Date   

Re: Problem using Word 2016

mike mcglashon
 

I have this problem whenst moving word by word;
Jaws2019 word2016 and windows 10;
Jaws will say nothing as I ctrol-left and right arrows;,
Like it loses its place or something.


Mike mcglashon
Email: Michael.mcglashon@comcast.net
Ph: 618 783 9331

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ann Byrne
Sent: Thursday, January 31, 2019 10:19 AM
To: main@jfw.groups.io
Subject: Re: Problem using Word 2016

JAWS2019 is struggling with Word for me, as well. sometimes it reports that
a page is blank, when NVDA and Narrator can read a pageful of text.
Unload/reload is the only solution I have found.
At 09:05 AM 1/31/2019, you wrote:
Hello, For some reason I will be in Word 2016 and Outlook 2016. I'm
using Windows10 and Jaws 2018. I will flip back and forth between word
and outlook. Eventually Jaws has a hard time reading when I arrow up or
down. Sometimes I can read the line and sometimes it cannot. Many times
I cann't even move word by word. I can unload Jaws and reload and the
problem goes away for a few minutes. Then it comes back and unloading
Jaws doesn't work. I then have to close out of everything and reboot.
What could be causing this problem.
Microsoft accessibility cannot determine what is causing the problem.
Thanks, Kevin


Re: Problem using Word 2016

Ann Byrne
 

JAWS2019 is struggling with Word for me, as well. sometimes it reports that a page is blank, when NVDA and Narrator can read a pageful of text. Unload/reload is the only solution I have found.

At 09:05 AM 1/31/2019, you wrote:
Hello, For some reason I will be in Word 2016 and Outlook 2016. I'm using Windows10 and Jaws 2018. I will flip back and forth between word and outlook. Eventually Jaws has a hard time reading when I arrow up or down. Sometimes I can read the line and sometimes it cannot. Many times I cann't even move word by word. I can unload Jaws and reload and the problem goes away for a few minutes. Then it comes back and unloading Jaws doesn't work. I then have to close out of everything and reboot. What could be causing this problem. Microsoft accessibility cannot determine what is causing the problem. Thanks, Kevin


Re: Problem using Word 2016

Kimber Gardner
 

Kevin,

I wish I had the answer. I experience the same behavior with the 2016
suite of office apps, except I see the freezing when using an emulator
app called attachmate. It's incredibly frustrating to say the least. I
have reported it to FS, but felt as if I was not taken very seriously.

Kim

On 1/31/19, Kevin Meyers <kevinmeyers@wi.rr.com> wrote:
Hello, For some reason I will be in Word 2016 and Outlook 2016. I'm using
Windows10 and Jaws 2018. I will flip back and forth between word and
outlook. Eventually Jaws has a hard time reading when I arrow up or down.
Sometimes I can read the line and sometimes it cannot. Many times I cann't
even move word by word. I can unload Jaws and reload and the problem goes
away for a few minutes. Then it comes back and unloading Jaws doesn't work.
I then have to close out of everything and reboot. What could be causing
this problem. Microsoft accessibility cannot determine what is causing the
problem. Thanks, Kevin




--
Kimberly


Problem using Word 2016

Kevin Meyers <kevinmeyers@...>
 

Hello, For some reason I will be in Word 2016 and Outlook 2016. I’m using Windows10 and Jaws 2018. I will flip back and forth between word and outlook. Eventually Jaws has a hard time reading when I arrow up or down. Sometimes I can read the line and sometimes it cannot. Many times I cann’t even move word by word. I can unload Jaws and reload and the problem goes away for a few minutes. Then it comes back and unloading Jaws doesn’t work. I then have to close out of everything and reboot. What could be causing this problem. Microsoft accessibility cannot determine what is causing the problem. Thanks, Kevin


Re: For a friend Jaws 2019 How to turns off jaws 2019 to run jaws 2018 ?

O.Addison Gethers
 

Not really I already explained what I heard on my friend computer she does
have jaws 2018 and jaws2019 on her computer.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Joseph
Hudson
Sent: Wednesday, January 30, 2019 4:26 PM
To: main@jfw.groups.io
Subject: Re: For a friend Jaws 2019 How to turns off jaws 2019 to run jaws
2018 ?

Hi, I agree with you Dave. Matter fact never I used to use Windows as my
computing machine, this is exactly what I would do.
On Jan 30, 2019, at 3:11 PM, Dave... <dgcarlson@sbcglobal.net> wrote:

Sounds like JAWS 2018 is not installed any more. Likely the technician
replaced 2018 with 2019. Tell her to move on -- its the same product, just
with more features and less bugs.

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer


----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@gmail.com>
To: <main@jfw.groups.io>
Sent: Wednesday, January 30, 2019 13:05
Subject: Re: For a friend Jaws 2019 How to turns off jaws 2019 to run jaws
2018 ?


Hi When she unload jaws 2019 then press window R type in jaws2018 when
she shut down her computer or restart computer jaws 2019 come back on
instead of jaws 2018 I hope I say it right.
Addison


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Lee
Maschmeyer
Sent: Wednesday, January 30, 2019 2:55 PM
To: main@jfw.groups.io
Subject: Re: For a friend Jaws 2019 How to turns off jaws 2019 to run jaws
2018 ?

Hi Addison,

My favorite way to quit Jaws is to hit Insert+F4 which puts you on the
OK button to quit Jaws. Then use Windows+R to bring up thee Run dialogue
and type "jaws" (no quotes) and the version number you want to start,
such as jaws2018.

HTH,

--

Lee Maschmeyer

"Never imagine yourself not to be otherwise than what it might appear to
others that what you were or might have been was not otherwise than what
you had been would have appeared to them to be otherwise."
--Lewis Carroll











Re: For a friend Jaws 2019 How to turns off jaws 2019 to run jaws 2018 ?

Joseph Hudson
 

Hi, I agree with you Dave. Matter fact never I used to use Windows as my computing machine, this is exactly what I would do.

On Jan 30, 2019, at 3:11 PM, Dave... <dgcarlson@sbcglobal.net> wrote:

Sounds like JAWS 2018 is not installed any more. Likely the technician
replaced 2018 with 2019. Tell her to move on -- its the same product, just
with more features and less bugs.

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer


----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@gmail.com>
To: <main@jfw.groups.io>
Sent: Wednesday, January 30, 2019 13:05
Subject: Re: For a friend Jaws 2019 How to turns off jaws 2019 to run jaws
2018 ?


Hi When she unload jaws 2019 then press window R type in jaws2018 when
she shut down her computer or restart computer jaws 2019 come back on
instead of jaws 2018 I hope I say it right.
Addison


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Lee
Maschmeyer
Sent: Wednesday, January 30, 2019 2:55 PM
To: main@jfw.groups.io
Subject: Re: For a friend Jaws 2019 How to turns off jaws 2019 to run jaws
2018 ?

Hi Addison,

My favorite way to quit Jaws is to hit Insert+F4 which puts you on the
OK button to quit Jaws. Then use Windows+R to bring up thee Run dialogue
and type "jaws" (no quotes) and the version number you want to start,
such as jaws2018.

HTH,

--

Lee Maschmeyer

"Never imagine yourself not to be otherwise than what it might appear to
others that what you were or might have been was not otherwise than what
you had been would have appeared to them to be otherwise."
--Lewis Carroll











Re: Microsoft Edge Under Windows 7

James Malone
 

No. Microsoft edge only runs under windows 10.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Peter
Donahue
Sent: Wednesday, January 30, 2019 11:05 PM
To: main@jfw.groups.io
Subject: Microsoft Edge Under Windows 7


Hello everyone,

We'll be upgrading to JFW 2019 on this machine later today. I know
that Microsoft Edge runs under Windows 10 but will it work under Windows 7?
We have some Websites we want to try browsing using Edge for accessibility
purposes. Otherwise I'll need to get access to a computer with Windows 10,
Microsoft Edge, and JFW 2019 installed on it to run these tests. I'm also
raising funds to buy myself a new desktop which of course would have Windows
10 and Edge installed. Thanks for your help.

Peter Donahue


Re: For a friend Jaws 2019 How to turns off jaws 2019 to run jaws 2018 ?

O.Addison Gethers
 

Dave I don't think she have keyboard short cut on desktop computer.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Dave...
Sent: Thursday, January 31, 2019 1:52 AM
To: main@jfw.groups.io
Subject: Re: For a friend Jaws 2019 How to turns off jaws 2019 to run jaws
2018 ?

...those are just the desktop shortcuts.

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer


----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@gmail.com>
To: <main@jfw.groups.io>
Sent: Wednesday, January 30, 2019 15:59
Subject: Re: For a friend Jaws 2019 How to turns off jaws 2019 to run jaws
2018 ?


Hey Dave I heard when she on her computer with her speaker phone when I ask
her to go on desktop by press window m it's say desktop then I ask her
press letter j one time it's say jaws 2018 then she press letter j again
it's say jaws 2019


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Dave...
Sent: Wednesday, January 30, 2019 4:12 PM
To: main@jfw.groups.io
Subject: Re: For a friend Jaws 2019 How to turns off jaws 2019 to run jaws
2018 ?

Sounds like JAWS 2018 is not installed any more. Likely the technician
replaced 2018 with 2019. Tell her to move on -- its the same product, just
with more features and less bugs.

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer


----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@gmail.com>
To: <main@jfw.groups.io>
Sent: Wednesday, January 30, 2019 13:05
Subject: Re: For a friend Jaws 2019 How to turns off jaws 2019 to run jaws
2018 ?


Hi When she unload jaws 2019 then press window R type in jaws2018 when
she shut down her computer or restart computer jaws 2019 come back on
instead of jaws 2018 I hope I say it right.
Addison


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Lee
Maschmeyer
Sent: Wednesday, January 30, 2019 2:55 PM
To: main@jfw.groups.io
Subject: Re: For a friend Jaws 2019 How to turns off jaws 2019 to run jaws
2018 ?

Hi Addison,

My favorite way to quit Jaws is to hit Insert+F4 which puts you on the
OK button to quit Jaws. Then use Windows+R to bring up thee Run dialogue
and type "jaws" (no quotes) and the version number you want to start,
such as jaws2018.

HTH,

--

Lee Maschmeyer

"Never imagine yourself not to be otherwise than what it might appear to
others that what you were or might have been was not otherwise than what
you had been would have appeared to them to be otherwise."
--Lewis Carroll


Re: Problem with Bitlocker

Denis Sariyannis <denis.sariyannis@...>
 

I think it only happens under Windows 10. I haven't found a way to get
around this using JAWS yet.

2019-01-28 17:23 GMT+01:00, Van Lant, Robin via Groups.Io
<Robin_Van_Lant=Key.com@groups.io>:

Hmmm... I have bitlocker for my hard drive at work and do not have focus
issues, but maybe it's different for just a partition.



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Denis Sariyannis
Sent: Monday, January 28, 2019 4:01 AM
To: main@jfw.groups.io
Subject: Problem with Bitlocker

Hi all,
does anybody know if it is possible to unlock a Bitlocker partition with
JAWS 2018? Whenever I want to open such a partition the focus jumps into the
password field for a moment but immediately jumps to another element of the
screen. It seems to be impossible to enter a password there so I have to use
NVDA or Narrator to do this right now.

Best regards
Denis

--
Denis Sariyannis
Mail: denis.sariyannis@gmail.com
Phone: +49 6227 6982766
Mobile: +49 176 66830900





This communication may contain privileged and/or confidential information.
It is intended solely for the use of the addressee. If you are not the
intended recipient, you are strictly prohibited from disclosing, copying,
distributing or using any of this information. If you received this
communication in error, please contact the sender immediately and destroy
the material in its entirety, whether electronic or hard copy. This
communication may contain nonpublic personal information about consumers
subject to the restrictions of the Gramm-Leach-Bliley Act. You may not
directly or indirectly reuse or redisclose such information for any purpose
other than to provide the services for which you are receiving the
information.

127 Public Square, Cleveland, OH 44114
If you prefer not to receive future e-mail offers for products or services
from Key
send an e-mail to mailto:DNERequests@key.com with 'No Promotional E-mails'
in the
SUBJECT line.



--
Denis Sariyannis
Mail: denis.sariyannis@gmail.com
Phone: +49 6227 6982766
Mobile: +49 176 66830900


JAWS and videos

Jim Portillo
 

Hi there,

I seem to remember someone asking about some ways of navigating YouTube with JAWS, and Cathy Anne provided some wonderful commands that work super well.
However, I’m needing to know how to work videos that are either in Vimeo or perhaps that use Flash Player. I’ve done everything I can think of in JAWS when watching them, but I can’t seem to get anything working in the way of fast forwarding, rewinding, pausing, etc.
Are there any good commands or tutorials? I seem to have many videos or sites that now use Vimeo or Flash player in addition to the YouTube videos.
Any help would be appreciated.


Sent from my iPhone 7!


Re: Microsoft Edge Under Windows 7

 

No, Edge is part of Windows 10 only.
Better to use Chrome, very accessible, very fast and the most used browser out there.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Peter Donahue
Sent: Wednesday, January 30, 2019 11:05 PM
To: main@jfw.groups.io
Subject: Microsoft Edge Under Windows 7


Hello everyone,

We'll be upgrading to JFW 2019 on this machine later today. I know that Microsoft Edge runs under Windows 10 but will it work under Windows 7?
We have some Websites we want to try browsing using Edge for accessibility purposes. Otherwise I'll need to get access to a computer with Windows 10, Microsoft Edge, and JFW 2019 installed on it to run these tests. I'm also raising funds to buy myself a new desktop which of course would have Windows
10 and Edge installed. Thanks for your help.

Peter Donahue


Microsoft Edge Under Windows 7

Peter Donahue
 

Hello everyone,

We'll be upgrading to JFW 2019 on this machine later today. I know
that Microsoft Edge runs under Windows 10 but will it work under Windows 7?
We have some Websites we want to try browsing using Edge for accessibility
purposes. Otherwise I'll need to get access to a computer with Windows 10,
Microsoft Edge, and JFW 2019 installed on it to run these tests. I'm also
raising funds to buy myself a new desktop which of course would have Windows
10 and Edge installed. Thanks for your help.

Peter Donahue


Re: For a friend Jaws 2019 How to turns off jaws 2019 to run jaws 2018 ?

Dave...
 

...those are just the desktop shortcuts.

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@gmail.com>
To: <main@jfw.groups.io>
Sent: Wednesday, January 30, 2019 15:59
Subject: Re: For a friend Jaws 2019 How to turns off jaws 2019 to run jaws
2018 ?


Hey Dave I heard when she on her computer with her speaker phone when I ask
her to go on desktop by press window m it's say desktop then I ask her
press letter j one time it's say jaws 2018 then she press letter j again
it's say jaws 2019


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Dave...
Sent: Wednesday, January 30, 2019 4:12 PM
To: main@jfw.groups.io
Subject: Re: For a friend Jaws 2019 How to turns off jaws 2019 to run jaws
2018 ?

Sounds like JAWS 2018 is not installed any more. Likely the technician
replaced 2018 with 2019. Tell her to move on -- its the same product, just
with more features and less bugs.

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer


----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@gmail.com>
To: <main@jfw.groups.io>
Sent: Wednesday, January 30, 2019 13:05
Subject: Re: For a friend Jaws 2019 How to turns off jaws 2019 to run jaws
2018 ?


Hi When she unload jaws 2019 then press window R type in jaws2018 when
she shut down her computer or restart computer jaws 2019 come back on
instead of jaws 2018 I hope I say it right.
Addison


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Lee
Maschmeyer
Sent: Wednesday, January 30, 2019 2:55 PM
To: main@jfw.groups.io
Subject: Re: For a friend Jaws 2019 How to turns off jaws 2019 to run jaws
2018 ?

Hi Addison,

My favorite way to quit Jaws is to hit Insert+F4 which puts you on the
OK button to quit Jaws. Then use Windows+R to bring up thee Run dialogue
and type "jaws" (no quotes) and the version number you want to start,
such as jaws2018.

HTH,

--

Lee Maschmeyer

"Never imagine yourself not to be otherwise than what it might appear to
others that what you were or might have been was not otherwise than what
you had been would have appeared to them to be otherwise."
--Lewis Carroll


Re: is there a way to name the screen shot after it is taken?

 

Once you go to the Screenshots folder in Pictures the screenshots you have are just image files in PNG format and you can press F2 just like with any file and name it whatever you want.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Ingram
Sent: Wednesday, January 30, 2019 7:54 PM
To: main@jfw.groups.io
Subject: is there a way to name the screen shot after it is taken?

Hi list members, is there a way to name the screen shot after it is taken. As an example, can you useiseemusic.org is the page and I want to send it can I just do that?


is there a way to name the screen shot after it is taken?

David Ingram
 

Hi list members, is there a way to name the screen shot after it is taken. As an example, can you useiseemusic.org is the page and I want to send it can I just do that?


Re: how do you get screen shot of a web page?

 

Thanks, maybe that is the issue although it’s not really an issue. Anyways, I don’t get any message when I press this key combination to enable gaming features.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Vogel
Sent: Wednesday, January 30, 2019 7:25 PM
To: main@jfw.groups.io
Subject: Re: how do you get screen shot of a web page?

 

Sieghard,

          I just tried it on one of my machines that recently went to 1809, and got a message that "gaming features must be enabled" when I hit WinKey+ALT+PrtSc, and was presented a checkbox to enable them.  Once I did, the screen capture completed.  That's the first time I recall having that come up.

           In looking at Settings afterward, it appears this is part of Settings, Gaming, Captures Pane.   There's an entry there that starts, "Save screenshots and game clips in:" followed by the folder name, which happens to be Videos\Captures.

--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

   Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, and wrong.

         ~ H.L. Mencken, AKA The Sage of Baltimore


Re: how do you get screen shot of a web page?

 

Sieghard,

          I just tried it on one of my machines that recently went to 1809, and got a message that "gaming features must be enabled" when I hit WinKey+ALT+PrtSc, and was presented a checkbox to enable them.  Once I did, the screen capture completed.  That's the first time I recall having that come up.

           In looking at Settings afterward, it appears this is part of Settings, Gaming, Captures Pane.   There's an entry there that starts, "Save screenshots and game clips in:" followed by the folder name, which happens to be Videos\Captures.

--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

   Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, and wrong.

         ~ H.L. Mencken, AKA The Sage of Baltimore


Re: how do you get screen shot of a web page?

 

Sieghard,

         It's not the first time that either one of my machines, or someone else's, exhibits behaviors inconsistent with what I generally see.  But all I can say is the command works on three different HP laptops, a Toshiba laptop all running Win10 Home 64-bit, and an ancient Gateway desktop running Win10 Pro 32-bit.
--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

   Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, and wrong.

         ~ H.L. Mencken, AKA The Sage of Baltimore


Re: how do you get screen shot of a web page?

 

Hi Brian,

 

I think we discussed this before, but I have never been able to reproduce your Win Key+Alt+Printscreen command with a screenshot going into Videos > Captures

I just tried it again and that command doesn’t seem to do anything for me and it certainly puts nothing into my videos > captures folder.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Vogel
Sent: Wednesday, January 30, 2019 9:13 AM
To: main@jfw.groups.io
Subject: Re: how do you get screen shot of a web page?

 

I need to save this after I put it out here today:

For Any version of Windows:

  1. PrtSc (Print Screen) key captures a full-screen screenshot to the clipboard.
  2. ALT+PrtSc captures a windowed screenshot (e.g, only your non-maximized File Explorer, or web browser, or dialog box with focus) to the clipboard.

You can then open any program of your choosing where an image is paste-able and paste away.  Save if necessary, and it probably will be.

For Windows 10:

  1. WinKey+PrtSc will take a full screen screenshot.  This will be placed in the Pictures library, Screenshots folder, in PNG file format.  Files will be named Screenshot(N), where N will be populated with integer numbers starting with 1.
  2. WinKey+ALT+PrtSc will take a windowed screenshot.  This will be placed in the Videos library, Captures folder, in PNG file format.  Files will be named based upon the window title or dialog title coupled with a date-time stamp after that.  [On every machine I've dealt with so far, these screenshots involve the use of Xbox, indirectly, and they've always ended up in Videos\Captures.]


--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

   Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, and wrong.

         ~ H.L. Mencken, AKA The Sage of Baltimore


Re: different versions of Jaws with Bookshare

Feliciano G
 

Hi,
What type of issues? No problems here using Google Chrome, JAWS 2018 on Windows 10.

Regards,
Feliciano
For tech tips and updates, LIKE www.facebook.com/theblindman12v

On Jan 30, 2019, at 6:39 PM, Sharon <mt281820@...> wrote:

I've been having major issues with Bookshare using Jaws 2018 but not Jaws 17.
Have not tried 2019 yet.
Strange for sure.
Sharon




19981 - 20000 of 86850