Date   
moderated Re: table row number

tom x
 

Hi George,

 

I need the row number to be spoken by Jaws when arrowing slowly up the table column. If arrowing up at a normal speed then Jaws skips the row announcement and just reads the cell contents which is the desired result.

 

Currently, using the Jaws 2020 version released in the past week, Jaws does not announce any row number regardless of the arrowing speed. The row announcement was  spoken under the final 2019 version as well as the 2020 version released in late October.  I made the settings in the just released version the same as the settings in the 2019 version but this had no effect. That is, after making sure the settings relating to “default application” and saved with shift control d.

 

After trying numerous settings, I have come to the conclusion that a bug has crept into the latest 2020 Jaws update.

 

I’ll contact F S and make a report early in the new year.

 

Cheers

Tom

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of george b
Sent: Sunday, 15 December 2019 11:00 PM
To: main@jfw.groups.io
Subject: Re: table row number

 

Tell me exactully again what you wish.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of tom x
Sent: December 14, 2019 22:17
To: main@jfw.groups.io
Subject: Re: table row number

 

Thanks for your reply and instructions George.

 

I have tried all of the steps on numerous occasions but still cannot get Jaws to read the row position in a table while using the latest version released only a few days ago.

 

However, if I change to the final copy of Jaws 19 then the row number is spoken as normal.  It appears to me that something has been broken in the latest 2020 version.

 

Cheers

Tom

 

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of george b
Sent: Saturday, 14 December 2019 10:13 PM
To: main@jfw.groups.io
Subject: Re: table row number

 

In a web page

Go to system settings with jaws key plus 6 on the number row

Tabe once and you hear users

Arrow once and you hear Web / HTML / PDFs

Arrow right once and you hear the same as above with open on the end

Arrow down to you hear tables and right arrow

Arrow down to you hear \\Tables\Web / HTML / PDFs \Table Presentation Information and then then press space bar and it changes to for all tables

Now quit the system settings and it will ask you if you wish to save the changes and choose yes and that should do it

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of tom x
Sent: December 13, 2019 22:06
To: main@jfw.groups.io
Subject: Re: table row number

 

Thanks for your reply George but cannot locate “internet” under the users heading or anywhere else for that matter.

 

Tables are mentioned under navigation but changing settings here does not seem to make any difference as far as I can tell.

 

Cheers

Tom

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of george b
Sent: Saturday, 14 December 2019 1:00 AM
To: main@jfw.groups.io
Subject: Re: table row number

 

Go to system settings with insert/jaws key and 6 on the number row

Choose defalt settings

Tab to you hear users and arrowdown to internet…, I do not remember the entire string but it is the only in the list which starts with interned, hit enter and arrow down to tables and hit enter, and arrown down once to

 Tables… and arrow right once and arrow down once to all

 

Close the system settings and it will ask you to save and choose yes

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of tom x
Sent: December 12, 2019 21:32
To: main@jfw.groups.io
Subject: table row number

 

Hi,

 

Prior to installing the latest Jaws 64 bit update a few days ago, Jaws would read the row position in a web based table as  I arrowed    up the column but since the update, Jaws no longer gives this information.

 

Can someone inform me which settings need to be changed so once more Jaws can give this info?

 

Thanks

 

Tom

 

moderated Re: using Jaws on a mac

michaeel's mail
 

Hi John try the link below to subscribe to the blind apples list.

Cheers Michael.


BlindApples+subscribe@groups.io

On 16/12/2019 4:17 am, John Skyner wrote:

Hi all

 

I am wanting to try and set up a vm on a Apple Mac and have Windows and Jaws on it.

 

Does anyone have a link to a Mac user list so I can get information and help on how to do this.

 

Many thanks

 

John

moderated using Jaws on a mac

John Skyner
 

Hi all

 

I am wanting to try and set up a vm on a Apple Mac and have Windows and Jaws on it.

 

Does anyone have a link to a Mac user list so I can get information and help on how to do this.

 

Many thanks

 

John

moderated Re: saving documents in Word

Dan Longmore
 

Hi,

  You can change where the document is saved under Wordc Options.

In Word:

Hit ALT  & F

Hit “T” on keyboard

Arrow down to “Save”

Make your changes.

  I can choose to save to One Drive and later I can choose to save to “This Computer”

   Both of these are check boxes.

I can also choose to save a any location through the Browse button.

 

Hope this helps.

  Also, you can turn on and off the “Auto Save” functions in this area.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Pastor Gil Pries
Sent: Saturday, December 14, 2019 4:51 PM
To: main@jfw.groups.io
Subject: Re: saving documents in Word

 

I use f 12 and it defaults to my documents.

 

Pastor Gil

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Saturday, December 14, 2019 1:06 PM
To: main@jfw.groups.io
Subject: Re: saving documents in Word

 

Hi,

  I am not, at the moment, sure of where the setting is that can fix this.  It occurs because of One Drive and Office 365.  My workaround is I hit F12 and save as another document with a different file name.  Also, I do not use AutoSave function.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Saturday, December 14, 2019 1:48 PM
To: main@jfw.groups.io
Subject: Re: saving documents in Word

 

You might want to check the saving options you have by hitting alt+f, then t, and arrow down to saving and tab through there.

I’m not sure what would cause your issue, I always get prompted to save my changes.

.

 

 

Richard

 

🖖 Live long and prosper

 

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of CJ &AA MAY
Sent: Saturday, December 14, 2019 8:59 AM
To: main@jfw.groups.io
Subject: Re: saving documents in Word

 

I am using Jaws 18 with Windows 10 and Office 365.

Until relatively recently, when closing a document in MS Word with alt f4 or control f4, if I’d made changes, I would be asked if I wanted to save the changes before closing. But now it just closes and saves.

Today this was a real nuisance as I’d slightly customised my Christmas letter for an individual, but I hadn’t intended this to change the original letter which still needs to go out to some people. When I closed it though, it didn’t ask if I wanted to save the changes – it just did so!

How in future can I prevent this from happening?

Alison

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
Sent: 06 December 2019 02:08
To: JFW List <main@jfw.groups.io>
Subject: New FS Blog: Three Reasons to Use Google’s Webmail Option with JAWS

 

 

 

WordPress.com

 

New post on Freedom Scientific Blog

Three Reasons to Use Google’s Webmail Option with JAWS
by
Elizabeth Whitaker

 

Gmail is a widely-used email service that is used at home,
work, and school. While it can be accessed through a desktop email application
such as Microsoft Outlook, its webmail option provides more versatility.

 

Google’s webmail option provides Gmail users a flexible
alternative for accessing email from computers and mobile devices. A web
browser and Internet connection are all you need to begin sending and receiving
messages.

 

When you access Gmail through this form of internet-based
email, messages are stored on a web server, rather than on your computer or
device. This frees up disk space and memory for other important files. Here are
three reasons to consider choosing Google’s webmail option when accessing Gmail
with JAWS.

 

Access Your Email from Anywhere

 

When using Google’s webmail option, you can access messages
from anywhere on any computer or mobile device. This is especially convenient
if you travel frequently or need to access email between appointments. Because
your email is all on the cloud, you can also search for and respond to messages
quickly and efficiently without accessing a dedicated computer or software.

 

No Additional Software Is Required

 

Webmail doesn’t require the installation of dedicated
software. Simply open your web browser, go to Gmail, and your messages will be
displayed.

 

Access Your Email Using Familiar JAWS and Web Page Navigation Commands

 

Since Google’s webmail is displayed in your web browser, you
can use JAWS Quick Nav keys and other navigation keystrokes when working with
messages. These familiar commands make learning easier.

 

Want to get the most out of accessing Gmail? Check out our
instructional tutorial,
Gmail and JAWS
 today. You’ll learn how to compose a new email, read messages, search
your inbox, and much more.

 

Download the MP4 or stream the MP3, plus use the included
resources to supplement your learning experience.

 

Elizabeth Whitaker
 | December 5, 2019 at 7:38 pm | Tags:


Take care.  Mike.  Sent from my iBarstool.  Go Rams!
Arguing with a woman is like reading a software license agreement.  In the end you have to ignore everything, & click I agree.

moderated Re: table row number

Faraz
 

your changed settings are not working because you are not saving into default directory. to do that you should press control+shift+d after making changes into jaws setting center.


Faraz q.



On 15/12/2019 5:59 PM, george b wrote:

Tell me exactully again what you wish.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of tom x
Sent: December 14, 2019 22:17
To: main@jfw.groups.io
Subject: Re: table row number

 

Thanks for your reply and instructions George.

 

I have tried all of the steps on numerous occasions but still cannot get Jaws to read the row position in a table while using the latest version released only a few days ago.

 

However, if I change to the final copy of Jaws 19 then the row number is spoken as normal.  It appears to me that something has been broken in the latest 2020 version.

 

Cheers

Tom

 

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of george b
Sent: Saturday, 14 December 2019 10:13 PM
To: main@jfw.groups.io
Subject: Re: table row number

 

In a web page

Go to system settings with jaws key plus 6 on the number row

Tabe once and you hear users

Arrow once and you hear Web / HTML / PDFs

Arrow right once and you hear the same as above with open on the end

Arrow down to you hear tables and right arrow

Arrow down to you hear \\Tables\Web / HTML / PDFs \Table Presentation Information and then then press space bar and it changes to for all tables

Now quit the system settings and it will ask you if you wish to save the changes and choose yes and that should do it

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of tom x
Sent: December 13, 2019 22:06
To: main@jfw.groups.io
Subject: Re: table row number

 

Thanks for your reply George but cannot locate “internet” under the users heading or anywhere else for that matter.

 

Tables are mentioned under navigation but changing settings here does not seem to make any difference as far as I can tell.

 

Cheers

Tom

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of george b
Sent: Saturday, 14 December 2019 1:00 AM
To: main@jfw.groups.io
Subject: Re: table row number

 

Go to system settings with insert/jaws key and 6 on the number row

Choose defalt settings

Tab to you hear users and arrowdown to internet…, I do not remember the entire string but it is the only in the list which starts with interned, hit enter and arrow down to tables and hit enter, and arrown down once to

 Tables… and arrow right once and arrow down once to all

 

Close the system settings and it will ask you to save and choose yes

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of tom x
Sent: December 12, 2019 21:32
To: main@jfw.groups.io
Subject: table row number

 

Hi,

 

Prior to installing the latest Jaws 64 bit update a few days ago, Jaws would read the row position in a web based table as  I arrowed    up the column but since the update, Jaws no longer gives this information.

 

Can someone inform me which settings need to be changed so once more Jaws can give this info?

 

Thanks

 

Tom

 

-- 

With best regards,
Faraz q. 
C.E.O. Estate Point
Cell\Whats app\Face time: +923218405089
www.facebook.com/estatepoint786

moderated Re: College Algrebra

Vaughn Brown
 

Hi HH,

My best advice is to study algebra in Braille. This way you can follow
the math problem.

Vaughn

On 12/14/19, HH. Smith Jr. <josham129@...> wrote:
Hello fellow listerrs,



I am going to college in January of next year and I am wondering if anyone
has any experience with algebra using JAWS. Any tricks and tips will be
greatly appreciated.



Thx,




--
Kindly,
Vaughn Brown
Vaughn's Percussionship
Heal through Feel Equine Massage
360-904-8432
http://www.vaughnbrown.net
Serving Clark County

moderated Re: table row number

george b
 

Tell me exactully again what you wish.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of tom x
Sent: December 14, 2019 22:17
To: main@jfw.groups.io
Subject: Re: table row number

 

Thanks for your reply and instructions George.

 

I have tried all of the steps on numerous occasions but still cannot get Jaws to read the row position in a table while using the latest version released only a few days ago.

 

However, if I change to the final copy of Jaws 19 then the row number is spoken as normal.  It appears to me that something has been broken in the latest 2020 version.

 

Cheers

Tom

 

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of george b
Sent: Saturday, 14 December 2019 10:13 PM
To: main@jfw.groups.io
Subject: Re: table row number

 

In a web page

Go to system settings with jaws key plus 6 on the number row

Tabe once and you hear users

Arrow once and you hear Web / HTML / PDFs

Arrow right once and you hear the same as above with open on the end

Arrow down to you hear tables and right arrow

Arrow down to you hear \\Tables\Web / HTML / PDFs \Table Presentation Information and then then press space bar and it changes to for all tables

Now quit the system settings and it will ask you if you wish to save the changes and choose yes and that should do it

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of tom x
Sent: December 13, 2019 22:06
To: main@jfw.groups.io
Subject: Re: table row number

 

Thanks for your reply George but cannot locate “internet” under the users heading or anywhere else for that matter.

 

Tables are mentioned under navigation but changing settings here does not seem to make any difference as far as I can tell.

 

Cheers

Tom

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of george b
Sent: Saturday, 14 December 2019 1:00 AM
To: main@jfw.groups.io
Subject: Re: table row number

 

Go to system settings with insert/jaws key and 6 on the number row

Choose defalt settings

Tab to you hear users and arrowdown to internet…, I do not remember the entire string but it is the only in the list which starts with interned, hit enter and arrow down to tables and hit enter, and arrown down once to

 Tables… and arrow right once and arrow down once to all

 

Close the system settings and it will ask you to save and choose yes

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of tom x
Sent: December 12, 2019 21:32
To: main@jfw.groups.io
Subject: table row number

 

Hi,

 

Prior to installing the latest Jaws 64 bit update a few days ago, Jaws would read the row position in a web based table as  I arrowed    up the column but since the update, Jaws no longer gives this information.

 

Can someone inform me which settings need to be changed so once more Jaws can give this info?

 

Thanks

 

Tom

 

moderated Re: Preferred method to delete older version of Jaws?

 

Can you elaborate? You can install Jaws on a new system where no previous user files exist and all works as it should. What exactly do you mean by “lose MS Office ribbon functionality”?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard B. McDonald
Sent: Saturday, December 14, 2019 1:31 PM
To: main@jfw.groups.io
Subject: Re: Preferred method to delete older version of Jaws?

 

Further to the below, also retain “user settings.”  Else, you will lose MS Office ribbon functionality; which I learned the hard way.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Friday, December 13, 2019 5:32 PM
To: main@jfw.groups.io
Subject: Re: Preferred method to delete older version of Jaws?

 

I would use the Windows control panel, programs and features, and uninstall from there, but you probably should leave shared components.

 

 

 

Richard

"Reality is the leading cause of stress for those who are in touch with it." 

-- from The Search for Signs of Intelligent Life in the Universe, by Jane Wagner

 

 

On Dec 13, 2019, at 5:25 PM, David Pearson <dshawnpearson@...> wrote:

Hello:

Subject pretty much" says it all",  but what is the best procedure to remove an unwanted version of Jaws from my pc?

Thank you,



David S. Pearson

moderated Re: Do you have to go online in order to increase your dropbox storage size?

 

Hi Edward,

You are correct, I hadn't checked this in some time. But I am also 99.9% certain that this was not always the case and it is quite possible that Microsoft's competitive Office 365 option may have caused Dropbox to increase their plan from 1 to 2 Tb and of course storage continues to decrease in cost as well. Anyways, thanks for pointing this out, if somebody did need more than 1 Tb then Dropbox Plus or Dropbox Professional which apparently offers 3 Tb would be a good option.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Edward Green
Sent: Saturday, December 14, 2019 7:32 AM
To: main@jfw.groups.io
Subject: Re: Do you have to go online in order to increase your dropbox storage size?

Hi Sieghard,

You get 2TB on Dropbox's first tier payment plan not 1 as with OneDrive and Office 365.

Cheers,

Ed


On 14 Dec 2019, at 15:09, Sieghard Weitzel <@Sieghard> wrote:

You do and it is of course not free. I believe it is something like $100 a year.
You can get Office 365 for less than that for personal use and in addition to giving you a license for the full Office suite the subscription also includes 1 Tb of OneDrive storage which is what you get with Dropbox if you pay.
OneDrive works much like Dropbox and since I have the Office 365 subscription I certainly don't see any need to pay Dropbox as well. I still have my free account with I think 11 or 12Gb of storage, but only use it from time to time.

Regards,
Sieghard

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David
Ingram
Sent: Saturday, December 14, 2019 5:41 AM
To: main@jfw.groups.io
Subject: Do you have to go online in order to increase your dropbox storage size?

Hi list members, I've forgotten if I have to go online in order to increase my storage size for dropbox. Thank you for any information that you might have concerning this question.





moderated Re: table row number

tom x
 

Thanks for your reply and instructions George.

 

I have tried all of the steps on numerous occasions but still cannot get Jaws to read the row position in a table while using the latest version released only a few days ago.

 

However, if I change to the final copy of Jaws 19 then the row number is spoken as normal.  It appears to me that something has been broken in the latest 2020 version.

 

Cheers

Tom

 

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of george b
Sent: Saturday, 14 December 2019 10:13 PM
To: main@jfw.groups.io
Subject: Re: table row number

 

In a web page

Go to system settings with jaws key plus 6 on the number row

Tabe once and you hear users

Arrow once and you hear Web / HTML / PDFs

Arrow right once and you hear the same as above with open on the end

Arrow down to you hear tables and right arrow

Arrow down to you hear \\Tables\Web / HTML / PDFs \Table Presentation Information and then then press space bar and it changes to for all tables

Now quit the system settings and it will ask you if you wish to save the changes and choose yes and that should do it

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of tom x
Sent: December 13, 2019 22:06
To: main@jfw.groups.io
Subject: Re: table row number

 

Thanks for your reply George but cannot locate “internet” under the users heading or anywhere else for that matter.

 

Tables are mentioned under navigation but changing settings here does not seem to make any difference as far as I can tell.

 

Cheers

Tom

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of george b
Sent: Saturday, 14 December 2019 1:00 AM
To: main@jfw.groups.io
Subject: Re: table row number

 

Go to system settings with insert/jaws key and 6 on the number row

Choose defalt settings

Tab to you hear users and arrowdown to internet…, I do not remember the entire string but it is the only in the list which starts with interned, hit enter and arrow down to tables and hit enter, and arrown down once to

 Tables… and arrow right once and arrow down once to all

 

Close the system settings and it will ask you to save and choose yes

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of tom x
Sent: December 12, 2019 21:32
To: main@jfw.groups.io
Subject: table row number

 

Hi,

 

Prior to installing the latest Jaws 64 bit update a few days ago, Jaws would read the row position in a web based table as  I arrowed    up the column but since the update, Jaws no longer gives this information.

 

Can someone inform me which settings need to be changed so once more Jaws can give this info?

 

Thanks

 

Tom

 

moderated College Algrebra

HH. Smith Jr.
 

Hello fellow listerrs,

 

I am going to college in January of next year and I am wondering if anyone has any experience with algebra using JAWS. Any tricks and tips will be greatly appreciated.

 

Thx,

moderated Re: Do you have to go online in order to increase your drop box storage size?

paul lemm
 

Hi,

You can as someone mentioned upgrade to the drop box paid account, which if you use a lot of storage is really worthwhile as I think they give 2TB of storage space. If you just want to increase your drop box limit a little, another way to do this is using your drop box referral link. For everyone that uses your referral link to sign up you get an additional 500mb of extra storage (up to I think a maximum of 16gb of extra storage). It's also possible to purchase extra storage through services which get referrals for you, so you can get that extra 16gb of storage space for a one off payment of about $15 or so, although that’s not directly with drop box. Personally I've tried drop box, one drive and google drive, and although all work ok with jaws, I've always found drop box the easiest to use , especially since I have various folders I share with multiple other users and for project collaboration, plus I find the IOS app really nice and easy to access too. Too.

Paul

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Ingram
Sent: 14 December 2019 13:41
To: main@jfw.groups.io
Subject: Do you have to go online in order to increase your dropbox storage size?

Hi list members, I've forgotten if I have to go online in order to increase my storage size for dropbox. Thank you for any information that you might have concerning this question.

moderated Re: Openbook Question

Pastor Gil Pries
 

Hi Richard,

I followed your instructions and it works.

Thanks for your help.

Pastor Gil

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Saturday, December 14, 2019 2:36 PM
To: main@jfw.groups.io
Subject: Re: Openbook Question

 

Well, here are the steps I use.

I open the settings menu, alt+g

I arrow down to workflow.

I set the acquire settings I want, in my case, acquire in background, etc.

Then, control+tab to the process tab.

Make sure Exact view is checked.

Hit OK.

Then alt+g and arrow to save settings.

Select default and say yes when it asked if you want to overwrite it.

Then, when I open Openbook again, that settings is saved.

I of course, skipped a whole lot of settings, but since the exact view is the main one you are focused on, I went with a shorter explanation.

 

HTH,

 

Richard

 

🖖 Live long and prosper

 

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Pastor Gil Pries
Sent: Saturday, December 14, 2019 2:30 PM
To: main@jfw.groups.io
Subject: Re: Openbook Question

 

Hi Richard,

I am saving them to the default settings, and I put it on Exact view.

What else do I need to do and how do I do it?

This program is brand new to me.

 

Pastor Gil

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Saturday, December 14, 2019 2:26 PM
To: main@jfw.groups.io
Subject: Re: Openbook Question

 

Under the Settings menu, are you saving the settings with that dialog and saving it to your default settings, or giving it another name?

Also, did you adjust the Workflow, Process tab before saving the settings?

 

My settings always hold with exact view.

 

 

 

Richard

 

🖖 Live long and prosper

 

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Pastor Gil Pries
Sent: Saturday, December 14, 2019 1:55 PM
To: main@jfw.groups.io
Subject: Openbook Question

 

Using Openbook 9.0.

When I set the view to exact view, and save the setttings, when I exit Openbook, it defaults to text view again.

Is there any way to save the view settings?

 

Pastor Gil

moderated Re: Openbook Question

Richard Turner
 

Well, here are the steps I use.

I open the settings menu, alt+g

I arrow down to workflow.

I set the acquire settings I want, in my case, acquire in background, etc.

Then, control+tab to the process tab.

Make sure Exact view is checked.

Hit OK.

Then alt+g and arrow to save settings.

Select default and say yes when it asked if you want to overwrite it.

Then, when I open Openbook again, that settings is saved.

I of course, skipped a whole lot of settings, but since the exact view is the main one you are focused on, I went with a shorter explanation.

 

HTH,

 

Richard

 

🖖 Live long and prosper

 

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Pastor Gil Pries
Sent: Saturday, December 14, 2019 2:30 PM
To: main@jfw.groups.io
Subject: Re: Openbook Question

 

Hi Richard,

I am saving them to the default settings, and I put it on Exact view.

What else do I need to do and how do I do it?

This program is brand new to me.

 

Pastor Gil

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Saturday, December 14, 2019 2:26 PM
To: main@jfw.groups.io
Subject: Re: Openbook Question

 

Under the Settings menu, are you saving the settings with that dialog and saving it to your default settings, or giving it another name?

Also, did you adjust the Workflow, Process tab before saving the settings?

 

My settings always hold with exact view.

 

 

 

Richard

 

🖖 Live long and prosper

 

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Pastor Gil Pries
Sent: Saturday, December 14, 2019 1:55 PM
To: main@jfw.groups.io
Subject: Openbook Question

 

Using Openbook 9.0.

When I set the view to exact view, and save the setttings, when I exit Openbook, it defaults to text view again.

Is there any way to save the view settings?

 

Pastor Gil

moderated Re: Openbook Question

Pastor Gil Pries
 

Hi Richard,

I am saving them to the default settings, and I put it on Exact view.

What else do I need to do and how do I do it?

This program is brand new to me.

 

Pastor Gil

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Saturday, December 14, 2019 2:26 PM
To: main@jfw.groups.io
Subject: Re: Openbook Question

 

Under the Settings menu, are you saving the settings with that dialog and saving it to your default settings, or giving it another name?

Also, did you adjust the Workflow, Process tab before saving the settings?

 

My settings always hold with exact view.

 

 

 

Richard

 

🖖 Live long and prosper

 

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Pastor Gil Pries
Sent: Saturday, December 14, 2019 1:55 PM
To: main@jfw.groups.io
Subject: Openbook Question

 

Using Openbook 9.0.

When I set the view to exact view, and save the setttings, when I exit Openbook, it defaults to text view again.

Is there any way to save the view settings?

 

Pastor Gil

moderated Re: Openbook Question

Richard Turner
 

Under the Settings menu, are you saving the settings with that dialog and saving it to your default settings, or giving it another name?

Also, did you adjust the Workflow, Process tab before saving the settings?

 

My settings always hold with exact view.

 

 

 

Richard

 

🖖 Live long and prosper

 

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Pastor Gil Pries
Sent: Saturday, December 14, 2019 1:55 PM
To: main@jfw.groups.io
Subject: Openbook Question

 

Using Openbook 9.0.

When I set the view to exact view, and save the setttings, when I exit Openbook, it defaults to text view again.

Is there any way to save the view settings?

 

Pastor Gil

moderated Openbook Question

Pastor Gil Pries
 

Using Openbook 9.0.

When I set the view to exact view, and save the setttings, when I exit Openbook, it defaults to text view again.

Is there any way to save the view settings?

 

Pastor Gil

moderated Re: saving documents in Word

Pastor Gil Pries
 

I use f 12 and it defaults to my documents.

 

Pastor Gil

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Saturday, December 14, 2019 1:06 PM
To: main@jfw.groups.io
Subject: Re: saving documents in Word

 

Hi,

  I am not, at the moment, sure of where the setting is that can fix this.  It occurs because of One Drive and Office 365.  My workaround is I hit F12 and save as another document with a different file name.  Also, I do not use AutoSave function.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Saturday, December 14, 2019 1:48 PM
To: main@jfw.groups.io
Subject: Re: saving documents in Word

 

You might want to check the saving options you have by hitting alt+f, then t, and arrow down to saving and tab through there.

I’m not sure what would cause your issue, I always get prompted to save my changes.

.

 

 

Richard

 

🖖 Live long and prosper

 

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of CJ &AA MAY
Sent: Saturday, December 14, 2019 8:59 AM
To: main@jfw.groups.io
Subject: Re: saving documents in Word

 

I am using Jaws 18 with Windows 10 and Office 365.

Until relatively recently, when closing a document in MS Word with alt f4 or control f4, if I’d made changes, I would be asked if I wanted to save the changes before closing. But now it just closes and saves.

Today this was a real nuisance as I’d slightly customised my Christmas letter for an individual, but I hadn’t intended this to change the original letter which still needs to go out to some people. When I closed it though, it didn’t ask if I wanted to save the changes – it just did so!

How in future can I prevent this from happening?

Alison

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
Sent: 06 December 2019 02:08
To: JFW List <main@jfw.groups.io>
Subject: New FS Blog: Three Reasons to Use Google’s Webmail Option with JAWS

 

 

 

WordPress.com

 

New post on Freedom Scientific Blog

Three Reasons to Use Google’s Webmail Option with JAWS
by
Elizabeth Whitaker

 

Gmail is a widely-used email service that is used at home,
work, and school. While it can be accessed through a desktop email application
such as Microsoft Outlook, its webmail option provides more versatility.

 

Google’s webmail option provides Gmail users a flexible
alternative for accessing email from computers and mobile devices. A web
browser and Internet connection are all you need to begin sending and receiving
messages.

 

When you access Gmail through this form of internet-based
email, messages are stored on a web server, rather than on your computer or
device. This frees up disk space and memory for other important files. Here are
three reasons to consider choosing Google’s webmail option when accessing Gmail
with JAWS.

 

Access Your Email from Anywhere

 

When using Google’s webmail option, you can access messages
from anywhere on any computer or mobile device. This is especially convenient
if you travel frequently or need to access email between appointments. Because
your email is all on the cloud, you can also search for and respond to messages
quickly and efficiently without accessing a dedicated computer or software.

 

No Additional Software Is Required

 

Webmail doesn’t require the installation of dedicated
software. Simply open your web browser, go to Gmail, and your messages will be
displayed.

 

Access Your Email Using Familiar JAWS and Web Page Navigation Commands

 

Since Google’s webmail is displayed in your web browser, you
can use JAWS Quick Nav keys and other navigation keystrokes when working with
messages. These familiar commands make learning easier.

 

Want to get the most out of accessing Gmail? Check out our
instructional tutorial,
Gmail and JAWS
 today. You’ll learn how to compose a new email, read messages, search
your inbox, and much more.

 

Download the MP4 or stream the MP3, plus use the included
resources to supplement your learning experience.

 

Elizabeth Whitaker
 | December 5, 2019 at 7:38 pm | Tags:


Take care.  Mike.  Sent from my iBarstool.  Go Rams!
Arguing with a woman is like reading a software license agreement.  In the end you have to ignore everything, & click I agree.

moderated Re: Preferred method to delete older version of Jaws?

Richard B. McDonald
 

Further to the below, also retain “user settings.”  Else, you will lose MS Office ribbon functionality; which I learned the hard way.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Friday, December 13, 2019 5:32 PM
To: main@jfw.groups.io
Subject: Re: Preferred method to delete older version of Jaws?

 

I would use the Windows control panel, programs and features, and uninstall from there, but you probably should leave shared components.

 

 

 

Richard

"Reality is the leading cause of stress for those who are in touch with it." 

-- from The Search for Signs of Intelligent Life in the Universe, by Jane Wagner

 



On Dec 13, 2019, at 5:25 PM, David Pearson <dshawnpearson@...> wrote:

Hello:

Subject pretty much" says it all",  but what is the best procedure to remove an unwanted version of Jaws from my pc?

Thank you,



David S. Pearson


moderated Re: saving documents in Word

Dan Longmore
 

Hi,

  I am not, at the moment, sure of where the setting is that can fix this.  It occurs because of One Drive and Office 365.  My workaround is I hit F12 and save as another document with a different file name.  Also, I do not use AutoSave function.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Saturday, December 14, 2019 1:48 PM
To: main@jfw.groups.io
Subject: Re: saving documents in Word

 

You might want to check the saving options you have by hitting alt+f, then t, and arrow down to saving and tab through there.

I’m not sure what would cause your issue, I always get prompted to save my changes.

.

 

 

Richard

 

🖖 Live long and prosper

 

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of CJ &AA MAY
Sent: Saturday, December 14, 2019 8:59 AM
To: main@jfw.groups.io
Subject: Re: saving documents in Word

 

I am using Jaws 18 with Windows 10 and Office 365.

Until relatively recently, when closing a document in MS Word with alt f4 or control f4, if I’d made changes, I would be asked if I wanted to save the changes before closing. But now it just closes and saves.

Today this was a real nuisance as I’d slightly customised my Christmas letter for an individual, but I hadn’t intended this to change the original letter which still needs to go out to some people. When I closed it though, it didn’t ask if I wanted to save the changes – it just did so!

How in future can I prevent this from happening?

Alison

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
Sent: 06 December 2019 02:08
To: JFW List <main@jfw.groups.io>
Subject: New FS Blog: Three Reasons to Use Google’s Webmail Option with JAWS

 

 

 

WordPress.com

 

New post on Freedom Scientific Blog

Three Reasons to Use Google’s Webmail Option with JAWS
by
Elizabeth Whitaker

 

Gmail is a widely-used email service that is used at home,
work, and school. While it can be accessed through a desktop email application
such as Microsoft Outlook, its webmail option provides more versatility.

 

Google’s webmail option provides Gmail users a flexible
alternative for accessing email from computers and mobile devices. A web
browser and Internet connection are all you need to begin sending and receiving
messages.

 

When you access Gmail through this form of internet-based
email, messages are stored on a web server, rather than on your computer or
device. This frees up disk space and memory for other important files. Here are
three reasons to consider choosing Google’s webmail option when accessing Gmail
with JAWS.

 

Access Your Email from Anywhere

 

When using Google’s webmail option, you can access messages
from anywhere on any computer or mobile device. This is especially convenient
if you travel frequently or need to access email between appointments. Because
your email is all on the cloud, you can also search for and respond to messages
quickly and efficiently without accessing a dedicated computer or software.

 

No Additional Software Is Required

 

Webmail doesn’t require the installation of dedicated
software. Simply open your web browser, go to Gmail, and your messages will be
displayed.

 

Access Your Email Using Familiar JAWS and Web Page Navigation Commands

 

Since Google’s webmail is displayed in your web browser, you
can use JAWS Quick Nav keys and other navigation keystrokes when working with
messages. These familiar commands make learning easier.

 

Want to get the most out of accessing Gmail? Check out our
instructional tutorial,
Gmail and JAWS
 today. You’ll learn how to compose a new email, read messages, search
your inbox, and much more.

 

Download the MP4 or stream the MP3, plus use the included
resources to supplement your learning experience.

 

Elizabeth Whitaker
 | December 5, 2019 at 7:38 pm | Tags:


Take care.  Mike.  Sent from my iBarstool.  Go Rams!
Arguing with a woman is like reading a software license agreement.  In the end you have to ignore everything, & click I agree.