moderated Re: Need help with an Excel formula

Marty Hutchings

I would need to know your columb titles before I could help you.  I also use Excel for bank ledgers, but your formula is a little different than mine.

Love in Christ
Marty
For our struggle is not against flesh and blood, but against the rulers, against the powers, against the world forces of this darkness, against the spiritual forces of wickedness in the heavenly places.
Therefore, take up the full armor of God, so that you will be able to resist in the evil day, and having done everything, to stand firm.
Ephesians 6:12, 13

Sent: Sunday, September 15, 2019 2:11 PM
Subject: Need help with an Excel formula

Hi Listers,

First, I do not fully know how to use Excel like many of you who probably use it for work. But I do use it for keeping our Writers Club’s roster and my bank account spread sheets. I used to have a formula that I could use in keeping a spread sheet of my bank debits and deposits—balancing my account. The formula I was given was =(E3-D3)+F2 and it helped me keep account of the totals when putting in debits and credits. Used to work great. Now, however, when I start a new monthly spread sheet, I get a message that the formula I key in is an error. I don’t know if something has gotten erased from the formula I had in my original file, or if the formulas have changed over time. Otherwise, I have no need to learn Excel. Can someone just please help me with this formula or tell me what might be wrong?

Thank you.

Shirley

moderated Re: Need help with an Excel formula

Glenn / Lenny

﻿
Hi Shirley,
I find it easiest to just copy the contents of the cell with the formula and pasting it elsewhere.
So I would have both spread sheets open, and go to the cell where the formula works, and do control + C to copy, and control + tab to the other spreadsheet and move to where you want the formula, and paste it with control + V.
HTH.
Glenn

----- Original Message -----
Sent: Sunday, September 15, 2019 2:11 PM
Subject: Need help with an Excel formula

Hi Listers,

First, I do not fully know how to use Excel like many of you who probably use it for work. But I do use it for keeping our Writers Club’s roster and my bank account spread sheets. I used to have a formula that I could use in keeping a spread sheet of my bank debits and deposits—balancing my account. The formula I was given was =(E3-D3)+F2 and it helped me keep account of the totals when putting in debits and credits. Used to work great. Now, however, when I start a new monthly spread sheet, I get a message that the formula I key in is an error. I don’t know if something has gotten erased from the formula I had in my original file, or if the formulas have changed over time. Otherwise, I have no need to learn Excel. Can someone just please help me with this formula or tell me what might be wrong?

Thank you.

Shirley

moderated Need help with an Excel formula

Shirley Tracy

Hi Listers,

First, I do not fully know how to use Excel like many of you who probably use it for work. But I do use it for keeping our Writers Club’s roster and my bank account spread sheets. I used to have a formula that I could use in keeping a spread sheet of my bank debits and deposits—balancing my account. The formula I was given was =(E3-D3)+F2 and it helped me keep account of the totals when putting in debits and credits. Used to work great. Now, however, when I start a new monthly spread sheet, I get a message that the formula I key in is an error. I don’t know if something has gotten erased from the formula I had in my original file, or if the formulas have changed over time. Otherwise, I have no need to learn Excel. Can someone just please help me with this formula or tell me what might be wrong?

Thank you.

Shirley

moderated Re: Absolutely Essential Information to Share When You Have an Issue and How to Get It

David Diamond

True however, some don’t know those things so it is good you provided steps to do that.  Like I said, it is a symbiotic relationship. When someone calls me, often they just say, “My dog has issues.”  It is up to me to assess by asking the correct questions what those issues are.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Vogel
Sent: September 15, 2019 11:30 AM
To: main@jfw.groups.io
Subject: Re: Absolutely Essential Information to Share When You Have an Issue and How to Get It

On Sun, Sep 15, 2019 at 12:27 PM, David Diamond wrote:

So it’s up to the doctor to ask the right questions. It is, a symbiotic relationship.

Indeed, but OS Version, Screen Reader Version, and specific software version are the patient's responsibility, and the rough equivalent of Name, Address, and Phone Number.

It needs to be automatically provided, not pried out each and every time.

--

Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362

Many of the insights of the saint stem from his experience as a sinner.

~ Eric Hoffer

moderated Re: Absolutely Essential Information to Share When You Have an Issue and How to Get It

On Sun, Sep 15, 2019 at 12:27 PM, David Diamond wrote:
So it’s up to the doctor to ask the right questions. It is, a symbiotic relationship.
Indeed, but OS Version, Screen Reader Version, and specific software version are the patient's responsibility, and the rough equivalent of Name, Address, and Phone Number.

It needs to be automatically provided, not pried out each and every time.

--

Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362

Many of the insights of the saint stem from his experience as a sinner.

~ Eric Hoffer

moderated Re: getting rid of inline objects in word

JM Casey

Haha..I wouldn’t have said anything, except seeing “carrot” there really cracked me up. I use a braille display more than speech nowadays so these things just jump out at me more.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kimsan via Groups.Io
Sent: September 15, 2019 2:27 AM
To: main@jfw.groups.io
Subject: Re: getting rid of inline objects in word

Jm Casey,

Lmao, my bad. I just went with the first spell check suggestion.

Best regards,

Kimsan Song

kimsansong@...

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Saturday, September 14, 2019 11:16 AM
To: main@jfw.groups.io
Subject: Re: getting rid of inline objects in word

Hey. Glad that method worked for you. It didn’t exactly work for me when I tried it last, but that was a large document OCRed by Adobe Aacrobat and converted to  a word document. There may have been all sorts of weird issues with it.

BTW, it’s “caret”, not “carrot”, the vegetable. 8grins*

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kimsan via Groups.Io
Sent: September 13, 2019 4:50 PM
To: main@jfw.groups.io
Subject: Re: getting rid of inline objects in word

Hi,

CTRL h for find and replace, type carrot g, in the next box leave it empty, then hit replace all.

All gone.

Best regards,

Kimsan Song

kimsansong@...

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kimsan via Groups.Io
Sent: Thursday, September 12, 2019 9:08 AM
To: 'jfw' <jfw@groups.io>
Subject: getting rid of inline objects in word

Hi,

Jaws 2019, windows 10 pro latest and word 2016.

I press CTRL shift o, there are 218 inline objects, I thought by selecting all with CTRL a and tapping delete would do the trick, but to no avail.

How can I quickly remove these?

Thank you,

Sincerely,

Kimsan Song

kimsansong@...

moderated Re: Scanning a document in K1000 and Open Book

Ann Byrne

The OpenBook setting doesn't really maintain the format despite what it says. If I needed something exact, I would go with a commercial program like Abbyy fine reader or Prismo. Or even the native ocr package that comes with your scanner.
or At 11:26 AM 9/15/2019, you wrote:

IN Openbook, there is an exact view setting that tries to maintain the original format.
So depending on if you want it to maintain columns or not, there is another setting for that.
I don't have it installed right now so I can't check.

Richard

ðŸ­­ Live long and prosper

Check out my web site at: www.turner42.com

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Sunday, September 15, 2019 9:24 AM
To: main@jfw.groups.io
Subject: Re: Scanning a document in K1000 and Open Book

a slight correction and some other info:

when pressing numpad 6, make sure the numpad is set to the reading keypad (insert+numpad - (it's a toggle that cycles)). to save the configuration, press alt+t and then v and enter if there's only the default configuration. you can setup (I don't know if there's a limit) custom configurations taylored to your needs. you can switch to a custom configuration manually after starting K1000 (alt+t and then l, arrow to the configuration name and enter). I don't know if there's a way to automatically load a custom configuration instead of K1000 starting with the default configuration.

-------- Original Message --------
From: Mario [mailto:mrb620@hotmail.com]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Sunday, September 15, 2019, 11:59 AM
Subject: Scanning a document in K1000 and Open Book in K1000, numpad 6 will toggle between column identification between being enabled or disabled. toggle it to disabled. if you want, don't forget to save the configuration so the setting persists.

-------- Original Message --------
From: tom x [mailto:ballistic719@outlook.com]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Saturday, September 14, 2019, 5:26 AM
Subject: Scanning a document in K1000 and Open Book Hi,

Does anyone know if there is a setting which can be altered in the latest versions of either K1000 or Open Book so that the display on the screenor the saved document matches the layout of the original material?

I need to scan some technical material and have the result match the layout of the original document.Currently the lines are joined and all over the place which is vastly different from the original document.

Can anyone help?

Thanks

Tom

.

moderated Re: Does the latest ITuneds work with JFW 2019?

Glenn / Lenny

﻿
You will want to take the quotes out of this.
Also, mine work better if I keep the M3U file in the same folder as the music and remove the part of the path of each song up to the folder where the music folders are.
Glenn

----- Original Message -----
Sent: Sunday, September 15, 2019 10:58 AM
Subject: Re: Does the latest ITuneds work with JFW 2019?

Is there an m3u file?

Or is that just too old school.  Windows Media used to use m3u files to run the playlist.

I just do them on my iPhone, so probably out to lunch here.

Richard

🖖 Live long and prosper

Check out my web site at: www.turner42.com

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Griffith
Sent: Saturday, September 14, 2019 4:05 AM
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

I have tried this and it does not work for me.

It produces an error message no matter what media player I use, VLC Groove Music etc.

Below is the contents of the m3u file I created.

Can anybody tell me why it does not work?

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\01 - Eat For Two.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\02 - Please Forgive Us.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\03 - The Big Parade.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\04 - Trouble Me.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\05 - You Happy Puppet.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\06 - Headstrong.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\07 - Poison In The Well.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\08 - Dust Bowl.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\09 - The Lion's Share.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\10 - Hateful Hate.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\11 - Jubilee.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\AlbumArt_{04A56B10-1DCC-451B-A74C-9C3E22E60628}_Large.jpg"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\AlbumArt_{04A56B10-1DCC-451B-A74C-9C3E22E60628}_Small.jpg"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\AlbumArtSmall.jpg"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\Folder.jpg"

Sent from Mail for Windows 10

From: Glenn / Lenny
Sent: 14 September 2019 01:32
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

I find it pretty easy to make a playlist using NotePad and copying the path of the files I want in the playlist.

Shift + applications then the letter A copies the full path of the file for the playlist and then I paste that in NotePad.

I actually use control + space bar for all the files in a folder before doing the copy path command, so I can copy the path of a bunch of files at once.

Then when I'm done and save the TXT file, I exit NotePad and rename the file extension from TXT to M3U.

Glenn

----- Original Message -----

From:

Sent: Friday, September 13, 2019 7:24 PM

Subject: Re: Does the latest ITuneds work with JFW 2019?

Kevin,  I use Winamp all of the time and I have created lots of play lists with it.  It is totally keyboard accessible.

Love in Christ
Marty
For our struggle is not against flesh and blood, but against the rulers, against the powers, against the world forces of this darkness, against the spiritual forces of wickedness in the heavenly places.
Therefore, take up the full armor of God, so that you will be able to resist in the evil day, and having done everything, to stand firm.
Ephesians 6:12, 13

From:

Sent: Friday, September 13, 2019 5:56 PM

Subject: Re: Does the latest ITuneds work with JFW 2019?

Does Winamp or Groove allow one to create playlists?

From: main@jfw.groups.io <main@JFW.groups.io> On Behalf Of Jaffar Sidek
Sent: Friday, September 13, 2019 5:24 PM
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

Hi. I wouldn't wish ITune for Windows on my worst enemy.  Stick to Winamp or Groove Music or Windows Media player even and they should do a more then adequate job of allowing you to organize your music collection.  ITunes is excellent on the mac, but  a horror on windows.  Cheers!

On 9/14/2019 2:07 AM, Kevin Meyers wrote:

I started to use ITunes with Jaws 2019 and doesn’t work to well. I have a hard time with the playlists I created to show. Then when I navigate around eventually a certain playlist shows. At least I thought it did. Then I press enter on the play button and it plays a song in a different playlist. Is there a way to change something in Jaws settings or ITune settings to get it to work better?

From: main@jfw.groups.io mailto:main@jfw.groups.io On Behalf Of Richard Turner
Sent: Friday, September 13, 2019 12:34 PM
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

It isn't any worse.

What areas are you most concerned with?

Richard

Always look out for #1, and be careful not to step in #2.

On Sep 13, 2019, at 9:10 AM, Ralph Supernaw <rhs@...> wrote:

﻿

Hi,

I have been putting off letting ITunes update to the latest version.  Before I do I thought I’d find out if I will regret it.

Thanks.

moderated Re: Absolutely Essential Information to Share When You Have an Issue and How to Get It

David Diamond

Brian, excellent point. It should be noted however on a broad aspect of things that a computer tech it’s like a doctor. Sometimes the patient comes but they don’t know what the problem is. So it’s up to the doctor to ask the right questions. It is, a symbiotic relationship.

moderated Re: Scanning a document in K1000 and Open Book

Richard Turner

IN Openbook, there is an exact view setting that tries to maintain the original format.
So depending on if you want it to maintain columns or not, there is another setting for that.
I don't have it installed right now so I can't check.

Richard

🖖 Live long and prosper

Check out my web site at: www.turner42.com

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Sunday, September 15, 2019 9:24 AM
To: main@jfw.groups.io
Subject: Re: Scanning a document in K1000 and Open Book

a slight correction and some other info:

when pressing numpad 6, make sure the numpad is set to the reading keypad (insert+numpad - (it's a toggle that cycles)). to save the configuration, press alt+t and then v and enter if there's only the default configuration. you can setup (I don't know if there's a limit) custom configurations taylored to your needs. you can switch to a custom configuration manually after starting K1000 (alt+t and then l, arrow to the configuration name and enter). I don't know if there's a way to automatically load a custom configuration instead of K1000 starting with the default configuration.

-------- Original Message --------
From: Mario [mailto:mrb620@hotmail.com]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Sunday, September 15, 2019, 11:59 AM
Subject: Scanning a document in K1000 and Open Book in K1000, numpad 6 will toggle between column identification between being enabled or disabled. toggle it to disabled. if you want, don't forget to save the configuration so the setting persists.

-------- Original Message --------
From: tom x [mailto:ballistic719@outlook.com]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Saturday, September 14, 2019, 5:26 AM
Subject: Scanning a document in K1000 and Open Book Hi,

Does anyone know if there is a setting which can be altered in the latest versions of either K1000 or Open Book so that the display on the screenor the saved document matches the layout of the original material?

I need to scan some technical material and have the result match the layout of the original document.Currently the lines are joined and all over the place which is vastly different from the original document.

Can anyone help?

Thanks

Tom

.

moderated Re: Scanning a document in K1000 and Open Book

Mario

a slight correction and some other info:

configuration, press alt+t and then v and enter if there's only the
default configuration. you can setup (I don't know if there's a limit)
custom configurations taylored to your needs. you can switch to a custom
configuration manually after starting K1000 (alt+t and then l, arrow to
the configuration name and enter). I don't know if there's a way to
the default configuration.

-------- Original Message --------
From: Mario [mailto:mrb620@hotmail.com]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Sunday, September 15, 2019, 11:59 AM
Subject: Scanning a document in K1000 and Open Book
in K1000, numpad 6 will toggle between column identification between
being enabled or disabled. toggle it to disabled. if you want, don't
forget to save the configuration so the setting persists.

-------- Original Message --------
From: tom x [mailto:ballistic719@outlook.com]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Saturday, September 14, 2019, 5:26 AM
Subject: Scanning a document in K1000 and Open Book
Hi,

Does anyone know if there is a setting which can be altered in the
latest versions of either K1000 or Open Book so that the display on the
screenor the saved document matches the layout of the original material?

I need to scan some technical material and have the result match the
layout of the original document.Currently the lines are joined and all
over the place which is vastly different from the original document.

Can anyone help?

Thanks

Tom

.

moderated Re: Scanning a document in K1000 and Open Book

Mario

in K1000, numpad 6 will toggle between column identification between
being enabled or disabled. toggle it to disabled. if you want, don't
forget to save the configuration so the setting persists.

-------- Original Message --------
From: tom x [mailto:ballistic719@outlook.com]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Saturday, September 14, 2019, 5:26 AM
Subject: Scanning a document in K1000 and Open Book
Hi,

Does anyone know if there is a setting which can be altered in the
latest versions of either K1000 or Open Book so that the display on the
screenor the saved document matches the layout of the original material?

I need to scan some technical material and have the result match the
layout of the original document.Currently the lines are joined and all
over the place which is vastly different from the original document.

Can anyone help?

Thanks

Tom

moderated Re: Does the latest ITuneds work with JFW 2019?

Richard Turner

Is there an m3u file?

Or is that just too old school.  Windows Media used to use m3u files to run the playlist.

I just do them on my iPhone, so probably out to lunch here.

Richard

🖖 Live long and prosper

Check out my web site at: www.turner42.com

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Griffith
Sent: Saturday, September 14, 2019 4:05 AM
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

I have tried this and it does not work for me.

It produces an error message no matter what media player I use, VLC Groove Music etc.

Below is the contents of the m3u file I created.

Can anybody tell me why it does not work?

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\01 - Eat For Two.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\02 - Please Forgive Us.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\03 - The Big Parade.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\04 - Trouble Me.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\05 - You Happy Puppet.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\06 - Headstrong.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\07 - Poison In The Well.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\08 - Dust Bowl.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\09 - The Lion's Share.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\10 - Hateful Hate.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\11 - Jubilee.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\AlbumArt_{04A56B10-1DCC-451B-A74C-9C3E22E60628}_Large.jpg"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\AlbumArt_{04A56B10-1DCC-451B-A74C-9C3E22E60628}_Small.jpg"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\AlbumArtSmall.jpg"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\Folder.jpg"

Sent from Mail for Windows 10

From: Glenn / Lenny
Sent: 14 September 2019 01:32
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

I find it pretty easy to make a playlist using NotePad and copying the path of the files I want in the playlist.

Shift + applications then the letter A copies the full path of the file for the playlist and then I paste that in NotePad.

I actually use control + space bar for all the files in a folder before doing the copy path command, so I can copy the path of a bunch of files at once.

Then when I'm done and save the TXT file, I exit NotePad and rename the file extension from TXT to M3U.

Glenn

----- Original Message -----

From:

Sent: Friday, September 13, 2019 7:24 PM

Subject: Re: Does the latest ITuneds work with JFW 2019?

Kevin,  I use Winamp all of the time and I have created lots of play lists with it.  It is totally keyboard accessible.

Love in Christ
Marty
For our struggle is not against flesh and blood, but against the rulers, against the powers, against the world forces of this darkness, against the spiritual forces of wickedness in the heavenly places.
Therefore, take up the full armor of God, so that you will be able to resist in the evil day, and having done everything, to stand firm.
Ephesians 6:12, 13

From:

Sent: Friday, September 13, 2019 5:56 PM

Subject: Re: Does the latest ITuneds work with JFW 2019?

Does Winamp or Groove allow one to create playlists?

From: main@jfw.groups.io <main@JFW.groups.io> On Behalf Of Jaffar Sidek
Sent: Friday, September 13, 2019 5:24 PM
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

Hi. I wouldn't wish ITune for Windows on my worst enemy.  Stick to Winamp or Groove Music or Windows Media player even and they should do a more then adequate job of allowing you to organize your music collection.  ITunes is excellent on the mac, but  a horror on windows.  Cheers!

On 9/14/2019 2:07 AM, Kevin Meyers wrote:

I started to use ITunes with Jaws 2019 and doesn’t work to well. I have a hard time with the playlists I created to show. Then when I navigate around eventually a certain playlist shows. At least I thought it did. Then I press enter on the play button and it plays a song in a different playlist. Is there a way to change something in Jaws settings or ITune settings to get it to work better?

From: main@jfw.groups.io mailto:main@jfw.groups.io On Behalf Of Richard Turner
Sent: Friday, September 13, 2019 12:34 PM
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

It isn't any worse.

What areas are you most concerned with?

Richard

Always look out for #1, and be careful not to step in #2.

On Sep 13, 2019, at 9:10 AM, Ralph Supernaw <rhs@...> wrote:

﻿

Hi,

I have been putting off letting ITunes update to the latest version.  Before I do I thought I’d find out if I will regret it.

Thanks.

moderated Re: getting rid of inline objects in word

Kimsan <kimsansong@...>

Jm Casey,

Lmao, my bad. I just went with the first spell check suggestion.

Best regards,

Kimsan Song

kimsansong@...

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Saturday, September 14, 2019 11:16 AM
To: main@jfw.groups.io
Subject: Re: getting rid of inline objects in word

Hey. Glad that method worked for you. It didn’t exactly work for me when I tried it last, but that was a large document OCRed by Adobe Aacrobat and converted to  a word document. There may have been all sorts of weird issues with it.

BTW, it’s “caret”, not “carrot”, the vegetable. 8grins*

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kimsan via Groups.Io
Sent: September 13, 2019 4:50 PM
To: main@jfw.groups.io
Subject: Re: getting rid of inline objects in word

Hi,

CTRL h for find and replace, type carrot g, in the next box leave it empty, then hit replace all.

All gone.

Best regards,

Kimsan Song

kimsansong@...

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kimsan via Groups.Io
Sent: Thursday, September 12, 2019 9:08 AM
To: 'jfw' <jfw@groups.io>
Subject: getting rid of inline objects in word

Hi,

Jaws 2019, windows 10 pro latest and word 2016.

I press CTRL shift o, there are 218 inline objects, I thought by selecting all with CTRL a and tapping delete would do the trick, but to no avail.

How can I quickly remove these?

Thank you,

Sincerely,

Kimsan Song

kimsansong@...

moderated Re: Does the latest ITuneds work with JFW 2019?

David Griffith

It is a little fiddly to get iTunes into Songs view as iTunes can be pretty laggy and you might have to tab to get to the sort order where you should hear albums if it in default view.

Try  tab and shift tab in the library sidebar view table until you hear album. As soon as you hear album then try pressing the down arrow to change this to songs.

If your iTunes is slow it may take a little time to respond. Keep on pressing jaws up arrow to check where you are.

It really does work but if your iTunes is laggy then as I say it is a little fiddly.

Once in songs view then pressing control B should turn column browser on. You should then in the view menu find there is a column browser menu item which will allow you to customise the column browser – decide for example if you want the Genre column set.

It might be  also be  worth checking you have full keyboard navigation set in your iTunes preferences. There is more information on this and the Column Browser on

https://support.apple.com/en-gb/guide/itunes/itns1019/windows

In terms of accessing your iTunes music with VLC this is straightforward.

1. Find your iTunes Media folder which is normally in your Music folder, under iTunes media there will be a music folder and in there you should find all your downloaded iTunes music.
2. If your music is not there you need to download it. In column browser navigayte down the artist column, first letter navigation should work, then tab across to the relevant album, and then finally tab across to the songs column. Press control a to select all songs, then press the application key and w  to download all the songs in the album. You will find the music in iTunes Media Music artist name then album name and finally the songs in m4a format which VLc will play happily.
3. David Griffiththe the artist

youu

Sent from Mail for Windows 10

From: Kevin Meyers
Sent: 14 September 2019 16:02
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

After you purchased songs using Itunes, how do you get VLC to see the songs? What version of Itunes are you using? I have the most recent version and navigating is nearly impossible. I couldn’t find what you suggested below. Thanks, Kevinthem

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Griffith
Sent: Friday, September 13, 2019 4:54 PM
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

I must admit I don’t use  playlist at all with iTunes but for standard album playing the normal iTunes advice for use with screenreaders is to change the default album view to songs  view in the sidebar table.

You can then enable column browser which will sort  and organise your iTunes library into easy columns of artist albums and songs, and Genres also it you wish though I normally disable this particular column.

Column browser view is only available once songs view has been enabled.

Whether this helps with playlists I am not sure.

Basically I use iTunes as a shop and for iTunes Match and little else, preferring to use VLC for my actual music playing.

David Griffith.

Sent from Mail for Windows 10

From: Kevin Meyers
Sent: 13 September 2019 19:07
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

I started to use Itunes with Jaws 2019 and doesn’t work to well. I have a hard time with the playlists I created to show. Then when I navigate around eventualy a certain playlist shows. At least I thought it did. Then I press enter on the play button and it plays a song in a different playlist. Is there a way to change something in Jaws settings or Itune settings to get it to work better?

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Friday, September 13, 2019 12:34 PM
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

It isn't any worse.

What areas are you most concerned with?

Richard

Always look out for #1, and be careful not to step in #2.

On Sep 13, 2019, at 9:10 AM, Ralph Supernaw <rhs@...> wrote:

﻿

Hi,

I have been putting off letting ITunes update to the latest version.  Before I do I thought I’d find out if I will regret it.

Thanks.

moderated Reading a switchboard in Access

Ann Byrne

I remember tabbing through the buttons on an Access switchboard with JAWS. Today with JAWS2019 I can't move the cursor at all. Is there still a way to read a switchboard in Access???

Thanks,

moderated Re: Does the latest ITuneds work with JFW 2019?

David Griffith

I have tried this and it does not work for me.

It produces an error message no matter what media player I use, VLC Groove Music etc.

Below is the contents of the m3u file I created.

Can anybody tell me why it does not work?

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\01 - Eat For Two.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\02 - Please Forgive Us.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\03 - The Big Parade.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\04 - Trouble Me.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\05 - You Happy Puppet.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\06 - Headstrong.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\07 - Poison In The Well.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\08 - Dust Bowl.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\09 - The Lion's Share.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\10 - Hateful Hate.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\11 - Jubilee.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\AlbumArt_{04A56B10-1DCC-451B-A74C-9C3E22E60628}_Large.jpg"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\AlbumArt_{04A56B10-1DCC-451B-A74C-9C3E22E60628}_Small.jpg"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\AlbumArtSmall.jpg"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\Folder.jpg"

Sent from Mail for Windows 10

From: Glenn / Lenny
Sent: 14 September 2019 01:32
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

I find it pretty easy to make a playlist using NotePad and copying the path of the files I want in the playlist.

Shift + applications then the letter A copies the full path of the file for the playlist and then I paste that in NotePad.

I actually use control + space bar for all the files in a folder before doing the copy path command, so I can copy the path of a bunch of files at once.

Then when I'm done and save the TXT file, I exit NotePad and rename the file extension from TXT to M3U.

Glenn

----- Original Message -----

From:

Sent: Friday, September 13, 2019 7:24 PM

Subject: Re: Does the latest ITuneds work with JFW 2019?

Kevin,  I use Winamp all of the time and I have created lots of play lists with it.  It is totally keyboard accessible.

Love in Christ
Marty
For our struggle is not against flesh and blood, but against the rulers, against the powers, against the world forces of this darkness, against the spiritual forces of wickedness in the heavenly places.
Therefore, take up the full armor of God, so that you will be able to resist in the evil day, and having done everything, to stand firm.
Ephesians 6:12, 13

From:

Sent: Friday, September 13, 2019 5:56 PM

Subject: Re: Does the latest ITuneds work with JFW 2019?

Does Winamp or Groove allow one to create playlists?

From: main@jfw.groups.io <main@JFW.groups.io> On Behalf Of Jaffar Sidek
Sent: Friday, September 13, 2019 5:24 PM
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

Hi. I wouldn't wish ITune for Windows on my worst enemy.  Stick to Winamp or Groove Music or Windows Media player even and they should do a more then adequate job of allowing you to organize your music collection.  ITunes is excellent on the mac, but  a horror on windows.  Cheers!

On 9/14/2019 2:07 AM, Kevin Meyers wrote:

I started to use ITunes with Jaws 2019 and doesn’t work to well. I have a hard time with the playlists I created to show. Then when I navigate around eventually a certain playlist shows. At least I thought it did. Then I press enter on the play button and it plays a song in a different playlist. Is there a way to change something in Jaws settings or ITune settings to get it to work better?

From: main@jfw.groups.io mailto:main@jfw.groups.io On Behalf Of Richard Turner
Sent: Friday, September 13, 2019 12:34 PM
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

It isn't any worse.

What areas are you most concerned with?

Richard

Always look out for #1, and be careful not to step in #2.

On Sep 13, 2019, at 9:10 AM, Ralph Supernaw <rhs@...> wrote:

﻿

Hi,

I have been putting off letting ITunes update to the latest version.  Before I do I thought I’d find out if I will regret it.

Thanks.

moderated Scanning a document in K1000 and Open Book

tom x

Hi,

Does anyone know if there is a setting which can be altered in the latest versions of either K1000 or Open Book so that the display on the screen   or the saved document matches the layout of the original material?

I need to scan some technical material and have the result match the layout of the original document.  Currently the lines are joined and all over the place which is vastly different from the original document.

Can anyone help?

Thanks

Tom

moderated Absolutely Essential Information to Share When You Have an Issue and How to Get It

Lately, on several groups including this one, there are folks requesting help where very little information other than "the problem behavior" is provided.  It is really impossible for any assistant to even begin formulating a response unless they know the actual computing environment in which said problem behavior is occurring.  It makes no sense to guess about any of these essentials, and they're very easy to get and provide when you have an issue you want help with.
------------------------------------------------------------------------

Absolutely Essential Information to Share When You Have a Problem and How to Get It

1.        Operating System Details:

a.       Run the winver command, you can do this using the Windows Key, typing it then hitting enter

b.      Using Windows Key+R, typing winver in the edit box then hitting enter

c.       Opening Command Prompt and entering winver

You will then get a pop-up window giving you the Windows Version, Build, and Edition.

a.       NVDA:          NVDA+N,H,A

b.      JAWS:            JAWS+J,ALT+H,A

3.       Software Version:  This will vary to some extent, but for the vast majority using the Help menu, About option will give you this information.  Very often ALT+H,A.

--

Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362

Many of the insights of the saint stem from his experience as a sinner.

~ Eric Hoffer

moderated Re: Emailing: Henry's ada paratransit application.docx

N K Shackelford

Nance

On 9/14/19, HH. Smith Jr. <josham129@gmail.com> wrote:
Please check to make sue we placed the X in the correct spot.

Thank you

Mom
attachments: