Date   

moderated Re: JAWS Dump Command

Tom Behler
 

Thanks, Dan.

I thought there was more to the Jaws dump command.

You have successfully jogged my memory.

Tom Behler

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Monday, August 26, 2019 4:51 PM
To: main@jfw.groups.io
Subject: Re: JAWS Dump Command

Slight correction, JAWS key & Windows key & F4 dumps and reloads JAWS. JAWS key and F4 simply dumps JAWS without reload .

Dan

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of netbat66
Sent: Monday, August 26, 2019 4:41 PM
To: main@jfw.groups.io
Subject: Re: JAWS Dump Command

jaws key and f4 dumps and reloads jaws.
it depends on your keyboard layout.
the jaws key can be the insert keys or the caps lock key and the f4 key.

-----Original Message-----
From: Tom Behler
Sent: Monday, August 26, 2019 12:35 PM
To: main@jfw.groups.io
Subject: Re: JAWS Dump Command

Can someone tell me what the Jaws dump command is?

I simply can't remember the key combination.

Thank you!

Tom Behler


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Monday, August 26, 2019 3:28 PM
To: main@jfw.groups.io
Subject: Re: JAWS Dump Command

Sure. It will only restart if it isn't so "broken" that it can't recognise the command.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cook, Steve
Sent: August 26, 2019 9:24 AM
To: main@jfw.groups.io
Subject: JAWS Dump Command

Hi All,

Has anyone else noticed when pressing the jaws dump command jaws does not automatically restart?

Steve


moderated Re: JAWS Dump Command

Tom Behler
 

I thought the Jaws and f4 keys just closed down Jaws, but didn't completely dump it.

If I'm wrong about this, I hope someone will correct me.

I think the Jaws dump command clears certain temporary Jaws configurations in addition to closing it down.

Tom Behler

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of netbat66
Sent: Monday, August 26, 2019 4:41 PM
To: main@jfw.groups.io
Subject: Re: JAWS Dump Command

jaws key and f4 dumps and reloads jaws.
it depends on your keyboard layout.
the jaws key can be the insert keys or the caps lock key and the f4 key.

-----Original Message-----
From: Tom Behler
Sent: Monday, August 26, 2019 12:35 PM
To: main@jfw.groups.io
Subject: Re: JAWS Dump Command

Can someone tell me what the Jaws dump command is?

I simply can't remember the key combination.

Thank you!

Tom Behler


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Monday, August 26, 2019 3:28 PM
To: main@jfw.groups.io
Subject: Re: JAWS Dump Command

Sure. It will only restart if it isn't so "broken" that it can't recognise the command.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cook, Steve
Sent: August 26, 2019 9:24 AM
To: main@jfw.groups.io
Subject: JAWS Dump Command

Hi All,

Has anyone else noticed when pressing the jaws dump command jaws does not automatically restart?

Steve


moderated Re: how does one join the new JAWS list

Glenn / Lenny
 


I personally did not know about this one until the other one failed.
I was considering creating one myself because of the manner that the old one was managed.
Then the other one closed and someone informed me of this one.
Glenn

----- Original Message -----
Sent: Monday, August 26, 2019 5:03 PM
Subject: Re: how does one join the new JAWS list

Brian,
I could not agree more.
Why people were so quick to recreate a group when this one was running fine is a mystery to me.


Richard

Always look out for #1, and be careful not to step in #2. 


On Aug 26, 2019, at 2:54 PM, Brian Vogel <britechguy@...> wrote:

On Mon, Aug 26, 2019 at 05:42 PM, Richard Turner wrote:
Since, as far as know, there isn't an official group run by Freedom Scientific, nor one run by Mozilla for Thunderbird, etc.
And for this I am grateful, as I do not want my support groups beholden to the companies that make any given product or service.  User groups need to allow users to be entirely free to criticize the maker of the product being discussed, provided it's constructive or brief venting.  Intractable rants don't help anyone and drive serious participants away.

I realize that there sometimes more than one group/list for a given product, and a lot of that can be the result of history.   But when you have several groups, covering the same territory in the same first language on the same venue, common sense dictates trying to integrate them.  In this case, it was a perfectly convenient time to do that, but apparently it won't happen secondary to the "rush to reconstitute" rather than coming into this fold.

Unless there is some compelling case, I stand against fragmentation of information sharing for a given arena/product on principle.  It makes it harder to find what you need to know.

And I hasten to add that this is, in no way, saying that this group is superior to any other on the same topic.  It's just that it is one with a large membership and well-established reputation and track record with regard to JAWS.  Others (and I have been on some, typically briefly) have paled in comparison in my opinion and when they dissolve it would be nice to try to encourage those displaced to transfer allegiances rather than setting up replacements.   If this were the group that had less than half the membership of "its next competitor" and it were to go out of existence, I'd certainly say, "Well, it's time to join the one that's still standing."
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362  

Many of the insights of the saint stem from his experience as a sinner.

         ~ Eric Hoffer


moderated Re: how does one join the new JAWS list

Gerald Levy
 

Not any more.  There will soon be a second list devoted to NVDA, just as a second list has been created for JAWS users. Apparently, the creator of the new NVDA list, who has had a long history of being argumentative and confrontational on every list he belongs to, was stripped of his co-moderator status on the original NVDA list because of complaints from other list members and so, like the creator of the new JFW Users list, he decided to get even  and start his own NVDA list, where he can be as confrontational as he wants. I won't mention his name, but anyone who belongs to the Blind Tech or Tech Talk lists knows who I'm talking about.

Gerald

On 8/26/2019 5:34 PM, Mario wrote:
I agree. there should be one list for JAWS, just like there's one for
NVDA, Windows 10, Thunderbird, etc. questions.

------- Original Message --------
From: JM Casey [mailto:jmcasey@...]
To: <main@jfw.groups.io>
Date: Monday, August 26, 2019, 5:17 PM
Subject: how does one join the new JAWS list

Sounds reasonable to me. Besides which, if there are 2+ lists
essentially covering the same ground, and a bunch of people are on
both/all of them, what’ll happen is that you’ll end up seeing the same
question repeated multiple times.

*From:*main@jfw.groups.io <main@jfw.groups.io> *On Behalf Of *Brian Vogel
*Sent:* August 26, 2019 4:41 PM
*To:* main@jfw.groups.io
*Subject:* Re: how does one join the new JAWS list

OK, I hope that our estimable group owner here on this group will not
find what I'm about to do upsetting, but now I must:

Why, oh why, does there even need to be another JAWS users group on
Groups.io?

It seems that all the refugees (for lack of a better term) from the now
defunct group that have landed on our shores have been welcomed to our
island.  Why on earth form another island, again, for information
sharing about exactly the same software that we share about here?  Why
not just come here and join our happy family?

What is the pressing need for JAWS user's groups two through N, at least
within any given language community? What am I missing?


moderated Re: JAWS Dump Command

Rick Mladek
 

Pardon my ignorance here but what memory is cleared with this dump command?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Monday, August 26, 2019 4:58 PM
To: main@jfw.groups.io
Subject: Re: JAWS Dump Command

I have not noticed that occuring when using the JAWS & Windows & F4 however
there is a long delay before it occurs as memory is being cleared.

Dan

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cook, Steve
Sent: Monday, August 26, 2019 9:24 AM
To: main@jfw.groups.io
Subject: JAWS Dump Command

Hi All,

Has anyone else noticed when pressing the jaws dump command jaws does not
automatically restart?

Steve


moderated Re: how does one join the new JAWS list

Cristóbal
 

Same reason why I’m not signed up to every single social media service out there. At one point, you end up following the same people and same topics. Can also be applied for communication platforms. No matter if I have FB messenger, Skype or sign up to WhatsApp, it’s still the same folks in my contacts. How many ways do I need to contact you or vice versa?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Vogel
Sent: Monday, August 26, 2019 2:55 PM
To: main@jfw.groups.io
Subject: Re: how does one join the new JAWS list

 

On Mon, Aug 26, 2019 at 05:42 PM, Richard Turner wrote:

Since, as far as know, there isn't an official group run by Freedom Scientific, nor one run by Mozilla for Thunderbird, etc.

And for this I am grateful, as I do not want my support groups beholden to the companies that make any given product or service.  User groups need to allow users to be entirely free to criticize the maker of the product being discussed, provided it's constructive or brief venting.  Intractable rants don't help anyone and drive serious participants away.

I realize that there sometimes more than one group/list for a given product, and a lot of that can be the result of history.   But when you have several groups, covering the same territory in the same first language on the same venue, common sense dictates trying to integrate them.  In this case, it was a perfectly convenient time to do that, but apparently it won't happen secondary to the "rush to reconstitute" rather than coming into this fold.

Unless there is some compelling case, I stand against fragmentation of information sharing for a given arena/product on principle.  It makes it harder to find what you need to know.

And I hasten to add that this is, in no way, saying that this group is superior to any other on the same topic.  It's just that it is one with a large membership and well-established reputation and track record with regard to JAWS.  Others (and I have been on some, typically briefly) have paled in comparison in my opinion and when they dissolve it would be nice to try to encourage those displaced to transfer allegiances rather than setting up replacements.   If this were the group that had less than half the membership of "its next competitor" and it were to go out of existence, I'd certainly say, "Well, it's time to join the one that's still standing."
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362  

Many of the insights of the saint stem from his experience as a sinner.

         ~ Eric Hoffer


moderated Re: how does one join the new JAWS list

Richard Turner
 

Brian,
I could not agree more.
Why people were so quick to recreate a group when this one was running fine is a mystery to me.


Richard

Always look out for #1, and be careful not to step in #2. 


On Aug 26, 2019, at 2:54 PM, Brian Vogel <britechguy@...> wrote:

On Mon, Aug 26, 2019 at 05:42 PM, Richard Turner wrote:
Since, as far as know, there isn't an official group run by Freedom Scientific, nor one run by Mozilla for Thunderbird, etc.
And for this I am grateful, as I do not want my support groups beholden to the companies that make any given product or service.  User groups need to allow users to be entirely free to criticize the maker of the product being discussed, provided it's constructive or brief venting.  Intractable rants don't help anyone and drive serious participants away.

I realize that there sometimes more than one group/list for a given product, and a lot of that can be the result of history.   But when you have several groups, covering the same territory in the same first language on the same venue, common sense dictates trying to integrate them.  In this case, it was a perfectly convenient time to do that, but apparently it won't happen secondary to the "rush to reconstitute" rather than coming into this fold.

Unless there is some compelling case, I stand against fragmentation of information sharing for a given arena/product on principle.  It makes it harder to find what you need to know.

And I hasten to add that this is, in no way, saying that this group is superior to any other on the same topic.  It's just that it is one with a large membership and well-established reputation and track record with regard to JAWS.  Others (and I have been on some, typically briefly) have paled in comparison in my opinion and when they dissolve it would be nice to try to encourage those displaced to transfer allegiances rather than setting up replacements.   If this were the group that had less than half the membership of "its next competitor" and it were to go out of existence, I'd certainly say, "Well, it's time to join the one that's still standing."
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362  

Many of the insights of the saint stem from his experience as a sinner.

         ~ Eric Hoffer


moderated Re: how does one join the new JAWS list

 

On Mon, Aug 26, 2019 at 05:42 PM, Richard Turner wrote:
Since, as far as know, there isn't an official group run by Freedom Scientific, nor one run by Mozilla for Thunderbird, etc.
And for this I am grateful, as I do not want my support groups beholden to the companies that make any given product or service.  User groups need to allow users to be entirely free to criticize the maker of the product being discussed, provided it's constructive or brief venting.  Intractable rants don't help anyone and drive serious participants away.

I realize that there sometimes more than one group/list for a given product, and a lot of that can be the result of history.   But when you have several groups, covering the same territory in the same first language on the same venue, common sense dictates trying to integrate them.  In this case, it was a perfectly convenient time to do that, but apparently it won't happen secondary to the "rush to reconstitute" rather than coming into this fold.

Unless there is some compelling case, I stand against fragmentation of information sharing for a given arena/product on principle.  It makes it harder to find what you need to know.

And I hasten to add that this is, in no way, saying that this group is superior to any other on the same topic.  It's just that it is one with a large membership and well-established reputation and track record with regard to JAWS.  Others (and I have been on some, typically briefly) have paled in comparison in my opinion and when they dissolve it would be nice to try to encourage those displaced to transfer allegiances rather than setting up replacements.   If this were the group that had less than half the membership of "its next competitor" and it were to go out of existence, I'd certainly say, "Well, it's time to join the one that's still standing."
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362  

Many of the insights of the saint stem from his experience as a sinner.

         ~ Eric Hoffer


moderated Re: how does one join the new JAWS list

Richard Turner
 

The only issue is that people can create groups almost at the drop of the hat.
I guess, if people decided to only join one group, eventually the other group would go away.

But, which group?
Since, as far as know, there isn't an official group run by Freedom Scientific, nor one run by Mozilla for Thunderbird, etc.
I know there are multiple groups out there for most every topic, but I personally only belong to I think 4 distinct groups.
Well, as far as I know, there are no officially sponsored groups for most things.
Anyone can start a group, so good luck with getting the number of groups narrowed down.


Richard

Always look out for #1, and be careful not to step in #2. 


On Aug 26, 2019, at 2:34 PM, Mario <mrb620@...> wrote:

I agree. there should be one list for JAWS, just like there's one for
NVDA, Windows 10, Thunderbird, etc.  questions.

------- Original Message --------
From: JM Casey [mailto:jmcasey@...]
To: <main@jfw.groups.io>
Date: Monday, August 26, 2019, 5:17 PM
Subject: how does one join the new JAWS list

Sounds reasonable to me. Besides which, if there are 2+ lists
essentially covering the same ground, and a bunch of people are on
both/all of them, what’ll happen is that you’ll end up seeing the same
question repeated multiple times.

*From:*main@jfw.groups.io <main@jfw.groups.io> *On Behalf Of *Brian Vogel
*Sent:* August 26, 2019 4:41 PM
*To:* main@jfw.groups.io
*Subject:* Re: how does one join the new JAWS list

OK, I hope that our estimable group owner here on this group will not
find what I'm about to do upsetting, but now I must:

Why, oh why, does there even need to be another JAWS users group on
Groups.io?

It seems that all the refugees (for lack of a better term) from the now
defunct group that have landed on our shores have been welcomed to our
island.  Why on earth form another island, again, for information
sharing about exactly the same software that we share about here?  Why
not just come here and join our happy family?

What is the pressing need for JAWS user's groups two through N, at least
within any given language community? What am I missing?

--

Brian *-*Windows 10 Pro, 64-Bit, Version 1903, Build 18362

Many of the insights of the saint stem from his experience as a sinner.

          ~ Eric Hoffer







moderated Re: how does one join the new JAWS list

Mario
 

I agree. there should be one list for JAWS, just like there's one for
NVDA, Windows 10, Thunderbird, etc. questions.

------- Original Message --------
From: JM Casey [mailto:jmcasey@...]
To: <main@jfw.groups.io>
Date: Monday, August 26, 2019, 5:17 PM
Subject: how does one join the new JAWS list

Sounds reasonable to me. Besides which, if there are 2+ lists
essentially covering the same ground, and a bunch of people are on
both/all of them, what’ll happen is that you’ll end up seeing the same
question repeated multiple times.

*From:*main@jfw.groups.io <main@jfw.groups.io> *On Behalf Of *Brian Vogel
*Sent:* August 26, 2019 4:41 PM
*To:* main@jfw.groups.io
*Subject:* Re: how does one join the new JAWS list

OK, I hope that our estimable group owner here on this group will not
find what I'm about to do upsetting, but now I must:

Why, oh why, does there even need to be another JAWS users group on
Groups.io?

It seems that all the refugees (for lack of a better term) from the now
defunct group that have landed on our shores have been welcomed to our
island.  Why on earth form another island, again, for information
sharing about exactly the same software that we share about here?  Why
not just come here and join our happy family?

What is the pressing need for JAWS user's groups two through N, at least
within any given language community? What am I missing?

--

Brian *-*Windows 10 Pro, 64-Bit, Version 1903, Build 18362

Many of the insights of the saint stem from his experience as a sinner.

         ~ Eric Hoffer


moderated Re: how does one join the new JAWS list

cecropia64
 

well, you know the old adage, the grass is greener??? well, maybe that is it.?? problem is if all the info is the same, and it will be, i agree.?? what is the point??? oh well, onward and upward.


stew

On 8/26/2019 5:17 PM, JM Casey wrote:

Sounds reasonable to me. Besides which, if there are 2+ lists essentially covering the same ground, and a bunch of people are on both/all of them, what???ll happen is that you???ll end up seeing the same question repeated multiple times.

*From:*main@jfw.groups.io <main@jfw.groups.io> *On Behalf Of *Brian Vogel
*Sent:* August 26, 2019 4:41 PM
*To:* main@jfw.groups.io
*Subject:* Re: how does one join the new JAWS list

OK, I hope that our estimable group owner here on this group will not find what I'm about to do upsetting, but now I must:

Why, oh why, does there even need to be another JAWS users group on Groups.io?

It seems that all the refugees (for lack of a better term) from the now defunct group that have landed on our shores have been welcomed to our island.?? Why on earth form another island, again, for information sharing about exactly the same software that we share about here??? Why not just come here and join our happy family?

What is the pressing need for JAWS user's groups two through N, at least within any given language community? What am I missing?

--

Brian *-*Windows 10 Pro, 64-Bit,??Version 1903, Build 18362

Many of the insights of the saint stem from his experience as a sinner.

~ Eric Hoffer


moderated Re: JAWS Dump Command

Mario
 

nope. windows+insert+f4 dumps JAWS from memory, and should relaunch
JAWS. insert+f4 merely shuts down/unloads JAWS without relaunching JAWS.

-------- Original Message --------
From: netbat66 [mailto:netbat66@...]
To: <main@jfw.groups.io>
Date: Monday, August 26, 2019, 4:41 PM
Subject: JAWS Dump Command

jaws key and f4 dumps and reloads jaws.
it depends on your keyboard layout.
the jaws key can be the insert keys or the caps lock key and the f4 key.

-----Original Message----- From: Tom Behler
Sent: Monday, August 26, 2019 12:35 PM
To: main@jfw.groups.io
Subject: Re: JAWS Dump Command

Can someone tell me what the Jaws dump command is?

I simply can't remember the key combination.

Thank you!

Tom Behler


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Monday, August 26, 2019 3:28 PM
To: main@jfw.groups.io
Subject: Re: JAWS Dump Command

Sure. It will only restart if it isn't so "broken" that it can't recognise
the command.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cook, Steve
Sent: August 26, 2019 9:24 AM
To: main@jfw.groups.io
Subject: JAWS Dump Command

Hi All,

Has anyone else noticed when pressing the jaws dump command jaws does not
automatically restart?

Steve













.


moderated Re: how does one join the new JAWS list

JM Casey
 

Sounds reasonable to me. Besides which, if there are 2+ lists essentially covering the same ground, and a bunch of people are on both/all of them, what’ll happen is that you’ll end up seeing the same question repeated multiple times.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Vogel
Sent: August 26, 2019 4:41 PM
To: main@jfw.groups.io
Subject: Re: how does one join the new JAWS list

 

OK, I hope that our estimable group owner here on this group will not find what I'm about to do upsetting, but now I must:

Why, oh why, does there even need to be another JAWS users group on Groups.io?

It seems that all the refugees (for lack of a better term) from the now defunct group that have landed on our shores have been welcomed to our island.  Why on earth form another island, again, for information sharing about exactly the same software that we share about here?  Why not just come here and join our happy family?

What is the pressing need for JAWS user's groups two through N, at least within any given language community? What am I missing?

--

Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362  

Many of the insights of the saint stem from his experience as a sinner.

         ~ Eric Hoffer


moderated Re: JAWS Dump Command

JM Casey
 

Jaws Key + f4 doesn't create a dump, just unloads the programme. A dump is
just a bunch of stuff from memory contents that might help someone figure
out what caused a problem.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: August 26, 2019 4:53 PM
To: main@jfw.groups.io
Subject: Re: JAWS Dump Command

JAWS key & F4 dumps JAWS without reloading.
JAWS key &Windows key & F4 dumps JAWS and automatically reloads JAWS.

Dan

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: Monday, August 26, 2019 3:36 PM
To: main@jfw.groups.io
Subject: Re: JAWS Dump Command

Can someone tell me what the Jaws dump command is?

I simply can't remember the key combination.

Thank you!

Tom Behler


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Monday, August 26, 2019 3:28 PM
To: main@jfw.groups.io
Subject: Re: JAWS Dump Command

Sure. It will only restart if it isn't so "broken" that it can't recognise
the command.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cook, Steve
Sent: August 26, 2019 9:24 AM
To: main@jfw.groups.io
Subject: JAWS Dump Command

Hi All,

Has anyone else noticed when pressing the jaws dump command jaws does not
automatically restart?

Steve


moderated Re: JAWS Dump Command

Dan Longmore
 

I have not noticed that occuring when using the JAWS & Windows & F4 however
there is a long delay before it occurs as memory is being cleared.

Dan

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cook, Steve
Sent: Monday, August 26, 2019 9:24 AM
To: main@jfw.groups.io
Subject: JAWS Dump Command

Hi All,

Has anyone else noticed when pressing the jaws dump command jaws does not
automatically restart?

Steve


moderated Re: JAWS Dump Command

Dan Longmore
 

JAWS key & F4 dumps JAWS without reloading.
JAWS key &Windows key & F4 dumps JAWS and automatically reloads JAWS.

Dan

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: Monday, August 26, 2019 3:36 PM
To: main@jfw.groups.io
Subject: Re: JAWS Dump Command

Can someone tell me what the Jaws dump command is?

I simply can't remember the key combination.

Thank you!

Tom Behler


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Monday, August 26, 2019 3:28 PM
To: main@jfw.groups.io
Subject: Re: JAWS Dump Command

Sure. It will only restart if it isn't so "broken" that it can't recognise
the command.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cook, Steve
Sent: August 26, 2019 9:24 AM
To: main@jfw.groups.io
Subject: JAWS Dump Command

Hi All,

Has anyone else noticed when pressing the jaws dump command jaws does not
automatically restart?

Steve


moderated Re: JAWS Dump Command

Dan Longmore
 

Slight correction, JAWS key & Windows key & F4 dumps and reloads JAWS. JAWS key and F4 simply dumps JAWS without reload .

Dan

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of netbat66
Sent: Monday, August 26, 2019 4:41 PM
To: main@jfw.groups.io
Subject: Re: JAWS Dump Command

jaws key and f4 dumps and reloads jaws.
it depends on your keyboard layout.
the jaws key can be the insert keys or the caps lock key and the f4 key.

-----Original Message-----
From: Tom Behler
Sent: Monday, August 26, 2019 12:35 PM
To: main@jfw.groups.io
Subject: Re: JAWS Dump Command

Can someone tell me what the Jaws dump command is?

I simply can't remember the key combination.

Thank you!

Tom Behler


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Monday, August 26, 2019 3:28 PM
To: main@jfw.groups.io
Subject: Re: JAWS Dump Command

Sure. It will only restart if it isn't so "broken" that it can't recognise the command.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cook, Steve
Sent: August 26, 2019 9:24 AM
To: main@jfw.groups.io
Subject: JAWS Dump Command

Hi All,

Has anyone else noticed when pressing the jaws dump command jaws does not automatically restart?

Steve


moderated Re: JAWS Dump Command

netbat66
 

jaws key and f4 dumps and reloads jaws.
it depends on your keyboard layout.
the jaws key can be the insert keys or the caps lock key and the f4 key.

-----Original Message-----
From: Tom Behler
Sent: Monday, August 26, 2019 12:35 PM
To: main@jfw.groups.io
Subject: Re: JAWS Dump Command

Can someone tell me what the Jaws dump command is?

I simply can't remember the key combination.

Thank you!

Tom Behler


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Monday, August 26, 2019 3:28 PM
To: main@jfw.groups.io
Subject: Re: JAWS Dump Command

Sure. It will only restart if it isn't so "broken" that it can't recognise
the command.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cook, Steve
Sent: August 26, 2019 9:24 AM
To: main@jfw.groups.io
Subject: JAWS Dump Command

Hi All,

Has anyone else noticed when pressing the jaws dump command jaws does not
automatically restart?

Steve


moderated Re: how does one join the new JAWS list

 

OK, I hope that our estimable group owner here on this group will not find what I'm about to do upsetting, but now I must:

Why, oh why, does there even need to be another JAWS users group on Groups.io?

It seems that all the refugees (for lack of a better term) from the now defunct group that have landed on our shores have been welcomed to our island.  Why on earth form another island, again, for information sharing about exactly the same software that we share about here?  Why not just come here and join our happy family?

What is the pressing need for JAWS user's groups two through N, at least within any given language community? What am I missing?

--

Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362  

Many of the insights of the saint stem from his experience as a sinner.

         ~ Eric Hoffer


moderated Re: Excel and jaws;

Jschliff@...
 

Another quick way is to copy a date from another date formatted cell and then change the date to the date you want.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Chris Chaffin
Sent: Monday, August 26, 2019 1:18 PM
To: main@jfw.groups.io
Subject: Re: Excel and jaws;

 

 

I am not sure what you are exactly trying to do.   You said that Excel is not recognizing dates as text only.

Excel recognizes the contents of a cell depending on how you have the cell formatted.  How do you have the cells you are entering dates in formatted?  To change the format of a cell hit control and the number 1 on the numbers row.  This will bring up the format dialog box.  I would recommend changing the format of the cells to date to see if this helps you accomplish what you are trying to do.

 

Chris

 


On Aug 26, 2019, at 12:07 PM, david <davidmac1957@...> wrote:

 

Good afternoon all; perhaps someone can help me.  this is from one of my clients.

 

I wonder if you had a suggestion about a problem I am having with excel. I have gone through all of the help info with no luck at all. I don’t know if you can help but here it is. Excel does not recognize date formats as numbers only as text. When I enter a dates in a date column I need it to be recognized as a date in order to sort them to put them in order. I have no luck in using the date value or value function getting an error that my formula is wrong. I have gone on the internet and have had no luck with support.microsoft.com and it isn’t a disability issue for Microsoft accessibility help. Is there something I am missing? Do you have any suggestions ?

 

       The impossible is the untried,  Never under estimate the power of a dream.