Date   

moderated Jaws and synthesizers

Boston, Jason W
 

Hello all,

I was wondering if there is  a way to make Jaws only send output to the right or left audio channel? If not jaws, can this be done to one of the synthesizers that come with Jaws?

 

Thanks,

Jason

 

The information contained in this message is proprietary and/or confidential. If you are not the intended recipient, please: (i) delete the message and all copies; (ii) do not disclose, distribute or use the message in any manner; and (iii) notify the sender immediately. In addition, please be aware that any message addressed to our domain is subject to archiving and review by persons other than the intended recipient. Thank you.


moderated Re: Reading PDF Documents with Line Numbers

Dean Martineau <topdot@...>
 

I wonder what would happen if you sent that PDF to Word, assuming you're running something modern, Microsoft 365 for instance. Now I seldom open PDF's in Adobe. I have Word in my SendTo folder, so when I encounter a PDF, in the context menu I hit N for SendTo, W for Word and the PDF opens very readably in Word. As I'm writing, I don't know why I don't just change the default for PdF to Word. Just a thought.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Chris Hill
Sent: Monday, June 15, 2020 11:09 PM
To: main@jfw.groups.io
Subject: Re: Reading PDF Documents with Line Numbers

When you open the document, does adobe not ask you what reading order
you'd prefer? If so, have you tried the various options? If not, maybe
you should check in the edit menu for the accessibility assistant and
turn the reading order feature back on. May not help, but this sounds
like what the feature should have been meant for.





On 6/15/2020 19:56, kelby carlson wrote:
In my work, I frequently have to read transcripts of proceeding where each of the lines is numbered. When I open a transcript like this in Adobe, frequently all of the line numbers will be at the top of the page and I have to keep arrowing down to get to the text. I know this is a unique problem, but is there anything JAWS can do that will help with this? Right now it takes me longer to read these documents than it should.


moderated Re: word count in MS Word

george b <gbmagoo@...>
 

Lol mike don’t get upset, but what did that have to do with word count?

 

That bar stool must be catching up with you…lol

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
Sent: June 16, 2020 6:01
To: main@jfw.groups.io
Subject: Re: word count in MS Word

 

When the, Save , button comes up tab 1 time to the, Don't save , button and press the spacebar on that.  The document should close without any supposed or unwanted changes.


Take care.  Mike.  Sent from my iBarstool.
 *My body has absorbed so much soap and disinfectant lately that when I pee it cleans the toilet.

----- Original Message -----

From: CJ &AA MAY

Sent: Tuesday, June 16, 2020 1:27 AM

Subject: Re: word count in MS Word

 

I too, when using control shift g, get asked if I want to save the changes. I didn’t know about this command.

Alison

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
Sent: 15 June 2020 18:10
To: main@jfw.groups.io
Subject: Re: word count in MS Word

 

Hi Al & Adrian,

 

When I think to use the, Control, Shift + G , keystroke instead of the, Insert + Pagedown , keystroke and get that save dialogue I tab 1 time to the, don't save button, and press the spacebar.  This closes the document with no problems or changes to the document.


Take care.  Mike.  Sent from my iBarstool.
 *My body has absorbed so much soap and disinfectant lately that when I pee it cleans the toilet.

----- Original Message -----

Sent: Monday, June 15, 2020 6:21 AM

Subject: Re: word count in MS Word

 

Al,

 

I’m not Mike, needless to say, but your post made me curious. I confirmed that with Word 2016, I have the same experience using shift-control-g. that is, when performing no other operation on a document, after using that command I need to save changes in order to close the document.

 

My only thought is that the same thing happens when the only operation I perform on a Word document is to copy some text. I haven’t changed it at all, and yet here to,, I must save changes in order to close the document.

 

In either case, whatever change the program perceives has occurred, I think you can be confident it isn’t one that affects the text or format in any way.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Al Sorrentino via groups.io
Sent: Sunday, June 14, 2020 11:18 PM
To: main@jfw.groups.io
Subject: Re: word count in MS Word

 

Hi Mike,

 

Thank you very much for those GREAT key strokes.  For years I’ve been using the insert and the down arrow keys and I like this new system.    

 

I just tried it on an existing Word document and it worked with lots of info, but when I tried to exit my document, JAWS asked me if I wanted to save changes.  Other than opening the existing document and using Control, Shift and the letter G, I did not change my original document.  Are the Control, Shift and the letter G adding something to my document?  I experimented with the same document and used Insert and the down arrow keys and JAWS did not tell me if I wanted to save the document.  It just exited my document.  Am I doing something wrong when I open up my document and using your commands?  Any help will be greatly appreciated.  Oh, by the way, I am using JAWS 15, Windows 7 and Word 2010.

 

Al

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf of Mike B
Sent: Sunday, June 14, 2020 3:49 PM
To: main@jfw.groups.io
Subject: Re: word count in MS Word

 

Another keystroke that will give a little more than the word count is Control, Shift + G.


Take care.  Mike.  Sent from my iBarstool.
 *My body has absorbed so much soap and disinfectant lately that when I pee it cleans the toilet.

----- Original Message -----

From: Alan Lemly

Sent: Sunday, June 14, 2020 12:44 PM

Subject: Re: word count in MS Word

 

Adrian,

Thanks for that clarification. Mike is certainly the master at providing
detailed instructions at bending Microsoft Office to our wills with JAWS.

Alan

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Adrian
Spratt
Sent: Sunday, June 14, 2020 1:55 PM
To: main@jfw.groups.io
Subject: Re: word count in MS Word

Alan,

FYI, yes JAWS key+pagedown/3 still usually works with Word 2016. However,
sometimes it fails, in which case Mike B's instructions explain how to
return the status line to showing these items, or not, as you choose.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Alan Lemly
Sent: Sunday, June 14, 2020 12:01 PM
To: main@jfw.groups.io
Subject: Re: word count in MS Word

Alison,

I'm running Word 2010 on a Windows 7 computer and I use JAWS key plus
PageDown key which reads the status line which reports Page number, line
number, and word count. I don't know if this works in newer versions of
Office but it works well on my system.

Alan Lemly

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of CJ &AA MAY
Sent: Sunday, June 14, 2020 1:49 AM
To: main@jfw.groups.io
Subject: Re: word count in MS Word

Until recently, pressing Jaws key 3 has told me the number of words in my MS
Word document. It now tells me the number of characters and which line I am
on but I am having to press function key 6 in order to get a word count. Is
there a way I can amend this?
Alison
 

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: 14 June 2020 02:34
To: main@jfw.groups.io
Subject: Re: how to read highlighted text on web page

I found a keystroke jaws+alt+s where I can change the scheme to read the
colors -- I don't know why it did not work when I tried to do it from the
settings center, but it seems to work fairly well, only problem is that Jaws
goes silent sometimes for 15-20 seconds after I hit jaws-to-pc hot key --
using Chrome.

Thanks for everyones suggestion, I hope this works.

On Sat, 13 Jun 2020 18:22:54 -0400,
Dean Martineau wrote:
>
> [1  <text/plain; us-ascii (7bit)>]
> I'll be surprised if the ReadSelectedText hotkey, JAWSKey+Shift+down
> arrow identifies text that has been highlighted by a web developer or
> document author.  The only keystroke that might work is JAWSKey+5 (on
> the number row) to identify color, and I'm not too optimistic about
> that
either.
>
>
>
>
>
>
>
> From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
> Sent: Saturday, June 13, 2020 5:09 PM
> To: main@jfw.groups.io
> Subject: Re: how to read highlighted text on web page
>
>
>
> Try this keystroke:
>
> Shift+JAWSKey+DownArrow
>
> Says selected or highlighted text that appears on the screen.
>
> Take care.  Mike.  Sent from my iBarstool.
>  *My body has absorbed so much soap and disinfectant lately that when
> I pee it cleans the toilet.
>
> ----- Original Message -----
>
> From: Richard Chen <mailto:richlchen@...>
>
> To: main@jfw.groups.io <mailto:main@jfw.groups.io>
>
> Sent: Saturday, June 13, 2020 11:10 AM
>
> Subject: Re: how to read highlighted text on web page
>
>
>
> It would be great to figure out where in a document is any highlighted
text.
>
> -----Original Message-----
> From: main@jfw.groups.io <mailto:main@jfw.groups.io>
> <main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of Glenn /
> Lenny
> Sent: Saturday, June 13, 2020 2:09 PM
> To: main@jfw.groups.io <mailto:main@jfw.groups.io>
> Subject: Re: how to read highlighted text on web page
>
> If one just wants to read what is highlighted, the Jaws hotkey insert
> + Shift + numpad 2 will read the highlighted text.
> Glenn
> ----- Original Message -----
> From: "John Covici" <covici@...
> <mailto:covici@...> >
> To: <main@... <mailto:main@jfw.groups.io> >
> Sent: Saturday, June 13, 2020 1:02 PM
> Subject: Re: how to read highlighted text on web page
>
>
> hmmm, jaws +f2 just says custom hilight and you can set the foreground
> and background, but seems no way to read them.
>
> On Sat, 13 Jun 2020 13:28:59 -0400,
> Adrian Spratt wrote:
> >
> > One thought is to place focus on each of the options and, in each
> > case, press JAWS key+f to compare fonts, etc. This may be all you need.
> > Otherwise, it may tell you how the highlighted text differs from the
> > non-highlighted.
> >
> > -----Original Message-----
> > From: main@jfw.groups.io <mailto:main@jfw.groups.io>
> > <main@jfw.groups.io
> <mailto:main@jfw.groups.io> > On Behalf Of John Covici
> > Sent: Saturday, June 13, 2020 12:11 PM
> > To: jfw@groups.io <mailto:jfw@groups.io>
> > Subject: how to read hilighted text on web page
> >
> > Hi.  OI am using Jaws 2020 latest update and I can't seem to read
> > hilighted text on web page.  What I am trying to read are options
> > with y/n
>
> > choices and one of them is hilighted.  I tried to  use a different
> > sound scheme such as attributes and colors, but no joy.
> >
> > Thanks in advance for any suggestions.
> >
> > --
> > Your life is like a penny.  You're going to lose it.  The question is:
> > How do
> > you spend it?
> >
> >          John Covici wb2una
> >          covici@... <mailto:covici@...>
> >
> >
> >
> >
> >
> >
> >
>
> --
> Your life is like a penny.  You're going to lose it.  The question is:
> How do
> you spend it?
>
>          John Covici wb2una
>          covici@... <mailto:covici@...>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> [2  <text/html; us-ascii (quoted-printable)>]

--
Your life is like a penny.  You're going to lose it.  The question is:
How do
you spend it?

         John Covici wb2una
         covici@...













moderated Re: Video Chatting on Facebook Using JAWS

JM Casey
 

Never tried using this feature, but you can download the messenger “app” and install that. It’s a Windows Store app. Go to

http://www.messenger.com

It has buttons to audio or video call people on your list. Not sure if there’s a way to do this from within browser or not…

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Miller
Sent: June 15, 2020 11:17 PM
To: jfw@groups.io
Subject: Video Chatting on Facebook Using JAWS

 

Anyone:

 

I looked up the instructions about how to video chat with a friend on Facebook.  The first thing it says is “Click in the upper right of the screen.”  Is there any way using JAWS that you can video chat with someone?

 

 

 

Rick Miller

 


moderated Re: word count in MS Word

Mike B
 

When the, Save , button comes up tab 1 time to the, Don't save , button and press the spacebar on that.  The document should close without any supposed or unwanted changes.

Take care.  Mike.  Sent from my iBarstool.
 *My body has absorbed so much soap and disinfectant lately that when I pee it cleans the toilet.

----- Original Message -----
From: CJ &AA MAY
Sent: Tuesday, June 16, 2020 1:27 AM
Subject: Re: word count in MS Word

I too, when using control shift g, get asked if I want to save the changes. I didn’t know about this command.

Alison

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
Sent: 15 June 2020 18:10
To: main@jfw.groups.io
Subject: Re: word count in MS Word

 

Hi Al & Adrian,

 

When I think to use the, Control, Shift + G , keystroke instead of the, Insert + Pagedown , keystroke and get that save dialogue I tab 1 time to the, don't save button, and press the spacebar.  This closes the document with no problems or changes to the document.


Take care.  Mike.  Sent from my iBarstool.
 *My body has absorbed so much soap and disinfectant lately that when I pee it cleans the toilet.

----- Original Message -----

Sent: Monday, June 15, 2020 6:21 AM

Subject: Re: word count in MS Word

 

Al,

 

I’m not Mike, needless to say, but your post made me curious. I confirmed that with Word 2016, I have the same experience using shift-control-g. that is, when performing no other operation on a document, after using that command I need to save changes in order to close the document.

 

My only thought is that the same thing happens when the only operation I perform on a Word document is to copy some text. I haven’t changed it at all, and yet here to,, I must save changes in order to close the document.

 

In either case, whatever change the program perceives has occurred, I think you can be confident it isn’t one that affects the text or format in any way.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Al Sorrentino via groups.io
Sent: Sunday, June 14, 2020 11:18 PM
To: main@jfw.groups.io
Subject: Re: word count in MS Word

 

Hi Mike,

 

Thank you very much for those GREAT key strokes.  For years I’ve been using the insert and the down arrow keys and I like this new system.    

 

I just tried it on an existing Word document and it worked with lots of info, but when I tried to exit my document, JAWS asked me if I wanted to save changes.  Other than opening the existing document and using Control, Shift and the letter G, I did not change my original document.  Are the Control, Shift and the letter G adding something to my document?  I experimented with the same document and used Insert and the down arrow keys and JAWS did not tell me if I wanted to save the document.  It just exited my document.  Am I doing something wrong when I open up my document and using your commands?  Any help will be greatly appreciated.  Oh, by the way, I am using JAWS 15, Windows 7 and Word 2010.

 

Al

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf of Mike B
Sent: Sunday, June 14, 2020 3:49 PM
To: main@jfw.groups.io
Subject: Re: word count in MS Word

 

Another keystroke that will give a little more than the word count is Control, Shift + G.


Take care.  Mike.  Sent from my iBarstool.
 *My body has absorbed so much soap and disinfectant lately that when I pee it cleans the toilet.

----- Original Message -----

From: Alan Lemly

Sent: Sunday, June 14, 2020 12:44 PM

Subject: Re: word count in MS Word

 

Adrian,

Thanks for that clarification. Mike is certainly the master at providing
detailed instructions at bending Microsoft Office to our wills with JAWS.

Alan

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Adrian
Spratt
Sent: Sunday, June 14, 2020 1:55 PM
To: main@jfw.groups.io
Subject: Re: word count in MS Word

Alan,

FYI, yes JAWS key+pagedown/3 still usually works with Word 2016. However,
sometimes it fails, in which case Mike B's instructions explain how to
return the status line to showing these items, or not, as you choose.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Alan Lemly
Sent: Sunday, June 14, 2020 12:01 PM
To: main@jfw.groups.io
Subject: Re: word count in MS Word

Alison,

I'm running Word 2010 on a Windows 7 computer and I use JAWS key plus
PageDown key which reads the status line which reports Page number, line
number, and word count. I don't know if this works in newer versions of
Office but it works well on my system.

Alan Lemly

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of CJ &AA MAY
Sent: Sunday, June 14, 2020 1:49 AM
To: main@jfw.groups.io
Subject: Re: word count in MS Word

Until recently, pressing Jaws key 3 has told me the number of words in my MS
Word document. It now tells me the number of characters and which line I am
on but I am having to press function key 6 in order to get a word count. Is
there a way I can amend this?
Alison
 

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: 14 June 2020 02:34
To: main@jfw.groups.io
Subject: Re: how to read highlighted text on web page

I found a keystroke jaws+alt+s where I can change the scheme to read the
colors -- I don't know why it did not work when I tried to do it from the
settings center, but it seems to work fairly well, only problem is that Jaws
goes silent sometimes for 15-20 seconds after I hit jaws-to-pc hot key --
using Chrome.

Thanks for everyones suggestion, I hope this works.

On Sat, 13 Jun 2020 18:22:54 -0400,
Dean Martineau wrote:
>
> [1  <text/plain; us-ascii (7bit)>]
> I'll be surprised if the ReadSelectedText hotkey, JAWSKey+Shift+down
> arrow identifies text that has been highlighted by a web developer or
> document author.  The only keystroke that might work is JAWSKey+5 (on
> the number row) to identify color, and I'm not too optimistic about
> that
either.
>
>
>
>
>
>
>
> From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
> Sent: Saturday, June 13, 2020 5:09 PM
> To: main@jfw.groups.io
> Subject: Re: how to read highlighted text on web page
>
>
>
> Try this keystroke:
>
> Shift+JAWSKey+DownArrow
>
> Says selected or highlighted text that appears on the screen.
>
> Take care.  Mike.  Sent from my iBarstool.
>  *My body has absorbed so much soap and disinfectant lately that when
> I pee it cleans the toilet.
>
> ----- Original Message -----
>
> From: Richard Chen <mailto:richlchen@...>
>
> To: main@jfw.groups.io <mailto:main@jfw.groups.io>
>
> Sent: Saturday, June 13, 2020 11:10 AM
>
> Subject: Re: how to read highlighted text on web page
>
>
>
> It would be great to figure out where in a document is any highlighted
text.
>
> -----Original Message-----
> From: main@jfw.groups.io <mailto:main@jfw.groups.io>
> <main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of Glenn /
> Lenny
> Sent: Saturday, June 13, 2020 2:09 PM
> To: main@jfw.groups.io <mailto:main@jfw.groups.io>
> Subject: Re: how to read highlighted text on web page
>
> If one just wants to read what is highlighted, the Jaws hotkey insert
> + Shift + numpad 2 will read the highlighted text.
> Glenn
> ----- Original Message -----
> From: "John Covici" <covici@...
> <mailto:covici@...> >
> To: <main@... <mailto:main@jfw.groups.io> >
> Sent: Saturday, June 13, 2020 1:02 PM
> Subject: Re: how to read highlighted text on web page
>
>
> hmmm, jaws +f2 just says custom hilight and you can set the foreground
> and background, but seems no way to read them.
>
> On Sat, 13 Jun 2020 13:28:59 -0400,
> Adrian Spratt wrote:
> >
> > One thought is to place focus on each of the options and, in each
> > case, press JAWS key+f to compare fonts, etc. This may be all you need.
> > Otherwise, it may tell you how the highlighted text differs from the
> > non-highlighted.
> >
> > -----Original Message-----
> > From: main@jfw.groups.io <mailto:main@jfw.groups.io>
> > <main@jfw.groups.io
> <mailto:main@jfw.groups.io> > On Behalf Of John Covici
> > Sent: Saturday, June 13, 2020 12:11 PM
> > To: jfw@groups.io <mailto:jfw@groups.io>
> > Subject: how to read hilighted text on web page
> >
> > Hi.  OI am using Jaws 2020 latest update and I can't seem to read
> > hilighted text on web page.  What I am trying to read are options
> > with y/n
>
> > choices and one of them is hilighted.  I tried to  use a different
> > sound scheme such as attributes and colors, but no joy.
> >
> > Thanks in advance for any suggestions.
> >
> > --
> > Your life is like a penny.  You're going to lose it.  The question is:
> > How do
> > you spend it?
> >
> >          John Covici wb2una
> >          covici@... <mailto:covici@...>
> >
> >
> >
> >
> >
> >
> >
>
> --
> Your life is like a penny.  You're going to lose it.  The question is:
> How do
> you spend it?
>
>          John Covici wb2una
>          covici@... <mailto:covici@...>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> [2  <text/html; us-ascii (quoted-printable)>]

--
Your life is like a penny.  You're going to lose it.  The question is:
How do
you spend it?

         John Covici wb2una
         covici@...














moderated Re: thanks for the helpful replies to my inquiry in win10 in a folder how do you tell Win10 to delete only all the files that have a same particular extension but not the other files in that folder that have different extensions?

Hank William Merchant
 

 
Hello back,
 
I just want to say a big thanks very much to all that have replied to my Re: in win10 in a folder how do you tell Win10 to delete only all the files that have a same particular extension but not the other files in that folder that have different extensions? inquiry email with all your very helpful suggestions on how to do this. Again much, much thanks! I really appreciate all your helpful replys.
 
 
 
 
 
 
 
All the best,
Warmest regards,
 
Hank
 
 

From: Brian Vogel
Sent: Tuesday, June 16, 2020 12:25 AM
To: main@jfw.groups.io
Subject: Re: in win10 in a folder how do you tell Win10 to delete only all the files that have a same particular extension but not the other files in that folder that have different extensions?
 
On Mon, Jun 15, 2020 at 10:33 PM, ratshtron wrote:
open the folder and move to the first file with the particular extention and now, press and hold the ctrl key and start arrowing down through the list of files and every time you land on another file with same extention, press the spacebar to select it. be sure to continue to hold the ctrl key. once you have selected all the files with the same extention, press the delete key and the files will be deleted once you confirm you wish to delete the number of multi-files.

It is much, much easier to use the search function (CTRL+E) and enter the search criteria for all the files you want, then Select All, then delete.

So, once you're in the folder, say you want to delete all PDF files in the folder.  Hit CTRL+E then type *.pdf in the search box then hit enter.  The search will return only files in that folder that are PDF files.  Hit CTRL+A to select all, then hit the DEL key.  You're done.

Of course, the search criteria can be anything that's appropriate, so if you wanted only PDF files that start with, say, Nov, then type Nov*.pdf in the search box and hit enter.  You can use any extension and you can combine things with OR if you want, say all JPG files OR PDF files, that would be *.jpg OR *.PDF, and you'll only get files with one of those two extensions back.

Hand gathering is far more error prone.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

The purpose of education is not to validate ignorance but to overcome it.
       ~ Lawrence Krauss


moderated Re: word count in MS Word

CJ &AA MAY
 

I too, when using control shift g, get asked if I want to save the changes. I didn’t know about this command.

Alison

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
Sent: 15 June 2020 18:10
To: main@jfw.groups.io
Subject: Re: word count in MS Word

 

Hi Al & Adrian,

 

When I think to use the, Control, Shift + G , keystroke instead of the, Insert + Pagedown , keystroke and get that save dialogue I tab 1 time to the, don't save button, and press the spacebar.  This closes the document with no problems or changes to the document.


Take care.  Mike.  Sent from my iBarstool.
 *My body has absorbed so much soap and disinfectant lately that when I pee it cleans the toilet.

----- Original Message -----

Sent: Monday, June 15, 2020 6:21 AM

Subject: Re: word count in MS Word

 

Al,

 

I’m not Mike, needless to say, but your post made me curious. I confirmed that with Word 2016, I have the same experience using shift-control-g. that is, when performing no other operation on a document, after using that command I need to save changes in order to close the document.

 

My only thought is that the same thing happens when the only operation I perform on a Word document is to copy some text. I haven’t changed it at all, and yet here to,, I must save changes in order to close the document.

 

In either case, whatever change the program perceives has occurred, I think you can be confident it isn’t one that affects the text or format in any way.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Al Sorrentino via groups.io
Sent: Sunday, June 14, 2020 11:18 PM
To: main@jfw.groups.io
Subject: Re: word count in MS Word

 

Hi Mike,

 

Thank you very much for those GREAT key strokes.  For years I’ve been using the insert and the down arrow keys and I like this new system.    

 

I just tried it on an existing Word document and it worked with lots of info, but when I tried to exit my document, JAWS asked me if I wanted to save changes.  Other than opening the existing document and using Control, Shift and the letter G, I did not change my original document.  Are the Control, Shift and the letter G adding something to my document?  I experimented with the same document and used Insert and the down arrow keys and JAWS did not tell me if I wanted to save the document.  It just exited my document.  Am I doing something wrong when I open up my document and using your commands?  Any help will be greatly appreciated.  Oh, by the way, I am using JAWS 15, Windows 7 and Word 2010.

 

Al

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf of Mike B
Sent: Sunday, June 14, 2020 3:49 PM
To: main@jfw.groups.io
Subject: Re: word count in MS Word

 

Another keystroke that will give a little more than the word count is Control, Shift + G.


Take care.  Mike.  Sent from my iBarstool.
 *My body has absorbed so much soap and disinfectant lately that when I pee it cleans the toilet.

----- Original Message -----

From: Alan Lemly

Sent: Sunday, June 14, 2020 12:44 PM

Subject: Re: word count in MS Word

 

Adrian,

Thanks for that clarification. Mike is certainly the master at providing
detailed instructions at bending Microsoft Office to our wills with JAWS.

Alan

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Adrian
Spratt
Sent: Sunday, June 14, 2020 1:55 PM
To: main@jfw.groups.io
Subject: Re: word count in MS Word

Alan,

FYI, yes JAWS key+pagedown/3 still usually works with Word 2016. However,
sometimes it fails, in which case Mike B's instructions explain how to
return the status line to showing these items, or not, as you choose.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Alan Lemly
Sent: Sunday, June 14, 2020 12:01 PM
To: main@jfw.groups.io
Subject: Re: word count in MS Word

Alison,

I'm running Word 2010 on a Windows 7 computer and I use JAWS key plus
PageDown key which reads the status line which reports Page number, line
number, and word count. I don't know if this works in newer versions of
Office but it works well on my system.

Alan Lemly

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of CJ &AA MAY
Sent: Sunday, June 14, 2020 1:49 AM
To: main@jfw.groups.io
Subject: Re: word count in MS Word

Until recently, pressing Jaws key 3 has told me the number of words in my MS
Word document. It now tells me the number of characters and which line I am
on but I am having to press function key 6 in order to get a word count. Is
there a way I can amend this?
Alison
 

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: 14 June 2020 02:34
To: main@jfw.groups.io
Subject: Re: how to read highlighted text on web page

I found a keystroke jaws+alt+s where I can change the scheme to read the
colors -- I don't know why it did not work when I tried to do it from the
settings center, but it seems to work fairly well, only problem is that Jaws
goes silent sometimes for 15-20 seconds after I hit jaws-to-pc hot key --
using Chrome.

Thanks for everyones suggestion, I hope this works.

On Sat, 13 Jun 2020 18:22:54 -0400,
Dean Martineau wrote:
>
> [1  <text/plain; us-ascii (7bit)>]
> I'll be surprised if the ReadSelectedText hotkey, JAWSKey+Shift+down
> arrow identifies text that has been highlighted by a web developer or
> document author.  The only keystroke that might work is JAWSKey+5 (on
> the number row) to identify color, and I'm not too optimistic about
> that
either.
>
>
>
>
>
>
>
> From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
> Sent: Saturday, June 13, 2020 5:09 PM
> To: main@jfw.groups.io
> Subject: Re: how to read highlighted text on web page
>
>
>
> Try this keystroke:
>
> Shift+JAWSKey+DownArrow
>
> Says selected or highlighted text that appears on the screen.
>
> Take care.  Mike.  Sent from my iBarstool.
>  *My body has absorbed so much soap and disinfectant lately that when
> I pee it cleans the toilet.
>
> ----- Original Message -----
>
> From: Richard Chen <mailto:richlchen@...>
>
> To: main@jfw.groups.io <mailto:main@jfw.groups.io>
>
> Sent: Saturday, June 13, 2020 11:10 AM
>
> Subject: Re: how to read highlighted text on web page
>
>
>
> It would be great to figure out where in a document is any highlighted
text.
>
> -----Original Message-----
> From: main@jfw.groups.io <mailto:main@jfw.groups.io>
> <main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of Glenn /
> Lenny
> Sent: Saturday, June 13, 2020 2:09 PM
> To: main@jfw.groups.io <mailto:main@jfw.groups.io>
> Subject: Re: how to read highlighted text on web page
>
> If one just wants to read what is highlighted, the Jaws hotkey insert
> + Shift + numpad 2 will read the highlighted text.
> Glenn
> ----- Original Message -----
> From: "John Covici" <covici@...
> <mailto:covici@...> >
> To: <main@... <mailto:main@jfw.groups.io> >
> Sent: Saturday, June 13, 2020 1:02 PM
> Subject: Re: how to read highlighted text on web page
>
>
> hmmm, jaws +f2 just says custom hilight and you can set the foreground
> and background, but seems no way to read them.
>
> On Sat, 13 Jun 2020 13:28:59 -0400,
> Adrian Spratt wrote:
> >
> > One thought is to place focus on each of the options and, in each
> > case, press JAWS key+f to compare fonts, etc. This may be all you need.
> > Otherwise, it may tell you how the highlighted text differs from the
> > non-highlighted.
> >
> > -----Original Message-----
> > From: main@jfw.groups.io <mailto:main@jfw.groups.io>
> > <main@jfw.groups.io
> <mailto:main@jfw.groups.io> > On Behalf Of John Covici
> > Sent: Saturday, June 13, 2020 12:11 PM
> > To: jfw@groups.io <mailto:jfw@groups.io>
> > Subject: how to read hilighted text on web page
> >
> > Hi.  OI am using Jaws 2020 latest update and I can't seem to read
> > hilighted text on web page.  What I am trying to read are options
> > with y/n
>
> > choices and one of them is hilighted.  I tried to  use a different
> > sound scheme such as attributes and colors, but no joy.
> >
> > Thanks in advance for any suggestions.
> >
> > --
> > Your life is like a penny.  You're going to lose it.  The question is:
> > How do
> > you spend it?
> >
> >          John Covici wb2una
> >          covici@... <mailto:covici@...>
> >
> >
> >
> >
> >
> >
> >
>
> --
> Your life is like a penny.  You're going to lose it.  The question is:
> How do
> you spend it?
>
>          John Covici wb2una
>          covici@... <mailto:covici@...>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> [2  <text/html; us-ascii (quoted-printable)>]

--
Your life is like a penny.  You're going to lose it.  The question is:
How do
you spend it?

         John Covici wb2una
         covici@...














moderated Re: Reading PDF Documents with Line Numbers

CJ &AA MAY
 

I have a similar problem with the lyrics sent to me by Rock Choir, so a
solution would be much appreciated.
Alison

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of kelby carlson
Sent: 16 June 2020 01:56
To: main@jfw.groups.io
Subject: Reading PDF Documents with Line Numbers

In my work, I frequently have to read transcripts of proceeding where each
of the lines is numbered. When I open a transcript like this in Adobe,
frequently all of the line numbers will be at the top of the page and I have
to keep arrowing down to get to the text. I know this is a unique problem,
but is there anything JAWS can do that will help with this? Right now it
takes me longer to read these documents than it should.


moderated Re: in win10 in a folder how do you tell Win10 to delete only all the files that have a same particular extension but not the other files in that folder that have different extensions?

 

Apparently, I'm not alone in having the "Current Folder" option to limit search results fail to work.  A very recent topic on answers.microsoft.com:
https://answers.microsoft.com/en-us/windows/forum/all/file-explorer-search-current-folder-option-doesnt/cbef261b-0ab0-47d9-a784-1598a550866b

Checking Feedback Hub there are currently three items open that turn up if you use "current folder" as your search phrase, and all have been open for months and note the issue is in Build 18363.  I've just added a comment to all three of them that this is still going on as of today's date.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

The purpose of education is not to validate ignorance but to overcome it.
       ~ Lawrence Krauss


moderated Re: in win10 in a folder how do you tell Win10 to delete only all the files that have a same particular extension but not the other files in that folder that have different extensions?

 

On Mon, Jun 15, 2020 at 11:32 PM, Bill White wrote:
I opened the folder Documents
Well, it also depends on how you have search itself configured.  It is important to make sure that your default is "Current Folder" rather than All Subfolders, or to switch to only search in Current Folder rather than All Subfolders.

The current default behavior is "All Subfolders."   I am having a huge problem figuring out how to either reconfigure this permanently or even to get the search to limit itself only to "Current Folder" with keyboard shortcuts.   I can get to "Current Folder" via ALT+JS,F after having run the search, but it doesn't change the results.  I can only get the results to change sometimes via "point and click" application of that ribbon control item, too.

This used to be a simple matter to reset default search behavior, as this question from 2017 on https://answers.microsoft.com/en-us/windows/forum/windows_10-files/windows-10-explorer-search-default-current-folder/fbd72e0c-880e-453d-9e85-9228767fa9de notes:
--

hey folks,

 

is there a way to set the default preference for the explorer search from "all subfolders" to "current folder"?

 

In Win7 there was an option in the "folder and search options" and in Win8 there was a RegKey "SearchSubFolders" under Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Search\Preferences.

 

In Win10 the option is not available and the RegKey has no effect.

 

Thank you in advance.

Kind regards,

Philipp
--

I'll keep looking, but so far getting a consistent "Current Folder" only result is just not happening at the moment, and I've always been able to get that to work before (and usually set that as my default, as it's the exception where I want all subfolders searched).
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

The purpose of education is not to validate ignorance but to overcome it.
       ~ Lawrence Krauss


moderated Re: in win10 in a folder how do you tell Win10 to delete only all the files that have a same particular extension but not the other files in that folder that have different extensions?

Richard Turner
 

Depending on how many levels deep the folder is.
using the command prompt, and then like the good old DOS days, do CD\foldername, and again the backslash, next folder until your crompt shows c:\ followed by the full path.
Then type del *.mp3
and they will all be deleted just in that folder.
Then type exit and hit enter to get out of the command prompt.
I'mwriting this on an iPhone with braille input, so hopefully that made sense.
If not, I can rewrite it on my computer in the morning.




Richard
"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

On Jun 15, 2020, at 8:32 PM, Bill White <billwhite92701@...> wrote:



Hi, Brian. I tried doing what you said. I opened the folder Documents, searched for files with an mp3 extension, and it gave me mp3 results from subfolders, as well as files which no longer reside in that folder.

I put into the search Window (CONTROL plus E) once the folder was open:

 

*.mp3

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Brian Vogel
Sent: Monday, June 15, 2020 8:25 PM
To: main@jfw.groups.io
Subject: Re: in win10 in a folder how do you tell Win10 to delete only all the files that have a same particular extension but not the other files in that folder that have different extensions?

 

On Mon, Jun 15, 2020 at 10:33 PM, ratshtron wrote:

open the folder and move to the first file with the particular extention and now, press and hold the ctrl key and start arrowing down through the list of files and every time you land on another file with same extention, press the spacebar to select it. be sure to continue to hold the ctrl key. once you have selected all the files with the same extention, press the delete key and the files will be deleted once you confirm you wish to delete the number of multi-files.


It is much, much easier to use the search function (CTRL+E) and enter the search criteria for all the files you want, then Select All, then delete.

So, once you're in the folder, say you want to delete all PDF files in the folder.  Hit CTRL+E then type *.pdf in the search box then hit enter.  The search will return only files in that folder that are PDF files.  Hit CTRL+A to select all, then hit the DEL key.  You're done.

Of course, the search criteria can be anything that's appropriate, so if you wanted only PDF files that start with, say, Nov, then type Nov*.pdf in the search box and hit enter.  You can use any extension and you can combine things with OR if you want, say all JPG files OR PDF files, that would be *.jpg OR *.PDF, and you'll only get files with one of those two extensions back.

Hand gathering is far more error prone.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

The purpose of education is not to validate ignorance but to overcome it.
       ~ Lawrence Krauss


moderated Re: in win10 in a folder how do you tell Win10 to delete only all the files that have a same particular extension but not the other files in that folder that have different extensions?

Bill White
 

Hi, Brian. I tried doing what you said. I opened the folder Documents, searched for files with an mp3 extension, and it gave me mp3 results from subfolders, as well as files which no longer reside in that folder.

I put into the search Window (CONTROL plus E) once the folder was open:

 

*.mp3

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Brian Vogel
Sent: Monday, June 15, 2020 8:25 PM
To: main@jfw.groups.io
Subject: Re: in win10 in a folder how do you tell Win10 to delete only all the files that have a same particular extension but not the other files in that folder that have different extensions?

 

On Mon, Jun 15, 2020 at 10:33 PM, ratshtron wrote:

open the folder and move to the first file with the particular extention and now, press and hold the ctrl key and start arrowing down through the list of files and every time you land on another file with same extention, press the spacebar to select it. be sure to continue to hold the ctrl key. once you have selected all the files with the same extention, press the delete key and the files will be deleted once you confirm you wish to delete the number of multi-files.


It is much, much easier to use the search function (CTRL+E) and enter the search criteria for all the files you want, then Select All, then delete.

So, once you're in the folder, say you want to delete all PDF files in the folder.  Hit CTRL+E then type *.pdf in the search box then hit enter.  The search will return only files in that folder that are PDF files.  Hit CTRL+A to select all, then hit the DEL key.  You're done.

Of course, the search criteria can be anything that's appropriate, so if you wanted only PDF files that start with, say, Nov, then type Nov*.pdf in the search box and hit enter.  You can use any extension and you can combine things with OR if you want, say all JPG files OR PDF files, that would be *.jpg OR *.PDF, and you'll only get files with one of those two extensions back.

Hand gathering is far more error prone.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

The purpose of education is not to validate ignorance but to overcome it.
       ~ Lawrence Krauss


moderated Re: in win10 how do you get to the command prompt?

 

Hank,

         You can hit the Windows Key, immediately type cmd, then hit Enter.  Or you can hit Windows Key+R, enter cmd in Open text box, then hit Enter.  Or, you can go to the Windows Search box and enter either the word command or just cmd, and hit enter.

          Any of the above will instantly open a Command Prompt window where you will be sitting in your HOME folder, typically C:\Users\{insert appropriate acct here} and you will have focus just after the command prompt itself.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

The purpose of education is not to validate ignorance but to overcome it.
       ~ Lawrence Krauss


moderated Re: in win10 in a folder how do you tell Win10 to delete only all the files that have a same particular extension but not the other files in that folder that have different extensions?

 

On Mon, Jun 15, 2020 at 10:33 PM, ratshtron wrote:
open the folder and move to the first file with the particular extention and now, press and hold the ctrl key and start arrowing down through the list of files and every time you land on another file with same extention, press the spacebar to select it. be sure to continue to hold the ctrl key. once you have selected all the files with the same extention, press the delete key and the files will be deleted once you confirm you wish to delete the number of multi-files.

It is much, much easier to use the search function (CTRL+E) and enter the search criteria for all the files you want, then Select All, then delete.

So, once you're in the folder, say you want to delete all PDF files in the folder.  Hit CTRL+E then type *.pdf in the search box then hit enter.  The search will return only files in that folder that are PDF files.  Hit CTRL+A to select all, then hit the DEL key.  You're done.

Of course, the search criteria can be anything that's appropriate, so if you wanted only PDF files that start with, say, Nov, then type Nov*.pdf in the search box and hit enter.  You can use any extension and you can combine things with OR if you want, say all JPG files OR PDF files, that would be *.jpg OR *.PDF, and you'll only get files with one of those two extensions back.

Hand gathering is far more error prone.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

The purpose of education is not to validate ignorance but to overcome it.
       ~ Lawrence Krauss


moderated Video Chatting on Facebook Using JAWS

Rick Miller
 

Anyone:

 

I looked up the instructions about how to video chat with a friend on Facebook.  The first thing it says is “Click in the upper right of the screen.”  Is there any way using JAWS that you can video chat with someone?

 

 

 

Rick Miller

 


moderated Re: Reading PDF Documents with Line Numbers

Chris Hill
 

When you open the document, does adobe not ask you what reading order you'd prefer?  If so, have you tried the various options? If not, maybe you should check in the edit menu for the accessibility assistant and turn the reading order feature back on.  May not help, but this sounds like what the feature should have been meant for.

On 6/15/2020 19:56, kelby carlson wrote:
In my work, I frequently have to read transcripts of proceeding where each of the lines is numbered. When I open a transcript like this in Adobe, frequently all of the line numbers will be at the top of the page and I have to keep arrowing down to get to the text. I know this is a unique problem, but is there anything JAWS can do that will help with this? Right now it takes me longer to read these documents than it should.


moderated Re: in win10 in a folder how do you tell Win10 to delete only all the files that have a same particular extension but not the other files in that folder that have different extensions?

Bill White
 

Hi, Ratshtron. I probably should have put that in, but I assumed he wanted
to delete files in a folder below his user folder. When I do a Command
Prompt, it puts me in "Owner" which is my user folder.

Bill White
billwhite92701@...

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of ratshtron
Sent: Monday, June 15, 2020 7:38 PM
To: main@jfw.groups.io
Subject: Re: in win10 in a folder how do you tell Win10 to delete only all
the files that have a same particular extension but not the other files in
that folder that have different extensions?

made one mistake, once you press windows key plus r and press enter,
you must first type in the drive letter the folder is on for
example,cd c:\ to move to the root of the c: drive. then type cd
foldername enter to open the folder.



Legend has it that on Monday 6/15/2020 09:32 PM, ratshtron via groups.io
said:
----------------------------------------
open the folder and move to the first file with the particular
extention and now, press and hold the ctrl key and start arrowing
down through the list of files and every time you land on another
file with same extention, press the spacebar to select it. be sure
to continue to hold the ctrl key. once you have selected all the
files with the same extention, press the delete key and the files
will be deleted once you confirm you wish to delete the number of
multi-files. Of course, you could also drop to a dos box by pressing
windows key plus r then type cmd and press enter. once there, you
can type the drive letter: plus the folder name to open that folder
and now, you can use the familular dos command del *.xxx where xxx
is the extention of the files. hope this helps.


Legend has it that on Monday 6/15/2020 08:43 PM, Hank William Merchant
said:
----------------------------------------

Hello,

In Win10 when you are wanting to get rid of some particular files
all with the same extension in a folder, but not the other files
with different extensions in that same folder, is there a way to
tell Win10 to in that particular folder to only delete all the
files that have that same extension that you want to delete?

Llike in the old days, when we were still using dos and in dos to
delete only all the files with a particular same extension in a
directory, the dos command once you were located in that particular
directory was the dos command delete *. and the 3 letters
corresponding to the extension you particularly wanted to delete.

If maybe someone can help me with this, this would be so very much
appreciated. Much, much thanks in advance for any help with this.








All the best,
Warmest regards,

Hank

----------------------------------------

----------------------------------------


moderated Re: in win10 in a folder how do you tell Win10 to delete only all the files that have a same particular extension but not the other files in that folder that have different extensions?

ratshtron
 

made one mistake, once you press windows key plus r and press enter, you must first type in the drive letter the folder is on for example,cd c:\ to move to the root of the c: drive. then type cd foldername enter to open the folder.



Legend has it that on Monday 6/15/2020 09:32 PM, ratshtron via groups.io said:
----------------------------------------
open the folder and move to the first file with the particular extention and now, press and hold the ctrl key and start arrowing down through the list of files and every time you land on another file with same extention, press the spacebar to select it. be sure to continue to hold the ctrl key. once you have selected all the files with the same extention, press the delete key and the files will be deleted once you confirm you wish to delete the number of multi-files. Of course, you could also drop to a dos box by pressing windows key plus r then type cmd and press enter. once there, you can type the drive letter: plus the folder name to open that folder and now, you can use the familular dos command del *.xxx where xxx is the extention of the files. hope this helps.


Legend has it that on Monday 6/15/2020 08:43 PM, Hank William Merchant said:
----------------------------------------

Hello,

In Win10 when you are wanting to get rid of some particular files all with the same extension in a folder, but not the other files with different extensions in that same folder, is there a way to tell Win10 to in that particular folder to only delete all the files that have that same extension that you want to delete?

Llike in the old days, when we were still using dos and in dos to delete only all the files with a particular same extension in a directory, the dos command once you were located in that particular directory was the dos command delete *. and the 3 letters corresponding to the extension you particularly wanted to delete.

If maybe someone can help me with this, this would be so very much appreciated. Much, much thanks in advance for any help with this.








All the best,
Warmest regards,

Hank

----------------------------------------

----------------------------------------


moderated Re: in win10 in a folder how do you tell Win10 to delete only all the files that have a same particular extension but not the other files in that folder that have different extensions?

ratshtron
 

open the folder and move to the first file with the particular extention and now, press and hold the ctrl key and start arrowing down through the list of files and every time you land on another file with same extention, press the spacebar to select it. be sure to continue to hold the ctrl key. once you have selected all the files with the same extention, press the delete key and the files will be deleted once you confirm you wish to delete the number of multi-files. Of course, you could also drop to a dos box by pressing windows key plus r then type cmd and press enter. once there, you can type the drive letter: plus the folder name to open that folder and now, you can use the familular dos command del *.xxx where xxx is the extention of the files. hope this helps.


Legend has it that on Monday 6/15/2020 08:43 PM, Hank William Merchant said:
----------------------------------------

Hello,

In Win10 when you are wanting to get rid of some particular files all with the same extension in a folder, but not the other files with different extensions in that same folder, is there a way to tell Win10 to in that particular folder to only delete all the files that have that same extension that you want to delete?

Llike in the old days, when we were still using dos and in dos to delete only all the files with a particular same extension in a directory, the dos command once you were located in that particular directory was the dos command delete *. and the 3 letters corresponding to the extension you particularly wanted to delete.

If maybe someone can help me with this, this would be so very much appreciated. Much, much thanks in advance for any help with this.








All the best,
Warmest regards,

Hank


----------------------------------------


moderated Re: in win10 how do you get to the command prompt?

Bill White
 

You can either type the Windows key, then R to run the Run dialog, then type Shell:AppsFolder,

 

or you can create a shortcut for the AppsFolder on your system, and in the target, type

 

%windir%\explorer.exe shell:Appsfolder

 

Once in the apps folder, use first-letter navigation, or arrow toward the right with Right Arrow, and find Command Prompt. Press ENTER twice, and you will be at the C: prompt. From there, you can navigate to the directory you wish, then perform the delete command.

 

You may also find Command Prompt at the search box when you press the Windows key.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Hank William Merchant
Sent: Monday, June 15, 2020 7:12 PM
To: main@jfw.groups.io
Subject: Re: in win10 how do you get to the command prompt?

 

 

Hello back Bill,

 

Thanks very much for getting back to me so soon with your very helpful info, so in win10, how does a person go to the command prompt so I can go to the particular directory that I want to delete some files in?

 

Much, much thanks for any possible help I can maybe get with this.

 

 

 

 

 

 

 

All the best,

Warmest regards,

 

Hank

 

 

From: Bill White

Sent: Monday, June 15, 2020 10:46 PM

To: main@jfw.groups.io

Subject: Re: in win10 in a folder how do you tell Win10 to delete only all the files that have a same particular extension but not the other files in that folder that have different extensions?

 

Hi, Hank. You must still do the same thing, like back in the days of DOS. You must go to Command Prompt, change to the directory, and perform the delete  *. and the 3 letters corresponding to the extension you particularly want to delete.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Hank William Merchant
Sent: Monday, June 15, 2020 6:43 PM
To: main@jfw.groups.io
Subject: Re: in win10 in a folder how do you tell Win10 to delete only all the files that have a same particular extension but not the other files in that folder that have different extensions?

 

 

Hello,

 

In Win10 when you are wanting to get rid of some particular files all with the same extension in a folder, but not the other files with different extensions in that same folder, is there a way to tell Win10 to in that particular folder to only delete all the files that have that same extension that you want to delete?

 

Llike in the old days, when we were still using dos and in dos to delete only all the files with a particular same extension in a directory, the dos command once you were located in that particular directory was the dos command delete  *. and the 3 letters corresponding to the extension you particularly wanted to delete.

 

If maybe someone can help me with this, this would be so very much appreciated. Much, much thanks in advance for any help with this.

 

 

 

 

 

 

 

 

All the best,

Warmest regards,

 

Hank