1. main@jfw.groups.io
   Date   
amazon research it broken in jaws 2019?

dennis
 

anyone else having the problem of amazon research it not working. it also doesn't work in any other version of jaws that i have wich would be 16, 2018 and 2019. haven't heard any conversation about this at all. is it just me?

--
Dennis Cornelison

Virus-free. www.avast.com

Re: JAWS 2019 and Amateur Radio Logging Program

DAN REID
 

It happens with n3fjp logs.  spotted it first with aclog and then with cqwpx.
dan

----- Original Message -----
Sent: Saturday, March 30, 2019 8:57 PM
Subject: Re: JAWS 2019 and Amateur Radio Logging Program

Dan:

 

What specific logging program are you trying to use?

 

Tom Behler: KB8TYJ

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of DAN REID
Sent: Saturday, March 30, 2019 8:07 AM
To: main@jfw.groups.io
Subject: JAWS 2019 and Amateur Radio Logging Program

 

Greetings,
I am having an issue with a logging program for amateur radio.  When i attempt to edit a contact from a previous entry, I am bounced out and dropped to the front page of the logging program.  I have had a sighted person view this activity via remote and states that it appears that Jaws is preventing me from the editing process.  I am also prevented from entering a directory within the logging program.  Have spoken with the logging author and suspects either Jaws or anti-virus as the cause.  If it were an anti-virus issue, I would think that importing and exporting data would be prevented as well, but that piece works just fine.  I am running Jaws 19 and Windows 10.  Any suggestions are greatly appreciated.
Thank you,
Dan Reid

Re: JAWS 2019 and Amateur Radio Logging Program

Tom Behler
 

Dan:

 

What specific logging program are you trying to use?

 

Tom Behler: KB8TYJ

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of DAN REID
Sent: Saturday, March 30, 2019 8:07 AM
To: main@jfw.groups.io
Subject: JAWS 2019 and Amateur Radio Logging Program

 

Greetings,
I am having an issue with a logging program for amateur radio.  When i attempt to edit a contact from a previous entry, I am bounced out and dropped to the front page of the logging program.  I have had a sighted person view this activity via remote and states that it appears that Jaws is preventing me from the editing process.  I am also prevented from entering a directory within the logging program.  Have spoken with the logging author and suspects either Jaws or anti-virus as the cause.  If it were an anti-virus issue, I would think that importing and exporting data would be prevented as well, but that piece works just fine.  I am running Jaws 19 and Windows 10.  Any suggestions are greatly appreciated.
Thank you,
Dan Reid

JAWS 2019 and Amateur Radio Logging Program

DAN REID
 

Greetings,
I am having an issue with a logging program for amateur radio.  When i attempt to edit a contact from a previous entry, I am bounced out and dropped to the front page of the logging program.  I have had a sighted person view this activity via remote and states that it appears that Jaws is preventing me from the editing process.  I am also prevented from entering a directory within the logging program.  Have spoken with the logging author and suspects either Jaws or anti-virus as the cause.  If it were an anti-virus issue, I would think that importing and exporting data would be prevented as well, but that piece works just fine.  I am running Jaws 19 and Windows 10.  Any suggestions are greatly appreciated.
Thank you,
Dan Reid
Re: JAWS and Teamviewer?

Brian Vogel
 

On Sat, Mar 30, 2019 at 02:18 AM, James Homuth wrote:
unless I feel like installing Windows 10 pro, remote desktop isn’t going to be a thing
Given the ubiquity and dirt cheap prices of Win10 Pro licenses on the now very active "recycled" market (see eBay, for one) if this will fill the bill I'd be far more inclined to buy a license and upgrade to Pro.
 
--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

   Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, and wrong.

         ~ H.L. Mencken, AKA The Sage of Baltimore
Re: JAWS and Teamviewer?

Steve Matzura
 

The best approach is NVDA Remote. You just have to leave it on and connected all the time while you're away.


On 3/30/2019 2:18 AM, James Homuth wrote:

Has anyone used these two together? Preferably, with the remote access options enabled? I’ll be looking for a new desktop shortly and would like to be able to access it remotely if I’m not home. For example: ducking around certain corporate firewalls. *cough* Is this doable? And, how much of a pain is it? I do have the remote access option already, but unless I feel like installing Windows 10 pro, remote desktop isn’t going to be a thing. Will this work?
JAWS and Teamviewer?

James Homuth
 

Has anyone used these two together? Preferably, with the remote access options enabled? I’ll be looking for a new desktop shortly and would like to be able to access it remotely if I’m not home. For example: ducking around certain corporate firewalls. *cough* Is this doable? And, how much of a pain is it? I do have the remote access option already, but unless I feel like installing Windows 10 pro, remote desktop isn’t going to be a thing. Will this work?
Re: reading acrobat

Chris Hill
 

Hello.  I had an issue with jaws and adobe a while back.  The documents all looked blank to jaws.  I finally had to call fs and they said to look in edit/preferences in adobe, look in the "security enhanced" section, and uncheck the box that said enable protected mode at startup.  Hopefully that will fix your problem.



On 3/28/2019 16:53, Stan Holdeman wrote:

Friends: Windows 10, jaws 2019 latest update, adobe acrobat DC 19.0.

 

This behavior seems to have started after March update of Jaws 2019.

 

I can read my credit statement statements downloaded in pdf format only in this way: with Magic also running, I can drop the mouse cursor down over the top of the statement and Jaws starts reading as if say all mode. I can’t stop and restart reading except by starting over as described.

 

I cannot seem to get Jaws to focus and read anything in any other way. Yes, Magic seems to also have to be running.

 

This all seems very strange to me.

 

Stan

 
reading acrobat

Stan Holdeman
 

Friends: Windows 10, jaws 2019 latest update, adobe acrobat DC 19.0.

 

This behavior seems to have started after March update of Jaws 2019.

 

I can read my credit statement statements downloaded in pdf format only in this way: with Magic also running, I can drop the mouse cursor down over the top of the statement and Jaws starts reading as if say all mode. I can’t stop and restart reading except by starting over as described.

 

I cannot seem to get Jaws to focus and read anything in any other way. Yes, Magic seems to also have to be running.

 

This all seems very strange to me.

 

Stan

 
Re: adding a sound in jaws dictionary

Lee Anne Atkinson
 

I wish I could take credit for it but a much wiser, more experienced transcriptionist turned me on to this.  I particularly like the "lamp on" noise as a very subtle sound for proofing. 

 

L

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Van Lant, Robin via Groups.Io
Sent: Thursday, March 28, 2019 2:44 PM
To: main@jfw.groups.io
Subject: Re: adding a sound in jaws dictionary

 

Lee Anne,

I love this idea.  There are so many cases where words sound the same and I can see how adding the sounds would be useful. 

 

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Lee Anne Atkinson
Sent: Thursday, March 28, 2019 11:50 AM
To: main@jfw.groups.io
Subject: Re: adding a sound in jaws dictionary

 

Well, as an example I perform transcription.  Sometimes my fingers do not release the letter E quickly enough in the word w e.  If it is the first word of a sentence.  We and WE both sound the same so I have added a sound to W E  so I can hear the difference when proofing. 

 

Lee Anne 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Van Lant, Robin via Groups.Io
Sent: Thursday, March 28, 2019 1:44 PM
To: main@jfw.groups.io
Subject: Re: adding a sound in jaws dictionary

 

I have seen this setting in the Dictionary, but am curious as to ideas for when people are using this.  So far, the only dictionary entries I have made are when Vocalizer mis-pronounces a word. 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
Sent: Thursday, March 28, 2019 10:25 AM
To: main@jfw.groups.io
Subject: Re: adding a sound in jaws dictionary

 

Hi Mario & Michael,

 

Check out Richard's post.  It has the correct file path to where all the sounds are stored.


Take care.  Mike.  Sennt from my iBarstool.
Book: a utensil used to pass time while waiting for the computer repairman!

----- Original Message -----

From: Mario

Sent: Thursday, March 28, 2019 8:07 AM

Subject: Re: adding a sound in jaws dictionary

 

when choosing a sound as you refered to, there are 108 wav files to
choose from.
  the shared path that I have is "C:\ProgramData\Freedom
Scientific\JAWS\2018\SETTINGS\enu\SOUNDS\" but that folder gives me only
18 wav files.
and when I navigate to "C:\Users\Mario\AppData\Roaming\Freedom
Scientific\JAWS\2018\Settings\enu\Sounds" there are 0 files.
so at this point, I am somewhat confused where the rest of the sounds
are coming from.

-------- Original Message --------
From: mike mcglashon [mailto:michael.mcglashon@...]
Sent: Thursday, March 28, 2019, 9:40 AM
To: main@jfw.groups.io
Subject: adding a sound in jaws dictionary

OK
I am using josh’s 2019 in the latest update.
Therefore, when I go into the dictionary and select the sound it doesn’t
show me the folder path.
So knowing that I’m using jars 2019 the latest build,
How do I determine what that path is, whether it’s shared or users?


contact information
Mike McGlashon
PH: 618-783-9331
Email: michael.mcglashon@...


On Mar 28, 2019, at 9:37 AM, Mario <mrb620@...> wrote:

my educated guess is that the sounds come from either the user sounds
folder or the shared sounds folder. the path to these folders may differ
in respect to what version of JAWS you're using.

and I think you can just add the sounds you want to use as long as they
are in the .wav format. and modifying existing ones shouldn't present a
problem.

-------- Original Message --------
From: mike mcglashon [mailto:michael.mcglashon@...]
Sent: Thursday, March 28, 2019, 7:03 AM
To: main@jfw.groups.io
Subject: adding a sound in jaws dictionary

Hey guys:

How does one find the folder that stores the available sounds to choose
when adding a sound to a jaws dictionary entry?

I’d like to either add more sounds to the list of sounds available, or,

Alternatively, Go into that folder and modify a “wav” file to make a
better quality sound for the dictionary entery?

Please advise as you like.

Mike M.

Mike mcglashon

Email: Michael.mcglashon@... <mailto:Michael.mcglashon@...>

Ph: 618 783 9331










.



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.
Re: adding a sound in jaws dictionary

Van Lant, Robin
 

Lee Anne,

I love this idea.  There are so many cases where words sound the same and I can see how adding the sounds would be useful. 

 

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Lee Anne Atkinson
Sent: Thursday, March 28, 2019 11:50 AM
To: main@jfw.groups.io
Subject: Re: adding a sound in jaws dictionary

 

Well, as an example I perform transcription.  Sometimes my fingers do not release the letter E quickly enough in the word w e.  If it is the first word of a sentence.  We and WE both sound the same so I have added a sound to W E  so I can hear the difference when proofing. 

 

Lee Anne 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Van Lant, Robin via Groups.Io
Sent: Thursday, March 28, 2019 1:44 PM
To: main@jfw.groups.io
Subject: Re: adding a sound in jaws dictionary

 

I have seen this setting in the Dictionary, but am curious as to ideas for when people are using this.  So far, the only dictionary entries I have made are when Vocalizer mis-pronounces a word. 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
Sent: Thursday, March 28, 2019 10:25 AM
To: main@jfw.groups.io
Subject: Re: adding a sound in jaws dictionary

 

Hi Mario & Michael,

 

Check out Richard's post.  It has the correct file path to where all the sounds are stored.


Take care.  Mike.  Sennt from my iBarstool.
Book: a utensil used to pass time while waiting for the computer repairman!

----- Original Message -----

From: Mario

Sent: Thursday, March 28, 2019 8:07 AM

Subject: Re: adding a sound in jaws dictionary

 

when choosing a sound as you refered to, there are 108 wav files to
choose from.
  the shared path that I have is "C:\ProgramData\Freedom
Scientific\JAWS\2018\SETTINGS\enu\SOUNDS\" but that folder gives me only
18 wav files.
and when I navigate to "C:\Users\Mario\AppData\Roaming\Freedom
Scientific\JAWS\2018\Settings\enu\Sounds" there are 0 files.
so at this point, I am somewhat confused where the rest of the sounds
are coming from.

-------- Original Message --------
From: mike mcglashon [mailto:michael.mcglashon@...]
Sent: Thursday, March 28, 2019, 9:40 AM
To: main@jfw.groups.io
Subject: adding a sound in jaws dictionary

OK
I am using josh’s 2019 in the latest update.
Therefore, when I go into the dictionary and select the sound it doesn’t
show me the folder path.
So knowing that I’m using jars 2019 the latest build,
How do I determine what that path is, whether it’s shared or users?


contact information
Mike McGlashon
PH: 618-783-9331
Email: michael.mcglashon@...


On Mar 28, 2019, at 9:37 AM, Mario <mrb620@...> wrote:

my educated guess is that the sounds come from either the user sounds
folder or the shared sounds folder. the path to these folders may differ
in respect to what version of JAWS you're using.

and I think you can just add the sounds you want to use as long as they
are in the .wav format. and modifying existing ones shouldn't present a
problem.

-------- Original Message --------
From: mike mcglashon [mailto:michael.mcglashon@...]
Sent: Thursday, March 28, 2019, 7:03 AM
To: main@jfw.groups.io
Subject: adding a sound in jaws dictionary

Hey guys:

How does one find the folder that stores the available sounds to choose
when adding a sound to a jaws dictionary entry?

I’d like to either add more sounds to the list of sounds available, or,

Alternatively, Go into that folder and modify a “wav” file to make a
better quality sound for the dictionary entery?

Please advise as you like.

Mike M.

Mike mcglashon

Email: Michael.mcglashon@... <mailto:Michael.mcglashon@...>

Ph: 618 783 9331










.




This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.
Re: on address bar in Google chrome

Marty Hutchings
 

Kevin,  Try Escape.
 
Love in Christ
Marty
For our struggle is not against flesh and blood, but against the rulers, against the powers, against the world forces of this darkness, against the spiritual forces of wickedness in the heavenly places.
Therefore, take up the full armor of God, so that you will be able to resist in the evil day, and having done everything, to stand firm.
Ephesians 6:12, 13
 

Sent: Thursday, March 28, 2019 12:02 PM
Subject: on address bar in Google chrome
 

Hello, When on Google Chrome I press alt D to move to the address bar to get the site address. I’m unable to get off the address bar. I tried tab and arrow keys. Nothing happens. Is there a key stroke I need to use to get off the address bar and back onto the web page? Thanks, Kevin
Re: adding a sound in jaws dictionary

Lee Anne Atkinson
 

Well, as an example I perform transcription.  Sometimes my fingers do not release the letter E quickly enough in the word w e.  If it is the first word of a sentence.  We and WE both sound the same so I have added a sound to W E  so I can hear the difference when proofing. 

 

Lee Anne 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Van Lant, Robin via Groups.Io
Sent: Thursday, March 28, 2019 1:44 PM
To: main@jfw.groups.io
Subject: Re: adding a sound in jaws dictionary

 

I have seen this setting in the Dictionary, but am curious as to ideas for when people are using this.  So far, the only dictionary entries I have made are when Vocalizer mis-pronounces a word. 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
Sent: Thursday, March 28, 2019 10:25 AM
To: main@jfw.groups.io
Subject: Re: adding a sound in jaws dictionary

 

Hi Mario & Michael,

 

Check out Richard's post.  It has the correct file path to where all the sounds are stored.


Take care.  Mike.  Sennt from my iBarstool.
Book: a utensil used to pass time while waiting for the computer repairman!

----- Original Message -----

From: Mario

Sent: Thursday, March 28, 2019 8:07 AM

Subject: Re: adding a sound in jaws dictionary

 

when choosing a sound as you refered to, there are 108 wav files to
choose from.
  the shared path that I have is "C:\ProgramData\Freedom
Scientific\JAWS\2018\SETTINGS\enu\SOUNDS\" but that folder gives me only
18 wav files.
and when I navigate to "C:\Users\Mario\AppData\Roaming\Freedom
Scientific\JAWS\2018\Settings\enu\Sounds" there are 0 files.
so at this point, I am somewhat confused where the rest of the sounds
are coming from.

-------- Original Message --------
From: mike mcglashon [mailto:michael.mcglashon@...]
Sent: Thursday, March 28, 2019, 9:40 AM
To: main@jfw.groups.io
Subject: adding a sound in jaws dictionary

OK
I am using josh’s 2019 in the latest update.
Therefore, when I go into the dictionary and select the sound it doesn’t
show me the folder path.
So knowing that I’m using jars 2019 the latest build,
How do I determine what that path is, whether it’s shared or users?


contact information
Mike McGlashon
PH: 618-783-9331
Email: michael.mcglashon@...


On Mar 28, 2019, at 9:37 AM, Mario <mrb620@...> wrote:

my educated guess is that the sounds come from either the user sounds
folder or the shared sounds folder. the path to these folders may differ
in respect to what version of JAWS you're using.

and I think you can just add the sounds you want to use as long as they
are in the .wav format. and modifying existing ones shouldn't present a
problem.

-------- Original Message --------
From: mike mcglashon [mailto:michael.mcglashon@...]
Sent: Thursday, March 28, 2019, 7:03 AM
To: main@jfw.groups.io
Subject: adding a sound in jaws dictionary

Hey guys:

How does one find the folder that stores the available sounds to choose
when adding a sound to a jaws dictionary entry?

I’d like to either add more sounds to the list of sounds available, or,

Alternatively, Go into that folder and modify a “wav” file to make a
better quality sound for the dictionary entery?

Please advise as you like.

Mike M.

Mike mcglashon

Email: Michael.mcglashon@... <mailto:Michael.mcglashon@...>

Ph: 618 783 9331










.





This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.
Re: adding a sound in jaws dictionary

Van Lant, Robin
 

I have seen this setting in the Dictionary, but am curious as to ideas for when people are using this.  So far, the only dictionary entries I have made are when Vocalizer mis-pronounces a word. 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
Sent: Thursday, March 28, 2019 10:25 AM
To: main@jfw.groups.io
Subject: Re: adding a sound in jaws dictionary

 

Hi Mario & Michael,

 

Check out Richard's post.  It has the correct file path to where all the sounds are stored.


Take care.  Mike.  Sennt from my iBarstool.
Book: a utensil used to pass time while waiting for the computer repairman!

----- Original Message -----

From: Mario

Sent: Thursday, March 28, 2019 8:07 AM

Subject: Re: adding a sound in jaws dictionary

 

when choosing a sound as you refered to, there are 108 wav files to
choose from.
  the shared path that I have is "C:\ProgramData\Freedom
Scientific\JAWS\2018\SETTINGS\enu\SOUNDS\" but that folder gives me only
18 wav files.
and when I navigate to "C:\Users\Mario\AppData\Roaming\Freedom
Scientific\JAWS\2018\Settings\enu\Sounds" there are 0 files.
so at this point, I am somewhat confused where the rest of the sounds
are coming from.

-------- Original Message --------
From: mike mcglashon [mailto:michael.mcglashon@...]
Sent: Thursday, March 28, 2019, 9:40 AM
To: main@jfw.groups.io
Subject: adding a sound in jaws dictionary

OK
I am using josh’s 2019 in the latest update.
Therefore, when I go into the dictionary and select the sound it doesn’t
show me the folder path.
So knowing that I’m using jars 2019 the latest build,
How do I determine what that path is, whether it’s shared or users?


contact information
Mike McGlashon
PH: 618-783-9331
Email: michael.mcglashon@...


On Mar 28, 2019, at 9:37 AM, Mario <mrb620@...> wrote:

my educated guess is that the sounds come from either the user sounds
folder or the shared sounds folder. the path to these folders may differ
in respect to what version of JAWS you're using.

and I think you can just add the sounds you want to use as long as they
are in the .wav format. and modifying existing ones shouldn't present a
problem.

-------- Original Message --------
From: mike mcglashon [mailto:michael.mcglashon@...]
Sent: Thursday, March 28, 2019, 7:03 AM
To: main@jfw.groups.io
Subject: adding a sound in jaws dictionary

Hey guys:

How does one find the folder that stores the available sounds to choose
when adding a sound to a jaws dictionary entry?

I’d like to either add more sounds to the list of sounds available, or,

Alternatively, Go into that folder and modify a “wav” file to make a
better quality sound for the dictionary entery?

Please advise as you like.

Mike M.

Mike mcglashon

Email: Michael.mcglashon@... <mailto:Michael.mcglashon@...>

Ph: 618 783 9331










.






This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.
Re: on address bar in Google chrome

Van Lant, Robin
 

Try F6

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kevin Meyers
Sent: Thursday, March 28, 2019 11:03 AM
To: jfw@groups.io
Subject: on address bar in Google chrome

 

Hello, When on Google Chrome I press alt D to move to the address bar to get the site address. I’m unable to get off the address bar. I tried tab and arrow keys. Nothing happens. Is there a key stroke I need to use to get off the address bar and back onto the web page? Thanks, Kevin



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.
Re: on address bar in Google chrome

Sieghard Weitzel
 

Just F6 is what you need

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Thursday, March 28, 2019 10:33 AM
To: main@jfw.groups.io
Subject: Re: on address bar in Google chrome

 

Try CONTROL plus F6.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kevin Meyers
Sent: Thursday, March 28, 2019 10:03 AM
To: jfw@groups.io
Subject: on address bar in Google chrome

 

Hello, When on Google Chrome I press alt D to move to the address bar to get the site address. I’m unable to get off the address bar. I tried tab and arrow keys. Nothing happens. Is there a key stroke I need to use to get off the address bar and back onto the web page? Thanks, Kevin
Re: on address bar in Google chrome

Bill White <billwhite92701@...>
 

Try CONTROL plus F6.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kevin Meyers
Sent: Thursday, March 28, 2019 10:03 AM
To: jfw@groups.io
Subject: on address bar in Google chrome

 

Hello, When on Google Chrome I press alt D to move to the address bar to get the site address. I’m unable to get off the address bar. I tried tab and arrow keys. Nothing happens. Is there a key stroke I need to use to get off the address bar and back onto the web page? Thanks, Kevin
Re: on address bar in Google chrome

Alan Robbins
 

Try F6

On Mar 28, 2019, at 1:02 PM, Kevin Meyers <kevinmeyers@...> wrote:

Hello, When on Google Chrome I press alt D to move to the address bar to get the site address. I’m unable to get off the address bar. I tried tab and arrow keys. Nothing happens. Is there a key stroke I need to use to get off the address bar and back onto the web page? Thanks, Kevin
on address bar in Google chrome

Kevin Meyers <kevinmeyers@...>
 

Hello, When on Google Chrome I press alt D to move to the address bar to get the site address. I’m unable to get off the address bar. I tried tab and arrow keys. Nothing happens. Is there a key stroke I need to use to get off the address bar and back onto the web page? Thanks, Kevin
Re: Creating keyboard shortcuts

Bill White <billwhite92701@...>
 

Hi, David. What operating System are you using. Since you didn't specify, I
will assume Windows 10.

How To Create Shortcuts


one thing Windows 10 doesn't provide is a way to create a shortcut to apps
so you can launch them from the desktop or elsewhere.

Or, at least an obvious way.

But as it turns out, all of the applications installed on your PC, including
the universal apps that come with Windows 10 or are downloaded from Windows
Store are accessible from a hidden shell view called Applications. Once you
open this view in File Explorer, you can create shortcuts for any of them.
Open the Run dialog (Windows+R=run), type in:
shell:AppsFolder

and then press enter to view this folder.

apps-folder

Find an app you wish to create a shortcut for, right-click (applications
key, or, shift+f10 and choose Create shortcut from the pop-up menu that
appears.

You'll be prompted that the shortcut cannot be placed here, and Windows will
recommend placing it on the desktop instead. Press enter on Yes. A shortcut
with the name App-Name Shortcut (Mail Shortcut) will appear on the desktop.
You can leave this as-is, or rename it (I usually remove the word,
Shortcut). And you can of course move the shortcut to any folder as needed.

Now, just repeat for all the app shortcuts you need.

Bill White

billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of David
Pearson
Sent: Thursday, March 28, 2019 9:45 AM
To: main@jfw.groups.io
Subject: Creating keyboard shortcuts

Hello group:

Somewhere along the way, 2 keyboard shortcuts which were created to open 2
of my programs have somehow disappeared.

They each consisted of alt + cntrl+ program letter(in sequence), and I would

like to have them back, but don't know step-by-step procedure to do this, so

would welcome any assistance.

Nost sincerely,



David S. Pearson
19841 - 19860 of 88227