On Mar 6, 2020, at 3:21 PM, Jessica D via Groups.Io <jldail13@...> wrote:



Hi,

It gave me a ton of info.

What do I need?

 

 

Microsoft Windows [Version 10.0.18362.657]

(c) 2019 Microsoft Corporation. All rights reserved.

 

C:\Users\dell>ipconfig

 

Windows IP Configuration

 

 

Ethernet adapter Ethernet:

 

   Connection-specific DNS Suffix  . : hsd1.mi.comcast.net

   IPv6 Address. . . . . . . . . . . : 2603:3015:bc6:6000::aae4

   IPv6 Address. . . . . . . . . . . : 2603:3015:bc6:6000:8403:f16:eb45:6de7

   Temporary IPv6 Address. . . . . . : 2603:3015:bc6:6000:9862:6eb9:20d9:f370

   Link-local IPv6 Address . . . . . : fe80::8403:f16:eb45:6de7%8

   IPv4 Address. . . . . . . . . . . : 10.1.10.188

   Subnet Mask . . . . . . . . . . . : 255.255.255.0

   Default Gateway . . . . . . . . . : fe80::c63:daff:fefb:9d94%8

                                       10.1.10.1

 

C:\Users\dell>

 

Thanks,

 

Jessica

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Randy Barnett
Sent: Friday, March 6, 2020 2:43 PM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

 

Just type ipconfig in the command line and it will give you all the relevant info for your network.

On 3/6/2020 8:10 AM, Jessica D wrote:

Hi

Thanks, now it wants a domain/username, so how do I find that? 

 

Thanks, Jessica

 

On Mar 6, 2020, at 11:03 AM, Brian Vogel <britechguy@...> wrote:

I presume you're looking for the IP address on your local area network.  I find it much easier to do this on the machine where I want it by running the following command sequence under command prompt:

ipconfig | findstr IPv4

The IPv4 must be entered with the first two characters upper case, and the v in lower case, for this to work correctly.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

Just type ipconfig in the command line and it will give you all the relevant info for your network.

Hi

Thanks, now it wants a domain/username, so how do I find that? 

 

Thanks, Jessica

 

On Mar 6, 2020, at 11:03 AM, Brian Vogel <britechguy@...> wrote:

I presume you're looking for the IP address on your local area network.  I find it much easier to do this on the machine where I want it by running the following command sequence under command prompt:

ipconfig | findstr IPv4

The IPv4 must be entered with the first two characters upper case, and the v in lower case, for this to work correctly.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Friday, March 6, 2020 2:07 PM
To: main@jfw.groups.io; main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

----- Original Message -----

From: Randy Barnett

To: main@jfw.groups.io

Sent: Friday, March 06, 2020 1:42 PM

Subject: Re: Finding the ip addresss of a computer?

Just type ipconfig in the command line and it will give you all the relevant info for your network.

On 3/6/2020 8:10 AM, Jessica D wrote:

Hi

Thanks, now it wants a domain/username, so how do I find that? 

Thanks, Jessica

On Mar 6, 2020, at 11:03 AM, Brian Vogel <britechguy@...> wrote:

I presume you're looking for the IP address on your local area network.  I find it much easier to do this on the machine where I want it by running the following command sequence under command prompt:

ipconfig | findstr IPv4

The IPv4 must be entered with the first two characters upper case, and the v in lower case, for this to work correctly.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

Hello,

The current manufacturer of the Romeo and Julilette braille embossers are handled by Humanware. They took over sales and servicing from Enabling Technology, Inc. over about 10 years ago.

They do have phone tech support and offices in the United States, based in New York. Go to their website for more information.

http://www.humanware.com/

HTH

What company produces the Juliett and Romeo Printers?  Are they still in business you think?  Thank you for this information.  Andy and Shubert

I have a Juliet that’s about 20 years old and I downloaded a copy of braille blaster software for it.  I bought a a serial to U.S.B. cable.  The only thing I still have to figure out are the margins.  Using that free software enabled me to not even both with the old version of Duxbury. 

When I have more time, I’ll play with the margins.  Just jsomething to consider.

Judy

                Hello, I want to find a used Braille Printer within reasonable price.   I would prefer interpoint but, not absolutely necessary.  Of course, a new printer would be nice, the cost is not.  Does anyone have a suggestion on a BRL printer tht won’t fall apart before my eyes?

I know where I can borrow one but, it is about 12-15 years old and is either parallel or seriel port.  I am looking around for a converter cable to USB and it is not recommended.  Not even sure if I can find the drivers.  Thanks for any help here.  Andy and Shubert

Andrew J. LaPointe, President

Friends of the Salem Council on Aging

34 Raymond Ave.

Salem, MA. 01970

Home: 978-745-4289 cell: 978-578-0185

Editor, Commission Commuter Update and the Safe Disabled Traveler Notebook

Talking Information Center

----- Original Message -----

From: Randy Barnett

To: main@jfw.groups.io

Sent: Friday, March 06, 2020 1:42 PM

Subject: Re: Finding the ip addresss of a computer?

Just type ipconfig in the command line and it will give you all the relevant info for your network.

On 3/6/2020 8:10 AM, Jessica D wrote:

Hi

Thanks, now it wants a domain/username, so how do I find that? 

Thanks, Jessica

On Mar 6, 2020, at 11:03 AM, Brian Vogel <britechguy@...> wrote:

I presume you're looking for the IP address on your local area network.  I find it much easier to do this on the machine where I want it by running the following command sequence under command prompt:

ipconfig | findstr IPv4

The IPv4 must be entered with the first two characters upper case, and the v in lower case, for this to work correctly.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

Hi

Thanks, now it wants a domain/username, so how do I find that? 

Thanks, Jessica

On Mar 6, 2020, at 11:03 AM, Brian Vogel <britechguy@...> wrote:

I presume you're looking for the IP address on your local area network.  I find it much easier to do this on the machine where I want it by running the following command sequence under command prompt:

ipconfig | findstr IPv4

The IPv4 must be entered with the first two characters upper case, and the v in lower case, for this to work correctly.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

anyone know where i can download classic shell? thanks for any help.

--
Dennis Cornelison

Okay, for some reason, today it is working fine.

Very strange.

~Ann


On Fri, Mar 6, 2020 at 01:46 PM, ann wrote:

Hi,

I have tried the F11 trick, in chrome Firefox and Internet Explorer,and it changed nothing. but, if I turn off the virtual cursor in Jaws, I can tab backand forth and Jaws reads the messages fine. But with the Virtual cursor on, Jaws doesn't see the messages at all.

Should I report this as a bug to someone, and exactly how do I go about doing this?

~Ann


On Fri, Mar 6, 2020 at 02:26 AM, Arkadiusz Świętnicki wrote:

David,

It behaves strangely and bounds of logic are not for it. I sometimes have the problem which OP provides.

 

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Diamond
Sent: Friday, March 6, 2020 7:44 AM
To: main@jfw.groups.io
Subject: Re: Facebook messenger no longer works with Jaws

 

Well, I have been using it with chrome a few minutes ago and have no problems.  Unless I am posting to a group, I have been using chrome for a long time to listen to messages and posts as well as sending messages via messenger. With no problems and yes, I’m using JAWS 2020.   

 

Hi,

I have tried the F11 trick, in chrome Firefox and Internet Explorer,and it changed nothing. but, if I turn off the virtual cursor in Jaws, I can tab backand forth and Jaws reads the messages fine. But with the Virtual cursor on, Jaws doesn't see the messages at all.

Should I report this as a bug to someone, and exactly how do I go about doing this?

~Ann


On Fri, Mar 6, 2020 at 02:26 AM, Arkadiusz Świętnicki wrote:

David,

It behaves strangely and bounds of logic are not for it. I sometimes have the problem which OP provides.

 

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Diamond
Sent: Friday, March 6, 2020 7:44 AM
To: main@jfw.groups.io
Subject: Re: Facebook messenger no longer works with Jaws

 

Well, I have been using it with chrome a few minutes ago and have no problems.  Unless I am posting to a group, I have been using chrome for a long time to listen to messages and posts as well as sending messages via messenger. With no problems and yes, I’m using JAWS 2020.   

 

Yep, I've rebooted twice,and tried three different browsers.

If I access my messages through the Facebook site, they read just fine. But
if I use the messenger web site, no messages are readable by Jaws.

~Ann

On Thu, Mar 5, 2020 at 10:58 PM, Chris Hill wrote:

I trust you have rebooted?  I just tried it using a portable version of
brave browser, which is a lot like Chrome.  It worked fine for me.

I won't use creepbook on a browser that I use for other things. I don't
want it following me around the web.



On 3/5/2020 20:56, ann wrote:

Hi,


The subject says it. I cannot read messages in Facebook messenger with
Jaws2020, latest version. I can see all relevant buttons and where
messages should be, but the messages will not read. This happens in
Chrome and Internet Explorer.


Does anyone have any fixes or work arounds?


~Ann

On Mar 6, 2020, at 1:31 PM, Arkadiusz Świętnicki <nuno69a@...> wrote:



If you are using the build-in Windows facilities, then the user name is your Windows username and the password is your Windows password

 

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Friday, March 6, 2020 6:54 PM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

 

Hi,

What do I need to do?

The command that someone gave for finding the username and password didn’t work.

 

Thanks,

 

Jessica

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Arkadiusz Swietnicki
Sent: Friday, March 6, 2020 11:41 AM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

 

@Jessica,bear in mind though that by using this method you will be able to use the computer remotely only through your local network! If you need the true remote experience you need further, more advanced configuration. I can help you with it if you so desire.

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Friday, March 6, 2020 5:10 PM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

 

Hi

Thanks, now it wants a domain/username, so how do I find that? 

 

Thanks, Jessica

 

 

On Mar 6, 2020, at 11:03 AM, Brian Vogel <britechguy@...> wrote:

I presume you're looking for the IP address on your local area network.  I find it much easier to do this on the machine where I want it by running the following command sequence under command prompt:

ipconfig | findstr IPv4

The IPv4 must be entered with the first two characters upper case, and the v in lower case, for this to work correctly.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

David,

It behaves strangely and bounds of logic are not for it. I sometimes have the problem which OP provides.

 

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Diamond
Sent: Friday, March 6, 2020 7:44 AM
To: main@jfw.groups.io
Subject: Re: Facebook messenger no longer works with Jaws

 

Well, I have been using it with chrome a few minutes ago and have no problems.  Unless I am posting to a group, I have been using chrome for a long time to listen to messages and posts as well as sending messages via messenger. With no problems and yes, I’m using JAWS 2020.   

 

Hi,

What do I need to do?

The command that someone gave for finding the username and password didn’t work.

Thanks,

Jessica

@Jessica,bear in mind though that by using this method you will be able to use the computer remotely only through your local network! If you need the true remote experience you need further, more advanced configuration. I can help you with it if you so desire.

Hi

----- Original Message -----

From: Jessica D

To: main@jfw.groups.io

Sent: Friday, March 06, 2020 11:54 AM

Subject: Re: Finding the ip addresss of a computer?

Hi,

What do I need to do?

The command that someone gave for finding the username and password didn’t work.

 

Thanks,

 

Jessica

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Arkadiusz Swietnicki
Sent: Friday, March 6, 2020 11:41 AM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

 

@Jessica,bear in mind though that by using this method you will be able to use the computer remotely only through your local network! If you need the true remote experience you need further, more advanced configuration. I can help you with it if you so desire.

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Friday, March 6, 2020 5:10 PM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

 

Hi

Thanks, now it wants a domain/username, so how do I find that? 

 

Thanks, Jessica

 

 

On Mar 6, 2020, at 11:03 AM, Brian Vogel <britechguy@...> wrote:

I presume you're looking for the IP address on your local area network.  I find it much easier to do this on the machine where I want it by running the following command sequence under command prompt:

ipconfig | findstr IPv4

The IPv4 must be entered with the first two characters upper case, and the v in lower case, for this to work correctly.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

@Jessica,bear in mind though that by using this method you will be able to use the computer remotely only through your local network! If you need the true remote experience you need further, more advanced configuration. I can help you with it if you so desire.

Hi

Hi