Date   
moderated Re: classic shell

Steve Matzura
 

Don't. It's flaky at best, and you should learn how to use the real one instead. More than just one man's opinion.


On 3/5/2020 11:13 AM, dennis wrote:

anyone know where i can download classic shell? thanks for any help.

--
Dennis Cornelison

moderated Re: Facebook messenger no longer works with Jaws

Randy Barnett
 

Don't you just hate it when this happens? I am glad it is working for you again.

On 3/6/2020 11:02 AM, ann wrote:
Okay, for some reason, today it is working fine.

Very strange.

~Ann


On Fri, Mar 6, 2020 at 01:46 PM, ann wrote:
Hi,

I have tried the F11 trick, in chrome Firefox and Internet Explorer,and it changed nothing. but, if I turn off the virtual cursor in Jaws, I can tab backand forth and Jaws reads the messages fine. But with the Virtual cursor on, Jaws doesn't see the messages at all.

Should I report this as a bug to someone, and exactly how do I go about doing this?

~Ann


On Fri, Mar 6, 2020 at 02:26 AM, Arkadiusz Świętnicki wrote:

David,

It behaves strangely and bounds of logic are not for it. I sometimes have the problem which OP provides.

 

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Diamond
Sent: Friday, March 6, 2020 7:44 AM
To: main@jfw.groups.io
Subject: Re: Facebook messenger no longer works with Jaws

 

Well, I have been using it with chrome a few minutes ago and have no problems.  Unless I am posting to a group, I have been using chrome for a long time to listen to messages and posts as well as sending messages via messenger. With no problems and yes, I’m using JAWS 2020.   

 

moderated Re: Facebook messenger no longer works with Jaws

ann
 

Okay, for some reason, today it is working fine.

Very strange.

~Ann


On Fri, Mar 6, 2020 at 01:46 PM, ann wrote:
Hi,

I have tried the F11 trick, in chrome Firefox and Internet Explorer,and it changed nothing. but, if I turn off the virtual cursor in Jaws, I can tab backand forth and Jaws reads the messages fine. But with the Virtual cursor on, Jaws doesn't see the messages at all.

Should I report this as a bug to someone, and exactly how do I go about doing this?

~Ann


On Fri, Mar 6, 2020 at 02:26 AM, Arkadiusz Świętnicki wrote:

David,

It behaves strangely and bounds of logic are not for it. I sometimes have the problem which OP provides.

 

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Diamond
Sent: Friday, March 6, 2020 7:44 AM
To: main@jfw.groups.io
Subject: Re: Facebook messenger no longer works with Jaws

 

Well, I have been using it with chrome a few minutes ago and have no problems.  Unless I am posting to a group, I have been using chrome for a long time to listen to messages and posts as well as sending messages via messenger. With no problems and yes, I’m using JAWS 2020.   

 

moderated Re: Facebook messenger no longer works with Jaws

Larry Ketchem
 

i was having problems with jaws 18 and firefox and i had to buy jaws
20 to get firefox to work again now jaws works fine with everything
<div id="DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2"><br />
<table style="border-top: 1px solid #D3D4DE;">
<tr>
<td style="width: 55px; padding-top: 13px;"><a
href="https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon"
target="_blank"><img
src="https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif"
alt="" width="46" height="29" style="width: 46px; height: 29px;"
/></a></td>
<td style="width: 470px; padding-top: 12px; color: #41424e;
font-size: 13px; font-family: Arial, Helvetica, sans-serif;
line-height: 18px;">Virus-free. <a
href="https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link"
target="_blank" style="color: #4453ea;">www.avast.com</a>
</td>
</tr>
</table><a href="#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2" width="1"
height="1"></a></div>

On 3/5/20, ann <@etheria> wrote:
Yep, I've rebooted twice,and tried three different browsers.

If I access my messages through the Facebook site, they read just fine. But
if I use the messenger web site, no messages are readable by Jaws.

~Ann

On Thu, Mar 5, 2020 at 10:58 PM, Chris Hill wrote:


I trust you have rebooted?  I just tried it using a portable version of
brave browser, which is a lot like Chrome.  It worked fine for me.

I won't use creepbook on a browser that I use for other things. I don't
want it following me around the web.



On 3/5/2020 20:56, ann wrote:

Hi,


The subject says it. I cannot read messages in Facebook messenger with
Jaws2020, latest version. I can see all relevant buttons and where
messages should be, but the messages will not read. This happens in
Chrome and Internet Explorer.


Does anyone have any fixes or work arounds?


~Ann





moderated Re: Finding the ip addresss of a computer?

Jessica D
 

Hi,
Here's a video I found, that may help. 


Thanks,
Jessica



On Mar 6, 2020, at 1:31 PM, Arkadiusz Świętnicki <nuno69a@...> wrote:



If you are using the build-in Windows facilities, then the user name is your Windows username and the password is your Windows password

 

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Friday, March 6, 2020 6:54 PM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

 

Hi,

What do I need to do?

The command that someone gave for finding the username and password didn’t work.

 

Thanks,

 

Jessica

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Arkadiusz Swietnicki
Sent: Friday, March 6, 2020 11:41 AM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

 

@Jessica,bear in mind though that by using this method you will be able to use the computer remotely only through your local network! If you need the true remote experience you need further, more advanced configuration. I can help you with it if you so desire.

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Friday, March 6, 2020 5:10 PM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

 

Hi

Thanks, now it wants a domain/username, so how do I find that? 

 

Thanks, Jessica

 

 

On Mar 6, 2020, at 11:03 AM, Brian Vogel <britechguy@...> wrote:

I presume you're looking for the IP address on your local area network.  I find it much easier to do this on the machine where I want it by running the following command sequence under command prompt:

ipconfig | findstr IPv4

The IPv4 must be entered with the first two characters upper case, and the v in lower case, for this to work correctly.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: Facebook messenger no longer works with Jaws

ann
 

Hi,

I have tried the F11 trick, in chrome Firefox and Internet Explorer,and it changed nothing. but, if I turn off the virtual cursor in Jaws, I can tab backand forth and Jaws reads the messages fine. But with the Virtual cursor on, Jaws doesn't see the messages at all.

Should I report this as a bug to someone, and exactly how do I go about doing this?

~Ann


On Fri, Mar 6, 2020 at 02:26 AM, Arkadiusz Świętnicki wrote:

David,

It behaves strangely and bounds of logic are not for it. I sometimes have the problem which OP provides.

 

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Diamond
Sent: Friday, March 6, 2020 7:44 AM
To: main@jfw.groups.io
Subject: Re: Facebook messenger no longer works with Jaws

 

Well, I have been using it with chrome a few minutes ago and have no problems.  Unless I am posting to a group, I have been using chrome for a long time to listen to messages and posts as well as sending messages via messenger. With no problems and yes, I’m using JAWS 2020.   

 

moderated Re: Finding the ip addresss of a computer?

Arkadiusz Świętnicki
 

If you are using the build-in Windows facilities, then the user name is your Windows username and the password is your Windows password

 

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Friday, March 6, 2020 6:54 PM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

 

Hi,

What do I need to do?

The command that someone gave for finding the username and password didn’t work.

 

Thanks,

 

Jessica

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Arkadiusz Swietnicki
Sent: Friday, March 6, 2020 11:41 AM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

 

@Jessica,bear in mind though that by using this method you will be able to use the computer remotely only through your local network! If you need the true remote experience you need further, more advanced configuration. I can help you with it if you so desire.

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Friday, March 6, 2020 5:10 PM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

 

Hi

Thanks, now it wants a domain/username, so how do I find that? 

 

Thanks, Jessica

 

 

On Mar 6, 2020, at 11:03 AM, Brian Vogel <britechguy@...> wrote:

I presume you're looking for the IP address on your local area network.  I find it much easier to do this on the machine where I want it by running the following command sequence under command prompt:

ipconfig | findstr IPv4

The IPv4 must be entered with the first two characters upper case, and the v in lower case, for this to work correctly.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: Finding the ip addresss of a computer?

Glenn / Lenny
 


There is no way you can get the password shown without third-party software.
Even windows can't show that.
All you can do is change the password with the third-party software, such as chntpw.
You may see the user and group by pressing alt + enter on "this PC" on the desktop.
Glenn

----- Original Message -----
From: Jessica D
Sent: Friday, March 06, 2020 11:54 AM
Subject: Re: Finding the ip addresss of a computer?

Hi,

What do I need to do?

The command that someone gave for finding the username and password didn’t work.

 

Thanks,

 

Jessica

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Arkadiusz Swietnicki
Sent: Friday, March 6, 2020 11:41 AM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

 

@Jessica,bear in mind though that by using this method you will be able to use the computer remotely only through your local network! If you need the true remote experience you need further, more advanced configuration. I can help you with it if you so desire.

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Friday, March 6, 2020 5:10 PM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

 

Hi

Thanks, now it wants a domain/username, so how do I find that? 

 

Thanks, Jessica

 

 

On Mar 6, 2020, at 11:03 AM, Brian Vogel <britechguy@...> wrote:

I presume you're looking for the IP address on your local area network.  I find it much easier to do this on the machine where I want it by running the following command sequence under command prompt:

ipconfig | findstr IPv4

The IPv4 must be entered with the first two characters upper case, and the v in lower case, for this to work correctly.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: Finding the ip addresss of a computer?

Jessica D
 

Hi,

What do I need to do?

The command that someone gave for finding the username and password didn’t work.

 

Thanks,

 

Jessica

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Arkadiusz Swietnicki
Sent: Friday, March 6, 2020 11:41 AM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

 

@Jessica,bear in mind though that by using this method you will be able to use the computer remotely only through your local network! If you need the true remote experience you need further, more advanced configuration. I can help you with it if you so desire.

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Friday, March 6, 2020 5:10 PM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

 

Hi

Thanks, now it wants a domain/username, so how do I find that? 

 

Thanks, Jessica

 

 

On Mar 6, 2020, at 11:03 AM, Brian Vogel <britechguy@...> wrote:

I presume you're looking for the IP address on your local area network.  I find it much easier to do this on the machine where I want it by running the following command sequence under command prompt:

ipconfig | findstr IPv4

The IPv4 must be entered with the first two characters upper case, and the v in lower case, for this to work correctly.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: Finding the ip addresss of a computer?

Arkadiusz Świętnicki
 

@Jessica,bear in mind though that by using this method you will be able to use the computer remotely only through your local network! If you need the true remote experience you need further, more advanced configuration. I can help you with it if you so desire.

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Friday, March 6, 2020 5:10 PM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

 

Hi

Thanks, now it wants a domain/username, so how do I find that? 

 

Thanks, Jessica

 



On Mar 6, 2020, at 11:03 AM, Brian Vogel <britechguy@...> wrote:

I presume you're looking for the IP address on your local area network.  I find it much easier to do this on the machine where I want it by running the following command sequence under command prompt:

ipconfig | findstr IPv4

The IPv4 must be entered with the first two characters upper case, and the v in lower case, for this to work correctly.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: Finding the ip addresss of a computer?

Mario
 

at a command prompt, type echo %userdomain% and press enter.

-------- Original Message --------
From: Jessica D [mailto:jldail13@...]
To: main@jfw.groups.io
Date: Friday, March 6, 2020, 11:10 AM
Subject: Finding the ip addresss of a computer?
Hi
Thanks, now it wants a domain/username, so how do I find that?

Thanks, Jessica



On Mar 6, 2020, at 11:03 AM, Brian Vogel <@britechguy> wrote:

I presume you're looking for the IP address on your local area
network.  I find it much easier to do this on the machine where I want
it by running the following command sequence under command prompt:

ipconfig | findstr IPv4

The IPv4 must be entered with the first two characters upper case, and
the v in lower case, for this to work correctly.

--

Brian *-*Windows 10 Pro, 64-Bit, Version 1909, Build 18363

*/Tolerance is the positive and cordial effort to understand another's
beliefs, practices, and habits without necessarily sharing or
accepting them./*

        ~ Joshua Liebman

moderated Localization of JFW

Arkadiusz Świętnicki
 

Hi list,

As I have told you in my first message, my first contact with JFW was about a year ago. Back then I had some problems of my own which prevented me from learning about the wsoftware. But as my knowledge increased drastically due to the community I wanted to give something back and localize JAWS to Polish, which is my native language. I know that there is already a polish version of JAWS, but I consider the translators’ policy to be immoral, if not even illegal, hence my willingness to translate JAWS from scratch and share the polish version on my own terms. Is there a way I can localize the whole program? I have found some *.JSM files but these seem to be only the script specific dialogues.

 

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

 

moderated Re: Creating website with JAWS

Richard Turner
 

The first step if you want to do it yourself, rather than depending on a program that uses pre-written templates is to learn HTML code at whatever level you wish.
NotePad will only be useful if you know the coding required.
There are tons of online tutorials to learn how to create websites.
I did it so long ago that I don't have specific ones in mind.
I think NotePad++ may have some templates, but someone else I'm sure will chime in.
Enjoy,



Richard
"There's a nap for that." 

Check out my web site at: www.turner42.com



On Mar 6, 2020, at 7:02 AM, Thabo Baseki <THAB0.BASEKI@...> wrote:


 Good day friends!

Thank you for adding me to the mailing list. This is my first post to the group, and I am excited, I can have my inquiries head. 

 I have never created a website before, and I want to learn how to do it. Where can I start? Is the place accessible with jars? Some people were telling me that I should use notepad, how is that effective?

Thank you for all the suggestions in advance!

Best regards



Thabo



JAWS certified-2020
http://www.freedomscientific.com/Services/TrainingAndCertification/Certification

moderated Re: Finding the ip addresss of a computer?

Jessica D
 

Hi
Thanks, now it wants a domain/username, so how do I find that? 

Thanks, Jessica



On Mar 6, 2020, at 11:03 AM, Brian Vogel <britechguy@...> wrote:

I presume you're looking for the IP address on your local area network.  I find it much easier to do this on the machine where I want it by running the following command sequence under command prompt:

ipconfig | findstr IPv4

The IPv4 must be entered with the first two characters upper case, and the v in lower case, for this to work correctly.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: Finding the ip addresss of a computer?

 

I presume you're looking for the IP address on your local area network.  I find it much easier to do this on the machine where I want it by running the following command sequence under command prompt:

ipconfig | findstr IPv4

The IPv4 must be entered with the first two characters upper case, and the v in lower case, for this to work correctly.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Finding the ip addresss of a computer?

Jessica D
 

Hi,

I have a computer that’s running windows 10 pro, with jaws 2020.

I’d like to be a able to access this computer remotely.

 

In order to do this, I need the IP Address.

To find it, I have to access a toolbar.

 

How would I go about doing that with jaws?

 

Thanks,

 

Jessica

 

moderated Creating website with JAWS

Thabo Baseki
 

 Good day friends!

Thank you for adding me to the mailing list. This is my first post to the group, and I am excited, I can have my inquiries head. 

 I have never created a website before, and I want to learn how to do it. Where can I start? Is the place accessible with jars? Some people were telling me that I should use notepad, how is that effective?

Thank you for all the suggestions in advance!

Best regards



Thabo



JAWS certified-2020
http://www.freedomscientific.com/Services/TrainingAndCertification/Certification

moderated Re: Braille Printers suggestion

Milton Ota
 

Hello,

The current manufacturer of the Romeo and Julilette braille embossers are handled by Humanware. They took over sales and servicing from Enabling Technology, Inc. over about 10 years ago.

 

They do have phone tech support and offices in the United States, based in New York. Go to their website for more information.

 

http://www.humanware.com/

 

HTH

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Andrew J. LaPointe
Sent: Friday, March 6, 2020 4:13 AM
To: main@jfw.groups.io
Subject: Re: Braille Printers suggestion

 

What company produces the Juliett and Romeo Printers?  Are they still in business you think?  Thank you for this information.  Andy and Shubert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Judy Redlich
Sent: Thursday, March 5, 2020 9:34 PM
To: main@jfw.groups.io
Subject: Re: Braille Printers suggestion

 

I have a Juliet that’s about 20 years old and I downloaded a copy of braille blaster software for it.  I bought a a serial to U.S.B. cable.  The only thing I still have to figure out are the margins.  Using that free software enabled me to not even both with the old version of Duxbury. 

When I have more time, I’ll play with the margins.  Just jsomething to consider.

Judy

    

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Andrew J. LaPointe
Sent: Thursday, March 05, 2020 4:08 PM
To: jfw@groups.io
Subject: Braille Printers suggestion

 

                Hello, I want to find a used Braille Printer within reasonable price.   I would prefer interpoint but, not absolutely necessary.  Of course, a new printer would be nice, the cost is not.  Does anyone have a suggestion on a BRL printer tht won’t fall apart before my eyes?

I know where I can borrow one but, it is about 12-15 years old and is either parallel or seriel port.  I am looking around for a converter cable to USB and it is not recommended.  Not even sure if I can find the drivers.  Thanks for any help here.  Andy and Shubert

 

Andrew J. LaPointe, President

Friends of the Salem Council on Aging

34 Raymond Ave.

Salem, MA. 01970

Home: 978-745-4289 cell: 978-578-0185

 

Editor, Commission Commuter Update and the Safe Disabled Traveler Notebook

Talking Information Center

 

moderated Re: JAWS performs a hit song thanks to inaccessible document! -unencrypt

Adam Kosakowski
 

Haha! Yeah, music these days do not have lyrics like they used to. But, what are you going to do?

moderated Re: Facebook messenger no longer works with Jaws

Chris Hill
 

If you mean messenger.com, it is working fine here.  Have you rebooted?



On 3/5/2020 23:14, ann wrote:
I am using the site on my Windows10 laptop with latest Jaws2020:
www.meseenger.com

~Ann


On Thu, Mar 5, 2020 at 10:32 PM, Sieghard Weitzel wrote:
How do you access Facebook Messenger? Are you using the app from the Microsoft Store or do you go to www.messenger.com?


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of ann
Sent: Thursday, March 5, 2020 6:56 PM
To: main@jfw.groups.io
Subject: Facebook messenger no longer works with Jaws

Hi,


The subject says it. I cannot read messages in Facebook messenger with Jaws2020, latest version. I can see all relevant buttons and where messages should be, but the messages will not read. This happens in Chrome and Internet Explorer.


Does anyone have any fixes or work arounds?


~Ann

 On Thu, Mar 5, 2020 at 10:32 PM, Sieghard Weitzel wrote:
How do you access Facebook Messenger? Are you using the app from the Microsoft Store or do you go to www.messenger.com?


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of ann
Sent: Thursday, March 5, 2020 6:56 PM
To: main@jfw.groups.io
Subject: Facebook messenger no longer works with Jaws

Hi,


The subject says it. I cannot read messages in Facebook messenger with Jaws2020, latest version. I can see all relevant buttons and where messages should be, but the messages will not read. This happens in Chrome and Internet Explorer.


Does anyone have any fixes or work arounds?


~Ann