Date   

moderated Re: : Com Pilot instructions

O.Addison Gethers
 

Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction
Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's
OCR feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I’m using jaws2019  with window10 desktop computer, this is
dbf file  when I press enter on the attachment  then I press insert +
spacebar  then letter o for OCR  then I press letter d for document
then I waited  jaws not reading anything yet !! What am I doing wrong in
here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY  11050

516-944-8900 x235, 516-393-7709  Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://protect2.fireeye.com/url?k=89c08575-d541b716-89c27c40-000babd9069e-
8ebbd6436b1fc22b&u=http://www.hknc.org/>

Office hours: 8:00 – 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments
may contain information that is privileged and or confidential and is
intended only for the individual or entity to which it is addressed. If
you are not the intended recipient, or agent responsible for delivering
this communication, you are hereby notified that any dissemination,
distribution, copying or disclosure of this communication is strictly
prohibited. If you have received this transmission in error, please
notify the sender immediately, and delete the original communication and
any attachment from any computer, server or other electronic recording
or storage device. Receipt by anyone other than the intended recipient
is not a waiver of any privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got
me that I receive from you today (Thursday) ? Also  please tell me what
you showed me the button on icon again by power switch  I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison


moderated Re: Need step by instructions for setting up and useing remote jaws for work.

Abraham Sweiss
 

I do not think this is a valid option.
Do not think Josh and NVDA can run at the same time.
And if speech for NVDA is turned off, then do user will not receive any feedback from the remote workstation.

Thanks,abraham

On Feb 28, 2020, at 1:57 PM, Glenn / Lenny <glennervin@...> wrote:

If cost is an issue, perhaps you could use NVDA remote and use it with
speech off, while using Jaws.
There could be a few keystroke conflicts, but that could be fixed.

Glenn

----- Original Message -----
From: "Mario" <mrb620@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 10:16 AM
Subject: Re: Need step by instructions for setting up and useing remote jaws
for work.


if you're asking about the Remote Desktop built in to Windows, that's a
different beast as opposed to JAWS Tandem. sorry I don't know but I
assume that it would be a different keystroke.

-------- Original Message --------
From: Shannon [mailto:shannon@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 10:56 AM
Subject: Need step by instructions for setting up and useing remote jaws
for work.
Ok, Thank yu for that but I need the Remote desktop control.
Is it different.
I need to get the laptop to remote into the desktop at work. Both on
different internet connections so I can access the programs that run on
my work desktop from home.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 8:39 AM
To: main@jfw.groups.io
Subject: Re: Need step by instructions for setting up and useing remote
jaws for work.

for the regular Tandem, it is insert+alt+tab key which:
Toggles between the JAWS Tandem Controller window and the controller’s
local computer.
Available only on the controler system, this keystroke suspends or
resumes a JAWS Tandem session in order to toggle between the target
system’s desktop and the controller system’s desktop.


-------- Original Message --------
From: Glenn / Lenny [mailto:glennervin@...]
To: <main@jfw.groups.io>
Date: Thursday, February 27, 2020, 8:31 PM
Subject: Need step by instructions for setting up and useing remote jaws
for work.
Once you have taken control of a computer, it is just like being on the
other computer.
There is a keyboard shortcut to toggle back and forth with Jaws Tandem as
well, but I don't recall what it is.
Glenn

----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 7:24 PM
Subject: Re: Need step by instructions for setting up and useing remote
jaws
for work.


Ok, thanks again Glen.
I’ll take the laptop tomorrow and look at that setting. Are commands to use
the remote copy of jaws the normal commands?
On Feb 27, 2020, at 7:05 PM, Glenn / Lenny <glennervin@...>
wrote:


Hi Shannon,
I think it is the Tandem Direct in utilities.
The menu says
Tandem Direct submenu
And down arrow there.
I have done tandem regular to help folks quite a few times before, but I
have not tried Tandem direct.
I noticed that get access to a computer is not available on mine for some
reason.
But at any rate, I think you will need to initiate the connection from work
first.
HTH.
Glenn
----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 6:58 PM
Subject: Re: Need step by instructions for setting up and useing remote
jaws
for work.


Hello Glenn, and thanks for the reminder. Both copies are the same year.
Version number I mean. But I would want to copy at my work profile
settings.
I didn’t think of that.
That part I think I know how to do. Import new settings for my back up. How
do I use remote control? Do you know?
On Feb 27, 2020, at 6:49 PM, Glenn / Lenny <glennervin@...>
wrote:


Hi,
If you have exported your settings to a jaws settings file, you can eMail
the file to your work, or bring it on a thumb drive and import it into the
other Jaws.
Unless the Jaws at work is older than the Jaws you are currently using.
Glenn
----- Original Message ----- From: "Shannon" <shannon@...>
To: <jfw@groups.io>
Sent: Thursday, February 27, 2020 6:46 PM
Subject: Need step by instructions for setting up and useing remote jaws
for
work.




















.








.








moderated Re: Need step by instructions for setting up and useing remote jaws for work.

Glenn / Lenny
 

If cost is an issue, perhaps you could use NVDA remote and use it with
speech off, while using Jaws.
There could be a few keystroke conflicts, but that could be fixed.

Glenn

----- Original Message -----
From: "Mario" <mrb620@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 10:16 AM
Subject: Re: Need step by instructions for setting up and useing remote jaws
for work.


if you're asking about the Remote Desktop built in to Windows, that's a
different beast as opposed to JAWS Tandem. sorry I don't know but I
assume that it would be a different keystroke.

-------- Original Message --------
From: Shannon [mailto:shannon@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 10:56 AM
Subject: Need step by instructions for setting up and useing remote jaws
for work.
Ok, Thank yu for that but I need the Remote desktop control.
Is it different.
I need to get the laptop to remote into the desktop at work. Both on
different internet connections so I can access the programs that run on
my work desktop from home.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 8:39 AM
To: main@jfw.groups.io
Subject: Re: Need step by instructions for setting up and useing remote
jaws for work.

for the regular Tandem, it is insert+alt+tab key which:
Toggles between the JAWS Tandem Controller window and the controller’s
local computer.
Available only on the controler system, this keystroke suspends or
resumes a JAWS Tandem session in order to toggle between the target
system’s desktop and the controller system’s desktop.


-------- Original Message --------
From: Glenn / Lenny [mailto:glennervin@...]
To: <main@jfw.groups.io>
Date: Thursday, February 27, 2020, 8:31 PM
Subject: Need step by instructions for setting up and useing remote jaws
for work.
Once you have taken control of a computer, it is just like being on the
other computer.
There is a keyboard shortcut to toggle back and forth with Jaws Tandem as
well, but I don't recall what it is.
Glenn

----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 7:24 PM
Subject: Re: Need step by instructions for setting up and useing remote
jaws
for work.


Ok, thanks again Glen.
I’ll take the laptop tomorrow and look at that setting. Are commands to use
the remote copy of jaws the normal commands?
On Feb 27, 2020, at 7:05 PM, Glenn / Lenny <glennervin@...>
wrote:


Hi Shannon,
I think it is the Tandem Direct in utilities.
The menu says
Tandem Direct submenu
And down arrow there.
I have done tandem regular to help folks quite a few times before, but I
have not tried Tandem direct.
I noticed that get access to a computer is not available on mine for some
reason.
But at any rate, I think you will need to initiate the connection from work
first.
HTH.
Glenn
----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 6:58 PM
Subject: Re: Need step by instructions for setting up and useing remote
jaws
for work.


Hello Glenn, and thanks for the reminder. Both copies are the same year.
Version number I mean. But I would want to copy at my work profile
settings.
I didn’t think of that.
That part I think I know how to do. Import new settings for my back up. How
do I use remote control? Do you know?
On Feb 27, 2020, at 6:49 PM, Glenn / Lenny <glennervin@...>
wrote:


Hi,
If you have exported your settings to a jaws settings file, you can eMail
the file to your work, or bring it on a thumb drive and import it into the
other Jaws.
Unless the Jaws at work is older than the Jaws you are currently using.
Glenn
----- Original Message ----- From: "Shannon" <shannon@...>
To: <jfw@groups.io>
Sent: Thursday, February 27, 2020 6:46 PM
Subject: Need step by instructions for setting up and useing remote jaws
for
work.




















.








.


moderated Re: does jfw work very well with firefox?

Glenn / Lenny
 

Works fine.
 

----- Original Message -----
Sent: Thursday, February 27, 2020 6:34 PM
Subject: does jfw work very well with firefox?

 
Hello,
 
I am still using Jfw 18, can someone maybe please let me know if jfw works very well or maybe not with firefox? Do I maybe need to install jfw scripts before I am able to use jfw with firefox? Thanks in advance for any help I can get with this.
 
 
 
 
 
 
 
All the best,
 
Hank
 
 
 
 


moderated Re: does jfw work very well with firefox?

JM Casey
 

JAWS 2018 does work with Firefox 70, but JAWS 18, of course, won’t, as you implied.

 

Lynx..wow,. Those were oddly my favouite internet browsing days, over the old telnet and linux shell. Haha

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cohn, Jonathan
Sent: February 28, 2020 11:52 AM
To: main@jfw.groups.io
Subject: Re: does jfw work very well with firefox?

 

Well, JAWS works well  the version of Firefox that came out about the same time as the version of JAWS. Don't expect JAWS 2018 to work with Firefox 70. There were major changes to Firefox in around version 57, and JAWS and NVDA  had to  completely change the way they worked with the browser when that occurred. So if you are unable to upgrade past JAWS 18 then I suggest you don't try working with modern Browsers. And if you don't work with modern browsers then you might find parts of the web unusable . Though there is a new version of Lynx that recently came out.


moderated Re: Dectalk software speech or its successor?

Ari Damoulakis
 

A synthesizer I wish still existed was the DoubleTalk.
Even now, it is still my favourite reading voice, and I could listen
to it for hours. I don't know if that's just me and nostalgia, but I
miss that voice, and I'd use it instead of anything modern if I could.
Ari

On 2/28/20, Mario <mrb620@...> wrote:
oh, I forgot to mention that there was a serial number that needed to be
entered to register the use of the voices. so it's not a simple MSI that
once run will install the necessary components.


-------- Original Message --------
From: Mario [mailto:mrb620@...]
To: main@jfw.groups.io
Date: Friday, February 28, 2020, 12:04 PM
Subject: Dectalk software speech or its successor?
I recall almost everybody that got the DECTalk32 software complained
that it sounded terrible as it did not sound as clear as expected. there
were alot of pops, scratches, and other anomalies.

I recall her name was Corine Bickley and the software was intended for
NVDA, but that was five years ago.

-------- Original Message --------
From: Ari Damoulakis [mailto:aridamoulakis@...]
To: main@jfw.groups.io
Date: Friday, February 28, 2020, 11:43 AM
Subject: Dectalk software speech or its successor?
I had the DekTalk32 software, and I seem to remember that I just had
to email a place and they let me download it totally free.
The only problem is that I can't find the file that I downloaded to be
able to somehow send it to you, since I realized I didn't really like
the speech much, I didn't keep the file.
Is it true though that, with a Roku, I heard Audio Guide is only
available to devices registered in the US?
We don't live there, my brother bought a Roku, but when we tried to
find the option to enable AG to see what it does, he said there wasn't
such an option?
Then, when I looked on the internet, I seem to have read somewhere
only US Rokus have the option to enable the screenreader?
Thanks
Ari

On 2/24/20, Glenn / Lenny <glennervin@...> wrote:
Hi,
That sounds like a canned message that comes up for any software that was
written for older operating systems.
If you want to feel comfortable about whether it has any viruses, just
arrow

to the folder and use the applications key and enter on the option to scan
with defender, it won't take but half a minute on such a small folder.
But it has no malware or viruses.
The only question is how it may work on windows 10.
You may have to go into the properties after it's installed to run it in XP

mode.
Glenn
----- Original Message -----
From: "Jessica D" <jldail13@...>
To: <main@jfw.groups.io>
Sent: Monday, February 24, 2020 12:24 PM
Subject: Re: Dectalk software speech or its successor?


Hi,
I just tried to install it, but it failed.
Windows dfender told me it may harm my pc, and blocked it at first.
Is that normal?

Thanks,

Jessica


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: Friday, February 21, 2020 9:04 PM
To: main@jfw.groups.io
Subject: Re: Dectalk software speech or its successor?

You could try this:
https://od.lk/d/N18xNzUzNDUzMjdf/DECTalk.zip
That is for the driver that can be installed into Windows, I think it is
the

Software version, not for the hardware synth.

----- Original Message -----
From: "Chris Hill" <hillco@...>
To: <main@jfw.groups.io>
Sent: Friday, February 21, 2020 7:58 PM
Subject: Re: Dectalk software speech or its successor?


Thanks, I'll check into that.


CH


On 2/21/2020 11:30, Bill Tillery wrote:
You can attempt to contact thiws group since they are the last that I
know of to have the software.

Access Solutions Inc.
E-Mail: support@...
Phone: (916) 481-3559

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Steve
Nutt
Sent: Friday, February 21, 2020 10:43 AM
To: main@jfw.groups.io
Subject: Re: Dectalk software speech or its successor?

I don't think it's available any more.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Randy Barnett
Sent: 20 February 2020 03:59
To: main@jfw.groups.io
Subject: Re: Dectalk software speech or its successor?

Search for dectalk access32-

One site i found:

http://mcspartners.ning.com/profiles/blogs/dectalk-access32-v4-6-speech-engine-crack






On 2/19/2020 7:43 PM, Chris Hill wrote:
Does anyone know of speech that sounds like that available for use
with Jaws? I find a company when I search, but I don't find much on
how it works. I'd probably even pay a bit of money to get that voice
again if it was available.


































.





.





moderated Re: : Com Pilot instructions

Mario
 

a dbf file is a database file. I don't think it will work with JAWS's OCR feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I’m using jaws2019  with window10 desktop computer, this is
dbf file  when I press enter on the attachment  then I press insert +
spacebar  then letter o for OCR  then I press letter d for document
then I waited  jaws not reading anything yet !! What am I doing wrong in
here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY  11050

516-944-8900 x235, 516-393-7709  Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://protect2.fireeye.com/url?k=89c08575-d541b716-89c27c40-000babd9069e-8ebbd6436b1fc22b&u=http://www.hknc.org/>

Office hours: 8:00 – 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments
may contain information that is privileged and or confidential and is
intended only for the individual or entity to which it is addressed. If
you are not the intended recipient, or agent responsible for delivering
this communication, you are hereby notified that any dissemination,
distribution, copying or disclosure of this communication is strictly
prohibited. If you have received this transmission in error, please
notify the sender immediately, and delete the original communication and
any attachment from any computer, server or other electronic recording
or storage device. Receipt by anyone other than the intended recipient
is not a waiver of any privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got
me that I receive from you today (Thursday) ? Also  please tell me what
you showed me the button on icon again by power switch  I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison


moderated : Com Pilot instructions

O.Addison Gethers
 

Hello All I’m using jaws2019  with window10 desktop computer, this is dbf file  when I press enter on the attachment  then I press insert + spacebar  then letter o for OCR  then I press letter d for document  then I waited  jaws not reading anything yet !! What am I doing wrong in here?

Addison

 

From: Carol Hamer [mailto:carol.hamer@...]
Sent: Friday, February 21, 2020 2:59 PM
To: O.AddisonGethers@...
Subject: Com Pilot instructions

 

 

 

Carol Hamer, MA, F-AAA

Audiologist

141 Middle Neck Road

Sands Point, NY  11050

516-944-8900 x235, 516-393-7709  Fax: 516-944-7302

carol.hamer@...

www.hknc.org

Office hours: 8:00 – 3:45 on Monday, Wednesday, Thursday and Friday

 

The information contained in this email transmission and any attachments may contain information that is privileged and or confidential and is intended only for the individual or entity to which it is addressed. If you are not the intended recipient, or agent responsible for delivering this communication, you are hereby notified that any dissemination, distribution, copying or disclosure of this communication is strictly prohibited. If you have received this transmission in error, please notify the sender immediately, and delete the original communication and any attachment from any computer, server or other electronic recording or storage device. Receipt by anyone other than the intended recipient is not a waiver of any privilege.

 

 

 

 

 

From: Addison Gethers [mailto:o.addisongethers@...]
Sent: Thursday, February 13, 2020 9:11 PM
To: 'Strange, Christine' <strangcc@...>
Subject: Hi Christine New copilot icon

 

Hi Christine 

Will you please give me the instruction for the new copilot icon you got me that I receive from you today (Thursday) ? Also  please tell me what you showed me the button on icon again by power switch  I know there is 2 button on top and what is the other 2 button for ? Is it to max and minimum the volume ?

Addison


moderated Re: Dectalk software speech or its successor?

Mario
 

oh, I forgot to mention that there was a serial number that needed to be entered to register the use of the voices. so it's not a simple MSI that once run will install the necessary components.

-------- Original Message --------
From: Mario [mailto:mrb620@...]
To: main@jfw.groups.io
Date: Friday, February 28, 2020, 12:04 PM
Subject: Dectalk software speech or its successor?
I recall almost everybody that got the DECTalk32 software complained
that it sounded terrible as it did not sound as clear as expected. there
were alot of pops, scratches, and other anomalies.

I recall her name was Corine Bickley and the software was intended for
NVDA, but that was five years ago.

-------- Original Message --------
From: Ari Damoulakis [mailto:aridamoulakis@...]
To: main@jfw.groups.io
Date: Friday, February 28, 2020, 11:43 AM
Subject: Dectalk software speech or its successor?
I had the DekTalk32 software, and I seem to remember that I just had
to email a place and they let me download it totally free.
The only problem is that I can't find the file that I downloaded to be
able to somehow send it to you, since I realized I didn't really like
the speech much, I didn't keep the file.
  Is it true though that, with a Roku, I heard Audio Guide is only
available to devices registered in the US?
We don't live there, my brother bought a Roku, but when we tried to
find the option to enable AG to see what it does, he said there wasn't
such an option?
Then, when I looked on the internet, I seem to have read somewhere
only US Rokus have the option to enable the screenreader?
Thanks
Ari

On 2/24/20, Glenn / Lenny <glennervin@...> wrote:
Hi,
That sounds like a canned message that comes up for any software that was
written for older operating systems.
If you want to feel comfortable about whether it has any viruses, just
arrow

to the folder and use the applications key and enter on the option to scan
with defender, it won't take but half a minute on such a small folder.
But it has no malware or viruses.
The only question is how it may work on windows 10.
You may have to go into the properties after it's installed to run it in XP

mode.
Glenn
----- Original Message -----
From: "Jessica D" <jldail13@...>
To: <main@jfw.groups.io>
Sent: Monday, February 24, 2020 12:24 PM
Subject: Re: Dectalk software speech or its successor?


Hi,
I just tried to install it, but it failed.
Windows dfender told me it may harm my pc, and blocked it at first.
Is that normal?

Thanks,

Jessica


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: Friday, February 21, 2020 9:04 PM
To: main@jfw.groups.io
Subject: Re: Dectalk software speech or its successor?

You could try this:
https://od.lk/d/N18xNzUzNDUzMjdf/DECTalk.zip
That is for the driver that can be installed into Windows, I think it is
the

Software version, not for the hardware synth.

----- Original Message -----
From: "Chris Hill" <hillco@...>
To: <main@jfw.groups.io>
Sent: Friday, February 21, 2020 7:58 PM
Subject: Re: Dectalk software speech or its successor?


Thanks, I'll check into that.


CH


On 2/21/2020 11:30, Bill Tillery wrote:
You can attempt to contact thiws group since they are the last that I
know of to have the software.

Access Solutions Inc.
E-Mail: support@...
Phone: (916) 481-3559

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Steve
Nutt
Sent: Friday, February 21, 2020 10:43 AM
To: main@jfw.groups.io
Subject: Re: Dectalk software speech or its successor?

I don't think it's available any more.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Randy Barnett
Sent: 20 February 2020 03:59
To: main@jfw.groups.io
Subject: Re: Dectalk software speech or its successor?

Search for dectalk access32-

One site i found:

http://mcspartners.ning.com/profiles/blogs/dectalk-access32-v4-6-speech-engine-crack





On 2/19/2020 7:43 PM, Chris Hill wrote:
Does anyone know of speech that sounds like that available for use
with Jaws?  I find a company when I search, but I don't find much on
how it works.  I'd probably even pay a bit of money to get that voice
again if it was available.


































.





.


moderated Re: Dectalk software speech or its successor?

Mario
 

I recall almost everybody that got the DECTalk32 software complained that it sounded terrible as it did not sound as clear as expected. there were alot of pops, scratches, and other anomalies.

I recall her name was Corine Bickley and the software was intended for NVDA, but that was five years ago.

-------- Original Message --------
From: Ari Damoulakis [mailto:aridamoulakis@...]
To: main@jfw.groups.io
Date: Friday, February 28, 2020, 11:43 AM
Subject: Dectalk software speech or its successor?
I had the DekTalk32 software, and I seem to remember that I just had
to email a place and they let me download it totally free.
The only problem is that I can't find the file that I downloaded to be
able to somehow send it to you, since I realized I didn't really like
the speech much, I didn't keep the file.
Is it true though that, with a Roku, I heard Audio Guide is only
available to devices registered in the US?
We don't live there, my brother bought a Roku, but when we tried to
find the option to enable AG to see what it does, he said there wasn't
such an option?
Then, when I looked on the internet, I seem to have read somewhere
only US Rokus have the option to enable the screenreader?
Thanks
Ari

On 2/24/20, Glenn / Lenny <glennervin@...> wrote:
Hi,
That sounds like a canned message that comes up for any software that was
written for older operating systems.
If you want to feel comfortable about whether it has any viruses, just arrow

to the folder and use the applications key and enter on the option to scan
with defender, it won't take but half a minute on such a small folder.
But it has no malware or viruses.
The only question is how it may work on windows 10.
You may have to go into the properties after it's installed to run it in XP

mode.
Glenn
----- Original Message -----
From: "Jessica D" <jldail13@...>
To: <main@jfw.groups.io>
Sent: Monday, February 24, 2020 12:24 PM
Subject: Re: Dectalk software speech or its successor?


Hi,
I just tried to install it, but it failed.
Windows dfender told me it may harm my pc, and blocked it at first.
Is that normal?

Thanks,

Jessica


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: Friday, February 21, 2020 9:04 PM
To: main@jfw.groups.io
Subject: Re: Dectalk software speech or its successor?

You could try this:
https://od.lk/d/N18xNzUzNDUzMjdf/DECTalk.zip
That is for the driver that can be installed into Windows, I think it is the

Software version, not for the hardware synth.

----- Original Message -----
From: "Chris Hill" <hillco@...>
To: <main@jfw.groups.io>
Sent: Friday, February 21, 2020 7:58 PM
Subject: Re: Dectalk software speech or its successor?


Thanks, I'll check into that.


CH


On 2/21/2020 11:30, Bill Tillery wrote:
You can attempt to contact thiws group since they are the last that I
know of to have the software.

Access Solutions Inc.
E-Mail: support@...
Phone: (916) 481-3559

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Steve
Nutt
Sent: Friday, February 21, 2020 10:43 AM
To: main@jfw.groups.io
Subject: Re: Dectalk software speech or its successor?

I don't think it's available any more.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Randy Barnett
Sent: 20 February 2020 03:59
To: main@jfw.groups.io
Subject: Re: Dectalk software speech or its successor?

Search for dectalk access32-

One site i found:

http://mcspartners.ning.com/profiles/blogs/dectalk-access32-v4-6-speech-engine-crack



On 2/19/2020 7:43 PM, Chris Hill wrote:
Does anyone know of speech that sounds like that available for use
with Jaws? I find a company when I search, but I don't find much on
how it works. I'd probably even pay a bit of money to get that voice
again if it was available.


































.


moderated Re: does jfw work very well with firefox?

Cohn, Jonathan
 

Well, JAWS works well  the version of Firefox that came out about the same time as the version of JAWS. Don't expect JAWS 2018 to work with Firefox 70. There were major changes to Firefox in around version 57, and JAWS and NVDA  had to  completely change the way they worked with the browser when that occurred. So if you are unable to upgrade past JAWS 18 then I suggest you don't try working with modern Browsers. And if you don't work with modern browsers then you might find parts of the web unusable . Though there is a new version of Lynx that recently came out.


moderated Re: Dectalk software speech or its successor?

Ari Damoulakis
 

I had the DekTalk32 software, and I seem to remember that I just had
to email a place and they let me download it totally free.
The only problem is that I can't find the file that I downloaded to be
able to somehow send it to you, since I realized I didn't really like
the speech much, I didn't keep the file.
Is it true though that, with a Roku, I heard Audio Guide is only
available to devices registered in the US?
We don't live there, my brother bought a Roku, but when we tried to
find the option to enable AG to see what it does, he said there wasn't
such an option?
Then, when I looked on the internet, I seem to have read somewhere
only US Rokus have the option to enable the screenreader?
Thanks
Ari

On 2/24/20, Glenn / Lenny <glennervin@...> wrote:
Hi,
That sounds like a canned message that comes up for any software that was
written for older operating systems.
If you want to feel comfortable about whether it has any viruses, just arrow

to the folder and use the applications key and enter on the option to scan
with defender, it won't take but half a minute on such a small folder.
But it has no malware or viruses.
The only question is how it may work on windows 10.
You may have to go into the properties after it's installed to run it in XP

mode.
Glenn
----- Original Message -----
From: "Jessica D" <jldail13@...>
To: <main@jfw.groups.io>
Sent: Monday, February 24, 2020 12:24 PM
Subject: Re: Dectalk software speech or its successor?


Hi,
I just tried to install it, but it failed.
Windows dfender told me it may harm my pc, and blocked it at first.
Is that normal?

Thanks,

Jessica


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: Friday, February 21, 2020 9:04 PM
To: main@jfw.groups.io
Subject: Re: Dectalk software speech or its successor?

You could try this:
https://od.lk/d/N18xNzUzNDUzMjdf/DECTalk.zip
That is for the driver that can be installed into Windows, I think it is the

Software version, not for the hardware synth.

----- Original Message -----
From: "Chris Hill" <hillco@...>
To: <main@jfw.groups.io>
Sent: Friday, February 21, 2020 7:58 PM
Subject: Re: Dectalk software speech or its successor?


Thanks, I'll check into that.


CH


On 2/21/2020 11:30, Bill Tillery wrote:
You can attempt to contact thiws group since they are the last that I
know of to have the software.

Access Solutions Inc.
E-Mail: support@...
Phone: (916) 481-3559

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Steve
Nutt
Sent: Friday, February 21, 2020 10:43 AM
To: main@jfw.groups.io
Subject: Re: Dectalk software speech or its successor?

I don't think it's available any more.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Randy Barnett
Sent: 20 February 2020 03:59
To: main@jfw.groups.io
Subject: Re: Dectalk software speech or its successor?

Search for dectalk access32-

One site i found:

http://mcspartners.ning.com/profiles/blogs/dectalk-access32-v4-6-speech-engine-crack



On 2/19/2020 7:43 PM, Chris Hill wrote:
Does anyone know of speech that sounds like that available for use
with Jaws? I find a company when I search, but I don't find much on
how it works. I'd probably even pay a bit of money to get that voice
again if it was available.

























moderated Re: Need step by instructions for setting up and useing remote jaws for work.

Abraham Sweiss
 

That is what are use jaws remote desktop for. I log into remote systems at work.

One. You need to purchase the jaws remote desktop license for that function to work.
Two. Jaws needs to be installed on the remote computers.
Three. You will either use Microsoft RDP or Citrix VDI to access the remote computers from your work

Thanks,abraham

On Feb 28, 2020, at 10:56 AM, Shannon <shannon@...> wrote:

Ok, Thank yu for that but I need the Remote desktop control.
Is it different.
I need to get the laptop to remote into the desktop at work. Both on different internet connections so I can access the programs that run on my work desktop from home.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 8:39 AM
To: main@jfw.groups.io
Subject: Re: Need step by instructions for setting up and useing remote jaws for work.

for the regular Tandem, it is insert+alt+tab key which:
Toggles between the JAWS Tandem Controller window and the controller’s
local computer.
Available only on the controler system, this keystroke suspends or
resumes a JAWS Tandem session in order to toggle between the target
system’s desktop and the controller system’s desktop.


-------- Original Message --------
From: Glenn / Lenny [mailto:glennervin@...]
To: <main@jfw.groups.io>
Date: Thursday, February 27, 2020, 8:31 PM
Subject: Need step by instructions for setting up and useing remote jaws
for work.
Once you have taken control of a computer, it is just like being on the
other computer.
There is a keyboard shortcut to toggle back and forth with Jaws Tandem as
well, but I don't recall what it is.
Glenn

----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 7:24 PM
Subject: Re: Need step by instructions for setting up and useing remote
jaws
for work.


Ok, thanks again Glen.
I’ll take the laptop tomorrow and look at that setting. Are commands to use
the remote copy of jaws the normal commands?
On Feb 27, 2020, at 7:05 PM, Glenn / Lenny <glennervin@...>
wrote:


Hi Shannon,
I think it is the Tandem Direct in utilities.
The menu says
Tandem Direct submenu
And down arrow there.
I have done tandem regular to help folks quite a few times before, but I
have not tried Tandem direct.
I noticed that get access to a computer is not available on mine for some
reason.
But at any rate, I think you will need to initiate the connection from work
first.
HTH.
Glenn
----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 6:58 PM
Subject: Re: Need step by instructions for setting up and useing remote
jaws
for work.


Hello Glenn, and thanks for the reminder. Both copies are the same year.
Version number I mean. But I would want to copy at my work profile
settings.
I didn’t think of that.
That part I think I know how to do. Import new settings for my back up. How
do I use remote control? Do you know?
On Feb 27, 2020, at 6:49 PM, Glenn / Lenny <glennervin@...>
wrote:


Hi,
If you have exported your settings to a jaws settings file, you can eMail
the file to your work, or bring it on a thumb drive and import it into the
other Jaws.
Unless the Jaws at work is older than the Jaws you are currently using.
Glenn
----- Original Message ----- From: "Shannon" <shannon@...>
To: <jfw@groups.io>
Sent: Thursday, February 27, 2020 6:46 PM
Subject: Need step by instructions for setting up and useing remote jaws
for
work.




















.








moderated Re: Need step by instructions for setting up and useing remote jaws for work.

Mario
 

if you're asking about the Remote Desktop built in to Windows, that's a different beast as opposed to JAWS Tandem. sorry I don't know but I assume that it would be a different keystroke.

-------- Original Message --------
From: Shannon [mailto:shannon@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 10:56 AM
Subject: Need step by instructions for setting up and useing remote jaws for work.
Ok, Thank yu for that but I need the Remote desktop control.
Is it different.
I need to get the laptop to remote into the desktop at work. Both on different internet connections so I can access the programs that run on my work desktop from home.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 8:39 AM
To: main@jfw.groups.io
Subject: Re: Need step by instructions for setting up and useing remote jaws for work.

for the regular Tandem, it is insert+alt+tab key which:
Toggles between the JAWS Tandem Controller window and the controller’s
local computer.
Available only on the controler system, this keystroke suspends or
resumes a JAWS Tandem session in order to toggle between the target
system’s desktop and the controller system’s desktop.


-------- Original Message --------
From: Glenn / Lenny [mailto:glennervin@...]
To: <main@jfw.groups.io>
Date: Thursday, February 27, 2020, 8:31 PM
Subject: Need step by instructions for setting up and useing remote jaws
for work.
Once you have taken control of a computer, it is just like being on the
other computer.
There is a keyboard shortcut to toggle back and forth with Jaws Tandem as
well, but I don't recall what it is.
Glenn

----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 7:24 PM
Subject: Re: Need step by instructions for setting up and useing remote
jaws
for work.


Ok, thanks again Glen.
I’ll take the laptop tomorrow and look at that setting. Are commands to use
the remote copy of jaws the normal commands?
On Feb 27, 2020, at 7:05 PM, Glenn / Lenny <glennervin@...>
wrote:


Hi Shannon,
I think it is the Tandem Direct in utilities.
The menu says
Tandem Direct submenu
And down arrow there.
I have done tandem regular to help folks quite a few times before, but I
have not tried Tandem direct.
I noticed that get access to a computer is not available on mine for some
reason.
But at any rate, I think you will need to initiate the connection from work
first.
HTH.
Glenn
----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 6:58 PM
Subject: Re: Need step by instructions for setting up and useing remote
jaws
for work.


Hello Glenn, and thanks for the reminder. Both copies are the same year.
Version number I mean. But I would want to copy at my work profile
settings.
I didn’t think of that.
That part I think I know how to do. Import new settings for my back up. How
do I use remote control? Do you know?
On Feb 27, 2020, at 6:49 PM, Glenn / Lenny <glennervin@...>
wrote:


Hi,
If you have exported your settings to a jaws settings file, you can eMail
the file to your work, or bring it on a thumb drive and import it into the
other Jaws.
Unless the Jaws at work is older than the Jaws you are currently using.
Glenn
----- Original Message ----- From: "Shannon" <shannon@...>
To: <jfw@groups.io>
Sent: Thursday, February 27, 2020 6:46 PM
Subject: Need step by instructions for setting up and useing remote jaws
for
work.




















.








.


moderated Re: Need step by instructions for setting up and useing remote jaws for work.

Michael Mote
 

Hi there. If I could drop in on this thread. Remote JAWS is different than using JAWS Tandem. First of all, you must purchase the remote license add-on from Freedom Scientific, which is a one time fee of $200.00. This allows JAWS to interact with the work desktop through what is called Remote Access.
Set up of this connection largely depends on how your work has this configured. Are you planning to work through RDP or do they use Citrix or something like that? That information would be good to know. I have seen JAWS work both ways, and it has been successful in both instances.
Good luck with this.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shannon
Sent: Friday, February 28, 2020 10:56 AM
To: main@jfw.groups.io
Subject: Re: Need step by instructions for setting up and useing remote jaws for work.

Ok, Thank yu for that but I need the Remote desktop control.
Is it different.
I need to get the laptop to remote into the desktop at work. Both on different internet connections so I can access the programs that run on my work desktop from home.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 8:39 AM
To: main@jfw.groups.io
Subject: Re: Need step by instructions for setting up and useing remote jaws for work.

for the regular Tandem, it is insert+alt+tab key which:
Toggles between the JAWS Tandem Controller window and the controller’s local computer.
Available only on the controler system, this keystroke suspends or resumes a JAWS Tandem session in order to toggle between the target system’s desktop and the controller system’s desktop.


-------- Original Message --------
From: Glenn / Lenny [mailto:glennervin@...]
To: <main@jfw.groups.io>
Date: Thursday, February 27, 2020, 8:31 PM
Subject: Need step by instructions for setting up and useing remote jaws for work.
Once you have taken control of a computer, it is just like being on the other computer.
There is a keyboard shortcut to toggle back and forth with Jaws Tandem as well, but I don't recall what it is.
Glenn

----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 7:24 PM
Subject: Re: Need step by instructions for setting up and useing remote jaws for work.


Ok, thanks again Glen.
I’ll take the laptop tomorrow and look at that setting. Are commands to use the remote copy of jaws the normal commands?
On Feb 27, 2020, at 7:05 PM, Glenn / Lenny <glennervin@...>
wrote:


Hi Shannon,
I think it is the Tandem Direct in utilities.
The menu says
Tandem Direct submenu
And down arrow there.
I have done tandem regular to help folks quite a few times before, but I have not tried Tandem direct.
I noticed that get access to a computer is not available on mine for some reason.
But at any rate, I think you will need to initiate the connection from work first.
HTH.
Glenn
----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 6:58 PM
Subject: Re: Need step by instructions for setting up and useing remote jaws for work.


Hello Glenn, and thanks for the reminder. Both copies are the same year.
Version number I mean. But I would want to copy at my work profile settings.
I didn’t think of that.
That part I think I know how to do. Import new settings for my back up. How do I use remote control? Do you know?
On Feb 27, 2020, at 6:49 PM, Glenn / Lenny <glennervin@...>
wrote:


Hi,
If you have exported your settings to a jaws settings file, you can eMail the file to your work, or bring it on a thumb drive and import it into the other Jaws.
Unless the Jaws at work is older than the Jaws you are currently using.
Glenn
----- Original Message ----- From: "Shannon" <shannon@...>
To: <jfw@groups.io>
Sent: Thursday, February 27, 2020 6:46 PM
Subject: Need step by instructions for setting up and useing remote jaws for work.




















.


moderated Re: Need step by instructions for setting up and useing remote jaws for work.

Shannon
 

Ok, Thank yu for that but I need the Remote desktop control.
Is it different.
I need to get the laptop to remote into the desktop at work. Both on different internet connections so I can access the programs that run on my work desktop from home.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 8:39 AM
To: main@jfw.groups.io
Subject: Re: Need step by instructions for setting up and useing remote jaws for work.

for the regular Tandem, it is insert+alt+tab key which:
Toggles between the JAWS Tandem Controller window and the controller’s
local computer.
Available only on the controler system, this keystroke suspends or
resumes a JAWS Tandem session in order to toggle between the target
system’s desktop and the controller system’s desktop.


-------- Original Message --------
From: Glenn / Lenny [mailto:glennervin@...]
To: <main@jfw.groups.io>
Date: Thursday, February 27, 2020, 8:31 PM
Subject: Need step by instructions for setting up and useing remote jaws
for work.
Once you have taken control of a computer, it is just like being on the
other computer.
There is a keyboard shortcut to toggle back and forth with Jaws Tandem as
well, but I don't recall what it is.
Glenn

----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 7:24 PM
Subject: Re: Need step by instructions for setting up and useing remote
jaws
for work.


Ok, thanks again Glen.
I’ll take the laptop tomorrow and look at that setting. Are commands to use
the remote copy of jaws the normal commands?
On Feb 27, 2020, at 7:05 PM, Glenn / Lenny <glennervin@...>
wrote:


Hi Shannon,
I think it is the Tandem Direct in utilities.
The menu says
Tandem Direct submenu
And down arrow there.
I have done tandem regular to help folks quite a few times before, but I
have not tried Tandem direct.
I noticed that get access to a computer is not available on mine for some
reason.
But at any rate, I think you will need to initiate the connection from work
first.
HTH.
Glenn
----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 6:58 PM
Subject: Re: Need step by instructions for setting up and useing remote
jaws
for work.


Hello Glenn, and thanks for the reminder. Both copies are the same year.
Version number I mean. But I would want to copy at my work profile
settings.
I didn’t think of that.
That part I think I know how to do. Import new settings for my back up. How
do I use remote control? Do you know?
On Feb 27, 2020, at 6:49 PM, Glenn / Lenny <glennervin@...>
wrote:


Hi,
If you have exported your settings to a jaws settings file, you can eMail
the file to your work, or bring it on a thumb drive and import it into the
other Jaws.
Unless the Jaws at work is older than the Jaws you are currently using.
Glenn
----- Original Message ----- From: "Shannon" <shannon@...>
To: <jfw@groups.io>
Sent: Thursday, February 27, 2020 6:46 PM
Subject: Need step by instructions for setting up and useing remote jaws
for
work.




















.


moderated Re: does jfw work very well with firefox?

JM Casey
 

You need at least JAWS 2018 to use Firefox, now, since the advent of Firefox Quantum (version 57 and up). Some people may tell you to use Firefox 52 ESR, but that version is no longer the ESR and is no longer supported with security patches or anything, really. You should really keep your browsers updated moreso than other programmes, since they are always accessing things on the internet, running code etc.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Ingram
Sent: February 28, 2020 5:01 AM
To: main@jfw.groups.io
Subject: Re: does jfw work very well with firefox?

 

Hi how are you? I had better success with jaws 18 because I don't think that jaws 16 worked well with firefox!

-----Original Message-----
From: Hank William Merchant
Sent: Feb 27, 2020 6:34 PM
To: main@jfw.groups.io
Subject: does jfw work very well with firefox?

 

Hello,

 

I am still using Jfw 18, can someone maybe please let me know if jfw works very well or maybe not with firefox? Do I maybe need to install jfw scripts before I am able to use jfw with firefox? Thanks in advance for any help I can get with this.

 

 

 

 

 

 

 

All the best,

 

Hank

 

 

 

 


moderated Re: Need step by instructions for setting up and useing remote jaws for work.

Mario
 

for the regular Tandem, it is insert+alt+tab key which:
Toggles between the JAWS Tandem Controller window and the controller’s local computer.
Available only on the controler system, this keystroke suspends or resumes a JAWS Tandem session in order to toggle between the target system’s desktop and the controller system’s desktop.

-------- Original Message --------
From: Glenn / Lenny [mailto:glennervin@...]
To: <main@jfw.groups.io>
Date: Thursday, February 27, 2020, 8:31 PM
Subject: Need step by instructions for setting up and useing remote jaws for work.
Once you have taken control of a computer, it is just like being on the
other computer.
There is a keyboard shortcut to toggle back and forth with Jaws Tandem as
well, but I don't recall what it is.
Glenn

----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 7:24 PM
Subject: Re: Need step by instructions for setting up and useing remote
jaws
for work.


Ok, thanks again Glen.
I’ll take the laptop tomorrow and look at that setting. Are commands to use
the remote copy of jaws the normal commands?
On Feb 27, 2020, at 7:05 PM, Glenn / Lenny <glennervin@...>
wrote:


Hi Shannon,
I think it is the Tandem Direct in utilities.
The menu says
Tandem Direct submenu
And down arrow there.
I have done tandem regular to help folks quite a few times before, but I
have not tried Tandem direct.
I noticed that get access to a computer is not available on mine for some
reason.
But at any rate, I think you will need to initiate the connection from work
first.
HTH.
Glenn
----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 6:58 PM
Subject: Re: Need step by instructions for setting up and useing remote
jaws
for work.


Hello Glenn, and thanks for the reminder. Both copies are the same year.
Version number I mean. But I would want to copy at my work profile
settings.
I didn’t think of that.
That part I think I know how to do. Import new settings for my back up. How
do I use remote control? Do you know?
On Feb 27, 2020, at 6:49 PM, Glenn / Lenny <glennervin@...>
wrote:


Hi,
If you have exported your settings to a jaws settings file, you can eMail
the file to your work, or bring it on a thumb drive and import it into the
other Jaws.
Unless the Jaws at work is older than the Jaws you are currently using.
Glenn
----- Original Message ----- From: "Shannon" <shannon@...>
To: <jfw@groups.io>
Sent: Thursday, February 27, 2020 6:46 PM
Subject: Need step by instructions for setting up and useing remote jaws
for
work.




















.


moderated Re: Can you import easily favorits list from internet explorer into firefox?

 

Every modern browser includes a feature, at setup, to import bookmarks/favorites from another browser.  Firefox certainly does.

I haven't used a manual export from the old browser and import to the new in a very long time except when someone has been using different browsers for different sets of sites.  Even then, it was only on the browser(s) not chosen for automatic import of bookmarks where this is necessary.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman


moderated Re: Need step by instructions for setting up and useing remote jaws for work.

Abraham Sweiss
 

First question, have you purchased the remote desktop license?

The detailed instructions should be in the jawss help section.

Thanks,abraham

On Feb 28, 2020, at 7:27 AM, Shannon <shannon@...> wrote:

Abraham, that is exactly what I am looking for. Do you have the step-by-step instructions for that?
Thank you
On Feb 27, 2020, at 10:50 PM, Abraham Sweiss <abrahamsweiss8@...> wrote:
The jaws remote desktop function does not require anyone to be at the other computer.

Thanks,abraham

On Feb 27, 2020, at 9:11 PM, Glenn / Lenny <glennervin@...> wrote:

what's the difference?

----- Original Message -----
From: "Abraham Sweiss" <abrahamsweiss8@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 8:06 PM
Subject: Re: Need step by instructions for setting up and useing remote jaws
for work.


Is the question regarding tandem or the remote desktop option.

These are two different functions. The first one is included with bass jaws,
the second one requires purchasing an additional license to support remote
desktop access.

Thanks,abraham

On Feb 27, 2020, at 8:05 PM, Glenn / Lenny <glennervin@...>
wrote:

Hi Shannon,
I think it is the Tandem Direct in utilities.
The menu says
Tandem Direct submenu
And down arrow there.
I have done tandem regular to help folks quite a few times before, but I
have not tried Tandem direct.
I noticed that get access to a computer is not available on mine for some
reason.
But at any rate, I think you will need to initiate the connection from
work
first.
HTH.
Glenn
----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 6:58 PM
Subject: Re: Need step by instructions for setting up and useing remote
jaws
for work.


Hello Glenn, and thanks for the reminder. Both copies are the same year.
Version number I mean. But I would want to copy at my work profile
settings.
I didn’t think of that.
That part I think I know how to do. Import new settings for my back up.
How
do I use remote control? Do you know?
On Feb 27, 2020, at 6:49 PM, Glenn / Lenny <glennervin@...>
wrote:
Hi,
If you have exported your settings to a jaws settings file, you can eMail
the file to your work, or bring it on a thumb drive and import it into the
other Jaws.
Unless the Jaws at work is older than the Jaws you are currently using.
Glenn
----- Original Message ----- From: "Shannon" <shannon@...>
To: <jfw@groups.io>
Sent: Thursday, February 27, 2020 6:46 PM
Subject: Need step by instructions for setting up and useing remote jaws
for
work.