Date   
moderated Re: Another Winamp Question

Tom Behler
 

Thanks, John.

 

I’ll add this suggestion to my notes for when the problem comes up again, which I’m sure it will.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Gurd via Groups.Io
Sent: Sunday, August 11, 2019 4:17 AM
To: main@jfw.groups.io
Subject: Re: Another Winamp Question

 

Hi Tom, Bill told you the best way to get rid of for good. But another way that worked for me for individual devices was to press Jaws F10 to bring up a list of running applications. The Yes/No appears here and allows you to focus on it and click no to get rid of it for the device you are using with Winamp.


On 10 Aug 2019, at 21:06, JM Casey <jmcasey@...> wrote:

Well, this is all very odd. I would have to reinstall winamp in order to experience this dialogue again since I have the related plugin uninstalled completely, but, yes, I do remember it. I also don’t really remember it being a  problem, though, just a minor annoyance.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: August 9, 2019 4:06 PM
To: jfw list <jfw@groups.io>
Subject: Another Winamp Question

 

Hello, everyone.

 

Within the past few wekes, whenever I try to play an audio file from my external hard drive with Winamp, I get a message that says something like:  “Winamp has detected a an external drive;  do you want Winamp to access  this drive?”.

 

There is a yes/no button, but I can’t get to it.

 

I have tried enter, and the space bar.  I also have tried rooting the Jaws cursor to the PC cursor, but have had no luck.

 

Occasionally, after trying, I can get the message to play, but then I get an error message about reporting the problem to Winamp.

 

And, once I get these messages, the only way I can get rid of them is to completely shut down and re-boot my computer.

 

Has anyone experienced this issue?  If so, how can I respond, or better yet, how can I turn this anoying notification off?

 

I’m using windows 10 version 1809 with the latest build of Jaws 2019.

 

Thanks!

 

Tom Behler

 

 

moderated Re: Disk repair utility, usable with JAWS

Gerald Levy
 

Spinwrite??? Are you serious??? My understanding is that Spinwrite does not work with versions of Windows higher than XP.?? Have you used it successfully with Windows 7 or 10?


Gerald

On 8/11/2019 6:34 AM, John Covici wrote:
I would get smartmontools and see what it says about your drive.
Also, a great utility for disk repair is spinwrite at www.grc.com.

On Sun, 11 Aug 2019 06:00:21 -0400,
Dave Durber wrote:
Hello Everyone:

I have a system running Windows 7 Professional 64 BIT, which I
intend upgrading to Windows 10 when I get a new Motherboard for
it. I have JAWS 2018 installed on it. In addition to the CD-DVD
ROM, it has a 120 GB SSD, which is the system drive, and 2 1 TB
Hdd Drives, which ar F and G.

Yesterday, when I started the system, I tried to log onto drive
g. Windows reported a drive error. Of course, being Windows, the
operating system did not tell me what type of error was affecting
the drive, only that Windows could not access it.

I ran CMD, and in the DOS shell window, I used CHKDSK with the /f
switch. CHKDSK, reported that it could not attempt to scan the
drive because of a drive error and closed itself and returned me
to the DOS Shell window.

My question is, is anyone on this list, using a good disk repair
utility, which is accessible using JAWS
At present, I have no idea, as to whether the problem is with
the partition, its format or the problem is with the files which
hold the information about the data stored on the drive.

Any Suggestions please.

Sincerely:

Dave Durber



moderated Re: Disk repair utility, usable with JAWS

John Covici
 

I would get smartmontools and see what it says about your drive.
Also, a great utility for disk repair is spinwrite at www.grc.com.

On Sun, 11 Aug 2019 06:00:21 -0400,
Dave Durber wrote:

Hello Everyone:

I have a system running Windows 7 Professional 64 BIT, which I
intend upgrading to Windows 10 when I get a new Motherboard for
it. I have JAWS 2018 installed on it. In addition to the CD-DVD
ROM, it has a 120 GB SSD, which is the system drive, and 2 1 TB
Hdd Drives, which ar F and G.

Yesterday, when I started the system, I tried to log onto drive
g. Windows reported a drive error. Of course, being Windows, the
operating system did not tell me what type of error was affecting
the drive, only that Windows could not access it.

I ran CMD, and in the DOS shell window, I used CHKDSK with the /f
switch. CHKDSK, reported that it could not attempt to scan the
drive because of a drive error and closed itself and returned me
to the DOS Shell window.

My question is, is anyone on this list, using a good disk repair
utility, which is accessible using JAWS
At present, I have no idea, as to whether the problem is with
the partition, its format or the problem is with the files which
hold the information about the data stored on the drive.

Any Suggestions please.

Sincerely:

Dave Durber



--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@...

moderated Disk repair utility, usable with JAWS

Dave Durber
 

Hello Everyone:

I have a system running Windows 7 Professional 64 BIT, which I intend upgrading to Windows 10 when I get a new Motherboard for it. I have JAWS 2018 installed on it. In addition to the CD-DVD ROM, it has a 120 GB SSD, which is the system drive, and 2 1 TB Hdd Drives, which ar F and G.

Yesterday, when I started the system, I tried to log onto drive g. Windows reported a drive error. Of course, being Windows, the operating system did not tell me what type of error was affecting the drive, only that Windows could not access it.

I ran CMD, and in the DOS shell window, I used CHKDSK with the /f switch. CHKDSK, reported that it could not attempt to scan the drive because of a drive error and closed itself and returned me to the DOS Shell window.

My question is, is anyone on this list, using a good disk repair utility, which is accessible using JAWS
At present, I have no idea, as to whether the problem is with the partition, its format or the problem is with the files which hold the information about the data stored on the drive.

Any Suggestions please.

Sincerely:

Dave Durber

moderated Re: Another Winamp Question

John Gurd
 

Hi Tom, Bill told you the best way to get rid of for good. But another way that worked for me for individual devices was to press Jaws F10 to bring up a list of running applications. The Yes/No appears here and allows you to focus on it and click no to get rid of it for the device you are using with Winamp.


On 10 Aug 2019, at 21:06, JM Casey <jmcasey@...> wrote:

Well, this is all very odd. I would have to reinstall winamp in order to experience this dialogue again since I have the related plugin uninstalled completely, but, yes, I do remember it. I also don’t really remember it being a  problem, though, just a minor annoyance.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: August 9, 2019 4:06 PM
To: jfw list <jfw@groups.io>
Subject: Another Winamp Question

 

Hello, everyone.

 

Within the past few wekes, whenever I try to play an audio file from my external hard drive with Winamp, I get a message that says something like:  “Winamp has detected a an external drive;  do you want Winamp to access  this drive?”.

 

There is a yes/no button, but I can’t get to it.

 

I have tried enter, and the space bar.  I also have tried rooting the Jaws cursor to the PC cursor, but have had no luck.

 

Occasionally, after trying, I can get the message to play, but then I get an error message about reporting the problem to Winamp.

 

And, once I get these messages, the only way I can get rid of them is to completely shut down and re-boot my computer.

 

Has anyone experienced this issue?  If so, how can I respond, or better yet, how can I turn this anoying notification off?

 

I’m using windows 10 version 1809 with the latest build of Jaws 2019.

 

Thanks!

 

Tom Behler

 

 

moderated Re: Another Winamp Question

JM Casey
 

Well, this is all very odd. I would have to reinstall winamp in order to experience this dialogue again since I have the related plugin uninstalled completely, but, yes, I do remember it. I also don’t really remember it being a  problem, though, just a minor annoyance.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: August 9, 2019 4:06 PM
To: jfw list <jfw@groups.io>
Subject: Another Winamp Question

 

Hello, everyone.

 

Within the past few wekes, whenever I try to play an audio file from my external hard drive with Winamp, I get a message that says something like:  “Winamp has detected a an external drive;  do you want Winamp to access  this drive?”.

 

There is a yes/no button, but I can’t get to it.

 

I have tried enter, and the space bar.  I also have tried rooting the Jaws cursor to the PC cursor, but have had no luck.

 

Occasionally, after trying, I can get the message to play, but then I get an error message about reporting the problem to Winamp.

 

And, once I get these messages, the only way I can get rid of them is to completely shut down and re-boot my computer.

 

Has anyone experienced this issue?  If so, how can I respond, or better yet, how can I turn this anoying notification off?

 

I’m using windows 10 version 1809 with the latest build of Jaws 2019.

 

Thanks!

 

Tom Behler

 

 

moderated Re: Another Winamp Question

JM Casey
 

I noticed this too, but I  was using the same version of Winamp on my xp machine without this issue, so I think it has something to do with Windows 10, or at least, I thought it did, but you verifying that an older version of Winamp actually does not have this issue is – very interesting.

In any case, I pretty much stopped using shift-l to add folders to playlists because of this, and now just use the context/shell option instead, which is really just as good … better as far as Windows itself is concerned, anyway.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Steve Matzura
Sent: August 9, 2019 7:17 PM
To: main@jfw.groups.io
Subject: Re: Another Winamp Question

 

I've discovered an interesting   problem with that version. If I press Shift plus L to open a folder, I can navigate to a folder which I absolutely know contains nearly three hundred folders, but Winamp says there's only one. If I remove  5.666 and reinstall 5.63, it works correctly. Weird, eh?

 

On 8/9/2019 5:25 PM, Bill White wrote:

Hi, Tom. Which version of Winamp are you using? I am using Winamp version 5.66, full, and I am not getting this message.

 

Bill White

 

moderated Re: Another Winamp Question

Tom Behler
 

Thanks, Bill.

 

I’m learning here!

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Friday, August 9, 2019 7:39 PM
To: main@jfw.groups.io
Subject: Re: Another Winamp Question

 

Hi, Tom. If the USB plugin is in the plugins folder, there’s nothing risky in removing it. I don’t even have it in my plugins folder.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Friday, August 9, 2019 3:54 PM
To: main@jfw.groups.io
Subject: Re: Another Winamp Question

 

Bill:

 

I’m using version 5.666 build 3512.

 

I believe I installed the full version the last time I did so.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Friday, August 9, 2019 5:25 PM
To: main@jfw.groups.io
Subject: Re: Another Winamp Question

 

Hi, Tom. Which version of Winamp are you using? I am using Winamp version 5.66, full, and I am not getting this message.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Friday, August 9, 2019 1:06 PM
To: jfw list
Subject: Another Winamp Question

 

Hello, everyone.

 

Within the past few wekes, whenever I try to play an audio file from my external hard drive with Winamp, I get a message that says something like:  “Winamp has detected a an external drive;  do you want Winamp to access  this drive?”.

 

There is a yes/no button, but I can’t get to it.

 

I have tried enter, and the space bar.  I also have tried rooting the Jaws cursor to the PC cursor, but have had no luck.

 

Occasionally, after trying, I can get the message to play, but then I get an error message about reporting the problem to Winamp.

 

And, once I get these messages, the only way I can get rid of them is to completely shut down and re-boot my computer.

 

Has anyone experienced this issue?  If so, how can I respond, or better yet, how can I turn this anoying notification off?

 

I’m using windows 10 version 1809 with the latest build of Jaws 2019.

 

Thanks!

 

Tom Behler

 

 

moderated Re: Another Winamp Question

Tom Behler
 

Bill:

 

If the problem persists, I might actually uninstall and then reinstall winamp.

 

I do have the executable file for my version here.

 

I’ve never quite understood all of the options that come up in the instalation process, so your suggestions here are very helpful.

 

I’m going to keep them handy.

 

Thanks!

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Friday, August 9, 2019 7:37 PM
To: main@jfw.groups.io
Subject: Re: Another Winamp Question

 

Hi again, Tom. It sounds like when you installed Winamp, you left something checked, when it might have been simpler to uncheck some things. I uncheck Winamp agent, I uncheck the library, and I also uncheck visualization.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Friday, August 9, 2019 3:54 PM
To: main@jfw.groups.io
Subject: Re: Another Winamp Question

 

Bill:

 

I’m using version 5.666 build 3512.

 

I believe I installed the full version the last time I did so.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Friday, August 9, 2019 5:25 PM
To: main@jfw.groups.io
Subject: Re: Another Winamp Question

 

Hi, Tom. Which version of Winamp are you using? I am using Winamp version 5.66, full, and I am not getting this message.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Friday, August 9, 2019 1:06 PM
To: jfw list
Subject: Another Winamp Question

 

Hello, everyone.

 

Within the past few wekes, whenever I try to play an audio file from my external hard drive with Winamp, I get a message that says something like:  “Winamp has detected a an external drive;  do you want Winamp to access  this drive?”.

 

There is a yes/no button, but I can’t get to it.

 

I have tried enter, and the space bar.  I also have tried rooting the Jaws cursor to the PC cursor, but have had no luck.

 

Occasionally, after trying, I can get the message to play, but then I get an error message about reporting the problem to Winamp.

 

And, once I get these messages, the only way I can get rid of them is to completely shut down and re-boot my computer.

 

Has anyone experienced this issue?  If so, how can I respond, or better yet, how can I turn this anoying notification off?

 

I’m using windows 10 version 1809 with the latest build of Jaws 2019.

 

Thanks!

 

Tom Behler

 

 

moderated Re: Another Winamp Question

Bill White
 

Hi, Tom. If the USB plugin is in the plugins folder, there’s nothing risky in removing it. I don’t even have it in my plugins folder.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Friday, August 9, 2019 3:54 PM
To: main@jfw.groups.io
Subject: Re: Another Winamp Question

 

Bill:

 

I’m using version 5.666 build 3512.

 

I believe I installed the full version the last time I did so.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Friday, August 9, 2019 5:25 PM
To: main@jfw.groups.io
Subject: Re: Another Winamp Question

 

Hi, Tom. Which version of Winamp are you using? I am using Winamp version 5.66, full, and I am not getting this message.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Friday, August 9, 2019 1:06 PM
To: jfw list
Subject: Another Winamp Question

 

Hello, everyone.

 

Within the past few wekes, whenever I try to play an audio file from my external hard drive with Winamp, I get a message that says something like:  “Winamp has detected a an external drive;  do you want Winamp to access  this drive?”.

 

There is a yes/no button, but I can’t get to it.

 

I have tried enter, and the space bar.  I also have tried rooting the Jaws cursor to the PC cursor, but have had no luck.

 

Occasionally, after trying, I can get the message to play, but then I get an error message about reporting the problem to Winamp.

 

And, once I get these messages, the only way I can get rid of them is to completely shut down and re-boot my computer.

 

Has anyone experienced this issue?  If so, how can I respond, or better yet, how can I turn this anoying notification off?

 

I’m using windows 10 version 1809 with the latest build of Jaws 2019.

 

Thanks!

 

Tom Behler

 

 

moderated Re: Another Winamp Question

Bill White
 

Hi again, Tom. It sounds like when you installed Winamp, you left something checked, when it might have been simpler to uncheck some things. I uncheck Winamp agent, I uncheck the library, and I also uncheck visualization.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Friday, August 9, 2019 3:54 PM
To: main@jfw.groups.io
Subject: Re: Another Winamp Question

 

Bill:

 

I’m using version 5.666 build 3512.

 

I believe I installed the full version the last time I did so.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Friday, August 9, 2019 5:25 PM
To: main@jfw.groups.io
Subject: Re: Another Winamp Question

 

Hi, Tom. Which version of Winamp are you using? I am using Winamp version 5.66, full, and I am not getting this message.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Friday, August 9, 2019 1:06 PM
To: jfw list
Subject: Another Winamp Question

 

Hello, everyone.

 

Within the past few wekes, whenever I try to play an audio file from my external hard drive with Winamp, I get a message that says something like:  “Winamp has detected a an external drive;  do you want Winamp to access  this drive?”.

 

There is a yes/no button, but I can’t get to it.

 

I have tried enter, and the space bar.  I also have tried rooting the Jaws cursor to the PC cursor, but have had no luck.

 

Occasionally, after trying, I can get the message to play, but then I get an error message about reporting the problem to Winamp.

 

And, once I get these messages, the only way I can get rid of them is to completely shut down and re-boot my computer.

 

Has anyone experienced this issue?  If so, how can I respond, or better yet, how can I turn this anoying notification off?

 

I’m using windows 10 version 1809 with the latest build of Jaws 2019.

 

Thanks!

 

Tom Behler

 

 

moderated Re: Another Winamp Question

Steve Matzura
 

I've discovered an interesting   problem with that version. If I press Shift plus L to open a folder, I can navigate to a folder which I absolutely know contains nearly three hundred folders, but Winamp says there's only one. If I remove  5.666 and reinstall 5.63, it works correctly. Weird, eh?


On 8/9/2019 5:25 PM, Bill White wrote:

Hi, Tom. Which version of Winamp are you using? I am using Winamp version 5.66, full, and I am not getting this message.

 

Bill White


moderated Re: Another Winamp Question

Tom Behler
 

Bill:

 

I’m using version 5.666 build 3512.

 

I believe I installed the full version the last time I did so.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Friday, August 9, 2019 5:25 PM
To: main@jfw.groups.io
Subject: Re: Another Winamp Question

 

Hi, Tom. Which version of Winamp are you using? I am using Winamp version 5.66, full, and I am not getting this message.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Friday, August 9, 2019 1:06 PM
To: jfw list
Subject: Another Winamp Question

 

Hello, everyone.

 

Within the past few wekes, whenever I try to play an audio file from my external hard drive with Winamp, I get a message that says something like:  “Winamp has detected a an external drive;  do you want Winamp to access  this drive?”.

 

There is a yes/no button, but I can’t get to it.

 

I have tried enter, and the space bar.  I also have tried rooting the Jaws cursor to the PC cursor, but have had no luck.

 

Occasionally, after trying, I can get the message to play, but then I get an error message about reporting the problem to Winamp.

 

And, once I get these messages, the only way I can get rid of them is to completely shut down and re-boot my computer.

 

Has anyone experienced this issue?  If so, how can I respond, or better yet, how can I turn this anoying notification off?

 

I’m using windows 10 version 1809 with the latest build of Jaws 2019.

 

Thanks!

 

Tom Behler

 

 

moderated Re: Another Winamp Question

Tom Behler
 

No, I have not done this.

I'm hoping the solution is a bit simpler, but will keep this in mind as
well.

Tom Behler

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Friday, August 9, 2019 5:23 PM
To: main@jfw.groups.io
Subject: Re: Another Winamp Question

have you tried setting the window restriction level to unrestricted when the
JAWS cursor is active?

press the numpad minus to invoke the JAWS cursor and before moving the JAWS
cursor, press and hold down the insert and press r until you hear
"unrestricted" and see if you can locate and left click (numpad slash) the
yes or no button. don't forget to set the window restriction level back to
application window restriction.

-------- Original Message --------
From: Tom Behler [mailto:tombehler@...]
To: jfw list <jfw@groups.io>
Date: Friday, August 9, 2019, 4:05 PM
Subject: Another Winamp Question

Hello, everyone.



Within the past few wekes, whenever I try to play an audio file from my
external hard drive with Winamp, I get a message that says something like:
"Winamp has detected a an external drive; do you want Winamp to access this
drive?".



There is a yes/no button, but I can't get to it.



I have tried enter, and the space bar. I also have tried rooting the Jaws
cursor to the PC cursor, but have had no luck.



Occasionally, after trying, I can get the message to play, but then I get an
error message about reporting the problem to Winamp.



And, once I get these messages, the only way I can get rid of them is to
completely shut down and re-boot my computer.



Has anyone experienced this issue? If so, how can I respond, or better yet,
how can I turn this anoying notification off?



I'm using windows 10 version 1809 with the latest build of Jaws 2019.



Thanks!



Tom Behler

moderated Re: The alt shift f10 issue

David Kingsbury
 

Hello,

It might be that your ribbons are collapsed. Get into the ribbons and hit Control F1. If this then says "ribbons expanded," then they should read correctly again.

David

moderated Re: Another Winamp Question

Steve Matzura
 

I don't have an answer, just another question. What version of Winamp are you using?


On 8/9/2019 4:05 PM, Tom Behler wrote:

Hello, everyone.

 

Within the past few wekes, whenever I try to play an audio file from my external hard drive with Winamp, I get a message that says something like:  “Winamp has detected a an external drive;  do you want Winamp to access  this drive?”.

 

There is a yes/no button, but I can’t get to it.

 

I have tried enter, and the space bar.  I also have tried rooting the Jaws cursor to the PC cursor, but have had no luck.

 

Occasionally, after trying, I can get the message to play, but then I get an error message about reporting the problem to Winamp.

 

And, once I get these messages, the only way I can get rid of them is to completely shut down and re-boot my computer.

 

Has anyone experienced this issue?  If so, how can I respond, or better yet, how can I turn this anoying notification off?

 

I’m using windows 10 version 1809 with the latest build of Jaws 2019.

 

Thanks!

 

Tom Behler


moderated Re: Another Winamp Question

Bill White
 

Hi, Tom. Try the following,

 

In the Winamp program, go to Preferences > Plugins > Portables > look for the USB one, and hit the uninstall button

 

Or with Winamp closed, delete pmp_usb.dll from the Program Files (x86)\Winamp\Plugins folder.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Friday, August 9, 2019 1:06 PM
To: jfw list
Subject: Another Winamp Question

 

Hello, everyone.

 

Within the past few wekes, whenever I try to play an audio file from my external hard drive with Winamp, I get a message that says something like:  “Winamp has detected a an external drive;  do you want Winamp to access  this drive?”.

 

There is a yes/no button, but I can’t get to it.

 

I have tried enter, and the space bar.  I also have tried rooting the Jaws cursor to the PC cursor, but have had no luck.

 

Occasionally, after trying, I can get the message to play, but then I get an error message about reporting the problem to Winamp.

 

And, once I get these messages, the only way I can get rid of them is to completely shut down and re-boot my computer.

 

Has anyone experienced this issue?  If so, how can I respond, or better yet, how can I turn this anoying notification off?

 

I’m using windows 10 version 1809 with the latest build of Jaws 2019.

 

Thanks!

 

Tom Behler

 

 

moderated Re: Another Winamp Question

Bill White
 

Hi, Tom. Which version of Winamp are you using? I am using Winamp version 5.66, full, and I am not getting this message.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Friday, August 9, 2019 1:06 PM
To: jfw list
Subject: Another Winamp Question

 

Hello, everyone.

 

Within the past few wekes, whenever I try to play an audio file from my external hard drive with Winamp, I get a message that says something like:  “Winamp has detected a an external drive;  do you want Winamp to access  this drive?”.

 

There is a yes/no button, but I can’t get to it.

 

I have tried enter, and the space bar.  I also have tried rooting the Jaws cursor to the PC cursor, but have had no luck.

 

Occasionally, after trying, I can get the message to play, but then I get an error message about reporting the problem to Winamp.

 

And, once I get these messages, the only way I can get rid of them is to completely shut down and re-boot my computer.

 

Has anyone experienced this issue?  If so, how can I respond, or better yet, how can I turn this anoying notification off?

 

I’m using windows 10 version 1809 with the latest build of Jaws 2019.

 

Thanks!

 

Tom Behler

 

 

moderated Re: Another Winamp Question

Mario
 

have you tried setting the window restriction level to unrestricted when
the JAWS cursor is active?

press the numpad minus to invoke the JAWS cursor and before moving the
JAWS cursor, press and hold down the insert and press r until you hear
"unrestricted" and see if you can locate and left click (numpad slash)
the yes or no button. don't forget to set the window restriction level
back to application window restriction.

-------- Original Message --------
From: Tom Behler [mailto:tombehler@...]
To: jfw list <jfw@groups.io>
Date: Friday, August 9, 2019, 4:05 PM
Subject: Another Winamp Question

Hello, everyone.



Within the past few wekes, whenever I try to play an audio file from my
external hard drive with Winamp, I get a message that says something like:
"Winamp has detected a an external drive; do you want Winamp to access
this drive?".



There is a yes/no button, but I can't get to it.



I have tried enter, and the space bar. I also have tried rooting the Jaws
cursor to the PC cursor, but have had no luck.



Occasionally, after trying, I can get the message to play, but then I get an
error message about reporting the problem to Winamp.



And, once I get these messages, the only way I can get rid of them is to
completely shut down and re-boot my computer.



Has anyone experienced this issue? If so, how can I respond, or better yet,
how can I turn this anoying notification off?



I'm using windows 10 version 1809 with the latest build of Jaws 2019.



Thanks!



Tom Behler

moderated Another Winamp Question

Tom Behler
 

Hello, everyone.

 

Within the past few wekes, whenever I try to play an audio file from my external hard drive with Winamp, I get a message that says something like:  “Winamp has detected a an external drive;  do you want Winamp to access  this drive?”.

 

There is a yes/no button, but I can’t get to it.

 

I have tried enter, and the space bar.  I also have tried rooting the Jaws cursor to the PC cursor, but have had no luck.

 

Occasionally, after trying, I can get the message to play, but then I get an error message about reporting the problem to Winamp.

 

And, once I get these messages, the only way I can get rid of them is to completely shut down and re-boot my computer.

 

Has anyone experienced this issue?  If so, how can I respond, or better yet, how can I turn this anoying notification off?

 

I’m using windows 10 version 1809 with the latest build of Jaws 2019.

 

Thanks!

 

Tom Behler