moderated
Re: Excel Formula
Russell Solowoniuk
Hi Richard,
toggle quoted messageShow quoted text
I think I have “smart quotes” in my instructions. I typed the instructions from Mail on my iMac, and, when I read your quotes VoiceOver reads Quote yes quote and in my instructions, VoiceOver reads right double quote Yes right double quote. Yes, it reads right double quote for both! :) Thanks Mario for catching the differences, and apology Richard! Russell
On Jun 26, 2019, at 11:02 AM, Richard Turner <richardturner42@...> wrote:




moderated
Re: Excel Formula
Richard Turner
I know what they are, but you did not say if Russell had smart quotes or if I had smart quotes.
toggle quoted messageShow quoted text
I'm blind and Jaws said the exact same thing in reading both versions. You stated pretty straight forwardly that the smart quotes was the issue... Not helpful unless we know which version had the smart quotes. Thanks, Richard Check out my web site at: www.turner42.com “The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying. There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss." Douglas Adams, from Life, The Universe and Everything, p.59
Original Message
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario Sent: Wednesday, June 26, 2019 9:58 AM To: main@jfw.groups.io Subject: Re: Excel Formula left quotes and right quotes ar smart quotes. for example, left quote, I said that, right quote. the quotes are rarely referred to as curly quotes. the left quote is actually like or close to a smaller left parenthesis with a water droplet on the top half of the symbol pointing down, and the right quote is a smaller version of the right parenthesis with a water droplet at the bottom half of the symbol pointing up. in both symbols, the water droplet is a part of the left or right small parenthesis. the concept is, the left quote marks the opening to what someone said, and the right quote is the closing of what someone said.  Original Message  From: Richard Turner [mailto:richardturner42@...] To: main@jfw.groups.io <main@jfw.groups.io> Date: Wednesday, June 26, 2019, 12:30 PM Subject: Excel Formula So Mario, which one has smart quotes? Jaws speaks them the same to me. Richard Check out my web site at: https://nam01.safelinks.protection.outlook.com/?url=www.turner42.com&data=02%7C01%7C%7C57cb9d9db0d04a5c3f6708d6fa57650d%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636971650591002154&sdata=7i9qEP%2FCUNz71CxoI3cjdNbH5jXkDEIU4XETbocdmks%3D&reserved=0 “The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying. There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss." Douglas Adams, from Life, The Universe and Everything, p.59 Original Message From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario Sent: Wednesday, June 26, 2019 9:24 AM To: main@jfw.groups.io Subject: Re: Excel Formula the smart quotes instead of strait quotes makes the difference. crazy, isn't it? but true, watch out for these idiosyncrasies.  Original Message  From: Richard Turner [mailto:richardturner42@...] To: main@jfw.groups.io <main@jfw.groups.io> Date: Wednesday, June 26, 2019, 12:02 PM Subject: Excel Formula I’m not sure why Russell’s instructions didn’t work for me, but I did the following and it worked. In b101: =COUNTIF(B2:B100,"Yes") IN b102, =COUNTA(B2:B100) In b103, =B101/B102 To test this, I put a Yes in b2 and No in b100. I got 1 as the result of yes’s, 2 in the result for number of cells with data in b102, and .50 in b103 which then switching the number type to percent, got 50.00. I did not bother changing the decimal places from the default. HTH, Richard Check out my web site at: https://nam01.safelinks.protection.outlook.com/?url=www.turner42.com&data=02%7C01%7C%7C57cb9d9db0d04a5c3f6708d6fa57650d%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636971650591002154&sdata=7i9qEP%2FCUNz71CxoI3cjdNbH5jXkDEIU4XETbocdmks%3D&reserved=0<https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42.com&data=02%7C01%7C%7C57cb9d9db0d04a5c3f6708d6fa57650d%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636971650591002154&sdata=oO3mhEA78GdSJnFW5qzx%2BYYEqmYsU585yjesDnuvKWU%3D&reserved=0> “The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying. There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss." Douglas Adams, from Life, The Universe and Everything, p.59 From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Russell Solowoniuk Sent: Wednesday, June 26, 2019 7:53 AM To: main@jfw.groups.io Subject: Re: Excel Formula Hi Steve, Let’s say you have Yes or no in cells B2 to B100. In cell B101, or wherever you wish, type the formula, CountIf(B2:B100,”Yes”). This will give you the number of cells with “Yes” in them. Then, in B102, or whoever you wish, type the formula, =CountA(B2:B100) Note the letter “A” after “Count” in the above formula. This will give you the total number of cells in column B that have data. Now, to calculate the percentage of cells with “Yes” in them, in cell B103, or wherever, type the formula, =B101/B102 You are dividing the number of “Yes” by the total number of cells with data. You will get a number like 0.67 or something like that. Press CTRL + 1 while in that cell and change the number formatting to Percentage, choose the number of decimal places you wish to show, and tab to OK. Hope this helps. Russell On Jun 25, 2019, at 5:17 PM, Steve & Shannon Cook <cookcafe@...<mailto:cookcafe@...>> wrote: Hi All, Using Excel 2016, Windows 10 and the current version of JAWS. I have an Excel sheet in column A I have the task a person must perform. In Column B I will answer yes or no if they can perform the task. Here is my issue, I want to create a formula at the bottom of column B to determine if they answered yes to 80% of the questions. I would greatly appreciate your assistance! Steve




moderated
Re: Excel Formula
Mario
left quotes and right quotes ar smart quotes. for example, left quote, I
toggle quoted messageShow quoted text
said that, right quote. the quotes are rarely referred to as curly quotes. the left quote is actually like or close to a smaller left parenthesis with a water droplet on the top half of the symbol pointing down, and the right quote is a smaller version of the right parenthesis with a water droplet at the bottom half of the symbol pointing up. in both symbols, the water droplet is a part of the left or right small parenthesis. the concept is, the left quote marks the opening to what someone said, and the right quote is the closing of what someone said.
 Original Message 
From: Richard Turner [mailto:richardturner42@...] To: main@jfw.groups.io <main@jfw.groups.io> Date: Wednesday, June 26, 2019, 12:30 PM Subject: Excel Formula So Mario, which one has smart quotes? Jaws speaks them the same to me. Richard Check out my web site at: www.turner42.com “The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying. There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss." Douglas Adams, from Life, The Universe and Everything, p.59 Original Message From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario Sent: Wednesday, June 26, 2019 9:24 AM To: main@jfw.groups.io Subject: Re: Excel Formula the smart quotes instead of strait quotes makes the difference. crazy, isn't it? but true, watch out for these idiosyncrasies.  Original Message  From: Richard Turner [mailto:richardturner42@...] To: main@jfw.groups.io <main@jfw.groups.io> Date: Wednesday, June 26, 2019, 12:02 PM Subject: Excel Formula I’m not sure why Russell’s instructions didn’t work for me, but I did the following and it worked. In b101: =COUNTIF(B2:B100,"Yes") IN b102, =COUNTA(B2:B100) In b103, =B101/B102 To test this, I put a Yes in b2 and No in b100. I got 1 as the result of yes’s, 2 in the result for number of cells with data in b102, and .50 in b103 which then switching the number type to percent, got 50.00. I did not bother changing the decimal places from the default. HTH, Richard Check out my web site at: https://eur02.safelinks.protection.outlook.com/?url=www.turner42.com&data=02%7C01%7C%7C0d3d893b497f40b286ef08d6fa52afb0%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636971630370466862&sdata=t4P9ngoprfyq5VkbYdTfOzNj8%2FyhMepM2dlNI0nWQVQ%3D&reserved=0<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42.com&data=02%7C01%7C%7C0d3d893b497f40b286ef08d6fa52afb0%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636971630370466862&sdata=wSbsazxpgdNeSTKDzjt9QKMsjIz8fSIlQexyjLq%2BEcE%3D&reserved=0> “The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying. There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss." Douglas Adams, from Life, The Universe and Everything, p.59 From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Russell Solowoniuk Sent: Wednesday, June 26, 2019 7:53 AM To: main@jfw.groups.io Subject: Re: Excel Formula Hi Steve, Let’s say you have Yes or no in cells B2 to B100. In cell B101, or wherever you wish, type the formula, CountIf(B2:B100,”Yes”). This will give you the number of cells with “Yes” in them. Then, in B102, or whoever you wish, type the formula, =CountA(B2:B100) Note the letter “A” after “Count” in the above formula. This will give you the total number of cells in column B that have data. Now, to calculate the percentage of cells with “Yes” in them, in cell B103, or wherever, type the formula, =B101/B102 You are dividing the number of “Yes” by the total number of cells with data. You will get a number like 0.67 or something like that. Press CTRL + 1 while in that cell and change the number formatting to Percentage, choose the number of decimal places you wish to show, and tab to OK. Hope this helps. Russell On Jun 25, 2019, at 5:17 PM, Steve & Shannon Cook <cookcafe@...<mailto:cookcafe@...>> wrote: Hi All, Using Excel 2016, Windows 10 and the current version of JAWS. I have an Excel sheet in column A I have the task a person must perform. In Column B I will answer yes or no if they can perform the task. Here is my issue, I want to create a formula at the bottom of column B to determine if they answered yes to 80% of the questions. I would greatly appreciate your assistance! Steve




moderated
Re: Excel Formula
Richard Turner
So Mario, which one has smart quotes?
toggle quoted messageShow quoted text
Jaws speaks them the same to me. Richard Check out my web site at: www.turner42.com “The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying. There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss." Douglas Adams, from Life, The Universe and Everything, p.59
Original Message
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario Sent: Wednesday, June 26, 2019 9:24 AM To: main@jfw.groups.io Subject: Re: Excel Formula the smart quotes instead of strait quotes makes the difference. crazy, isn't it? but true, watch out for these idiosyncrasies.  Original Message  From: Richard Turner [mailto:richardturner42@...] To: main@jfw.groups.io <main@jfw.groups.io> Date: Wednesday, June 26, 2019, 12:02 PM Subject: Excel Formula I’m not sure why Russell’s instructions didn’t work for me, but I did the following and it worked. In b101: =COUNTIF(B2:B100,"Yes") IN b102, =COUNTA(B2:B100) In b103, =B101/B102 To test this, I put a Yes in b2 and No in b100. I got 1 as the result of yes’s, 2 in the result for number of cells with data in b102, and .50 in b103 which then switching the number type to percent, got 50.00. I did not bother changing the decimal places from the default. HTH, Richard Check out my web site at: https://eur02.safelinks.protection.outlook.com/?url=www.turner42.com&data=02%7C01%7C%7C0d3d893b497f40b286ef08d6fa52afb0%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636971630370466862&sdata=t4P9ngoprfyq5VkbYdTfOzNj8%2FyhMepM2dlNI0nWQVQ%3D&reserved=0<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42.com&data=02%7C01%7C%7C0d3d893b497f40b286ef08d6fa52afb0%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636971630370466862&sdata=wSbsazxpgdNeSTKDzjt9QKMsjIz8fSIlQexyjLq%2BEcE%3D&reserved=0> “The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying. There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss." Douglas Adams, from Life, The Universe and Everything, p.59 From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Russell Solowoniuk Sent: Wednesday, June 26, 2019 7:53 AM To: main@jfw.groups.io Subject: Re: Excel Formula Hi Steve, Let’s say you have Yes or no in cells B2 to B100. In cell B101, or wherever you wish, type the formula, CountIf(B2:B100,”Yes”). This will give you the number of cells with “Yes” in them. Then, in B102, or whoever you wish, type the formula, =CountA(B2:B100) Note the letter “A” after “Count” in the above formula. This will give you the total number of cells in column B that have data. Now, to calculate the percentage of cells with “Yes” in them, in cell B103, or wherever, type the formula, =B101/B102 You are dividing the number of “Yes” by the total number of cells with data. You will get a number like 0.67 or something like that. Press CTRL + 1 while in that cell and change the number formatting to Percentage, choose the number of decimal places you wish to show, and tab to OK. Hope this helps. Russell On Jun 25, 2019, at 5:17 PM, Steve & Shannon Cook <cookcafe@...<mailto:cookcafe@...>> wrote: Hi All, Using Excel 2016, Windows 10 and the current version of JAWS. I have an Excel sheet in column A I have the task a person must perform. In Column B I will answer yes or no if they can perform the task. Here is my issue, I want to create a formula at the bottom of column B to determine if they answered yes to 80% of the questions. I would greatly appreciate your assistance! Steve




moderated
Re: Excel Formula
Mario
the smart quotes instead of strait quotes makes the difference.
toggle quoted messageShow quoted text
crazy, isn't it? but true, watch out for these idiosyncrasies.
 Original Message 
From: Richard Turner [mailto:richardturner42@...] To: main@jfw.groups.io <main@jfw.groups.io> Date: Wednesday, June 26, 2019, 12:02 PM Subject: Excel Formula I’m not sure why Russell’s instructions didn’t work for me, but I did the following and it worked. In b101: =COUNTIF(B2:B100,"Yes") IN b102, =COUNTA(B2:B100) In b103, =B101/B102 To test this, I put a Yes in b2 and No in b100. I got 1 as the result of yes’s, 2 in the result for number of cells with data in b102, and .50 in b103 which then switching the number type to percent, got 50.00. I did not bother changing the decimal places from the default. HTH, Richard Check out my web site at: www.turner42.com<http://www.turner42.com> “The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying. There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss." Douglas Adams, from Life, The Universe and Everything, p.59 From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Russell Solowoniuk Sent: Wednesday, June 26, 2019 7:53 AM To: main@jfw.groups.io Subject: Re: Excel Formula Hi Steve, Let’s say you have Yes or no in cells B2 to B100. In cell B101, or wherever you wish, type the formula, CountIf(B2:B100,”Yes”). This will give you the number of cells with “Yes” in them. Then, in B102, or whoever you wish, type the formula, =CountA(B2:B100) Note the letter “A” after “Count” in the above formula. This will give you the total number of cells in column B that have data. Now, to calculate the percentage of cells with “Yes” in them, in cell B103, or wherever, type the formula, =B101/B102 You are dividing the number of “Yes” by the total number of cells with data. You will get a number like 0.67 or something like that. Press CTRL + 1 while in that cell and change the number formatting to Percentage, choose the number of decimal places you wish to show, and tab to OK. Hope this helps. Russell On Jun 25, 2019, at 5:17 PM, Steve & Shannon Cook <cookcafe@...<mailto:cookcafe@...>> wrote: Hi All, Using Excel 2016, Windows 10 and the current version of JAWS. I have an Excel sheet in column A I have the task a person must perform. In Column B I will answer yes or no if they can perform the task. Here is my issue, I want to create a formula at the bottom of column B to determine if they answered yes to 80% of the questions. I would greatly appreciate your assistance! Steve




moderated
Re: Excel Formula
Russell Solowoniuk
Hi Richard,
toggle quoted messageShow quoted text
I see no difference in my steps and yours? :) Thanks, Russell




moderated
Re: Excel Formula
Richard Turner
I’m not sure why Russell’s instructions didn’t work for me, but I did the following and it worked. In b101: =COUNTIF(B2:B100,"Yes") IN b102, =COUNTA(B2:B100) In b103, =B101/B102
To test this, I put a Yes in b2 and No in b100. I got 1 as the result of yes’s, 2 in the result for number of cells with data in b102, and .50 in b103 which then switching the number type to percent, got 50.00. I did not bother changing the decimal places from the default.
HTH, Richard
Check out my web site at: www.turner42.com “The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying. There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss." Douglas Adams, from Life, The Universe and Everything, p.59
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
Russell Solowoniuk
Sent: Wednesday, June 26, 2019 7:53 AM To: main@jfw.groups.io Subject: Re: Excel Formula
Hi Steve,
Let’s say you have Yes or no in cells B2 to B100. In cell B101, or wherever you wish, type the formula, CountIf(B2:B100,”Yes”). This will give you the number of cells with “Yes” in them. Then, in B102, or whoever you wish, type the formula, =CountA(B2:B100) Note the letter “A” after “Count” in the above formula. This will give you the total number of cells in column B that have data. Now, to calculate the percentage of cells with “Yes” in them, in cell B103, or wherever, type the formula, =B101/B102 You are dividing the number of “Yes” by the total number of cells with data. You will get a number like 0.67 or something like that. Press CTRL + 1 while in that cell and change the number formatting to Percentage, choose the number of decimal places you wish to show, and tab to OK.
Hope this helps.
Russell




moderated
Re: Excel Formula
Van Lant, Robin
I agree with Russell’s approach. That is exactly how I would do it. Technically you can combine both of the formulas into one cell, but I tend to like to show the results of each count in a different cell.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
Russell Solowoniuk
Sent: Wednesday, June 26, 2019 8:53 AM To: main@jfw.groups.io Subject: Re: Excel Formula
Hi Steve,
Let’s say you have Yes or no in cells B2 to B100. In cell B101, or wherever you wish, type the formula, CountIf(B2:B100,”Yes”). This will give you the number of cells with “Yes” in them. Then, in B102, or whoever you wish, type the formula, =CountA(B2:B100) Note the letter “A” after “Count” in the above formula. This will give you the total number of cells in column B that have data. Now, to calculate the percentage of cells with “Yes” in them, in cell B103, or wherever, type the formula, =B101/B102 You are dividing the number of “Yes” by the total number of cells with data. You will get a number like 0.67 or something like that. Press CTRL + 1 while in that cell and change the number formatting to Percentage, choose the number of decimal places you wish to show, and tab to OK.
Hope this helps.
Russell
This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the GrammLeachBliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information. 127 Public Square, Cleveland, OH 44114




moderated
Using Skype
Justin Mcdevitt
Hello Listmembers,
I have scheduled a training session (via Skype) with a BrailleNote user for tomorrow to provide some training in using the Apex which I recently purchased, primarily as a Notetaker. I am reaching out to the list to request some assistance with using Skype, a program that I haven’t used in a number of years. I have set up a Skype account and downloaded the Windows 10 desktop version of Skype and reviewed the JAWS/Skype keyboard commands. What I would appreciate is the opportunity to review some of these commands and get some direction in adding a contact and setting up a Skype session to participate in this Apex training, again scheduled for tomorrow. If anyone, who is familiar with Skype has some time today to provide some direction, I would appreciate it. Please contact me offlist: jhmcdev@....
Best, Justin .




moderated
Re: Excel Formula
Russell Solowoniuk
Hi Steve,
toggle quoted messageShow quoted text
Let’s say you have Yes or no in cells B2 to B100. In cell B101, or wherever you wish, type the formula, CountIf(B2:B100,”Yes”). This will give you the number of cells with “Yes” in them. Then, in B102, or whoever you wish, type the formula, =CountA(B2:B100) Note the letter “A” after “Count” in the above formula. This will give you the total number of cells in column B that have data. Now, to calculate the percentage of cells with “Yes” in them, in cell B103, or wherever, type the formula, =B101/B102 You are dividing the number of “Yes” by the total number of cells with data. You will get a number like 0.67 or something like that. Press CTRL + 1 while in that cell and change the number formatting to Percentage, choose the number of decimal places you wish to show, and tab to OK. Hope this helps. Russell




moderated
Netflix keyboard navigation with JAWS.
Tim Ford
Can anyone provide a list of the video navigation commands I can use to operate a Netflix video? I managed to figure out somehow to pause and play. But I find no links or buttons of any kind. Any hints are much appreciated!
Tim Ford




moderated
Re: Is there a group for accessibility issues regarding Wordpress?
Rayn Darren
Hi Richard, I don't have the answer to your question directly Richard, however, i use WordPress daily for my clients and would be happy to answer questions you have. Thanks, Sarah
On 6/25/2019 10:23 AM, Richard B.
McDonald wrote:




moderated
Fire fox Tutorial
Kevin Stone <kevinstone65@...>
Does anyone know of a tutorial for fire fox? Thanks in advance
Kevin Stone




moderated
Re: Is there a group for accessibility issues regarding Wordpress?
Randy Barnett
It is still active but very low
traffic.
On 6/25/2019 12:12 PM, The Iowa Gal
wrote:




moderated
Re: Excel Formula
Tanguy LOHEAC
Hi Steve, Sorry, i'm French, then I don't know exact function names in English. But i'll try to guide to the right path: To get the number of "yes" from column B the formula is something
like that =nb.if(b2:b10;"yes") where b2:b10 is the range of rows you want to sum and "yes" is what you want to sum. Then, to get the total number of tasks that are in column A this is: =sub.total(3;a:a)1 : here i'm not sure about the name but you may find it from the Math category. Then fi you want a percentage this is first divided by second as follows: =nb.if(b2:b10;"yes") / (sub.total(3;a:a)1)
Hope that helps anyway Tanguy
Le 26/06/2019 à 01:17, Steve &
Shannon Cook a écrit :





moderated
Excel Formula
Steve & Shannon Cook <cookcafe@...>
Hi All,
Using Excel 2016, Windows 10 and the current version of JAWS. I have an Excel sheet in column A I have the task a person must perform. In Column B I will answer yes or no if they can perform the task. Here is my issue, I want to create a formula at the bottom of column B to determine if they answered yes to 80% of the questions. I would greatly appreciate your assistance!
Steve




moderated
Re: dropbox and accessibility
Bill White
Hi, Jed. Make sure your Dropbox folder hasn't switched to Tiles View. Try left and right arrows and see if it gives you your file listing.
toggle quoted messageShow quoted text
Bill White billwhite92701@...
Original Message
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Jed Barton Sent: Tuesday, June 25, 2019 10:33 AM To: main Subject: dropbox and accessibility Hey guys, OK, so has dropbox gone to not being accessible? The app seems to have changed completely. I can't seem ot arrow down through y files. I'm using the latest jaws. Can someone help? Cheers, Jed




moderated
Re: Is there a group for accessibility issues regarding Wordpress?
David & his pack of dogs
Contact Mystic access. They have a word press group that deals with issues.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Homuth
Sent: June 25, 2019 11:14 AM To: main@jfw.groups.io Subject: Re: Is there a group for accessibility issues regarding Wordpress?
As far as I’m aware there isn’t, but if it’s an issue particular to JAWS you can always bring it up on this list. Plenty of Wordpress users here.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard B. McDonald
Hi!
At wordpress.com, there is an accessibility support group. However, I have found it nonresponsive and inactive. So, I am wondering if there is some other support group for accessibility issues such as using a screen reader with WordPress?
Thanks, Richard




moderated
Re: dropbox and accessibility
CJ &AA MAY
Me too.
toggle quoted messageShow quoted text
Alison
Original Message
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dean Martineau Sent: 25 June 2019 18:44 To: main@jfw.groups.io Subject: Re: dropbox and accessibility I use File Explorer to access the Dropbox folder and it works fine still. Dean Original Message From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jed Barton Sent: Tuesday, June 25, 2019 1:33 PM To: main <main@jfw.groups.io> Subject: dropbox and accessibility Hey guys, OK, so has dropbox gone to not being accessible? The app seems to have changed completely. I can't seem ot arrow down through y files. I'm using the latest jaws. Can someone help? Cheers, Jed




moderated
Re: Help with reading DWM notification
Shirley Tracy
Thanks, Dan:
Yes, I have a Dell desktop. The notice finally went away when I rebooted.
Shirley Tracy
From: Dan Longmore
Sent: Tuesday, June 25, 2019 12:31 PM To: main@jfw.groups.io Subject: Re: Help with reading DWM notification
I have a Dell laptop, get the same issue, actually there is nothing on the screen and nothing to clear. We both always takes this away and it has something to do with Dell proprietary software.
Get Outlook for iOS
From: main@jfw.groups.io on behalf of Shirley Tracy <shirleytracy16@...>
I keep getting DWM notification. How to read and/or clear it.
Thanks for any help.
Shirley Tracy
From: Richard Turner
Are you talking just marking to then copy, or cut? Those keystrokes also work on the web and you follow the insert+space m with the copy command, control+c, etc.
Richard
Check out my web site at: www.turner42.com “The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying. There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss." Douglas Adams, from Life, The Universe and Everything, p.59
Original Message From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dean Martineau Sent: Tuesday, June 25, 2019 4:26 AM To: main@jfw.groups.io Subject: Re: Marking text.
Yes, you can use JAWS commands to mark blocks of text. All screen readers have this capability now.
In the forthcoming book Windows Keyboard Power User Guide, which should actually finally appear in the next couple weeks, I show you how to create a better set of keystrokes to do this, but until then:
Go to the beginning of the block you want to set and press ctrl+windows+K.
Go to the end of the block and press Jawskey+space, M.
Original Message From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of lists@... Sent: Tuesday, June 25, 2019 6:46 AM To: main@jfw.groups.io Subject: Marking text.
Hi all.
Can anyone tell me, if the beginning and end of a block of text, can be marked using Jaws only? Using Microsoft word.
Many thanks.
Brian.


