Date   
moderated Re: JAWS is silant when there is a date in a line of text.

Richard
 

How about using the manage applications settings from within Jaws?

HTH,
Rick

----- Original Message -----
From: "Mike B" <mb69mach1@...>
To: <main@jfw.groups.io>
Sent: Wednesday, March 11, 2020 8:11 AM
Subject: Re: JAWS is silant when there is a date in a line of text.


Marty,

I guess the way to start is by removing modified settings files from the ENU
folder 1 at a time until you you find the 1 causing the problem. Then open
that file to see if you can pinpoint the particular setting within the file.
Don't delete the files you take out of the ENU folder just cut them out and
save them somewhere you can access them.

Take care. Mike. Sent from my iBarstool. Go dodgers!

----- Original Message -----
From: Marty Hutchings
To: main@jfw.groups.io
Sent: Tuesday, March 10, 2020 9:44 PM
Subject: Re: JAWS is silant when there is a date in a line of text.


Mike, I opened up an email that I had sent out that had a date in a line
that JAWS was not reading. I then pressed the JAWS key and Space bar and Z.
A second later, JAWS was reading the missing line of text. Now, how do I
figure out which custom setting is causing the problem? Weird!

Love in Christ
Marty
For our struggle is not against flesh and blood, but against the rulers,
against the powers, against the world forces of this darkness, against the
spiritual forces of wickedness in the heavenly places.
Therefore, take up the full armor of God, so that you will be able to resist
in the evil day, and having done everything, to stand firm.
Ephesians 6:12, 13


From: Mike B
Sent: Tuesday, March 10, 2020 7:34 PM
To: main@jfw.groups.io
Subject: Re: JAWS is silent when there is a date in a line of text.

Here's another thought / guess. Did you make any changes to the Jaws
default dictionary in Jaws 18 that might cause this problem? If you did
something to the JFD in Jaws18, that would have carried over to Jaws2019 if
you imported your settings from J18 to J2019.

Take care. Mike. Sent from my iBarstool. Go dodgers!

----- Original Message -----
From: Marty Hutchings
To: main@jfw.groups.io
Sent: Monday, March 09, 2020 11:35 AM
Subject: JAWS is silant when there is a date in a line of text.

I am using JAWS 2019, Windows 7 and office 2007 and Windows Live Mail. Each
time that I type a date like March 22 in a word document or an email, JAWS
will not read anything in that line of text where the date is. It doesn't
say anything at all. This has been happening for a while, it even happened
with JAWS 18. Has anyone else experienced this?

moderated Re: Outlook 2016: Is it possible to remove items from the addresses autocompletion list?

 

I have someone for whom I've done custom scripting work write to me over the last several days saying the scripts that had been fine for well over a year now suddenly stopped working.  The version where they stopped working:  Microsoft Outlook Subscription Version 16.0.12527.20242

Rolling back to Microsoft Outlook Subscription Version 16.0.12527.20194 brought 'em back to life.

I have actual, locally installed, Office 2016 which includes Outlook.  Office 365, while sharing a lot of DNA with Office 2016 and 2019, is still a different animal that could have different bugs introduced.

When I go into the File Tab, Office Account Tab, and look under About Outlook it says that it's on Version 2002 (Build 12527.20242 Click-to-Run).  My Office is Office Professional Plus 2016.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: Outlook 2016: Is it possible to remove items from the addresses autocompletion list?

Sharon Ballantyne
 

I am not experiencing this full deletion as some others have noted. The “deleted” address entry is back in the list the next time I go to type in an address in the autocompletion options.

Running windows 10 latest Jaws 2020 and Outlook office 365.

I cannot find any settings or anything that appears needing to be checked or toggled or anything. 

Glad to know some folks have found success.

Thanks for the help offered.

Sharon

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Vogel
Sent: Wednesday, March 11, 2020 2:45 PM
To: main@jfw.groups.io
Subject: Re: Outlook 2016: Is it possible to remove items from the addresses autocompletion list?

 

All I need to do, as Cher noted, is arrow down through the autocomplete list that pops up after I've typed a character or two to limit the list, and hit the Delete key on any item I land on that I want eliminated from the autocomplete list.   They disappear immediately, and if I open another compose window and start entering the same character(s) in the To, CC, or BCC fields those addresses that I deleted remain gone.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: Outlook 2016: Is it possible to remove items from the addresses autocompletion list?

 

All I need to do, as Cher noted, is arrow down through the autocomplete list that pops up after I've typed a character or two to limit the list, and hit the Delete key on any item I land on that I want eliminated from the autocomplete list.   They disappear immediately, and if I open another compose window and start entering the same character(s) in the To, CC, or BCC fields those addresses that I deleted remain gone.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: Outlook 2016: Is it possible to remove items from the addresses autocompletion list?

Don & Cher
 

Don’t press enter on the one you want to remove- just hit delete. HTH.

 

Cher

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Delaunay Christophe
Sent: Wednesday, March 11, 2020 4:50 AM
To: main@jfw.groups.io
Subject: Re: Outlook 2016: Is it possible to remove items from the addresses autocompletion list?

 

Hi George,

 

Here is what happens in the Outlook 365 app when I try to apply your advice:

 

  1. I opened a new message to perform the test by pressing <ctrl+n>.
  2. In the “To:” field of this message, I typed the first letters of an address I want to remove. I then heard a small jingle and the suggestion list was popped up.
  3. Since the address I wanted to delete was not the first one suggested, I down arrowad to it and typed <enter>.
  4. For sure, this address has been added to the “To:” field. Therefore, I typed the left arrow until Jaws said me it has been selected.
  5. At this time, when I pressed the <delete> key, this address was removed from my “To:” field.
  6. After also removing the remaining semicolon and extra space character from the “To:” field, I retyped the first letters I typed at step (2).
  7. I then arrowed down and noticed that although the address was removed from the “To:” field at step (5), it still remains in the suggested list.

I’d also like to thank the people who suggested me to remove these unwanted addresses from some address book but it seems that these addresses do not belong to any of my address books.

 

Many thanks. Have a nice day. Chris D

 

From: main@jfw.groups.io <main@...> On Behalf Of george b via Groups.Io
Sent: Tuesday, March 10, 2020 5:32 PM
To: main@jfw.groups.io
Subject: Re: Outlook 2016: Is it possible to remove items from the addresses autocompletion list?

 

When you get the email you want to remove by typing it in the field you need to hit enter to put it in the field.

 

Then you need to left arrow to it is selected or red to you and then hit deleate.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Delaunay Christophe
Sent: March 10, 2020 9:26
To: main@jfw.groups.io
Subject: Re: Outlook 2016: Is it possible to remove items from the addresses autocompletion list?

 

Hi Adrian, Thom and all,

 

Thanks to all for your fast responses. So, since it works for yyou, I tried with different screen readers, in case it could be a problem with my jaws configuration.

 

Neither NVDA, nor the windows 10 narrator could solve my problem. Here is an illustration of what I am trying to do:

 

  1. I create a new mail by pressing <ctrl+n>.
  2. In the “To:” field, I begin typing the first letters of the address I want to remove.
  3. I press the down or up arrow keys one or more times until the screen reader speaks me the address I want. For Jaws or NVDA, which have braille support, I also can read the suggestion on my braille display.
  4. If I press the <delete> key, the suggested address disappears from my braille display and only the letters I typed remain in the “To:” field. However, when I arrow up and down to see more suggested addresses, the one I hoped to remove by pressing <delete> while the screen reader was saying it still appears.

So, is there an outlook configuration setting to change for this to work for me like it does for you please?

 

Many thanks. Have a nice day. Chris D

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Adrian Spratt via Groups.Io
Sent: Tuesday, March 10, 2020 3:31 PM
To: main@jfw.groups.io
Subject: Re: Outlook 2016: Is it possible to remove items from the addresses autocompletion list?

 

** CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe. **

 

In Outlook 2016, the method that works for me is to set up a new message, then type the first letter of the email address I want to delete. I arrow down through the resulting list and, when I have focus on the address, I press the delete key.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ashleigh Piccinino
Sent: Tuesday, March 10, 2020 10:15 AM
To: main@jfw.groups.io
Subject: Re: Outlook 2016: Is it possible to remove items from the addresses autocompletion list?

 

It doesn’t seem to work in the mail app either, as I’m wanting to get rid of some contacts I never use any more. Any help would be appreciated.

Ashleigh Piccinino

 

Sent from Mail for Windows 10

 

From: Delaunay Christophe
Sent: Tuesday, March 10, 2020 8:56 AM
To: jfw@groups.io
Subject: Outlook 2016: Is it possible to remove items from the addresses autocompletion list?

 

Hi all,

 

With Jaws 2020, I’d like to know whether there is a way to remove one or more items from the address autocompletion list of Microsoft Outlook 365.

 

With older Outlook versions like 2010, and older versions of Jaws, I could select one no more wanted address and type the <delete> key instead of the <tab> key and it was removed from the autocompletion list. But now, this does not seem to work with the Outlook 2016 app which was installed by my subscription to Office 365, and Jaws version 2020.2001.70.

 

Many thanks in advance for any advice. Have a nice day. Chris D

 

moderated Re: Searching the JAWS Group Archive

Stan Bobbitt
 

Thank you Brian. I just downloaded it myself.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Leo
Sent: Wednesday, March 11, 2020 2:14 PM
To: main@jfw.groups.io
Subject: Re: Searching the JAWS Group Archive

 

Hi again Brian,

thank you for your help, I downloaded your tutorial few minutes ago and I will have it in mind for

future inquires.

 

Best,
   Leo

On 3/11/2020 10:06 AM, Brian Vogel wrote:

Since I mentioned this earlier this morning, I decided to modify one of my other tutorials to be specific to the JAWS group.  So, when you "know in your bones" that a question you're about to ask is very likely to have been asked and answered, possibly multiple times, consider taking a cruise through the group archive before asking it again.
----------------------------------------------

Searching the Group Archive

Option 1 – Using the Groups.io Archive Search Page

1.        Navigate to the archive search page:  https://jfw.groups.io/g/main/search

2.      Enter your search terms in the Search edit box:  [term1 term2 term3] without the square brackets, as an example.

3.       Activate the Search button.

4.      Results will be returned as a list of messages.  If you prefer to have it presented as a list of topics, then:

a.      Activate the Tools button.

b.      Check the Collapse Topics checkbox.  You’re probably done, but for additional options see step 4c, otherwise, go to step 5.

c.       If you so desire there are additional options, a dropdown that allows you to limit the date range for the messages, which defaults to Any Time, a checkbox for Exclude signatures, which will omit signature text from the search, and a Clear button, which will set all of the previously mentioned additional options back to their defaults:  Any time and both checkboxes unchecked.

5.      Use your screen reader’s option for showing a list of links.  Find the next page link in that list, then what immediately follows that is a list of messages (or topics) each of which will be immediately followed by the link to the member profile of the member that wrote the message or initiated the topic.  Down arrowing through allows you to review the results you’re actually interested in very quickly.  The key is getting yourself to that next page link before starting to down arrow.

6.      Once you open a message or topic, the easiest way to get past all of the navigation controls is to open a list of headings (or use the H single letter navigation to get there).

 

Option 2 – Using the web search engine of your choosing

1.        Navigate to the page of the search engine of your choosing, e.g., Google, DuckDuckGo, Yahoo, etc.

2.      In the edit box for your search terms, put in the keywords (or quote enclosed phrases) you’re looking for first.  Immediately follow those with exactly this, site:jfw.groups.io/g/main/    That tells the search engine to limit itself to searching the site that immediately follows the site: operator (no space after that colon).  Run the search.  You can also, if you prefer, put the site: information as the first search term; it doesn’t matter if it’s at the beginning, in the middle, or at the end, just that it’s present.

3.       Use your screen reader’s option for showing a list of headings, as all web search engines I have used return the individual web pages returned as a list of headings.  Review those headings to review what’s been returned.  You can also use the single letter navigation command for headings (typically H) to jump from heading to heading [result to result].

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: Searching the JAWS Group Archive

Leo
 

Hi again Brian,

thank you for your help, I downloaded your tutorial few minutes ago and I will have it in mind for

future inquires.


Best,
   Leo
On 3/11/2020 10:06 AM, Brian Vogel wrote:

Since I mentioned this earlier this morning, I decided to modify one of my other tutorials to be specific to the JAWS group.  So, when you "know in your bones" that a question you're about to ask is very likely to have been asked and answered, possibly multiple times, consider taking a cruise through the group archive before asking it again.
----------------------------------------------

Searching the Group Archive

Option 1 – Using the Groups.io Archive Search Page

1.        Navigate to the archive search page:  https://jfw.groups.io/g/main/search

2.      Enter your search terms in the Search edit box:  [term1 term2 term3] without the square brackets, as an example.

3.       Activate the Search button.

4.      Results will be returned as a list of messages.  If you prefer to have it presented as a list of topics, then:

a.      Activate the Tools button.

b.      Check the Collapse Topics checkbox.  You’re probably done, but for additional options see step 4c, otherwise, go to step 5.

c.       If you so desire there are additional options, a dropdown that allows you to limit the date range for the messages, which defaults to Any Time, a checkbox for Exclude signatures, which will omit signature text from the search, and a Clear button, which will set all of the previously mentioned additional options back to their defaults:  Any time and both checkboxes unchecked.

5.      Use your screen reader’s option for showing a list of links.  Find the next page link in that list, then what immediately follows that is a list of messages (or topics) each of which will be immediately followed by the link to the member profile of the member that wrote the message or initiated the topic.  Down arrowing through allows you to review the results you’re actually interested in very quickly.  The key is getting yourself to that next page link before starting to down arrow.

6.      Once you open a message or topic, the easiest way to get past all of the navigation controls is to open a list of headings (or use the H single letter navigation to get there).

 

Option 2 – Using the web search engine of your choosing

1.        Navigate to the page of the search engine of your choosing, e.g., Google, DuckDuckGo, Yahoo, etc.

2.      In the edit box for your search terms, put in the keywords (or quote enclosed phrases) you’re looking for first.  Immediately follow those with exactly this, site:jfw.groups.io/g/main/    That tells the search engine to limit itself to searching the site that immediately follows the site: operator (no space after that colon).  Run the search.  You can also, if you prefer, put the site: information as the first search term; it doesn’t matter if it’s at the beginning, in the middle, or at the end, just that it’s present.

3.       Use your screen reader’s option for showing a list of headings, as all web search engines I have used return the individual web pages returned as a list of headings.  Review those headings to review what’s been returned.  You can also use the single letter navigation command for headings (typically H) to jump from heading to heading [result to result].

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: re arranging columns in thunderbird

Leo
 

HI Mario,

I DID AS YOU TOLD ME TO DO, AND IT WORKED!

Now I have just switched back to jaws and everything goes great. Thanks for the heads up!


Best,
   Leo
On 3/11/2020 9:16 AM, Mario wrote:

Leo, when I setup TB for the first time, I was a bit annoyed that there isn't a simple way to do this thru TB (I believe there is, but no one discovered how to yet), so I used an addon for NVDA that simplifies rearranging the order of column headers. so if you have NVDA, install the addon (the one for Mozilla enhancements) and issue the keystroke to rearrange the columns the way you like.

I know you are using JAWS, but I think it is better to make the change via TB because the change will be there as opposed to being screen reader dependant.

-------- Original Message --------
From: Leo [mailto:literophilus@...]
To: main@jfw.groups.io
Date: Wednesday, March 11, 2020, 9:21 AM
Subject: re arranging columns in thunderbird
Hi everyone,

I want to have jaws telling me the correspondent  info, ((the sender),
before everything else.

Time back, I did it using  the customize list view, but now I find it
rather confusing,because I can't figure  out

the location of the columns in the dialogue box that pops up when I  go
through all the options of customize list view.

In previous versions of jaws, the columns were listed, so all I had to
do was to select a column and tab to find the options to move up or move
down, according to what I wanted.

can this be done now?

I'm using jaws 2020 and latest thundderbird.

--

--
Best,
    Leo






moderated Re: re arranging columns in thunderbird

Leo
 

hmm, I'm currently using Thunderbird Version 68.5.0, and I have just rearranged order column using the nvda's addon. Now, I have switched to jaws 2020 and it perfectly announces unread for new incoming messages.



Best,
   Leo
On 3/11/2020 11:25 AM, Robert Cole via Groups.Io wrote:

Hi,

I was able to arange colums with the NVDA Add-On for Thunder Bird 60.9.1

But no matter what I did, even after having a sighted person drag the colum for me, Thunder Bird 68 will not say Unread for new emails.

So I whent back to the previous version.


On 3/11/2020 11:16 AM, Mario wrote:
Leo, when I setup TB for the first time, I was a bit annoyed that there isn't a simple way to do this thru TB (I believe there is, but no one discovered how to yet), so I used an addon for NVDA that simplifies rearranging the order of column headers. so if you have NVDA, install the addon (the one for Mozilla enhancements) and issue the keystroke to rearrange the columns the way you like.

I know you are using JAWS, but I think it is better to make the change via TB because the change will be there as opposed to being screen reader dependant.

-------- Original Message --------
From: Leo [mailto:literophilus@...]
To: main@jfw.groups.io
Date: Wednesday, March 11, 2020, 9:21 AM
Subject: re arranging columns in thunderbird
Hi everyone,

I want to have jaws telling me the correspondent  info, ((the sender),
before everything else.

Time back, I did it using  the customize list view, but now I find it
rather confusing,because I can't figure  out

the location of the columns in the dialogue box that pops up when I  go
through all the options of customize list view.

In previous versions of jaws, the columns were listed, so all I had to
do was to select a column and tab to find the options to move up or move
down, according to what I wanted.

can this be done now?

I'm using jaws 2020 and latest thundderbird.

-- 

-- 
Best,
    Leo









moderated Re: re arranging columns in thunderbird

 

On Wed, Mar 11, 2020 at 01:26 PM, Robert Cole wrote:
But no matter what I did, even after having a sighted person drag the colum for me, Thunder Bird 68 will not say Unread for new emails.
Works fine for me, just a data point.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: re arranging columns in thunderbird

Robert Cole
 

Hi,

I was able to arange colums with the NVDA Add-On for Thunder Bird 60.9.1

But no matter what I did, even after having a sighted person drag the colum for me, Thunder Bird 68 will not say Unread for new emails.

So I whent back to the previous version.

On 3/11/2020 11:16 AM, Mario wrote:
Leo, when I setup TB for the first time, I was a bit annoyed that there isn't a simple way to do this thru TB (I believe there is, but no one discovered how to yet), so I used an addon for NVDA that simplifies rearranging the order of column headers. so if you have NVDA, install the addon (the one for Mozilla enhancements) and issue the keystroke to rearrange the columns the way you like.

I know you are using JAWS, but I think it is better to make the change via TB because the change will be there as opposed to being screen reader dependant.

-------- Original Message --------
From: Leo [mailto:@Literophilus]
To: main@jfw.groups.io
Date: Wednesday, March 11, 2020, 9:21 AM
Subject: re arranging columns in thunderbird
Hi everyone,

I want to have jaws telling me the correspondent  info, ((the sender),
before everything else.

Time back, I did it using  the customize list view, but now I find it
rather confusing,because I can't figure  out

the location of the columns in the dialogue box that pops up when I  go
through all the options of customize list view.

In previous versions of jaws, the columns were listed, so all I had to
do was to select a column and tab to find the options to move up or move
down, according to what I wanted.

can this be done now?

I'm using jaws 2020 and latest thundderbird.

--

--
Best,
    Leo




moderated Re: Question regarding searching:

 

You'll get no argument from me with regard to the typing plus autocomplete crosstalk going on being distracting.   Hence the reason when I know that someone wants as close to silence (you probably do want words to be announced as you complete them) as you can get and a search is complex to formulate your search criteria either in a text editor or word processor, then copy and paste.

Everyone has their own preferences, which is fine, but when it comes to turning off autocomplete that has certain ramifications that may not have been considered.  Sometimes using workarounds turns out to be preferable, sometimes not.  Just laying out some options, as are you.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: Question regarding searching:

Glenn / Lenny
 


It is convenient, I agree, but it is sometimes distracting to hear it while listening to what you type, and if you are thinking of the search terms as well.
Glenn

----- Original Message -----
Sent: Wednesday, March 11, 2020 11:52 AM
Subject: Re: Question regarding searching:

On Wed, Mar 11, 2020 at 12:46 PM, Glenn / Lenny wrote:
Use inline AutoComplete in the Internet Explorer Address
And if the issue is autocomplete in the address box, then actually navigating to your preferred search engine's own webpage, and entering the information in the search box presented, is another thing to try.

For myself, I would never want autocomplete off in the address box, as it's so darned convenient.  I generally avoid using the address box as a search box, but not always.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: Question regarding searching:

 

On Wed, Mar 11, 2020 at 12:46 PM, Glenn / Lenny wrote:
Use inline AutoComplete in the Internet Explorer Address
And if the issue is autocomplete in the address box, then actually navigating to your preferred search engine's own webpage, and entering the information in the search box presented, is another thing to try.

For myself, I would never want autocomplete off in the address box, as it's so darned convenient.  I generally avoid using the address box as a search box, but not always.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: Question regarding searching:

Glenn / Lenny
 

I think this is the answer to the original question:
In-line auto complete needs to be unchecked in advanced settings.
Do alt T and up arrow to options and enter, and control tab to the advanced page.
When there tab twice to the list of settings.
You will arrow to:
Use inline AutoComplete in the Internet Explorer Address
and uncheck it with the space bar if it says "on".
Here's the entire list of items:
Internet Options
AdvancedGeneral Security Privacy Content Connections Programs
Settings
Enable FTP folder view (outside of Internet Explorer)-ON
Enable Suggested Sites-OFF
Enable third-party browser extensions-ON*
Enable visual styles on buttons and controls in webpages-
Go to an intranet site for a single word entry in the Addre
Load sites and content in the background to optimize perf
Notify when downloads complete-OFF
Show friendly HTTP error messages-ON
Underline links
Always-ON
Hover-OFF
Never-OFF
Use inline AutoComplete in File Explorer and Run Dialog-O
Use inline AutoComplete in the Internet Explorer Address
*Takes effect after you restart your computer
Restore advanced settings
Reset Internet Explorer settings
Resets Internet Explorer's settings to their default  Reset...condition.
You should only use this if your browser is in an unusable state.
OK Cancel Apply

----- Original Message -----
Sent: Wednesday, March 11, 2020 10:07 AM
Subject: Re: Question regarding searching:

I wonder if the issue is specific to the browser and search engine being used. The reason I stayed this is because I have never run into this issue, however I do not use ie 11.

Can a test be done using either Google chrome or Firefox and then going to www.google.com

And then see if the issue persists.

If you do not have fire fox or Google Chrome installed, just do a search for the downlights site and then install.

Thanks,abraham 

On Mar 11,e 2020, at 4:59 AM, Angel <angel238@...> wrote:

I employ IE 11, I think, as my browser.  When I search for something on the internet:  Jaws reads a continuous list of choices, as I am writing my search term

  Which is most annoying.  I should like Jaws to remain silent.  As I am typing the search term.  That I might not be distracted.  While writing my search terms.  How can I cause Jaws not to speak.  While attempting to write search terms?

Sent from Mail for Windows 10


Virus-free. www.avast.com

moderated Re: presence unknown in Outlook 2016

 

ALT+H,CV   Home Ribbon, Current View Group.   I'd imagine the name of the current view will be announced, as NVDA announces it's in a list and that list view is selected.  There are, of course, other views in that list that could be selected, and if he's got another in use, that's what will be announced.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: presence unknown in Outlook 2016

Mario
 

how does he check what view he's using? I need the keystrokes to direct me to help him. I know the names are in ascending order by first name last name.

-------- Original Message --------
From: Brian Vogel [mailto:@britechguy]
To: main@jfw.groups.io
Date: Wednesday, March 11, 2020, 12:02 PM
Subject: presence unknown in Outlook 2016
Mario,

          Just managed to get back to looking at Contacts in Outlook
2016.  What View is she using?

I use list view by default, but even if I go to create another view from
scratch the default sort initially is by File As, Ascending, and for
individuals the File As is last name first.

--

Brian *-*Windows 10 Pro, 64-Bit, Version 1909, Build 18363

*/Tolerance is the positive and cordial effort to understand another's
beliefs, practices, and habits without necessarily sharing or accepting
them./*

        ~ Joshua Liebman

moderated Re: Searching the JAWS Group Archive

 

Step-by-step instructions, in MS-Word format, downloadable from:  Searching the JAWS Group Archive

 

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Searching the JAWS Group Archive

 

Since I mentioned this earlier this morning, I decided to modify one of my other tutorials to be specific to the JAWS group.  So, when you "know in your bones" that a question you're about to ask is very likely to have been asked and answered, possibly multiple times, consider taking a cruise through the group archive before asking it again.
----------------------------------------------

Searching the Group Archive

Option 1 – Using the Groups.io Archive Search Page

1.        Navigate to the archive search page:  https://jfw.groups.io/g/main/search

2.      Enter your search terms in the Search edit box:  [term1 term2 term3] without the square brackets, as an example.

3.       Activate the Search button.

4.      Results will be returned as a list of messages.  If you prefer to have it presented as a list of topics, then:

a.      Activate the Tools button.

b.      Check the Collapse Topics checkbox.  You’re probably done, but for additional options see step 4c, otherwise, go to step 5.

c.       If you so desire there are additional options, a dropdown that allows you to limit the date range for the messages, which defaults to Any Time, a checkbox for Exclude signatures, which will omit signature text from the search, and a Clear button, which will set all of the previously mentioned additional options back to their defaults:  Any time and both checkboxes unchecked.

5.      Use your screen reader’s option for showing a list of links.  Find the next page link in that list, then what immediately follows that is a list of messages (or topics) each of which will be immediately followed by the link to the member profile of the member that wrote the message or initiated the topic.  Down arrowing through allows you to review the results you’re actually interested in very quickly.  The key is getting yourself to that next page link before starting to down arrow.

6.      Once you open a message or topic, the easiest way to get past all of the navigation controls is to open a list of headings (or use the H single letter navigation to get there).

 

Option 2 – Using the web search engine of your choosing

1.        Navigate to the page of the search engine of your choosing, e.g., Google, DuckDuckGo, Yahoo, etc.

2.      In the edit box for your search terms, put in the keywords (or quote enclosed phrases) you’re looking for first.  Immediately follow those with exactly this, site:jfw.groups.io/g/main/    That tells the search engine to limit itself to searching the site that immediately follows the site: operator (no space after that colon).  Run the search.  You can also, if you prefer, put the site: information as the first search term; it doesn’t matter if it’s at the beginning, in the middle, or at the end, just that it’s present.

3.       Use your screen reader’s option for showing a list of headings, as all web search engines I have used return the individual web pages returned as a list of headings.  Review those headings to review what’s been returned.  You can also use the single letter navigation command for headings (typically H) to jump from heading to heading [result to result].

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: presence unknown in Outlook 2016

 

Mario,

          Just managed to get back to looking at Contacts in Outlook 2016.  What View is she using? 

I use list view by default, but even if I go to create another view from scratch the default sort initially is by File As, Ascending, and for individuals the File As is last name first.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman