Date   

Re: Jaws updates

Michael Munn
 

They will keep it updated for one more year before they drop the support for it.
Thanks 
Best regards 
Michael Munn


Re: Jaws updates

JM Casey
 

They usually keep updating the previous version for at least another year after the next one comes out. They had to keep updating 2018 because they promised this version would work with Firefox Quantum -- it didn't, at least not initially. Now I guess the Amazon issue was deemed to be a bit enough deal.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Don H
Sent: May 28, 2019 3:32 PM
To: main@jfw.groups.io
Subject: Jaws updates

How long does FS keep updating older versions of Jaws? Just surprised to see 2018 updates when 2019 is the current version.


Jaws updates

Don H
 

How long does FS keep updating older versions of Jaws?  Just surprised to see 2018 updates when 2019 is the current version.


Re: J2018 Build Update 1811.30 + What's New

mcLeod stinnett
 

--
from, mack I plan to update to jaws 2019 when the last update comes out. after that I will have no more SMA's. does the last update come out in November. also, I assume the current 2018 update will also be included.


Re: jaws cursor follows the pc cursor

netbat66
 

it is not turning off permanently.
i found out it is doing this globally. no matter what program i am running when i reload jaws 2019 , it will be on.
there must be a setting in the default script file i have to change but i don't know what to look for.

-----Original Message-----
From: Mike B
Sent: Tuesday, May 28, 2019 11:40 AM
To: main@jfw.groups.io
Subject: Re: jaws cursor follows the pc cursor


The keystroke should turn it off permanently until the keystroke is pressed again to turn it on.

Take care. Mike. Sent from my iBarstool. Go dodgers!
No one has more to say than the woman who says she doesn't want to talk about it.
----- Original Message -----
From: netbat66
To: main@jfw.groups.io
Sent: Tuesday, May 28, 2019 11:34 AM
Subject: Re: jaws cursor follows the pc cursor

thanks, but i want to know how to perminently turn it off so it is not on every
time i load jaws.
i know how to turn it off but how do i permanently turn it off?

-----Original Message-----
From: Mike B
Sent: Tuesday, May 28, 2019 10:25 AM
To: main@jfw.groups.io
Subject: Re: jaws cursor follows the pc cursor


Hi Net bat,

Press, Insert, Control + Numpad minus / Jaws cursor key. This keystroke is a
toggle so it'll turn this feature both on and off.

Take care. Mike. Sent from my iBarstool. Go dodgers!
No one has more to say than the woman who says she doesn't want to talk about
it.
----- Original Message -----
From: netbat66
To: jaws main
Sent: Tuesday, May 28, 2019 10:09 AM
Subject: jaws cursor follows the pc cursor

hi,
some how this option is turned on. it only does this when i open the jaws
options menu. how do i turn this off? i haven't found where to go to turn this
option off.
as it is i have to turn this off before i can do anything in the options menu.
thanks.


There's amazing intelligence in the Universe.
You can tell because none of them ever called Earth.


Re: jaws cursor follows the pc cursor

Mike B.
 


The keystroke should turn it off permanently until the keystroke is pressed again to turn it on.

Take care.  Mike.  Sent from my iBarstool.  Go dodgers!
No one has more to say than the woman who says she doesn't want to talk about it. 

----- Original Message -----
From: netbat66
Sent: Tuesday, May 28, 2019 11:34 AM
Subject: Re: jaws cursor follows the pc cursor

thanks, but i want to know how to perminently turn it off so it is not on every
time i load jaws.
i know how to turn it off but how do i permanently turn it off?

-----Original Message-----
From: Mike B
Sent: Tuesday, May 28, 2019 10:25 AM
To: main@jfw.groups.io
Subject: Re: jaws cursor follows the pc cursor


Hi Net bat,

Press, Insert, Control + Numpad minus / Jaws cursor key.  This keystroke is a
toggle so it'll turn this feature both on and off.

Take care.  Mike.  Sent from my iBarstool.  Go dodgers!
No one has more to say than the woman who says she doesn't want to talk about
it.
----- Original Message -----
From: netbat66
To: jaws main
Sent: Tuesday, May 28, 2019 10:09 AM
Subject: jaws cursor follows the pc cursor

    hi,
some how  this option is turned on. it only does this when i open the jaws
options menu. how do i turn this off? i haven't found where to go to turn this
option off.
as it is i have to turn this off before i can do anything in the options menu.
thanks.


There's amazing intelligence in the Universe.
You can tell because none of them ever called Earth.




 




Re: jaws cursor follows the pc cursor

netbat66
 

thanks, but i want to know how to perminently turn it off so it is not on every time i load jaws.
i know how to turn it off but how do i permanently turn it off?

-----Original Message-----
From: Mike B
Sent: Tuesday, May 28, 2019 10:25 AM
To: main@jfw.groups.io
Subject: Re: jaws cursor follows the pc cursor


Hi Net bat,

Press, Insert, Control + Numpad minus / Jaws cursor key. This keystroke is a toggle so it'll turn this feature both on and off.

Take care. Mike. Sent from my iBarstool. Go dodgers!
No one has more to say than the woman who says she doesn't want to talk about it.
----- Original Message -----
From: netbat66
To: jaws main
Sent: Tuesday, May 28, 2019 10:09 AM
Subject: jaws cursor follows the pc cursor

hi,
some how this option is turned on. it only does this when i open the jaws
options menu. how do i turn this off? i haven't found where to go to turn this
option off.
as it is i have to turn this off before i can do anything in the options menu.
thanks.


There's amazing intelligence in the Universe.
You can tell because none of them ever called Earth.


Re: How to read tool tip with Jaws

Mike B.
 


Hi Bill,
 
I'm sure it's a typo or you haven't had enough coffee yet but, you need to open the Settings Center 1st with, Insert + 6, be fore you can open the default all applications with, Control, Shift + D.

Take care.  Mike.  Sent from my iBarstool.  Go dodgers!
No one has more to say than the woman who says she doesn't want to talk about it. 

----- Original Message -----
From: Bill White
Sent: Tuesday, May 28, 2019 7:52 AM
Subject: Re: How to read tool tip with Jaws

Hi, Swati. To set reading of tool tip,

1. If you want the tool tips to be read, no matter which program is open, Press CONTROL plus SHIFT plus D to load the default JAWS script.
2. Press JAWS key plus the number six on the numbers row, to open Settings Center.
3. Arrow down to Speech Verbocity, and open with Right Arrow.
4. Arrow down to Configure Verbocity levels, and open with Right Arrow.
5. Tool Tip will be the last item in the check boxes to be checked.

Bill White
billwhite92701@...

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Swati Sinha
Sent: Tuesday, May 28, 2019 12:32 AM
To: main
Subject: How to read tool tip with Jaws

Hi all,
As the subject line suggests, I would like to know how to read tooltip
of a control with the help of jaws 2019.
In previous versions, one can enable tooltip from quick settings and
jaws was good to go.
But in the latest version 2019, I am unable to find it in the settings.
Please help.
 -
when things don't seem to be going your way, always know that God has
a plan for you. If you place your trust in Him, He will give you great
gifts. We don't always know what God's plans are for us. We just know
that His ways are not our ways, but His ways are always best.









Re: jaws cursor follows the pc cursor

Mike B.
 

Hi Net bat,
 
Press, Insert, Control + Numpad minus / Jaws cursor key.  This keystroke is a toggle so it'll turn this feature both on and off.

Take care.  Mike.  Sent from my iBarstool.  Go dodgers!
No one has more to say than the woman who says she doesn't want to talk about it. 

----- Original Message -----
From: netbat66
Sent: Tuesday, May 28, 2019 10:09 AM
Subject: jaws cursor follows the pc cursor

    hi,
some how  this option is turned on. it only does this when i open the jaws
options menu. how do i turn this off? i haven't found where to go to turn this
option off.
as it is i have to turn this off before i can do anything in the options menu.
thanks.


There's amazing intelligence in the Universe.
You can tell because none of them ever called Earth.




Re: goldwave scripts not working properly

Richard Turner
 

Mario,
I believe I have the same scripts, but they are in the folder:
"C:\ProgramData\Freedom Scientific\JAWS\2019\Scripts\enu\"

I confirmed this by opening the Jaws menu, then on the utilities menu, explore utilities, then explore scripts, which is where I confirmed that path, and the scripts work fine for me.

Richard



Check out my web site at: www.turner42.com
“The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying. There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss." --Douglas Adams, from Life, The Universe and Everything, p.59

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Tuesday, May 28, 2019 8:27 AM
To: main@jfw.groups.io
Subject: goldwave scripts not working properly

the file that I downloaded is goldwave_5-6_jaws_scripts_2_0.zip and after extracting the files and copying them to the appropriate location (see below), when I check the script version, it is 1.6. does anyone have the latest scripts for Goldwave, or direct me where to get them?

in the meantime, I have copied all of the files to the following folder:

"C:\Users\Mario\AppData\Roaming\Freedom Scientific\JAWS\2018\Settings\enu\"

but when I attempt to select a choice in an edit combo, I cannot simply arrow down or up to different choices unless I press alt+down arrow to open the dialog, arrow to the spoken choice, and press alt+up arrow before I can preview the change. I did not have to do this previously when I had JAWS 16. now that I use 2018, what can I do to fix this dilemma?


jaws cursor follows the pc cursor

netbat66
 

hi,
some how this option is turned on. it only does this when i open the jaws options menu. how do i turn this off? i haven't found where to go to turn this option off.
as it is i have to turn this off before i can do anything in the options menu.
thanks.


There's amazing intelligence in the Universe.
You can tell because none of them ever called Earth.


goldwave scripts not working properly

Mario
 

the file that I downloaded is goldwave_5-6_jaws_scripts_2_0.zip and
after extracting the files and copying them to the appropriate location
(see below), when I check the script version, it is 1.6. does anyone
have the latest scripts for Goldwave, or direct me where to get them?

in the meantime, I have copied all of the files to the following folder:

"C:\Users\Mario\AppData\Roaming\Freedom Scientific\JAWS\2018\Settings\enu\"

but when I attempt to select a choice in an edit combo, I cannot simply
arrow down or up to different choices unless I press alt+down arrow to
open the dialog, arrow to the spoken choice, and press alt+up arrow
before I can preview the change. I did not have to do this previously
when I had JAWS 16. now that I use 2018, what can I do to fix this dilemma?


Re: How to read tool tip with Jaws

Bill White <billwhite92701@...>
 

Hi again Swati. I left out a step in my last message. I will restate how to turn on tool tips.

Hi, Swati. To set reading of tool tip,

1. If you want the tool tips to be read, no matter which program is open, Press CONTROL plus SHIFT plus D to load the default JAWS script.
2. Press JAWS key plus the number six on the numbers row, to open Settings Center.
3. Arrow down to Speech Verbocity, and open with Right Arrow.
4. Arrow down to Configure Verbocity levels, and open with Right Arrow.
5. Choose which level of verbocity you wish to configure by arrowing to it, then press SPACE BAR to configure.
6. Tool Tip will be the last item in the check boxes to be checked.

Bill White
billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Swati Sinha
Sent: Tuesday, May 28, 2019 12:32 AM
To: main
Subject: How to read tool tip with Jaws

Hi all,
As the subject line suggests, I would like to know how to read tooltip
of a control with the help of jaws 2019.
In previous versions, one can enable tooltip from quick settings and
jaws was good to go.
But in the latest version 2019, I am unable to find it in the settings.
Please help.
-
when things don't seem to be going your way, always know that God has
a plan for you. If you place your trust in Him, He will give you great
gifts. We don't always know what God's plans are for us. We just know
that His ways are not our ways, but His ways are always best.


Re: How to read tool tip with Jaws

Bill White <billwhite92701@...>
 

Hi, Swati. To set reading of tool tip,

1. If you want the tool tips to be read, no matter which program is open, Press CONTROL plus SHIFT plus D to load the default JAWS script.
2. Press JAWS key plus the number six on the numbers row, to open Settings Center.
3. Arrow down to Speech Verbocity, and open with Right Arrow.
4. Arrow down to Configure Verbocity levels, and open with Right Arrow.
5. Tool Tip will be the last item in the check boxes to be checked.

Bill White
billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Swati Sinha
Sent: Tuesday, May 28, 2019 12:32 AM
To: main
Subject: How to read tool tip with Jaws

Hi all,
As the subject line suggests, I would like to know how to read tooltip
of a control with the help of jaws 2019.
In previous versions, one can enable tooltip from quick settings and
jaws was good to go.
But in the latest version 2019, I am unable to find it in the settings.
Please help.
-
when things don't seem to be going your way, always know that God has
a plan for you. If you place your trust in Him, He will give you great
gifts. We don't always know what God's plans are for us. We just know
that His ways are not our ways, but His ways are always best.


Re: JAWS command keystroke

Bill White <billwhite92701@...>
 

I don't know what program it might apply to. When I try it it says,

Failed to move to details. Doesn't matter what program, or even just in
Windows 10.

Bill White
billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Tuesday, May 28, 2019 6:24 AM
To: main@jfw.groups.io
Subject: Re: JAWS command keystroke

is there a particular program being used that it might apply to?
keyboard help mode, insert+numrow 1, might be of help here.




-------- Original Message --------
From: Bill White [mailto:billwhite92701@dslextreme.com]
To: JFW Mailing List <main@jfw.groups.io>
Date: Tuesday, May 28, 2019, 1:39 AM
Subject: JAWS command keystroke

Hi. Can someone tell me what the following JAWS keystroke is supposed to do?

In Desktop Keyboard Layout,

ALT plus JAWS key plus D

Thank you.

Bill White
billwhite92701@dslextreme.com


Re: JAWS Not Reading AdobeDC PDF Documents #advisory

Gerald Levy
 


On my new Windows 10 computer, which I set up last week, Adobe Acrobat Reader19 came already installed with the aforementioned Enable Protected Mode check box already unchecked by default.??


Gerald



On 5/28/2019 9:39 AM, Tony Schnurr wrote:
Another caveat to consider:
If this is a work computer; you may not have the appropriate admin rights to make various changes on your PC. Therefore, you may discover when you try to change settings in your Acrobat preferences, they may revert back to what they were. If that is the case, you would need to enable all features every time. Unless, that is, you can talk your IT department into making the changes for you in preferences. Good luck.


On May 28, 2019, at 09:05, Sieghard Weitzel <sieghard@...> wrote:

Maybe try to uninstall it and reinstall it, so far every single person I heard about and who had this problem could fix it by unchecking the checkbox I mentioned.

??

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Tuesday, May 28, 2019 5:53 AM
To: main@jfw.groups.io
Subject: Re: JAWS Not Reading AdobeDC PDF Documents #advisory #advisory #advisory #advisory

??

??Sorry, this does not solve it. I have the same issues, and it has happened after and adobe update and all of the security preferences including protective you are turned off. Any other ideas out there question??

??

??


From: main@jfw.groups.io on behalf of Sieghard Weitzel <sieghard@...>
Sent: Tuesday, May 28, 2019 8:49 AM
To: main@jfw.groups.io
Subject: Re: JAWS Not Reading AdobeDC PDF Documents #advisory #advisory #advisory #advisory

??

Guess you missed this as it came up a couple of times in the last few weeks ????

1. Go to Preferences either via the menu or by pressing Control + K

2. Type ???S??? until you get to ???Security (Enhanced) or arrow down the list until you find it

3. Tab once and you hear ???Enable Protected Mode at startup???, in your case this is most likely checked.

4. Press the spacebar to uncheck it, tab to OK (in this case Shift + Tab gets you there faster) and activate it.

5. Close Acrobat Reader DC and reopen a PDF and all will be well. It seems like a recent update to Acrobat Reader DC has checked this option even if it was previously unchecked.

??

Regards,

Sieghard

??

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mark Fisher
Sent: Tuesday, May 28, 2019 5:42 AM
To: main@jfw.groups.io
Subject: JAWS Not Reading AdobeDC PDF Documents #advisory #advisory #advisory #advisory

??

Hi,

I'm currently running JAWS 2019 latest edition and Windows 10 Version 10.0.17763 and AdobeDC??Version: 19.12.20034.328841

All PDF document that I try and open via AdobeDC either by double clicking the file from within a folder or as an e-mail attachment or from the File Open menu in AdobeDC are no longer read by JAWS. I've checked the Preferences which are laid out differently to what I can remember the last time I was in there in AdobeDC and it would appear everything is switched on correctly. when I look at the About item in Help, I can see that AdobeDC knows I'm running JAWS.

When the files open, they don't do the usual preparing for reading and no progress display is shown on the screen. The PDF files are not images and I can OCR them through convenient OCR.

What am I missing? Any hints gladly accepted before I try a full reinstall of AdobeDC.

Have a great day.

Mark


Re: JAWS command keystroke

Mario
 

in the default keyboard map (insert+numrow 8), insert+alt+d is
associated with FollowDetailsRelation but there's no synopsis or
description. maybe someone will know more.

-------- Original Message --------
From: Mario [mailto:mrb620@hotmail.com]
To: main@jfw.groups.io
Date: Tuesday, May 28, 2019, 9:24 AM
Subject: JAWS command keystroke

is there a particular program being used that it might apply to?
keyboard help mode, insert+numrow 1, might be of help here.




-------- Original Message --------
From: Bill White [mailto:billwhite92701@dslextreme.com]
To: JFW Mailing List <main@jfw.groups.io>
Date: Tuesday, May 28, 2019, 1:39 AM
Subject: JAWS command keystroke

Hi. Can someone tell me what the following JAWS keystroke is supposed to
do?

In Desktop Keyboard Layout,

ALT plus JAWS key plus D

Thank you.

Bill White
billwhite92701@dslextreme.com


Re: JAWS Not Reading AdobeDC PDF Documents #advisory

Tony Schnurr
 

Another caveat to consider:
If this is a work computer; you may not have the appropriate admin rights to make various changes on your PC. Therefore, you may discover when you try to change settings in your Acrobat preferences, they may revert back to what they were. If that is the case, you would need to enable all features every time. Unless, that is, you can talk your IT department into making the changes for you in preferences. Good luck.


On May 28, 2019, at 09:05, Sieghard Weitzel <sieghard@...> wrote:

Maybe try to uninstall it and reinstall it, so far every single person I heard about and who had this problem could fix it by unchecking the checkbox I mentioned.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Tuesday, May 28, 2019 5:53 AM
To: main@jfw.groups.io
Subject: Re: JAWS Not Reading AdobeDC PDF Documents #advisory #advisory #advisory #advisory

 

 Sorry, this does not solve it. I have the same issues, and it has happened after and adobe update and all of the security preferences including protective you are turned off. Any other ideas out there question 

 

 


From: main@jfw.groups.io on behalf of Sieghard Weitzel <sieghard@...>
Sent: Tuesday, May 28, 2019 8:49 AM
To: main@jfw.groups.io
Subject: Re: JAWS Not Reading AdobeDC PDF Documents #advisory #advisory #advisory #advisory

 

Guess you missed this as it came up a couple of times in the last few weeks 😊

1. Go to Preferences either via the menu or by pressing Control + K

2. Type “S” until you get to “Security (Enhanced) or arrow down the list until you find it

3. Tab once and you hear “Enable Protected Mode at startup”, in your case this is most likely checked.

4. Press the spacebar to uncheck it, tab to OK (in this case Shift + Tab gets you there faster) and activate it.

5. Close Acrobat Reader DC and reopen a PDF and all will be well. It seems like a recent update to Acrobat Reader DC has checked this option even if it was previously unchecked.

 

Regards,

Sieghard

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mark Fisher
Sent: Tuesday, May 28, 2019 5:42 AM
To: main@jfw.groups.io
Subject: JAWS Not Reading AdobeDC PDF Documents #advisory #advisory #advisory #advisory

 

Hi,

I'm currently running JAWS 2019 latest edition and Windows 10 Version 10.0.17763 and AdobeDC Version: 19.12.20034.328841

All PDF document that I try and open via AdobeDC either by double clicking the file from within a folder or as an e-mail attachment or from the File Open menu in AdobeDC are no longer read by JAWS. I've checked the Preferences which are laid out differently to what I can remember the last time I was in there in AdobeDC and it would appear everything is switched on correctly. when I look at the About item in Help, I can see that AdobeDC knows I'm running JAWS.

When the files open, they don't do the usual preparing for reading and no progress display is shown on the screen. The PDF files are not images and I can OCR them through convenient OCR.

What am I missing? Any hints gladly accepted before I try a full reinstall of AdobeDC.

Have a great day.

Mark


Re: JAWS Not Reading AdobeDC PDF Documents #advisory

Leo
 

wow, it really worked for me...
it's been weeks since I got this problem, so thank you, sometimes it is just difficult to follow each thread due to the flood of messages...


Leo, AKA Literophilus

"The true purpose of art was not to create beautiful objects, he discovered.
It was a method of understanding, a way of penetrating the world and finding one’s place in it.}   Paul Auster.


El 28/05/2019 a las 7:05, Sieghard Weitzel escribió:

Maybe try to uninstall it and reinstall it, so far every single person I heard about and who had this problem could fix it by unchecking the checkbox I mentioned.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Tuesday, May 28, 2019 5:53 AM
To: main@jfw.groups.io
Subject: Re: JAWS Not Reading AdobeDC PDF Documents #advisory #advisory #advisory #advisory

 

 Sorry, this does not solve it. I have the same issues, and it has happened after and adobe update and all of the security preferences including protective you are turned off. Any other ideas out there question 

 

 


From: main@jfw.groups.io on behalf of Sieghard Weitzel <sieghard@...>
Sent: Tuesday, May 28, 2019 8:49 AM
To: main@jfw.groups.io
Subject: Re: JAWS Not Reading AdobeDC PDF Documents #advisory #advisory #advisory #advisory

 

Guess you missed this as it came up a couple of times in the last few weeks 😊

1. Go to Preferences either via the menu or by pressing Control + K

2. Type “S” until you get to “Security (Enhanced) or arrow down the list until you find it

3. Tab once and you hear “Enable Protected Mode at startup”, in your case this is most likely checked.

4. Press the spacebar to uncheck it, tab to OK (in this case Shift + Tab gets you there faster) and activate it.

5. Close Acrobat Reader DC and reopen a PDF and all will be well. It seems like a recent update to Acrobat Reader DC has checked this option even if it was previously unchecked.

 

Regards,

Sieghard

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mark Fisher
Sent: Tuesday, May 28, 2019 5:42 AM
To: main@jfw.groups.io
Subject: JAWS Not Reading AdobeDC PDF Documents #advisory #advisory #advisory #advisory

 

Hi,

I'm currently running JAWS 2019 latest edition and Windows 10 Version 10.0.17763 and AdobeDC Version: 19.12.20034.328841

All PDF document that I try and open via AdobeDC either by double clicking the file from within a folder or as an e-mail attachment or from the File Open menu in AdobeDC are no longer read by JAWS. I've checked the Preferences which are laid out differently to what I can remember the last time I was in there in AdobeDC and it would appear everything is switched on correctly. when I look at the About item in Help, I can see that AdobeDC knows I'm running JAWS.

When the files open, they don't do the usual preparing for reading and no progress display is shown on the screen. The PDF files are not images and I can OCR them through convenient OCR.

What am I missing? Any hints gladly accepted before I try a full reinstall of AdobeDC.

Have a great day.

Mark



Re: JAWS command keystroke

Mario
 

is there a particular program being used that it might apply to?
keyboard help mode, insert+numrow 1, might be of help here.

-------- Original Message --------
From: Bill White [mailto:billwhite92701@dslextreme.com]
To: JFW Mailing List <main@jfw.groups.io>
Date: Tuesday, May 28, 2019, 1:39 AM
Subject: JAWS command keystroke

Hi. Can someone tell me what the following JAWS keystroke is supposed to do?

In Desktop Keyboard Layout,

ALT plus JAWS key plus D

Thank you.

Bill White
billwhite92701@dslextreme.com