Date   

Re: Jaws not talking when tabing through the network section

Maria Reyes
 

Go over to your system tray then arrow to where jaws says your network name and press enter and try to tab around the screen. Jaws 2018 will not say anything unless I turn narrator 

On Apr 14, 2019, at 4:43 PM, Sieghard Weitzel <sieghard@...> wrote:

Can you explain in more detail what you mean by “Network area”? I just went to Settings > Network and Internet” and Jaws reads many things when tabbing through these different categories although I am using Jaws 2019.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Saturday, April 13, 2019 9:44 PM
To: main@jfw.groups.io
Subject: Re: Jaws not talking when tabing through the network section

 

 

Yes, a good example of where one needs to launch Narrator since Jaws through 2019 seem to be mostly useless in there.

Richard

 

Check out my web site at: www.turner42.com

“The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying.  There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss." --Douglas Adams, from Life, The Universe and Everything, p.59

 

The most common way people give up their power is by thinking they don't have any." -- Alice Walker

 


On Apr 13, 2019, at 8:55 PM, Maria Reyes <mgreyes901@...> wrote:

Hi I am using Jaws 2018 and Windows 10. When I tab around the network area Jaws doesn't say anything. I just hear tab tab tab. Is this fixable or is this a bug?



Re: Save Icon not visible

 

I assume it is not possible for anybody to go to this website?
Have you tried to find this with the Jaws cursor or have you tried to tab or to turn off virtual cursor and then tab?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Klaus Vielhauer
Sent: Sunday, April 14, 2019 4:36 AM
To: main@jfw.groups.io
Subject: Save Icon not visible

Hello,
I run the latest version of Jaws and Windows 10
Situation: I access a webpage where I can edit music albums for my Innuos audio network player At the right bottom of the screen is a "Save" Icon to save my changes.
Problem: I cannot find this Icon with Jaws - it is probably not labelled nor classed?.
So far,
1. When my wife places the mouse on the Icon the Jaws command "cursor to Jaws" will activate the Icon.
2. I tried to set a placemarker - however since PC cursor to Jaws immediately activates the ICon and it disappears this does not work.
   Or do I miss something so far I could not in Jaws cursor mode set a placemarker?
Please help.
Klaus


Re: Jaws not talking when tabing through the network section

 

Can you explain in more detail what you mean by “Network area”? I just went to Settings > Network and Internet” and Jaws reads many things when tabbing through these different categories although I am using Jaws 2019.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Saturday, April 13, 2019 9:44 PM
To: main@jfw.groups.io
Subject: Re: Jaws not talking when tabing through the network section

 

 

Yes, a good example of where one needs to launch Narrator since Jaws through 2019 seem to be mostly useless in there.

Richard

 

Check out my web site at: www.turner42.com

“The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying.  There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss." --Douglas Adams, from Life, The Universe and Everything, p.59

 

The most common way people give up their power is by thinking they don't have any." -- Alice Walker

 


On Apr 13, 2019, at 8:55 PM, Maria Reyes <mgreyes901@...> wrote:

Hi I am using Jaws 2018 and Windows 10. When I tab around the network area Jaws doesn't say anything. I just hear tab tab tab. Is this fixable or is this a bug?



Re: Strange Outlook Issue

Tom Behler
 

Sieghard:

 

I ultimately may try the Microsoft Accessibility Hotline, but the problem seems to have lessened somewhat in the last day or two.

 

I’ll keep the list posted if it recurs, or if I do end up calling Microsoft.

 

Thankyou!

 

Tom Behler

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Sunday, April 14, 2019 3:45 PM
To: main@jfw.groups.io
Subject: Re: Strange Outlook Issue

 

Have you tried Microsoft Acccessibility? I don’t ever recall that a message I replied to was not telling me “Replied” when I arrowed down the messages in my Inbox.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: Friday, April 12, 2019 11:19 AM
To: main@jfw.groups.io
Subject: Re: Strange Outlook Issue

 

               Well, at least I know I’m not alone.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Friday, April 12, 2019 1:45 PM
To: main@jfw.groups.io
Subject: Re: Strange Outlook Issue

 

Hi,

  Yes, I have the same issues.  Recent updates to Outlook have improved but not fixed the problem.  Sometimes the reply designation works and other times no. Like you, have not found a consistent reason or fix. 

Dan  

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: Thursday, April 11, 2019 5:19 PM
To: jfw list <jfw@groups.io>
Subject: Strange Outlook Issue

 

Hello, everyone.

 

I am not sure if this a Jaws or an Outlook problem, but I am experienceing strange and inconsistent behavior in Outlook with regard to  noting e-mails that I have replied to.

 

Up until recently, if I replied to an e-mail, and decided to keep the original e-mail in my inbox, that e-mail would have a “replied” designation associated with it.  I find this to be quite handy, especially when I have e-mails that require multiple responses or action steps.

 

However, within  the past week or so, I no longer consistently receive these “replied” designations.  In other words, sometimes I receive the designations, while other times, I do not.

 

This is a problem, since I sometimes can’t recall whether I’ve initially replied to a message, and have to go back into my sent file to find out for sure.

 

Does anyone know how to consistently restore the “replied” designation on e-mails to which I’ve already responded?

 

I’m currently using the latest build of Jaws 2019 with the Office 365 version of Outlook 2016, and Windows 10.

 

Thank you!

 

Tom Behler

 


Re: Strange Outlook Issue

 

Have you tried Microsoft Acccessibility? I don’t ever recall that a message I replied to was not telling me “Replied” when I arrowed down the messages in my Inbox.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: Friday, April 12, 2019 11:19 AM
To: main@jfw.groups.io
Subject: Re: Strange Outlook Issue

 

               Well, at least I know I’m not alone.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Friday, April 12, 2019 1:45 PM
To: main@jfw.groups.io
Subject: Re: Strange Outlook Issue

 

Hi,

  Yes, I have the same issues.  Recent updates to Outlook have improved but not fixed the problem.  Sometimes the reply designation works and other times no. Like you, have not found a consistent reason or fix. 

Dan  

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: Thursday, April 11, 2019 5:19 PM
To: jfw list <jfw@groups.io>
Subject: Strange Outlook Issue

 

Hello, everyone.

 

I am not sure if this a Jaws or an Outlook problem, but I am experienceing strange and inconsistent behavior in Outlook with regard to  noting e-mails that I have replied to.

 

Up until recently, if I replied to an e-mail, and decided to keep the original e-mail in my inbox, that e-mail would have a “replied” designation associated with it.  I find this to be quite handy, especially when I have e-mails that require multiple responses or action steps.

 

However, within  the past week or so, I no longer consistently receive these “replied” designations.  In other words, sometimes I receive the designations, while other times, I do not.

 

This is a problem, since I sometimes can’t recall whether I’ve initially replied to a message, and have to go back into my sent file to find out for sure.

 

Does anyone know how to consistently restore the “replied” designation on e-mails to which I’ve already responded?

 

I’m currently using the latest build of Jaws 2019 with the Office 365 version of Outlook 2016, and Windows 10.

 

Thank you!

 

Tom Behler

 


Re: Jaws 2019 not giving background color in Excel 2016 or 2019

Mike B
 


Hi Russell,
 
You could put, no shading, into the Jaws dictionary and set it so nothing is said or assign a sound to it.
 
 
Take care.  Mike.  Sent from my iBarstool.  Go Dodgers!
I don't know the key to success, but the key to failure is trying to please everybody.

----- Original Message -----
Sent: Sunday, April 14, 2019 9:09 AM
Subject: Re: Jaws 2019 not giving background color in Excel 2016 or 2019

Hi,

 

Thanks for confirming that I’m not the only one having this issue. I found a bit of a workaround. There is a setting in Excel, under Quick Settings (Insert + V) called “Shading changes indication”, and when I turn this on, Jaws will announce any color shading changes when moving into a cell. I would still prefer the usual keystrokes to give me that info, but till Vispero sees fit to fix this issue, I’ll continue with the Shading changes indication. The only thing I don’t like about this setting is that every time I go to a cell with no shading, I must hear Jaws say “no shading”. Not a big deal, just a little annoying! 😊

 

Thanks again.

 

Russell

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via Groups.Io
Sent: Wednesday, April 10, 2019 9:50 AM
To: main@jfw.groups.io
Subject: Re: Jaws 2019 not giving background color in Excel 2016 or 2019

 

I do not have a sheet with conditional formatting, but I did just fill a cell with red.  You are not the first person I’ve heard say there was an issue with JAWS reporting the background color in Excel.  I’m still on JAWS 2019 1810 here at work and it seems to be working correctly on this version.  Not sure which update broke this function.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Russell Solowoniuk
Sent: Sunday, April 7, 2019 10:40 AM
To: jfw@groups.io
Subject: Jaws 2019 not giving background color in Excel 2016 or 2019

 

Hi everyone,

 

I am trying to use Conditional formatting in both Excel 2016 and 2019. I choose to use a formula to decide which cells are formatted, choose cells in sheet 1 that do not equal cells in sheet 2, and choose to fill the cells matching the criteria with a red background fill. The conditional formatting is working, but using Jaws 2019, I have no way of knowing whether or not it is working, because Jaws reads “text color black, background color white” when I press Insert + F, and “Black on white” when I press Insert + 5 on cells that have different values. If I load NVDA and press Insert+ F on these cells, NVDA says “black on bright red background”.

 

Has anyone else noticed this? I am getting so frustrated with Jaws not being able to do basic things like this when a free screen reader like NVDA is able to do it with no problem!

 

Thanks for any feedback.

 

Russell



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


Accessible price tracking extensions?

Cristóbal
 

Hello list,

I’m in search of an accessible price tracking service/extension. I’ve tried CamelCamelCamel Keepa, Price Plus and Honey for example. For the usual sites, Amazon, NewEgg, BestBuy and so on,  but all in all, they don’t really provide this info in an accessible format. They’re all pretty much graph/chart driven. There is sometimes some info that can be accessed. CamelCamelCamel can provide the highest/lowest price, but as far as more detailed info? Not really.

Is anyone aware of a service/extension that can provide this sort of information in an accessible manner? I’m guessing most likely in a table format? To be clear, I’m not looking for a price tracker that can alert one when there’s a price drop. That I can get to work fine. It’s the historical price tracking stuff I’m interested in.

My main screen reader is Jaws, but I can also use NVDA if that makes any sort of a difference.

Thanks,

 


Re: Jaws 2019 not giving background color in Excel 2016 or 2019

Russell Solowoniuk
 

Hi,

 

Thanks for confirming that I’m not the only one having this issue. I found a bit of a workaround. There is a setting in Excel, under Quick Settings (Insert + V) called “Shading changes indication”, and when I turn this on, Jaws will announce any color shading changes when moving into a cell. I would still prefer the usual keystrokes to give me that info, but till Vispero sees fit to fix this issue, I’ll continue with the Shading changes indication. The only thing I don’t like about this setting is that every time I go to a cell with no shading, I must hear Jaws say “no shading”. Not a big deal, just a little annoying! 😊

 

Thanks again.

 

Russell

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via Groups.Io
Sent: Wednesday, April 10, 2019 9:50 AM
To: main@jfw.groups.io
Subject: Re: Jaws 2019 not giving background color in Excel 2016 or 2019

 

I do not have a sheet with conditional formatting, but I did just fill a cell with red.  You are not the first person I’ve heard say there was an issue with JAWS reporting the background color in Excel.  I’m still on JAWS 2019 1810 here at work and it seems to be working correctly on this version.  Not sure which update broke this function.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Russell Solowoniuk
Sent: Sunday, April 7, 2019 10:40 AM
To: jfw@groups.io
Subject: Jaws 2019 not giving background color in Excel 2016 or 2019

 

Hi everyone,

 

I am trying to use Conditional formatting in both Excel 2016 and 2019. I choose to use a formula to decide which cells are formatted, choose cells in sheet 1 that do not equal cells in sheet 2, and choose to fill the cells matching the criteria with a red background fill. The conditional formatting is working, but using Jaws 2019, I have no way of knowing whether or not it is working, because Jaws reads “text color black, background color white” when I press Insert + F, and “Black on white” when I press Insert + 5 on cells that have different values. If I load NVDA and press Insert+ F on these cells, NVDA says “black on bright red background”.

 

Has anyone else noticed this? I am getting so frustrated with Jaws not being able to do basic things like this when a free screen reader like NVDA is able to do it with no problem!

 

Thanks for any feedback.

 

Russell



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


Save Icon not visible

Klaus Vielhauer
 

Hello,
I run the latest version of Jaws and Windows 10
Situation: I access a webpage where I can edit music albums for my Innuos audio network player
At the right bottom of the screen is a "Save" Icon to save my changes.
Problem: I cannot find this Icon with Jaws - it is probably not labelled nor classed?.
So far,
1. When my wife places the mouse on the Icon the Jaws command "cursor to Jaws" will activate the Icon.
2. I tried to set a placemarker - however since PC cursor to Jaws immediately activates the ICon and it disappears this does not work.
   Or do I miss something so far I could not in Jaws cursor mode set a placemarker?
Please help.
Klaus


Re: Jaws not talking when tabing through the network section

Richard Turner
 


Yes, a good example of where one needs to launch Narrator since Jaws through 2019 seem to be mostly useless in there.
Richard


Check out my web site at: www.turner42.com

“The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying.  There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss." --Douglas Adams, from Life, The Universe and Everything, p.59


The most common way people give up their power is by thinking they don't have any." -- Alice Walker



On Apr 13, 2019, at 8:55 PM, Maria Reyes <mgreyes901@...> wrote:

Hi I am using Jaws 2018 and Windows 10. When I tab around the network area Jaws doesn't say anything. I just hear tab tab tab. Is this fixable or is this a bug?




Jaws not talking when tabing through the network section

Maria Reyes
 

Hi I am using Jaws 2018 and Windows 10. When I tab around the network area Jaws doesn't say anything. I just hear tab tab tab. Is this fixable or is this a bug?


Re: Scheduling in Outlook calendar

Kevin Meyers <kevinmeyers@...>
 

Thanks very much that worked.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ashleigh Piccinino
Sent: Saturday, April 13, 2019 7:37 AM
To: main@jfw.groups.io
Subject: Re: Scheduling in Outlook calendar

 

After you get into your calendar, try pressing control plus in. You should be able to then schedule your event.


On Apr 13, 2019, at 7:35 AM, Kevin Meyers <kevinmeyers@...> wrote:

Hello,

 

I’m using Jaws 2018 and Windows10. A few weeks ago I was able to schedule a appointment on my Outlook calendar. I would press control 2 to get to the calendar. I would then press alt and down arrow once time. The first thing would be new. I would press enter and I could enter the necessary information to schedule somethihg. Now the ability to schedule doesn’t show up anywer on the menu. Was something changed? Any thoughts of what key strokes I need to use?

 

Thanks,

 

Kevin

 


Re: Scheduling in Outlook calendar

george b <gbmagoo@...>
 

Control 2 for calander

Alt h for home in the ribbon

Arrow down once and then right to choose what you wish and hit enter

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ashleigh Piccinino
Sent: April 13, 2019 5:37
To: main@jfw.groups.io
Subject: Re: Scheduling in Outlook calendar

 

After you get into your calendar, try pressing control plus in. You should be able to then schedule your event.


On Apr 13, 2019, at 7:35 AM, Kevin Meyers <kevinmeyers@...> wrote:

Hello,

 

I’m using Jaws 2018 and Windows10. A few weeks ago I was able to schedule a appointment on my Outlook calendar. I would press control 2 to get to the calendar. I would then press alt and down arrow once time. The first thing would be new. I would press enter and I could enter the necessary information to schedule somethihg. Now the ability to schedule doesn’t show up anywer on the menu. Was something changed? Any thoughts of what key strokes I need to use?

 

Thanks,

 

Kevin

 


Re: Scheduling in Outlook calendar

Ashleigh Piccinino
 

After you get into your calendar, try pressing control plus in. You should be able to then schedule your event.


On Apr 13, 2019, at 7:35 AM, Kevin Meyers <kevinmeyers@...> wrote:

Hello,

 

I’m using Jaws 2018 and Windows10. A few weeks ago I was able to schedule a appointment on my Outlook calendar. I would press control 2 to get to the calendar. I would then press alt and down arrow once time. The first thing would be new. I would press enter and I could enter the necessary information to schedule somethihg. Now the ability to schedule doesn’t show up anywer on the menu. Was something changed? Any thoughts of what key strokes I need to use?

 

Thanks,

 

Kevin

 


Scheduling in Outlook calendar

Kevin Meyers <kevinmeyers@...>
 

Hello,

 

I’m using Jaws 2018 and Windows10. A few weeks ago I was able to schedule a appointment on my Outlook calendar. I would press control 2 to get to the calendar. I would then press alt and down arrow once time. The first thing would be new. I would press enter and I could enter the necessary information to schedule somethihg. Now the ability to schedule doesn’t show up anywer on the menu. Was something changed? Any thoughts of what key strokes I need to use?

 

Thanks,

 

Kevin

 


Re: How do I perform a JAWS picture scan?

Dave...
 

Tim,

Nope. If you press JAWS+Spacebar, then P and then the Question mark, you
bring up the help menu, which very clearly states you can press the letter A
to scan from your scanner or Pearl camera. Something is broken.

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "Tim Ford" <ttford@gmail.com>
To: <main@jfw.groups.io>
Sent: Friday, April 12, 2019 20:33
Subject: Re: How do I perform a JAWS picture scan?


I believe you want to first scan and save the image to a file, then do the f
command for the picture analysis to go to that file.

Tim


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of netbat66
Sent: Friday, April 12, 2019 8:22 PM
To: main@jfw.groups.io
Subject: Re: How do I perform a JAWS picture scan?

but can you scan a picture into picture smart from the flat bed scanner?
it wakes up the scanner when its a sleep but that is all it does.
so far it will not work when i use jaws/spacebar/p and then a to aquire the
image. the scanner head doesn't do anything and it says it can't detect any
text.
this is with win 7 and 10
with del b1165 mono laser all in one on the u s b ports.
the scanner works with openbook 8 and the windows paint programs.

-----Original Message-----
From: Bill Tillery
Sent: Friday, April 12, 2019 6:53 PM
To: main@jfw.groups.io
Subject: Re: How do I perform a JAWS picture scan?



Choose the picture desire to scan.



Press the jaws key plus spacebar plus p plus f.



It will take a few seconds but the scan should complete. Hth







From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tim Ford
Sent: Friday, April 12, 2019 8:47 PM
To: jfw@groups.io
Subject: How do I perform a JAWS picture scan?





I have heard of the new feature, but cannot find "picture" in the JAWS
command
search. Any advice is much appreciated.



Tim Ford


Re: How do I perform a JAWS picture scan?

Dave...
 

I just gave it a try with my Pearl camera. Photo under the camera, Press
Jaws+Spacebar then P. Announcement: Picture Smart. So far, so good. Then
press letter A. Announcement "OCR component not installed".

Drat, and double drat.

However, if I use Insert+J to open the JAWS application and scroll down to
the utilities menu and select Picture Smart, and select Scanners and Camera,
which cclaims is available using JAWS+Spacebar, then P then A)
I'm presented with several adjustment options such as Select input device,
light on/off, advanced options, and acquire image.

Very, very different from the JAWS+Spacebar then P approach.

Something is rotten in the state of Denmark, methinks.

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "netbat66" <netbat66@gmail.com>
To: <main@jfw.groups.io>
Sent: Friday, April 12, 2019 20:43
Subject: Re: How do I perform a JAWS picture scan?


then why does picture smart have the option to acquire a image from the
flatbed
scanner or Pearl camera? this option is with jaws space bar and p then a

-----Original Message-----
From: Tim Ford
Sent: Friday, April 12, 2019 8:33 PM
To: main@jfw.groups.io
Subject: Re: How do I perform a JAWS picture scan?

I believe you want to first scan and save the image to a file, then do the f
command for the picture analysis to go to that file.

Tim


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of netbat66
Sent: Friday, April 12, 2019 8:22 PM
To: main@jfw.groups.io
Subject: Re: How do I perform a JAWS picture scan?

but can you scan a picture into picture smart from the flat bed scanner?
it wakes up the scanner when its a sleep but that is all it does.
so far it will not work when i use jaws/spacebar/p and then a to aquire the
image. the scanner head doesn't do anything and it says it can't detect any
text.
this is with win 7 and 10
with del b1165 mono laser all in one on the u s b ports.
the scanner works with openbook 8 and the windows paint programs.

-----Original Message-----
From: Bill Tillery
Sent: Friday, April 12, 2019 6:53 PM
To: main@jfw.groups.io
Subject: Re: How do I perform a JAWS picture scan?



Choose the picture desire to scan.



Press the jaws key plus spacebar plus p plus f.



It will take a few seconds but the scan should complete. Hth







From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tim Ford
Sent: Friday, April 12, 2019 8:47 PM
To: jfw@groups.io
Subject: How do I perform a JAWS picture scan?





I have heard of the new feature, but cannot find "picture" in the JAWS
command
search. Any advice is much appreciated.



Tim Ford


Re: How do I perform a JAWS picture scan?

netbat66
 

then why does picture smart have the option to acquire a image from the flatbed scanner or perle camera? this option is with jaws space bar and p then a

-----Original Message-----
From: Tim Ford
Sent: Friday, April 12, 2019 8:33 PM
To: main@jfw.groups.io
Subject: Re: How do I perform a JAWS picture scan?

I believe you want to first scan and save the image to a file, then do the f command for the picture analysis to go to that file.

Tim


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of netbat66
Sent: Friday, April 12, 2019 8:22 PM
To: main@jfw.groups.io
Subject: Re: How do I perform a JAWS picture scan?

but can you scan a picture into picture smart from the flat bed scanner?
it wakes up the scanner when its a sleep but that is all it does.
so far it will not work when i use jaws/spacebar/p and then a to aquire the
image. the scanner head doesn't do anything and it says it can't detect any
text.
this is with win 7 and 10
with del b1165 mono laser all in one on the u s b ports.
the scanner works with openbook 8 and the windows paint programs.

-----Original Message-----
From: Bill Tillery
Sent: Friday, April 12, 2019 6:53 PM
To: main@jfw.groups.io
Subject: Re: How do I perform a JAWS picture scan?



Choose the picture desire to scan.



Press the jaws key plus spacebar plus p plus f.



It will take a few seconds but the scan should complete. Hth







From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tim Ford
Sent: Friday, April 12, 2019 8:47 PM
To: jfw@groups.io
Subject: How do I perform a JAWS picture scan?





I have heard of the new feature, but cannot find “picture” in the JAWS command
search. Any advice is much appreciated.



Tim Ford


Re: How do I perform a JAWS picture scan?

Tim Ford
 

I believe you want to first scan and save the image to a file, then do the f command for the picture analysis to go to that file.

Tim

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of netbat66
Sent: Friday, April 12, 2019 8:22 PM
To: main@jfw.groups.io
Subject: Re: How do I perform a JAWS picture scan?

but can you scan a picture into picture smart from the flat bed scanner?
it wakes up the scanner when its a sleep but that is all it does.
so far it will not work when i use jaws/spacebar/p and then a to aquire the
image. the scanner head doesn't do anything and it says it can't detect any
text.
this is with win 7 and 10
with del b1165 mono laser all in one on the u s b ports.
the scanner works with openbook 8 and the windows paint programs.

-----Original Message-----
From: Bill Tillery
Sent: Friday, April 12, 2019 6:53 PM
To: main@jfw.groups.io
Subject: Re: How do I perform a JAWS picture scan?



Choose the picture desire to scan.



Press the jaws key plus spacebar plus p plus f.



It will take a few seconds but the scan should complete. Hth







From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tim Ford
Sent: Friday, April 12, 2019 8:47 PM
To: jfw@groups.io
Subject: How do I perform a JAWS picture scan?





I have heard of the new feature, but cannot find “picture” in the JAWS command
search. Any advice is much appreciated.



Tim Ford


Re: How do I perform a JAWS picture scan?

netbat66
 

but can you scan a picture into picture smart from the flat bed scanner?
it wakes up the scanner when its a sleep but that is all it does.
so far it will not work when i use jaws/spacebar/p and then a to aquire the image. the scanner head doesn't do anything and it says it can't detect any text.
this is with win 7 and 10
with del b1165 mono laser all in one on the u s b ports.
the scanner works with openbook 8 and the windows paint programs.

-----Original Message-----
From: Bill Tillery
Sent: Friday, April 12, 2019 6:53 PM
To: main@jfw.groups.io
Subject: Re: How do I perform a JAWS picture scan?



Choose the picture desire to scan.



Press the jaws key plus spacebar plus p plus f.



It will take a few seconds but the scan should complete. Hth







From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tim Ford
Sent: Friday, April 12, 2019 8:47 PM
To: jfw@groups.io
Subject: How do I perform a JAWS picture scan?





I have heard of the new feature, but cannot find “picture” in the JAWS command search. Any advice is much appreciated.



Tim Ford

18421 - 18440 of 87012