Date   

Title Bar in Outlook 2010

Jim Ronald
 

Could someone explain how to enable the Title Bar in Outlook 2010?

Thanks. Jim.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120219/7ab78d81/attachment.html>


Re: Eloquence voices missing

Chris Smart <csmart8@...>
 

What does your friend see listed when he/she brings up "select a voice profile"?

Chris
--------------------------------------------------
CTS MASTERING: PROFESSIONAL MIXING AND MASTERING!
http://www.ctsmastering.com

Dropbox: Have your stuff when you need it. 2GB is free
http://db.tt/bQ2GuIt


Re: page number of PDF

Bhavesh
 

Hi,

it is Depended upon what prefferences you have set in the adobe
reader(ctrl+K, and select reading from the tree view). set the
following settings:
infer reading pages from document,
and for large docu ments, only read the currently visible pages.

On 2/19/12, Ngoc Ly <lyvanngoc@gmail.com> wrote:
Dear friend,

Thank you very much... but after pressing ctrl+shift+n only current page
number appears in the dialogue box.

Please show me how to go to the last page and how to go to the first page of
a file in pdf.

Thank you very much



Ngoc Ly
lyvanngoc@gmail.com
-----Original Message-----
From: BHAVESH
Sent: Sunday, February 19, 2012 7:45 PM
To: The Jaws for Windows support list.
Subject: Re: page number of PDF

Hi,

once you open a PDF file, press ctrl+shift+N. whatever number will
appear in the dialogue, that is your current page number. i think at
the same time, your screen reader tells you how many pages are there.



On 2/19/12, Ngoc Ly <lyvanngoc@gmail.com> wrote:
Dear friends,

I am reading pdf file. I don't know how to read the page number.

After opening a pdf file, I want to know how many pages of the file, too.

Help me please.

Thank you very much



Ngoc Ly
lyvanngoc@gmail.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
with best regards,
Bhavesh.
Message composed on Dell vostro1440, using jaws for windows screen reader.

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
--
with best regards,
Bhavesh.
Message composed on Dell vostro1440, using jaws for windows screen reader.


Automatically announcement when a person log on to Facebook Chat (using Miranda)

Anders Boholdt-Petersen
 

Hi everyone

I have setup Miranda chat client so I can connect to the chat on Facebook,
because I not longer can access the chat via Facebook website.

In connection with installation of Miranda, I have found and installed a set
of scripts to JAWS, so Miranda should be more accessible, se more here:

http://www.blind-geek-zone.net/data/miranda%20jaws%20scripts%20setup.exe

.



It is possible to adjust Miranda or the set of scripts, so JAWS read when a
person log on to Facebook chat?



I can see that the system tree chordly announce when a person log on,
because the persons name came up, and after that disappear again.



I Using JAWS 12 and 13, and Miranda version 0.9.44.



Very thanks.



Regards,

Anders

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120219/fd86c1fb/attachment.html>


Re: page number of PDF

Ngoc Ly <lyvanngoc@...>
 

Dear friend,

Thank you very much... but after pressing ctrl+shift+n only current page number appears in the dialogue box.

Please show me how to go to the last page and how to go to the first page of a file in pdf.

Thank you very much



Ngoc Ly
lyvanngoc@gmail.com

-----Original Message-----
From: BHAVESH
Sent: Sunday, February 19, 2012 7:45 PM
To: The Jaws for Windows support list.
Subject: Re: page number of PDF

Hi,

once you open a PDF file, press ctrl+shift+N. whatever number will
appear in the dialogue, that is your current page number. i think at
the same time, your screen reader tells you how many pages are there.



On 2/19/12, Ngoc Ly <lyvanngoc@gmail.com> wrote:
Dear friends,

I am reading pdf file. I don't know how to read the page number.

After opening a pdf file, I want to know how many pages of the file, too.

Help me please.

Thank you very much



Ngoc Ly
lyvanngoc@gmail.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
with best regards,
Bhavesh.
Message composed on Dell vostro1440, using jaws for windows screen reader.

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: page number of PDF

Bhavesh
 

Hi,

once you open a PDF file, press ctrl+shift+N. whatever number will
appear in the dialogue, that is your current page number. i think at
the same time, your screen reader tells you how many pages are there.

On 2/19/12, Ngoc Ly <lyvanngoc@gmail.com> wrote:
Dear friends,

I am reading pdf file. I don't know how to read the page number.

After opening a pdf file, I want to know how many pages of the file, too.

Help me please.

Thank you very much



Ngoc Ly
lyvanngoc@gmail.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
--
with best regards,
Bhavesh.
Message composed on Dell vostro1440, using jaws for windows screen reader.


Re: Jaws acting very strange!

David <davidwhitehead1957@...>
 

Hello there;
Many folks are having issues with google page,
You may want to try;

www.startingpage.com


this is a good alternative search engine.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Brandon Keith Biggs
Sent: Saturday, February 18, 2012 6:12 PM
To: The Jaws for Windows support list.
Subject: Re: Jaws acting very strange!

Hello,
My computer came with IE9 installed as default so I had to reinstall IE8 to
work with Jaws 11. I'm not having any problem except with the I'm feeling
lucky button.
The more annoying problems are with the alt tabbing and the ctrl arrow keys
and the subject line and contact fields.
Thanks,

Brandon Keith Biggs
-----Original Message-----
From: epierce@surewest.net
Sent: Saturday, February 18, 2012 12:39 PM
To: The Jaws for Windows support list.
Subject: Re: Jaws acting very strange!

Microsoft Internet Explorer (IE) by default is 32 bit, you have to hunt
around in the Windows start menu to get to the 64 bit version of IE, so you
are probably not using it.

Jaws11 just plain does not work well with Windows 7 64 bit on some systems.

You only hope is probably to wait to upgrade to Jaws13. Sorry!

You may wish to consider re-installing Jaws11 as a last resort, but that is
not very likely to solve any problem
Thanks,

In general there are few, if any, performance benefits from using 64 bit
applications in and of themselves. The main benefit to 64 bit, given the
current Microsoft architecture, is that you can use more than 4GB of RAM
(memory). This is useful if you certain resource-intensive applications,
such as graphics programs, database applications, etc., or are a developer.

Please note that the "Home Basic" version of Windows 7 64 bit only supports
up to 8GB RAM, to use more you need "Home Premium" or to go over 16GB, any
of "Professional", "Ultimate", or "Enterprise" versions.

---- Original message ----
Date: Sat, 18 Feb 2012 12:02:12 -0800
From: jfw-bounces@lists.the-jdh.com (on behalf of "Brandon Keith Biggs"
<brandonboy13@comcast.net>)
Subject: Re: Jaws acting very strange!
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>

Hello,
I've not installed anything from windows recently. I'm on a laptop and I'm
not quite sure how to change resolution. I'm not sure if I have IE for 32
or
64 bit, didn't know there was more than one although if it did ask me I
would've chosen 64.
I'm trying to get Jaws 13, but it's probably not going to be for a while.
This laptop is new as of Christmas and I haven't changed the hardware at
all.
...


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


page number of PDF

Ngoc Ly <lyvanngoc@...>
 

Dear friends,

I am reading pdf file. I don't know how to read the page number.

After opening a pdf file, I want to know how many pages of the file, too.

Help me please.

Thank you very much



Ngoc Ly
lyvanngoc@gmail.com


Eloquence voices missing

Sameer
 

Dear Friends,

I am asking this question on behalf of a friend.

He was playing around with the various speech synthesizers & is now stuck with the Microsoft speech synthesizer. He is unable to find the Eloquence voices. Is it necessary to reinstall JAWS or is there a setting which can bring the Eloquence voices back?

He is using JAWS 11 on a Win XP computer.

Regards
Mr. Sameer Latey
Mumbai, India
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120219/4cbea746/attachment.html>


Re: Jaws acting very strange!

Bill White <billwhite92701@...>
 

Hi, Brandon. Have you tried maximizing the window when in Internet Explorer to see if it treats the buttons in a more normal way?

Thank you.
Bill White billwhite92701@dslextreme.com

----- Original Message -----
From: "Brandon Keith Biggs" <brandonboy13@comcast.net>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Saturday, February 18, 2012 3:11 PM
Subject: Re: Jaws acting very strange!


Hello,
My computer came with IE9 installed as default so I had to reinstall IE8 to work with Jaws 11. I'm not having any problem except with the I'm feeling lucky button.
The more annoying problems are with the alt tabbing and the ctrl arrow keys and the subject line and contact fields.
Thanks,

Brandon Keith Biggs
-----Original Message-----
From: epierce@surewest.net
Sent: Saturday, February 18, 2012 12:39 PM
To: The Jaws for Windows support list.
Subject: Re: Jaws acting very strange!

Microsoft Internet Explorer (IE) by default is 32 bit, you have to hunt around in the Windows start menu to get to the 64 bit version of IE, so you are probably not using it.

Jaws11 just plain does not work well with Windows 7 64 bit on some systems.

You only hope is probably to wait to upgrade to Jaws13. Sorry!

You may wish to consider re-installing Jaws11 as a last resort, but that is not very likely to solve any problem
Thanks,

In general there are few, if any, performance benefits from using 64 bit applications in and of themselves. The main benefit to 64 bit, given the current Microsoft architecture, is that you can use more than 4GB of RAM (memory). This is useful if you certain resource-intensive applications, such as graphics programs, database applications, etc., or are a developer.

Please note that the "Home Basic" version of Windows 7 64 bit only supports up to 8GB RAM, to use more you need "Home Premium" or to go over 16GB, any of "Professional", "Ultimate", or "Enterprise" versions.

---- Original message ----
Date: Sat, 18 Feb 2012 12:02:12 -0800
From: jfw-bounces@lists.the-jdh.com (on behalf of "Brandon Keith Biggs" <brandonboy13@comcast.net>)
Subject: Re: Jaws acting very strange!
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>

Hello,
I've not installed anything from windows recently. I'm on a laptop and I'm
not quite sure how to change resolution. I'm not sure if I have IE for 32 or
64 bit, didn't know there was more than one although if it did ask me I
would've chosen 64.
I'm trying to get Jaws 13, but it's probably not going to be for a while.
This laptop is new as of Christmas and I haven't changed the hardware at
all.
...


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


__________ Information from ESET NOD32 Antivirus, version of virus signature database 6895 (20120218) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus signature database 6895 (20120218) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com


Re: Jaws acting very strange!

Brandon Keith Biggs <brandonboy13@...>
 

Hello,
My computer came with IE9 installed as default so I had to reinstall IE8 to work with Jaws 11. I'm not having any problem except with the I'm feeling lucky button.
The more annoying problems are with the alt tabbing and the ctrl arrow keys and the subject line and contact fields.
Thanks,

Brandon Keith Biggs

-----Original Message-----
From: epierce@surewest.net
Sent: Saturday, February 18, 2012 12:39 PM
To: The Jaws for Windows support list.
Subject: Re: Jaws acting very strange!

Microsoft Internet Explorer (IE) by default is 32 bit, you have to hunt around in the Windows start menu to get to the 64 bit version of IE, so you are probably not using it.

Jaws11 just plain does not work well with Windows 7 64 bit on some systems.

You only hope is probably to wait to upgrade to Jaws13. Sorry!

You may wish to consider re-installing Jaws11 as a last resort, but that is not very likely to solve any problem
Thanks,

In general there are few, if any, performance benefits from using 64 bit applications in and of themselves. The main benefit to 64 bit, given the current Microsoft architecture, is that you can use more than 4GB of RAM (memory). This is useful if you certain resource-intensive applications, such as graphics programs, database applications, etc., or are a developer.

Please note that the "Home Basic" version of Windows 7 64 bit only supports up to 8GB RAM, to use more you need "Home Premium" or to go over 16GB, any of "Professional", "Ultimate", or "Enterprise" versions.

---- Original message ----
Date: Sat, 18 Feb 2012 12:02:12 -0800
From: jfw-bounces@lists.the-jdh.com (on behalf of "Brandon Keith Biggs" <brandonboy13@comcast.net>)
Subject: Re: Jaws acting very strange!
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>

Hello,
I've not installed anything from windows recently. I'm on a laptop and I'm
not quite sure how to change resolution. I'm not sure if I have IE for 32 or
64 bit, didn't know there was more than one although if it did ask me I
would've chosen 64.
I'm trying to get Jaws 13, but it's probably not going to be for a while.
This laptop is new as of Christmas and I haven't changed the hardware at
all.
...


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Jaws acting very strange!

epierce@...
 

Microsoft Internet Explorer (IE) by default is 32 bit, you have to hunt around in the Windows start menu to get to the 64 bit version of IE, so you are probably not using it.

Jaws11 just plain does not work well with Windows 7 64 bit on some systems.

You only hope is probably to wait to upgrade to Jaws13. Sorry!

You may wish to consider re-installing Jaws11 as a last resort, but that is not very likely to solve any problem.

In general there are few, if any, performance benefits from using 64 bit applications in and of themselves. The main benefit to 64 bit, given the current Microsoft architecture, is that you can use more than 4GB of RAM (memory). This is useful if you certain resource-intensive applications, such as graphics programs, database applications, etc., or are a developer.

Please note that the "Home Basic" version of Windows 7 64 bit only supports up to 8GB RAM, to use more you need "Home Premium" or to go over 16GB, any of "Professional", "Ultimate", or "Enterprise" versions.

---- Original message ----
Date: Sat, 18 Feb 2012 12:02:12 -0800
From: jfw-bounces@lists.the-jdh.com (on behalf of "Brandon Keith Biggs" <brandonboy13@comcast.net>)
Subject: Re: Jaws acting very strange!
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>

Hello,
I've not installed anything from windows recently. I'm on a laptop and I'm
not quite sure how to change resolution. I'm not sure if I have IE for 32 or
64 bit, didn't know there was more than one although if it did ask me I
would've chosen 64.
I'm trying to get Jaws 13, but it's probably not going to be for a while.
This laptop is new as of Christmas and I haven't changed the hardware at
all.
...


Re: Jaws acting very strange!

Brandon Keith Biggs <brandonboy13@...>
 

Hello,
I've not installed anything from windows recently. I'm on a laptop and I'm not quite sure how to change resolution. I'm not sure if I have IE for 32 or 64 bit, didn't know there was more than one although if it did ask me I would've chosen 64.
I'm trying to get Jaws 13, but it's probably not going to be for a while.
This laptop is new as of Christmas and I haven't changed the hardware at all.
Thanks,

Brandon Keith Biggs

-----Original Message-----
From: epierce@surewest.net
Sent: Saturday, February 18, 2012 11:40 AM
To: The Jaws for Windows support list.
Subject: Re: Jaws acting very strange!

Not surprising, I've seen similar weird symptoms with Jaws11 and Win7 64 bit and web browsers (IE8 and Firefox 3.x).

Those symptoms appeared from the beginning, and were reported to get worse over several weeks/months. We were advised to switch from a "wide screen" monitor to one that supports standard screen resolutions (perhaps 1280x1024?).

Change you change to a more "standard" resolution for testing purposes?

fyi, don't know if it just "lore", or is valid, but I was told that Jaws should always be installed last if software is being installed from scratch (e.g. when a computer is being prepared to be "re-imaged").

Did you recently update hardware drivers or change video card/ monitor?

Did you recently install software updates from Microsoft? ("Patch tuesday")

Are you using a 32 bit or 64 bit browser?

Are you using both 32 and 64 bit Java?

Is Microsoft Office installed? If so, which version?

Have you looked into upgrading to Jaws13?

---- Original message ----
Date: Fri, 17 Feb 2012 17:29:17 -0800
From: jfw-bounces@lists.the-jdh.com (on behalf of "Brandon Keith Biggs" <brandonboy13@comcast.net>)
Subject: Jaws acting very strange!
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>

Hello,
I’m using Jaws 11 on a Windows 7 64 bit computer:
...
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Jaws acting very strange!

epierce@...
 

Not surprising, I've seen similar weird symptoms with Jaws11 and Win7 64 bit and web browsers (IE8 and Firefox 3.x).

Those symptoms appeared from the beginning, and were reported to get worse over several weeks/months. We were advised to switch from a "wide screen" monitor to one that supports standard screen resolutions (perhaps 1280x1024?).

Change you change to a more "standard" resolution for testing purposes?

fyi, don't know if it just "lore", or is valid, but I was told that Jaws should always be installed last if software is being installed from scratch (e.g. when a computer is being prepared to be "re-imaged").

Did you recently update hardware drivers or change video card/ monitor?

Did you recently install software updates from Microsoft? ("Patch tuesday")

Are you using a 32 bit or 64 bit browser?

Are you using both 32 and 64 bit Java?

Is Microsoft Office installed? If so, which version?

Have you looked into upgrading to Jaws13?

---- Original message ----
Date: Fri, 17 Feb 2012 17:29:17 -0800
From: jfw-bounces@lists.the-jdh.com (on behalf of "Brandon Keith Biggs" <brandonboy13@comcast.net>)
Subject: Jaws acting very strange!
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>

Hello,
I’m using Jaws 11 on a Windows 7 64 bit computer:
...


Re: [Bulk] Jaws acting very strange!

Brandon Keith Biggs <brandonboy13@...>
 

Hello,
This has always happened, I just wanted to make sure there was no more problems I was having.
To all appearances my computer is right out of the box. I have restarted my computer multiple times and none of the problems I'm having stop.
Thanks,

Brandon Keith Biggs

-----Original Message-----
From: Farfar at His Desk
Sent: Friday, February 17, 2012 11:26 PM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] Jaws acting very strange!

Not likely graphics settings.

I presume you've rebooted and it's still the same?

Are you using a laptop? If so, have you made sure that you didn't
accidentally rotate the screen 90 or 180 degrees?


Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7


----- Original Message -----
From: "Brandon Keith Biggs" <brandonboy13@comcast.net>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Friday, February 17, 2012 17:29
Subject: [Bulk] Jaws acting very strange!


Hello,
I’m using Jaws 11 on a Windows 7 64 bit computer:
First when I’m typing in an edit box like the subject line of an email Jaws
only says “Space” when I backspace. Does this have to do with my graphics
being too high?
Also when I ctrl arrow or alt-tab, sometimes the previous window or word is
read over the current window or word for example the words are:
the man ran.
Jaws says:
The man man.

On Google when I’m in the search box I tab twice and the curser goes over
“Advertising Programs” and Jaws says: “I’m feeling lucky visited link” This
happens when Jaws automatically ends up in the edit field when the Google
page opens.

Please any help would be greatly appreciated!
Thank you,

Brandon Keith Biggs
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120217/2134c437/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Jaws 11 and Thunderbird 3.1

David Bailes
 

Hi Jim,
 
You can do it using the drag and drop functionality in Jaws. To move recipient to the left so that it's before subject:
1. select the first message in the message list.
2. route the jaws cursor to the pc cursor, insert + numpad minus.
3. press insert + left arrow a few times till you get to the column names, which will include recipient, date and subject. Note that the names of the column that indicate stuff like whether the message has an attachment will be read as a
numbered graphic.
4. With the jaws cursor on recipient, press ctrl+insert+numpad slash to start the drag and drop. Note that you have to use the left control key.
5. Press insert+left arrow till you get to subject.
6. press ctrl+insert+numpad slash again to complete the drag and drop.
7. press numpad plus to switch back to the pc cursor.

Note that if you want to move a column to the right, then when dragging, you have to move the jaws cursor to the column which is one column after the column where you want the dragged column to end up.

David.
 
original message:
Heya Folks, Just been getting around thunderbird 3.1 and find it pritty good and easy to
use, just want some advice where I can get Jaws to read and speak the sender
first rather than the subject line of an email. I checked as much as I can
but can't seem to change the Jaws reading when it says table and says my
emails, subject is always spoken first. Any help will be appreciated Cheers, Jim


Re: [Bulk] Jaws acting very strange!

Dave...
 

Not likely graphics settings.

I presume you've rebooted and it's still the same?

Are you using a laptop? If so, have you made sure that you didn't
accidentally rotate the screen 90 or 180 degrees?


Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7

----- Original Message -----
From: "Brandon Keith Biggs" <brandonboy13@comcast.net>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Friday, February 17, 2012 17:29
Subject: [Bulk] Jaws acting very strange!


Hello,
I’m using Jaws 11 on a Windows 7 64 bit computer:
First when I’m typing in an edit box like the subject line of an email Jaws
only says “Space” when I backspace. Does this have to do with my graphics
being too high?
Also when I ctrl arrow or alt-tab, sometimes the previous window or word is
read over the current window or word for example the words are:
the man ran.
Jaws says:
The man man.

On Google when I’m in the search box I tab twice and the curser goes over
“Advertising Programs” and Jaws says: “I’m feeling lucky visited link” This
happens when Jaws automatically ends up in the edit field when the Google
page opens.

Please any help would be greatly appreciated!
Thank you,

Brandon Keith Biggs
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120217/2134c437/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Jaws acting very strange!

Brandon Keith Biggs <brandonboy13@...>
 

Hello,
I’m using Jaws 11 on a Windows 7 64 bit computer:
First when I’m typing in an edit box like the subject line of an email Jaws only says “Space” when I backspace. Does this have to do with my graphics being too high?
Also when I ctrl arrow or alt-tab, sometimes the previous window or word is read over the current window or word for example the words are:
the man ran.
Jaws says:
The man man.

On Google when I’m in the search box I tab twice and the curser goes over “Advertising Programs” and Jaws says: “I’m feeling lucky visited link” This happens when Jaws automatically ends up in the edit field when the Google page opens.

Please any help would be greatly appreciated!
Thank you,

Brandon Keith Biggs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120217/2134c437/attachment.html>


Re: [Bulk] [Bulk] Get Pictures with emails

John ESherrer
 

Hi Dave
I found that the context menu gives me that option to open with pictures.
John

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Farfar at His Desk
Sent: Friday, February 17, 2012 12:15 PM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] RE: [Bulk] Get Pictures with emails

John,

Presuming that you're viewing messages as html and not as plain text:

If they're embedded you might be able to use Ctrl+shift+o to list objects,
select one, and then when you've landed back in the message, Press
Applications (or Shift+F10) and see if the context menu allows you to
print, view, or save the picture.

Make sure you don't move the cursor after selecting the object and returning

to the message body.


Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7


----- Original Message -----
From: "John Sherrer" <john@whitecane.org>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Friday, February 17, 2012 08:09
Subject: [Bulk] RE: [Bulk] Get Pictures with emails


What I want are pictures that are part of an email, not an attachment.
But I will shave what you wrote here.
John

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Farfar at His Desk
Sent: Friday, February 17, 2012 1:08 AM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] Get Pictures with emails

John,

Easiest way is right from the message list.

Press Applications key (or Shift+F10) and arrow down to view attachments.
Then right arrow. Single or multiple attachments are in that list. Enter on
one to "view" or "read". Once you're in the other application you should be
able to save it.

Then repeat for other attachments.

Another method to try:
I'm going to presume that you're not using the virtual ribbon.

From the open message, Alt and then the 1 from the number row should bring
up a dialog to save attachments. Alt + a separate number is part of the
Quick Access Toolbar that comes with the Ribbon.

I'm pretty sure that save attachments is linked to this shortcut.

Another way:
From the message body, Shift tab once and you should land in the attachments
area (before you get to the subject line).

Arrow left and you should hear the attachment name spoken in a higher voice.

Then press the applications key (or Shift+f10) and select save to save the
pictures to your drive.

Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7


----- Original Message -----
From: "John Sherrer" <john@whitecane.org>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Thursday, February 16, 2012 21:51
Subject: [Bulk] Get Pictures with emails


I am using OutLook 2007, and JFW 13.
When I open an email, I will hear the option to download the pictgures that
come with the email, but I do not know how to select this option.
John


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] [Bulk] Get Pictures with emails

Dave...
 

John,

Presuming that you're viewing messages as html and not as plain text:

If they're embedded you might be able to use Ctrl+shift+o to list objects,
select one, and then when you've landed back in the message, Press
Applications (or Shift+F10) and see if the context menu allows you to
print, view, or save the picture.

Make sure you don't move the cursor after selecting the object and returning
to the message body.


Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7

----- Original Message -----
From: "John Sherrer" <john@whitecane.org>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Friday, February 17, 2012 08:09
Subject: [Bulk] RE: [Bulk] Get Pictures with emails


What I want are pictures that are part of an email, not an attachment.
But I will shave what you wrote here.
John

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Farfar at His Desk
Sent: Friday, February 17, 2012 1:08 AM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] Get Pictures with emails

John,

Easiest way is right from the message list.

Press Applications key (or Shift+F10) and arrow down to view attachments.
Then right arrow. Single or multiple attachments are in that list. Enter on
one to "view" or "read". Once you're in the other application you should be
able to save it.

Then repeat for other attachments.

Another method to try:
I'm going to presume that you're not using the virtual ribbon.

From the open message, Alt and then the 1 from the number row should bring
up a dialog to save attachments. Alt + a separate number is part of the
Quick Access Toolbar that comes with the Ribbon.

I'm pretty sure that save attachments is linked to this shortcut.

Another way:
From the message body, Shift tab once and you should land in the attachments
area (before you get to the subject line).

Arrow left and you should hear the attachment name spoken in a higher voice.

Then press the applications key (or Shift+f10) and select save to save the
pictures to your drive.

Dave Carlson
Tastefully composed and transmitted from somewhere in the Western United
States, using a Dell Latitude E6520 and Windows 7


----- Original Message -----
From: "John Sherrer" <john@whitecane.org>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Thursday, February 16, 2012 21:51
Subject: [Bulk] Get Pictures with emails


I am using OutLook 2007, and JFW 13.
When I open an email, I will hear the option to download the pictgures that
come with the email, but I do not know how to select this option.
John


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com