chat with someone?

 

 

 

Rick Miller

 

-- 
Casey


moderated Re: jaws cutting in and out with air pods bluetooth headset

David Diamond
 

What is the option as this happens with me with my hearing aids. The receiver is plugged into the headphone jack on my computer and sometimes JAWS cuts out or does not work at all.  I just wait for a few seconds, 15-20 and JAWS starts working again.   


moderated Re: Reading PDF Documents with Line Numbers

 

If one opens a PDF file using MS-Word, you can use the advanced find feature to find the first non-numeric character in the document.

1. Once the document is open in Word, hit ALT+H,FD,A to open the advanced search (AKA Find and Replace) dialog, you will only be using the Find tab, not replace, and the Find tab is what should open by default.

2. The first time you open the dialog in Word, if you have started Word afresh, you will not be showing the group of checkboxes you need to have access to.  There is a More button, activate it, or press ALT+M.  Either method gets the advanced find option checkboxes visible and accessible.  Once you have done this, and step 3, if you have not closed MS-Word, when you bring up the advanced find dialog again the Use Wildcards checkbox will remain checked.  But if you close word, and open it again, you will have to repeat this step and step 3.

3. Navigate to the Use wildcards checkbox, and check it, or use ALT+U to toggle it on. 

4. Navigate back to the Find what edit box, or hit ALT+N to throw focus there.   In that box, enter exactly what follows, starting with the open square bracket to the end of th the line:  [a-z][A-Z]

5. Navigate to the Find Next button, and activate it, or use ALT+F to activate it.  This should take you to the first lowercase or uppercase character in the document, bypassing all numeric characters that occur prior to it.

6. Close the dialog, and you should have focus on that first letter in the first line of words in your converted PDF.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

The purpose of education is not to validate ignorance but to overcome it.
       ~ Lawrence Krauss


moderated Re: Permision to delete a folder

 

On Mon, Jun 22, 2020 at 04:01 PM, john.falter wrote:
Probably the folder or something inside the folder is in use.
-
Were that the case, the message from Windows generally states that something's in use.  There are times, and it looks like this may be one, where permissions have become screwed up in some way, particularly if Marty is logged in as the same user that the file is supposed to belong to.

I will be curious to hear what the final method of resolution is.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

The purpose of education is not to validate ignorance but to overcome it.
       ~ Lawrence Krauss


moderated Re: Reading PDF Documents with Line Numbers

Adrian Spratt
 

Clever.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via groups.io
Sent: Monday, June 22, 2020 3:04 PM
To: main@jfw.groups.io
Subject: Re: Reading PDF Documents with Line Numbers

Kelby,
I have an idea for you to try. When the PDF opens, could you hit "J" to open the jump to line dialog box. It might take a bit of trial to figure out what value to enter to skip past the numbers you are hearing at the beginning, but maybe it would save you the arrowing down. If each page has roughly the same number of lines on it, the value you enter would likely be the same for each document or page. Just an idea that I cannot test.

Robin





-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of kelby carlson
Sent: Monday, June 15, 2020 6:56 PM
To: main@jfw.groups.io
Subject: Reading PDF Documents with Line Numbers

In my work, I frequently have to read transcripts of proceeding where each of the lines is numbered. When I open a transcript like this in Adobe, frequently all of the line numbers will be at the top of the page and I have to keep arrowing down to get to the text. I know this is a unique problem, but is there anything JAWS can do that will help with this? Right now it takes me longer to read these documents than it should.


This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key, send an email to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: Permision to delete a folder

john.falter
 

Probably the folder or something inside the folder is in use.

On 6/22/2020 12:01 AM, Marty Hutchings wrote:
I am trying to delete a folder from My Music and I keep getting a "Permission Denied.  I must get permission from Marty PC to modify this folder"  I am the administrator of this computer.  Wouldn't I have permission to do anything?  this is a Windows 7 computer with the latest JAWS 2020.

Virus-free. www.avast.com


moderated Re: Reading PDF Documents with Line Numbers

Van Lant, Robin
 

Kelby,
I have an idea for you to try. When the PDF opens, could you hit "J" to open the jump to line dialog box. It might take a bit of trial to figure out what value to enter to skip past the numbers you are hearing at the beginning, but maybe it would save you the arrowing down. If each page has roughly the same number of lines on it, the value you enter would likely be the same for each document or page. Just an idea that I cannot test.

Robin

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of kelby carlson
Sent: Monday, June 15, 2020 6:56 PM
To: main@jfw.groups.io
Subject: Reading PDF Documents with Line Numbers

In my work, I frequently have to read transcripts of proceeding where each of the lines is numbered. When I open a transcript like this in Adobe, frequently all of the line numbers will be at the top of the page and I have to keep arrowing down to get to the text. I know this is a unique problem, but is there anything JAWS can do that will help with this? Right now it takes me longer to read these documents than it should.


This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key, send an email to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: I need a refresher course for windows media player. frown.

 

Ripping a CD Using Windows Media Player

What follows presumes that you will be ripping to MP3 format.  Please read all the way through the instructions first, as the information about the MP3Gain Utility and setting up a staging folder for it are every bit as important as the basics of setting up CD ripping.  There is a separate set of instructions focusing on using MP3Gain itself.

1. Open Windows Media Player (WMP) and insert a CD.  You can stop it as soon as it starts playing.  You cannot do the steps that follow unless an audio CD is in the tray and its tracks have been recognized by WMP.

2. Once the CD has been stopped, hit ALT+E to open the Rip Settings dropdown menu.  Make sure you select the file format and audio quality level you wish to have used on future automatic rips.

3. If you happen to have closed the Rip Settings menu ALT+E will open it again.  There are two entries in this menu that immediately follow the Audio Quality entry:

                 a.  Rip CD Automatically

                 b.  Eject CD after ripping

both are check toggles and can be used in whatever combination you'd like.  If your goal is to always just rip a CD immediately without playing it (unless you press the Play button) then both of these should be checked.

That's it.  From the point you've got both of those boxes checked if you insert a CD that has not already been ripped it will immediately be ripped to the location you've set up for your music library (for most of us that's the Music library that Windows has set up out of the box, but it can be changed) and ejected when the rip is complete (or has failed at some point - which is rare).

If you are ripping to MP3 format, and intend to use your resulting files on various players, I strongly suggest you take a look at the free MP3Gain utility.  It saves both your sanity and your ears since the differences in the volume levels used for different albums is substantial.  The program does a statistical analysis of how loud a given track "sounds to the human ear" and adds a tag at the start of the file to adjust it to a target volume (and 89.0 db is their default, and works well).  It does not reencode the file so it has no impact on the sound quality.  I also strongly suggest that you do the following in Windows Media Player so that freshly ripped files go to their own staging folder to be processed with MP3Gain rather than directly into your Music Library, which is where ripped content would go by default:

1.       Open the Tools Menu (ALT+T) then choose Options (O).

2.       Navigate to the Rip Music tab.

3.      In the Rip music to this location section, there will be a folder listed, which defaults to your Music library.  Activate the Change button and then, if you’ve created the folder you want to use ahead of time, navigate to it and activate the OK button.  If you didn’t create it ahead of time, navigate to the folder where you want it to be created, then hit the Create New Folder button, give the new folder a name, then hit OK.  I suggest using your Documents folder and to have a specific folder under there named something like For MP3Gain Processing, so it’s obvious what’s in there needs to be processed.

4.      You can also take this opportunity to recheck your settings under the Rip settings section to ensure that you have the checkboxes for Rip CD automatically and Eject CD after ripping are both checked and your MP3 bit rate (Audio Quality) is set where you want it.  I always use the maximum of 320 Kbps, but many don’t go beyond 192 Kbps.  That choice is entirely yours.

5.      Activate the OK button to close the Options dialog.  If you checked both checkboxes, going forward any time you insert a CD when Windows Media Player is running it will automatically rip the contents to your staging folder and then eject the CD once the rip process is complete.  A rip for most CDs takes several minutes, at most, but the longer the CD the longer the rip time.

You will move the music files from your staging folder to your actual Music library after you have processed them with MP3Gain.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

The purpose of education is not to validate ignorance but to overcome it.
       ~ Lawrence Krauss


moderated Re: Deleting numbers and bullets in word 2016

Mike B
 


Here are a couple of notes for this:
 
From: Humberto Avila
What I usually do is go in Word, then press ALT+T followed by the A key. Trust me, this works still. This brings me to the Word autocorrect options dialog.
From here, I would press the Control+Tab keystroke about 3 times till I hear the “Autoformat as you type” page. Hitting Tab then brings me through all
the options available. You can turn off automatic bulleted list, numbered lists ETC, ETC and more ETC. :) :) There are a plethora and myriad of options
you can check off here.
 
Hope this is helpful! You can also get to the Autocorrect options dialog through the Word general options, with ALT+F, then T.
Humberto
 
From: Poppa Bear
Here are the steps in Mail, they work in Word as well. I removed step 2 because it is no longer relevant in newer versions of Word.
1. From the File tab, click Options, Alt/F then letter T.
 
3. In the Proofing section, click AutoCorrect Options.
 
4. Click the AutoFormat As You Type tab.
 
5. In the Apply as you type section, un-check Automatic bulleted lists and Automatic numbered lists.
 
6. Click OK on each dialog box to return to your mailbox.
 
To kill numbering, press control + shift + n.  In effect, you are switching to "normal" style.  The same keystroke works in Microsoft Word.  After you
do that, there will be no numbering.  To resume numbering, move up to the last numbered paragraph, press control + shift + c to copy formatting.
Then, move down to where you want numbering to resume.  Press control + shift + v to paste formatting.
Poppa Bear

Take care.  Mike.  Sent from my iBarstool.
I don't know the key to success, but the key to failure is trying to please everybody.

----- Original Message -----
Sent: Monday, June 22, 2020 10:48 AM
Subject: Re: Deleting numbers and bullets in word 2016

How would I turn off the feature?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: Monday, June 22, 2020 01:47 PM
To: main@jfw.groups.io
Subject: Re: Deleting numbers and bullets in word 2016

 

TThe way I would do it, for just deleting them, and not for turning off that feature, which I would also recommend, is to arrow to what you want to delete, and hold the control key and tap the space bar till it says selected.

Then copy, and then do control + H and tab through the fields, and in the find field, do the paste command, and tab to the replace with field and press the delete key and then do alt + A for all.

HTH.

 

----- Original Message -----

Sent: Monday, June 22, 2020 12:42 PM

Subject: Deleting numbers and bullets in word 2016

 

Good afternoon:

 

I'm using Jaws 2019 and Windows 10 with word 2016. Can someone tell me how to delete automatic bullets and numbers?

Thanks.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: M


moderated I need a refresher course for windows media player. frown.

Jim Rawls
 

Hi all,

Since Cdex doesn't work for ripping files now. I guess I am forced to use WMP. Cdex no longer has a data base. And I don't know of any other program that does now. Anyway how do I rip cdex using WMP? I am using jaws 2020 on a windows ten computer. Jim


moderated Re: Deleting numbers and bullets in word 2016

Glenn / Lenny
 


That is in Office settings, if I remember right, you find settings under tools.
It may be on the general tab, but you may have to go to the spelling and grammar tab.
I'm working with an older office, so it may be different in your version, but that is the idea.
Glenn

----- Original Message -----
Sent: Monday, June 22, 2020 12:48 PM
Subject: Re: Deleting numbers and bullets in word 2016

How would I turn off the feature?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: Monday, June 22, 2020 01:47 PM
To: main@jfw.groups.io
Subject: Re: Deleting numbers and bullets in word 2016

 

TThe way I would do it, for just deleting them, and not for turning off that feature, which I would also recommend, is to arrow to what you want to delete, and hold the control key and tap the space bar till it says selected.

Then copy, and then do control + H and tab through the fields, and in the find field, do the paste command, and tab to the replace with field and press the delete key and then do alt + A for all.

HTH.

 

----- Original Message -----

Sent: Monday, June 22, 2020 12:42 PM

Subject: Deleting numbers and bullets in word 2016

 

Good afternoon:

 

I'm using Jaws 2019 and Windows 10 with word 2016. Can someone tell me how to delete automatic bullets and numbers?

Thanks.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: M


moderated Re: Deleting numbers and bullets in word 2016

John J. Fioravanti, Jr.
 

How would I turn off the feature?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: Monday, June 22, 2020 01:47 PM
To: main@jfw.groups.io
Subject: Re: Deleting numbers and bullets in word 2016

 

TThe way I would do it, for just deleting them, and not for turning off that feature, which I would also recommend, is to arrow to what you want to delete, and hold the control key and tap the space bar till it says selected.

Then copy, and then do control + H and tab through the fields, and in the find field, do the paste command, and tab to the replace with field and press the delete key and then do alt + A for all.

HTH.

 

----- Original Message -----

Sent: Monday, June 22, 2020 12:42 PM

Subject: Deleting numbers and bullets in word 2016

 

Good afternoon:

 

I'm using Jaws 2019 and Windows 10 with word 2016. Can someone tell me how to delete automatic bullets and numbers?

Thanks.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: M


moderated Re: Deleting numbers and bullets in word 2016

Glenn / Lenny
 


TThe way I would do it, for just deleting them, and not for turning off that feature, which I would also recommend, is to arrow to what you want to delete, and hold the control key and tap the space bar till it says selected.
Then copy, and then do control + H and tab through the fields, and in the find field, do the paste command, and tab to the replace with field and press the delete key and then do alt + A for all.
HTH.
 

----- Original Message -----
Sent: Monday, June 22, 2020 12:42 PM
Subject: Deleting numbers and bullets in word 2016

Good afternoon:

 

I'm using Jaws 2019 and Windows 10 with word 2016. Can someone tell me how to delete automatic bullets and numbers?

Thanks.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: M


moderated Deleting numbers and bullets in word 2016

John J. Fioravanti, Jr.
 

Good afternoon:

 

I'm using Jaws 2019 and Windows 10 with word 2016. Can someone tell me how to delete automatic bullets and numbers?

Thanks.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: M


moderated Re: Permission to delete a folder

Glenn / Lenny
 


Before I went to rebooting in safe mode, I'd just reboot and log in as the user for which the folder belongs to.
Glenn

----- Original Message -----
Sent: Monday, June 22, 2020 12:25 PM
Subject: Re: Permission to delete a folder

On Mon, Jun 22, 2020 at 10:37 AM, Marty Hutchings wrote:
What would be the equivalent key stroke for my Windows PC?

If SHIFT+DEL won't do it, then try one of the tutorials returned by:

See:  https://duckduckgo.com/?q=force+delete+windows

The most comprehensive one (which can be more confusing at times) is:  https://windowsedition.com/force-delete-files-folders-windows-10/

I use either Command Prompt or PowerShell, running with elevated admin permission, and the DEL command with the switches noted in most cases if SHIFT+DEL won't work.  If push comes to shove, then it's Safe Mode.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

The purpose of education is not to validate ignorance but to overcome it.
       ~ Lawrence Krauss


moderated Re: web site having to enter password twice

Marty Hutchings
 

Does this happen with a different browser?
 
Love in Christ
Marty
If we view this present life as our primary goal, we will agree with William Shakespeare who said: “Life is a tale told by an idiot, full of sound and fury, signifying nothing.” From TODAY IN THE WORD June 1, 2020
 

Sent: Monday, June 22, 2020 9:24 AM
Subject: Re: web site having to enter password twice
 
Not your laptop or issue would happen every time.


On Jun 22, 2020, at 10:16 AM, Kevin Meyers <kman2020@...> wrote:



Hello, I’m using windows10 and most recent version of Jaws2020. When I go to my bank’s web site, I enter my user id and password. The screen comes back and I have to enter a second time. The first time I entered it and tab to logon. The next time I enter it I tab twice and it now says signon. There is no error message saying I entered the wrong user id or password. I made sure I typed in the correct user id and password. I had a friend do it with site and the same problem occurs. I should say the second time I enter it I get on to the site. I have cleaned out all browser data in chrome and then temp files/cookies. The bank say it is not their problem contact support for your laptop. If I want the place I purchased the laptop from, they want 7-10 days to look at it. That is not acceptable. Is it even a problem with my laptop? I can log on to any other site with no problem. The bank says I’m the only one that has this problem. Any thoughts of what I could do? Thanks, Kevin


moderated Re: Permission to delete a folder

 

On Mon, Jun 22, 2020 at 10:37 AM, Marty Hutchings wrote:
What would be the equivalent key stroke for my Windows PC?

If SHIFT+DEL won't do it, then try one of the tutorials returned by:

See:  https://duckduckgo.com/?q=force+delete+windows

The most comprehensive one (which can be more confusing at times) is:  https://windowsedition.com/force-delete-files-folders-windows-10/

I use either Command Prompt or PowerShell, running with elevated admin permission, and the DEL command with the switches noted in most cases if SHIFT+DEL won't work.  If push comes to shove, then it's Safe Mode.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

The purpose of education is not to validate ignorance but to overcome it.
       ~ Lawrence Krauss