Date   

Cannot Read Scan History

Rick Miller
 

Dear Listers:

 

I have just recently updated Windows 10, and have also updated Windows Defender, my antiviral program.  When I try to examine the scan history, JAWS will not work.  When I get to the Windows Defender Scan Center, I hit the enter key when I hear Viral Protection.  As soon as I do, JAWS says “Link, Scan History.”  When I hit the enter key, nothing seems to happen.  If any of you use Windows Defender, can you tell me what to do to resolve this?  By the way, I am using JAWS 2019.

 

 

 

Rick Miller

 


Re: Speaking ProblemWith New Windows 10 Computer

Bill White <billwhite92701@...>
 

Hi, Tom. There is a program called Silenzio which is supposed to keep the sound card from going to sleep.

 

Try downloading it from the following link.

 

Download Silenzio here

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Thursday, December 13, 2018 5:41 PM
To: main@jfw.groups.io
Subject: Re: Speaking ProblemWith New Windows 10 Computer

 

Bill:

 

It happens with Narrator too.

 

I’m not sure what to do from here.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Thursday, December 13, 2018 8:34 PM
To: main@jfw.groups.io
Subject: Re: Speaking ProblemWith New Windows 10 Computer

 

Hi, Tom. Try turning on Narrator, and see if you get the same delay through Narrator. If so, you might have one of the sound cards which go to sleep frequently, and need to be awoken by key presses.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Thursday, December 13, 2018 5:01 PM
To: jfw list
Subject: Speaking ProblemWith New Windows 10 Computer

 

Hello, everyone.

 

As some of you may remember, I’m continuing to set up a new Dell Windows 10 computer with Jaws.

 

The computer has an Intel I7 processor, 16 gigabytes of ram, a 12 gigabyte solid-state drive, and a 1 terabyte mechanical hard drive.

 

I mention this right from the start, because this computer should have plenty of horse power to work well with Jaws.

 

I have noticed that, when typing something, after I stop using the computer for 30 seconds or so, I do not get Jaws feedback until I press at least four or five keys.  In other words, there’s a considerable delay until Jaws starts speaking again.

 

I am thinking this is a Jaws issue, but am not totally sure.

 

I’m currently using Jaws 2018, and plan to upgrade to Jaws 2019 soon, although I’m a bit hesitant to do so right now because of other known problems with Jaws 2019 and MS Word.

 

Are there some settings I should look at to try to address this issue?

 

Thanks as always!

 

Dr.  Tom Behler from Michigan

 

 


Re: OCR and JPG files

Flor Lynch
 

Many sighted people genuinely don't know the difference between photo-text and 'real' text (as we may call it), unless it is explained to them.

.JPG files can vary quite a bit in resolution, which would affect the quality of the text (if any) gleaned from converted OCR.

-----Original Message-----
From: Ann Byrne
Sent: Thursday, December 13, 2018 10:18 PM
To: main@jfw.groups.io
Subject: Re: OCR and JPG files

They are only images, yes. But sometimes they are images of
text. Why anybody would do that is beyond me, unless of course
someone took a picture of--for example--a label and wanted to send it
to someone else.
At 03:29 PM 12/13/2018, you wrote:
Hi I was always under the impression that jpg files were only photos am I wrong? From Mich.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Doering
Sent: December 13, 2018 4:28 PM
To: main@jfw.groups.io
Subject: Re: OCR and JPG files

After hitting the applications key, I am not finding a recognize with JAWS choice.

Regards,




John Doering
Administrative Pricing Asst

p. 4147783040 Extn:4063 t. 800-642-8778

NOTICE: The information contained in this email and any document attached hereto is intended only for the named recipient(s). If you are not the intended recipient, nor the employee or agent responsible for delivering this message in confidence to the intended recipient(s), you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this transmittal or its attachments is strictly prohibited. If you have received this transmittal and/or attachments in error, please notify me immediately by reply e-mail and then delete this message, including any attachments.
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ann Byrne
Sent: Thursday, December 13, 2018 2:59 PM
To: main@jfw.groups.io
Subject: Re: OCR and JPG files

I have had good experience with this. Following Don's suggestion, without opening the file press the applications key and arrow to "recognize with JAWS" or just type the letter J. For me, it worked like a charm!
At 02:41 PM 12/13/2018, you wrote:
Hello:
Can the JAWS OCR convert a JPG file and if so, what is the key strokes?

Thanks in advance,




John Doering

Administrative Pricing Asst

p. 4147783040 Extn:4063 t. 800-642-8778



NOTICE: The information contained in this email and any document
attached hereto is intended only for the named recipient(s). If you are
not the intended recipient, nor the employee or agent responsible for
delivering this message in confidence to the intended recipient(s), you
are hereby notified that you have received this transmittal in error,
and any review, dissemination, distribution or copying of this
transmittal or its attachments is strictly prohibited. If you have
received this transmittal and/or attachments in error, please notify me
immediately by reply e-mail and then delete this message, including any
attachments.










Re: OCR and JPG files

Milton Ota <mota1252@...>
 

If you are sure that a jpg file has text, you can OCR it with the onboard OCR in JAWS.

Using the application key and highlighting the jpg file, press the letter j and it should work.


Re: Any list for blind Alesa and Google Home voice controlled devices

Merv Keck <blind5sparrow@...>
 

I've seen it recently discussed on the echoing list.
main+subscribe@echoing.groups.io

It is a list for blind and visually impaired users of the Amazon line of Echo products.
Merv

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of charleseblack@att.net
Sent: Thursday, December 13, 2018 5:34 PM
To: main@jfw.groups.io
Subject: Re: Any list for blind Alesa and Google Home voice controlled devices

Does anyone have a list of alexa commands or know where to find the list?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Thursday, December 13, 2018 2:36 PM
To: main@jfw.groups.io
Subject: Re: Any list for blind Alesa and Google Home voice controlled devices

my guess is that a single mailing list would get too chaotic with discussions of everything imaginable and the moderation of the discussions?


-------- Original Message --------
From: Brian Vogel [mailto:britechguy@gmail.com]
Sent: Thu, Dec 13, 2018 2:15 PM EST
To: main@jfw.groups.io
Subject: Any list for blind Alesa and Google Home voice controlled devices

Now I'll put myself out there for flogging, but I really don't understand why there is this tendency in the blind/low-vision community to do two things:

1. Split each and every blessed technology into separate groups.
2. Avoid non-blind-specific groups for things like Google Home and
Amazon Echo, where nothing, including setup, is specific to blind users.


In any case, there is the Blind Technology group, which allows
discussion of virtually any technology you can name with an emphasis on
use of same by blind individuals. All pertinent details will be sent in
response to e-mailing: blindtech+help@groups.io
<mailto:blindtech+help@groups.io>
--

Brian *-*Windows 10 Home, 64-Bit, Version 1809, Build 17763

*/ Explanations exist; they have existed for all time; there is always
a well-known solution to every human problem — neat, plausible, and wrong./*

~ H.L. Mencken, AKA /The Sage of Baltimore/


Re: Speaking ProblemWith New Windows 10 Computer

Tom Behler
 

Bill:

 

It happens with Narrator too.

 

I’m not sure what to do from here.

 

Tom Behler

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Thursday, December 13, 2018 8:34 PM
To: main@jfw.groups.io
Subject: Re: Speaking ProblemWith New Windows 10 Computer

 

Hi, Tom. Try turning on Narrator, and see if you get the same delay through Narrator. If so, you might have one of the sound cards which go to sleep frequently, and need to be awoken by key presses.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Thursday, December 13, 2018 5:01 PM
To: jfw list
Subject: Speaking ProblemWith New Windows 10 Computer

 

Hello, everyone.

 

As some of you may remember, I’m continuing to set up a new Dell Windows 10 computer with Jaws.

 

The computer has an Intel I7 processor, 16 gigabytes of ram, a 12 gigabyte solid-state drive, and a 1 terabyte mechanical hard drive.

 

I mention this right from the start, because this computer should have plenty of horse power to work well with Jaws.

 

I have noticed that, when typing something, after I stop using the computer for 30 seconds or so, I do not get Jaws feedback until I press at least four or five keys.  In other words, there’s a considerable delay until Jaws starts speaking again.

 

I am thinking this is a Jaws issue, but am not totally sure.

 

I’m currently using Jaws 2018, and plan to upgrade to Jaws 2019 soon, although I’m a bit hesitant to do so right now because of other known problems with Jaws 2019 and MS Word.

 

Are there some settings I should look at to try to address this issue?

 

Thanks as always!

 

Dr.  Tom Behler from Michigan

 

 


Re: Speaking ProblemWith New Windows 10 Computer

Bill White <billwhite92701@...>
 

Hi, Tom. Try turning on Narrator, and see if you get the same delay through Narrator. If so, you might have one of the sound cards which go to sleep frequently, and need to be awoken by key presses.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Thursday, December 13, 2018 5:01 PM
To: jfw list
Subject: Speaking ProblemWith New Windows 10 Computer

 

Hello, everyone.

 

As some of you may remember, I’m continuing to set up a new Dell Windows 10 computer with Jaws.

 

The computer has an Intel I7 processor, 16 gigabytes of ram, a 12 gigabyte solid-state drive, and a 1 terabyte mechanical hard drive.

 

I mention this right from the start, because this computer should have plenty of horse power to work well with Jaws.

 

I have noticed that, when typing something, after I stop using the computer for 30 seconds or so, I do not get Jaws feedback until I press at least four or five keys.  In other words, there’s a considerable delay until Jaws starts speaking again.

 

I am thinking this is a Jaws issue, but am not totally sure.

 

I’m currently using Jaws 2018, and plan to upgrade to Jaws 2019 soon, although I’m a bit hesitant to do so right now because of other known problems with Jaws 2019 and MS Word.

 

Are there some settings I should look at to try to address this issue?

 

Thanks as always!

 

Dr.  Tom Behler from Michigan

 

 


Speaking ProblemWith New Windows 10 Computer

Tom Behler
 

Hello, everyone.

 

As some of you may remember, I’m continuing to set up a new Dell Windows 10 computer with Jaws.

 

The computer has an Intel I7 processor, 16 gigabytes of ram, a 12 gigabyte solid-state drive, and a 1 terabyte mechanical hard drive.

 

I mention this right from the start, because this computer should have plenty of horse power to work well with Jaws.

 

I have noticed that, when typing something, after I stop using the computer for 30 seconds or so, I do not get Jaws feedback until I press at least four or five keys.  In other words, there’s a considerable delay until Jaws starts speaking again.

 

I am thinking this is a Jaws issue, but am not totally sure.

 

I’m currently using Jaws 2018, and plan to upgrade to Jaws 2019 soon, although I’m a bit hesitant to do so right now because of other known problems with Jaws 2019 and MS Word.

 

Are there some settings I should look at to try to address this issue?

 

Thanks as always!

 

Dr.  Tom Behler from Michigan

 

 


Re: OCR and JPG files

Mario
 

John, try pressing insert+spacebar, o, f. I'm not sure if the JPG needs
to be opened with an image editor like Paint or the OCR commands can be
issued on the file without opening it first.

the synopsis for this command is "Captures an image from the selected
file in Windows Explorer and recognizes the text from the image using
the OCR component."

-------- Original Message --------
From: John Doering [mailto:john.doering@ibvi.org]
Sent: Thu, Dec 13, 2018 4:28 PM EST
To: main@jfw.groups.io
Subject: OCR and JPG files

After hitting the applications key, I am not finding a recognize with
JAWS choice.

Regards,




John Doering
Administrative Pricing Asst

p. 4147783040 Extn:4063 t. 800-642-8778

NOTICE: The information contained in this email and any document
attached hereto is intended only for the named recipient(s). If you are
not the intended recipient, nor the employee or agent responsible for
delivering this message in confidence to the intended recipient(s), you
are hereby notified that you have received this transmittal in error,
and any review, dissemination, distribution or copying of this
transmittal or its attachments is strictly prohibited. If you have
received this transmittal and/or attachments in error, please notify me
immediately by reply e-mail and then delete this message, including any
attachments.
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ann Byrne
Sent: Thursday, December 13, 2018 2:59 PM
To: main@jfw.groups.io
Subject: Re: OCR and JPG files

I have had good experience with this. Following Don's suggestion,
without opening the file press the applications key and arrow to
"recognize with JAWS" or just type the letter J. For me, it worked like
a charm!
At 02:41 PM 12/13/2018, you wrote:
Hello:
Can the JAWS OCR convert a JPG file and if so, what is the key strokes?

Thanks in advance,




John Doering

Administrative Pricing Asst

p. 4147783040 Extn:4063 t. 800-642-8778



NOTICE: The information contained in this email and any document
attached hereto is intended only for the named recipient(s). If you are
not the intended recipient, nor the employee or agent responsible for
delivering this message in confidence to the intended recipient(s), you
are hereby notified that you have received this transmittal in error,
and any review, dissemination, distribution or copying of this
transmittal or its attachments is strictly prohibited. If you have
received this transmittal and/or attachments in error, please notify me
immediately by reply e-mail and then delete this message, including any
attachments.


acurate info for the Fs openline.

Michael Munn
 

Hi all, This is Michael.
Last time I FS changed the access code for the Openline and I was not pro active
Ofcourse I learned my lesson this time and can someone provide a vallid access code for the Openline discussion?
Thanks
Best regards
Michael Munn


Re: Any list for blind Alesa and Google Home voice controlled devices

 

On Thu, Dec 13, 2018 at 04:41 PM, Cristóbal wrote:
Fragmentation becomes pointless after a while and besides, truth be told, for many of these lists, be it Jaws, iOS or blindness related tech stuff, lots of us are on these same lists anyway.
Amen!!  And essentially the same questions, where the answer on one would apply on another, get asked on multiple lists at once.

Defragmentation should be a goal, but alas, it's not.
 
--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

   Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, and wrong.

         ~ H.L. Mencken, AKA The Sage of Baltimore


Re: OCR and JPG files

Don Walls
 

Actually, my church uses a software which allows text layout as in a magazine, and the contents are not readable by a screen reader because they are captured as images. The reason for this is to allow the appearance as in a periodical but the text isn't accessible.

Don

Don

-----Original Message-----
From: Ann Byrne
Sent: Thursday, December 13, 2018 2:18 PM
To: main@jfw.groups.io
Subject: Re: OCR and JPG files

They are only images, yes. But sometimes they are images of
text. Why anybody would do that is beyond me, unless of course
someone took a picture of--for example--a label and wanted to send it
to someone else.
At 03:29 PM 12/13/2018, you wrote:
Hi I was always under the impression that jpg files were only photos am I wrong? From Mich.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Doering
Sent: December 13, 2018 4:28 PM
To: main@jfw.groups.io
Subject: Re: OCR and JPG files

After hitting the applications key, I am not finding a recognize with JAWS choice.

Regards,




John Doering
Administrative Pricing Asst

p. 4147783040 Extn:4063 t. 800-642-8778

NOTICE: The information contained in this email and any document attached hereto is intended only for the named recipient(s). If you are not the intended recipient, nor the employee or agent responsible for delivering this message in confidence to the intended recipient(s), you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this transmittal or its attachments is strictly prohibited. If you have received this transmittal and/or attachments in error, please notify me immediately by reply e-mail and then delete this message, including any attachments.
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ann Byrne
Sent: Thursday, December 13, 2018 2:59 PM
To: main@jfw.groups.io
Subject: Re: OCR and JPG files

I have had good experience with this. Following Don's suggestion, without opening the file press the applications key and arrow to "recognize with JAWS" or just type the letter J. For me, it worked like a charm!
At 02:41 PM 12/13/2018, you wrote:
Hello:
Can the JAWS OCR convert a JPG file and if so, what is the key strokes?

Thanks in advance,




John Doering

Administrative Pricing Asst

p. 4147783040 Extn:4063 t. 800-642-8778



NOTICE: The information contained in this email and any document
attached hereto is intended only for the named recipient(s). If you are
not the intended recipient, nor the employee or agent responsible for
delivering this message in confidence to the intended recipient(s), you
are hereby notified that you have received this transmittal in error,
and any review, dissemination, distribution or copying of this
transmittal or its attachments is strictly prohibited. If you have
received this transmittal and/or attachments in error, please notify me
immediately by reply e-mail and then delete this message, including any
attachments.










Re: Any list for blind Alesa and Google Home voice controlled devices

charleseblack@...
 

Does anyone have a list of alexa commands or know where to find the list?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Thursday, December 13, 2018 2:36 PM
To: main@jfw.groups.io
Subject: Re: Any list for blind Alesa and Google Home voice controlled devices

my guess is that a single mailing list would get too chaotic with discussions of everything imaginable and the moderation of the discussions?


-------- Original Message --------
From: Brian Vogel [mailto:britechguy@gmail.com]
Sent: Thu, Dec 13, 2018 2:15 PM EST
To: main@jfw.groups.io
Subject: Any list for blind Alesa and Google Home voice controlled devices

Now I'll put myself out there for flogging, but I really don't
understand why there is this tendency in the blind/low-vision community
to do two things:

1. Split each and every blessed technology into separate groups.
2. Avoid non-blind-specific groups for things like Google Home and
Amazon Echo, where nothing, including setup, is specific to blind
users.


In any case, there is the Blind Technology group, which allows
discussion of virtually any technology you can name with an emphasis on
use of same by blind individuals. All pertinent details will be sent in
response to e-mailing: blindtech+help@groups.io
<mailto:blindtech+help@groups.io>
--

Brian *-*Windows 10 Home, 64-Bit, Version 1809, Build 17763

*/ Explanations exist; they have existed for all time; there is always
a well-known solution to every human problem — neat, plausible, and wrong./*

~ H.L. Mencken, AKA /The Sage of Baltimore/


Re: OCR and JPG files

Ann Byrne
 

They are only images, yes. But sometimes they are images of text. Why anybody would do that is beyond me, unless of course someone took a picture of--for example--a label and wanted to send it to someone else.

At 03:29 PM 12/13/2018, you wrote:
Hi I was always under the impression that jpg files were only photos am I wrong? From Mich.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Doering
Sent: December 13, 2018 4:28 PM
To: main@jfw.groups.io
Subject: Re: OCR and JPG files

After hitting the applications key, I am not finding a recognize with JAWS choice.

Regards,




John Doering
Administrative Pricing Asst

p. 4147783040 Extn:4063 t. 800-642-8778

NOTICE: The information contained in this email and any document attached hereto is intended only for the named recipient(s). If you are not the intended recipient, nor the employee or agent responsible for delivering this message in confidence to the intended recipient(s), you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this transmittal or its attachments is strictly prohibited. If you have received this transmittal and/or attachments in error, please notify me immediately by reply e-mail and then delete this message, including any attachments.
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ann Byrne
Sent: Thursday, December 13, 2018 2:59 PM
To: main@jfw.groups.io
Subject: Re: OCR and JPG files

I have had good experience with this. Following Don's suggestion, without opening the file press the applications key and arrow to "recognize with JAWS" or just type the letter J. For me, it worked like a charm!
At 02:41 PM 12/13/2018, you wrote:
Hello:
Can the JAWS OCR convert a JPG file and if so, what is the key strokes?

Thanks in advance,




John Doering

Administrative Pricing Asst

p. 4147783040 Extn:4063 t. 800-642-8778



NOTICE: The information contained in this email and any document
attached hereto is intended only for the named recipient(s). If you are
not the intended recipient, nor the employee or agent responsible for
delivering this message in confidence to the intended recipient(s), you
are hereby notified that you have received this transmittal in error,
and any review, dissemination, distribution or copying of this
transmittal or its attachments is strictly prohibited. If you have
received this transmittal and/or attachments in error, please notify me
immediately by reply e-mail and then delete this message, including any
attachments.










Re: OCR and JPG files

Ann Byrne
 

Which version of JAWS do you have? I think the function was added in JAWS 18, but it might have been 2018.

At 03:28 PM 12/13/2018, you wrote:
After hitting the applications key, I am not finding a recognize with JAWS choice.

Regards,




John Doering
Administrative Pricing Asst

p. 4147783040 Extn:4063 t. 800-642-8778

NOTICE: The information contained in this email and any document attached hereto is intended only for the named recipient(s). If you are not the intended recipient, nor the employee or agent responsible for delivering this message in confidence to the intended recipient(s), you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this transmittal or its attachments is strictly prohibited. If you have received this transmittal and/or attachments in error, please notify me immediately by reply e-mail and then delete this message, including any attachments.
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ann Byrne
Sent: Thursday, December 13, 2018 2:59 PM
To: main@jfw.groups.io
Subject: Re: OCR and JPG files

I have had good experience with this. Following Don's suggestion, without opening the file press the applications key and arrow to "recognize with JAWS" or just type the letter J. For me, it worked like a charm!
At 02:41 PM 12/13/2018, you wrote:
Hello:
Can the JAWS OCR convert a JPG file and if so, what is the key strokes?

Thanks in advance,




John Doering

Administrative Pricing Asst

p. 4147783040 Extn:4063 t. 800-642-8778



NOTICE: The information contained in this email and any document
attached hereto is intended only for the named recipient(s). If you are
not the intended recipient, nor the employee or agent responsible for
delivering this message in confidence to the intended recipient(s), you
are hereby notified that you have received this transmittal in error,
and any review, dissemination, distribution or copying of this
transmittal or its attachments is strictly prohibited. If you have
received this transmittal and/or attachments in error, please notify me
immediately by reply e-mail and then delete this message, including any
attachments.






Re: OCR and JPG files

Mike B. <mike9902@...>
 


Hi John,
 
I thought the, Recognize with Jaws, feature came out with Jaws 18 but, it didn't come until Jaws2018.  You could also try using Openbook to extract any text from the file as well.
With Openbook open the file, press, Control + P, to open the print dialogue, navigate to, Freedom Import Printer, and press enter.  Wait a little bit for Openbook to get started and to scan the image.  If it finds any text it should read it.
Take care.  Go Rams!
Sent from my iBarstool.
I type out everything I want to remember. That way instead of spending a lot of time trying to remember what it was, I spend the time looking for where I saved it!

----- Original Message -----
Sent: Thursday, December 13, 2018 1:30 PM
Subject: Re: OCR and JPG files

I should of mentioned, I am using Windows 7 with JAWS 18.

Regards,




John Doering
Administrative Pricing Asst

p. 4147783040 Extn:4063  t. 800-642-8778

NOTICE: The information contained in this email and any document attached hereto is intended only for the named recipient(s). If you are not the intended recipient, nor the employee or agent responsible for delivering this message in confidence to the intended recipient(s), you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this transmittal or its attachments is strictly prohibited. If you have received this transmittal and/or attachments in error, please notify me immediately by reply e-mail and then delete this message, including any attachments.
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ann Byrne
Sent: Thursday, December 13, 2018 2:59 PM
To: main@jfw.groups.io
Subject: Re: OCR and JPG files

I have had good experience with this.  Following Don's suggestion, without opening the file press the applications key and arrow to "recognize with JAWS" or just type the letter J.  For me, it worked like a charm!
At 02:41 PM 12/13/2018, you wrote:
>Hello:
>Can the JAWS OCR convert a JPG file and if so, what is the key strokes?
>
>Thanks in advance,
>
>
>
>
>John Doering
>
>Administrative Pricing Asst
>
>p. 4147783040 Extn:4063  t. 800-642-8778
>
>
>
>NOTICE: The information contained in this email and any document
>attached hereto is intended only for the named recipient(s). If you are
>not the intended recipient, nor the employee or agent responsible for
>delivering this message in confidence to the intended recipient(s), you
>are hereby notified that you have received this transmittal in error,
>and any review, dissemination, distribution or copying of this
>transmittal or its attachments is strictly prohibited. If you have
>received this transmittal and/or attachments in error, please notify me
>immediately by reply e-mail and then delete this message, including any
>attachments.
>
>








Re: OCR and JPG files

Nermin
 

Hi Mich,

technically, you're correct. However, since a photo could also be a hpotographed copy of a document, it may well be something OCR readable.

Regards,
Nermin


Re: OCR and JPG files

Mich Verrier
 

Hi I was always under the impression that jpg files were only photos am I wrong? From Mich.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Doering
Sent: December 13, 2018 4:28 PM
To: main@jfw.groups.io
Subject: Re: OCR and JPG files

After hitting the applications key, I am not finding a recognize with JAWS choice.

Regards,




John Doering
Administrative Pricing Asst

p. 4147783040 Extn:4063 t. 800-642-8778

NOTICE: The information contained in this email and any document attached hereto is intended only for the named recipient(s). If you are not the intended recipient, nor the employee or agent responsible for delivering this message in confidence to the intended recipient(s), you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this transmittal or its attachments is strictly prohibited. If you have received this transmittal and/or attachments in error, please notify me immediately by reply e-mail and then delete this message, including any attachments.
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ann Byrne
Sent: Thursday, December 13, 2018 2:59 PM
To: main@jfw.groups.io
Subject: Re: OCR and JPG files

I have had good experience with this. Following Don's suggestion, without opening the file press the applications key and arrow to "recognize with JAWS" or just type the letter J. For me, it worked like a charm!
At 02:41 PM 12/13/2018, you wrote:
Hello:
Can the JAWS OCR convert a JPG file and if so, what is the key strokes?

Thanks in advance,




John Doering

Administrative Pricing Asst

p. 4147783040 Extn:4063 t. 800-642-8778



NOTICE: The information contained in this email and any document
attached hereto is intended only for the named recipient(s). If you are
not the intended recipient, nor the employee or agent responsible for
delivering this message in confidence to the intended recipient(s), you
are hereby notified that you have received this transmittal in error,
and any review, dissemination, distribution or copying of this
transmittal or its attachments is strictly prohibited. If you have
received this transmittal and/or attachments in error, please notify me
immediately by reply e-mail and then delete this message, including any
attachments.


Re: OCR and JPG files

Don Mauck
 

Then you
Can only use the spacebar+insert functionality.

-----Original Message-----
From: John Doering <john.doering@ibvi.org>
Sent: Thursday, December 13, 2018 2:30 PM
To: main@jfw.groups.io
Subject: Re: OCR and JPG files

I should of mentioned, I am using Windows 7 with JAWS 18.

Regards,




John Doering
Administrative Pricing Asst

p. 4147783040 Extn:4063 t. 800-642-8778

NOTICE: The information contained in this email and any document attached hereto is intended only for the named recipient(s). If you are not the intended recipient, nor the employee or agent responsible for delivering this message in confidence to the intended recipient(s), you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this transmittal or its attachments is strictly prohibited. If you have received this transmittal and/or attachments in error, please notify me immediately by reply e-mail and then delete this message, including any attachments.
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ann Byrne
Sent: Thursday, December 13, 2018 2:59 PM
To: main@jfw.groups.io
Subject: Re: OCR and JPG files

I have had good experience with this. Following Don's suggestion, without opening the file press the applications key and arrow to "recognize with JAWS" or just type the letter J. For me, it worked like a charm!
At 02:41 PM 12/13/2018, you wrote:
Hello:
Can the JAWS OCR convert a JPG file and if so, what is the key strokes?

Thanks in advance,




John Doering

Administrative Pricing Asst

p. 4147783040 Extn:4063 t. 800-642-8778



NOTICE: The information contained in this email and any document
attached hereto is intended only for the named recipient(s). If you are
not the intended recipient, nor the employee or agent responsible for
delivering this message in confidence to the intended recipient(s), you
are hereby notified that you have received this transmittal in error,
and any review, dissemination, distribution or copying of this
transmittal or its attachments is strictly prohibited. If you have
received this transmittal and/or attachments in error, please notify me
immediately by reply e-mail and then delete this message, including any
attachments.


Re: Jaws loading

Dan Longmore
 

JAWS 2019 seems faster after log in but problems and delays still remain at log on. FS had a lot of hype about start up but not as great as the hype.

Dan

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Chris Hill
Sent: Thursday, December 13, 2018 12:45 PM
To: main@jfw.groups.io
Subject: Re: Jaws loading

Just when entering my pin. Other than that, it is a lot faster.



On 12/13/2018 10:39, Don H wrote:
One of the benefits of Jaws 2019 was supposed to be faster startup. I
don't see any real difference but do see after Jaws loading speech is
choppy for a short while before working well. Anyone else seeing this?