moderated Re: MS EXCEL formula

Van Lant, Robin

I’ll give a crack at explaining this to build on what Anne was saying:

For simplicity in my mind, I’m going to approach this slightly different from Anne.

I am assuming that cell D14 has your first dollar amount to add to the running balance in Column E.

Step 1.  Go to cell E14 and type “=D14”.  This is just pulling in the value from column D into column E for this line item as the first item in your running balance.

Step 2: go down to Cell E15.  This is the first place where you’ll be adding a new line item to your running balance. Your formula should be “=E14+D15”.  This adds the value of the new line item to the balance listed in the cell above.

Step 3.  Go to cell E16 and press Control+D , which will copy the above formula into this cell, adjusting the cell references as needed.  You can do this same keystroke all the way down Column E to build that running balance.

There are other methods, but you seem to be a novice Excel user, so I’m leaving this simple.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Sunday, January 12, 2020 9:04 PM
To: main@jfw.groups.io
Subject: Re: MS EXCEL formula

Richard,

Is there a formula where the running balance/total can be in column E for example? Example: row 14 column D has \$22.50 and this should be seen in same row 14 but column E. The next row, 15, has in column D \$220.59 and row 15, column E should have the running total or sum. This would go down all rows and columns. Is this possible or just the total somewhere at the bottom cell where the total would be seen?

Thank you,

Rick

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Sunday, January 12, 2020 10:55 PM
To: main@jfw.groups.io
Subject: Re: MS EXCEL formula

You can put the formula anywhere in column e that you want the total to be.

The formula should be =sum(d14:d100)

Equals sum tells excel that you want to add numbers together.

open parenthesis d14 colon d100 close parenthesis tells it to add d14 through d100.

HTH,

Richard

"Reality is the leading cause of stress for those who are in touch with it."

-- from The Search for Signs of Intelligent Life in the Universe, by Jane Wagner

On Jan 12, 2020, at 7:39 PM, Rick Mladek <hmladek@...> wrote:

﻿

Hi all,

I am on an EXCEL spreadsheet, putting together a list of deductions for upcoming tax season.

Can anyone please explain how I add a formula to add up costs of items as a running total.

The costs are in column D and I am wanting the running balance in column E. Where do I put this formula and pardon my extreme ignorance here, what formula would I put in? The sum of these costs as they go down the column.

The costs start on row 14 column D and I would like this to go down the entire column, lets say to row 100 to be safe. Can someone please tell me the formula to put in and where this is embedded?

Thank you,

I am using Windows 10, Jaws 2019.1912.1 and Office 2019.

Thanks for your help,

Rick

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.

moderated Re: upgrading Jaws

Mario

a friend of my sister is looking to get back in to using JAWS with
Windows 10, but I'm not sure if she's several versions behind or never
used JAWS before. if I tell her if she can wait til the FS/VFO S&S
summer special, would she be able to save quite a bit on a first time
purchase if she never used JAWS before?

how would one know if there is going to be a special, and when will the
upcoming special begin?

-------- Original Message --------
From: Edward Green [mailto:ergreen1981@gmail.com]
To: main@jfw.groups.io
Date: Monday, January 13, 2020, 3:07 AM
Subject: upgrading Jaws
Hi Alison,

If you can hang on, I'd wait for the Freedom Scientific/VFO/Sight and
Sound summer special, and buy a new JAWS licence outright. This is
likely to be significantly cheaper if previous years' pricing is
anything to go by.

Cheers,

Ed

On 12 Jan 2020, at 17:55, Vaughn Brown <jazzdressage@gmail.com> wrote:

﻿I second Richard on all accounts.
Did you try cleaning between the keys? I use a small amount of rubbing
alcohol as it evaporates after a short time and will not damage any
sticky areas.
I am using JAWS 2020 and enjoy it. I did the \$90/year subscription.
Again, your situation with JAWS is based on affordability.
Hope this helps.
Vaughn

On 1/12/20, Richard Turner <richardturner42@outlook.com> wrote:
First, the problem with the keys acting like they are jammed down may not be
a Jaws issue, so no one should say one way or the other if that will solve
your problem.
Maybe you could specify what you have tried already to resolve that issue.
The current version is Jaws 2020, so if you have just Jaws 18, you would
need 2018, 2019 and 2020, but since you get a little better deal doing them
in groups of two, you may want to do through 2021.
Or, you could go with the subscription model at \$90 per year and jump right
into the 2020 version.
You'll have to do the math to see which makes the most sense in your
situation.
HTH,

Richard
"Reality is the leading cause of stress for those who are in touch with
it."
-- from The Search for Signs of Intelligent Life in the Universe, by Jane
Wagner

On Jan 12, 2020, at 8:01 AM, CJ &AA MAY <chrisalismay@gmail.com> wrote:

﻿
I was given a free migration from Window-eyes to Jaws 18 but would now like
to upgrade. I see the price varies dependent upon how many upgrades you
want. How many would I need to have the current version? Would the current
version get rid of this problem I am having with the alt and windows key
appearing as jammed down?
Alison

--
Kindly,
Vaughn Brown
Vaughn's Percussionship
Heal through Feel Equine Massage
360-904-8432
http://www.vaughnbrown.net
Serving Clark County

.

moderated Re: latest Jaws and emails reading as tables

Adrian Spratt

Thanks, Tom. I’m afraid that turns out to be the displayed setting, so any solution for my email tables problem lies elsewhere.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of tom x
Sent: Monday, January 13, 2020 1:30 AM
To: main@jfw.groups.io
Subject: Re: latest Jaws and emails reading as tables

Hi Adrian,

To locate the default section, do the following from the Desktop:

Press insert j and then arrow down to utilities and press enter

Press e for the settings centre

Check the top of the text to see if the settings relate to default.

Tab down to  web/html/pdfs and press the right arrow to open.

Arrow down to tables and press right arrow to open.

Make sure

Table presentation information for data tables only.

Is displayed and not for all tables. press spacebar to alter if necessary.

Tab down to the OK button to save.

Hope this helps.

Tom

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Adrian Spratt
Sent: Sunday, 12 January 2020 10:19 PM
To: main@jfw.groups.io
Subject: Re: latest Jaws and emails reading as tables

Tom, where is the “default settings section”? I’m still having the problem, and I’m hoping your solution will also be mine. Thanks.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of tom x
Sent: Sunday, January 12, 2020 2:44 AM
To: main@jfw.groups.io
Subject: Re: latest Jaws and emails reading as tables

Hi,

Thanks to all those who answered my query regarding jaws reading some  emails as tables.

The problem now seems to have been fixed after changing all tables to data tables in the default settings section.

Cheers

Tom

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Adrian Spratt
Sent: Friday, 10 January 2020 2:54 PM
To: main@jfw.groups.io
Subject: Re: latest Jaws and emails reading as tables

Tom,

You have to be very specific in how you search for this item, as follows:

Open an email message in Outlook and place focus in it. The “Layout table” item won’t appear otherwise.

Press JAWS key+v.

An edit field appears.

Type the six letters t a b l e s.

Now press enter.

Arrow down until JAWS verbalizes “Layout table, ignore.”

Once there, press the spacebar to cycle between checked or unchecked. You want the item checked.

I hope it makes a difference on your system. Sadly, it hasn’t on mine.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of tom x
Sent: Thursday, January 9, 2020 11:15 PM
To: main@jfw.groups.io
Subject: Re: latest Jaws and emails reading as tables

Hi Jonathan and thanks for your reply.

Unfortunately I was unable to locate anything using the term, “layout tables”in the Jaws quick settings.

Tom

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Cohn, Jonathan
Sent: Wednesday, 8 January 2020 6:17 AM
To: main@jfw.groups.io
Subject: Re: latest Jaws and emails reading as tables

First off verify that you have "layout" tables ignored  in your JAWS quick settings.  Also, there is aa Outlook function to "View in Browser", this used to be in the ribbon, but it seems to be hidden these days, and if activated warns you that the Browser is has a different security configuration from Outlook. You can add it into the Quick Access Bar if you think it would be useful.

Hopefully one of these will help,
Jonathan

moderated Re: MS EXCEL formula

Rick Mladek

Hi Ann, maybe I need more coffee as well. I'm lost and I must admit... can
you give me the formulas and steps for columns D and E with the starting
line of information/numbers being row 14 with row 13 blank.

Thank you and I am sorry...

Rick

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ann Byrne
Sent: Monday, January 13, 2020 7:33 AM
To: main@jfw.groups.io
Subject: Re: MS EXCEL formula

Hi, Rick,

Assuming the following formula in E14:
=e13+d14.
E13 should have your beginning balance, which would be 0 (Excel assumes a
blank is 0).
D14 should have the first number you want to add to the beginning balance,
e.g. 10.
So. the number in e14 (e13+d14) should be 10.
Copying/pasting the formula into f15, it should read =e14+D15.
So. E14 is 10, as calculated above; +d15 which is the next number you are
adding, say 32. E15 should equal 42.
And it carries on down, incrementing as you go.

Make sense? Only one cup of coffee so far, so if it doesn't I will drink
more and try to explain it better.

moderated Re: MS EXCEL formula

Rick Mladek

Richard, what is added is not important. I am adding numbers from one row, down the column, purely basic/simple...

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Monday, January 13, 2020 7:22 AM
To: main@jfw.groups.io
Subject: Re: MS EXCEL formula

Rick,

Perhaps you could give a little more detail about the structure of your spreadsheet.

What are you adding together to get the running total?

Richard

"Reality is the leading cause of stress for those who are in touch with it."

-- from The Search for Signs of Intelligent Life in the Universe, by Jane Wagner

On Jan 13, 2020, at 3:11 AM, Rick Mladek <hmladek@...> wrote:

﻿Good morning Ann,

Looking over your directions, now that I am alert, I have a question...

Your first point:
=d14+e13.  This should display the number in d14.

What do you mean by it should display the number in d14? The cost/amount is
in the D column beginning on row 14. The running sum/total needs displayed
down the E column. Is this how it will appear with the directions given?

Thank you,

Rick

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ann Byrne
Sent: Sunday, January 12, 2020 10:55 PM
To: main@jfw.groups.io
Subject: Re: MS EXCEL formula

The first instance of the formula would be in e14, right?

then.  With e13 blank, this would be the formula:
=d14+e13.  This should display the number in d14.

To propagate the formula down the page:

So.  Copy the formula in e14.
Then Ctrl+g (go to).
Type in the cells you want to hold the formula (e15:e100) and enter.
The cells will be selected.
Paste the formula ctrl+v.
that should do it.

good luck!

moderated Re: MS EXCEL formula

Ann Byrne

Hi, Rick,

Assuming the following formula in E14:
=e13+d14.
E13 should have your beginning balance, which would be 0 (Excel assumes a blank is 0).
D14 should have the first number you want to add to the beginning balance, e.g. 10.
So. the number in e14 (e13+d14) should be 10.
Copying/pasting the formula into f15, it should read
=e14+D15.
So. E14 is 10, as calculated above; +d15 which is the next number you are adding, say 32. E15 should equal 42.
And it carries on down, incrementing as you go.

Make sense? Only one cup of coffee so far, so if it doesn't I will drink more and try to explain it better.

moderated Re: MS EXCEL formula

Richard Turner

Rick,
Perhaps you could give a little more detail about the structure of your spreadsheet.
What are you adding together to get the running total?

Richard
"Reality is the leading cause of stress for those who are in touch with it."
-- from The Search for Signs of Intelligent Life in the Universe, by Jane Wagner

On Jan 13, 2020, at 3:11 AM, Rick Mladek <hmladek@...> wrote:

﻿Good morning Ann,

Looking over your directions, now that I am alert, I have a question...

Your first point:
=d14+e13.  This should display the number in d14.

What do you mean by it should display the number in d14? The cost/amount is
in the D column beginning on row 14. The running sum/total needs displayed
down the E column. Is this how it will appear with the directions given?

Thank you,

Rick

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ann Byrne
Sent: Sunday, January 12, 2020 10:55 PM
To: main@jfw.groups.io
Subject: Re: MS EXCEL formula

The first instance of the formula would be in e14, right?

then.  With e13 blank, this would be the formula:
=d14+e13.  This should display the number in d14.

To propagate the formula down the page:

So.  Copy the formula in e14.
Then Ctrl+g (go to).
Type in the cells you want to hold the formula (e15:e100) and enter.
The cells will be selected.
Paste the formula ctrl+v.
that should do it.

good luck!

moderated Re: MS EXCEL formula

Rick Mladek

Good morning Ann,

Looking over your directions, now that I am alert, I have a question...

Your first point:
=d14+e13. This should display the number in d14.

What do you mean by it should display the number in d14? The cost/amount is
in the D column beginning on row 14. The running sum/total needs displayed
down the E column. Is this how it will appear with the directions given?

Thank you,

Rick

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ann Byrne
Sent: Sunday, January 12, 2020 10:55 PM
To: main@jfw.groups.io
Subject: Re: MS EXCEL formula

The first instance of the formula would be in e14, right?

then. With e13 blank, this would be the formula:
=d14+e13. This should display the number in d14.

To propagate the formula down the page:

So. Copy the formula in e14.
Then Ctrl+g (go to).
Type in the cells you want to hold the formula (e15:e100) and enter.
The cells will be selected.
Paste the formula ctrl+v.
that should do it.

good luck!

moderated Re: upgrading Jaws

CJ &AA MAY

The keys don’t actually get stuck down but behave as though they are. We have tried cleaning them.

I had a feeling that this was discussed before Christmas and I wasn’t alone with this issue where the computer behaves as though the alt key or windows key is still depressed.

I think I will take Ed’s advice and wait till the summer before upgrading Jaws and take advantage of Sight and Sound’s Summer Deal as it looks as if it will cost me around £350 to upgrade from Jaws 18 to the current version.

Alison

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: 12 January 2020 17:26
To: main@jfw.groups.io
Subject: Re: upgrading Jaws

First, the problem with the keys acting like they are jammed down may not be a Jaws issue, so no one should say one way or the other if that will solve your problem.

Maybe you could specify what you have tried already to resolve that issue.

The current version is Jaws 2020, so if you have just Jaws 18, you would need 2018, 2019 and 2020, but since you get a little better deal doing them in groups of two, you may want to do through 2021.

Or, you could go with the subscription model at \$90 per year and jump right into the 2020 version.

You'll have to do the math to see which makes the most sense in your situation.

HTH,

Richard

"Reality is the leading cause of stress for those who are in touch with it."

-- from The Search for Signs of Intelligent Life in the Universe, by Jane Wagner

On Jan 12, 2020, at 8:01 AM, CJ &AA MAY <chrisalismay@...> wrote:

﻿

I was given a free migration from Window-eyes to Jaws 18 but would now like to upgrade. I see the price varies dependent upon how many upgrades you want. How many would I need to have the current version? Would the current version get rid of this problem I am having with the alt and windows key appearing as jammed down?

Alison

moderated Re: upgrading Jaws

CJ &AA MAY

Thanks for this advice. This sounds like the sensible thing to do.
Alison

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Edward Green
Sent: 13 January 2020 08:07
To: main@jfw.groups.io
Subject: Re: upgrading Jaws

Hi Alison,

If you can hang on, I'd wait for the Freedom Scientific/VFO/Sight and Sound summer special, and buy a new JAWS licence outright. This is likely to be significantly cheaper if previous years' pricing is anything to go by.

Cheers,

Ed

On 12 Jan 2020, at 17:55, Vaughn Brown <jazzdressage@gmail.com> wrote:

﻿I second Richard on all accounts.
Did you try cleaning between the keys? I use a small amount of rubbing
alcohol as it evaporates after a short time and will not damage any
sticky areas.
I am using JAWS 2020 and enjoy it. I did the \$90/year subscription.
Again, your situation with JAWS is based on affordability.
Hope this helps.
Vaughn

On 1/12/20, Richard Turner <richardturner42@outlook.com> wrote:
First, the problem with the keys acting like they are jammed down may
not be a Jaws issue, so no one should say one way or the other if
that will solve your problem.
Maybe you could specify what you have tried already to resolve that issue.
The current version is Jaws 2020, so if you have just Jaws 18, you
would need 2018, 2019 and 2020, but since you get a little better
deal doing them in groups of two, you may want to do through 2021.
Or, you could go with the subscription model at \$90 per year and jump
right into the 2020 version.
You'll have to do the math to see which makes the most sense in your
situation.
HTH,

Richard
"Reality is the leading cause of stress for those who are in touch
with it."
-- from The Search for Signs of Intelligent Life in the Universe, by
Jane Wagner

On Jan 12, 2020, at 8:01 AM, CJ &AA MAY <chrisalismay@gmail.com> wrote:

﻿
I was given a free migration from Window-eyes to Jaws 18 but would
now like to upgrade. I see the price varies dependent upon how many
upgrades you want. How many would I need to have the current version?
Would the current version get rid of this problem I am having with
the alt and windows key appearing as jammed down?
Alison

--
Kindly,
Vaughn Brown
Vaughn's Percussionship
Heal through Feel Equine Massage
360-904-8432
http://www.vaughnbrown.net
Serving Clark County

moderated Re: upgrading Jaws

Edward Green

Hi Alison,

If you can hang on, I'd wait for the Freedom Scientific/VFO/Sight and Sound summer special, and buy a new JAWS licence outright. This is likely to be significantly cheaper if previous years' pricing is anything to go by.

Cheers,

Ed

On 12 Jan 2020, at 17:55, Vaughn Brown <jazzdressage@gmail.com> wrote:

﻿I second Richard on all accounts.
Did you try cleaning between the keys? I use a small amount of rubbing
alcohol as it evaporates after a short time and will not damage any
sticky areas.
I am using JAWS 2020 and enjoy it. I did the \$90/year subscription.
Again, your situation with JAWS is based on affordability.
Hope this helps.
Vaughn

On 1/12/20, Richard Turner <richardturner42@outlook.com> wrote:
First, the problem with the keys acting like they are jammed down may not be
a Jaws issue, so no one should say one way or the other if that will solve
your problem.
Maybe you could specify what you have tried already to resolve that issue.
The current version is Jaws 2020, so if you have just Jaws 18, you would
need 2018, 2019 and 2020, but since you get a little better deal doing them
in groups of two, you may want to do through 2021.
Or, you could go with the subscription model at \$90 per year and jump right
into the 2020 version.
You'll have to do the math to see which makes the most sense in your
situation.
HTH,

Richard
"Reality is the leading cause of stress for those who are in touch with
it."
-- from The Search for Signs of Intelligent Life in the Universe, by Jane
Wagner

On Jan 12, 2020, at 8:01 AM, CJ &AA MAY <chrisalismay@gmail.com> wrote:

﻿
I was given a free migration from Window-eyes to Jaws 18 but would now like
to upgrade. I see the price varies dependent upon how many upgrades you
want. How many would I need to have the current version? Would the current
version get rid of this problem I am having with the alt and windows key
appearing as jammed down?
Alison

--
Kindly,
Vaughn Brown
Vaughn's Percussionship
Heal through Feel Equine Massage
360-904-8432
http://www.vaughnbrown.net
Serving Clark County

moderated Performing Jaws layered keystrokes with a Refreshabraille 18?

Hi,

Is there a way to activate a Jaws layered keystroke, such as Insert+Space+T (Table Mode), Insert+Space+o (OCR) etc, from a braille display, specifically an APH Refreshabraille 18? Is there a way to add this command if it does not exist?

Thanks,

~Ann

moderated Re: latest Jaws and emails reading as tables

tom x

Hi Adrian,

To locate the default section, do the following from the Desktop:

Press insert j and then arrow down to utilities and press enter

Press e for the settings centre

Check the top of the text to see if the settings relate to default.

Tab down to  web/html/pdfs and press the right arrow to open.

Arrow down to tables and press right arrow to open.

Make sure

Table presentation information for data tables only.

Is displayed and not for all tables. press spacebar to alter if necessary.

Tab down to the OK button to save.

Hope this helps.

Tom

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Adrian Spratt
Sent: Sunday, 12 January 2020 10:19 PM
To: main@jfw.groups.io
Subject: Re: latest Jaws and emails reading as tables

Tom, where is the “default settings section”? I’m still having the problem, and I’m hoping your solution will also be mine. Thanks.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of tom x
Sent: Sunday, January 12, 2020 2:44 AM
To: main@jfw.groups.io
Subject: Re: latest Jaws and emails reading as tables

Hi,

Thanks to all those who answered my query regarding jaws reading some  emails as tables.

The problem now seems to have been fixed after changing all tables to data tables in the default settings section.

Cheers

Tom

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Adrian Spratt
Sent: Friday, 10 January 2020 2:54 PM
To: main@jfw.groups.io
Subject: Re: latest Jaws and emails reading as tables

Tom,

You have to be very specific in how you search for this item, as follows:

Open an email message in Outlook and place focus in it. The “Layout table” item won’t appear otherwise.

Press JAWS key+v.

An edit field appears.

Type the six letters t a b l e s.

Now press enter.

Arrow down until JAWS verbalizes “Layout table, ignore.”

Once there, press the spacebar to cycle between checked or unchecked. You want the item checked.

I hope it makes a difference on your system. Sadly, it hasn’t on mine.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of tom x
Sent: Thursday, January 9, 2020 11:15 PM
To: main@jfw.groups.io
Subject: Re: latest Jaws and emails reading as tables

Hi Jonathan and thanks for your reply.

Unfortunately I was unable to locate anything using the term, “layout tables”in the Jaws quick settings.

Tom

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Cohn, Jonathan
Sent: Wednesday, 8 January 2020 6:17 AM
To: main@jfw.groups.io
Subject: Re: latest Jaws and emails reading as tables

First off verify that you have "layout" tables ignored  in your JAWS quick settings.  Also, there is aa Outlook function to "View in Browser", this used to be in the ribbon, but it seems to be hidden these days, and if activated warns you that the Browser is has a different security configuration from Outlook. You can add it into the Quick Access Bar if you think it would be useful.

Hopefully one of these will help,
Jonathan

moderated FW: [win10] Edge 79: if your screen reader is having trouble working with web content shown in Edge...

From: win10@win10.groups.io <win10@win10.groups.io> On Behalf Of Joseph Lee via Groups.Io
Sent: Sunday, January 12, 2020 10:25 PM
To: win10@win10.groups.io
Subject: [win10] Edge 79: if your screen reader is having trouble working with web content shown in Edge... #ChromiumEdge

Hi all,

Someone reported on JFW list (hosted on Groups.IO) that the user cannot interact with certain web content displayed in Edge 79 beta, along with a thread on Win10 forum about inability to interact with web content shown in Edge with other screen readers. This issue can be traced to the fact that, in Edge 79 (upcoming stable version), UI Automation is enabled (several reports were sent to Microsoft about this issue). Unfortunately, as an NVDA core developer (not me) notes, UIA implementation in Chromium-based web browsers (including Edge) isn’t solid yet.

To work around this for now, you need to disable UIA support in Edge and other Chromium-based web browsers (if your browser exposes this option). To do so in Edge 79:

1. Start new Microsoft Edge (not the old one).
2. From address omnibox (Alt+D), type “edge://flags” (without quotes and as exactly as shown) and press Enter.
3. Type “UI Automation” into “search flags” and press Tab to move through resulting content (no, DO NOT PRESS ENTER AFTER TYPING FLAGS!).
4. Go to “Native UI Automation” combo box and select “disabled”.
5. Press Tab to go to “Restart” button and click it.

Screen reader specifics:

• Narrator: supports native UI Automation
• JAWS: works better with native UI Automation off
• NVDA: works better with UI Automation off and a fix is being developed
• Other screen readers: contact vendors

Cheers,

Joseph

moderated Re: ISO someone who writes Jaws scripts

Rayn Darren

Thank you so much for the suggestions David! I've reached out to Brian already actually and he's busy until March. :). I'll see what the others have to offer though.

Thanks again,

Sarah

On 1/12/2020 12:01 AM, David Goldfield wrote:
For customized JAWS script writing I highly recommend Brian Hartgen, <www.hartgen.org> who is just amazing.

You can also contact Level Access <https://www.levelaccess.com/solutions/services/access-world-class-assistive-technology-scripting-expertise/> as well as the Paciello Group.<http://www.flying-blind.com/ads2019/09192019/index.html>

<http://www.flying-blind.com/ads2019/09192019/index.html>

<http://www.flying-blind.com/ads2019/09192019/index.html>

<http://www.flying-blind.com/ads2019/09192019/index.html>

David Goldfield,
Blindness Assistive Technology Specialist
JAWS Certified, 2019

WWW.DavidGoldfield.org<http://WWW.DavidGoldfield.org>

On 1/10/2020 11:57 AM, Rayn Darren wrote:
HI Sieghard,

Will do, thank you so much!

Sarah

On 1/10/2020 8:56 AM, Sieghard Weitzel wrote:
You could contact Brian Hartgen from Hartgen Consultancy<https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.hartgen.org%2F&;data=02%7C01%7C%7C613d1841d00b4e83e24008d795ee3dc6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637142722772780854&amp;sdata=MHezIWISODf%2F9ePGHMoRdixkTMzpgzcbFJQJxCJR9rM%3D&amp;reserved=0><https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.hartgen.org%2F&;data=02%7C01%7C%7C613d1841d00b4e83e24008d795ee3dc6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637142722772780854&amp;sdata=MHezIWISODf%2F9ePGHMoRdixkTMzpgzcbFJQJxCJR9rM%3D&amp;reserved=0>, he's probably as good as they get.

-----Original Message-----
From: main@jfw.groups.io<mailto:main@jfw.groups.io> <main@jfw.groups.io><mailto:main@jfw.groups.io> On Behalf Of Rayn Darren
Sent: Thursday, January 9, 2020 2:05 PM
To: main@jfw.groups.io<mailto:main@jfw.groups.io>
Subject: ISO someone who writes Jaws scripts

Hi all,

I have a client who's looking for a particular script to be written for Jaws, he has 2020. This script needs to announce the numbers as they change in a stock ticker. These are updated in real time. If anyone could help with inof on this I'd really appreciate it.

Thanks in advance,

Sarah

moderated Re: ISO someone who writes Jaws scripts

Rayn Darren

Thanks for the suggestion Rod!

On 1/12/2020 4:52 AM, Rod wrote:
Jackie McBride on this list is also superb and talented. You can’t go wrong with her.

Rod Alcidonis, Esq.

From: David Goldfield
Sent: Sunday, January 12, 2020 3:01 AM
To: main@jfw.groups.io
Subject: Re: ISO someone who writes Jaws scripts

For customized JAWS script writing I highly recommend Brian Hartgen, who is just amazing.

You can also contact Level Access as well as the Paciello Group.

David Goldfield,
Blindness Assistive Technology Specialist
JAWS Certified, 2019

WWW.DavidGoldfield.orgOn 1/10/2020 11:57 AM, Rayn Darren wrote:

HI Sieghard,

Will do, thank you so much!

Sarah

On 1/10/2020 8:56 AM, Sieghard Weitzel wrote:

You could contact Brian Hartgen from Hartgen Consultancy<https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.hartgen.org%2F&;data=02%7C01%7C%7C613d1841d00b4e83e24008d795ee3dc6%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637142722772780854&amp;sdata=MHezIWISODf%2F9ePGHMoRdixkTMzpgzcbFJQJxCJR9rM%3D&amp;reserved=0>, he's probably as good as they get.

-----Original Message-----
From: main@jfw.groups.io mailto:main@jfw.groups.io On Behalf Of Rayn Darren
Sent: Thursday, January 9, 2020 2:05 PM
To: main@jfw.groups.io
Subject: ISO someone who writes Jaws scripts

Hi all,

I have a client who's looking for a particular script to be written for Jaws, he has 2020. This script needs to announce the numbers as they change in a stock ticker. These are updated in real time. If anyone could help with inof on this I'd really appreciate it.

Thanks in advance,

Sarah

moderated Re: ISO someone who writes Jaws scripts

Rayn Darren

Best of luck David!

On 1/12/2020 12:03 AM, David Goldfield wrote:
I'm actually working my way through Brian Hartgen's JAWS script writing course. I'm finding it very easy but I am in no way an expert and am not ready to write customized scripts for others, as of now.

David Goldfield,
Blindness Assistive Technology Specialist
JAWS Certified, 2019

WWW.DavidGoldfield.org<http://WWW.DavidGoldfield.org>

On 1/10/2020 11:56 AM, Sieghard Weitzel wrote:

You could contact Brian Hartgen from Hartgen Consultancy<https://nam11.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.hartgen.org%2F&data=02%7C01%7C%7C0bb2b7e8667444c1d08308d795ee09c7%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637142721899849586&sdata=8c0G%2FomJZymhnSxD3s9ItU9EtlU7%2FVuFW6viAhgK54k%3D&reserved=0>, he's probably as good as they get.

-----Original Message-----
From: main@jfw.groups.io<mailto:main@jfw.groups.io> <main@jfw.groups.io><mailto:main@jfw.groups.io> On Behalf Of Rayn Darren
Sent: Thursday, January 9, 2020 2:05 PM
To: main@jfw.groups.io<mailto:main@jfw.groups.io>
Subject: ISO someone who writes Jaws scripts

Hi all,

I have a client who's looking for a particular script to be written for Jaws, he has 2020. This script needs to announce the numbers as they change in a stock ticker. These are updated in real time. If anyone could help with inof on this I'd really appreciate it.

Thanks in advance,

Sarah

moderated Re: MS EXCEL formula

Rick Mladek

Thank you Ann, I'll give this a shot in the morning. I'm calling it a day
with being in my office for near 12 hours now. Time to call it a day for
tomorrow 5:30 AM comes early.

Thank you again,

Rick

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ann Byrne
Sent: Sunday, January 12, 2020 10:55 PM
To: main@jfw.groups.io
Subject: Re: MS EXCEL formula

The first instance of the formula would be in e14, right?

then. With e13 blank, this would be the formula:
=d14+e13. This should display the number in d14.

To propagate the formula down the page:

So. Copy the formula in e14.
Then Ctrl+g (go to).
Type in the cells you want to hold the formula (e15:e100) and enter.
The cells will be selected.
Paste the formula ctrl+v.
that should do it.

good luck!

moderated Re: MS EXCEL formula

Rick Mladek

Richard,

Is there a formula where the running balance/total can be in column E for example? Example: row 14 column D has \$22.50 and this should be seen in same row 14 but column E. The next row, 15, has in column D \$220.59 and row 15, column E should have the running total or sum. This would go down all rows and columns. Is this possible or just the total somewhere at the bottom cell where the total would be seen?

Thank you,

Rick

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Sunday, January 12, 2020 10:55 PM
To: main@jfw.groups.io
Subject: Re: MS EXCEL formula

You can put the formula anywhere in column e that you want the total to be.

The formula should be =sum(d14:d100)

Equals sum tells excel that you want to add numbers together.

open parenthesis d14 colon d100 close parenthesis tells it to add d14 through d100.

HTH,

Richard

"Reality is the leading cause of stress for those who are in touch with it."

-- from The Search for Signs of Intelligent Life in the Universe, by Jane Wagner

On Jan 12, 2020, at 7:39 PM, Rick Mladek <hmladek@...> wrote:

﻿

Hi all,

I am on an EXCEL spreadsheet, putting together a list of deductions for upcoming tax season.

Can anyone please explain how I add a formula to add up costs of items as a running total.

The costs are in column D and I am wanting the running balance in column E. Where do I put this formula and pardon my extreme ignorance here, what formula would I put in? The sum of these costs as they go down the column.

The costs start on row 14 column D and I would like this to go down the entire column, lets say to row 100 to be safe. Can someone please tell me the formula to put in and where this is embedded?

Thank you,

I am using Windows 10, Jaws 2019.1912.1 and Office 2019.

Thanks for your help,

Rick

moderated Re: MS EXCEL formula

Ann Byrne

The first instance of the formula would be in e14, right?

then. With e13 blank, this would be the formula:
=d14+e13. This should display the number in d14.

To propagate the formula down the page:

So. Copy the formula in e14.
Then Ctrl+g (go to).
Type in the cells you want to hold the formula (e15:e100) and enter.
The cells will be selected.
Paste the formula ctrl+v.
that should do it.

good luck!

 17601 - 17620 of 92237